gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / media / radio / saa7706h.c
blobadb66f869dd28e98a04e0d5652701a9080299ccf
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * saa7706.c Philips SAA7706H Car Radio DSP driver
4 * Copyright (c) 2009 Intel Corporation
5 */
7 #include <linux/module.h>
8 #include <linux/init.h>
9 #include <linux/delay.h>
10 #include <linux/errno.h>
11 #include <linux/kernel.h>
12 #include <linux/interrupt.h>
13 #include <linux/i2c.h>
14 #include <linux/slab.h>
15 #include <media/v4l2-device.h>
16 #include <media/v4l2-ctrls.h>
18 #define DRIVER_NAME "saa7706h"
20 /* the I2C memory map looks like this
22 $1C00 - $FFFF Not Used
23 $2200 - $3FFF Reserved YRAM (DSP2) space
24 $2000 - $21FF YRAM (DSP2)
25 $1FF0 - $1FFF Hardware Registers
26 $1280 - $1FEF Reserved XRAM (DSP2) space
27 $1000 - $127F XRAM (DSP2)
28 $0FFF DSP CONTROL
29 $0A00 - $0FFE Reserved
30 $0980 - $09FF Reserved YRAM (DSP1) space
31 $0800 - $097F YRAM (DSP1)
32 $0200 - $07FF Not Used
33 $0180 - $01FF Reserved XRAM (DSP1) space
34 $0000 - $017F XRAM (DSP1)
37 #define SAA7706H_REG_CTRL 0x0fff
38 #define SAA7706H_CTRL_BYP_PLL 0x0001
39 #define SAA7706H_CTRL_PLL_DIV_MASK 0x003e
40 #define SAA7706H_CTRL_PLL3_62975MHZ 0x003e
41 #define SAA7706H_CTRL_DSP_TURBO 0x0040
42 #define SAA7706H_CTRL_PC_RESET_DSP1 0x0080
43 #define SAA7706H_CTRL_PC_RESET_DSP2 0x0100
44 #define SAA7706H_CTRL_DSP1_ROM_EN_MASK 0x0600
45 #define SAA7706H_CTRL_DSP1_FUNC_PROM 0x0000
46 #define SAA7706H_CTRL_DSP2_ROM_EN_MASK 0x1800
47 #define SAA7706H_CTRL_DSP2_FUNC_PROM 0x0000
48 #define SAA7706H_CTRL_DIG_SIL_INTERPOL 0x8000
50 #define SAA7706H_REG_EVALUATION 0x1ff0
51 #define SAA7706H_EVAL_DISABLE_CHARGE_PUMP 0x000001
52 #define SAA7706H_EVAL_DCS_CLOCK 0x000002
53 #define SAA7706H_EVAL_GNDRC1_ENABLE 0x000004
54 #define SAA7706H_EVAL_GNDRC2_ENABLE 0x000008
56 #define SAA7706H_REG_CL_GEN1 0x1ff3
57 #define SAA7706H_CL_GEN1_MIN_LOOPGAIN_MASK 0x00000f
58 #define SAA7706H_CL_GEN1_LOOPGAIN_MASK 0x0000f0
59 #define SAA7706H_CL_GEN1_COARSE_RATION 0xffff00
61 #define SAA7706H_REG_CL_GEN2 0x1ff4
62 #define SAA7706H_CL_GEN2_WSEDGE_FALLING 0x000001
63 #define SAA7706H_CL_GEN2_STOP_VCO 0x000002
64 #define SAA7706H_CL_GEN2_FRERUN 0x000004
65 #define SAA7706H_CL_GEN2_ADAPTIVE 0x000008
66 #define SAA7706H_CL_GEN2_FINE_RATIO_MASK 0x0ffff0
68 #define SAA7706H_REG_CL_GEN4 0x1ff6
69 #define SAA7706H_CL_GEN4_BYPASS_PLL1 0x001000
70 #define SAA7706H_CL_GEN4_PLL1_DIV_MASK 0x03e000
71 #define SAA7706H_CL_GEN4_DSP1_TURBO 0x040000
73 #define SAA7706H_REG_SEL 0x1ff7
74 #define SAA7706H_SEL_DSP2_SRCA_MASK 0x000007
75 #define SAA7706H_SEL_DSP2_FMTA_MASK 0x000031
76 #define SAA7706H_SEL_DSP2_SRCB_MASK 0x0001c0
77 #define SAA7706H_SEL_DSP2_FMTB_MASK 0x000e00
78 #define SAA7706H_SEL_DSP1_SRC_MASK 0x003000
79 #define SAA7706H_SEL_DSP1_FMT_MASK 0x01c003
80 #define SAA7706H_SEL_SPDIF2 0x020000
81 #define SAA7706H_SEL_HOST_IO_FMT_MASK 0x1c0000
82 #define SAA7706H_SEL_EN_HOST_IO 0x200000
84 #define SAA7706H_REG_IAC 0x1ff8
