drivers/net/ethernet/atheros/atl1e/atl1e_hw.h

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  * Copyright(c) 2007 Atheros Corporation. All rights reserved.
   4  *
   5  * Derived from Intel e1000 driver
   6  * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
   7  */
   8
   9 #ifndef _ATHL1E_HW_H_
  10 #define _ATHL1E_HW_H_
  11
  12 #include <linux/types.h>
  13 #include <linux/mii.h>
  14
  15 struct atl1e_adapter;
  16 struct atl1e_hw;
  17
  18 /* function prototype */
  19 s32 atl1e_reset_hw(struct atl1e_hw *hw);
  20 s32 atl1e_read_mac_addr(struct atl1e_hw *hw);
  21 s32 atl1e_init_hw(struct atl1e_hw *hw);
  22 s32 atl1e_phy_commit(struct atl1e_hw *hw);
  23 s32 atl1e_get_speed_and_duplex(struct atl1e_hw *hw, u16 *speed, u16 *duplex);
  24 u32 atl1e_auto_get_fc(struct atl1e_adapter *adapter, u16 duplex);
  25 u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr);
  26 void atl1e_hash_set(struct atl1e_hw *hw, u32 hash_value);
  27 s32 atl1e_read_phy_reg(struct atl1e_hw *hw, u16 reg_addr, u16 *phy_data);
  28 s32 atl1e_write_phy_reg(struct atl1e_hw *hw, u32 reg_addr, u16 phy_data);
  29 s32 atl1e_validate_mdi_setting(struct atl1e_hw *hw);
  30 void atl1e_hw_set_mac_addr(struct atl1e_hw *hw);
  31 bool atl1e_read_eeprom(struct atl1e_hw *hw, u32 offset, u32 *p_value);
  32 bool atl1e_write_eeprom(struct atl1e_hw *hw, u32 offset, u32 value);
  33 s32 atl1e_phy_enter_power_saving(struct atl1e_hw *hw);
  34 s32 atl1e_phy_leave_power_saving(struct atl1e_hw *hw);
  35 s32 atl1e_phy_init(struct atl1e_hw *hw);
  36 int atl1e_check_eeprom_exist(struct atl1e_hw *hw);
  37 void atl1e_force_ps(struct atl1e_hw *hw);
  38 s32 atl1e_restart_autoneg(struct atl1e_hw *hw);
  39
  40 /* register definition */
  41 #define REG_PM_CTRLSTAT             0x44
  42
  43 #define REG_PCIE_CAP_LIST           0x58
  44
  45 #define REG_DEVICE_CAP              0x5C
  46 #define     DEVICE_CAP_MAX_PAYLOAD_MASK     0x7
  47 #define     DEVICE_CAP_MAX_PAYLOAD_SHIFT    0
  48
  49 #define REG_DEVICE_CTRL             0x60
  50 #define     DEVICE_CTRL_MAX_PAYLOAD_MASK    0x7
  51 #define     DEVICE_CTRL_MAX_PAYLOAD_SHIFT   5
  52 #define     DEVICE_CTRL_MAX_RREQ_SZ_MASK    0x7
  53 #define     DEVICE_CTRL_MAX_RREQ_SZ_SHIFT   12
  54
  55 #define REG_VPD_CAP                 0x6C
  56 #define     VPD_CAP_ID_MASK                 0xff
  57 #define     VPD_CAP_ID_SHIFT                0
  58 #define     VPD_CAP_NEXT_PTR_MASK           0xFF
  59 #define     VPD_CAP_NEXT_PTR_SHIFT          8
  60 #define     VPD_CAP_VPD_ADDR_MASK           0x7FFF
  61 #define     VPD_CAP_VPD_ADDR_SHIFT          16
  62 #define     VPD_CAP_VPD_FLAG                0x80000000
  63
  64 #define REG_VPD_DATA                0x70
  65
  66 #define REG_SPI_FLASH_CTRL          0x200
  67 #define     SPI_FLASH_CTRL_STS_NON_RDY      0x1
  68 #define     SPI_FLASH_CTRL_STS_WEN          0x2
  69 #define     SPI_FLASH_CTRL_STS_WPEN         0x80
  70 #define     SPI_FLASH_CTRL_DEV_STS_MASK     0xFF
  71 #define     SPI_FLASH_CTRL_DEV_STS_SHIFT    0
  72 #define     SPI_FLASH_CTRL_INS_MASK         0x7
  73 #define     SPI_FLASH_CTRL_INS_SHIFT        8
  74 #define     SPI_FLASH_CTRL_START            0x800
  75 #define     SPI_FLASH_CTRL_EN_VPD           0x2000
  76 #define     SPI_FLASH_CTRL_LDSTART          0x8000
  77 #define     SPI_FLASH_CTRL_CS_HI_MASK       0x3
  78 #define     SPI_FLASH_CTRL_CS_HI_SHIFT      16
  79 #define     SPI_FLASH_CTRL_CS_HOLD_MASK     0x3
  80 #define     SPI_FLASH_CTRL_CS_HOLD_SHIFT    18
  81 #define     SPI_FLASH_CTRL_CLK_LO_MASK      0x3
  82 #define     SPI_FLASH_CTRL_CLK_LO_SHIFT     20
  83 #define     SPI_FLASH_CTRL_CLK_HI_MASK      0x3
  84 #define     SPI_FLASH_CTRL_CLK_HI_SHIFT     22
  85 #define     SPI_FLASH_CTRL_CS_SETUP_MASK    0x3
  86 #define     SPI_FLASH_CTRL_CS_SETUP_SHIFT   24
  87 #define     SPI_FLASH_CTRL_EROM_PGSZ_MASK   0x3
  88 #define     SPI_FLASH_CTRL_EROM_PGSZ_SHIFT  26
  89 #define     SPI_FLASH_CTRL_WAIT_READY       0x10000000
  90
  91 #define REG_SPI_ADDR                0x204
  92
  93 #define REG_SPI_DATA                0x208
  94
  95 #define REG_SPI_FLASH_CONFIG        0x20C
  96 #define     SPI_FLASH_CONFIG_LD_ADDR_MASK   0xFFFFFF
  97 #define     SPI_FLASH_CONFIG_LD_ADDR_SHIFT  0
  98 #define     SPI_FLASH_CONFIG_VPD_ADDR_MASK  0x3
  99 #define     SPI_FLASH_CONFIG_VPD_ADDR_SHIFT 24
