gpio: rcar: Fix runtime PM imbalance on error
[linux/fpc-iii.git] / drivers / net / wireless / realtek / rtl8xxxu / rtl8xxxu_core.c
blob19efae462a242aabb6cd43fea472ebdbd428c71e
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * RTL8XXXU mac80211 USB driver
5 * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com>
7 * Portions, notably calibration code:
8 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
10 * This driver was written as a replacement for the vendor provided
11 * rtl8723au driver. As the Realtek 8xxx chips are very similar in
12 * their programming interface, I have started adding support for
13 * additional 8xxx chips like the 8192cu, 8188cus, etc.
16 #include <linux/init.h>
17 #include <linux/kernel.h>
18 #include <linux/sched.h>
19 #include <linux/errno.h>
20 #include <linux/slab.h>
21 #include <linux/module.h>
22 #include <linux/spinlock.h>
23 #include <linux/list.h>
24 #include <linux/usb.h>
25 #include <linux/netdevice.h>
26 #include <linux/etherdevice.h>
27 #include <linux/ethtool.h>
28 #include <linux/wireless.h>
29 #include <linux/firmware.h>
30 #include <linux/moduleparam.h>
31 #include <net/mac80211.h>
32 #include "rtl8xxxu.h"
33 #include "rtl8xxxu_regs.h"
35 #define DRIVER_NAME "rtl8xxxu"
37 int rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE;
38 static bool rtl8xxxu_ht40_2g;
39 static bool rtl8xxxu_dma_aggregation;
40 static int rtl8xxxu_dma_agg_timeout = -1;
41 static int rtl8xxxu_dma_agg_pages = -1;
43 MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@gmail.com>");
44 MODULE_DESCRIPTION("RTL8XXXu USB mac80211 Wireless LAN Driver");
45 MODULE_LICENSE("GPL");
46 MODULE_FIRMWARE("rtlwifi/rtl8723aufw_A.bin");
47 MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B.bin");
48 MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B_NoBT.bin");
49 MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin");
50 MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin");
51 MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin");
52 MODULE_FIRMWARE("rtlwifi/rtl8192eu_nic.bin");
53 MODULE_FIRMWARE("rtlwifi/rtl8723bu_nic.bin");
54 MODULE_FIRMWARE("rtlwifi/rtl8723bu_bt.bin");
56 module_param_named(debug, rtl8xxxu_debug, int, 0600);
57 MODULE_PARM_DESC(debug, "Set debug mask");
58 module_param_named(ht40_2g, rtl8xxxu_ht40_2g, bool, 0600);
59 MODULE_PARM_DESC(ht40_2g, "Enable HT40 support on the 2.4GHz band");
60 module_param_named(dma_aggregation, rtl8xxxu_dma_aggregation, bool, 0600);
61 MODULE_PARM_DESC(dma_aggregation, "Enable DMA packet aggregation");
62 module_param_named(dma_agg_timeout, rtl8xxxu_dma_agg_timeout, int, 0600);
63 MODULE_PARM_DESC(dma_agg_timeout, "Set DMA aggregation timeout (range 1-127)");
64 module_param_named(dma_agg_pages, rtl8xxxu_dma_agg_pages, int, 0600);
65 MODULE_PARM_DESC(dma_agg_pages, "Set DMA aggregation pages (range 1-127, 0 to disable)");
67 #define USB_VENDOR_ID_REALTEK 0x0bda
68 #define RTL8XXXU_RX_URBS 32
69 #define RTL8XXXU_RX_URB_PENDING_WATER 8
70 #define RTL8XXXU_TX_URBS 64
71 #define RTL8XXXU_TX_URB_LOW_WATER 25
72 #define RTL8XXXU_TX_URB_HIGH_WATER 32
74 static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv,
75 struct rtl8xxxu_rx_urb *rx_urb);
77 static struct ieee80211_rate rtl8xxxu_rates[] = {
78 { .bitrate = 10, .hw_value = DESC_RATE_1M, .flags = 0 },
79 { .bitrate = 20, .hw_value = DESC_RATE_2M, .flags = 0 },
80 { .bitrate = 55, .hw_value = DESC_RATE_5_5M, .flags = 0 },
81 { .bitrate = 110, .hw_value = DESC_RATE_11M, .flags = 0 },
82 { .bitrate = 60, .hw_value = DESC_RATE_6M, .flags = 0 },
83 { .bitrate = 90, .hw_value = DESC_RATE_9M, .flags = 0 },
84 { .bitrate = 120, .hw_value = DESC_RATE_12M, .flags = 0 },
85 { .bitrate = 180, .hw_value = DESC_RATE_18M, .flags = 0 },
86 { .bitrate = 240, .hw_value = DESC_RATE_24M, .flags = 0 },
87 { .bitrate = 360, .hw_value = DESC_RATE_36M, .flags = 0 },
88 { .bitrate = 480, .hw_value = DESC_RATE_48M, .flags = 0 },
89 { .bitrate = 540, .hw_value = DESC_RATE_54M, .flags = 0 },
92 static struct ieee80211_channel rtl8xxxu_channels_2g[] = {
93 { .band = NL80211_BAND_2GHZ, .center_freq = 2412,
94 .hw_value = 1, .max_power = 30 },
95 { .band = NL80211_BAND_2GHZ, .center_freq = 2417,
96 .hw_value = 2, .max_power = 30 },
97 { .band = NL80211_BAND_2GHZ, .center_freq = 2422,
98 .hw_value = 3, .max_power = 30 },
99 { .band = NL80211_BAND_2GHZ, .center_freq = 2427,
100 .hw_value = 4, .max_power = 30 },
101 { .band = NL80211_BAND_2GHZ, .center_freq = 2432,
102 .hw_value = 5, .max_power = 30 },
103 { .band = NL80211_BAND_2GHZ, .center_freq = 2437,
104 .hw_value = 6, .max_power = 30 },
105 { .band = NL80211_BAND_2GHZ, .center_freq = 2442,
106 .hw_value = 7, .max_power = 30 },
107 { .band = NL80211_BAND_2GHZ, .center_freq = 2447,
108 .hw_value = 8, .max_power = 30 },
109 { .band = NL80211_BAND_2GHZ, .center_freq = 2452,
110 .hw_value = 9, .max_power = 30 },
111 { .band = NL80211_BAND_2GHZ, .center_freq = 2457,
112 .hw_value = 10, .max_power = 30 },
113 { .band = NL80211_BAND_2GHZ, .center_freq = 2462,
114 .hw_value = 11, .max_power = 30 },
115 { .band = NL80211_BAND_2GHZ, .center_freq = 2467,
116 .hw_value = 12, .max_power = 30 },
117 { .band = NL80211_BAND_2GHZ, .center_freq = 2472,
118 .hw_value = 13, .max_power = 30 },
119 { .band = NL80211_BAND_2GHZ, .center_freq = 2484,
120 .hw_value = 14, .max_power = 30 }
123 static struct ieee80211_supported_band rtl8xxxu_supported_band = {
124 .channels = rtl8xxxu_channels_2g,
125 .n_channels = ARRAY_SIZE(rtl8xxxu_channels_2g),
126 .bitrates = rtl8xxxu_rates,
127 .n_bitrates = ARRAY_SIZE(rtl8xxxu_rates),
130 struct rtl8xxxu_reg8val rtl8xxxu_gen1_mac_init_table[] = {
131 {0x420, 0x80}, {0x423, 0x00}, {0x430, 0x00}, {0x431, 0x00},
132 {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05},
133 {0x436, 0x06}, {0x437, 0x07}, {0x438, 0x00}, {0x439, 0x00},
134 {0x43a, 0x00}, {0x43b, 0x01}, {0x43c, 0x04}, {0x43d, 0x05},
135 {0x43e, 0x06}, {0x43f, 0x07}, {0x440, 0x5d}, {0x441, 0x01},
136 {0x442, 0x00}, {0x444, 0x15}, {0x445, 0xf0}, {0x446, 0x0f},
137 {0x447, 0x00}, {0x458, 0x41}, {0x459, 0xa8}, {0x45a, 0x72},
138 {0x45b, 0xb9}, {0x460, 0x66}, {0x461, 0x66}, {0x462, 0x08},
139 {0x463, 0x03}, {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff},
140 {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2},
141 {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3},
142 {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4},
143 {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4},
144 {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a},
145 {0x515, 0x10}, {0x516, 0x0a}, {0x517, 0x10}, {0x51a, 0x16},
146 {0x524, 0x0f}, {0x525, 0x4f}, {0x546, 0x40}, {0x547, 0x00},
147 {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55a, 0x02},
148 {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a},
149 {0x652, 0x20}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e},
150 {0x63f, 0x0e}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43},
151 {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43},
152 {0x70a, 0x65}, {0x70b, 0x87}, {0xffff, 0xff},
155 static struct rtl8xxxu_reg32val rtl8723a_phy_1t_init_table[] = {
156 {0x800, 0x80040000}, {0x804, 0x00000003},
157 {0x808, 0x0000fc00}, {0x80c, 0x0000000a},
158 {0x810, 0x10001331}, {0x814, 0x020c3d10},
159 {0x818, 0x02200385}, {0x81c, 0x00000000},
160 {0x820, 0x01000100}, {0x824, 0x00390004},
161 {0x828, 0x00000000}, {0x82c, 0x00000000},
162 {0x830, 0x00000000}, {0x834, 0x00000000},
163 {0x838, 0x00000000}, {0x83c, 0x00000000},
164 {0x840, 0x00010000}, {0x844, 0x00000000},
