staging: rtl8188eu: remove unused members from struct recv_priv
[linux/fpc-iii.git] / drivers / mfd / stmpe.h
blobf7efdd8a5fc6301610a7e21593c69d7e7e07d757
1 /*
2 * Copyright (C) ST-Ericsson SA 2010
4 * License Terms: GNU General Public License, version 2
5 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
6 */
8 #ifndef __STMPE_H
9 #define __STMPE_H
11 #include <linux/device.h>
12 #include <linux/mfd/core.h>
13 #include <linux/mfd/stmpe.h>
14 #include <linux/printk.h>
15 #include <linux/types.h>
17 extern const struct dev_pm_ops stmpe_dev_pm_ops;
19 #ifdef STMPE_DUMP_BYTES
20 static inline void stmpe_dump_bytes(const char *str, const void *buf,
21 size_t len)
23 print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len);
25 #else
26 static inline void stmpe_dump_bytes(const char *str, const void *buf,
27 size_t len)
30 #endif
32 /**
33 * struct stmpe_variant_block - information about block
34 * @cell: base mfd cell
35 * @irq: interrupt number to be added to each IORESOURCE_IRQ
36 * in the cell
37 * @block: block id; used for identification with platform data and for
38 * enable and altfunc callbacks
40 struct stmpe_variant_block {
41 const struct mfd_cell *cell;
42 int irq;
43 enum stmpe_block block;
46 /**
47 * struct stmpe_variant_info - variant-specific information
48 * @name: part name
49 * @id_val: content of CHIPID register
50 * @id_mask: bits valid in CHIPID register for comparison with id_val
51 * @num_gpios: number of GPIOS
52 * @af_bits: number of bits used to specify the alternate function
53 * @regs: variant specific registers.
54 * @blocks: list of blocks present on this device
55 * @num_blocks: number of blocks present on this device
56 * @num_irqs: number of internal IRQs available on this device
57 * @enable: callback to enable the specified blocks.
58 * Called with the I/O lock held.
59 * @get_altfunc: callback to get the alternate function number for the
60 * specific block
61 * @enable_autosleep: callback to configure autosleep with specified timeout
63 struct stmpe_variant_info {
64 const char *name;
65 u16 id_val;
66 u16 id_mask;
67 int num_gpios;
68 int af_bits;
69 const u8 *regs;
70 struct stmpe_variant_block *blocks;
71 int num_blocks;
72 int num_irqs;
73 int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable);
74 int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block);
75 int (*enable_autosleep)(struct stmpe *stmpe, int autosleep_timeout);
78 /**
79 * struct stmpe_client_info - i2c or spi specific routines/info
80 * @data: client specific data
81 * @read_byte: read single byte
82 * @write_byte: write single byte
83 * @read_block: read block or multiple bytes
84 * @write_block: write block or multiple bytes
85 * @init: client init routine, called during probe
87 struct stmpe_client_info {
88 void *data;
89 int irq;
90 void *client;
91 struct device *dev;
92 int (*read_byte)(struct stmpe *stmpe, u8 reg);
93 int (*write_byte)(struct stmpe *stmpe, u8 reg, u8 val);
94 int (*read_block)(struct stmpe *stmpe, u8 reg, u8 len, u8 *values);