 100 #define     SPI_FLASH_CONFIG_LD_EXIST       0x4000000
 101
 102
 103 #define REG_SPI_FLASH_OP_PROGRAM    0x210
 104 #define REG_SPI_FLASH_OP_SC_ERASE   0x211
 105 #define REG_SPI_FLASH_OP_CHIP_ERASE 0x212
 106 #define REG_SPI_FLASH_OP_RDID       0x213
 107 #define REG_SPI_FLASH_OP_WREN       0x214
 108 #define REG_SPI_FLASH_OP_RDSR       0x215
 109 #define REG_SPI_FLASH_OP_WRSR       0x216
 110 #define REG_SPI_FLASH_OP_READ       0x217
 111
 112 #define REG_TWSI_CTRL               0x218
 113 #define     TWSI_CTRL_LD_OFFSET_MASK        0xFF
 114 #define     TWSI_CTRL_LD_OFFSET_SHIFT       0
 115 #define     TWSI_CTRL_LD_SLV_ADDR_MASK      0x7
 116 #define     TWSI_CTRL_LD_SLV_ADDR_SHIFT     8
 117 #define     TWSI_CTRL_SW_LDSTART            0x800
 118 #define     TWSI_CTRL_HW_LDSTART            0x1000
 119 #define     TWSI_CTRL_SMB_SLV_ADDR_MASK     0x7F
 120 #define     TWSI_CTRL_SMB_SLV_ADDR_SHIFT    15
 121 #define     TWSI_CTRL_LD_EXIST              0x400000
 122 #define     TWSI_CTRL_READ_FREQ_SEL_MASK    0x3
 123 #define     TWSI_CTRL_READ_FREQ_SEL_SHIFT   23
 124 #define     TWSI_CTRL_FREQ_SEL_100K         0
 125 #define     TWSI_CTRL_FREQ_SEL_200K         1
 126 #define     TWSI_CTRL_FREQ_SEL_300K         2
 127 #define     TWSI_CTRL_FREQ_SEL_400K         3
 128 #define     TWSI_CTRL_SMB_SLV_ADDR
 129 #define     TWSI_CTRL_WRITE_FREQ_SEL_MASK   0x3
 130 #define     TWSI_CTRL_WRITE_FREQ_SEL_SHIFT  24
 131
 132
 133 #define REG_PCIE_DEV_MISC_CTRL      0x21C
 134 #define     PCIE_DEV_MISC_CTRL_EXT_PIPE     0x2
 135 #define     PCIE_DEV_MISC_CTRL_RETRY_BUFDIS 0x1
 136 #define     PCIE_DEV_MISC_CTRL_SPIROM_EXIST 0x4
 137 #define     PCIE_DEV_MISC_CTRL_SERDES_ENDIAN    0x8
 138 #define     PCIE_DEV_MISC_CTRL_SERDES_SEL_DIN   0x10
 139
 140 #define REG_PCIE_PHYMISC            0x1000
 141 #define PCIE_PHYMISC_FORCE_RCV_DET      0x4
 142
 143 #define REG_LTSSM_TEST_MODE         0x12FC
 144 #define         LTSSM_TEST_MODE_DEF     0xE000
 145
 146 /* Selene Master Control Register */
 147 #define REG_MASTER_CTRL             0x1400
 148 #define     MASTER_CTRL_SOFT_RST            0x1
 149 #define     MASTER_CTRL_MTIMER_EN           0x2
 150 #define     MASTER_CTRL_ITIMER_EN           0x4
 151 #define     MASTER_CTRL_MANUAL_INT          0x8
 152 #define     MASTER_CTRL_ITIMER2_EN          0x20
 153 #define     MASTER_CTRL_INT_RDCLR           0x40
 154 #define     MASTER_CTRL_LED_MODE            0x200
 155 #define     MASTER_CTRL_REV_NUM_SHIFT       16
 156 #define     MASTER_CTRL_REV_NUM_MASK        0xff
 157 #define     MASTER_CTRL_DEV_ID_SHIFT        24
 158 #define     MASTER_CTRL_DEV_ID_MASK         0xff
 159
 160 /* Timer Initial Value Register */
 161 #define REG_MANUAL_TIMER_INIT       0x1404
 162
 163
 164 /* IRQ ModeratorTimer Initial Value Register */
 165 #define REG_IRQ_MODU_TIMER_INIT     0x1408   /* w */
 166 #define REG_IRQ_MODU_TIMER2_INIT    0x140A   /* w */
 167
 168
 169 #define REG_GPHY_CTRL               0x140C
 170 #define     GPHY_CTRL_EXT_RESET         1
 171 #define     GPHY_CTRL_PIPE_MOD          2
 172 #define     GPHY_CTRL_TEST_MODE_MASK    3
 173 #define     GPHY_CTRL_TEST_MODE_SHIFT   2
 174 #define     GPHY_CTRL_BERT_START        0x10
 175 #define     GPHY_CTRL_GATE_25M_EN       0x20
 176 #define     GPHY_CTRL_LPW_EXIT          0x40
 177 #define     GPHY_CTRL_PHY_IDDQ          0x80
 178 #define     GPHY_CTRL_PHY_IDDQ_DIS      0x100
 179 #define     GPHY_CTRL_PCLK_SEL_DIS      0x200
 180 #define     GPHY_CTRL_HIB_EN            0x400
 181 #define     GPHY_CTRL_HIB_PULSE         0x800
 182 #define     GPHY_CTRL_SEL_ANA_RST       0x1000
 183 #define     GPHY_CTRL_PHY_PLL_ON        0x2000
 184 #define     GPHY_CTRL_PWDOWN_HW         0x4000
 185 #define     GPHY_CTRL_DEFAULT (\
 186                 GPHY_CTRL_PHY_PLL_ON    |\
 187                 GPHY_CTRL_SEL_ANA_RST   |\
 188                 GPHY_CTRL_HIB_PULSE     |\
 189                 GPHY_CTRL_HIB_EN)
 190
 191 #define     GPHY_CTRL_PW_WOL_DIS (\
 192                 GPHY_CTRL_PHY_PLL_ON    |\
 193                 GPHY_CTRL_SEL_ANA_RST   |\
 194                 GPHY_CTRL_HIB_PULSE     |\
 195                 GPHY_CTRL_HIB_EN        |\
 196                 GPHY_CTRL_PWDOWN_HW     |\
 197                 GPHY_CTRL_PCLK_SEL_DIS  |\
 198                 GPHY_CTRL_PHY_IDDQ)
 199
 200 /* IRQ Anti-Lost Timer Initial Value Register */
 201 #define REG_CMBDISDMA_TIMER         0x140E