165 {0x848, 0x00000000}, {0x84c, 0x00000000},
166 {0x850, 0x00000000}, {0x854, 0x00000000},
167 {0x858, 0x569a569a}, {0x85c, 0x001b25a4},
168 {0x860, 0x66f60110}, {0x864, 0x061f0130},
169 {0x868, 0x00000000}, {0x86c, 0x32323200},
170 {0x870, 0x07000760}, {0x874, 0x22004000},
171 {0x878, 0x00000808}, {0x87c, 0x00000000},
172 {0x880, 0xc0083070}, {0x884, 0x000004d5},
173 {0x888, 0x00000000}, {0x88c, 0xccc000c0},
174 {0x890, 0x00000800}, {0x894, 0xfffffffe},
175 {0x898, 0x40302010}, {0x89c, 0x00706050},
176 {0x900, 0x00000000}, {0x904, 0x00000023},
177 {0x908, 0x00000000}, {0x90c, 0x81121111},
178 {0xa00, 0x00d047c8}, {0xa04, 0x80ff000c},
179 {0xa08, 0x8c838300}, {0xa0c, 0x2e68120f},
180 {0xa10, 0x9500bb78}, {0xa14, 0x11144028},
181 {0xa18, 0x00881117}, {0xa1c, 0x89140f00},
182 {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
183 {0xa28, 0x00000204}, {0xa2c, 0x00d30000},
184 {0xa70, 0x101fbf00}, {0xa74, 0x00000007},
185 {0xa78, 0x00000900},
186 {0xc00, 0x48071d40}, {0xc04, 0x03a05611},
187 {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
188 {0xc10, 0x08800000}, {0xc14, 0x40000100},
189 {0xc18, 0x08800000}, {0xc1c, 0x40000100},
190 {0xc20, 0x00000000}, {0xc24, 0x00000000},
191 {0xc28, 0x00000000}, {0xc2c, 0x00000000},
192 {0xc30, 0x69e9ac44}, {0xc34, 0x469652af},
193 {0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
194 {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
195 {0xc48, 0xec020107}, {0xc4c, 0x007f037f},
196 {0xc50, 0x69543420}, {0xc54, 0x43bc0094},
197 {0xc58, 0x69543420}, {0xc5c, 0x433c0094},
198 {0xc60, 0x00000000}, {0xc64, 0x7112848b},
199 {0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
200 {0xc70, 0x2c7f000d}, {0xc74, 0x018610db},
201 {0xc78, 0x0000001f}, {0xc7c, 0x00b91612},
202 {0xc80, 0x40000100}, {0xc84, 0x20f60000},
203 {0xc88, 0x40000100}, {0xc8c, 0x20200000},
204 {0xc90, 0x00121820}, {0xc94, 0x00000000},
205 {0xc98, 0x00121820}, {0xc9c, 0x00007f7f},
206 {0xca0, 0x00000000}, {0xca4, 0x00000080},
207 {0xca8, 0x00000000}, {0xcac, 0x00000000},
208 {0xcb0, 0x00000000}, {0xcb4, 0x00000000},
209 {0xcb8, 0x00000000}, {0xcbc, 0x28000000},
210 {0xcc0, 0x00000000}, {0xcc4, 0x00000000},
211 {0xcc8, 0x00000000}, {0xccc, 0x00000000},
212 {0xcd0, 0x00000000}, {0xcd4, 0x00000000},
213 {0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
214 {0xce0, 0x00222222}, {0xce4, 0x00000000},
215 {0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
216 {0xd00, 0x00080740}, {0xd04, 0x00020401},
217 {0xd08, 0x0000907f}, {0xd0c, 0x20010201},
218 {0xd10, 0xa0633333}, {0xd14, 0x3333bc43},
219 {0xd18, 0x7a8f5b6b}, {0xd2c, 0xcc979975},
220 {0xd30, 0x00000000}, {0xd34, 0x80608000},
221 {0xd38, 0x00000000}, {0xd3c, 0x00027293},
222 {0xd40, 0x00000000}, {0xd44, 0x00000000},
223 {0xd48, 0x00000000}, {0xd4c, 0x00000000},
224 {0xd50, 0x6437140a}, {0xd54, 0x00000000},
225 {0xd58, 0x00000000}, {0xd5c, 0x30032064},
226 {0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
227 {0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
228 {0xd70, 0x1812362e}, {0xd74, 0x322c2220},
229 {0xd78, 0x000e3c24}, {0xe00, 0x2a2a2a2a},
230 {0xe04, 0x2a2a2a2a}, {0xe08, 0x03902a2a},
231 {0xe10, 0x2a2a2a2a}, {0xe14, 0x2a2a2a2a},
232 {0xe18, 0x2a2a2a2a}, {0xe1c, 0x2a2a2a2a},
233 {0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
234 {0xe34, 0x10008c1f}, {0xe38, 0x02140102},
235 {0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
236 {0xe44, 0x01004800}, {0xe48, 0xfb000000},
237 {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
238 {0xe54, 0x10008c1f}, {0xe58, 0x02140102},
239 {0xe5c, 0x28160d05}, {0xe60, 0x00000008},
240 {0xe68, 0x001b25a4}, {0xe6c, 0x631b25a0},
241 {0xe70, 0x631b25a0}, {0xe74, 0x081b25a0},
242 {0xe78, 0x081b25a0}, {0xe7c, 0x081b25a0},
243 {0xe80, 0x081b25a0}, {0xe84, 0x631b25a0},
244 {0xe88, 0x081b25a0}, {0xe8c, 0x631b25a0},
245 {0xed0, 0x631b25a0}, {0xed4, 0x631b25a0},
246 {0xed8, 0x631b25a0}, {0xedc, 0x001b25a0},
247 {0xee0, 0x001b25a0}, {0xeec, 0x6b1b25a0},
248 {0xf14, 0x00000003}, {0xf4c, 0x00000000},
249 {0xf00, 0x00000300},
250 {0xffff, 0xffffffff},
253 static struct rtl8xxxu_reg32val rtl8192cu_phy_2t_init_table[] = {
254 {0x024, 0x0011800f}, {0x028, 0x00ffdb83},
255 {0x800, 0x80040002}, {0x804, 0x00000003},
256 {0x808, 0x0000fc00}, {0x80c, 0x0000000a},
257 {0x810, 0x10000330}, {0x814, 0x020c3d10},
258 {0x818, 0x02200385}, {0x81c, 0x00000000},
259 {0x820, 0x01000100}, {0x824, 0x00390004},
260 {0x828, 0x01000100}, {0x82c, 0x00390004},
261 {0x830, 0x27272727}, {0x834, 0x27272727},
262 {0x838, 0x27272727}, {0x83c, 0x27272727},
263 {0x840, 0x00010000}, {0x844, 0x00010000},
264 {0x848, 0x27272727}, {0x84c, 0x27272727},
265 {0x850, 0x00000000}, {0x854, 0x00000000},
266 {0x858, 0x569a569a}, {0x85c, 0x0c1b25a4},
267 {0x860, 0x66e60230}, {0x864, 0x061f0130},
268 {0x868, 0x27272727}, {0x86c, 0x2b2b2b27},
269 {0x870, 0x07000700}, {0x874, 0x22184000},
270 {0x878, 0x08080808}, {0x87c, 0x00000000},
271 {0x880, 0xc0083070}, {0x884, 0x000004d5},
272 {0x888, 0x00000000}, {0x88c, 0xcc0000c0},
273 {0x890, 0x00000800}, {0x894, 0xfffffffe},
274 {0x898, 0x40302010}, {0x89c, 0x00706050},
275 {0x900, 0x00000000}, {0x904, 0x00000023},
276 {0x908, 0x00000000}, {0x90c, 0x81121313},
277 {0xa00, 0x00d047c8}, {0xa04, 0x80ff000c},
278 {0xa08, 0x8c838300}, {0xa0c, 0x2e68120f},
279 {0xa10, 0x9500bb78}, {0xa14, 0x11144028},
280 {0xa18, 0x00881117}, {0xa1c, 0x89140f00},
281 {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
282 {0xa28, 0x00000204}, {0xa2c, 0x00d30000},
283 {0xa70, 0x101fbf00}, {0xa74, 0x00000007},
284 {0xc00, 0x48071d40}, {0xc04, 0x03a05633},
285 {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
286 {0xc10, 0x08800000}, {0xc14, 0x40000100},
287 {0xc18, 0x08800000}, {0xc1c, 0x40000100},
288 {0xc20, 0x00000000}, {0xc24, 0x00000000},
289 {0xc28, 0x00000000}, {0xc2c, 0x00000000},
290 {0xc30, 0x69e9ac44}, {0xc34, 0x469652cf},
291 {0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
292 {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
293 {0xc48, 0xec020107}, {0xc4c, 0x007f037f},
294 {0xc50, 0x69543420}, {0xc54, 0x43bc0094},
295 {0xc58, 0x69543420}, {0xc5c, 0x433c0094},
296 {0xc60, 0x00000000}, {0xc64, 0x5116848b},
297 {0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
298 {0xc70, 0x2c7f000d}, {0xc74, 0x2186115b},
299 {0xc78, 0x0000001f}, {0xc7c, 0x00b99612},
300 {0xc80, 0x40000100}, {0xc84, 0x20f60000},
301 {0xc88, 0x40000100}, {0xc8c, 0xa0e40000},
302 {0xc90, 0x00121820}, {0xc94, 0x00000000},
303 {0xc98, 0x00121820}, {0xc9c, 0x00007f7f},
304 {0xca0, 0x00000000}, {0xca4, 0x00000080},
305 {0xca8, 0x00000000}, {0xcac, 0x00000000},
306 {0xcb0, 0x00000000}, {0xcb4, 0x00000000},
307 {0xcb8, 0x00000000}, {0xcbc, 0x28000000},
308 {0xcc0, 0x00000000}, {0xcc4, 0x00000000},
309 {0xcc8, 0x00000000}, {0xccc, 0x00000000},
310 {0xcd0, 0x00000000}, {0xcd4, 0x00000000},
311 {0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
312 {0xce0, 0x00222222}, {0xce4, 0x00000000},
313 {0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
314 {0xd00, 0x00080740}, {0xd04, 0x00020403},
315 {0xd08, 0x0000907f}, {0xd0c, 0x20010201},
316 {0xd10, 0xa0633333}, {0xd14, 0x3333bc43},
317 {0xd18, 0x7a8f5b6b}, {0xd2c, 0xcc979975},
318 {0xd30, 0x00000000}, {0xd34, 0x80608000},
319 {0xd38, 0x00000000}, {0xd3c, 0x00027293},
320 {0xd40, 0x00000000}, {0xd44, 0x00000000},
321 {0xd48, 0x00000000}, {0xd4c, 0x00000000},
322 {0xd50, 0x6437140a}, {0xd54, 0x00000000},
323 {0xd58, 0x00000000}, {0xd5c, 0x30032064},
324 {0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
325 {0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
