staging: rtl8188eu: remove unused members from struct recv_priv
[linux/fpc-iii.git] / drivers / cpufreq / Kconfig.arm
blob920c469f3953e890bd747413750be8ad6a4352e2
2 # ARM CPU Frequency scaling drivers
5 # big LITTLE core layer and glue drivers
6 config ARM_BIG_LITTLE_CPUFREQ
7 tristate "Generic ARM big LITTLE CPUfreq driver"
8 depends on (ARM_CPU_TOPOLOGY || ARM64) && HAVE_CLK
9 # if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y
10 depends on !CPU_THERMAL || THERMAL
11 select PM_OPP
12 help
13 This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
15 config ARM_BRCMSTB_AVS_CPUFREQ
16 tristate "Broadcom STB AVS CPUfreq driver"
17 depends on ARCH_BRCMSTB || COMPILE_TEST
18 default y
19 help
20 Some Broadcom STB SoCs use a co-processor running proprietary firmware
21 ("AVS") to handle voltage and frequency scaling. This driver provides
22 a standard CPUfreq interface to to the firmware.
24 Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.
26 config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
27 bool "Broadcom STB AVS CPUfreq driver sysfs debug capability"
28 depends on ARM_BRCMSTB_AVS_CPUFREQ
29 help
30 Enabling this option turns on debug support via sysfs under
31 /sys/kernel/debug/brcmstb-avs-cpufreq. It is possible to read all and
32 write some AVS mailbox registers through sysfs entries.
34 If in doubt, say N.
36 config ARM_DT_BL_CPUFREQ
37 tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
38 depends on ARM_BIG_LITTLE_CPUFREQ && OF
39 help
40 This enables probing via DT for Generic CPUfreq driver for ARM
41 big.LITTLE platform. This gets frequency tables from DT.
43 config ARM_VEXPRESS_SPC_CPUFREQ
44 tristate "Versatile Express SPC based CPUfreq driver"
45 depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
46 help
47 This add the CPUfreq driver support for Versatile Express
48 big.LITTLE platforms using SPC for power management.
50 config ARM_EXYNOS5440_CPUFREQ
51 tristate "SAMSUNG EXYNOS5440"
52 depends on SOC_EXYNOS5440
53 depends on HAVE_CLK && OF
54 select PM_OPP
55 default y
56 help
57 This adds the CPUFreq driver for Samsung EXYNOS5440
58 SoC. The nature of exynos5440 clock controller is
59 different than previous exynos controllers so not using
60 the common exynos framework.
62 If in doubt, say N.
64 config ARM_HIGHBANK_CPUFREQ
65 tristate "Calxeda Highbank-based"
66 depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
67 default m
68 help
69 This adds the CPUFreq driver for Calxeda Highbank SoC
70 based boards.
72 If in doubt, say N.
74 config ARM_IMX6Q_CPUFREQ
75 tristate "Freescale i.MX6 cpufreq support"
76 depends on ARCH_MXC
77 depends on REGULATOR_ANATOP
78 select PM_OPP
79 help
80 This adds cpufreq driver support for Freescale i.MX6 series SoCs.
82 If in doubt, say N.
84 config ARM_KIRKWOOD_CPUFREQ
85 def_bool MACH_KIRKWOOD
86 help
87 This adds the CPUFreq driver for Marvell Kirkwood
88 SoCs.
90 config ARM_MT8173_CPUFREQ
91 tristate "Mediatek MT8173 CPUFreq support"
92 depends on ARCH_MEDIATEK && REGULATOR
93 depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
94 depends on !CPU_THERMAL || THERMAL
95 select PM_OPP
96 help
97 This adds the CPUFreq driver support for Mediatek MT8173 SoC.
99 config ARM_OMAP2PLUS_CPUFREQ
100 bool "TI OMAP2+"
101 depends on ARCH_OMAP2PLUS
102 default ARCH_OMAP2PLUS
104 config ARM_S3C_CPUFREQ
105 bool
106 help
107 Internal configuration node for common cpufreq on Samsung SoC
109 config ARM_S3C24XX_CPUFREQ
110 bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
111 depends on ARCH_S3C24XX
112 select ARM_S3C_CPUFREQ
113 help
114 This enables the CPUfreq driver for the Samsung S3C24XX family
115 of CPUs.