 202
 203
 204 /* Block IDLE Status Register */
 205 #define REG_IDLE_STATUS         0x1410
 206 #define     IDLE_STATUS_RXMAC       1    /* 1: RXMAC state machine is in non-IDLE state. 0: RXMAC is idling */
 207 #define     IDLE_STATUS_TXMAC       2    /* 1: TXMAC state machine is in non-IDLE state. 0: TXMAC is idling */
 208 #define     IDLE_STATUS_RXQ         4    /* 1: RXQ state machine is in non-IDLE state.   0: RXQ is idling   */
 209 #define     IDLE_STATUS_TXQ         8    /* 1: TXQ state machine is in non-IDLE state.   0: TXQ is idling   */
 210 #define     IDLE_STATUS_DMAR        0x10 /* 1: DMAR state machine is in non-IDLE state.  0: DMAR is idling  */
 211 #define     IDLE_STATUS_DMAW        0x20 /* 1: DMAW state machine is in non-IDLE state.  0: DMAW is idling  */
 212 #define     IDLE_STATUS_SMB         0x40 /* 1: SMB state machine is in non-IDLE state.   0: SMB is idling   */
 213 #define     IDLE_STATUS_CMB         0x80 /* 1: CMB state machine is in non-IDLE state.   0: CMB is idling   */
 214
 215 /* MDIO Control Register */
 216 #define REG_MDIO_CTRL           0x1414
 217 #define     MDIO_DATA_MASK          0xffff  /* On MDIO write, the 16-bit control data to write to PHY MII management register */
 218 #define     MDIO_DATA_SHIFT         0       /* On MDIO read, the 16-bit status data that was read from the PHY MII management register*/
 219 #define     MDIO_REG_ADDR_MASK      0x1f    /* MDIO register address */
 220 #define     MDIO_REG_ADDR_SHIFT     16
 221 #define     MDIO_RW                 0x200000      /* 1: read, 0: write */
 222 #define     MDIO_SUP_PREAMBLE       0x400000      /* Suppress preamble */
 223 #define     MDIO_START              0x800000      /* Write 1 to initiate the MDIO master. And this bit is self cleared after one cycle*/
 224 #define     MDIO_CLK_SEL_SHIFT      24
 225 #define     MDIO_CLK_25_4           0
 226 #define     MDIO_CLK_25_6           2
 227 #define     MDIO_CLK_25_8           3
 228 #define     MDIO_CLK_25_10          4
 229 #define     MDIO_CLK_25_14          5
 230 #define     MDIO_CLK_25_20          6
 231 #define     MDIO_CLK_25_28          7
 232 #define     MDIO_BUSY               0x8000000
 233 #define     MDIO_AP_EN              0x10000000
 234 #define MDIO_WAIT_TIMES         10
 235
 236 /* MII PHY Status Register */
 237 #define REG_PHY_STATUS           0x1418
 238 #define     PHY_STATUS_100M           0x20000
 239 #define     PHY_STATUS_EMI_CA         0x40000
 240
 241 /* BIST Control and Status Register0 (for the Packet Memory) */
 242 #define REG_BIST0_CTRL              0x141c
 243 #define     BIST0_NOW                   0x1 /* 1: To trigger BIST0 logic. This bit stays high during the */
 244 /* BIST process and reset to zero when BIST is done */
 245 #define     BIST0_SRAM_FAIL             0x2 /* 1: The SRAM failure is un-repairable because it has address */
 246 /* decoder failure or more than 1 cell stuck-to-x failure */
 247 #define     BIST0_FUSE_FLAG             0x4 /* 1: Indicating one cell has been fixed */
 248
 249 /* BIST Control and Status Register1(for the retry buffer of PCI Express) */
 250 #define REG_BIST1_CTRL              0x1420
 251 #define     BIST1_NOW                   0x1 /* 1: To trigger BIST0 logic. This bit stays high during the */
 252 /* BIST process and reset to zero when BIST is done */
 253 #define     BIST1_SRAM_FAIL             0x2 /* 1: The SRAM failure is un-repairable because it has address */
 254 /* decoder failure or more than 1 cell stuck-to-x failure.*/
 255 #define     BIST1_FUSE_FLAG             0x4
 256
 257 /* SerDes Lock Detect Control and Status Register */
 258 #define REG_SERDES_LOCK             0x1424
 259 #define     SERDES_LOCK_DETECT          1  /* 1: SerDes lock detected . This signal comes from Analog SerDes */
 260 #define     SERDES_LOCK_DETECT_EN       2  /* 1: Enable SerDes Lock detect function */
 261
 262 /* MAC Control Register  */
 263 #define REG_MAC_CTRL                0x1480
 264 #define     MAC_CTRL_TX_EN              1  /* 1: Transmit Enable */
 265 #define     MAC_CTRL_RX_EN              2  /* 1: Receive Enable */
 266 #define     MAC_CTRL_TX_FLOW            4  /* 1: Transmit Flow Control Enable */
 267 #define     MAC_CTRL_RX_FLOW            8  /* 1: Receive Flow Control Enable */
 268 #define     MAC_CTRL_LOOPBACK           0x10      /* 1: Loop back at G/MII Interface */
