gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / clocksource / asm9260_timer.c
blob5b39d3701fa3c91825c8fd4bf6f405f1bc771125
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
4 */
6 #include <linux/kernel.h>
7 #include <linux/init.h>
8 #include <linux/interrupt.h>
9 #include <linux/sched.h>
10 #include <linux/clk.h>
11 #include <linux/clocksource.h>
12 #include <linux/clockchips.h>
13 #include <linux/io.h>
14 #include <linux/of.h>
15 #include <linux/of_address.h>
16 #include <linux/of_irq.h>
17 #include <linux/bitops.h>
19 #define DRIVER_NAME "asm9260-timer"
22 * this device provide 4 offsets for each register:
23 * 0x0 - plain read write mode
24 * 0x4 - set mode, OR logic.
25 * 0x8 - clr mode, XOR logic.
26 * 0xc - togle mode.
28 #define SET_REG 4
29 #define CLR_REG 8
31 #define HW_IR 0x0000 /* RW. Interrupt */
32 #define BM_IR_CR0 BIT(4)
33 #define BM_IR_MR3 BIT(3)
34 #define BM_IR_MR2 BIT(2)
35 #define BM_IR_MR1 BIT(1)
36 #define BM_IR_MR0 BIT(0)
38 #define HW_TCR 0x0010 /* RW. Timer controller */
39 /* BM_C*_RST
40 * Timer Counter and the Prescale Counter are synchronously reset on the
41 * next positive edge of PCLK. The counters remain reset until TCR[1] is
42 * returned to zero. */
43 #define BM_C3_RST BIT(7)
44 #define BM_C2_RST BIT(6)
45 #define BM_C1_RST BIT(5)
46 #define BM_C0_RST BIT(4)
47 /* BM_C*_EN
48 * 1 - Timer Counter and Prescale Counter are enabled for counting
49 * 0 - counters are disabled */
50 #define BM_C3_EN BIT(3)
51 #define BM_C2_EN BIT(2)
52 #define BM_C1_EN BIT(1)
53 #define BM_C0_EN BIT(0)
55 #define HW_DIR 0x0020 /* RW. Direction? */
56 /* 00 - count up
57 * 01 - count down
58 * 10 - ?? 2^n/2 */
59 #define BM_DIR_COUNT_UP 0
60 #define BM_DIR_COUNT_DOWN 1
61 #define BM_DIR0_SHIFT 0
62 #define BM_DIR1_SHIFT 4
63 #define BM_DIR2_SHIFT 8
64 #define BM_DIR3_SHIFT 12
65 #define BM_DIR_DEFAULT (BM_DIR_COUNT_UP << BM_DIR0_SHIFT | \
66 BM_DIR_COUNT_UP << BM_DIR1_SHIFT | \
67 BM_DIR_COUNT_UP << BM_DIR2_SHIFT | \
68 BM_DIR_COUNT_UP << BM_DIR3_SHIFT)
70 #define HW_TC0 0x0030 /* RO. Timer counter 0 */
71 /* HW_TC*. Timer counter owerflow (0xffff.ffff to 0x0000.0000) do not generate
72 * interrupt. This registers can be used to detect overflow */
73 #define HW_TC1 0x0040
74 #define HW_TC2 0x0050
75 #define HW_TC3 0x0060
77 #define HW_PR 0x0070 /* RW. prescaler */
78 #define BM_PR_DISABLE 0
79 #define HW_PC 0x0080 /* RO. Prescaler counter */
80 #define HW_MCR 0x0090 /* RW. Match control */
81 /* enable interrupt on match */
82 #define BM_MCR_INT_EN(n) (1 << (n * 3 + 0))
83 /* enable TC reset on match */
84 #define BM_MCR_RES_EN(n) (1 << (n * 3 + 1))
85 /* enable stop TC on match */
86 #define BM_MCR_STOP_EN(n) (1 << (n * 3 + 2))
88 #define HW_MR0 0x00a0 /* RW. Match reg */
89 #define HW_MR1 0x00b0
90 #define HW_MR2 0x00C0
91 #define HW_MR3 0x00D0
93 #define HW_CTCR 0x0180 /* Counter control */
94 #define BM_CTCR0_SHIFT 0
95 #define BM_CTCR1_SHIFT 2
96 #define BM_CTCR2_SHIFT 4
97 #define BM_CTCR3_SHIFT 6
98 #define BM_CTCR_TM 0 /* Timer mode. Every rising PCLK edge. */
99 #define BM_CTCR_DEFAULT (BM_CTCR_TM << BM_CTCR0_SHIFT | \
100 BM_CTCR_TM << BM_CTCR1_SHIFT | \
101 BM_CTCR_TM << BM_CTCR2_SHIFT | \
102 BM_CTCR_TM << BM_CTCR3_SHIFT)
104 static struct asm9260_timer_priv {
105 void __iomem *base;
106 unsigned long ticks_per_jiffy;
107 } priv;
109 static int asm9260_timer_set_next_event(unsigned long delta,
110 struct clock_event_device *evt)
112 /* configure match count for TC0 */
113 writel_relaxed(delta, priv.base + HW_MR0);
114 /* enable TC0 */
115 writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
116 return 0;