326 {0xd70, 0x1812362e}, {0xd74, 0x322c2220},
327 {0xd78, 0x000e3c24}, {0xe00, 0x2a2a2a2a},
328 {0xe04, 0x2a2a2a2a}, {0xe08, 0x03902a2a},
329 {0xe10, 0x2a2a2a2a}, {0xe14, 0x2a2a2a2a},
330 {0xe18, 0x2a2a2a2a}, {0xe1c, 0x2a2a2a2a},
331 {0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
332 {0xe34, 0x10008c1f}, {0xe38, 0x02140102},
333 {0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
334 {0xe44, 0x01004800}, {0xe48, 0xfb000000},
335 {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
336 {0xe54, 0x10008c1f}, {0xe58, 0x02140102},
337 {0xe5c, 0x28160d05}, {0xe60, 0x00000010},
338 {0xe68, 0x001b25a4}, {0xe6c, 0x63db25a4},
339 {0xe70, 0x63db25a4}, {0xe74, 0x0c1b25a4},
340 {0xe78, 0x0c1b25a4}, {0xe7c, 0x0c1b25a4},
341 {0xe80, 0x0c1b25a4}, {0xe84, 0x63db25a4},
342 {0xe88, 0x0c1b25a4}, {0xe8c, 0x63db25a4},
343 {0xed0, 0x63db25a4}, {0xed4, 0x63db25a4},
344 {0xed8, 0x63db25a4}, {0xedc, 0x001b25a4},
345 {0xee0, 0x001b25a4}, {0xeec, 0x6fdb25a4},
346 {0xf14, 0x00000003}, {0xf4c, 0x00000000},
347 {0xf00, 0x00000300},
348 {0xffff, 0xffffffff},
351 static struct rtl8xxxu_reg32val rtl8188ru_phy_1t_highpa_table[] = {
352 {0x024, 0x0011800f}, {0x028, 0x00ffdb83},
353 {0x040, 0x000c0004}, {0x800, 0x80040000},
354 {0x804, 0x00000001}, {0x808, 0x0000fc00},
355 {0x80c, 0x0000000a}, {0x810, 0x10005388},
356 {0x814, 0x020c3d10}, {0x818, 0x02200385},
357 {0x81c, 0x00000000}, {0x820, 0x01000100},
358 {0x824, 0x00390204}, {0x828, 0x00000000},
359 {0x82c, 0x00000000}, {0x830, 0x00000000},
360 {0x834, 0x00000000}, {0x838, 0x00000000},
361 {0x83c, 0x00000000}, {0x840, 0x00010000},
362 {0x844, 0x00000000}, {0x848, 0x00000000},
363 {0x84c, 0x00000000}, {0x850, 0x00000000},
364 {0x854, 0x00000000}, {0x858, 0x569a569a},
365 {0x85c, 0x001b25a4}, {0x860, 0x66e60230},
366 {0x864, 0x061f0130}, {0x868, 0x00000000},
367 {0x86c, 0x20202000}, {0x870, 0x03000300},
368 {0x874, 0x22004000}, {0x878, 0x00000808},
369 {0x87c, 0x00ffc3f1}, {0x880, 0xc0083070},
370 {0x884, 0x000004d5}, {0x888, 0x00000000},
371 {0x88c, 0xccc000c0}, {0x890, 0x00000800},
372 {0x894, 0xfffffffe}, {0x898, 0x40302010},
373 {0x89c, 0x00706050}, {0x900, 0x00000000},
374 {0x904, 0x00000023}, {0x908, 0x00000000},
375 {0x90c, 0x81121111}, {0xa00, 0x00d047c8},
376 {0xa04, 0x80ff000c}, {0xa08, 0x8c838300},
377 {0xa0c, 0x2e68120f}, {0xa10, 0x9500bb78},
378 {0xa14, 0x11144028}, {0xa18, 0x00881117},
379 {0xa1c, 0x89140f00}, {0xa20, 0x15160000},
380 {0xa24, 0x070b0f12}, {0xa28, 0x00000104},
381 {0xa2c, 0x00d30000}, {0xa70, 0x101fbf00},
382 {0xa74, 0x00000007}, {0xc00, 0x48071d40},
383 {0xc04, 0x03a05611}, {0xc08, 0x000000e4},
384 {0xc0c, 0x6c6c6c6c}, {0xc10, 0x08800000},
385 {0xc14, 0x40000100}, {0xc18, 0x08800000},
386 {0xc1c, 0x40000100}, {0xc20, 0x00000000},
387 {0xc24, 0x00000000}, {0xc28, 0x00000000},
388 {0xc2c, 0x00000000}, {0xc30, 0x69e9ac44},
389 {0xc34, 0x469652cf}, {0xc38, 0x49795994},
390 {0xc3c, 0x0a97971c}, {0xc40, 0x1f7c403f},
391 {0xc44, 0x000100b7}, {0xc48, 0xec020107},
392 {0xc4c, 0x007f037f}, {0xc50, 0x6954342e},
393 {0xc54, 0x43bc0094}, {0xc58, 0x6954342f},
394 {0xc5c, 0x433c0094}, {0xc60, 0x00000000},
395 {0xc64, 0x5116848b}, {0xc68, 0x47c00bff},
396 {0xc6c, 0x00000036}, {0xc70, 0x2c46000d},
397 {0xc74, 0x018610db}, {0xc78, 0x0000001f},
398 {0xc7c, 0x00b91612}, {0xc80, 0x24000090},
399 {0xc84, 0x20f60000}, {0xc88, 0x24000090},
400 {0xc8c, 0x20200000}, {0xc90, 0x00121820},
401 {0xc94, 0x00000000}, {0xc98, 0x00121820},
402 {0xc9c, 0x00007f7f}, {0xca0, 0x00000000},
403 {0xca4, 0x00000080}, {0xca8, 0x00000000},
404 {0xcac, 0x00000000}, {0xcb0, 0x00000000},
405 {0xcb4, 0x00000000}, {0xcb8, 0x00000000},
406 {0xcbc, 0x28000000}, {0xcc0, 0x00000000},
407 {0xcc4, 0x00000000}, {0xcc8, 0x00000000},
408 {0xccc, 0x00000000}, {0xcd0, 0x00000000},
409 {0xcd4, 0x00000000}, {0xcd8, 0x64b22427},
410 {0xcdc, 0x00766932}, {0xce0, 0x00222222},
411 {0xce4, 0x00000000}, {0xce8, 0x37644302},
412 {0xcec, 0x2f97d40c}, {0xd00, 0x00080740},
413 {0xd04, 0x00020401}, {0xd08, 0x0000907f},
414 {0xd0c, 0x20010201}, {0xd10, 0xa0633333},
415 {0xd14, 0x3333bc43}, {0xd18, 0x7a8f5b6b},
416 {0xd2c, 0xcc979975}, {0xd30, 0x00000000},
417 {0xd34, 0x80608000}, {0xd38, 0x00000000},
418 {0xd3c, 0x00027293}, {0xd40, 0x00000000},
419 {0xd44, 0x00000000}, {0xd48, 0x00000000},
420 {0xd4c, 0x00000000}, {0xd50, 0x6437140a},
421 {0xd54, 0x00000000}, {0xd58, 0x00000000},
422 {0xd5c, 0x30032064}, {0xd60, 0x4653de68},
423 {0xd64, 0x04518a3c}, {0xd68, 0x00002101},
424 {0xd6c, 0x2a201c16}, {0xd70, 0x1812362e},
425 {0xd74, 0x322c2220}, {0xd78, 0x000e3c24},
426 {0xe00, 0x24242424}, {0xe04, 0x24242424},
427 {0xe08, 0x03902024}, {0xe10, 0x24242424},
428 {0xe14, 0x24242424}, {0xe18, 0x24242424},
429 {0xe1c, 0x24242424}, {0xe28, 0x00000000},
430 {0xe30, 0x1000dc1f}, {0xe34, 0x10008c1f},
431 {0xe38, 0x02140102}, {0xe3c, 0x681604c2},
432 {0xe40, 0x01007c00}, {0xe44, 0x01004800},
433 {0xe48, 0xfb000000}, {0xe4c, 0x000028d1},
434 {0xe50, 0x1000dc1f}, {0xe54, 0x10008c1f},
435 {0xe58, 0x02140102}, {0xe5c, 0x28160d05},
436 {0xe60, 0x00000008}, {0xe68, 0x001b25a4},
437 {0xe6c, 0x631b25a0}, {0xe70, 0x631b25a0},
438 {0xe74, 0x081b25a0}, {0xe78, 0x081b25a0},
439 {0xe7c, 0x081b25a0}, {0xe80, 0x081b25a0},
440 {0xe84, 0x631b25a0}, {0xe88, 0x081b25a0},
441 {0xe8c, 0x631b25a0}, {0xed0, 0x631b25a0},
442 {0xed4, 0x631b25a0}, {0xed8, 0x631b25a0},
443 {0xedc, 0x001b25a0}, {0xee0, 0x001b25a0},
444 {0xeec, 0x6b1b25a0}, {0xee8, 0x31555448},
445 {0xf14, 0x00000003}, {0xf4c, 0x00000000},
446 {0xf00, 0x00000300},
447 {0xffff, 0xffffffff},
450 static struct rtl8xxxu_reg32val rtl8xxx_agc_standard_table[] = {
451 {0xc78, 0x7b000001}, {0xc78, 0x7b010001},
452 {0xc78, 0x7b020001}, {0xc78, 0x7b030001},
453 {0xc78, 0x7b040001}, {0xc78, 0x7b050001},
454 {0xc78, 0x7a060001}, {0xc78, 0x79070001},
455 {0xc78, 0x78080001}, {0xc78, 0x77090001},
456 {0xc78, 0x760a0001}, {0xc78, 0x750b0001},
457 {0xc78, 0x740c0001}, {0xc78, 0x730d0001},
458 {0xc78, 0x720e0001}, {0xc78, 0x710f0001},
459 {0xc78, 0x70100001}, {0xc78, 0x6f110001},
460 {0xc78, 0x6e120001}, {0xc78, 0x6d130001},
461 {0xc78, 0x6c140001}, {0xc78, 0x6b150001},
462 {0xc78, 0x6a160001}, {0xc78, 0x69170001},
463 {0xc78, 0x68180001}, {0xc78, 0x67190001},
464 {0xc78, 0x661a0001}, {0xc78, 0x651b0001},
465 {0xc78, 0x641c0001}, {0xc78, 0x631d0001},
466 {0xc78, 0x621e0001}, {0xc78, 0x611f0001},
467 {0xc78, 0x60200001}, {0xc78, 0x49210001},
468 {0xc78, 0x48220001}, {0xc78, 0x47230001},
469 {0xc78, 0x46240001}, {0xc78, 0x45250001},
470 {0xc78, 0x44260001}, {0xc78, 0x43270001},
471 {0xc78, 0x42280001}, {0xc78, 0x41290001},
472 {0xc78, 0x402a0001}, {0xc78, 0x262b0001},
473 {0xc78, 0x252c0001}, {0xc78, 0x242d0001},
474 {0xc78, 0x232e0001}, {0xc78, 0x222f0001},
475 {0xc78, 0x21300001}, {0xc78, 0x20310001},
476 {0xc78, 0x06320001}, {0xc78, 0x05330001},
477 {0xc78, 0x04340001}, {0xc78, 0x03350001},
478 {0xc78, 0x02360001}, {0xc78, 0x01370001},
479 {0xc78, 0x00380001}, {0xc78, 0x00390001},
480 {0xc78, 0x003a0001}, {0xc78, 0x003b0001},
481 {0xc78, 0x003c0001}, {0xc78, 0x003d0001},
482 {0xc78, 0x003e0001}, {0xc78, 0x003f0001},
483 {0xc78, 0x7b400001}, {0xc78, 0x7b410001},
484 {0xc78, 0x7b420001}, {0xc78, 0x7b430001},
485 {0xc78, 0x7b440001}, {0xc78, 0x7b450001},
486 {0xc78, 0x7a460001}, {0xc78, 0x79470001},
487 {0xc78, 0x78480001}, {0xc78, 0x77490001},
488 {0xc78, 0x764a0001}, {0xc78, 0x754b0001},
489 {0xc78, 0x744c0001}, {0xc78, 0x734d0001},
490 {0xc78, 0x724e0001}, {0xc78, 0x714f0001},
491 {0xc78, 0x70500001}, {0xc78, 0x6f510001},
492 {0xc78, 0x6e520001}, {0xc78, 0x6d530001},
