kernel/sys.c

   1 /*
   2  *  linux/kernel/sys.c
   3  *
   4  *  Copyright (C) 1991, 1992  Linus Torvalds
   5  */
   6
   7 #include <linux/config.h>
   8 #include <linux/module.h>
   9 #include <linux/mm.h>
  10 #include <linux/utsname.h>
  11 #include <linux/mman.h>
  12 #include <linux/smp_lock.h>
  13 #include <linux/notifier.h>
  14 #include <linux/reboot.h>
  15 #include <linux/prctl.h>
  16 #include <linux/init.h>
  17 #include <linux/highuid.h>
  18 #include <linux/fs.h>
  19 #include <linux/kernel.h>
  20 #include <linux/kexec.h>
  21 #include <linux/workqueue.h>
  22 #include <linux/capability.h>
  23 #include <linux/device.h>
  24 #include <linux/key.h>
  25 #include <linux/times.h>
  26 #include <linux/posix-timers.h>
  27 #include <linux/security.h>
  28 #include <linux/dcookies.h>
  29 #include <linux/suspend.h>
  30 #include <linux/tty.h>
  31 #include <linux/signal.h>
  32 #include <linux/cn_proc.h>
  33
  34 #include <linux/compat.h>
  35 #include <linux/syscalls.h>
  36 #include <linux/kprobes.h>
  37
  38 #include <asm/uaccess.h>
  39 #include <asm/io.h>
  40 #include <asm/unistd.h>
  41
  42 #ifndef SET_UNALIGN_CTL
  43 # define SET_UNALIGN_CTL(a,b)   (-EINVAL)
  44 #endif
  45 #ifndef GET_UNALIGN_CTL
  46 # define GET_UNALIGN_CTL(a,b)   (-EINVAL)
  47 #endif
  48 #ifndef SET_FPEMU_CTL
  49 # define SET_FPEMU_CTL(a,b)     (-EINVAL)
  50 #endif
  51 #ifndef GET_FPEMU_CTL
  52 # define GET_FPEMU_CTL(a,b)     (-EINVAL)
  53 #endif
  54 #ifndef SET_FPEXC_CTL
  55 # define SET_FPEXC_CTL(a,b)     (-EINVAL)
  56 #endif
  57 #ifndef GET_FPEXC_CTL
  58 # define GET_FPEXC_CTL(a,b)     (-EINVAL)
  59 #endif
  60
  61 /*
  62  * this is where the system-wide overflow UID and GID are defined, for
  63  * architectures that now have 32-bit UID/GID but didn't in the past
  64  */
  65
  66 int overflowuid = DEFAULT_OVERFLOWUID;
  67 int overflowgid = DEFAULT_OVERFLOWGID;
  68
  69 #ifdef CONFIG_UID16
  70 EXPORT_SYMBOL(overflowuid);
  71 EXPORT_SYMBOL(overflowgid);
  72 #endif
  73
  74 /*
  75  * the same as above, but for filesystems which can only store a 16-bit
  76  * UID and GID. as such, this is needed on all architectures
  77  */
  78
  79 int fs_overflowuid = DEFAULT_FS_OVERFLOWUID;
  80 int fs_overflowgid = DEFAULT_FS_OVERFLOWUID;
  81
  82 EXPORT_SYMBOL(fs_overflowuid);
  83 EXPORT_SYMBOL(fs_overflowgid);
  84
  85 /*
  86  * this indicates whether you can reboot with ctrl-alt-del: the default is yes
  87  */
  88
  89 int C_A_D = 1;
  90 int cad_pid = 1;
  91
  92 /*
  93  *      Notifier list for kernel code which wants to be called
  94  *      at shutdown. This is used to stop any idling DMA operations
  95  *      and the like.
  96  */
  97
  98 static struct notifier_block *reboot_notifier_list;
  99 static DEFINE_RWLOCK(notifier_lock);
 100
 101 /**
 102  *      notifier_chain_register - Add notifier to a notifier chain
 103  *      @list: Pointer to root list pointer
 104  *      @n: New entry in notifier chain
 105  *
 106  *      Adds a notifier to a notifier chain.
 107  *
 108  *      Currently always returns zero.
 109  */
 110
 111 int notifier_chain_register(struct notifier_block **list, struct notifier_block *n)
 112 {
 113         write_lock(&notifier_lock);
 114         while(*list)
 115         {
 116                 if(n->priority > (*list)->priority)
 117                         break;
 118                 list= &((*list)->next);
 119         }
 120         n->next = *list;
 121         *list=n;
 122         write_unlock(&notifier_lock);
 123         return 0;
 124 }
 125
 126 EXPORT_SYMBOL(notifier_chain_register);
 127
 128 /**
 129  *      notifier_chain_unregister - Remove notifier from a notifier chain
 130  *      @nl: Pointer to root list pointer
 131  *      @n: New entry in notifier chain
 132  *
 133  *      Removes a notifier from a notifier chain.
 134  *
 135  *      Returns zero on success, or %-ENOENT on failure.
 136  */
 137
 138 int notifier_chain_unregister(struct notifier_block **nl, struct notifier_block *n)
 139 {
 140         write_lock(&notifier_lock);
 141         while((*nl)!=NULL)
 142         {
 143                 if((*nl)==n)
 144                 {
 145                         *nl=n->next;
 146                         write_unlock(&notifier_lock);
 147                         return 0;
 148                 }
 149                 nl=&((*nl)->next);
 150         }
 151         write_unlock(&notifier_lock);
 152         return -ENOENT;
 153 }
 154
 155 EXPORT_SYMBOL(notifier_chain_unregister);
 156
 157 /**
 158  *      notifier_call_chain - Call functions in a notifier chain
 159  *      @n: Pointer to root pointer of notifier chain
 160  *      @val: Value passed unmodified to notifier function
 161  *      @v: Pointer passed unmodified to notifier function
 162  *
 163  *      Calls each function in a notifier chain in turn.
 164  *
 165  *      If the return value of the notifier can be and'd
 166  *      with %NOTIFY_STOP_MASK, then notifier_call_chain
 167  *      will return immediately, with the return value of
 168  *      the notifier function which halted execution.
 169  *      Otherwise, the return value is the return value
 170  *      of the last notifier function called.
 171  */
 172
 173 int __kprobes notifier_call_chain(struct notifier_block **n, unsigned long val, void *v)
 174 {
 175         int ret=NOTIFY_DONE;
 176         struct notifier_block *nb = *n;
 177
 178         while(nb)
 179         {
 180                 ret=nb->notifier_call(nb,val,v);
 181                 if(ret&NOTIFY_STOP_MASK)
 182                 {
 183                         return ret;
 184                 }
 185                 nb=nb->next;
 186         }
 187         return ret;
 188 }
 189
 190 EXPORT_SYMBOL(notifier_call_chain);
 191
 192 /**
 193  *      register_reboot_notifier - Register function to be called at reboot time
 194  *      @nb: Info about notifier function to be called
 195  *
 196  *      Registers a function with the list of functions
 197  *      to be called at reboot time.
 198  *
 199  *      Currently always returns zero, as notifier_chain_register
 200  *      always returns zero.
 201  */
 202
 203 int register_reboot_notifier(struct notifier_block * nb)
 204 {
 205         return notifier_chain_register(&reboot_notifier_list, nb);
 206 }
 207
 208 EXPORT_SYMBOL(register_reboot_notifier);
 209
 210 /**
 211  *      unregister_reboot_notifier - Unregister previously registered reboot notifier
 212  *      @nb: Hook to be unregistered
 213  *
 214  *      Unregisters a previously registered reboot
 215  *      notifier function.
 216  *
 217  *      Returns zero on success, or %-ENOENT on failure.