 269 #define     MAC_CTRL_DUPLX              0x20      /* 1: Full-duplex mode  0: Half-duplex mode */
 270 #define     MAC_CTRL_ADD_CRC            0x40      /* 1: Instruct MAC to attach CRC on all egress Ethernet frames */
 271 #define     MAC_CTRL_PAD                0x80      /* 1: Instruct MAC to pad short frames to 60-bytes, and then attach CRC. This bit has higher priority over CRC_EN */
 272 #define     MAC_CTRL_LENCHK             0x100     /* 1: Instruct MAC to check if length field matches the real packet length */
 273 #define     MAC_CTRL_HUGE_EN            0x200     /* 1: receive Jumbo frame enable */
 274 #define     MAC_CTRL_PRMLEN_SHIFT       10        /* Preamble length */
 275 #define     MAC_CTRL_PRMLEN_MASK        0xf
 276 #define     MAC_CTRL_RMV_VLAN           0x4000    /* 1: to remove VLAN Tag automatically from all receive packets */
 277 #define     MAC_CTRL_PROMIS_EN          0x8000    /* 1: Promiscuous Mode Enable */
 278 #define     MAC_CTRL_TX_PAUSE           0x10000   /* 1: transmit test pause */
 279 #define     MAC_CTRL_SCNT               0x20000   /* 1: shortcut slot time counter */
 280 #define     MAC_CTRL_SRST_TX            0x40000   /* 1: synchronized reset Transmit MAC module */
 281 #define     MAC_CTRL_TX_SIMURST         0x80000   /* 1: transmit simulation reset */
 282 #define     MAC_CTRL_SPEED_SHIFT        20        /* 10: gigabit 01:10M/100M */
 283 #define     MAC_CTRL_SPEED_MASK         0x300000
 284 #define     MAC_CTRL_SPEED_1000         2
 285 #define     MAC_CTRL_SPEED_10_100       1
 286 #define     MAC_CTRL_DBG_TX_BKPRESURE   0x400000  /* 1: transmit maximum backoff (half-duplex test bit) */
 287 #define     MAC_CTRL_TX_HUGE            0x800000  /* 1: transmit huge enable */
 288 #define     MAC_CTRL_RX_CHKSUM_EN       0x1000000 /* 1: RX checksum enable */
 289 #define     MAC_CTRL_MC_ALL_EN          0x2000000 /* 1: upload all multicast frame without error to system */
 290 #define     MAC_CTRL_BC_EN              0x4000000 /* 1: upload all broadcast frame without error to system */
 291 #define     MAC_CTRL_DBG                0x8000000 /* 1: upload all received frame to system (Debug Mode) */
 292
 293 /* MAC IPG/IFG Control Register  */
 294 #define REG_MAC_IPG_IFG             0x1484
 295 #define     MAC_IPG_IFG_IPGT_SHIFT      0     /* Desired back to back inter-packet gap. The default is 96-bit time */
 296 #define     MAC_IPG_IFG_IPGT_MASK       0x7f
 297 #define     MAC_IPG_IFG_MIFG_SHIFT      8     /* Minimum number of IFG to enforce in between RX frames */
 298 #define     MAC_IPG_IFG_MIFG_MASK       0xff  /* Frame gap below such IFP is dropped */
 299 #define     MAC_IPG_IFG_IPGR1_SHIFT     16    /* 64bit Carrier-Sense window */
 300 #define     MAC_IPG_IFG_IPGR1_MASK      0x7f
 301 #define     MAC_IPG_IFG_IPGR2_SHIFT     24    /* 96-bit IPG window */
 302 #define     MAC_IPG_IFG_IPGR2_MASK      0x7f
 303
 304 /* MAC STATION ADDRESS  */
 305 #define REG_MAC_STA_ADDR            0x1488
 306
 307 /* Hash table for multicast address */
 308 #define REG_RX_HASH_TABLE           0x1490
 309
 310
 311 /* MAC Half-Duplex Control Register */
 312 #define REG_MAC_HALF_DUPLX_CTRL     0x1498
 313 #define     MAC_HALF_DUPLX_CTRL_LCOL_SHIFT   0      /* Collision Window */
 314 #define     MAC_HALF_DUPLX_CTRL_LCOL_MASK    0x3ff
 315 #define     MAC_HALF_DUPLX_CTRL_RETRY_SHIFT  12     /* Retransmission maximum, afterwards the packet will be discarded */
 316 #define     MAC_HALF_DUPLX_CTRL_RETRY_MASK   0xf
 317 #define     MAC_HALF_DUPLX_CTRL_EXC_DEF_EN   0x10000 /* 1: Allow the transmission of a packet which has been excessively deferred */
 318 #define     MAC_HALF_DUPLX_CTRL_NO_BACK_C    0x20000 /* 1: No back-off on collision, immediately start the retransmission */
 319 #define     MAC_HALF_DUPLX_CTRL_NO_BACK_P    0x40000 /* 1: No back-off on backpressure, immediately start the transmission after back pressure */
 320 #define     MAC_HALF_DUPLX_CTRL_ABEBE        0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */
 321 #define     MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT  20      /* Maximum binary exponential number */
 322 #define     MAC_HALF_DUPLX_CTRL_ABEBT_MASK   0xf
 323 #define     MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24      /* IPG to start JAM for collision based flow control in half-duplex */
