hamradio/scc: add missing block braces to multi-statement if
[linux/fpc-iii.git] / drivers / media / dvb / b2c2 / flexcop-fe-tuner.c
blobf9d087669d5db3dce7de713182e50eec8bdcc6d6
1 /*
2 * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
4 * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
6 * see flexcop.c for copyright information.
7 */
8 #include <media/tuner.h>
10 #include "flexcop.h"
12 #include "stv0299.h"
13 #include "mt352.h"
14 #include "nxt200x.h"
15 #include "bcm3510.h"
16 #include "stv0297.h"
17 #include "mt312.h"
18 #include "lgdt330x.h"
19 #include "dvb-pll.h"
20 #include "tuner-simple.h"
22 #include "s5h1420.h"
23 #include "itd1000.h"
25 #include "cx24123.h"
26 #include "cx24113.h"
28 #include "isl6421.h"
30 /* lnb control */
32 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
34 struct flexcop_device *fc = fe->dvb->priv;
35 flexcop_ibi_value v;
36 deb_tuner("polarity/voltage = %u\n", voltage);
38 v = fc->read_ibi_reg(fc, misc_204);
39 switch (voltage) {
40 case SEC_VOLTAGE_OFF:
41 v.misc_204.ACPI1_sig = 1;
42 break;
43 case SEC_VOLTAGE_13:
44 v.misc_204.ACPI1_sig = 0;
45 v.misc_204.LNB_L_H_sig = 0;
46 break;
47 case SEC_VOLTAGE_18:
48 v.misc_204.ACPI1_sig = 0;
49 v.misc_204.LNB_L_H_sig = 1;
50 break;
51 default:
52 err("unknown SEC_VOLTAGE value");
53 return -EINVAL;
55 return fc->write_ibi_reg(fc, misc_204, v);
58 static int flexcop_sleep(struct dvb_frontend* fe)
60 struct flexcop_device *fc = fe->dvb->priv;
61 /* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
63 if (fc->fe_sleep)
64 return fc->fe_sleep(fe);
66 /* v.misc_204.ACPI3_sig = 1;
67 fc->write_ibi_reg(fc,misc_204,v);*/
69 return 0;
72 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
74 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
75 struct flexcop_device *fc = fe->dvb->priv;
76 flexcop_ibi_value v;
77 u16 ax;
78 v.raw = 0;
80 deb_tuner("tone = %u\n",tone);
82 switch (tone) {
83 case SEC_TONE_ON:
84 ax = 0x01ff;
85 break;
86 case SEC_TONE_OFF:
87 ax = 0;
88 break;
89 default:
90 err("unknown SEC_TONE value");
91 return -EINVAL;
94 v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
96 v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
97 v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax;
99 return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
102 static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
104 flexcop_set_tone(fe, SEC_TONE_ON);
105 udelay(data ? 500 : 1000);
106 flexcop_set_tone(fe, SEC_TONE_OFF);
107 udelay(data ? 1000 : 500);
110 static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
112 int i, par = 1, d;
114 for (i = 7; i >= 0; i--) {
115 d = (data >> i) & 1;
116 par ^= d;
117 flexcop_diseqc_send_bit(fe, d);
120 flexcop_diseqc_send_bit(fe, par);
123 static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
125 int i;
127 flexcop_set_tone(fe, SEC_TONE_OFF);
128 mdelay(16);
130 for (i = 0; i < len; i++)
131 flexcop_diseqc_send_byte(fe,msg[i]);
133 mdelay(16);
135 if (burst != -1) {
136 if (burst)
137 flexcop_diseqc_send_byte(fe, 0xff);
138 else {
139 flexcop_set_tone(fe, SEC_TONE_ON);
140 udelay(12500);
141 flexcop_set_tone(fe, SEC_TONE_OFF);
143 msleep(20);
145 return 0;
148 static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
150 return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
153 static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
155 return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
158 /* dvb-s stv0299 */
159 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
161 u8 aclk = 0;
162 u8 bclk = 0;
164 if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
165 else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
166 else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
167 else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
168 else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
169 else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
171 stv0299_writereg (fe, 0x13, aclk);
172 stv0299_writereg (fe, 0x14, bclk);
173 stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
174 stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
175 stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
177 return 0;