 218  */
 219
 220 int unregister_reboot_notifier(struct notifier_block * nb)
 221 {
 222         return notifier_chain_unregister(&reboot_notifier_list, nb);
 223 }
 224
 225 EXPORT_SYMBOL(unregister_reboot_notifier);
 226
 227 static int set_one_prio(struct task_struct *p, int niceval, int error)
 228 {
 229         int no_nice;
 230
 231         if (p->uid != current->euid &&
 232                 p->euid != current->euid && !capable(CAP_SYS_NICE)) {
 233                 error = -EPERM;
 234                 goto out;
 235         }
 236         if (niceval < task_nice(p) && !can_nice(p, niceval)) {
 237                 error = -EACCES;
 238                 goto out;
 239         }
 240         no_nice = security_task_setnice(p, niceval);
 241         if (no_nice) {
 242                 error = no_nice;
 243                 goto out;
 244         }
 245         if (error == -ESRCH)
 246                 error = 0;
 247         set_user_nice(p, niceval);
 248 out:
 249         return error;
 250 }
 251
 252 asmlinkage long sys_setpriority(int which, int who, int niceval)
 253 {
 254         struct task_struct *g, *p;
 255         struct user_struct *user;
 256         int error = -EINVAL;
 257
 258         if (which > 2 || which < 0)
 259                 goto out;
 260
 261         /* normalize: avoid signed division (rounding problems) */
 262         error = -ESRCH;
 263         if (niceval < -20)
 264                 niceval = -20;
 265         if (niceval > 19)
 266                 niceval = 19;
 267
 268         read_lock(&tasklist_lock);
 269         switch (which) {
 270                 case PRIO_PROCESS:
 271                         if (!who)
 272                                 who = current->pid;
 273                         p = find_task_by_pid(who);
 274                         if (p)
 275                                 error = set_one_prio(p, niceval, error);
 276                         break;
 277                 case PRIO_PGRP:
 278                         if (!who)
 279                                 who = process_group(current);
 280                         do_each_task_pid(who, PIDTYPE_PGID, p) {
 281                                 error = set_one_prio(p, niceval, error);
 282                         } while_each_task_pid(who, PIDTYPE_PGID, p);
 283                         break;
 284                 case PRIO_USER:
 285                         user = current->user;
 286                         if (!who)
 287                                 who = current->uid;
 288                         else
 289                                 if ((who != current->uid) && !(user = find_user(who)))
 290                                         goto out_unlock;        /* No processes for this user */
 291
 292                         do_each_thread(g, p)
 293                                 if (p->uid == who)
 294                                         error = set_one_prio(p, niceval, error);
 295                         while_each_thread(g, p);
 296                         if (who != current->uid)
 297                                 free_uid(user);         /* For find_user() */
 298                         break;
 299         }
 300 out_unlock:
 301         read_unlock(&tasklist_lock);
 302 out:
 303         return error;
 304 }
 305
 306 /*
 307  * Ugh. To avoid negative return values, "getpriority()" will
 308  * not return the normal nice-value, but a negated value that
 309  * has been offset by 20 (ie it returns 40..1 instead of -20..19)
 310  * to stay compatible.
 311  */
 312 asmlinkage long sys_getpriority(int which, int who)
 313 {
 314         struct task_struct *g, *p;
 315         struct user_struct *user;
 316         long niceval, retval = -ESRCH;
 317
 318         if (which > 2 || which < 0)
 319                 return -EINVAL;
 320
 321         read_lock(&tasklist_lock);
 322         switch (which) {
 323                 case PRIO_PROCESS:
 324                         if (!who)
 325                                 who = current->pid;
 326                         p = find_task_by_pid(who);
 327                         if (p) {
 328                                 niceval = 20 - task_nice(p);
 329                                 if (niceval > retval)
 330                                         retval = niceval;
 331                         }
 332                         break;
 333                 case PRIO_PGRP:
 334                         if (!who)
 335                                 who = process_group(current);
 336                         do_each_task_pid(who, PIDTYPE_PGID, p) {
 337                                 niceval = 20 - task_nice(p);
 338                                 if (niceval > retval)
 339                                         retval = niceval;
 340                         } while_each_task_pid(who, PIDTYPE_PGID, p);
 341                         break;
 342                 case PRIO_USER:
 343                         user = current->user;
 344                         if (!who)
 345                                 who = current->uid;
 346                         else
 347                                 if ((who != current->uid) && !(user = find_user(who)))
 348                                         goto out_unlock;        /* No processes for this user */
 349
 350                         do_each_thread(g, p)
 351                                 if (p->uid == who) {
 352                                         niceval = 20 - task_nice(p);
 353                                         if (niceval > retval)
 354                                                 retval = niceval;
 355                                 }
 356                         while_each_thread(g, p);
 357                         if (who != current->uid)
 358                                 free_uid(user);         /* for find_user() */
 359                         break;
 360         }
 361 out_unlock:
 362         read_unlock(&tasklist_lock);
 363
 364         return retval;
 365 }
 366
 367 /**
 368  *      emergency_restart - reboot the system
 369  *
 370  *      Without shutting down any hardware or taking any locks
 371  *      reboot the system.  This is called when we know we are in
 372  *      trouble so this is our best effort to reboot.  This is
 373  *      safe to call in interrupt context.
 374  */
 375 void emergency_restart(void)
 376 {
 377         machine_emergency_restart();
 378 }
 379 EXPORT_SYMBOL_GPL(emergency_restart);
 380
 381 void kernel_restart_prepare(char *cmd)
 382 {
 383         notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
 384         system_state = SYSTEM_RESTART;
 385         device_shutdown();
 386 }
 387
 388 /**
 389  *      kernel_restart - reboot the system
 390  *      @cmd: pointer to buffer containing command to execute for restart
 391  *              or %NULL
 392  *
 393  *      Shutdown everything and perform a clean reboot.
 394  *      This is not safe to call in interrupt context.
 395  */
 396 void kernel_restart(char *cmd)
 397 {
 398         kernel_restart_prepare(cmd);
 399         if (!cmd) {
 400                 printk(KERN_EMERG "Restarting system.\n");
 401         } else {
 402                 printk(KERN_EMERG "Restarting system with command '%s'.\n", cmd);
 403         }
 404         printk(".\n");
 405         machine_restart(cmd);
 406 }
 407 EXPORT_SYMBOL_GPL(kernel_restart);
 408
 409 /**
 410  *      kernel_kexec - reboot the system
 411  *
 412  *      Move into place and start executing a preloaded standalone
 413  *      executable.  If nothing was preloaded return an error.
 414  */
 415 void kernel_kexec(void)
 416 {
 417 #ifdef CONFIG_KEXEC
 418         struct kimage *image;
 419         image = xchg(&kexec_image, NULL);
 420         if (!image) {
 421                 return;
 422         }
 423         kernel_restart_prepare(NULL);
 424         printk(KERN_EMERG "Starting new kernel\n");
 425         machine_shutdown();
 426         machine_kexec(image);
 427 #endif
 428 }
 429 EXPORT_SYMBOL_GPL(kernel_kexec);
 430
 431 void kernel_shutdown_prepare(enum system_states state)
 432 {
 433         notifier_call_chain(&reboot_notifier_list,
 434                 (state == SYSTEM_HALT)?SYS_HALT:SYS_POWER_OFF, NULL);
 435         system_state = state;
 436         device_shutdown();
 437 }
 438 /**
 439  *      kernel_halt - halt the system
 440  *
 441  *      Shutdown everything and perform a clean system halt.
 442  */
 443 void kernel_halt(void)
 444 {
 445         kernel_shutdown_prepare(SYSTEM_HALT);
 446         printk(KERN_EMERG "System halted.\n");
 447         machine_halt();
 448 }
 449
 450 EXPORT_SYMBOL_GPL(kernel_halt);
 451
 452 /**
 453  *      kernel_power_off - power_off the system
 454  *
 455  *      Shutdown everything and perform a clean system power_off.
 456  */
 457 void kernel_power_off(void)
 458 {
 459         kernel_shutdown_prepare(SYSTEM_POWER_OFF);
 460         printk(KERN_EMERG "Power down.\n");
 461         machine_power_off();
 462 }
 463 EXPORT_SYMBOL_GPL(kernel_power_off);
 464 /*
 465  * Reboot system call: for obvious reasons only root may call it,
 466  * and even root needs to set up some magic numbers in the registers
 467  * so that some mistake won't make this reboot the whole machine.
 468  * You can also set the meaning of the ctrl-alt-del-key here.
 469  *
 470  * reboot doesn't sync: do that yourself before calling this.