 324 #define     MAC_HALF_DUPLX_CTRL_JAMIPG_MASK  0xf     /* mode. In unit of 8-bit time */
 325
 326 /* Maximum Frame Length Control Register   */
 327 #define REG_MTU                     0x149c
 328
 329 /* Wake-On-Lan control register */
 330 #define REG_WOL_CTRL                0x14a0
 331 #define     WOL_PATTERN_EN                  0x00000001
 332 #define     WOL_PATTERN_PME_EN              0x00000002
 333 #define     WOL_MAGIC_EN                    0x00000004
 334 #define     WOL_MAGIC_PME_EN                0x00000008
 335 #define     WOL_LINK_CHG_EN                 0x00000010
 336 #define     WOL_LINK_CHG_PME_EN             0x00000020
 337 #define     WOL_PATTERN_ST                  0x00000100
 338 #define     WOL_MAGIC_ST                    0x00000200
 339 #define     WOL_LINKCHG_ST                  0x00000400
 340 #define     WOL_CLK_SWITCH_EN               0x00008000
 341 #define     WOL_PT0_EN                      0x00010000
 342 #define     WOL_PT1_EN                      0x00020000
 343 #define     WOL_PT2_EN                      0x00040000
 344 #define     WOL_PT3_EN                      0x00080000
 345 #define     WOL_PT4_EN                      0x00100000
 346 #define     WOL_PT5_EN                      0x00200000
 347 #define     WOL_PT6_EN                      0x00400000
 348 /* WOL Length ( 2 DWORD ) */
 349 #define REG_WOL_PATTERN_LEN         0x14a4
 350 #define     WOL_PT_LEN_MASK                 0x7f
 351 #define     WOL_PT0_LEN_SHIFT               0
 352 #define     WOL_PT1_LEN_SHIFT               8
 353 #define     WOL_PT2_LEN_SHIFT               16
 354 #define     WOL_PT3_LEN_SHIFT               24
 355 #define     WOL_PT4_LEN_SHIFT               0
 356 #define     WOL_PT5_LEN_SHIFT               8
 357 #define     WOL_PT6_LEN_SHIFT               16
 358
 359 /* Internal SRAM Partition Register */
 360 #define REG_SRAM_TRD_ADDR           0x1518
 361 #define REG_SRAM_TRD_LEN            0x151C
 362 #define REG_SRAM_RXF_ADDR           0x1520
 363 #define REG_SRAM_RXF_LEN            0x1524
 364 #define REG_SRAM_TXF_ADDR           0x1528
 365 #define REG_SRAM_TXF_LEN            0x152C
 366 #define REG_SRAM_TCPH_ADDR          0x1530
 367 #define REG_SRAM_PKTH_ADDR          0x1532
 368
 369 /* Load Ptr Register */
 370 #define REG_LOAD_PTR                0x1534  /* Software sets this bit after the initialization of the head and tail */
 371
 372 /*
 373  * addresses of all descriptors, as well as the following descriptor
 374  * control register, which triggers each function block to load the head
 375  * pointer to prepare for the operation. This bit is then self-cleared
 376  * after one cycle.
 377  */
 378
 379 /* Descriptor Control register  */
 380 #define REG_RXF3_BASE_ADDR_HI           0x153C
 381 #define REG_DESC_BASE_ADDR_HI           0x1540
 382 #define REG_RXF0_BASE_ADDR_HI           0x1540 /* share with DESC BASE ADDR HI */
 383 #define REG_HOST_RXF0_PAGE0_LO          0x1544
 384 #define REG_HOST_RXF0_PAGE1_LO          0x1548
 385 #define REG_TPD_BASE_ADDR_LO            0x154C
 386 #define REG_RXF1_BASE_ADDR_HI           0x1550
 387 #define REG_RXF2_BASE_ADDR_HI           0x1554
 388 #define REG_HOST_RXFPAGE_SIZE           0x1558
 389 #define REG_TPD_RING_SIZE               0x155C
 390 /* RSS about */
 391 #define REG_RSS_KEY0                    0x14B0
 392 #define REG_RSS_KEY1                    0x14B4
 393 #define REG_RSS_KEY2                    0x14B8
 394 #define REG_RSS_KEY3                    0x14BC
 395 #define REG_RSS_KEY4                    0x14C0
 396 #define REG_RSS_KEY5                    0x14C4
 397 #define REG_RSS_KEY6                    0x14C8
 398 #define REG_RSS_KEY7                    0x14CC
 399 #define REG_RSS_KEY8                    0x14D0
 400 #define REG_RSS_KEY9                    0x14D4
 401 #define REG_IDT_TABLE4                  0x14E0
 402 #define REG_IDT_TABLE5                  0x14E4
 403 #define REG_IDT_TABLE6                  0x14E8
 404 #define REG_IDT_TABLE7                  0x14EC
 405 #define REG_IDT_TABLE0                  0x1560
 406 #define REG_IDT_TABLE1                  0x1564
 407 #define REG_IDT_TABLE2                  0x1568
 408 #define REG_IDT_TABLE3                  0x156C
 409 #define REG_IDT_TABLE                   REG_IDT_TABLE0
 410 #define REG_RSS_HASH_VALUE              0x1570
 411 #define REG_RSS_HASH_FLAG               0x1574