85 #define SAA7706H_REG_CLK_SET 0x1ff9
86 #define SAA7706H_REG_CLK_COEFF 0x1ffa
87 #define SAA7706H_REG_INPUT_SENS 0x1ffb
88 #define SAA7706H_INPUT_SENS_RDS_VOL_MASK 0x0003f
89 #define SAA7706H_INPUT_SENS_FM_VOL_MASK 0x00fc0
90 #define SAA7706H_INPUT_SENS_FM_MPX 0x01000
91 #define SAA7706H_INPUT_SENS_OFF_FILTER_A_EN 0x02000
92 #define SAA7706H_INPUT_SENS_OFF_FILTER_B_EN 0x04000
93 #define SAA7706H_REG_PHONE_NAV_AUDIO 0x1ffc
94 #define SAA7706H_REG_IO_CONF_DSP2 0x1ffd
95 #define SAA7706H_REG_STATUS_DSP2 0x1ffe
96 #define SAA7706H_REG_PC_DSP2 0x1fff
98 #define SAA7706H_DSP1_MOD0 0x0800
99 #define SAA7706H_DSP1_ROM_VER 0x097f
100 #define SAA7706H_DSP2_MPTR0 0x1000
102 #define SAA7706H_DSP1_MODPNTR 0x0000
104 #define SAA7706H_DSP2_XMEM_CONTLLCW 0x113e
105 #define SAA7706H_DSP2_XMEM_BUSAMP 0x114a
106 #define SAA7706H_DSP2_XMEM_FDACPNTR 0x11f9
107 #define SAA7706H_DSP2_XMEM_IIS1PNTR 0x11fb
109 #define SAA7706H_DSP2_YMEM_PVGA 0x212a
110 #define SAA7706H_DSP2_YMEM_PVAT1 0x212b
111 #define SAA7706H_DSP2_YMEM_PVAT 0x212c
112 #define SAA7706H_DSP2_YMEM_ROM_VER 0x21ff
114 #define SUPPORTED_DSP1_ROM_VER 0x667
116 struct saa7706h_state {
117 struct v4l2_subdev sd;
118 struct v4l2_ctrl_handler hdl;
119 unsigned muted;
122 static inline struct saa7706h_state *to_state(struct v4l2_subdev *sd)
124 return container_of(sd, struct saa7706h_state, sd);
127 static int saa7706h_i2c_send(struct i2c_client *client, const u8 *data, int len)
129 int err = i2c_master_send(client, data, len);
130 if (err == len)
131 return 0;
132 return err > 0 ? -EIO : err;
135 static int saa7706h_i2c_transfer(struct i2c_client *client,
136 struct i2c_msg *msgs, int num)
138 int err = i2c_transfer(client->adapter, msgs, num);
139 if (err == num)
140 return 0;
141 return err > 0 ? -EIO : err;
144 static int saa7706h_set_reg24(struct v4l2_subdev *sd, u16 reg, u32 val)
146 struct i2c_client *client = v4l2_get_subdevdata(sd);
147 u8 buf[5];
148 int pos = 0;
150 buf[pos++] = reg >> 8;
151 buf[pos++] = reg;
152 buf[pos++] = val >> 16;
153 buf[pos++] = val >> 8;
154 buf[pos++] = val;
156 return saa7706h_i2c_send(client, buf, pos);
159 static int saa7706h_set_reg24_err(struct v4l2_subdev *sd, u16 reg, u32 val,
160 int *err)
162 return *err ? *err : saa7706h_set_reg24(sd, reg, val);
165 static int saa7706h_set_reg16(struct v4l2_subdev *sd, u16 reg, u16 val)
167 struct i2c_client *client = v4l2_get_subdevdata(sd);
168 u8 buf[4];
169 int pos = 0;
171 buf[pos++] = reg >> 8;
172 buf[pos++] = reg;
173 buf[pos++] = val >> 8;
174 buf[pos++] = val;
176 return saa7706h_i2c_send(client, buf, pos);
179 static int saa7706h_set_reg16_err(struct v4l2_subdev *sd, u16 reg, u16 val,
180 int *err)
182 return *err ? *err : saa7706h_set_reg16(sd, reg, val);
185 static int saa7706h_get_reg16(struct v4l2_subdev *sd, u16 reg)
187 struct i2c_client *client = v4l2_get_subdevdata(sd);
188 u8 buf[2];
189 int err;
190 u8 regaddr[] = {reg >> 8, reg};
191 struct i2c_msg msg[] = {
193 .addr = client->addr,