95 int (*write_block)(struct stmpe *stmpe, u8 reg, u8 len,
96 const u8 *values);
97 void (*init)(struct stmpe *stmpe);
100 int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum);
101 int stmpe_remove(struct stmpe *stmpe);
103 #define STMPE_ICR_LSB_HIGH (1 << 2)
104 #define STMPE_ICR_LSB_EDGE (1 << 1)
105 #define STMPE_ICR_LSB_GIM (1 << 0)
107 #define STMPE_SYS_CTRL_RESET (1 << 7)
108 #define STMPE_SYS_CTRL_INT_EN (1 << 2)
109 #define STMPE_SYS_CTRL_INT_HI (1 << 0)
112 * STMPE801
114 #define STMPE801_ID 0x0108
115 #define STMPE801_NR_INTERNAL_IRQS 1
117 #define STMPE801_REG_CHIP_ID 0x00
118 #define STMPE801_REG_VERSION_ID 0x02
119 #define STMPE801_REG_SYS_CTRL 0x04
120 #define STMPE801_REG_GPIO_INT_EN 0x08
121 #define STMPE801_REG_GPIO_INT_STA 0x09
122 #define STMPE801_REG_GPIO_MP_STA 0x10
123 #define STMPE801_REG_GPIO_SET_PIN 0x11
124 #define STMPE801_REG_GPIO_DIR 0x12
127 * STMPE811
129 #define STMPE811_ID 0x0811
131 #define STMPE811_IRQ_TOUCH_DET 0
132 #define STMPE811_IRQ_FIFO_TH 1
133 #define STMPE811_IRQ_FIFO_OFLOW 2
134 #define STMPE811_IRQ_FIFO_FULL 3
135 #define STMPE811_IRQ_FIFO_EMPTY 4
136 #define STMPE811_IRQ_TEMP_SENS 5
137 #define STMPE811_IRQ_ADC 6
138 #define STMPE811_IRQ_GPIOC 7
139 #define STMPE811_NR_INTERNAL_IRQS 8
141 #define STMPE811_REG_CHIP_ID 0x00
142 #define STMPE811_REG_SYS_CTRL 0x03
143 #define STMPE811_REG_SYS_CTRL2 0x04
144 #define STMPE811_REG_SPI_CFG 0x08
145 #define STMPE811_REG_INT_CTRL 0x09
146 #define STMPE811_REG_INT_EN 0x0A
147 #define STMPE811_REG_INT_STA 0x0B
148 #define STMPE811_REG_GPIO_INT_EN 0x0C
149 #define STMPE811_REG_GPIO_INT_STA 0x0D
150 #define STMPE811_REG_GPIO_SET_PIN 0x10
151 #define STMPE811_REG_GPIO_CLR_PIN 0x11
152 #define STMPE811_REG_GPIO_MP_STA 0x12
153 #define STMPE811_REG_GPIO_DIR 0x13
154 #define STMPE811_REG_GPIO_ED 0x14
155 #define STMPE811_REG_GPIO_RE 0x15
156 #define STMPE811_REG_GPIO_FE 0x16
157 #define STMPE811_REG_GPIO_AF 0x17
159 #define STMPE811_SYS_CTRL_RESET (1 << 1)
161 #define STMPE811_SYS_CTRL2_ADC_OFF (1 << 0)
162 #define STMPE811_SYS_CTRL2_TSC_OFF (1 << 1)
163 #define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2)
164 #define STMPE811_SYS_CTRL2_TS_OFF (1 << 3)
167 * STMPE1600
169 #define STMPE1600_ID 0x0016
170 #define STMPE1600_NR_INTERNAL_IRQS 16
172 #define STMPE1600_REG_CHIP_ID 0x00
173 #define STMPE1600_REG_SYS_CTRL 0x03
174 #define STMPE1600_REG_IEGPIOR_LSB 0x08
175 #define STMPE1600_REG_IEGPIOR_MSB 0x09
176 #define STMPE1600_REG_ISGPIOR_LSB 0x0A
177 #define STMPE1600_REG_ISGPIOR_MSB 0x0B
178 #define STMPE1600_REG_GPMR_LSB 0x10
179 #define STMPE1600_REG_GPMR_MSB 0x11
180 #define STMPE1600_REG_GPSR_LSB 0x12
181 #define STMPE1600_REG_GPSR_MSB 0x13
182 #define STMPE1600_REG_GPDR_LSB 0x14
183 #define STMPE1600_REG_GPDR_MSB 0x15
184 #define STMPE1600_REG_GPPIR_LSB 0x16
185 #define STMPE1600_REG_GPPIR_MSB 0x17
188 * STMPE1601
191 #define STMPE1601_IRQ_GPIOC 8
192 #define STMPE1601_IRQ_PWM3 7
193 #define STMPE1601_IRQ_PWM2 6