 471  */
 472 asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user * arg)
 473 {
 474         char buffer[256];
 475
 476         /* We only trust the superuser with rebooting the system. */
 477         if (!capable(CAP_SYS_BOOT))
 478                 return -EPERM;
 479
 480         /* For safety, we require "magic" arguments. */
 481         if (magic1 != LINUX_REBOOT_MAGIC1 ||
 482             (magic2 != LINUX_REBOOT_MAGIC2 &&
 483                         magic2 != LINUX_REBOOT_MAGIC2A &&
 484                         magic2 != LINUX_REBOOT_MAGIC2B &&
 485                         magic2 != LINUX_REBOOT_MAGIC2C))
 486                 return -EINVAL;
 487
 488         /* Instead of trying to make the power_off code look like
 489          * halt when pm_power_off is not set do it the easy way.
 490          */
 491         if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
 492                 cmd = LINUX_REBOOT_CMD_HALT;
 493
 494         lock_kernel();
 495         switch (cmd) {
 496         case LINUX_REBOOT_CMD_RESTART:
 497                 kernel_restart(NULL);
 498                 break;
 499
 500         case LINUX_REBOOT_CMD_CAD_ON:
 501                 C_A_D = 1;
 502                 break;
 503
 504         case LINUX_REBOOT_CMD_CAD_OFF:
 505                 C_A_D = 0;
 506                 break;
 507
 508         case LINUX_REBOOT_CMD_HALT:
 509                 kernel_halt();
 510                 unlock_kernel();
 511                 do_exit(0);
 512                 break;
 513
 514         case LINUX_REBOOT_CMD_POWER_OFF:
 515                 kernel_power_off();
 516                 unlock_kernel();
 517                 do_exit(0);
 518                 break;
 519
 520         case LINUX_REBOOT_CMD_RESTART2:
 521                 if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0) {
 522                         unlock_kernel();
 523                         return -EFAULT;
 524                 }
 525                 buffer[sizeof(buffer) - 1] = '\0';
 526
 527                 kernel_restart(buffer);
 528                 break;
 529
 530         case LINUX_REBOOT_CMD_KEXEC:
 531                 kernel_kexec();
 532                 unlock_kernel();
 533                 return -EINVAL;
 534
 535 #ifdef CONFIG_SOFTWARE_SUSPEND
 536         case LINUX_REBOOT_CMD_SW_SUSPEND:
 537                 {
 538                         int ret = software_suspend();
 539                         unlock_kernel();
 540                         return ret;
 541                 }
 542 #endif
 543
 544         default:
 545                 unlock_kernel();
 546                 return -EINVAL;
 547         }
 548         unlock_kernel();
 549         return 0;
 550 }
 551
 552 static void deferred_cad(void *dummy)
 553 {
 554         kernel_restart(NULL);
 555 }
 556
 557 /*
 558  * This function gets called by ctrl-alt-del - ie the keyboard interrupt.
 559  * As it's called within an interrupt, it may NOT sync: the only choice
 560  * is whether to reboot at once, or just ignore the ctrl-alt-del.
 561  */
 562 void ctrl_alt_del(void)
 563 {
 564         static DECLARE_WORK(cad_work, deferred_cad, NULL);
 565
 566         if (C_A_D)
 567                 schedule_work(&cad_work);
 568         else
 569                 kill_proc(cad_pid, SIGINT, 1);
 570 }
 571
 572
 573 /*
 574  * Unprivileged users may change the real gid to the effective gid
 575  * or vice versa.  (BSD-style)
 576  *
 577  * If you set the real gid at all, or set the effective gid to a value not
 578  * equal to the real gid, then the saved gid is set to the new effective gid.
 579  *
 580  * This makes it possible for a setgid program to completely drop its
 581  * privileges, which is often a useful assertion to make when you are doing
 582  * a security audit over a program.
 583  *
 584  * The general idea is that a program which uses just setregid() will be
 585  * 100% compatible with BSD.  A program which uses just setgid() will be
 586  * 100% compatible with POSIX with saved IDs.
 587  *
 588  * SMP: There are not races, the GIDs are checked only by filesystem
 589  *      operations (as far as semantic preservation is concerned).
 590  */
 591 asmlinkage long sys_setregid(gid_t rgid, gid_t egid)
 592 {
 593         int old_rgid = current->gid;
 594         int old_egid = current->egid;
 595         int new_rgid = old_rgid;
 596         int new_egid = old_egid;
 597         int retval;
 598
 599         retval = security_task_setgid(rgid, egid, (gid_t)-1, LSM_SETID_RE);
 600         if (retval)
 601                 return retval;
 602
 603         if (rgid != (gid_t) -1) {
 604                 if ((old_rgid == rgid) ||
 605                     (current->egid==rgid) ||
 606                     capable(CAP_SETGID))
 607                         new_rgid = rgid;
 608                 else
 609                         return -EPERM;
 610         }
 611         if (egid != (gid_t) -1) {
 612                 if ((old_rgid == egid) ||
 613                     (current->egid == egid) ||
 614                     (current->sgid == egid) ||
 615                     capable(CAP_SETGID))
 616                         new_egid = egid;
 617                 else {
 618                         return -EPERM;
 619                 }
 620         }
 621         if (new_egid != old_egid)
 622         {
 623                 current->mm->dumpable = suid_dumpable;
 624                 smp_wmb();
 625         }
 626         if (rgid != (gid_t) -1 ||
 627             (egid != (gid_t) -1 && egid != old_rgid))
 628                 current->sgid = new_egid;
 629         current->fsgid = new_egid;
 630         current->egid = new_egid;
 631         current->gid = new_rgid;
 632         key_fsgid_changed(current);
 633         proc_id_connector(current, PROC_EVENT_GID);
 634         return 0;
 635 }
 636
 637 /*
 638  * setgid() is implemented like SysV w/ SAVED_IDS
 639  *
 640  * SMP: Same implicit races as above.
 641  */
 642 asmlinkage long sys_setgid(gid_t gid)
 643 {
 644         int old_egid = current->egid;
 645         int retval;
 646
 647         retval = security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_ID);
 648         if (retval)
 649                 return retval;
 650
 651         if (capable(CAP_SETGID))
 652         {
 653                 if(old_egid != gid)
 654                 {
 655                         current->mm->dumpable = suid_dumpable;
 656                         smp_wmb();
 657                 }
 658                 current->gid = current->egid = current->sgid = current->fsgid = gid;
 659         }
 660         else if ((gid == current->gid) || (gid == current->sgid))
 661         {
 662                 if(old_egid != gid)
 663                 {
 664                         current->mm->dumpable = suid_dumpable;
 665                         smp_wmb();
 666                 }
 667                 current->egid = current->fsgid = gid;
 668         }
 669         else
 670                 return -EPERM;
 671
 672         key_fsgid_changed(current);
 673         proc_id_connector(current, PROC_EVENT_GID);
 674         return 0;
 675 }
 676
 677 static int set_user(uid_t new_ruid, int dumpclear)
 678 {
 679         struct user_struct *new_user;
 680
 681         new_user = alloc_uid(new_ruid);
 682         if (!new_user)
 683                 return -EAGAIN;
 684
 685         if (atomic_read(&new_user->processes) >=
 686                                 current->signal->rlim[RLIMIT_NPROC].rlim_cur &&
 687                         new_user != &root_user) {
 688                 free_uid(new_user);
 689                 return -EAGAIN;
 690         }
 691
 692         switch_uid(new_user);
 693
 694         if(dumpclear)
 695         {
 696                 current->mm->dumpable = suid_dumpable;
 697                 smp_wmb();
 698         }
 699         current->uid = new_ruid;
 700         return 0;
 701 }
 702
 703 /*
 704  * Unprivileged users may change the real uid to the effective uid
 705  * or vice versa.  (BSD-style)
 706  *
 707  * If you set the real uid at all, or set the effective uid to a value not
 708  * equal to the real uid, then the saved uid is set to the new effective uid.
 709  *
 710  * This makes it possible for a setuid program to completely drop its
 711  * privileges, which is often a useful assertion to make when you are doing
 712  * a security audit over a program.
 713  *
 714  * The general idea is that a program which uses just setreuid() will be
 715  * 100% compatible with BSD.  A program which uses just setuid() will be
 716  * 100% compatible with POSIX with saved IDs.