493 {0xc78, 0x6c540001}, {0xc78, 0x6b550001},
494 {0xc78, 0x6a560001}, {0xc78, 0x69570001},
495 {0xc78, 0x68580001}, {0xc78, 0x67590001},
496 {0xc78, 0x665a0001}, {0xc78, 0x655b0001},
497 {0xc78, 0x645c0001}, {0xc78, 0x635d0001},
498 {0xc78, 0x625e0001}, {0xc78, 0x615f0001},
499 {0xc78, 0x60600001}, {0xc78, 0x49610001},
500 {0xc78, 0x48620001}, {0xc78, 0x47630001},
501 {0xc78, 0x46640001}, {0xc78, 0x45650001},
502 {0xc78, 0x44660001}, {0xc78, 0x43670001},
503 {0xc78, 0x42680001}, {0xc78, 0x41690001},
504 {0xc78, 0x406a0001}, {0xc78, 0x266b0001},
505 {0xc78, 0x256c0001}, {0xc78, 0x246d0001},
506 {0xc78, 0x236e0001}, {0xc78, 0x226f0001},
507 {0xc78, 0x21700001}, {0xc78, 0x20710001},
508 {0xc78, 0x06720001}, {0xc78, 0x05730001},
509 {0xc78, 0x04740001}, {0xc78, 0x03750001},
510 {0xc78, 0x02760001}, {0xc78, 0x01770001},
511 {0xc78, 0x00780001}, {0xc78, 0x00790001},
512 {0xc78, 0x007a0001}, {0xc78, 0x007b0001},
513 {0xc78, 0x007c0001}, {0xc78, 0x007d0001},
514 {0xc78, 0x007e0001}, {0xc78, 0x007f0001},
515 {0xc78, 0x3800001e}, {0xc78, 0x3801001e},
516 {0xc78, 0x3802001e}, {0xc78, 0x3803001e},
517 {0xc78, 0x3804001e}, {0xc78, 0x3805001e},
518 {0xc78, 0x3806001e}, {0xc78, 0x3807001e},
519 {0xc78, 0x3808001e}, {0xc78, 0x3c09001e},
520 {0xc78, 0x3e0a001e}, {0xc78, 0x400b001e},
521 {0xc78, 0x440c001e}, {0xc78, 0x480d001e},
522 {0xc78, 0x4c0e001e}, {0xc78, 0x500f001e},
523 {0xc78, 0x5210001e}, {0xc78, 0x5611001e},
524 {0xc78, 0x5a12001e}, {0xc78, 0x5e13001e},
525 {0xc78, 0x6014001e}, {0xc78, 0x6015001e},
526 {0xc78, 0x6016001e}, {0xc78, 0x6217001e},
527 {0xc78, 0x6218001e}, {0xc78, 0x6219001e},
528 {0xc78, 0x621a001e}, {0xc78, 0x621b001e},
529 {0xc78, 0x621c001e}, {0xc78, 0x621d001e},
530 {0xc78, 0x621e001e}, {0xc78, 0x621f001e},
531 {0xffff, 0xffffffff}
534 static struct rtl8xxxu_reg32val rtl8xxx_agc_highpa_table[] = {
535 {0xc78, 0x7b000001}, {0xc78, 0x7b010001},
536 {0xc78, 0x7b020001}, {0xc78, 0x7b030001},
537 {0xc78, 0x7b040001}, {0xc78, 0x7b050001},
538 {0xc78, 0x7b060001}, {0xc78, 0x7b070001},
539 {0xc78, 0x7b080001}, {0xc78, 0x7a090001},
540 {0xc78, 0x790a0001}, {0xc78, 0x780b0001},
541 {0xc78, 0x770c0001}, {0xc78, 0x760d0001},
542 {0xc78, 0x750e0001}, {0xc78, 0x740f0001},
543 {0xc78, 0x73100001}, {0xc78, 0x72110001},
544 {0xc78, 0x71120001}, {0xc78, 0x70130001},
545 {0xc78, 0x6f140001}, {0xc78, 0x6e150001},
546 {0xc78, 0x6d160001}, {0xc78, 0x6c170001},
547 {0xc78, 0x6b180001}, {0xc78, 0x6a190001},
548 {0xc78, 0x691a0001}, {0xc78, 0x681b0001},
549 {0xc78, 0x671c0001}, {0xc78, 0x661d0001},
550 {0xc78, 0x651e0001}, {0xc78, 0x641f0001},
551 {0xc78, 0x63200001}, {0xc78, 0x62210001},
552 {0xc78, 0x61220001}, {0xc78, 0x60230001},
553 {0xc78, 0x46240001}, {0xc78, 0x45250001},
554 {0xc78, 0x44260001}, {0xc78, 0x43270001},
555 {0xc78, 0x42280001}, {0xc78, 0x41290001},
556 {0xc78, 0x402a0001}, {0xc78, 0x262b0001},
557 {0xc78, 0x252c0001}, {0xc78, 0x242d0001},
558 {0xc78, 0x232e0001}, {0xc78, 0x222f0001},
559 {0xc78, 0x21300001}, {0xc78, 0x20310001},
560 {0xc78, 0x06320001}, {0xc78, 0x05330001},
561 {0xc78, 0x04340001}, {0xc78, 0x03350001},
562 {0xc78, 0x02360001}, {0xc78, 0x01370001},
563 {0xc78, 0x00380001}, {0xc78, 0x00390001},
564 {0xc78, 0x003a0001}, {0xc78, 0x003b0001},
565 {0xc78, 0x003c0001}, {0xc78, 0x003d0001},
566 {0xc78, 0x003e0001}, {0xc78, 0x003f0001},
567 {0xc78, 0x7b400001}, {0xc78, 0x7b410001},
568 {0xc78, 0x7b420001}, {0xc78, 0x7b430001},
569 {0xc78, 0x7b440001}, {0xc78, 0x7b450001},
570 {0xc78, 0x7b460001}, {0xc78, 0x7b470001},
571 {0xc78, 0x7b480001}, {0xc78, 0x7a490001},
572 {0xc78, 0x794a0001}, {0xc78, 0x784b0001},
573 {0xc78, 0x774c0001}, {0xc78, 0x764d0001},
574 {0xc78, 0x754e0001}, {0xc78, 0x744f0001},
575 {0xc78, 0x73500001}, {0xc78, 0x72510001},
576 {0xc78, 0x71520001}, {0xc78, 0x70530001},
577 {0xc78, 0x6f540001}, {0xc78, 0x6e550001},
578 {0xc78, 0x6d560001}, {0xc78, 0x6c570001},
579 {0xc78, 0x6b580001}, {0xc78, 0x6a590001},
580 {0xc78, 0x695a0001}, {0xc78, 0x685b0001},
581 {0xc78, 0x675c0001}, {0xc78, 0x665d0001},
582 {0xc78, 0x655e0001}, {0xc78, 0x645f0001},
583 {0xc78, 0x63600001}, {0xc78, 0x62610001},
584 {0xc78, 0x61620001}, {0xc78, 0x60630001},
585 {0xc78, 0x46640001}, {0xc78, 0x45650001},
586 {0xc78, 0x44660001}, {0xc78, 0x43670001},
587 {0xc78, 0x42680001}, {0xc78, 0x41690001},
588 {0xc78, 0x406a0001}, {0xc78, 0x266b0001},
589 {0xc78, 0x256c0001}, {0xc78, 0x246d0001},
590 {0xc78, 0x236e0001}, {0xc78, 0x226f0001},
591 {0xc78, 0x21700001}, {0xc78, 0x20710001},
592 {0xc78, 0x06720001}, {0xc78, 0x05730001},
593 {0xc78, 0x04740001}, {0xc78, 0x03750001},
594 {0xc78, 0x02760001}, {0xc78, 0x01770001},
595 {0xc78, 0x00780001}, {0xc78, 0x00790001},
596 {0xc78, 0x007a0001}, {0xc78, 0x007b0001},
597 {0xc78, 0x007c0001}, {0xc78, 0x007d0001},
598 {0xc78, 0x007e0001}, {0xc78, 0x007f0001},
599 {0xc78, 0x3800001e}, {0xc78, 0x3801001e},
600 {0xc78, 0x3802001e}, {0xc78, 0x3803001e},
601 {0xc78, 0x3804001e}, {0xc78, 0x3805001e},
602 {0xc78, 0x3806001e}, {0xc78, 0x3807001e},
603 {0xc78, 0x3808001e}, {0xc78, 0x3c09001e},
604 {0xc78, 0x3e0a001e}, {0xc78, 0x400b001e},
605 {0xc78, 0x440c001e}, {0xc78, 0x480d001e},
606 {0xc78, 0x4c0e001e}, {0xc78, 0x500f001e},
607 {0xc78, 0x5210001e}, {0xc78, 0x5611001e},
608 {0xc78, 0x5a12001e}, {0xc78, 0x5e13001e},
609 {0xc78, 0x6014001e}, {0xc78, 0x6015001e},
610 {0xc78, 0x6016001e}, {0xc78, 0x6217001e},
611 {0xc78, 0x6218001e}, {0xc78, 0x6219001e},
612 {0xc78, 0x621a001e}, {0xc78, 0x621b001e},
613 {0xc78, 0x621c001e}, {0xc78, 0x621d001e},
614 {0xc78, 0x621e001e}, {0xc78, 0x621f001e},
615 {0xffff, 0xffffffff}
618 static struct rtl8xxxu_rfregs rtl8xxxu_rfregs[] = {
619 { /* RF_A */
620 .hssiparm1 = REG_FPGA0_XA_HSSI_PARM1,
621 .hssiparm2 = REG_FPGA0_XA_HSSI_PARM2,
622 .lssiparm = REG_FPGA0_XA_LSSI_PARM,
623 .hspiread = REG_HSPI_XA_READBACK,
624 .lssiread = REG_FPGA0_XA_LSSI_READBACK,
625 .rf_sw_ctrl = REG_FPGA0_XA_RF_SW_CTRL,
627 { /* RF_B */
628 .hssiparm1 = REG_FPGA0_XB_HSSI_PARM1,
629 .hssiparm2 = REG_FPGA0_XB_HSSI_PARM2,
630 .lssiparm = REG_FPGA0_XB_LSSI_PARM,
631 .hspiread = REG_HSPI_XB_READBACK,
632 .lssiread = REG_FPGA0_XB_LSSI_READBACK,
633 .rf_sw_ctrl = REG_FPGA0_XB_RF_SW_CTRL,
637 const u32 rtl8xxxu_iqk_phy_iq_bb_reg[RTL8XXXU_BB_REGS] = {
638 REG_OFDM0_XA_RX_IQ_IMBALANCE,
639 REG_OFDM0_XB_RX_IQ_IMBALANCE,
640 REG_OFDM0_ENERGY_CCA_THRES,
641 REG_OFDM0_AGCR_SSI_TABLE,
642 REG_OFDM0_XA_TX_IQ_IMBALANCE,
643 REG_OFDM0_XB_TX_IQ_IMBALANCE,
644 REG_OFDM0_XC_TX_AFE,
645 REG_OFDM0_XD_TX_AFE,
646 REG_OFDM0_RX_IQ_EXT_ANTA
649 u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr)
651 struct usb_device *udev = priv->udev;
652 int len;
653 u8 data;
655 mutex_lock(&priv->usb_buf_mutex);
656 len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
657 REALTEK_USB_CMD_REQ, REALTEK_USB_READ,
658 addr, 0, &priv->usb_buf.val8, sizeof(u8),
659 RTW_USB_CONTROL_MSG_TIMEOUT);
660 data = priv->usb_buf.val8;
661 mutex_unlock(&priv->usb_buf_mutex);
663 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ)
664 dev_info(&udev->dev, "%s(%04x) = 0x%02x, len %i\n",
665 __func__, addr, data, len);
666 return data;
669 u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr)
671 struct usb_device *udev = priv->udev;
672 int len;
673 u16 data;
675 mutex_lock(&priv->usb_buf_mutex);
676 len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
677 REALTEK_USB_CMD_REQ, REALTEK_USB_READ,
678 addr, 0, &priv->usb_buf.val16, sizeof(u16),
679 RTW_USB_CONTROL_MSG_TIMEOUT);
680 data = le16_to_cpu(priv->usb_buf.val16);
681 mutex_unlock(&priv->usb_buf_mutex);
683 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ)