180 static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
182 u8 buf[4];
183 u32 div;
184 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
185 struct flexcop_device *fc = fe->dvb->priv;
187 div = params->frequency / 125;
189 buf[0] = (div >> 8) & 0x7f;
190 buf[1] = div & 0xff;
191 buf[2] = 0x84; /* 0xC4 */
192 buf[3] = 0x08;
194 if (params->frequency < 1500000)
195 buf[3] |= 0x10;
197 if (fe->ops.i2c_gate_ctrl)
198 fe->ops.i2c_gate_ctrl(fe, 1);
199 if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
200 return -EIO;
201 return 0;
204 static u8 samsung_tbmu24112_inittab[] = {
205 0x01, 0x15,
206 0x02, 0x30,
207 0x03, 0x00,
208 0x04, 0x7D,
209 0x05, 0x35,
210 0x06, 0x02,
211 0x07, 0x00,
212 0x08, 0xC3,
213 0x0C, 0x00,
214 0x0D, 0x81,
215 0x0E, 0x23,
216 0x0F, 0x12,
217 0x10, 0x7E,
218 0x11, 0x84,
219 0x12, 0xB9,
220 0x13, 0x88,
221 0x14, 0x89,
222 0x15, 0xC9,
223 0x16, 0x00,
224 0x17, 0x5C,
225 0x18, 0x00,
226 0x19, 0x00,
227 0x1A, 0x00,
228 0x1C, 0x00,
229 0x1D, 0x00,
230 0x1E, 0x00,
231 0x1F, 0x3A,
232 0x20, 0x2E,
233 0x21, 0x80,
234 0x22, 0xFF,
235 0x23, 0xC1,
236 0x28, 0x00,
237 0x29, 0x1E,
238 0x2A, 0x14,
239 0x2B, 0x0F,
240 0x2C, 0x09,
241 0x2D, 0x05,
242 0x31, 0x1F,
243 0x32, 0x19,
244 0x33, 0xFE,
245 0x34, 0x93,
246 0xff, 0xff,
249 static struct stv0299_config samsung_tbmu24112_config = {
250 .demod_address = 0x68,
251 .inittab = samsung_tbmu24112_inittab,
252 .mclk = 88000000UL,
253 .invert = 0,
254 .skip_reinit = 0,
255 .lock_output = STV0299_LOCKOUTPUT_LK,
256 .volt13_op0_op1 = STV0299_VOLT13_OP1,
257 .min_delay_ms = 100,
258 .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
261 /* dvb-t mt352 */
262 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
264 static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
265 static u8 mt352_reset [] = { 0x50, 0x80 };
266 static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
267 static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
268 static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
270 mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
271 udelay(2000);
272 mt352_write(fe, mt352_reset, sizeof(mt352_reset));
273 mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
275 mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
276 mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
278 return 0;
281 static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
283 u32 div;
284 unsigned char bs = 0;
286 if (buf_len < 5)
287 return -EINVAL;
289 #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
290 div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
292 if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
293 if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
294 if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
296 pllbuf[0] = 0x61;
297 pllbuf[1] = div >> 8;
298 pllbuf[2] = div & 0xff;
299 pllbuf[3] = 0xcc;
300 pllbuf[4] = bs;
302 return 5;
305 static struct mt352_config samsung_tdtc9251dh0_config = {
306 .demod_address = 0x0f,
307 .demod_init = samsung_tdtc9251dh0_demod_init,
310 static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
312 struct flexcop_device *fc = fe->dvb->priv;
313 return request_firmware(fw, name, fc->dev);
316 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
317 .demod_address = 0x59,
318 .demod_chip = LGDT3303,
319 .serial_mpeg = 0x04,
320 .clock_polarity_flip = 1,
323 static struct nxt200x_config samsung_tbmv_config = {
324 .demod_address = 0x0a,
327 static struct bcm3510_config air2pc_atsc_first_gen_config = {
328 .demod_address = 0x0f,
329 .request_firmware = flexcop_fe_request_firmware,
332 static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
334 u8 buf[4];
335 u32 div;
336 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
337 struct flexcop_device *fc = fe->dvb->priv;
339 div = (params->frequency + (125/2)) / 125;
341 buf[0] = (div >> 8) & 0x7f;
342 buf[1] = (div >> 0) & 0xff;
343 buf[2] = 0x84 | ((div >> 10) & 0x60);
344 buf[3] = 0x80;
346 if (params->frequency < 1550000)
347 buf[3] |= 0x02;
349 if (fe->ops.i2c_gate_ctrl)
350 fe->ops.i2c_gate_ctrl(fe, 1);
351 if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1)
352 return -EIO;
353 return 0;
