block: move down direct IO plugging
[linux/fpc-iii.git] / arch / arm / mach-msm / board-msm7x30.c
bloba5001378135d4d3ec8615022370457a293cd14f7
1 /* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
3 * This program is free software; you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License version 2 and
5 * only version 2 as published by the Free Software Foundation.
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
15 * 02110-1301, USA.
17 #include <linux/gpio.h>
18 #include <linux/kernel.h>
19 #include <linux/irq.h>
20 #include <linux/platform_device.h>
21 #include <linux/delay.h>
22 #include <linux/io.h>
23 #include <linux/smsc911x.h>
24 #include <linux/usb/msm_hsusb.h>
25 #include <linux/clkdev.h>
26 #include <linux/memblock.h>
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30 #include <asm/memory.h>
31 #include <asm/setup.h>
33 #include <mach/board.h>
34 #include <mach/msm_iomap.h>
35 #include <mach/dma.h>
37 #include <mach/vreg.h>
38 #include "devices.h"
39 #include "gpiomux.h"
40 #include "proc_comm.h"
42 extern struct sys_timer msm_timer;
44 static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
45 struct meminfo *mi)
47 for (; tag->hdr.size; tag = tag_next(tag))
48 if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
49 tag->u.mem.start = 0;
50 tag->u.mem.size += SZ_2M;
54 static void __init msm7x30_reserve(void)
56 memblock_remove(0x0, SZ_2M);
59 static int hsusb_phy_init_seq[] = {
60 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
61 0x02, 0x36, /* Disable CDR Auto Reset feature */
65 static struct msm_otg_platform_data msm_otg_pdata = {
66 .phy_init_seq = hsusb_phy_init_seq,
67 .mode = USB_PERIPHERAL,
68 .otg_control = OTG_PHY_CONTROL,
71 struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
72 #ifdef CONFIG_SERIAL_MSM_CONSOLE
73 [49] = { /* UART2 RFR */
74 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
75 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
77 [50] = { /* UART2 CTS */
78 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
79 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
81 [51] = { /* UART2 RX */
82 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
83 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
85 [52] = { /* UART2 TX */
86 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
87 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
89 #endif
92 static struct platform_device *devices[] __initdata = {
93 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
94 &msm_device_uart2,
95 #endif
96 &msm_device_smd,
97 &msm_device_otg,
98 &msm_device_hsusb,
99 &msm_device_hsusb_host,
102 static void __init msm7x30_init_irq(void)
104 msm_init_irq();
107 static void __init msm7x30_init(void)
109 msm_device_otg.dev.platform_data = &msm_otg_pdata;
110 msm_device_hsusb.dev.parent = &msm_device_otg.dev;
111 msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
113 platform_add_devices(devices, ARRAY_SIZE(devices));
116 static void __init msm7x30_map_io(void)
118 msm_map_msm7x30_io();
119 msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
122 static void __init msm7x30_init_late(void)
124 smd_debugfs_init();
127 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
128 .atag_offset = 0x100,
129 .fixup = msm7x30_fixup,
130 .reserve = msm7x30_reserve,
131 .map_io = msm7x30_map_io,
132 .init_irq = msm7x30_init_irq,
133 .init_machine = msm7x30_init,
134 .init_late = msm7x30_init_late,
135 .timer = &msm_timer,
136 MACHINE_END
138 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
139 .atag_offset = 0x100,
140 .fixup = msm7x30_fixup,
141 .reserve = msm7x30_reserve,
142 .map_io = msm7x30_map_io,
143 .init_irq = msm7x30_init_irq,
144 .init_machine = msm7x30_init,
145 .init_late = msm7x30_init_late,
146 .timer = &msm_timer,
147 MACHINE_END
149 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
150 .atag_offset = 0x100,
151 .fixup = msm7x30_fixup,
152 .reserve = msm7x30_reserve,
153 .map_io = msm7x30_map_io,
154 .init_irq = msm7x30_init_irq,
155 .init_machine = msm7x30_init,
156 .init_late = msm7x30_init_late,
157 .timer = &msm_timer,
158 MACHINE_END