 717  */
 718 asmlinkage long sys_setreuid(uid_t ruid, uid_t euid)
 719 {
 720         int old_ruid, old_euid, old_suid, new_ruid, new_euid;
 721         int retval;
 722
 723         retval = security_task_setuid(ruid, euid, (uid_t)-1, LSM_SETID_RE);
 724         if (retval)
 725                 return retval;
 726
 727         new_ruid = old_ruid = current->uid;
 728         new_euid = old_euid = current->euid;
 729         old_suid = current->suid;
 730
 731         if (ruid != (uid_t) -1) {
 732                 new_ruid = ruid;
 733                 if ((old_ruid != ruid) &&
 734                     (current->euid != ruid) &&
 735                     !capable(CAP_SETUID))
 736                         return -EPERM;
 737         }
 738
 739         if (euid != (uid_t) -1) {
 740                 new_euid = euid;
 741                 if ((old_ruid != euid) &&
 742                     (current->euid != euid) &&
 743                     (current->suid != euid) &&
 744                     !capable(CAP_SETUID))
 745                         return -EPERM;
 746         }
 747
 748         if (new_ruid != old_ruid && set_user(new_ruid, new_euid != old_euid) < 0)
 749                 return -EAGAIN;
 750
 751         if (new_euid != old_euid)
 752         {
 753                 current->mm->dumpable = suid_dumpable;
 754                 smp_wmb();
 755         }
 756         current->fsuid = current->euid = new_euid;
 757         if (ruid != (uid_t) -1 ||
 758             (euid != (uid_t) -1 && euid != old_ruid))
 759                 current->suid = current->euid;
 760         current->fsuid = current->euid;
 761
 762         key_fsuid_changed(current);
 763         proc_id_connector(current, PROC_EVENT_UID);
 764
 765         return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_RE);
 766 }
 767
 768
 769
 770 /*
 771  * setuid() is implemented like SysV with SAVED_IDS
 772  *
 773  * Note that SAVED_ID's is deficient in that a setuid root program
 774  * like sendmail, for example, cannot set its uid to be a normal
 775  * user and then switch back, because if you're root, setuid() sets
 776  * the saved uid too.  If you don't like this, blame the bright people
 777  * in the POSIX committee and/or USG.  Note that the BSD-style setreuid()
 778  * will allow a root program to temporarily drop privileges and be able to
 779  * regain them by swapping the real and effective uid.
 780  */
 781 asmlinkage long sys_setuid(uid_t uid)
 782 {
 783         int old_euid = current->euid;
 784         int old_ruid, old_suid, new_ruid, new_suid;
 785         int retval;
 786
 787         retval = security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_ID);
 788         if (retval)
 789                 return retval;
 790
 791         old_ruid = new_ruid = current->uid;
 792         old_suid = current->suid;
 793         new_suid = old_suid;
 794
 795         if (capable(CAP_SETUID)) {
 796                 if (uid != old_ruid && set_user(uid, old_euid != uid) < 0)
 797                         return -EAGAIN;
 798                 new_suid = uid;
 799         } else if ((uid != current->uid) && (uid != new_suid))
 800                 return -EPERM;
 801
 802         if (old_euid != uid)
 803         {
 804                 current->mm->dumpable = suid_dumpable;
 805                 smp_wmb();
 806         }
 807         current->fsuid = current->euid = uid;
 808         current->suid = new_suid;
 809
 810         key_fsuid_changed(current);
 811         proc_id_connector(current, PROC_EVENT_UID);
 812
 813         return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_ID);
 814 }
 815
 816
 817 /*
 818  * This function implements a generic ability to update ruid, euid,
 819  * and suid.  This allows you to implement the 4.4 compatible seteuid().
 820  */
 821 asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid)
 822 {
 823         int old_ruid = current->uid;
 824         int old_euid = current->euid;
 825         int old_suid = current->suid;
 826         int retval;
 827
 828         retval = security_task_setuid(ruid, euid, suid, LSM_SETID_RES);
 829         if (retval)
 830                 return retval;
 831
 832         if (!capable(CAP_SETUID)) {
 833                 if ((ruid != (uid_t) -1) && (ruid != current->uid) &&
 834                     (ruid != current->euid) && (ruid != current->suid))
 835                         return -EPERM;
 836                 if ((euid != (uid_t) -1) && (euid != current->uid) &&
 837                     (euid != current->euid) && (euid != current->suid))
 838                         return -EPERM;
 839                 if ((suid != (uid_t) -1) && (suid != current->uid) &&
 840                     (suid != current->euid) && (suid != current->suid))
 841                         return -EPERM;
 842         }
 843         if (ruid != (uid_t) -1) {
 844                 if (ruid != current->uid && set_user(ruid, euid != current->euid) < 0)
 845                         return -EAGAIN;
 846         }
 847         if (euid != (uid_t) -1) {
 848                 if (euid != current->euid)
 849                 {
 850                         current->mm->dumpable = suid_dumpable;
 851                         smp_wmb();
 852                 }
 853                 current->euid = euid;
 854         }
 855         current->fsuid = current->euid;
 856         if (suid != (uid_t) -1)
 857                 current->suid = suid;
 858
 859         key_fsuid_changed(current);
 860         proc_id_connector(current, PROC_EVENT_UID);
 861
 862         return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_RES);
 863 }
 864
 865 asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid)
 866 {
 867         int retval;
 868
 869         if (!(retval = put_user(current->uid, ruid)) &&
 870             !(retval = put_user(current->euid, euid)))
 871                 retval = put_user(current->suid, suid);
 872
 873         return retval;
 874 }
 875
 876 /*
 877  * Same as above, but for rgid, egid, sgid.
 878  */
 879 asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid)
 880 {
 881         int retval;
 882
 883         retval = security_task_setgid(rgid, egid, sgid, LSM_SETID_RES);
 884         if (retval)
 885                 return retval;
 886
 887         if (!capable(CAP_SETGID)) {
 888                 if ((rgid != (gid_t) -1) && (rgid != current->gid) &&
 889                     (rgid != current->egid) && (rgid != current->sgid))
 890                         return -EPERM;
 891                 if ((egid != (gid_t) -1) && (egid != current->gid) &&
 892                     (egid != current->egid) && (egid != current->sgid))
 893                         return -EPERM;
 894                 if ((sgid != (gid_t) -1) && (sgid != current->gid) &&
 895                     (sgid != current->egid) && (sgid != current->sgid))
 896                         return -EPERM;
 897         }
 898         if (egid != (gid_t) -1) {
 899                 if (egid != current->egid)
 900                 {
 901                         current->mm->dumpable = suid_dumpable;
 902                         smp_wmb();
 903                 }
 904                 current->egid = egid;
 905         }
 906         current->fsgid = current->egid;
 907         if (rgid != (gid_t) -1)
 908                 current->gid = rgid;
 909         if (sgid != (gid_t) -1)
 910                 current->sgid = sgid;
 911
 912         key_fsgid_changed(current);
 913         proc_id_connector(current, PROC_EVENT_GID);
 914         return 0;
 915 }
 916
 917 asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid)
 918 {
 919         int retval;
 920
 921         if (!(retval = put_user(current->gid, rgid)) &&
 922             !(retval = put_user(current->egid, egid)))
 923                 retval = put_user(current->sgid, sgid);
 924
 925         return retval;
 926 }
 927
 928
 929 /*
 930  * "setfsuid()" sets the fsuid - the uid used for filesystem checks. This
 931  * is used for "access()" and for the NFS daemon (letting nfsd stay at
 932  * whatever uid it wants to). It normally shadows "euid", except when
 933  * explicitly set by setfsuid() or for access..
 934  */
 935 asmlinkage long sys_setfsuid(uid_t uid)
 936 {
 937         int old_fsuid;
 938
 939         old_fsuid = current->fsuid;
 940         if (security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS))
 941                 return old_fsuid;
 942
 943         if (uid == current->uid || uid == current->euid ||
 944             uid == current->suid || uid == current->fsuid ||
 945             capable(CAP_SETUID))
 946         {
 947                 if (uid != old_fsuid)
 948                 {
 949                         current->mm->dumpable = suid_dumpable;
 950                         smp_wmb();
 951                 }
 952                 current->fsuid = uid;
 953         }
 954
 955         key_fsuid_changed(current);
 956         proc_id_connector(current, PROC_EVENT_UID);
 957
 958         security_task_post_setuid(old_fsuid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS);
 959
 960         return old_fsuid;
 961 }
 962
 963 /*
 964  * Samma på svenska..