194 .len = sizeof(regaddr),
195 .buf = regaddr
198 .addr = client->addr,
199 .flags = I2C_M_RD,
200 .len = sizeof(buf),
201 .buf = buf
205 err = saa7706h_i2c_transfer(client, msg, ARRAY_SIZE(msg));
206 if (err)
207 return err;
209 return buf[0] << 8 | buf[1];
212 static int saa7706h_unmute(struct v4l2_subdev *sd)
214 struct saa7706h_state *state = to_state(sd);
215 int err = 0;
217 err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
218 SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
219 SAA7706H_CTRL_PC_RESET_DSP2, &err);
221 /* newer versions of the chip requires a small sleep after reset */
222 msleep(1);
224 err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
225 SAA7706H_CTRL_PLL3_62975MHZ, &err);
227 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_EVALUATION, 0, &err);
229 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN1, 0x040022, &err);
231 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN2,
232 SAA7706H_CL_GEN2_WSEDGE_FALLING, &err);
234 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN4, 0x024080, &err);
236 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_SEL, 0x200080, &err);
238 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IAC, 0xf4caed, &err);
240 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_SET, 0x124334, &err);
242 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_COEFF, 0x004a1a,
243 &err);
245 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_INPUT_SENS, 0x0071c7,
246 &err);
248 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PHONE_NAV_AUDIO,
249 0x0e22ff, &err);
251 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IO_CONF_DSP2, 0x001ff8,
252 &err);
254 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_STATUS_DSP2, 0x080003,
255 &err);
257 err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PC_DSP2, 0x000004, &err);
259 err = saa7706h_set_reg16_err(sd, SAA7706H_DSP1_MOD0, 0x0c6c, &err);
261 err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_MPTR0, 0x000b4b, &err);
263 err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x000600, &err);
265 err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x0000c0, &err);
267 err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000819,
268 &err);
270 err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x00085a,
271 &err);
273 err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_BUSAMP, 0x7fffff,
274 &err);
276 err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_FDACPNTR, 0x2000cb,
277 &err);
279 err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_IIS1PNTR, 0x2000cb,
280 &err);
282 err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVGA, 0x0f80, &err);
284 err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT1, 0x0800,
285 &err);
287 err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT, 0x0800, &err);
289 err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000905,
290 &err);
291 if (!err)
292 state->muted = 0;
293 return err;
296 static int saa7706h_mute(struct v4l2_subdev *sd)
