gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / irqchip / irq-mxs.c
bloba671938fd97f6fd25cb2055db3ee52d44c64a3cd
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
4 * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
5 * Add Alphascale ASM9260 support.
6 */
8 #include <linux/kernel.h>
9 #include <linux/init.h>
10 #include <linux/irq.h>
11 #include <linux/irqchip.h>
12 #include <linux/irqdomain.h>
13 #include <linux/io.h>
14 #include <linux/of.h>
15 #include <linux/of_address.h>
16 #include <linux/of_irq.h>
17 #include <linux/stmp_device.h>
18 #include <asm/exception.h>
20 #include "alphascale_asm9260-icoll.h"
23 * this device provide 4 offsets for each register:
24 * 0x0 - plain read write mode
25 * 0x4 - set mode, OR logic.
26 * 0x8 - clr mode, XOR logic.
27 * 0xc - togle mode.
29 #define SET_REG 4
30 #define CLR_REG 8
32 #define HW_ICOLL_VECTOR 0x0000
33 #define HW_ICOLL_LEVELACK 0x0010
34 #define HW_ICOLL_CTRL 0x0020
35 #define HW_ICOLL_STAT_OFFSET 0x0070
36 #define HW_ICOLL_INTERRUPT0 0x0120
37 #define HW_ICOLL_INTERRUPTn(n) ((n) * 0x10)
38 #define BM_ICOLL_INTR_ENABLE BIT(2)
39 #define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1
41 #define ICOLL_NUM_IRQS 128
43 enum icoll_type {
44 ICOLL,
45 ASM9260_ICOLL,
48 struct icoll_priv {
49 void __iomem *vector;
50 void __iomem *levelack;
51 void __iomem *ctrl;
52 void __iomem *stat;
53 void __iomem *intr;
54 void __iomem *clear;
55 enum icoll_type type;
58 static struct icoll_priv icoll_priv;
59 static struct irq_domain *icoll_domain;
61 /* calculate bit offset depending on number of intterupt per register */
62 static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
65 * mask lower part of hwirq to convert it
66 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
68 return bit << ((d->hwirq & 3) << 3);
71 /* calculate mem offset depending on number of intterupt per register */
72 static void __iomem *icoll_intr_reg(struct irq_data *d)
74 /* offset = hwirq / intr_per_reg * 0x10 */
75 return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
78 static void icoll_ack_irq(struct irq_data *d)
81 * The Interrupt Collector is able to prioritize irqs.
82 * Currently only level 0 is used. So acking can use
83 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
85 __raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
86 icoll_priv.levelack);
89 static void icoll_mask_irq(struct irq_data *d)
91 __raw_writel(BM_ICOLL_INTR_ENABLE,
92 icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
95 static void icoll_unmask_irq(struct irq_data *d)
97 __raw_writel(BM_ICOLL_INTR_ENABLE,
98 icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
101 static void asm9260_mask_irq(struct irq_data *d)
103 __raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
104 icoll_intr_reg(d) + CLR_REG);
107 static void asm9260_unmask_irq(struct irq_data *d)
109 __raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
110 icoll_priv.clear +
111 ASM9260_HW_ICOLL_CLEARn(d->hwirq));
113 __raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
114 icoll_intr_reg(d) + SET_REG);
117 static struct irq_chip mxs_icoll_chip = {
118 .irq_ack = icoll_ack_irq,
119 .irq_mask = icoll_mask_irq,
120 .irq_unmask = icoll_unmask_irq,
121 .flags = IRQCHIP_MASK_ON_SUSPEND |
122 IRQCHIP_SKIP_SET_WAKE,
125 static struct irq_chip asm9260_icoll_chip = {
126 .irq_ack = icoll_ack_irq,
127 .irq_mask = asm9260_mask_irq,
128 .irq_unmask = asm9260_unmask_irq,
129 .flags = IRQCHIP_MASK_ON_SUSPEND |
130 IRQCHIP_SKIP_SET_WAKE,
133 asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
135 u32 irqnr;
137 irqnr = __raw_readl(icoll_priv.stat);
138 __raw_writel(irqnr, icoll_priv.vector);
139 handle_domain_irq(icoll_domain, irqnr, regs);
142 static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
143 irq_hw_number_t hw)
145 struct irq_chip *chip;
147 if (icoll_priv.type == ICOLL)
148 chip = &mxs_icoll_chip;
149 else
150 chip = &asm9260_icoll_chip;
152 irq_set_chip_and_handler(virq, chip, handle_level_irq);
154 return 0;
157 static const struct irq_domain_ops icoll_irq_domain_ops = {
158 .map = icoll_irq_domain_map,
159 .xlate = irq_domain_xlate_onecell,
162 static void __init icoll_add_domain(struct device_node *np,
163 int num)
165 icoll_domain = irq_domain_add_linear(np, num,
166 &icoll_irq_domain_ops, NULL);
168 if (!icoll_domain)
169 panic("%pOF: unable to create irq domain", np);
172 static void __iomem * __init icoll_init_iobase(struct device_node *np)
174 void __iomem *icoll_base;
176 icoll_base = of_io_request_and_map(np, 0, np->name);
177 if (IS_ERR(icoll_base))
178 panic("%pOF: unable to map resource", np);
179 return icoll_base;
182 static int __init icoll_of_init(struct device_node *np,
183 struct device_node *interrupt_parent)
185 void __iomem *icoll_base;
187 icoll_priv.type = ICOLL;
189 icoll_base = icoll_init_iobase(np);
190 icoll_priv.vector = icoll_base + HW_ICOLL_VECTOR;
191 icoll_priv.levelack = icoll_base + HW_ICOLL_LEVELACK;
192 icoll_priv.ctrl = icoll_base + HW_ICOLL_CTRL;
193 icoll_priv.stat = icoll_base + HW_ICOLL_STAT_OFFSET;
194 icoll_priv.intr = icoll_base + HW_ICOLL_INTERRUPT0;
195 icoll_priv.clear = NULL;
198 * Interrupt Collector reset, which initializes the priority
199 * for each irq to level 0.
201 stmp_reset_block(icoll_priv.ctrl);
203 icoll_add_domain(np, ICOLL_NUM_IRQS);
205 return 0;
207 IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
209 static int __init asm9260_of_init(struct device_node *np,
210 struct device_node *interrupt_parent)
212 void __iomem *icoll_base;
213 int i;
215 icoll_priv.type = ASM9260_ICOLL;
217 icoll_base = icoll_init_iobase(np);
218 icoll_priv.vector = icoll_base + ASM9260_HW_ICOLL_VECTOR;
219 icoll_priv.levelack = icoll_base + ASM9260_HW_ICOLL_LEVELACK;
220 icoll_priv.ctrl = icoll_base + ASM9260_HW_ICOLL_CTRL;
221 icoll_priv.stat = icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
222 icoll_priv.intr = icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
223 icoll_priv.clear = icoll_base + ASM9260_HW_ICOLL_CLEAR0;
225 writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
226 icoll_priv.ctrl);
228 * ASM9260 don't provide reset bit. So, we need to set level 0
229 * manually.
231 for (i = 0; i < 16 * 0x10; i += 0x10)
232 writel(0, icoll_priv.intr + i);
234 icoll_add_domain(np, ASM9260_NUM_IRQS);
235 set_handle_irq(icoll_handle_irq);
237 return 0;
239 IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);