arch/arm/mach-omap1/board-generic.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-generic.c
   3  *
   4  * Modified from board-innovator1510.c
   5  *
   6  * Code for generic OMAP board. Should work on many OMAP systems where
   7  * the device drivers take care of all the necessary hardware initialization.
   8  * Do not put any board specific code to this file; create a new machine
   9  * type if you need custom low-level initializations.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15 #include <linux/gpio.h>
  16 #include <linux/kernel.h>
  17 #include <linux/init.h>
  18 #include <linux/platform_device.h>
  19
  20 #include <mach/hardware.h>
  21 #include <asm/mach-types.h>
  22 #include <asm/mach/arch.h>
  23 #include <asm/mach/map.h>
  24
  25 #include <plat/mux.h>
  26 #include <plat/board.h>
  27
  28 #include <mach/usb.h>
  29
  30 #include "common.h"
  31
  32 /* assume no Mini-AB port */
  33
  34 #ifdef CONFIG_ARCH_OMAP15XX
  35 static struct omap_usb_config generic1510_usb_config __initdata = {
  36         .register_host  = 1,
  37         .register_dev   = 1,
  38         .hmc_mode       = 16,
  39         .pins[0]        = 3,
  40 };
  41 #endif
  42
  43 #if defined(CONFIG_ARCH_OMAP16XX)
  44 static struct omap_usb_config generic1610_usb_config __initdata = {
  45 #ifdef CONFIG_USB_OTG
  46         .otg            = 1,
  47 #endif
  48         .register_host  = 1,
  49         .register_dev   = 1,
  50         .hmc_mode       = 16,
  51         .pins[0]        = 6,
  52 };
  53 #endif
  54
  55 static struct omap_board_config_kernel generic_config[] __initdata = {
  56 };
  57
  58 static void __init omap_generic_init(void)
  59 {
  60 #ifdef CONFIG_ARCH_OMAP15XX
  61         if (cpu_is_omap15xx()) {
  62                 /* mux pins for uarts */
  63                 omap_cfg_reg(UART1_TX);
  64                 omap_cfg_reg(UART1_RTS);
  65                 omap_cfg_reg(UART2_TX);
  66                 omap_cfg_reg(UART2_RTS);
  67                 omap_cfg_reg(UART3_TX);
  68                 omap_cfg_reg(UART3_RX);
  69
  70                 omap1_usb_init(&generic1510_usb_config);
  71         }
  72 #endif
  73 #if defined(CONFIG_ARCH_OMAP16XX)
  74         if (!cpu_is_omap1510()) {
  75                 omap1_usb_init(&generic1610_usb_config);
  76         }
  77 #endif
  78
  79         omap_board_config = generic_config;
  80         omap_board_config_size = ARRAY_SIZE(generic_config);
  81         omap_serial_init();
  82         omap_register_i2c_bus(1, 100, NULL, 0);
  83 }
  84
  85 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
  86         /* Maintainer: Tony Lindgren <tony@atomide.com> */
  87         .atag_offset    = 0x100,
  88         .map_io         = omap16xx_map_io,
  89         .init_early     = omap1_init_early,
  90         .reserve        = omap_reserve,
  91         .init_irq       = omap1_init_irq,
  92         .init_machine   = omap_generic_init,
  93         .init_late      = omap1_init_late,
  94         .timer          = &omap1_timer,
  95         .restart        = omap1_restart,
  96 MACHINE_END