arch/powerpc/platforms/85xx/mpc85xx_ads.c

   1 /*
   2  * MPC85xx setup and early boot code plus other random bits.
   3  *
   4  * Maintained by Kumar Gala (see MAINTAINERS for contact information)
   5  *
   6  * Copyright 2005 Freescale Semiconductor Inc.
   7  *
   8  * This program is free software; you can redistribute  it and/or modify it
   9  * under  the terms of  the GNU General  Public License as published by the
  10  * Free Software Foundation;  either version 2 of the  License, or (at your
  11  * option) any later version.
  12  */
  13
  14 #include <linux/stddef.h>
  15 #include <linux/kernel.h>
  16 #include <linux/pci.h>
  17 #include <linux/kdev_t.h>
  18 #include <linux/delay.h>
  19 #include <linux/seq_file.h>
  20 #include <linux/of_platform.h>
  21
  22 #include <asm/system.h>
  23 #include <asm/time.h>
  24 #include <asm/machdep.h>
  25 #include <asm/pci-bridge.h>
  26 #include <asm/mpic.h>
  27 #include <mm/mmu_decl.h>
  28 #include <asm/udbg.h>
  29
  30 #include <sysdev/fsl_soc.h>
  31 #include <sysdev/fsl_pci.h>
  32
  33 #ifdef CONFIG_CPM2
  34 #include <asm/cpm2.h>
  35 #include <sysdev/cpm2_pic.h>
  36 #endif
  37
  38 #ifdef CONFIG_PCI
  39 static int mpc85xx_exclude_device(struct pci_controller *hose,
  40                                    u_char bus, u_char devfn)
  41 {
  42         if (bus == 0 && PCI_SLOT(devfn) == 0)
  43                 return PCIBIOS_DEVICE_NOT_FOUND;
  44         else
  45                 return PCIBIOS_SUCCESSFUL;
  46 }
  47 #endif /* CONFIG_PCI */
  48
  49 #ifdef CONFIG_CPM2
  50
  51 static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
  52 {
  53         int cascade_irq;
  54
  55         while ((cascade_irq = cpm2_get_irq()) >= 0)
  56                 generic_handle_irq(cascade_irq);
  57
  58         desc->chip->eoi(irq);
  59 }
  60
  61 #endif /* CONFIG_CPM2 */
  62
  63 static void __init mpc85xx_ads_pic_init(void)
  64 {
  65         struct mpic *mpic;
  66         struct resource r;
  67         struct device_node *np = NULL;
  68 #ifdef CONFIG_CPM2
  69         int irq;
  70 #endif
  71
  72         np = of_find_node_by_type(np, "open-pic");
  73         if (!np) {
  74                 printk(KERN_ERR "Could not find open-pic node\n");
  75                 return;
  76         }
  77
  78         if (of_address_to_resource(np, 0, &r)) {
  79                 printk(KERN_ERR "Could not map mpic register space\n");
  80                 of_node_put(np);
  81                 return;
  82         }
  83
  84         mpic = mpic_alloc(np, r.start,
  85                         MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
  86                         0, 256, " OpenPIC  ");
  87         BUG_ON(mpic == NULL);
  88         of_node_put(np);
  89
  90         mpic_init(mpic);
  91
  92 #ifdef CONFIG_CPM2
  93         /* Setup CPM2 PIC */
  94         np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
  95         if (np == NULL) {
  96                 printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
  97                 return;
  98         }
  99         irq = irq_of_parse_and_map(np, 0);
 100
 101         cpm2_pic_init(np);
 102         of_node_put(np);
 103         set_irq_chained_handler(irq, cpm2_cascade);
 104 #endif
 105 }
 106
 107 /*
 108  * Setup the architecture
 109  */
 110 #ifdef CONFIG_CPM2
 111 struct cpm_pin {
 112         int port, pin, flags;
 113 };
 114
 115 static const struct cpm_pin mpc8560_ads_pins[] = {
 116         /* SCC1 */
 117         {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 118         {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
 119         {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 120
 121         /* SCC2 */
 122         {2, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 123         {2, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 124         {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 125         {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 126         {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 127
 128         /* FCC2 */
 129         {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 130         {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 131         {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 132         {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 133         {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 134         {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 135         {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 136         {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 137         {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 138         {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 139         {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 140         {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
 141         {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 142         {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 143         {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
 144         {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
 145
 146         /* FCC3 */
 147         {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 148         {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 149         {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 150         {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 151         {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 152         {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 153         {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 154         {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 155         {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 156         {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 157         {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 158         {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 159         {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 160         {2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK16 */
 161         {2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK15 */
 162         {2, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 163 };
 164
 165 static void __init init_ioports(void)
 166 {
 167         int i;
 168
 169         for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
 170                 const struct cpm_pin *pin = &mpc8560_ads_pins[i];
 171                 cpm2_set_pin(pin->port, pin->pin, pin->flags);
 172         }
 173
 174         cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
 175         cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
 176         cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
 177         cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
 178         cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
 179         cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
 180         cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
 181         cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
 182 }
 183 #endif
 184
 185 static void __init mpc85xx_ads_setup_arch(void)
 186 {
 187 #ifdef CONFIG_PCI
 188         struct device_node *np;
 189 #endif
 190
 191         if (ppc_md.progress)
 192                 ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
 193
 194 #ifdef CONFIG_CPM2
 195         cpm2_reset();
 196         init_ioports();
 197 #endif
 198
 199 #ifdef CONFIG_PCI
 200         for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
 201                 fsl_add_bridge(np, 1);
 202
 203         ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 204 #endif
 205 }
 206
 207 static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 208 {
 209         uint pvid, svid, phid1;
 210
 211         pvid = mfspr(SPRN_PVR);
 212         svid = mfspr(SPRN_SVR);
 213
 214         seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
 215         seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
 216         seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 217
 218         /* Display cpu Pll setting */
 219         phid1 = mfspr(SPRN_HID1);
 220         seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 221 }
 222
 223 static struct of_device_id __initdata of_bus_ids[] = {
 224         { .name = "soc", },
 225         { .type = "soc", },
 226         { .name = "cpm", },
 227         { .name = "localbus", },
 228         { .compatible = "simple-bus", },
 229         { .compatible = "gianfar", },
 230         {},
 231 };
 232
 233 static int __init declare_of_platform_devices(void)
 234 {
 235         of_platform_bus_probe(NULL, of_bus_ids, NULL);
 236
 237         return 0;
 238 }
 239 machine_device_initcall(mpc85xx_ads, declare_of_platform_devices);
 240
 241 /*
 242  * Called very early, device-tree isn't unflattened
 243  */
 244 static int __init mpc85xx_ads_probe(void)
 245 {
 246         unsigned long root = of_get_flat_dt_root();
 247
 248         return of_flat_dt_is_compatible(root, "MPC85xxADS");
 249 }
 250
 251 define_machine(mpc85xx_ads) {
 252         .name                   = "MPC85xx ADS",
 253         .probe                  = mpc85xx_ads_probe,
 254         .setup_arch             = mpc85xx_ads_setup_arch,
 255         .init_IRQ               = mpc85xx_ads_pic_init,
 256         .show_cpuinfo           = mpc85xx_ads_show_cpuinfo,
 257         .get_irq                = mpic_get_irq,
 258         .restart                = fsl_rstcr_restart,
 259         .calibrate_decr         = generic_calibrate_decr,
 260         .progress               = udbg_progress,
 261 };