194 #define STMPE1601_IRQ_PWM1 5
195 #define STMPE1601_IRQ_PWM0 4
196 #define STMPE1601_IRQ_KEYPAD_OVER 2
197 #define STMPE1601_IRQ_KEYPAD 1
198 #define STMPE1601_IRQ_WAKEUP 0
199 #define STMPE1601_NR_INTERNAL_IRQS 9
201 #define STMPE1601_REG_SYS_CTRL 0x02
202 #define STMPE1601_REG_SYS_CTRL2 0x03
203 #define STMPE1601_REG_ICR_MSB 0x10
204 #define STMPE1601_REG_ICR_LSB 0x11
205 #define STMPE1601_REG_IER_MSB 0x12
206 #define STMPE1601_REG_IER_LSB 0x13
207 #define STMPE1601_REG_ISR_MSB 0x14
208 #define STMPE1601_REG_ISR_LSB 0x15
209 #define STMPE1601_REG_INT_EN_GPIO_MASK_MSB 0x16
210 #define STMPE1601_REG_INT_EN_GPIO_MASK_LSB 0x17
211 #define STMPE1601_REG_INT_STA_GPIO_MSB 0x18
212 #define STMPE1601_REG_INT_STA_GPIO_LSB 0x19
213 #define STMPE1601_REG_CHIP_ID 0x80
214 #define STMPE1601_REG_GPIO_SET_MSB 0x82
215 #define STMPE1601_REG_GPIO_SET_LSB 0x83
216 #define STMPE1601_REG_GPIO_CLR_MSB 0x84
217 #define STMPE1601_REG_GPIO_CLR_LSB 0x85
218 #define STMPE1601_REG_GPIO_MP_MSB 0x86
219 #define STMPE1601_REG_GPIO_MP_LSB 0x87
220 #define STMPE1601_REG_GPIO_SET_DIR_MSB 0x88
221 #define STMPE1601_REG_GPIO_SET_DIR_LSB 0x89
222 #define STMPE1601_REG_GPIO_ED_MSB 0x8A
223 #define STMPE1601_REG_GPIO_ED_LSB 0x8B
224 #define STMPE1601_REG_GPIO_RE_MSB 0x8C
225 #define STMPE1601_REG_GPIO_RE_LSB 0x8D
226 #define STMPE1601_REG_GPIO_FE_MSB 0x8E
227 #define STMPE1601_REG_GPIO_FE_LSB 0x8F
228 #define STMPE1601_REG_GPIO_PU_MSB 0x90
229 #define STMPE1601_REG_GPIO_PU_LSB 0x91
230 #define STMPE1601_REG_GPIO_AF_U_MSB 0x92
232 #define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3)
233 #define STMPE1601_SYS_CTRL_ENABLE_KPC (1 << 1)
234 #define STMPE1601_SYS_CTRL_ENABLE_SPWM (1 << 0)
236 /* The 1601/2403 share the same masks */
237 #define STMPE1601_AUTOSLEEP_TIMEOUT_MASK (0x7)
238 #define STPME1601_AUTOSLEEP_ENABLE (1 << 3)
241 * STMPE1801
243 #define STMPE1801_ID 0xc110
244 #define STMPE1801_NR_INTERNAL_IRQS 5
245 #define STMPE1801_IRQ_KEYPAD_COMBI 4
246 #define STMPE1801_IRQ_GPIOC 3
247 #define STMPE1801_IRQ_KEYPAD_OVER 2
248 #define STMPE1801_IRQ_KEYPAD 1
249 #define STMPE1801_IRQ_WAKEUP 0
251 #define STMPE1801_REG_CHIP_ID 0x00
252 #define STMPE1801_REG_SYS_CTRL 0x02
253 #define STMPE1801_REG_INT_CTRL_LOW 0x04
254 #define STMPE1801_REG_INT_EN_MASK_LOW 0x06
255 #define STMPE1801_REG_INT_STA_LOW 0x08
256 #define STMPE1801_REG_INT_EN_GPIO_MASK_LOW 0x0A
257 #define STMPE1801_REG_INT_EN_GPIO_MASK_MID 0x0B
258 #define STMPE1801_REG_INT_EN_GPIO_MASK_HIGH 0x0C
259 #define STMPE1801_REG_INT_STA_GPIO_LOW 0x0D
260 #define STMPE1801_REG_INT_STA_GPIO_MID 0x0E
261 #define STMPE1801_REG_INT_STA_GPIO_HIGH 0x0F
262 #define STMPE1801_REG_GPIO_SET_LOW 0x10
263 #define STMPE1801_REG_GPIO_SET_MID 0x11
264 #define STMPE1801_REG_GPIO_SET_HIGH 0x12
265 #define STMPE1801_REG_GPIO_CLR_LOW 0x13
266 #define STMPE1801_REG_GPIO_CLR_MID 0x14
267 #define STMPE1801_REG_GPIO_CLR_HIGH 0x15
268 #define STMPE1801_REG_GPIO_MP_LOW 0x16
269 #define STMPE1801_REG_GPIO_MP_MID 0x17
270 #define STMPE1801_REG_GPIO_MP_HIGH 0x18