356 static struct mt312_config skystar23_samsung_tbdu18132_config = {
358 .demod_address = 0x0e,
361 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
362 struct dvb_frontend_parameters *fep)
364 struct flexcop_device *fc = fe->dvb->priv;
365 u8 buf[4];
366 u16 div;
367 int ret;
369 /* 62.5 kHz * 10 */
370 #define REF_FREQ 625
371 #define FREQ_OFFSET 36125
373 div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10) / REF_FREQ; // 4 MHz = 4000 KHz
375 buf[0] = (u8)( div >> 8) & 0x7f;
376 buf[1] = (u8) div & 0xff;
378 /* F(osc) = N * Reference Freq. (62.5 kHz)
379 * byte 2 : 0 N14 N13 N12 N11 N10 N9 N8
380 * byte 3 : N7 N6 N5 N4 N3 N2 N1 N0
381 * byte 4 : 1 * * AGD R3 R2 R1 R0
382 * byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1
383 * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
384 buf[2] = 0x95;
386 // Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5
387 // 47 - 153 0 * 0 0 0 0 0 1 0x01
388 // 153 - 430 0 * 0 0 0 0 1 0 0x02
389 // 430 - 822 0 * 0 0 1 0 0 0 0x08
390 // 822 - 862 1 * 0 0 1 0 0 0 0x88
392 if (fep->frequency <= 153000000) buf[3] = 0x01;
393 else if (fep->frequency <= 430000000) buf[3] = 0x02;
394 else if (fep->frequency <= 822000000) buf[3] = 0x08;
395 else buf[3] = 0x88;
397 if (fe->ops.i2c_gate_ctrl)
398 fe->ops.i2c_gate_ctrl(fe, 0);
399 deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]);
400 ret = fc->i2c_request(&fc->fc_i2c_adap[2],
401 FC_WRITE, 0x61, buf[0], &buf[1], 3);
402 deb_tuner("tuner write returned: %d\n",ret);
404 return ret;
407 static u8 alps_tdee4_stv0297_inittab[] = {
408 0x80, 0x01,
409 0x80, 0x00,
410 0x81, 0x01,
411 0x81, 0x00,
412 0x00, 0x48,
413 0x01, 0x58,
414 0x03, 0x00,
415 0x04, 0x00,
416 0x07, 0x00,
417 0x08, 0x00,
418 0x30, 0xff,
419 0x31, 0x9d,
420 0x32, 0xff,
421 0x33, 0x00,
422 0x34, 0x29,
423 0x35, 0x55,
424 0x36, 0x80,
425 0x37, 0x6e,
426 0x38, 0x9c,
427 0x40, 0x1a,
428 0x41, 0xfe,
429 0x42, 0x33,
430 0x43, 0x00,
431 0x44, 0xff,
432 0x45, 0x00,
433 0x46, 0x00,
434 0x49, 0x04,
435 0x4a, 0x51,
436 0x4b, 0xf8,
437 0x52, 0x30,
438 0x53, 0x06,
439 0x59, 0x06,
440 0x5a, 0x5e,
441 0x5b, 0x04,
442 0x61, 0x49,
443 0x62, 0x0a,
444 0x70, 0xff,
445 0x71, 0x04,
446 0x72, 0x00,
447 0x73, 0x00,
448 0x74, 0x0c,
449 0x80, 0x20,
450 0x81, 0x00,
451 0x82, 0x30,
452 0x83, 0x00,
453 0x84, 0x04,
454 0x85, 0x22,
455 0x86, 0x08,
456 0x87, 0x1b,
457 0x88, 0x00,
458 0x89, 0x00,
459 0x90, 0x00,
460 0x91, 0x04,
461 0xa0, 0x86,
462 0xa1, 0x00,
463 0xa2, 0x00,
464 0xb0, 0x91,
465 0xb1, 0x0b,
466 0xc0, 0x5b,
467 0xc1, 0x10,
468 0xc2, 0x12,
469 0xd0, 0x02,
470 0xd1, 0x00,
471 0xd2, 0x00,
472 0xd3, 0x00,
473 0xd4, 0x02,
474 0xd5, 0x00,
475 0xde, 0x00,
476 0xdf, 0x01,
477 0xff, 0xff,
480 static struct stv0297_config alps_tdee4_stv0297_config = {
481 .demod_address = 0x1c,
482 .inittab = alps_tdee4_stv0297_inittab,
483 // .invert = 1,
484 // .pll_set = alps_tdee4_stv0297_pll_set,
488 /* SkyStar2 rev2.7 (a/u) */
489 static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
490 .demod_address = 0x53,
491 .invert = 1,
492 .repeated_start_workaround = 1,
495 static struct itd1000_config skystar2_rev2_7_itd1000_config = {
496 .i2c_address = 0x61,
499 /* SkyStar2 rev2.8 */
500 static struct cx24123_config skystar2_rev2_8_cx24123_config = {
501 .demod_address = 0x55,
502 .dont_use_pll = 1,
503 .agc_callback = cx24113_agc_callback,
506 static const struct cx24113_config skystar2_rev2_8_cx24113_config = {
507 .i2c_addr = 0x54,
508 .xtal_khz = 10111,
511 /* try to figure out the frontend, each card/box can have on of the following list */
512 int flexcop_frontend_init(struct flexcop_device *fc)
514 struct dvb_frontend_ops *ops;
515 struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap;
516 struct i2c_adapter *i2c_tuner;
518 /* enable no_base_addr - no repeated start when reading */
519 fc->fc_i2c_adap[0].no_base_addr = 1;
520 fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c);
521 if (fc->fe != NULL) {
522 flexcop_ibi_value r108;
523 i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe);
524 ops = &fc->fe->ops;
526 fc->fe_sleep = ops->sleep;
527 ops->sleep = flexcop_sleep;
529 fc->dev_type = FC_SKY_REV27;
531 /* enable no_base_addr - no repeated start when reading */