 965  */
 966 asmlinkage long sys_setfsgid(gid_t gid)
 967 {
 968         int old_fsgid;
 969
 970         old_fsgid = current->fsgid;
 971         if (security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_FS))
 972                 return old_fsgid;
 973
 974         if (gid == current->gid || gid == current->egid ||
 975             gid == current->sgid || gid == current->fsgid ||
 976             capable(CAP_SETGID))
 977         {
 978                 if (gid != old_fsgid)
 979                 {
 980                         current->mm->dumpable = suid_dumpable;
 981                         smp_wmb();
 982                 }
 983                 current->fsgid = gid;
 984                 key_fsgid_changed(current);
 985                 proc_id_connector(current, PROC_EVENT_GID);
 986         }
 987         return old_fsgid;
 988 }
 989
 990 asmlinkage long sys_times(struct tms __user * tbuf)
 991 {
 992         /*
 993          *      In the SMP world we might just be unlucky and have one of
 994          *      the times increment as we use it. Since the value is an
 995          *      atomically safe type this is just fine. Conceptually its
 996          *      as if the syscall took an instant longer to occur.
 997          */
 998         if (tbuf) {
 999                 struct tms tmp;
1000                 cputime_t utime, stime, cutime, cstime;
1001
1002 #ifdef CONFIG_SMP
1003                 if (thread_group_empty(current)) {
1004                         /*
1005                          * Single thread case without the use of any locks.
1006                          *
1007                          * We may race with release_task if two threads are
1008                          * executing. However, release task first adds up the
1009                          * counters (__exit_signal) before  removing the task
1010                          * from the process tasklist (__unhash_process).
1011                          * __exit_signal also acquires and releases the
1012                          * siglock which results in the proper memory ordering
1013                          * so that the list modifications are always visible
1014                          * after the counters have been updated.
1015                          *
1016                          * If the counters have been updated by the second thread
1017                          * but the thread has not yet been removed from the list
1018                          * then the other branch will be executing which will
1019                          * block on tasklist_lock until the exit handling of the
1020                          * other task is finished.
1021                          *
1022                          * This also implies that the sighand->siglock cannot
1023                          * be held by another processor. So we can also
1024                          * skip acquiring that lock.
1025                          */
1026                         utime = cputime_add(current->signal->utime, current->utime);
1027                         stime = cputime_add(current->signal->utime, current->stime);
1028                         cutime = current->signal->cutime;
1029                         cstime = current->signal->cstime;
1030                 } else
1031 #endif
1032                 {
1033
1034                         /* Process with multiple threads */
1035                         struct task_struct *tsk = current;
1036                         struct task_struct *t;
1037
1038                         read_lock(&tasklist_lock);
1039                         utime = tsk->signal->utime;
1040                         stime = tsk->signal->stime;
1041                         t = tsk;
1042                         do {
1043                                 utime = cputime_add(utime, t->utime);
1044                                 stime = cputime_add(stime, t->stime);
1045                                 t = next_thread(t);
1046                         } while (t != tsk);
1047
1048                         /*
1049                          * While we have tasklist_lock read-locked, no dying thread
1050                          * can be updating current->signal->[us]time.  Instead,
1051                          * we got their counts included in the live thread loop.
1052                          * However, another thread can come in right now and
1053                          * do a wait call that updates current->signal->c[us]time.
1054                          * To make sure we always see that pair updated atomically,
1055                          * we take the siglock around fetching them.
1056                          */
1057                         spin_lock_irq(&tsk->sighand->siglock);
1058                         cutime = tsk->signal->cutime;
1059                         cstime = tsk->signal->cstime;
1060                         spin_unlock_irq(&tsk->sighand->siglock);
1061                         read_unlock(&tasklist_lock);
1062                 }
1063                 tmp.tms_utime = cputime_to_clock_t(utime);
1064                 tmp.tms_stime = cputime_to_clock_t(stime);
1065                 tmp.tms_cutime = cputime_to_clock_t(cutime);
1066                 tmp.tms_cstime = cputime_to_clock_t(cstime);
1067                 if (copy_to_user(tbuf, &tmp, sizeof(struct tms)))
1068                         return -EFAULT;
1069         }
1070         return (long) jiffies_64_to_clock_t(get_jiffies_64());
1071 }
1072
1073 /*
1074  * This needs some heavy checking ...
1075  * I just haven't the stomach for it. I also don't fully
1076  * understand sessions/pgrp etc. Let somebody who does explain it.
1077  *
1078  * OK, I think I have the protection semantics right.... this is really
1079  * only important on a multi-user system anyway, to make sure one user
1080  * can't send a signal to a process owned by another.  -TYT, 12/12/91
1081  *
1082  * Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
1083  * LBT 04.03.94
1084  */
1085
1086 asmlinkage long sys_setpgid(pid_t pid, pid_t pgid)
1087 {
1088         struct task_struct *p;
1089         struct task_struct *group_leader = current->group_leader;
1090         int err = -EINVAL;
1091
1092         if (!pid)
1093                 pid = group_leader->pid;
1094         if (!pgid)
1095                 pgid = pid;
1096         if (pgid < 0)
1097                 return -EINVAL;
1098
1099         /* From this point forward we keep holding onto the tasklist lock
1100          * so that our parent does not change from under us. -DaveM
1101          */
1102         write_lock_irq(&tasklist_lock);
1103
1104         err = -ESRCH;
1105         p = find_task_by_pid(pid);
1106         if (!p)
1107                 goto out;
1108
1109         err = -EINVAL;
1110         if (!thread_group_leader(p))
1111                 goto out;
1112
1113         if (p->real_parent == group_leader) {
1114                 err = -EPERM;
1115                 if (p->signal->session != group_leader->signal->session)
1116                         goto out;
1117                 err = -EACCES;
1118                 if (p->did_exec)
1119                         goto out;
1120         } else {
1121                 err = -ESRCH;
1122                 if (p != group_leader)
1123                         goto out;
1124         }
1125
1126         err = -EPERM;
1127         if (p->signal->leader)
1128                 goto out;
1129
1130         if (pgid != pid) {
1131                 struct task_struct *p;
1132
1133                 do_each_task_pid(pgid, PIDTYPE_PGID, p) {
1134                         if (p->signal->session == group_leader->signal->session)
1135                                 goto ok_pgid;
1136                 } while_each_task_pid(pgid, PIDTYPE_PGID, p);
1137                 goto out;
1138         }
1139
1140 ok_pgid:
1141         err = security_task_setpgid(p, pgid);
1142         if (err)
1143                 goto out;
1144
1145         if (process_group(p) != pgid) {
1146                 detach_pid(p, PIDTYPE_PGID);
1147                 p->signal->pgrp = pgid;
1148                 attach_pid(p, PIDTYPE_PGID, pgid);
1149         }
1150
1151         err = 0;
1152 out:
1153         /* All paths lead to here, thus we are safe. -DaveM */
1154         write_unlock_irq(&tasklist_lock);
1155         return err;
1156 }
1157
1158 asmlinkage long sys_getpgid(pid_t pid)
1159 {
1160         if (!pid) {
1161                 return process_group(current);
1162         } else {
1163                 int retval;
1164                 struct task_struct *p;
1165
1166                 read_lock(&tasklist_lock);
1167                 p = find_task_by_pid(pid);
1168
1169                 retval = -ESRCH;
1170                 if (p) {
1171                         retval = security_task_getpgid(p);
1172                         if (!retval)