271 #define STMPE1801_REG_GPIO_SET_DIR_LOW 0x19
272 #define STMPE1801_REG_GPIO_SET_DIR_MID 0x1A
273 #define STMPE1801_REG_GPIO_SET_DIR_HIGH 0x1B
274 #define STMPE1801_REG_GPIO_RE_LOW 0x1C
275 #define STMPE1801_REG_GPIO_RE_MID 0x1D
276 #define STMPE1801_REG_GPIO_RE_HIGH 0x1E
277 #define STMPE1801_REG_GPIO_FE_LOW 0x1F
278 #define STMPE1801_REG_GPIO_FE_MID 0x20
279 #define STMPE1801_REG_GPIO_FE_HIGH 0x21
280 #define STMPE1801_REG_GPIO_PULL_UP_LOW 0x22
281 #define STMPE1801_REG_GPIO_PULL_UP_MID 0x23
282 #define STMPE1801_REG_GPIO_PULL_UP_HIGH 0x24
284 #define STMPE1801_MSK_INT_EN_KPC (1 << 1)
285 #define STMPE1801_MSK_INT_EN_GPIO (1 << 3)
288 * STMPE24xx
291 #define STMPE24XX_IRQ_GPIOC 8
292 #define STMPE24XX_IRQ_PWM2 7
293 #define STMPE24XX_IRQ_PWM1 6
294 #define STMPE24XX_IRQ_PWM0 5
295 #define STMPE24XX_IRQ_ROT_OVER 4
296 #define STMPE24XX_IRQ_ROT 3
297 #define STMPE24XX_IRQ_KEYPAD_OVER 2
298 #define STMPE24XX_IRQ_KEYPAD 1
299 #define STMPE24XX_IRQ_WAKEUP 0
300 #define STMPE24XX_NR_INTERNAL_IRQS 9
302 #define STMPE24XX_REG_SYS_CTRL 0x02
303 #define STMPE24XX_REG_SYS_CTRL2 0x03
304 #define STMPE24XX_REG_ICR_MSB 0x10
305 #define STMPE24XX_REG_ICR_LSB 0x11
306 #define STMPE24XX_REG_IER_MSB 0x12
307 #define STMPE24XX_REG_IER_LSB 0x13
308 #define STMPE24XX_REG_ISR_MSB 0x14
309 #define STMPE24XX_REG_ISR_LSB 0x15
310 #define STMPE24XX_REG_IEGPIOR_MSB 0x16
311 #define STMPE24XX_REG_IEGPIOR_CSB 0x17
312 #define STMPE24XX_REG_IEGPIOR_LSB 0x18
313 #define STMPE24XX_REG_ISGPIOR_MSB 0x19
314 #define STMPE24XX_REG_ISGPIOR_CSB 0x1A
315 #define STMPE24XX_REG_ISGPIOR_LSB 0x1B
316 #define STMPE24XX_REG_CHIP_ID 0x80
317 #define STMPE24XX_REG_GPSR_MSB 0x83
318 #define STMPE24XX_REG_GPSR_CSB 0x84
319 #define STMPE24XX_REG_GPSR_LSB 0x85
320 #define STMPE24XX_REG_GPCR_MSB 0x86
321 #define STMPE24XX_REG_GPCR_CSB 0x87
322 #define STMPE24XX_REG_GPCR_LSB 0x88
323 #define STMPE24XX_REG_GPDR_MSB 0x89
324 #define STMPE24XX_REG_GPDR_CSB 0x8A
325 #define STMPE24XX_REG_GPDR_LSB 0x8B
326 #define STMPE24XX_REG_GPEDR_MSB 0x8C
327 #define STMPE24XX_REG_GPEDR_CSB 0x8D
328 #define STMPE24XX_REG_GPEDR_LSB 0x8E
329 #define STMPE24XX_REG_GPRER_MSB 0x8F
330 #define STMPE24XX_REG_GPRER_CSB 0x90
331 #define STMPE24XX_REG_GPRER_LSB 0x91
332 #define STMPE24XX_REG_GPFER_MSB 0x92
333 #define STMPE24XX_REG_GPFER_CSB 0x93
334 #define STMPE24XX_REG_GPFER_LSB 0x94
335 #define STMPE24XX_REG_GPPUR_MSB 0x95
336 #define STMPE24XX_REG_GPPUR_CSB 0x96
337 #define STMPE24XX_REG_GPPUR_LSB 0x97
338 #define STMPE24XX_REG_GPPDR_MSB 0x98
339 #define STMPE24XX_REG_GPPDR_CSB 0x99
340 #define STMPE24XX_REG_GPPDR_LSB 0x9A
341 #define STMPE24XX_REG_GPAFR_U_MSB 0x9B
342 #define STMPE24XX_REG_GPMR_MSB 0xA2
343 #define STMPE24XX_REG_GPMR_CSB 0xA3
344 #define STMPE24XX_REG_GPMR_LSB 0xA4
345 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3)
346 #define STMPE24XX_SYSCON_ENABLE_PWM (1 << 2)
347 #define STMPE24XX_SYS_CTRL_ENABLE_KPC (1 << 1)
348 #define STMPE24XX_SYSCON_ENABLE_ROT (1 << 0)
350 #endif