684 dev_info(&udev->dev, "%s(%04x) = 0x%04x, len %i\n",
685 __func__, addr, data, len);
686 return data;
689 u32 rtl8xxxu_read32(struct rtl8xxxu_priv *priv, u16 addr)
691 struct usb_device *udev = priv->udev;
692 int len;
693 u32 data;
695 mutex_lock(&priv->usb_buf_mutex);
696 len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
697 REALTEK_USB_CMD_REQ, REALTEK_USB_READ,
698 addr, 0, &priv->usb_buf.val32, sizeof(u32),
699 RTW_USB_CONTROL_MSG_TIMEOUT);
700 data = le32_to_cpu(priv->usb_buf.val32);
701 mutex_unlock(&priv->usb_buf_mutex);
703 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ)
704 dev_info(&udev->dev, "%s(%04x) = 0x%08x, len %i\n",
705 __func__, addr, data, len);
706 return data;
709 int rtl8xxxu_write8(struct rtl8xxxu_priv *priv, u16 addr, u8 val)
711 struct usb_device *udev = priv->udev;
712 int ret;
714 mutex_lock(&priv->usb_buf_mutex);
715 priv->usb_buf.val8 = val;
716 ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
717 REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
718 addr, 0, &priv->usb_buf.val8, sizeof(u8),
719 RTW_USB_CONTROL_MSG_TIMEOUT);
721 mutex_unlock(&priv->usb_buf_mutex);
723 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE)
724 dev_info(&udev->dev, "%s(%04x) = 0x%02x\n",
725 __func__, addr, val);
726 return ret;
729 int rtl8xxxu_write16(struct rtl8xxxu_priv *priv, u16 addr, u16 val)
731 struct usb_device *udev = priv->udev;
732 int ret;
734 mutex_lock(&priv->usb_buf_mutex);
735 priv->usb_buf.val16 = cpu_to_le16(val);
736 ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
737 REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
738 addr, 0, &priv->usb_buf.val16, sizeof(u16),
739 RTW_USB_CONTROL_MSG_TIMEOUT);
740 mutex_unlock(&priv->usb_buf_mutex);
742 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE)
743 dev_info(&udev->dev, "%s(%04x) = 0x%04x\n",
744 __func__, addr, val);
745 return ret;
748 int rtl8xxxu_write32(struct rtl8xxxu_priv *priv, u16 addr, u32 val)
750 struct usb_device *udev = priv->udev;
751 int ret;
753 mutex_lock(&priv->usb_buf_mutex);
754 priv->usb_buf.val32 = cpu_to_le32(val);
755 ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
756 REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
757 addr, 0, &priv->usb_buf.val32, sizeof(u32),
758 RTW_USB_CONTROL_MSG_TIMEOUT);
759 mutex_unlock(&priv->usb_buf_mutex);
761 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE)
762 dev_info(&udev->dev, "%s(%04x) = 0x%08x\n",
763 __func__, addr, val);
764 return ret;
767 static int
768 rtl8xxxu_writeN(struct rtl8xxxu_priv *priv, u16 addr, u8 *buf, u16 len)
770 struct usb_device *udev = priv->udev;
771 int blocksize = priv->fops->writeN_block_size;
772 int ret, i, count, remainder;
774 count = len / blocksize;
775 remainder = len % blocksize;
777 for (i = 0; i < count; i++) {
778 ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
779 REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
780 addr, 0, buf, blocksize,
781 RTW_USB_CONTROL_MSG_TIMEOUT);
782 if (ret != blocksize)
783 goto write_error;
785 addr += blocksize;
786 buf += blocksize;
789 if (remainder) {
790 ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
791 REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
792 addr, 0, buf, remainder,
793 RTW_USB_CONTROL_MSG_TIMEOUT);
794 if (ret != remainder)
795 goto write_error;
798 return len;
800 write_error:
801 dev_info(&udev->dev,
802 "%s: Failed to write block at addr: %04x size: %04x\n",
803 __func__, addr, blocksize);
804 return -EAGAIN;
807 u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv,
808 enum rtl8xxxu_rfpath path, u8 reg)
810 u32 hssia, val32, retval;
812 hssia = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM2);
813 if (path != RF_A)
814 val32 = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hssiparm2);
815 else
816 val32 = hssia;
818 val32 &= ~FPGA0_HSSI_PARM2_ADDR_MASK;
819 val32 |= (reg << FPGA0_HSSI_PARM2_ADDR_SHIFT);
820 val32 |= FPGA0_HSSI_PARM2_EDGE_READ;
821 hssia &= ~FPGA0_HSSI_PARM2_EDGE_READ;
822 rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM2, hssia);
824 udelay(10);
826 rtl8xxxu_write32(priv, rtl8xxxu_rfregs[path].hssiparm2, val32);
827 udelay(100);
829 hssia |= FPGA0_HSSI_PARM2_EDGE_READ;
830 rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM2, hssia);
831 udelay(10);
833 val32 = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hssiparm1);
834 if (val32 & FPGA0_HSSI_PARM1_PI)
835 retval = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hspiread);
836 else
837 retval = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].lssiread);
839 retval &= 0xfffff;
841 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_RFREG_READ)
842 dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n",
843 __func__, reg, retval);
844 return retval;
848 * The RTL8723BU driver indicates that registers 0xb2 and 0xb6 can
849 * have write issues in high temperature conditions. We may have to
850 * retry writing them.
852 int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv,
853 enum rtl8xxxu_rfpath path, u8 reg, u32 data)
855 int ret, retval;
856 u32 dataaddr, val32;
858 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_RFREG_WRITE)
859 dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n",
860 __func__, reg, data);
862 data &= FPGA0_LSSI_PARM_DATA_MASK;
863 dataaddr = (reg << FPGA0_LSSI_PARM_ADDR_SHIFT) | data;
865 if (priv->rtl_chip == RTL8192E) {
866 val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
867 val32 &= ~0x20000;
868 rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
871 /* Use XB for path B */
872 ret = rtl8xxxu_write32(priv, rtl8xxxu_rfregs[path].lssiparm, dataaddr);
873 if (ret != sizeof(dataaddr))
874 retval = -EIO;
875 else
876 retval = 0;
878 udelay(1);
880 if (priv->rtl_chip == RTL8192E) {
881 val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
882 val32 |= 0x20000;
883 rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
886 return retval;
889 static int
890 rtl8xxxu_gen1_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len)
892 struct device *dev = &priv->udev->dev;
893 int mbox_nr, retry, retval = 0;
894 int mbox_reg, mbox_ext_reg;
895 u8 val8;
897 mutex_lock(&priv->h2c_mutex);
899 mbox_nr = priv->next_mbox;
900 mbox_reg = REG_HMBOX_0 + (mbox_nr * 4);
901 mbox_ext_reg = REG_HMBOX_EXT_0 + (mbox_nr * 2);
904 * MBOX ready?
906 retry = 100;
907 do {
908 val8 = rtl8xxxu_read8(priv, REG_HMTFR);
909 if (!(val8 & BIT(mbox_nr)))
910 break;
911 } while (retry--);
913 if (!retry) {
914 dev_info(dev, "%s: Mailbox busy\n", __func__);
915 retval = -EBUSY;
916 goto error;
920 * Need to swap as it's being swapped again by rtl8xxxu_write16/32()
922 if (len > sizeof(u32)) {
923 rtl8xxxu_write16(priv, mbox_ext_reg, le16_to_cpu(h2c->raw.ext));
924 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
925 dev_info(dev, "H2C_EXT %04x\n",
926 le16_to_cpu(h2c->raw.ext));
928 rtl8xxxu_write32(priv, mbox_reg, le32_to_cpu(h2c->raw.data));
929 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
930 dev_info(dev, "H2C %08x\n", le32_to_cpu(h2c->raw.data));
932 priv->next_mbox = (mbox_nr + 1) % H2C_MAX_MBOX;
934 error:
935 mutex_unlock(&priv->h2c_mutex);
936 return retval;
940 rtl8xxxu_gen2_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len)
942 struct device *dev = &priv->udev->dev;
943 int mbox_nr, retry, retval = 0;
944 int mbox_reg, mbox_ext_reg;
945 u8 val8;
947 mutex_lock(&priv->h2c_mutex);
949 mbox_nr = priv->next_mbox;
950 mbox_reg = REG_HMBOX_0 + (mbox_nr * 4);
951 mbox_ext_reg = REG_HMBOX_EXT0_8723B + (mbox_nr * 4);
954 * MBOX ready?