1173                                 retval = process_group(p);
1174                 }
1175                 read_unlock(&tasklist_lock);
1176                 return retval;
1177         }
1178 }
1179
1180 #ifdef __ARCH_WANT_SYS_GETPGRP
1181
1182 asmlinkage long sys_getpgrp(void)
1183 {
1184         /* SMP - assuming writes are word atomic this is fine */
1185         return process_group(current);
1186 }
1187
1188 #endif
1189
1190 asmlinkage long sys_getsid(pid_t pid)
1191 {
1192         if (!pid) {
1193                 return current->signal->session;
1194         } else {
1195                 int retval;
1196                 struct task_struct *p;
1197
1198                 read_lock(&tasklist_lock);
1199                 p = find_task_by_pid(pid);
1200
1201                 retval = -ESRCH;
1202                 if(p) {
1203                         retval = security_task_getsid(p);
1204                         if (!retval)
1205                                 retval = p->signal->session;
1206                 }
1207                 read_unlock(&tasklist_lock);
1208                 return retval;
1209         }
1210 }
1211
1212 asmlinkage long sys_setsid(void)
1213 {
1214         struct task_struct *group_leader = current->group_leader;
1215         struct pid *pid;
1216         int err = -EPERM;
1217
1218         mutex_lock(&tty_mutex);
1219         write_lock_irq(&tasklist_lock);
1220
1221         pid = find_pid(PIDTYPE_PGID, group_leader->pid);
1222         if (pid)
1223                 goto out;
1224
1225         group_leader->signal->leader = 1;
1226         __set_special_pids(group_leader->pid, group_leader->pid);
1227         group_leader->signal->tty = NULL;
1228         group_leader->signal->tty_old_pgrp = 0;
1229         err = process_group(group_leader);
1230 out:
1231         write_unlock_irq(&tasklist_lock);
1232         mutex_unlock(&tty_mutex);
1233         return err;
1234 }
1235
1236 /*
1237  * Supplementary group IDs
1238  */
1239
1240 /* init to 2 - one for init_task, one to ensure it is never freed */
1241 struct group_info init_groups = { .usage = ATOMIC_INIT(2) };
1242
1243 struct group_info *groups_alloc(int gidsetsize)
1244 {
1245         struct group_info *group_info;
1246         int nblocks;
1247         int i;
1248
1249         nblocks = (gidsetsize + NGROUPS_PER_BLOCK - 1) / NGROUPS_PER_BLOCK;
1250         /* Make sure we always allocate at least one indirect block pointer */
1251         nblocks = nblocks ? : 1;
1252         group_info = kmalloc(sizeof(*group_info) + nblocks*sizeof(gid_t *), GFP_USER);
1253         if (!group_info)
1254                 return NULL;
1255         group_info->ngroups = gidsetsize;
1256         group_info->nblocks = nblocks;
1257         atomic_set(&group_info->usage, 1);
1258
1259         if (gidsetsize <= NGROUPS_SMALL) {
1260                 group_info->blocks[0] = group_info->small_block;
1261         } else {
1262                 for (i = 0; i < nblocks; i++) {
1263                         gid_t *b;
1264                         b = (void *)__get_free_page(GFP_USER);
1265                         if (!b)
1266                                 goto out_undo_partial_alloc;
1267                         group_info->blocks[i] = b;
1268                 }
1269         }
1270         return group_info;
1271
1272 out_undo_partial_alloc:
1273         while (--i >= 0) {
1274                 free_page((unsigned long)group_info->blocks[i]);
1275         }
1276         kfree(group_info);
1277         return NULL;
1278 }
1279
1280 EXPORT_SYMBOL(groups_alloc);
1281
1282 void groups_free(struct group_info *group_info)
1283 {
1284         if (group_info->blocks[0] != group_info->small_block) {
1285                 int i;
1286                 for (i = 0; i < group_info->nblocks; i++)
1287                         free_page((unsigned long)group_info->blocks[i]);
1288         }
1289         kfree(group_info);
1290 }
1291
1292 EXPORT_SYMBOL(groups_free);
1293
1294 /* export the group_info to a user-space array */
1295 static int groups_to_user(gid_t __user *grouplist,
1296     struct group_info *group_info)
1297 {
1298         int i;
1299         int count = group_info->ngroups;
1300
1301         for (i = 0; i < group_info->nblocks; i++) {
1302                 int cp_count = min(NGROUPS_PER_BLOCK, count);
1303                 int off = i * NGROUPS_PER_BLOCK;
1304                 int len = cp_count * sizeof(*grouplist);
1305
1306                 if (copy_to_user(grouplist+off, group_info->blocks[i], len))
1307                         return -EFAULT;
1308
1309                 count -= cp_count;
1310         }
1311         return 0;
1312 }
1313
1314 /* fill a group_info from a user-space array - it must be allocated already */
1315 static int groups_from_user(struct group_info *group_info,
1316     gid_t __user *grouplist)
1317  {
1318         int i;
1319         int count = group_info->ngroups;
1320
1321         for (i = 0; i < group_info->nblocks; i++) {
1322                 int cp_count = min(NGROUPS_PER_BLOCK, count);
1323                 int off = i * NGROUPS_PER_BLOCK;
1324                 int len = cp_count * sizeof(*grouplist);
1325
1326                 if (copy_from_user(group_info->blocks[i], grouplist+off, len))
1327                         return -EFAULT;
1328
1329                 count -= cp_count;
1330         }
1331         return 0;
1332 }
1333
1334 /* a simple Shell sort */
1335 static void groups_sort(struct group_info *group_info)
1336 {
1337         int base, max, stride;
1338         int gidsetsize = group_info->ngroups;
1339
1340         for (stride = 1; stride < gidsetsize; stride = 3 * stride + 1)
1341                 ; /* nothing */
1342         stride /= 3;
1343
1344         while (stride) {
1345                 max = gidsetsize - stride;
1346                 for (base = 0; base < max; base++) {
1347                         int left = base;
1348                         int right = left + stride;
1349                         gid_t tmp = GROUP_AT(group_info, right);
1350
1351                         while (left >= 0 && GROUP_AT(group_info, left) > tmp) {
1352                                 GROUP_AT(group_info, right) =
1353                                     GROUP_AT(group_info, left);
1354                                 right = left;
1355                                 left -= stride;
1356                         }
1357                         GROUP_AT(group_info, right) = tmp;
1358                 }
1359                 stride /= 3;
1360         }
1361 }
1362
1363 /* a simple bsearch */
1364 int groups_search(struct group_info *group_info, gid_t grp)
1365 {
1366         unsigned int left, right;
1367
1368         if (!group_info)
1369                 return 0;
1370
1371         left = 0;
1372         right = group_info->ngroups;
1373         while (left < right) {
1374                 unsigned int mid = (left+right)/2;
1375                 int cmp = grp - GROUP_AT(group_info, mid);
1376                 if (cmp > 0)
1377                         left = mid + 1;
1378                 else if (cmp < 0)
1379                         right = mid;
1380                 else
1381                         return 1;
1382         }
1383         return 0;
1384 }
1385
1386 /* validate and set current->group_info */
1387 int set_current_groups(struct group_info *group_info)
1388 {
1389         int retval;
1390         struct group_info *old_info;
1391
1392         retval = security_task_setgroups(group_info);
1393         if (retval)
1394                 return retval;
1395
1396         groups_sort(group_info);
1397         get_group_info(group_info);
1398
1399         task_lock(current);
1400         old_info = current->group_info;
1401         current->group_info = group_info;
1402         task_unlock(current);
1403
1404         put_group_info(old_info);
1405
1406         return 0;
1407 }
1408
1409 EXPORT_SYMBOL(set_current_groups);
1410
1411 asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist)
1412 {
1413         int i = 0;
1414
1415         /*
1416          *      SMP: Nobody else can change our grouplist. Thus we are
1417          *      safe.
1418          */
1419
1420         if (gidsetsize < 0)
1421                 return -EINVAL;
1422
1423         /* no need to grab task_lock here; it cannot change */
1424         i = current->group_info->ngroups;
1425         if (gidsetsize) {
1426                 if (i > gidsetsize) {
1427                         i = -EINVAL;
1428                         goto out;
1429                 }
1430                 if (groups_to_user(grouplist, current->group_info)) {
1431                         i = -EFAULT;
1432                         goto out;
1433                 }
1434         }
1435 out:
1436         return i;
1437 }
1438
1439 /*
1440  *      SMP: Our groups are copy-on-write. We can set them safely
1441  *      without another task interfering.
