f2fs: fix incorrect range->len in f2fs_trim_fs()
[linux/fpc-iii.git] / drivers / clocksource / mips-gic-timer.c
blob54f8a331b53a0735e21e6befb4c894dae8f76f97
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
7 */
9 #define pr_fmt(fmt) "mips-gic-timer: " fmt
11 #include <linux/clk.h>
12 #include <linux/clockchips.h>
13 #include <linux/cpu.h>
14 #include <linux/init.h>
15 #include <linux/interrupt.h>
16 #include <linux/notifier.h>
17 #include <linux/of_irq.h>
18 #include <linux/percpu.h>
19 #include <linux/smp.h>
20 #include <linux/time.h>
21 #include <asm/mips-cps.h>
23 static DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device);
24 static int gic_timer_irq;
25 static unsigned int gic_frequency;
27 static u64 notrace gic_read_count(void)
29 unsigned int hi, hi2, lo;
31 if (mips_cm_is64)
32 return read_gic_counter();
34 do {
35 hi = read_gic_counter_32h();
36 lo = read_gic_counter_32l();
37 hi2 = read_gic_counter_32h();
38 } while (hi2 != hi);
40 return (((u64) hi) << 32) + lo;
43 static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
45 int cpu = cpumask_first(evt->cpumask);
46 u64 cnt;
47 int res;
49 cnt = gic_read_count();
50 cnt += (u64)delta;
51 if (cpu == raw_smp_processor_id()) {
52 write_gic_vl_compare(cnt);
53 } else {
54 write_gic_vl_other(mips_cm_vp_id(cpu));
55 write_gic_vo_compare(cnt);
57 res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0;
58 return res;
61 static irqreturn_t gic_compare_interrupt(int irq, void *dev_id)
63 struct clock_event_device *cd = dev_id;
65 write_gic_vl_compare(read_gic_vl_compare());
66 cd->event_handler(cd);
67 return IRQ_HANDLED;
70 struct irqaction gic_compare_irqaction = {
71 .handler = gic_compare_interrupt,
72 .percpu_dev_id = &gic_clockevent_device,
73 .flags = IRQF_PERCPU | IRQF_TIMER,
74 .name = "timer",
77 static void gic_clockevent_cpu_init(unsigned int cpu,
78 struct clock_event_device *cd)
80 cd->name = "MIPS GIC";
81 cd->features = CLOCK_EVT_FEAT_ONESHOT |
82 CLOCK_EVT_FEAT_C3STOP;
84 cd->rating = 350;
85 cd->irq = gic_timer_irq;
86 cd->cpumask = cpumask_of(cpu);
87 cd->set_next_event = gic_next_event;
89 clockevents_config_and_register(cd, gic_frequency, 0x300, 0x7fffffff);
91 enable_percpu_irq(gic_timer_irq, IRQ_TYPE_NONE);
94 static void gic_clockevent_cpu_exit(struct clock_event_device *cd)
96 disable_percpu_irq(gic_timer_irq);
99 static void gic_update_frequency(void *data)
101 unsigned long rate = (unsigned long)data;
103 clockevents_update_freq(this_cpu_ptr(&gic_clockevent_device), rate);
106 static int gic_starting_cpu(unsigned int cpu)
108 gic_clockevent_cpu_init(cpu, this_cpu_ptr(&gic_clockevent_device));
109 return 0;
112 static int gic_clk_notifier(struct notifier_block *nb, unsigned long action,
113 void *data)
115 struct clk_notifier_data *cnd = data;
117 if (action == POST_RATE_CHANGE)
118 on_each_cpu(gic_update_frequency, (void *)cnd->new_rate, 1);
120 return NOTIFY_OK;
123 static int gic_dying_cpu(unsigned int cpu)
125 gic_clockevent_cpu_exit(this_cpu_ptr(&gic_clockevent_device));
126 return 0;
129 static struct notifier_block gic_clk_nb = {
130 .notifier_call = gic_clk_notifier,
133 static int gic_clockevent_init(void)
135 int ret;
137 if (!gic_frequency)
138 return -ENXIO;
140 ret = setup_percpu_irq(gic_timer_irq, &gic_compare_irqaction);
141 if (ret < 0) {
142 pr_err("IRQ %d setup failed (%d)\n", gic_timer_irq, ret);
143 return ret;
146 cpuhp_setup_state(CPUHP_AP_MIPS_GIC_TIMER_STARTING,
147 "clockevents/mips/gic/timer:starting",
148 gic_starting_cpu, gic_dying_cpu);
149 return 0;
152 static u64 gic_hpt_read(struct clocksource *cs)
154 return gic_read_count();
157 static struct clocksource gic_clocksource = {
158 .name = "GIC",
159 .read = gic_hpt_read,
160 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
161 .archdata = { .vdso_clock_mode = VDSO_CLOCK_GIC },
164 static int __init __gic_clocksource_init(void)
166 unsigned int count_width;
167 int ret;
169 /* Set clocksource mask. */
170 count_width = read_gic_config() & GIC_CONFIG_COUNTBITS;
171 count_width >>= __ffs(GIC_CONFIG_COUNTBITS);
172 count_width *= 4;
173 count_width += 32;
174 gic_clocksource.mask = CLOCKSOURCE_MASK(count_width);
176 /* Calculate a somewhat reasonable rating value. */
177 gic_clocksource.rating = 200 + gic_frequency / 10000000;
179 ret = clocksource_register_hz(&gic_clocksource, gic_frequency);
180 if (ret < 0)
181 pr_warn("Unable to register clocksource\n");
183 return ret;
186 static int __init gic_clocksource_of_init(struct device_node *node)
188 struct clk *clk;
189 int ret;
191 if (!mips_gic_present() || !node->parent ||
192 !of_device_is_compatible(node->parent, "mti,gic")) {
193 pr_warn("No DT definition\n");
194 return -ENXIO;
197 clk = of_clk_get(node, 0);
198 if (!IS_ERR(clk)) {
199 ret = clk_prepare_enable(clk);
200 if (ret < 0) {
201 pr_err("Failed to enable clock\n");
202 clk_put(clk);
203 return ret;
206 gic_frequency = clk_get_rate(clk);
207 } else if (of_property_read_u32(node, "clock-frequency",
208 &gic_frequency)) {
209 pr_err("Frequency not specified\n");
210 return -EINVAL;
212 gic_timer_irq = irq_of_parse_and_map(node, 0);
213 if (!gic_timer_irq) {
214 pr_err("IRQ not specified\n");
215 return -EINVAL;
218 ret = __gic_clocksource_init();
219 if (ret)
220 return ret;
222 ret = gic_clockevent_init();
223 if (!ret && !IS_ERR(clk)) {
224 if (clk_notifier_register(clk, &gic_clk_nb) < 0)
225 pr_warn("Unable to register clock notifier\n");
228 /* And finally start the counter */
229 clear_gic_config(GIC_CONFIG_COUNTSTOP);
231 return 0;
233 TIMER_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
234 gic_clocksource_of_init);