956 retry = 100;
957 do {
958 val8 = rtl8xxxu_read8(priv, REG_HMTFR);
959 if (!(val8 & BIT(mbox_nr)))
960 break;
961 } while (retry--);
963 if (!retry) {
964 dev_info(dev, "%s: Mailbox busy\n", __func__);
965 retval = -EBUSY;
966 goto error;
970 * Need to swap as it's being swapped again by rtl8xxxu_write16/32()
972 if (len > sizeof(u32)) {
973 rtl8xxxu_write32(priv, mbox_ext_reg,
974 le32_to_cpu(h2c->raw_wide.ext));
975 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
976 dev_info(dev, "H2C_EXT %08x\n",
977 le32_to_cpu(h2c->raw_wide.ext));
979 rtl8xxxu_write32(priv, mbox_reg, le32_to_cpu(h2c->raw.data));
980 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
981 dev_info(dev, "H2C %08x\n", le32_to_cpu(h2c->raw.data));
983 priv->next_mbox = (mbox_nr + 1) % H2C_MAX_MBOX;
985 error:
986 mutex_unlock(&priv->h2c_mutex);
987 return retval;
990 void rtl8xxxu_gen1_enable_rf(struct rtl8xxxu_priv *priv)
992 u8 val8;
993 u32 val32;
995 val8 = rtl8xxxu_read8(priv, REG_SPS0_CTRL);
996 val8 |= BIT(0) | BIT(3);
997 rtl8xxxu_write8(priv, REG_SPS0_CTRL, val8);
999 val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_PARM);
1000 val32 &= ~(BIT(4) | BIT(5));
1001 val32 |= BIT(3);
1002 if (priv->rf_paths == 2) {
1003 val32 &= ~(BIT(20) | BIT(21));
1004 val32 |= BIT(19);
1006 rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_PARM, val32);
1008 val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
1009 val32 &= ~OFDM_RF_PATH_TX_MASK;
1010 if (priv->tx_paths == 2)
1011 val32 |= OFDM_RF_PATH_TX_A | OFDM_RF_PATH_TX_B;
1012 else if (priv->rtl_chip == RTL8192C || priv->rtl_chip == RTL8191C)
1013 val32 |= OFDM_RF_PATH_TX_B;
1014 else
1015 val32 |= OFDM_RF_PATH_TX_A;
1016 rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
1018 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
1019 val32 &= ~FPGA_RF_MODE_JAPAN;
1020 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
1022 if (priv->rf_paths == 2)
1023 rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x63db25a0);
1024 else
1025 rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x631b25a0);
1027 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x32d95);
1028 if (priv->rf_paths == 2)
1029 rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x32d95);
1031 rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
1034 void rtl8xxxu_gen1_disable_rf(struct rtl8xxxu_priv *priv)
1036 u8 sps0;
1037 u32 val32;
1039 sps0 = rtl8xxxu_read8(priv, REG_SPS0_CTRL);
1041 /* RF RX code for preamble power saving */
1042 val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_PARM);
1043 val32 &= ~(BIT(3) | BIT(4) | BIT(5));
1044 if (priv->rf_paths == 2)
1045 val32 &= ~(BIT(19) | BIT(20) | BIT(21));
1046 rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_PARM, val32);
1048 /* Disable TX for four paths */
1049 val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
1050 val32 &= ~OFDM_RF_PATH_TX_MASK;
1051 rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
1053 /* Enable power saving */
1054 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
1055 val32 |= FPGA_RF_MODE_JAPAN;
1056 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
1058 /* AFE control register to power down bits [30:22] */
1059 if (priv->rf_paths == 2)
1060 rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x00db25a0);
1061 else
1062 rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x001b25a0);
1064 /* Power down RF module */
1065 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0);
1066 if (priv->rf_paths == 2)
1067 rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0);
1069 sps0 &= ~(BIT(0) | BIT(3));
1070 rtl8xxxu_write8(priv, REG_SPS0_CTRL, sps0);
1073 static void rtl8xxxu_stop_tx_beacon(struct rtl8xxxu_priv *priv)
1075 u8 val8;
1077 val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL + 2);
1078 val8 &= ~BIT(6);
1079 rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL + 2, val8);
1081 rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 1, 0x64);
1082 val8 = rtl8xxxu_read8(priv, REG_TBTT_PROHIBIT + 2);
1083 val8 &= ~BIT(0);
1084 rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 2, val8);
1089 * The rtl8723a has 3 channel groups for it's efuse settings. It only
1090 * supports the 2.4GHz band, so channels 1 - 14:
1091 * group 0: channels 1 - 3
1092 * group 1: channels 4 - 9
1093 * group 2: channels 10 - 14
1095 * Note: We index from 0 in the code
1097 static int rtl8xxxu_gen1_channel_to_group(int channel)
1099 int group;
1101 if (channel < 4)
1102 group = 0;
1103 else if (channel < 10)
1104 group = 1;
1105 else
1106 group = 2;
1108 return group;
1112 * Valid for rtl8723bu and rtl8192eu
1114 int rtl8xxxu_gen2_channel_to_group(int channel)
1116 int group;
1118 if (channel < 3)
1119 group = 0;
1120 else if (channel < 6)
1121 group = 1;
1122 else if (channel < 9)
1123 group = 2;
1124 else if (channel < 12)
1125 group = 3;
1126 else
1127 group = 4;
1129 return group;
1132 void rtl8xxxu_gen1_config_channel(struct ieee80211_hw *hw)
1134 struct rtl8xxxu_priv *priv = hw->priv;
1135 u32 val32, rsr;
1136 u8 val8, opmode;
1137 bool ht = true;
1138 int sec_ch_above, channel;
1139 int i;
1141 opmode = rtl8xxxu_read8(priv, REG_BW_OPMODE);
1142 rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
1143 channel = hw->conf.chandef.chan->hw_value;
1145 switch (hw->conf.chandef.width) {
1146 case NL80211_CHAN_WIDTH_20_NOHT:
1147 ht = false;
1148 /* fall through */
1149 case NL80211_CHAN_WIDTH_20:
1150 opmode |= BW_OPMODE_20MHZ;
1151 rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
1153 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
1154 val32 &= ~FPGA_RF_MODE;
1155 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
1157 val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
1158 val32 &= ~FPGA_RF_MODE;
1159 rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
1161 val32 = rtl8xxxu_read32(priv, REG_FPGA0_ANALOG2);
1162 val32 |= FPGA0_ANALOG2_20MHZ;
1163 rtl8xxxu_write32(priv, REG_FPGA0_ANALOG2, val32);
1164 break;
1165 case NL80211_CHAN_WIDTH_40:
1166 if (hw->conf.chandef.center_freq1 >
1167 hw->conf.chandef.chan->center_freq) {
1168 sec_ch_above = 1;
1169 channel += 2;
1170 } else {
1171 sec_ch_above = 0;
1172 channel -= 2;
1175 opmode &= ~BW_OPMODE_20MHZ;
1176 rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
1177 rsr &= ~RSR_RSC_BANDWIDTH_40M;
1178 if (sec_ch_above)
1179 rsr |= RSR_RSC_UPPER_SUB_CHANNEL;
1180 else
1181 rsr |= RSR_RSC_LOWER_SUB_CHANNEL;
1182 rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, rsr);
1184 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
1185 val32 |= FPGA_RF_MODE;
1186 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
1188 val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
1189 val32 |= FPGA_RF_MODE;
1190 rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
1193 * Set Control channel to upper or lower. These settings
1194 * are required only for 40MHz
1196 val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
1197 val32 &= ~CCK0_SIDEBAND;
1198 if (!sec_ch_above)
1199 val32 |= CCK0_SIDEBAND;
1200 rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
1202 val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
1203 val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */
1204 if (sec_ch_above)
1205 val32 |= OFDM_LSTF_PRIME_CH_LOW;
1206 else
1207 val32 |= OFDM_LSTF_PRIME_CH_HIGH;
1208 rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
1210 val32 = rtl8xxxu_read32(priv, REG_FPGA0_ANALOG2);
1211 val32 &= ~FPGA0_ANALOG2_20MHZ;
1212 rtl8xxxu_write32(priv, REG_FPGA0_ANALOG2, val32);
1214 val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
1215 val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL);
1216 if (sec_ch_above)
1217 val32 |= FPGA0_PS_UPPER_CHANNEL;
1218 else
1219 val32 |= FPGA0_PS_LOWER_CHANNEL;
1220 rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
1221 break;
1223 default:
1224 break;
1227 for (i = RF_A; i < priv->rf_paths; i++) {
1228 val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
1229 val32 &= ~MODE_AG_CHANNEL_MASK;
1230 val32 |= channel;
1231 rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
1234 if (ht)
1235 val8 = 0x0e;
1236 else
1237 val8 = 0x0a;
1239 rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8);
1240 rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8);
1242 rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808);
1243 rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a);
1245 for (i = RF_A; i < priv->rf_paths; i++) {
1246 val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
1247 if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
1248 val32 &= ~MODE_AG_CHANNEL_20MHZ;
1249 else
1250 val32 |= MODE_AG_CHANNEL_20MHZ;
1251 rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
1255 void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw)
1257 struct rtl8xxxu_priv *priv = hw->priv;
1258 u32 val32;
1259 u8 val8, subchannel;
1260 u16 rf_mode_bw;
1261 bool ht = true;
1262 int sec_ch_above, channel;
1263 int i;
1265 rf_mode_bw = rtl8xxxu_read16(priv, REG_WMAC_TRXPTCL_CTL);
1266 rf_mode_bw &= ~WMAC_TRXPTCL_CTL_BW_MASK;
1267 channel = hw->conf.chandef.chan->hw_value;
1269 /* Hack */
1270 subchannel = 0;
1272 switch (hw->conf.chandef.width) {
1273 case NL80211_CHAN_WIDTH_20_NOHT:
1274 ht = false;
1275 /* fall through */
1276 case NL80211_CHAN_WIDTH_20:
1277 rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_20;
1278 subchannel = 0;
1280 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
1281 val32 &= ~FPGA_RF_MODE;
1282 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
1284 val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
1285 val32 &= ~FPGA_RF_MODE;
1286 rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
1288 val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
1289 val32 &= ~(BIT(30) | BIT(31));
1290 rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
1292 break;
1293 case NL80211_CHAN_WIDTH_40:
1294 rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_40;