1442  */
1443
1444 asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist)
1445 {
1446         struct group_info *group_info;
1447         int retval;
1448
1449         if (!capable(CAP_SETGID))
1450                 return -EPERM;
1451         if ((unsigned)gidsetsize > NGROUPS_MAX)
1452                 return -EINVAL;
1453
1454         group_info = groups_alloc(gidsetsize);
1455         if (!group_info)
1456                 return -ENOMEM;
1457         retval = groups_from_user(group_info, grouplist);
1458         if (retval) {
1459                 put_group_info(group_info);
1460                 return retval;
1461         }
1462
1463         retval = set_current_groups(group_info);
1464         put_group_info(group_info);
1465
1466         return retval;
1467 }
1468
1469 /*
1470  * Check whether we're fsgid/egid or in the supplemental group..
1471  */
1472 int in_group_p(gid_t grp)
1473 {
1474         int retval = 1;
1475         if (grp != current->fsgid) {
1476                 retval = groups_search(current->group_info, grp);
1477         }
1478         return retval;
1479 }
1480
1481 EXPORT_SYMBOL(in_group_p);
1482
1483 int in_egroup_p(gid_t grp)
1484 {
1485         int retval = 1;
1486         if (grp != current->egid) {
1487                 retval = groups_search(current->group_info, grp);
1488         }
1489         return retval;
1490 }
1491
1492 EXPORT_SYMBOL(in_egroup_p);
1493
1494 DECLARE_RWSEM(uts_sem);
1495
1496 EXPORT_SYMBOL(uts_sem);
1497
1498 asmlinkage long sys_newuname(struct new_utsname __user * name)
1499 {
1500         int errno = 0;
1501
1502         down_read(&uts_sem);
1503         if (copy_to_user(name,&system_utsname,sizeof *name))
1504                 errno = -EFAULT;
1505         up_read(&uts_sem);
1506         return errno;
1507 }
1508
1509 asmlinkage long sys_sethostname(char __user *name, int len)
1510 {
1511         int errno;
1512         char tmp[__NEW_UTS_LEN];
1513
1514         if (!capable(CAP_SYS_ADMIN))
1515                 return -EPERM;
1516         if (len < 0 || len > __NEW_UTS_LEN)
1517                 return -EINVAL;
1518         down_write(&uts_sem);
1519         errno = -EFAULT;
1520         if (!copy_from_user(tmp, name, len)) {
1521                 memcpy(system_utsname.nodename, tmp, len);
1522                 system_utsname.nodename[len] = 0;
1523                 errno = 0;
1524         }
1525         up_write(&uts_sem);
1526         return errno;
1527 }
1528
1529 #ifdef __ARCH_WANT_SYS_GETHOSTNAME
1530
1531 asmlinkage long sys_gethostname(char __user *name, int len)
1532 {
1533         int i, errno;
1534
1535         if (len < 0)
1536                 return -EINVAL;
1537         down_read(&uts_sem);
1538         i = 1 + strlen(system_utsname.nodename);
1539         if (i > len)
1540                 i = len;
1541         errno = 0;
1542         if (copy_to_user(name, system_utsname.nodename, i))
1543                 errno = -EFAULT;
1544         up_read(&uts_sem);
1545         return errno;
1546 }
1547
1548 #endif
1549
1550 /*
1551  * Only setdomainname; getdomainname can be implemented by calling
1552  * uname()
1553  */
1554 asmlinkage long sys_setdomainname(char __user *name, int len)
1555 {
1556         int errno;
1557         char tmp[__NEW_UTS_LEN];
1558
1559         if (!capable(CAP_SYS_ADMIN))
1560                 return -EPERM;
1561         if (len < 0 || len > __NEW_UTS_LEN)
1562                 return -EINVAL;
1563
1564         down_write(&uts_sem);
1565         errno = -EFAULT;
1566         if (!copy_from_user(tmp, name, len)) {
1567                 memcpy(system_utsname.domainname, tmp, len);
1568                 system_utsname.domainname[len] = 0;
1569                 errno = 0;
1570         }
1571         up_write(&uts_sem);
1572         return errno;
1573 }
1574
1575 asmlinkage long sys_getrlimit(unsigned int resource, struct rlimit __user *rlim)
1576 {
1577         if (resource >= RLIM_NLIMITS)
1578                 return -EINVAL;
1579         else {
1580                 struct rlimit value;
1581                 task_lock(current->group_leader);
1582                 value = current->signal->rlim[resource];
1583                 task_unlock(current->group_leader);
1584                 return copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
1585         }
1586 }
1587
1588 #ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT
1589
1590 /*
1591  *      Back compatibility for getrlimit. Needed for some apps.
1592  */
1593
1594 asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim)
1595 {
1596         struct rlimit x;
1597         if (resource >= RLIM_NLIMITS)
1598                 return -EINVAL;
1599
1600         task_lock(current->group_leader);
1601         x = current->signal->rlim[resource];
1602         task_unlock(current->group_leader);
1603         if(x.rlim_cur > 0x7FFFFFFF)
1604                 x.rlim_cur = 0x7FFFFFFF;
1605         if(x.rlim_max > 0x7FFFFFFF)
1606                 x.rlim_max = 0x7FFFFFFF;
1607         return copy_to_user(rlim, &x, sizeof(x))?-EFAULT:0;
1608 }
1609
1610 #endif
1611
1612 asmlinkage long sys_setrlimit(unsigned int resource, struct rlimit __user *rlim)
1613 {
1614         struct rlimit new_rlim, *old_rlim;
1615         unsigned long it_prof_secs;
1616         int retval;
1617
1618         if (resource >= RLIM_NLIMITS)
1619                 return -EINVAL;
1620         if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
1621                 return -EFAULT;
1622         if (new_rlim.rlim_cur > new_rlim.rlim_max)
1623                 return -EINVAL;
1624         old_rlim = current->signal->rlim + resource;
1625         if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
1626             !capable(CAP_SYS_RESOURCE))
1627                 return -EPERM;
1628         if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > NR_OPEN)
1629                 return -EPERM;
1630
1631         retval = security_task_setrlimit(resource, &new_rlim);
1632         if (retval)
1633                 return retval;
1634
1635         task_lock(current->group_leader);
1636         *old_rlim = new_rlim;
1637         task_unlock(current->group_leader);
1638
1639         if (resource != RLIMIT_CPU)
1640                 goto out;
1641
1642         /*
1643          * RLIMIT_CPU handling.   Note that the kernel fails to return an error
1644          * code if it rejected the user's attempt to set RLIMIT_CPU.  This is a
1645          * very long-standing error, and fixing it now risks breakage of
1646          * applications, so we live with it
1647          */
1648         if (new_rlim.rlim_cur == RLIM_INFINITY)
1649                 goto out;
1650
1651         it_prof_secs = cputime_to_secs(current->signal->it_prof_expires);
1652         if (it_prof_secs == 0 || new_rlim.rlim_cur <= it_prof_secs) {
1653                 unsigned long rlim_cur = new_rlim.rlim_cur;
1654                 cputime_t cputime;
1655
1656                 if (rlim_cur == 0) {
1657                         /*
1658                          * The caller is asking for an immediate RLIMIT_CPU
1659                          * expiry.  But we use the zero value to mean "it was
1660                          * never set".  So let's cheat and make it one second
1661                          * instead
1662                          */
1663                         rlim_cur = 1;
1664                 }
1665                 cputime = secs_to_cputime(rlim_cur);
1666                 read_lock(&tasklist_lock);
1667                 spin_lock_irq(&current->sighand->siglock);
1668                 set_process_cpu_timer(current, CPUCLOCK_PROF, &cputime, NULL);
1669                 spin_unlock_irq(&current->sighand->siglock);
1670                 read_unlock(&tasklist_lock);
1671         }
1672 out:
1673         return 0;
1674 }
1675
1676 /*
1677  * It would make sense to put struct rusage in the task_struct,
1678  * except that would make the task_struct be *really big*.  After
1679  * task_struct gets moved into malloc'ed memory, it would
1680  * make sense to do this.  It will make moving the rest of the information
1681  * a lot simpler!  (Which we're not doing right now because we're not
1682  * measuring them yet).
