2 * OMAP3/4 Voltage Controller (VC) structure and macro definitions
4 * Copyright (C) 2007, 2010 Texas Instruments, Inc.
5 * Rajendra Nayak <rnayak@ti.com>
6 * Lesly A M <x0080970@ti.com>
7 * Thara Gopinath <thara@ti.com>
9 * Copyright (C) 2008, 2011 Nokia Corporation
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License version
15 * 2 as published by the Free Software Foundation.
17 #ifndef __ARCH_ARM_MACH_OMAP2_VC_H
18 #define __ARCH_ARM_MACH_OMAP2_VC_H
20 #include <linux/kernel.h>
25 * struct omap_vc_common - per-VC register/bitfield data
26 * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
27 * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
28 * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
29 * @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register
30 * @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register
31 * @regaddr_shift: REGADDR field shift in PRM_VC_BYPASS_VAL register
32 * @cmd_on_shift: ON field shift in PRM_VC_CMD_VAL_* register
33 * @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register
34 * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
35 * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
36 * @i2c_cfg_reg: I2C configuration register offset
37 * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
38 * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
39 * @i2c_mcode_mask: MCODE field mask for I2C config register
41 * XXX One of cmd_on_mask and cmd_on_shift are not needed
42 * XXX VALID should probably be a shift, not a mask
44 struct omap_vc_common
{
56 u8 i2c_cfg_clear_mask
;
61 /* omap_vc_channel.flags values */
62 #define OMAP_VC_CHANNEL_DEFAULT BIT(0)
63 #define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1)
66 * struct omap_vc_channel - VC per-instance data
67 * @i2c_slave_addr: I2C slave address of PMIC for this VC channel
68 * @volt_reg_addr: voltage configuration register address
69 * @cmd_reg_addr: command configuration register address
70 * @setup_time: setup time (in sys_clk cycles) of regulator for this channel
71 * @cfg_channel: current value of VC channel configuration register
72 * @i2c_high_speed: whether or not to use I2C high-speed mode
74 * @common: pointer to VC common data for this platform
75 * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
76 * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
77 * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register
78 * @cmdval_reg: register for on/ret/off voltage level values for this channel
79 * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
80 * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
81 * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start
82 * @cfg_channel_reg: VC channel configuration register
83 * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register
84 * @flags: VC channel-specific flags (optional)
86 struct omap_vc_channel
{
94 /* register access data */
95 const struct omap_vc_common
*common
;
104 u8 cfg_channel_sa_shift
;
108 extern struct omap_vc_channel omap3_vc_mpu
;
109 extern struct omap_vc_channel omap3_vc_core
;
111 extern struct omap_vc_channel omap4_vc_mpu
;
112 extern struct omap_vc_channel omap4_vc_iva
;
113 extern struct omap_vc_channel omap4_vc_core
;
115 extern struct omap_vc_param omap3_mpu_vc_data
;
116 extern struct omap_vc_param omap3_core_vc_data
;
118 extern struct omap_vc_param omap4_mpu_vc_data
;
119 extern struct omap_vc_param omap4_iva_vc_data
;
120 extern struct omap_vc_param omap4_core_vc_data
;
122 void omap3_vc_set_pmic_signaling(int core_next_state
);
125 void omap_vc_init_channel(struct voltagedomain
*voltdm
);
126 int omap_vc_pre_scale(struct voltagedomain
*voltdm
,
127 unsigned long target_volt
,
128 u8
*target_vsel
, u8
*current_vsel
);
129 void omap_vc_post_scale(struct voltagedomain
*voltdm
,
130 unsigned long target_volt
,
131 u8 target_vsel
, u8 current_vsel
);
132 int omap_vc_bypass_scale(struct voltagedomain
*voltdm
,
133 unsigned long target_volt
);