1296 if (hw->conf.chandef.center_freq1 >
1297 hw->conf.chandef.chan->center_freq) {
1298 sec_ch_above = 1;
1299 channel += 2;
1300 } else {
1301 sec_ch_above = 0;
1302 channel -= 2;
1305 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
1306 val32 |= FPGA_RF_MODE;
1307 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
1309 val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
1310 val32 |= FPGA_RF_MODE;
1311 rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
1314 * Set Control channel to upper or lower. These settings
1315 * are required only for 40MHz
1317 val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
1318 val32 &= ~CCK0_SIDEBAND;
1319 if (!sec_ch_above)
1320 val32 |= CCK0_SIDEBAND;
1321 rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
1323 val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
1324 val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */
1325 if (sec_ch_above)
1326 val32 |= OFDM_LSTF_PRIME_CH_LOW;
1327 else
1328 val32 |= OFDM_LSTF_PRIME_CH_HIGH;
1329 rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
1331 val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
1332 val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL);
1333 if (sec_ch_above)
1334 val32 |= FPGA0_PS_UPPER_CHANNEL;
1335 else
1336 val32 |= FPGA0_PS_LOWER_CHANNEL;
1337 rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
1338 break;
1339 case NL80211_CHAN_WIDTH_80:
1340 rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_80;
1341 break;
1342 default:
1343 break;
1346 for (i = RF_A; i < priv->rf_paths; i++) {
1347 val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
1348 val32 &= ~MODE_AG_CHANNEL_MASK;
1349 val32 |= channel;
1350 rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
1353 rtl8xxxu_write16(priv, REG_WMAC_TRXPTCL_CTL, rf_mode_bw);
1354 rtl8xxxu_write8(priv, REG_DATA_SUBCHANNEL, subchannel);
1356 if (ht)
1357 val8 = 0x0e;
1358 else
1359 val8 = 0x0a;
1361 rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8);
1362 rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8);
1364 rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808);
1365 rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a);
1367 for (i = RF_A; i < priv->rf_paths; i++) {
1368 val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
1369 val32 &= ~MODE_AG_BW_MASK;
1370 switch(hw->conf.chandef.width) {
1371 case NL80211_CHAN_WIDTH_80:
1372 val32 |= MODE_AG_BW_80MHZ_8723B;
1373 break;
1374 case NL80211_CHAN_WIDTH_40:
1375 val32 |= MODE_AG_BW_40MHZ_8723B;
1376 break;
1377 default:
1378 val32 |= MODE_AG_BW_20MHZ_8723B;
1379 break;
1381 rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
1385 void
1386 rtl8xxxu_gen1_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
1388 struct rtl8xxxu_power_base *power_base = priv->power_base;
1389 u8 cck[RTL8723A_MAX_RF_PATHS], ofdm[RTL8723A_MAX_RF_PATHS];
1390 u8 ofdmbase[RTL8723A_MAX_RF_PATHS], mcsbase[RTL8723A_MAX_RF_PATHS];
1391 u32 val32, ofdm_a, ofdm_b, mcs_a, mcs_b;
1392 u8 val8;
1393 int group, i;
1395 group = rtl8xxxu_gen1_channel_to_group(channel);
1397 cck[0] = priv->cck_tx_power_index_A[group] - 1;
1398 cck[1] = priv->cck_tx_power_index_B[group] - 1;
1400 if (priv->hi_pa) {
1401 if (cck[0] > 0x20)
1402 cck[0] = 0x20;
1403 if (cck[1] > 0x20)
1404 cck[1] = 0x20;
1407 ofdm[0] = priv->ht40_1s_tx_power_index_A[group];
1408 ofdm[1] = priv->ht40_1s_tx_power_index_B[group];
1409 if (ofdm[0])
1410 ofdm[0] -= 1;
1411 if (ofdm[1])
1412 ofdm[1] -= 1;
1414 ofdmbase[0] = ofdm[0] + priv->ofdm_tx_power_index_diff[group].a;
1415 ofdmbase[1] = ofdm[1] + priv->ofdm_tx_power_index_diff[group].b;
1417 mcsbase[0] = ofdm[0];
1418 mcsbase[1] = ofdm[1];
1419 if (!ht40) {
1420 mcsbase[0] += priv->ht20_tx_power_index_diff[group].a;
1421 mcsbase[1] += priv->ht20_tx_power_index_diff[group].b;
1424 if (priv->tx_paths > 1) {
1425 if (ofdm[0] > priv->ht40_2s_tx_power_index_diff[group].a)
1426 ofdm[0] -= priv->ht40_2s_tx_power_index_diff[group].a;
1427 if (ofdm[1] > priv->ht40_2s_tx_power_index_diff[group].b)
1428 ofdm[1] -= priv->ht40_2s_tx_power_index_diff[group].b;
1431 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_CHANNEL)
1432 dev_info(&priv->udev->dev,
1433 "%s: Setting TX power CCK A: %02x, "
1434 "CCK B: %02x, OFDM A: %02x, OFDM B: %02x\n",
1435 __func__, cck[0], cck[1], ofdm[0], ofdm[1]);
1437 for (i = 0; i < RTL8723A_MAX_RF_PATHS; i++) {
1438 if (cck[i] > RF6052_MAX_TX_PWR)
1439 cck[i] = RF6052_MAX_TX_PWR;
1440 if (ofdm[i] > RF6052_MAX_TX_PWR)
1441 ofdm[i] = RF6052_MAX_TX_PWR;
1444 val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32);
1445 val32 &= 0xffff00ff;
1446 val32 |= (cck[0] << 8);
1447 rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32);
1449 val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
1450 val32 &= 0xff;
1451 val32 |= ((cck[0] << 8) | (cck[0] << 16) | (cck[0] << 24));
1452 rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
1454 val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
1455 val32 &= 0xffffff00;
1456 val32 |= cck[1];
1457 rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
1459 val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK1_55_MCS32);
1460 val32 &= 0xff;
1461 val32 |= ((cck[1] << 8) | (cck[1] << 16) | (cck[1] << 24));
1462 rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK1_55_MCS32, val32);
1464 ofdm_a = ofdmbase[0] | ofdmbase[0] << 8 |
1465 ofdmbase[0] << 16 | ofdmbase[0] << 24;
1466 ofdm_b = ofdmbase[1] | ofdmbase[1] << 8 |
1467 ofdmbase[1] << 16 | ofdmbase[1] << 24;
1469 rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06,
1470 ofdm_a + power_base->reg_0e00);
1471 rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE18_06,
1472 ofdm_b + power_base->reg_0830);
1474 rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24,
1475 ofdm_a + power_base->reg_0e04);
1476 rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE54_24,
1477 ofdm_b + power_base->reg_0834);
1479 mcs_a = mcsbase[0] | mcsbase[0] << 8 |
1480 mcsbase[0] << 16 | mcsbase[0] << 24;
1481 mcs_b = mcsbase[1] | mcsbase[1] << 8 |
1482 mcsbase[1] << 16 | mcsbase[1] << 24;
1484 rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00,
1485 mcs_a + power_base->reg_0e10);
1486 rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS03_MCS00,
1487 mcs_b + power_base->reg_083c);
1489 rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04,
1490 mcs_a + power_base->reg_0e14);
1491 rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS07_MCS04,
1492 mcs_b + power_base->reg_0848);
1494 rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08,
1495 mcs_a + power_base->reg_0e18);
1496 rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS11_MCS08,
1497 mcs_b + power_base->reg_084c);
1499 rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12,
1500 mcs_a + power_base->reg_0e1c);
1501 for (i = 0; i < 3; i++) {
1502 if (i != 2)
1503 val8 = (mcsbase[0] > 8) ? (mcsbase[0] - 8) : 0;
1504 else
1505 val8 = (mcsbase[0] > 6) ? (mcsbase[0] - 6) : 0;
1506 rtl8xxxu_write8(priv, REG_OFDM0_XC_TX_IQ_IMBALANCE + i, val8);
1508 rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12,
1509 mcs_b + power_base->reg_0868);
1510 for (i = 0; i < 3; i++) {
1511 if (i != 2)
1512 val8 = (mcsbase[1] > 8) ? (mcsbase[1] - 8) : 0;
1513 else
1514 val8 = (mcsbase[1] > 6) ? (mcsbase[1] - 6) : 0;
1515 rtl8xxxu_write8(priv, REG_OFDM0_XD_TX_IQ_IMBALANCE + i, val8);
1519 static void rtl8xxxu_set_linktype(struct rtl8xxxu_priv *priv,
1520 enum nl80211_iftype linktype)
1522 u8 val8;
1524 val8 = rtl8xxxu_read8(priv, REG_MSR);
1525 val8 &= ~MSR_LINKTYPE_MASK;
1527 switch (linktype) {
1528 case NL80211_IFTYPE_UNSPECIFIED:
1529 val8 |= MSR_LINKTYPE_NONE;
1530 break;
1531 case NL80211_IFTYPE_ADHOC:
1532 val8 |= MSR_LINKTYPE_ADHOC;
1533 break;
1534 case NL80211_IFTYPE_STATION:
1535 val8 |= MSR_LINKTYPE_STATION;
1536 break;
1537 case NL80211_IFTYPE_AP:
1538 val8 |= MSR_LINKTYPE_AP;
1539 break;
1540 default:
1541 goto out;
1544 rtl8xxxu_write8(priv, REG_MSR, val8);
1545 out:
1546 return;
1549 static void
1550 rtl8xxxu_set_retry(struct rtl8xxxu_priv *priv, u16 short_retry, u16 long_retry)
1552 u16 val16;
1554 val16 = ((short_retry << RETRY_LIMIT_SHORT_SHIFT) &
1555 RETRY_LIMIT_SHORT_MASK) |
1556 ((long_retry << RETRY_LIMIT_LONG_SHIFT) &
1557 RETRY_LIMIT_LONG_MASK);
1559 rtl8xxxu_write16(priv, REG_RETRY_LIMIT, val16);
1562 static void
1563 rtl8xxxu_set_spec_sifs(struct rtl8xxxu_priv *priv, u16 cck, u16 ofdm)
1565 u16 val16;
1567 val16 = ((cck << SPEC_SIFS_CCK_SHIFT) & SPEC_SIFS_CCK_MASK) |
1568 ((ofdm << SPEC_SIFS_OFDM_SHIFT) & SPEC_SIFS_OFDM_MASK);
1570 rtl8xxxu_write16(priv, REG_SPEC_SIFS, val16);
1573 static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv)
1575 struct device *dev = &priv->udev->dev;
1576 char *cut;
1578 switch (priv->chip_cut) {
1579 case 0:
1580 cut = "A";
1581 break;
1582 case 1:
1583 cut = "B";
1584 break;
1585 case 2:
1586 cut = "C";
1587 break;
1588 case 3:
1589 cut = "D";
1590 break;
1591 case 4:
1592 cut = "E";
1593 break;
1594 default:
1595 cut = "unknown";
1598 dev_info(dev,
1599 "RTL%s rev %s (%s) %iT%iR, TX queues %i, WiFi=%i, BT=%i, GPS=%i, HI PA=%i\n",
1600 priv->chip_name, cut, priv->chip_vendor, priv->tx_paths,
1601 priv->rx_paths, priv->ep_tx_count, priv->has_wifi,
1602 priv->has_bluetooth, priv->has_gps, priv->hi_pa);
1604 dev_info(dev, "RTL%s MAC: %pM\n", priv->chip_name, priv->mac_addr);
1607 static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
1609 struct device *dev = &priv->udev->dev;
1610 u32 val32, bonding;
1611 u16 val16;
1613 val32 = rtl8xxxu_read32(priv, REG_SYS_CFG);
1614 priv->chip_cut = (val32 & SYS_CFG_CHIP_VERSION_MASK) >>
1615 SYS_CFG_CHIP_VERSION_SHIFT;
1616 if (val32 & SYS_CFG_TRP_VAUX_EN) {
1617 dev_info(dev, "Unsupported test chip\n");
1618 return -ENOTSUPP;
1621 if (val32 & SYS_CFG_BT_FUNC) {
1622 if (priv->chip_cut >= 3) {
1623 sprintf(priv->chip_name, "8723BU");
1624 priv->rtl_chip = RTL8723B;
1625 } else {
1626 sprintf(priv->chip_name, "8723AU");