 412 #define REG_BASE_CPU_NUMBER             0x157C
 413
 414
 415 /* TXQ Control Register */
 416 #define REG_TXQ_CTRL                0x1580
 417 #define     TXQ_CTRL_NUM_TPD_BURST_MASK     0xF
 418 #define     TXQ_CTRL_NUM_TPD_BURST_SHIFT    0
 419 #define     TXQ_CTRL_EN                     0x20  /* 1: Enable TXQ */
 420 #define     TXQ_CTRL_ENH_MODE               0x40  /* Performance enhancement mode, in which up to two back-to-back DMA read commands might be dispatched. */
 421 #define     TXQ_CTRL_TXF_BURST_NUM_SHIFT    16    /* Number of data byte to read in a cache-aligned burst. Each SRAM entry is 8-byte in length. */
 422 #define     TXQ_CTRL_TXF_BURST_NUM_MASK     0xffff
 423
 424 /* Jumbo packet Threshold for task offload */
 425 #define REG_TX_EARLY_TH                     0x1584 /* Jumbo frame threshold in QWORD unit. Packet greater than */
 426 /* JUMBO_TASK_OFFLOAD_THRESHOLD will not be task offloaded. */
 427 #define     TX_TX_EARLY_TH_MASK             0x7ff
 428 #define     TX_TX_EARLY_TH_SHIFT            0
 429
 430
 431 /* RXQ Control Register */
 432 #define REG_RXQ_CTRL                0x15A0
 433 #define         RXQ_CTRL_PBA_ALIGN_32                   0   /* rx-packet alignment */
 434 #define         RXQ_CTRL_PBA_ALIGN_64                   1
 435 #define         RXQ_CTRL_PBA_ALIGN_128                  2
 436 #define         RXQ_CTRL_PBA_ALIGN_256                  3
 437 #define         RXQ_CTRL_Q1_EN                          0x10
 438 #define         RXQ_CTRL_Q2_EN                          0x20
 439 #define         RXQ_CTRL_Q3_EN                          0x40
 440 #define         RXQ_CTRL_IPV6_XSUM_VERIFY_EN            0x80
 441 #define         RXQ_CTRL_HASH_TLEN_SHIFT                8
 442 #define         RXQ_CTRL_HASH_TLEN_MASK                 0xFF
 443 #define         RXQ_CTRL_HASH_TYPE_IPV4                 0x10000
 444 #define         RXQ_CTRL_HASH_TYPE_IPV4_TCP             0x20000
 445 #define         RXQ_CTRL_HASH_TYPE_IPV6                 0x40000
 446 #define         RXQ_CTRL_HASH_TYPE_IPV6_TCP             0x80000
 447 #define         RXQ_CTRL_RSS_MODE_DISABLE               0
 448 #define         RXQ_CTRL_RSS_MODE_SQSINT                0x4000000
 449 #define         RXQ_CTRL_RSS_MODE_MQUESINT              0x8000000
 450 #define         RXQ_CTRL_RSS_MODE_MQUEMINT              0xC000000
 451 #define         RXQ_CTRL_NIP_QUEUE_SEL_TBL              0x10000000
 452 #define         RXQ_CTRL_HASH_ENABLE                    0x20000000
 453 #define         RXQ_CTRL_CUT_THRU_EN                    0x40000000
 454 #define         RXQ_CTRL_EN                             0x80000000
 455
 456 /* Rx jumbo packet threshold and rrd  retirement timer  */
 457 #define REG_RXQ_JMBOSZ_RRDTIM       0x15A4
 458 /*
 459  * Jumbo packet threshold for non-VLAN packet, in QWORD (64-bit) unit.
 460  * When the packet length greater than or equal to this value, RXQ
 461  * shall start cut-through forwarding of the received packet.
 462  */
 463 #define         RXQ_JMBOSZ_TH_MASK      0x7ff
 464 #define         RXQ_JMBOSZ_TH_SHIFT         0  /* RRD retirement timer. Decrement by 1 after every 512ns passes*/
 465 #define         RXQ_JMBO_LKAH_MASK          0xf
 466 #define         RXQ_JMBO_LKAH_SHIFT         11
 467
 468 /* RXF flow control register */
 469 #define REG_RXQ_RXF_PAUSE_THRESH    0x15A8
 470 #define     RXQ_RXF_PAUSE_TH_HI_SHIFT       0
 471 #define     RXQ_RXF_PAUSE_TH_HI_MASK        0xfff
 472 #define     RXQ_RXF_PAUSE_TH_LO_SHIFT       16
 473 #define     RXQ_RXF_PAUSE_TH_LO_MASK        0xfff
 474
 475
 476 /* DMA Engine Control Register */
 477 #define REG_DMA_CTRL                0x15C0
 478 #define     DMA_CTRL_DMAR_IN_ORDER          0x1
 479 #define     DMA_CTRL_DMAR_ENH_ORDER         0x2
 480 #define     DMA_CTRL_DMAR_OUT_ORDER         0x4
 481 #define     DMA_CTRL_RCB_VALUE              0x8
 482 #define     DMA_CTRL_DMAR_BURST_LEN_SHIFT   4
 483 #define     DMA_CTRL_DMAR_BURST_LEN_MASK    7
 484 #define     DMA_CTRL_DMAW_BURST_LEN_SHIFT   7
 485 #define     DMA_CTRL_DMAW_BURST_LEN_MASK    7
 486 #define     DMA_CTRL_DMAR_REQ_PRI           0x400
 487 #define     DMA_CTRL_DMAR_DLY_CNT_MASK      0x1F
 488 #define     DMA_CTRL_DMAR_DLY_CNT_SHIFT     11
 489 #define     DMA_CTRL_DMAW_DLY_CNT_MASK      0xF
 490 #define     DMA_CTRL_DMAW_DLY_CNT_SHIFT     16
 491 #define     DMA_CTRL_TXCMB_EN               0x100000