298 struct saa7706h_state *state = to_state(sd);
299 int err;
301 err = saa7706h_set_reg16(sd, SAA7706H_REG_CTRL,
302 SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
303 SAA7706H_CTRL_PC_RESET_DSP2);
304 if (!err)
305 state->muted = 1;
306 return err;
309 static int saa7706h_s_ctrl(struct v4l2_ctrl *ctrl)
311 struct saa7706h_state *state =
312 container_of(ctrl->handler, struct saa7706h_state, hdl);
314 switch (ctrl->id) {
315 case V4L2_CID_AUDIO_MUTE:
316 if (ctrl->val)
317 return saa7706h_mute(&state->sd);
318 return saa7706h_unmute(&state->sd);
320 return -EINVAL;
323 static const struct v4l2_ctrl_ops saa7706h_ctrl_ops = {
324 .s_ctrl = saa7706h_s_ctrl,
327 static const struct v4l2_subdev_ops empty_ops = {};
330 * Generic i2c probe
331 * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
334 static int saa7706h_probe(struct i2c_client *client,
335 const struct i2c_device_id *id)
337 struct saa7706h_state *state;
338 struct v4l2_subdev *sd;
339 int err;
341 /* Check if the adapter supports the needed features */
342 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
343 return -EIO;
345 v4l_info(client, "chip found @ 0x%02x (%s)\n",
346 client->addr << 1, client->adapter->name);
348 state = kzalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
349 if (state == NULL)
350 return -ENOMEM;
351 sd = &state->sd;
352 v4l2_i2c_subdev_init(sd, client, &empty_ops);
354 v4l2_ctrl_handler_init(&state->hdl, 4);
355 v4l2_ctrl_new_std(&state->hdl, &saa7706h_ctrl_ops,
356 V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
357 sd->ctrl_handler = &state->hdl;
358 err = state->hdl.error;
359 if (err)
360 goto err;
362 /* check the rom versions */
363 err = saa7706h_get_reg16(sd, SAA7706H_DSP1_ROM_VER);
364 if (err < 0)
365 goto err;
366 if (err != SUPPORTED_DSP1_ROM_VER)
367 v4l2_warn(sd, "Unknown DSP1 ROM code version: 0x%x\n", err);
368 state->muted = 1;
370 /* startup in a muted state */
371 err = saa7706h_mute(sd);
372 if (err)
373 goto err;
375 return 0;
377 err:
378 v4l2_device_unregister_subdev(sd);
379 v4l2_ctrl_handler_free(&state->hdl);
380 kfree(to_state(sd));
382 printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err);
384 return err;
387 static int saa7706h_remove(struct i2c_client *client)
389 struct v4l2_subdev *sd = i2c_get_clientdata(client);
390 struct saa7706h_state *state = to_state(sd);
392 saa7706h_mute(sd);
393 v4l2_device_unregister_subdev(sd);
394 v4l2_ctrl_handler_free(&state->hdl);
395 kfree(to_state(sd));
396 return 0;
399 static const struct i2c_device_id saa7706h_id[] = {
400 {DRIVER_NAME, 0},
404 MODULE_DEVICE_TABLE(i2c, saa7706h_id);
406 static struct i2c_driver saa7706h_driver = {
407 .driver = {
408 .name = DRIVER_NAME,
410 .probe = saa7706h_probe,
411 .remove = saa7706h_remove,
412 .id_table = saa7706h_id,
415 module_i2c_driver(saa7706h_driver);
417 MODULE_DESCRIPTION("SAA7706H Car Radio DSP driver");
418 MODULE_AUTHOR("Mocean Laboratories");
419 MODULE_LICENSE("GPL v2");