117 For details, take a look at <file:Documentation/cpu-freq>.
119 If in doubt, say N.
121 config ARM_S3C24XX_CPUFREQ_DEBUG
122 bool "Debug CPUfreq Samsung driver core"
123 depends on ARM_S3C24XX_CPUFREQ
124 help
125 Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
127 config ARM_S3C24XX_CPUFREQ_IODEBUG
128 bool "Debug CPUfreq Samsung driver IO timing"
129 depends on ARM_S3C24XX_CPUFREQ
130 help
131 Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
133 config ARM_S3C24XX_CPUFREQ_DEBUGFS
134 bool "Export debugfs for CPUFreq"
135 depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
136 help
137 Export status information via debugfs.
139 config ARM_S3C2410_CPUFREQ
140 bool
141 depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
142 select S3C2410_CPUFREQ_UTILS
143 help
144 CPU Frequency scaling support for S3C2410
146 config ARM_S3C2412_CPUFREQ
147 bool
148 depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
149 default y
150 select S3C2412_IOTIMING
151 help
152 CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
154 config ARM_S3C2416_CPUFREQ
155 bool "S3C2416 CPU Frequency scaling support"
156 depends on CPU_S3C2416
157 help
158 This adds the CPUFreq driver for the Samsung S3C2416 and
159 S3C2450 SoC. The S3C2416 supports changing the rate of the
160 armdiv clock source and also entering a so called dynamic
161 voltage scaling mode in which it is possible to reduce the
162 core voltage of the CPU.
164 If in doubt, say N.
166 config ARM_S3C2416_CPUFREQ_VCORESCALE
167 bool "Allow voltage scaling for S3C2416 arm core"
168 depends on ARM_S3C2416_CPUFREQ && REGULATOR
169 help
170 Enable CPU voltage scaling when entering the dvs mode.
171 It uses information gathered through existing hardware and
172 tests but not documented in any datasheet.
174 If in doubt, say N.
176 config ARM_S3C2440_CPUFREQ
177 bool "S3C2440/S3C2442 CPU Frequency scaling support"
178 depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
179 select S3C2410_CPUFREQ_UTILS
180 default y
181 help
182 CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
184 config ARM_S3C64XX_CPUFREQ
185 bool "Samsung S3C64XX"
186 depends on CPU_S3C6410
187 default y
188 help
189 This adds the CPUFreq driver for Samsung S3C6410 SoC.
191 If in doubt, say N.
193 config ARM_S5PV210_CPUFREQ
194 bool "Samsung S5PV210 and S5PC110"
195 depends on CPU_S5PV210
196 default y
197 help
198 This adds the CPUFreq driver for Samsung S5PV210 and
199 S5PC110 SoCs.
201 If in doubt, say N.
203 config ARM_SA1100_CPUFREQ
204 bool
206 config ARM_SA1110_CPUFREQ
207 bool
209 config ARM_SCPI_CPUFREQ
210 tristate "SCPI based CPUfreq driver"
211 depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
212 help
213 This adds the CPUfreq driver support for ARM big.LITTLE platforms
214 using SCPI protocol for CPU power management.
216 This driver uses SCPI Message Protocol driver to interact with the
217 firmware providing the CPU DVFS functionality.
219 config ARM_SPEAR_CPUFREQ
220 bool "SPEAr CPUFreq support"
221 depends on PLAT_SPEAR
222 default y
223 help
224 This adds the CPUFreq driver support for SPEAr SOCs.
226 config ARM_STI_CPUFREQ
227 tristate "STi CPUFreq support"
228 depends on SOC_STIH407
229 help
230 This driver uses the generic OPP framework to match the running
231 platform with a predefined set of suitable values. If not provided
232 we will fall-back so safe-values contained in Device Tree. Enable
233 this config option if you wish to add CPUFreq support for STi based
234 SoCs.
236 config ARM_TEGRA20_CPUFREQ
237 bool "Tegra20 CPUFreq support"
238 depends on ARCH_TEGRA
239 default y
240 help
241 This adds the CPUFreq driver support for Tegra20 SOCs.
243 config ARM_TEGRA124_CPUFREQ
244 tristate "Tegra124 CPUFreq support"
245 depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR
246 default y
247 help
248 This adds the CPUFreq driver support for Tegra124 SOCs.
250 config ARM_PXA2xx_CPUFREQ
251 tristate "Intel PXA2xx CPUfreq driver"
252 depends on PXA27x || PXA25x
253 help
254 This add the CPUFreq driver support for Intel PXA2xx SOCs.
256 If in doubt, say N.
258 config ACPI_CPPC_CPUFREQ
259 tristate "CPUFreq driver based on the ACPI CPPC spec"
260 depends on ACPI
261 select ACPI_CPPC_LIB
262 default n
263 help
264 This adds a CPUFreq driver which uses CPPC methods
265 as described in the ACPIv5.1 spec. CPPC stands for
266 Collaborative Processor Performance Controls. It
267 is based on an abstract continuous scale of CPU
268 performance values which allows the remote power
269 processor to flexibly optimize for power and
270 performance. CPPC relies on power management firmware
271 support for its operation.
273 If in doubt, say N.