119 static inline void __asm9260_timer_shutdown(struct clock_event_device *evt)
121 /* stop timer0 */
122 writel_relaxed(BM_C0_EN, priv.base + HW_TCR + CLR_REG);
125 static int asm9260_timer_shutdown(struct clock_event_device *evt)
127 __asm9260_timer_shutdown(evt);
128 return 0;
131 static int asm9260_timer_set_oneshot(struct clock_event_device *evt)
133 __asm9260_timer_shutdown(evt);
135 /* enable reset and stop on match */
136 writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
137 priv.base + HW_MCR + SET_REG);
138 return 0;
141 static int asm9260_timer_set_periodic(struct clock_event_device *evt)
143 __asm9260_timer_shutdown(evt);
145 /* disable reset and stop on match */
146 writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
147 priv.base + HW_MCR + CLR_REG);
148 /* configure match count for TC0 */
149 writel_relaxed(priv.ticks_per_jiffy, priv.base + HW_MR0);
150 /* enable TC0 */
151 writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
152 return 0;
155 static struct clock_event_device event_dev = {
156 .name = DRIVER_NAME,
157 .rating = 200,
158 .features = CLOCK_EVT_FEAT_PERIODIC |
159 CLOCK_EVT_FEAT_ONESHOT,
160 .set_next_event = asm9260_timer_set_next_event,
161 .set_state_shutdown = asm9260_timer_shutdown,
162 .set_state_periodic = asm9260_timer_set_periodic,
163 .set_state_oneshot = asm9260_timer_set_oneshot,
164 .tick_resume = asm9260_timer_shutdown,
167 static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
169 struct clock_event_device *evt = dev_id;
171 evt->event_handler(evt);
173 writel_relaxed(BM_IR_MR0, priv.base + HW_IR);
175 return IRQ_HANDLED;
179 * ---------------------------------------------------------------------------
180 * Timer initialization
181 * ---------------------------------------------------------------------------
183 static int __init asm9260_timer_init(struct device_node *np)
185 int irq;
186 struct clk *clk;
187 int ret;
188 unsigned long rate;
190 priv.base = of_io_request_and_map(np, 0, np->name);
191 if (IS_ERR(priv.base)) {
192 pr_err("%pOFn: unable to map resource\n", np);
193 return PTR_ERR(priv.base);
196 clk = of_clk_get(np, 0);
197 if (IS_ERR(clk)) {
198 pr_err("Failed to get clk!\n");
199 return PTR_ERR(clk);
202 ret = clk_prepare_enable(clk);
203 if (ret) {
204 pr_err("Failed to enable clk!\n");
205 return ret;
208 irq = irq_of_parse_and_map(np, 0);
209 ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
210 DRIVER_NAME, &event_dev);
211 if (ret) {
212 pr_err("Failed to setup irq!\n");
213 return ret;
216 /* set all timers for count-up */
217 writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
218 /* disable divider */
219 writel_relaxed(BM_PR_DISABLE, priv.base + HW_PR);
220 /* make sure all timers use every rising PCLK edge. */
221 writel_relaxed(BM_CTCR_DEFAULT, priv.base + HW_CTCR);
222 /* enable interrupt for TC0 and clean setting for all other lines */
223 writel_relaxed(BM_MCR_INT_EN(0) , priv.base + HW_MCR);
225 rate = clk_get_rate(clk);
226 clocksource_mmio_init(priv.base + HW_TC1, DRIVER_NAME, rate,
227 200, 32, clocksource_mmio_readl_up);
229 /* Seems like we can't use counter without match register even if
230 * actions for MR are disabled. So, set MR to max value. */
231 writel_relaxed(0xffffffff, priv.base + HW_MR1);
232 /* enable TC1 */
233 writel_relaxed(BM_C1_EN, priv.base + HW_TCR + SET_REG);
235 priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
236 event_dev.cpumask = cpumask_of(0);
237 clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
239 return 0;
241 TIMER_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
242 asm9260_timer_init);