532 fc->fc_i2c_adap[2].no_base_addr = 1;
533 if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL)
534 err("ISL6421 could NOT be attached");
535 else
536 info("ISL6421 successfully attached");
538 /* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */
539 r108.raw = 0x00000506;
540 fc->write_ibi_reg(fc, tw_sm_c_108, r108);
541 if (i2c_tuner) {
542 if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL)
543 err("ITD1000 could NOT be attached");
544 else
545 info("ITD1000 successfully attached");
547 goto fe_found;
549 fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */
551 /* try the sky v2.8 (cx24123, isl6421) */
552 fc->fe = dvb_attach(cx24123_attach,
553 &skystar2_rev2_8_cx24123_config, i2c);
554 if (fc->fe != NULL) {
555 i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe);
556 if (i2c_tuner != NULL) {
557 if (dvb_attach(cx24113_attach, fc->fe,
558 &skystar2_rev2_8_cx24113_config,
559 i2c_tuner) == NULL)
560 err("CX24113 could NOT be attached");
561 else
562 info("CX24113 successfully attached");
565 fc->dev_type = FC_SKY_REV28;
567 fc->fc_i2c_adap[2].no_base_addr = 1;
568 if (dvb_attach(isl6421_attach, fc->fe,
569 &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL)
570 err("ISL6421 could NOT be attached");
571 else
572 info("ISL6421 successfully attached");
574 /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an
575 * IR-receiver (PIC16F818) - but the card has no input for
576 * that ??? */
578 goto fe_found;
581 /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
582 fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c);
583 if (fc->fe != NULL) {
584 ops = &fc->fe->ops;
586 ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
588 ops->set_voltage = flexcop_set_voltage;
590 fc->fe_sleep = ops->sleep;
591 ops->sleep = flexcop_sleep;
593 fc->dev_type = FC_SKY;
594 goto fe_found;
597 /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
598 fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c);
599 if (fc->fe != NULL) {
600 fc->dev_type = FC_AIR_DVB;
601 fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
602 goto fe_found;
605 /* try the air atsc 2nd generation (nxt2002) */
606 fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c);
607 if (fc->fe != NULL) {
608 fc->dev_type = FC_AIR_ATSC2;
609 dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV);
610 goto fe_found;
613 fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c);
614 if (fc->fe != NULL) {
615 fc->dev_type = FC_AIR_ATSC3;
616 dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
617 TUNER_LG_TDVS_H06XF);
618 goto fe_found;
621 /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
622 fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
623 if (fc->fe != NULL) {
624 fc->dev_type = FC_AIR_ATSC1;
625 goto fe_found;
628 /* try the cable dvb (stv0297) */
629 fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
630 if (fc->fe != NULL) {
631 fc->dev_type = FC_CABLE;
632 fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
633 goto fe_found;
636 /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
637 fc->fe = dvb_attach(mt312_attach,
638 &skystar23_samsung_tbdu18132_config, i2c);
639 if (fc->fe != NULL) {
640 ops = &fc->fe->ops;
642 ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params;
644 ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
645 ops->diseqc_send_burst = flexcop_diseqc_send_burst;
646 ops->set_tone = flexcop_set_tone;
647 ops->set_voltage = flexcop_set_voltage;
649 fc->fe_sleep = ops->sleep;
650 ops->sleep = flexcop_sleep;
652 fc->dev_type = FC_SKY_OLD;
653 goto fe_found;
656 err("no frontend driver found for this B2C2/FlexCop adapter");
657 return -ENODEV;
659 fe_found:
660 info("found '%s' .", fc->fe->ops.info.name);
661 if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
662 err("frontend registration failed!");
663 ops = &fc->fe->ops;
664 if (ops->release != NULL)
665 ops->release(fc->fe);
666 fc->fe = NULL;
667 return -EINVAL;
669 fc->init_state |= FC_STATE_FE_INIT;
670 return 0;
673 void flexcop_frontend_exit(struct flexcop_device *fc)
675 if (fc->init_state & FC_STATE_FE_INIT) {
676 dvb_unregister_frontend(fc->fe);
677 dvb_frontend_detach(fc->fe);
680 fc->init_state &= ~FC_STATE_FE_INIT;