 492 #define     DMA_CTRL_RXCMB_EN                           0x200000
 493
 494
 495 /* CMB/SMB Control Register */
 496 #define REG_SMB_STAT_TIMER                      0x15C4
 497 #define REG_TRIG_RRD_THRESH                     0x15CA
 498 #define REG_TRIG_TPD_THRESH                     0x15C8
 499 #define REG_TRIG_TXTIMER                        0x15CC
 500 #define REG_TRIG_RXTIMER                        0x15CE
 501
 502 /* HOST RXF Page 1,2,3 address */
 503 #define REG_HOST_RXF1_PAGE0_LO                  0x15D0
 504 #define REG_HOST_RXF1_PAGE1_LO                  0x15D4
 505 #define REG_HOST_RXF2_PAGE0_LO                  0x15D8
 506 #define REG_HOST_RXF2_PAGE1_LO                  0x15DC
 507 #define REG_HOST_RXF3_PAGE0_LO                  0x15E0
 508 #define REG_HOST_RXF3_PAGE1_LO                  0x15E4
 509
 510 /* Mail box */
 511 #define REG_MB_RXF1_RADDR                       0x15B4
 512 #define REG_MB_RXF2_RADDR                       0x15B8
 513 #define REG_MB_RXF3_RADDR                       0x15BC
 514 #define REG_MB_TPD_PROD_IDX                     0x15F0
 515
 516 /* RXF-Page 0-3  PageNo & Valid bit */
 517 #define REG_HOST_RXF0_PAGE0_VLD     0x15F4
 518 #define     HOST_RXF_VALID              1
 519 #define     HOST_RXF_PAGENO_SHIFT       1
 520 #define     HOST_RXF_PAGENO_MASK        0x7F
 521 #define REG_HOST_RXF0_PAGE1_VLD     0x15F5
 522 #define REG_HOST_RXF1_PAGE0_VLD     0x15F6
 523 #define REG_HOST_RXF1_PAGE1_VLD     0x15F7
 524 #define REG_HOST_RXF2_PAGE0_VLD     0x15F8
 525 #define REG_HOST_RXF2_PAGE1_VLD     0x15F9
 526 #define REG_HOST_RXF3_PAGE0_VLD     0x15FA
 527 #define REG_HOST_RXF3_PAGE1_VLD     0x15FB
 528
 529 /* Interrupt Status Register */
 530 #define REG_ISR    0x1600
 531 #define  ISR_SMB                1
 532 #define  ISR_TIMER              2       /* Interrupt when Timer is counted down to zero */
 533 /*
 534  * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set
 535  * in Table 51 Selene Master Control Register (Offset 0x1400).
 536  */
 537 #define  ISR_MANUAL             4
 538 #define  ISR_HW_RXF_OV          8        /* RXF overflow interrupt */
 539 #define  ISR_HOST_RXF0_OV       0x10
 540 #define  ISR_HOST_RXF1_OV       0x20
 541 #define  ISR_HOST_RXF2_OV       0x40
 542 #define  ISR_HOST_RXF3_OV       0x80
 543 #define  ISR_TXF_UN             0x100
 544 #define  ISR_RX0_PAGE_FULL      0x200
 545 #define  ISR_DMAR_TO_RST        0x400
 546 #define  ISR_DMAW_TO_RST        0x800
 547 #define  ISR_GPHY               0x1000
 548 #define  ISR_TX_CREDIT          0x2000
 549 #define  ISR_GPHY_LPW           0x4000    /* GPHY low power state interrupt */
 550 #define  ISR_RX_PKT             0x10000   /* One packet received, triggered by RFD */
 551 #define  ISR_TX_PKT             0x20000   /* One packet transmitted, triggered by TPD */
 552 #define  ISR_TX_DMA             0x40000
 553 #define  ISR_RX_PKT_1           0x80000
 554 #define  ISR_RX_PKT_2           0x100000
 555 #define  ISR_RX_PKT_3           0x200000
 556 #define  ISR_MAC_RX             0x400000
 557 #define  ISR_MAC_TX             0x800000
 558 #define  ISR_UR_DETECTED        0x1000000
 559 #define  ISR_FERR_DETECTED      0x2000000
 560 #define  ISR_NFERR_DETECTED     0x4000000
 561 #define  ISR_CERR_DETECTED      0x8000000
 562 #define  ISR_PHY_LINKDOWN       0x10000000
 563 #define  ISR_DIS_INT            0x80000000
 564
 565
 566 /* Interrupt Mask Register */
 567 #define REG_IMR 0x1604
 568
 569
 570 #define IMR_NORMAL_MASK (\
 571                 ISR_SMB         |\
 572                 ISR_TXF_UN      |\
 573                 ISR_HW_RXF_OV   |\
 574                 ISR_HOST_RXF0_OV|\
 575                 ISR_MANUAL      |\
 576                 ISR_GPHY        |\
 577                 ISR_GPHY_LPW    |\
 578                 ISR_DMAR_TO_RST |\
 579                 ISR_DMAW_TO_RST |\
 580                 ISR_PHY_LINKDOWN|\
 581                 ISR_RX_PKT      |\
 582                 ISR_TX_PKT)
 583
 584 #define ISR_TX_EVENT (ISR_TXF_UN | ISR_TX_PKT)
 585 #define ISR_RX_EVENT (ISR_HOST_RXF0_OV | ISR_HW_RXF_OV | ISR_RX_PKT)
 586
 587 #define REG_MAC_RX_STATUS_BIN 0x1700
 588 #define REG_MAC_RX_STATUS_END 0x175c
 589 #define REG_MAC_TX_STATUS_BIN 0x1760
 590 #define REG_MAC_TX_STATUS_END 0x17c0
 591
 592 /* Hardware Offset Register */
 593 #define REG_HOST_RXF0_PAGEOFF 0x1800
 594 #define REG_TPD_CONS_IDX      0x1804