1683  *
1684  * When sampling multiple threads for RUSAGE_SELF, under SMP we might have
1685  * races with threads incrementing their own counters.  But since word
1686  * reads are atomic, we either get new values or old values and we don't
1687  * care which for the sums.  We always take the siglock to protect reading
1688  * the c* fields from p->signal from races with exit.c updating those
1689  * fields when reaping, so a sample either gets all the additions of a
1690  * given child after it's reaped, or none so this sample is before reaping.
1691  *
1692  * tasklist_lock locking optimisation:
1693  * If we are current and single threaded, we do not need to take the tasklist
1694  * lock or the siglock.  No one else can take our signal_struct away,
1695  * no one else can reap the children to update signal->c* counters, and
1696  * no one else can race with the signal-> fields.
1697  * If we do not take the tasklist_lock, the signal-> fields could be read
1698  * out of order while another thread was just exiting. So we place a
1699  * read memory barrier when we avoid the lock.  On the writer side,
1700  * write memory barrier is implied in  __exit_signal as __exit_signal releases
1701  * the siglock spinlock after updating the signal-> fields.
1702  *
1703  * We don't really need the siglock when we access the non c* fields
1704  * of the signal_struct (for RUSAGE_SELF) even in multithreaded
1705  * case, since we take the tasklist lock for read and the non c* signal->
1706  * fields are updated only in __exit_signal, which is called with
1707  * tasklist_lock taken for write, hence these two threads cannot execute
1708  * concurrently.
1709  *
1710  */
1711
1712 static void k_getrusage(struct task_struct *p, int who, struct rusage *r)
1713 {
1714         struct task_struct *t;
1715         unsigned long flags;
1716         cputime_t utime, stime;
1717         int need_lock = 0;
1718
1719         memset((char *) r, 0, sizeof *r);
1720         utime = stime = cputime_zero;
1721
1722         if (p != current || !thread_group_empty(p))
1723                 need_lock = 1;
1724
1725         if (need_lock) {
1726                 read_lock(&tasklist_lock);
1727                 if (unlikely(!p->signal)) {
1728                         read_unlock(&tasklist_lock);
1729                         return;
1730                 }
1731         } else
1732                 /* See locking comments above */
1733                 smp_rmb();
1734
1735         switch (who) {
1736                 case RUSAGE_BOTH:
1737                 case RUSAGE_CHILDREN:
1738                         spin_lock_irqsave(&p->sighand->siglock, flags);
1739                         utime = p->signal->cutime;
1740                         stime = p->signal->cstime;
1741                         r->ru_nvcsw = p->signal->cnvcsw;
1742                         r->ru_nivcsw = p->signal->cnivcsw;
1743                         r->ru_minflt = p->signal->cmin_flt;
1744                         r->ru_majflt = p->signal->cmaj_flt;
1745                         spin_unlock_irqrestore(&p->sighand->siglock, flags);
1746
1747                         if (who == RUSAGE_CHILDREN)
1748                                 break;
1749
1750                 case RUSAGE_SELF:
1751                         utime = cputime_add(utime, p->signal->utime);
1752                         stime = cputime_add(stime, p->signal->stime);
1753                         r->ru_nvcsw += p->signal->nvcsw;
1754                         r->ru_nivcsw += p->signal->nivcsw;
1755                         r->ru_minflt += p->signal->min_flt;
1756                         r->ru_majflt += p->signal->maj_flt;
1757                         t = p;
1758                         do {
1759                                 utime = cputime_add(utime, t->utime);
1760                                 stime = cputime_add(stime, t->stime);
1761                                 r->ru_nvcsw += t->nvcsw;
1762                                 r->ru_nivcsw += t->nivcsw;
1763                                 r->ru_minflt += t->min_flt;
1764                                 r->ru_majflt += t->maj_flt;
1765                                 t = next_thread(t);
1766                         } while (t != p);
1767                         break;
1768
1769                 default:
1770                         BUG();
1771         }
1772
1773         if (need_lock)
1774                 read_unlock(&tasklist_lock);
1775         cputime_to_timeval(utime, &r->ru_utime);
1776         cputime_to_timeval(stime, &r->ru_stime);
1777 }
1778
1779 int getrusage(struct task_struct *p, int who, struct rusage __user *ru)
1780 {
1781         struct rusage r;
1782         k_getrusage(p, who, &r);
1783         return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
1784 }
1785
1786 asmlinkage long sys_getrusage(int who, struct rusage __user *ru)
1787 {
1788         if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN)
1789                 return -EINVAL;
1790         return getrusage(current, who, ru);
1791 }
1792
1793 asmlinkage long sys_umask(int mask)
1794 {
1795         mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
1796         return mask;
1797 }
1798
1799 asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
1800                           unsigned long arg4, unsigned long arg5)
1801 {
1802         long error;
1803
1804         error = security_task_prctl(option, arg2, arg3, arg4, arg5);
1805         if (error)
1806                 return error;
1807
1808         switch (option) {
1809                 case PR_SET_PDEATHSIG:
1810                         if (!valid_signal(arg2)) {
1811                                 error = -EINVAL;
1812                                 break;
1813                         }
1814                         current->pdeath_signal = arg2;
1815                         break;
1816                 case PR_GET_PDEATHSIG:
1817                         error = put_user(current->pdeath_signal, (int __user *)arg2);
1818                         break;
1819                 case PR_GET_DUMPABLE:
1820                         error = current->mm->dumpable;
1821                         break;
1822                 case PR_SET_DUMPABLE:
1823                         if (arg2 < 0 || arg2 > 2) {
1824                                 error = -EINVAL;
1825                                 break;
1826                         }
1827                         current->mm->dumpable = arg2;
1828                         break;
1829
1830                 case PR_SET_UNALIGN:
1831                         error = SET_UNALIGN_CTL(current, arg2);
1832                         break;
1833                 case PR_GET_UNALIGN:
1834                         error = GET_UNALIGN_CTL(current, arg2);
1835                         break;
1836                 case PR_SET_FPEMU:
1837                         error = SET_FPEMU_CTL(current, arg2);
1838                         break;
1839                 case PR_GET_FPEMU:
1840                         error = GET_FPEMU_CTL(current, arg2);
1841                         break;
1842                 case PR_SET_FPEXC:
1843                         error = SET_FPEXC_CTL(current, arg2);
1844                         break;
1845                 case PR_GET_FPEXC:
1846                         error = GET_FPEXC_CTL(current, arg2);
1847                         break;
1848                 case PR_GET_TIMING:
1849                         error = PR_TIMING_STATISTICAL;
1850                         break;
1851                 case PR_SET_TIMING:
1852                         if (arg2 == PR_TIMING_STATISTICAL)
1853                                 error = 0;
1854                         else
1855                                 error = -EINVAL;
1856                         break;
1857
1858                 case PR_GET_KEEPCAPS:
1859                         if (current->keep_capabilities)
1860                                 error = 1;
1861                         break;
1862                 case PR_SET_KEEPCAPS:
1863                         if (arg2 != 0 && arg2 != 1) {
1864                                 error = -EINVAL;
1865                                 break;
1866                         }
1867                         current->keep_capabilities = arg2;
1868                         break;
1869                 case PR_SET_NAME: {
1870                         struct task_struct *me = current;
1871                         unsigned char ncomm[sizeof(me->comm)];
1872
1873                         ncomm[sizeof(me->comm)-1] = 0;
1874                         if (strncpy_from_user(ncomm, (char __user *)arg2,
1875                                                 sizeof(me->comm)-1) < 0)
1876                                 return -EFAULT;
1877                         set_task_comm(me, ncomm);
1878                         return 0;
1879                 }
1880                 case PR_GET_NAME: {
1881                         struct task_struct *me = current;
1882                         unsigned char tcomm[sizeof(me->comm)];
1883
1884                         get_task_comm(tcomm, me);
1885                         if (copy_to_user((char __user *)arg2, tcomm, sizeof(tcomm)))
1886                                 return -EFAULT;
1887                         return 0;
1888                 }
1889                 default:
1890                         error = -EINVAL;
1891                         break;
1892         }
1893         return error;
1894 }