 595 #define REG_HOST_RXF1_PAGEOFF 0x1808
 596 #define REG_HOST_RXF2_PAGEOFF 0x180C
 597 #define REG_HOST_RXF3_PAGEOFF 0x1810
 598
 599 /* RXF-Page 0-3 Offset DMA Address */
 600 #define REG_HOST_RXF0_MB0_LO  0x1820
 601 #define REG_HOST_RXF0_MB1_LO  0x1824
 602 #define REG_HOST_RXF1_MB0_LO  0x1828
 603 #define REG_HOST_RXF1_MB1_LO  0x182C
 604 #define REG_HOST_RXF2_MB0_LO  0x1830
 605 #define REG_HOST_RXF2_MB1_LO  0x1834
 606 #define REG_HOST_RXF3_MB0_LO  0x1838
 607 #define REG_HOST_RXF3_MB1_LO  0x183C
 608
 609 /* Tpd CMB DMA Address */
 610 #define REG_HOST_TX_CMB_LO    0x1840
 611 #define REG_HOST_SMB_ADDR_LO  0x1844
 612
 613 /* DEBUG ADDR */
 614 #define REG_DEBUG_DATA0 0x1900
 615 #define REG_DEBUG_DATA1 0x1904
 616
 617 /***************************** MII definition ***************************************/
 618 /* PHY Common Register */
 619 #define MII_AT001_PSCR                  0x10
 620 #define MII_AT001_PSSR                  0x11
 621 #define MII_INT_CTRL                    0x12
 622 #define MII_INT_STATUS                  0x13
 623 #define MII_SMARTSPEED                  0x14
 624 #define MII_LBRERROR                    0x18
 625 #define MII_RESV2                       0x1a
 626
 627 #define MII_DBG_ADDR                    0x1D
 628 #define MII_DBG_DATA                    0x1E
 629
 630 /* Autoneg Advertisement Register */
 631 #define MII_AR_DEFAULT_CAP_MASK                 0
 632
 633 /* 1000BASE-T Control Register */
 634 #define MII_AT001_CR_1000T_SPEED_MASK \
 635         (ADVERTISE_1000FULL | ADVERTISE_1000HALF)
 636 #define MII_AT001_CR_1000T_DEFAULT_CAP_MASK     MII_AT001_CR_1000T_SPEED_MASK
 637
 638 /* AT001 PHY Specific Control Register */
 639 #define MII_AT001_PSCR_JABBER_DISABLE           0x0001  /* 1=Jabber Function disabled */
 640 #define MII_AT001_PSCR_POLARITY_REVERSAL        0x0002  /* 1=Polarity Reversal enabled */
 641 #define MII_AT001_PSCR_SQE_TEST                 0x0004  /* 1=SQE Test enabled */
 642 #define MII_AT001_PSCR_MAC_POWERDOWN            0x0008
 643 #define MII_AT001_PSCR_CLK125_DISABLE           0x0010  /* 1=CLK125 low,
 644                                                          * 0=CLK125 toggling
 645                                                          */
 646 #define MII_AT001_PSCR_MDI_MANUAL_MODE          0x0000  /* MDI Crossover Mode bits 6:5 */
 647 /* Manual MDI configuration */
 648 #define MII_AT001_PSCR_MDIX_MANUAL_MODE         0x0020  /* Manual MDIX configuration */
 649 #define MII_AT001_PSCR_AUTO_X_1000T             0x0040  /* 1000BASE-T: Auto crossover,
 650                                                          *  100BASE-TX/10BASE-T:
 651                                                          *  MDI Mode
 652                                                          */
 653 #define MII_AT001_PSCR_AUTO_X_MODE              0x0060  /* Auto crossover enabled
 654                                                          * all speeds.
 655                                                          */
 656 #define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE     0x0080
 657 /* 1=Enable Extended 10BASE-T distance
 658  * (Lower 10BASE-T RX Threshold)
 659  * 0=Normal 10BASE-T RX Threshold */
 660 #define MII_AT001_PSCR_MII_5BIT_ENABLE          0x0100
 661 /* 1=5-Bit interface in 100BASE-TX
 662  * 0=MII interface in 100BASE-TX */
 663 #define MII_AT001_PSCR_SCRAMBLER_DISABLE        0x0200  /* 1=Scrambler disable */
 664 #define MII_AT001_PSCR_FORCE_LINK_GOOD          0x0400  /* 1=Force link good */
 665 #define MII_AT001_PSCR_ASSERT_CRS_ON_TX         0x0800  /* 1=Assert CRS on Transmit */
 666 #define MII_AT001_PSCR_POLARITY_REVERSAL_SHIFT    1
 667 #define MII_AT001_PSCR_AUTO_X_MODE_SHIFT          5
 668 #define MII_AT001_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
 669 /* AT001 PHY Specific Status Register */
 670 #define MII_AT001_PSSR_SPD_DPLX_RESOLVED        0x0800  /* 1=Speed & Duplex resolved */
 671 #define MII_AT001_PSSR_DPLX                     0x2000  /* 1=Duplex 0=Half Duplex */
 672 #define MII_AT001_PSSR_SPEED                    0xC000  /* Speed, bits 14:15 */
 673 #define MII_AT001_PSSR_10MBS                    0x0000  /* 00=10Mbs */
 674 #define MII_AT001_PSSR_100MBS                   0x4000  /* 01=100Mbs */
 675 #define MII_AT001_PSSR_1000MBS                  0x8000  /* 10=1000Mbs */
 676
 677 #endif /*_ATHL1E_HW_H_*/