1627 priv->usb_interrupts = 1;
1628 priv->rtl_chip = RTL8723A;
1631 priv->rf_paths = 1;
1632 priv->rx_paths = 1;
1633 priv->tx_paths = 1;
1635 val32 = rtl8xxxu_read32(priv, REG_MULTI_FUNC_CTRL);
1636 if (val32 & MULTI_WIFI_FUNC_EN)
1637 priv->has_wifi = 1;
1638 if (val32 & MULTI_BT_FUNC_EN)
1639 priv->has_bluetooth = 1;
1640 if (val32 & MULTI_GPS_FUNC_EN)
1641 priv->has_gps = 1;
1642 priv->is_multi_func = 1;
1643 } else if (val32 & SYS_CFG_TYPE_ID) {
1644 bonding = rtl8xxxu_read32(priv, REG_HPON_FSM);
1645 bonding &= HPON_FSM_BONDING_MASK;
1646 if (priv->fops->tx_desc_size ==
1647 sizeof(struct rtl8xxxu_txdesc40)) {
1648 if (bonding == HPON_FSM_BONDING_1T2R) {
1649 sprintf(priv->chip_name, "8191EU");
1650 priv->rf_paths = 2;
1651 priv->rx_paths = 2;
1652 priv->tx_paths = 1;
1653 priv->rtl_chip = RTL8191E;
1654 } else {
1655 sprintf(priv->chip_name, "8192EU");
1656 priv->rf_paths = 2;
1657 priv->rx_paths = 2;
1658 priv->tx_paths = 2;
1659 priv->rtl_chip = RTL8192E;
1661 } else if (bonding == HPON_FSM_BONDING_1T2R) {
1662 sprintf(priv->chip_name, "8191CU");
1663 priv->rf_paths = 2;
1664 priv->rx_paths = 2;
1665 priv->tx_paths = 1;
1666 priv->usb_interrupts = 1;
1667 priv->rtl_chip = RTL8191C;
1668 } else {
1669 sprintf(priv->chip_name, "8192CU");
1670 priv->rf_paths = 2;
1671 priv->rx_paths = 2;
1672 priv->tx_paths = 2;
1673 priv->usb_interrupts = 1;
1674 priv->rtl_chip = RTL8192C;
1676 priv->has_wifi = 1;
1677 } else {
1678 sprintf(priv->chip_name, "8188CU");
1679 priv->rf_paths = 1;
1680 priv->rx_paths = 1;
1681 priv->tx_paths = 1;
1682 priv->rtl_chip = RTL8188C;
1683 priv->usb_interrupts = 1;
1684 priv->has_wifi = 1;
1687 switch (priv->rtl_chip) {
1688 case RTL8188E:
1689 case RTL8192E:
1690 case RTL8723B:
1691 switch (val32 & SYS_CFG_VENDOR_EXT_MASK) {
1692 case SYS_CFG_VENDOR_ID_TSMC:
1693 sprintf(priv->chip_vendor, "TSMC");
1694 break;
1695 case SYS_CFG_VENDOR_ID_SMIC:
1696 sprintf(priv->chip_vendor, "SMIC");
1697 priv->vendor_smic = 1;
1698 break;
1699 case SYS_CFG_VENDOR_ID_UMC:
1700 sprintf(priv->chip_vendor, "UMC");
1701 priv->vendor_umc = 1;
1702 break;
1703 default:
1704 sprintf(priv->chip_vendor, "unknown");
1706 break;
1707 default:
1708 if (val32 & SYS_CFG_VENDOR_ID) {
1709 sprintf(priv->chip_vendor, "UMC");
1710 priv->vendor_umc = 1;
1711 } else {
1712 sprintf(priv->chip_vendor, "TSMC");
1716 val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS);
1717 priv->rom_rev = (val32 & GPIO_RF_RL_ID) >> 28;
1719 val16 = rtl8xxxu_read16(priv, REG_NORMAL_SIE_EP_TX);
1720 if (val16 & NORMAL_SIE_EP_TX_HIGH_MASK) {
1721 priv->ep_tx_high_queue = 1;
1722 priv->ep_tx_count++;
1725 if (val16 & NORMAL_SIE_EP_TX_NORMAL_MASK) {
1726 priv->ep_tx_normal_queue = 1;
1727 priv->ep_tx_count++;
1730 if (val16 & NORMAL_SIE_EP_TX_LOW_MASK) {
1731 priv->ep_tx_low_queue = 1;
1732 priv->ep_tx_count++;
1736 * Fallback for devices that do not provide REG_NORMAL_SIE_EP_TX
1738 if (!priv->ep_tx_count) {
1739 switch (priv->nr_out_eps) {
1740 case 4:
1741 case 3:
1742 priv->ep_tx_low_queue = 1;
1743 priv->ep_tx_count++;
1744 /* fall through */
1745 case 2:
1746 priv->ep_tx_normal_queue = 1;
1747 priv->ep_tx_count++;
1748 /* fall through */
1749 case 1:
1750 priv->ep_tx_high_queue = 1;
1751 priv->ep_tx_count++;
1752 break;
1753 default:
1754 dev_info(dev, "Unsupported USB TX end-points\n");
1755 return -ENOTSUPP;
1759 return 0;
1762 static int
1763 rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data)
1765 int i;
1766 u8 val8;
1767 u32 val32;
1769 /* Write Address */
1770 rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 1, offset & 0xff);
1771 val8 = rtl8xxxu_read8(priv, REG_EFUSE_CTRL + 2);
1772 val8 &= 0xfc;
1773 val8 |= (offset >> 8) & 0x03;
1774 rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 2, val8);
1776 val8 = rtl8xxxu_read8(priv, REG_EFUSE_CTRL + 3);
1777 rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 3, val8 & 0x7f);
1779 /* Poll for data read */
1780 val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
1781 for (i = 0; i < RTL8XXXU_MAX_REG_POLL; i++) {
1782 val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
1783 if (val32 & BIT(31))
1784 break;
1787 if (i == RTL8XXXU_MAX_REG_POLL)
1788 return -EIO;
1790 udelay(50);
1791 val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
1793 *data = val32 & 0xff;
1794 return 0;
1797 static int rtl8xxxu_read_efuse(struct rtl8xxxu_priv *priv)
1799 struct device *dev = &priv->udev->dev;
1800 int i, ret = 0;
1801 u8 val8, word_mask, header, extheader;
1802 u16 val16, efuse_addr, offset;
1803 u32 val32;
1805 val16 = rtl8xxxu_read16(priv, REG_9346CR);
1806 if (val16 & EEPROM_ENABLE)
1807 priv->has_eeprom = 1;
1808 if (val16 & EEPROM_BOOT)
1809 priv->boot_eeprom = 1;
1811 if (priv->is_multi_func) {
1812 val32 = rtl8xxxu_read32(priv, REG_EFUSE_TEST);
1813 val32 = (val32 & ~EFUSE_SELECT_MASK) | EFUSE_WIFI_SELECT;
1814 rtl8xxxu_write32(priv, REG_EFUSE_TEST, val32);
1817 dev_dbg(dev, "Booting from %s\n",
1818 priv->boot_eeprom ? "EEPROM" : "EFUSE");
1820 rtl8xxxu_write8(priv, REG_EFUSE_ACCESS, EFUSE_ACCESS_ENABLE);
1822 /* 1.2V Power: From VDDON with Power Cut(0x0000[15]), default valid */
1823 val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL);
1824 if (!(val16 & SYS_ISO_PWC_EV12V)) {
1825 val16 |= SYS_ISO_PWC_EV12V;
1826 rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16);
1828 /* Reset: 0x0000[28], default valid */
1829 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
1830 if (!(val16 & SYS_FUNC_ELDR)) {
1831 val16 |= SYS_FUNC_ELDR;
1832 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
1836 * Clock: Gated(0x0008[5]) 8M(0x0008[1]) clock from ANA, default valid
1838 val16 = rtl8xxxu_read16(priv, REG_SYS_CLKR);
1839 if (!(val16 & SYS_CLK_LOADER_ENABLE) || !(val16 & SYS_CLK_ANA8M)) {
1840 val16 |= (SYS_CLK_LOADER_ENABLE | SYS_CLK_ANA8M);
1841 rtl8xxxu_write16(priv, REG_SYS_CLKR, val16);
1844 /* Default value is 0xff */
1845 memset(priv->efuse_wifi.raw, 0xff, EFUSE_MAP_LEN);
1847 efuse_addr = 0;
1848 while (efuse_addr < EFUSE_REAL_CONTENT_LEN_8723A) {
1849 u16 map_addr;
1851 ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &header);
1852 if (ret || header == 0xff)
1853 goto exit;
1855 if ((header & 0x1f) == 0x0f) { /* extended header */
1856 offset = (header & 0xe0) >> 5;
1858 ret = rtl8xxxu_read_efuse8(priv, efuse_addr++,
1859 &extheader);
1860 if (ret)
1861 goto exit;
1862 /* All words disabled */
1863 if ((extheader & 0x0f) == 0x0f)
1864 continue;
1866 offset |= ((extheader & 0xf0) >> 1);
1867 word_mask = extheader & 0x0f;
1868 } else {
1869 offset = (header >> 4) & 0x0f;
1870 word_mask = header & 0x0f;
1873 /* Get word enable value from PG header */
1875 /* We have 8 bits to indicate validity */
1876 map_addr = offset * 8;
1877 if (map_addr >= EFUSE_MAP_LEN) {
1878 dev_warn(dev, "%s: Illegal map_addr (%04x), "
1879 "efuse corrupt!\n",
1880 __func__, map_addr);
1881 ret = -EINVAL;
1882 goto exit;
1884 for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
1885 /* Check word enable condition in the section */
1886 if (word_mask & BIT(i)) {
1887 map_addr += 2;
1888 continue;
1891 ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8);
1892 if (ret)
1893 goto exit;
1894 priv->efuse_wifi.raw[map_addr++] = val8;
1896 ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8);
1897 if (ret)
1898 goto exit;
1899 priv->efuse_wifi.raw[map_addr++] = val8;
1903 exit:
1904 rtl8xxxu_write8(priv, REG_EFUSE_ACCESS, EFUSE_ACCESS_DISABLE);
1906 return ret;
1909 void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv)
1911 u8 val8;
1912 u16 sys_func;
1914 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
1915 val8 &= ~BIT(0);
1916 rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
1918 sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC);
1919 sys_func &= ~SYS_FUNC_CPU_ENABLE;
1920 rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
1922 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
1923 val8 |= BIT(0);
1924 rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
1926 sys_func |= SYS_FUNC_CPU_ENABLE;
1927 rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
1930 static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv)
1932 struct device *dev = &priv->udev->dev;
1933 int ret = 0, i;
1934 u32 val32;
1936 /* Poll checksum report */
1937 for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) {
1938 val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL);
1939 if (val32 & MCU_FW_DL_CSUM_REPORT)
1940 break;
1943 if (i == RTL8XXXU_FIRMWARE_POLL_MAX) {
1944 dev_warn(dev, "Firmware checksum poll timed out\n");
1945 ret = -EAGAIN;
1946 goto exit;
1949 val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL);
1950 val32 |= MCU_FW_DL_READY;
1951 val32 &= ~MCU_WINT_INIT_READY;
1952 rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32);
1955 * Reset the 8051 in order for the firmware to start running,
1956 * otherwise it won't come up on the 8192eu
1958 priv->fops->reset_8051(priv);
1960 /* Wait for firmware to become ready */
1961 for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) {
1962 val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL);
1963 if (val32 & MCU_WINT_INIT_READY)
1964 break;
1966 udelay(100);
1969 if (i == RTL8XXXU_FIRMWARE_POLL_MAX) {
1970 dev_warn(dev, "Firmware failed to start\n");
1971 ret = -EAGAIN;
1972 goto exit;
1976 * Init H2C command
1978 if (priv->rtl_chip == RTL8723B)
1979 rtl8xxxu_write8(priv, REG_HMTFR, 0x0f);
1980 exit:
1981 return ret;
1984 static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv)
1986 int pages, remainder, i, ret;
1987 u8 val8;
1988 u16 val16;
1989 u32 val32;
1990 u8 *fwptr;
1992 val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC + 1);
1993 val8 |= 4;
1994 rtl8xxxu_write8(priv, REG_SYS_FUNC + 1, val8);
1996 /* 8051 enable */
1997 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
1998 val16 |= SYS_FUNC_CPU_ENABLE;
1999 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
2001 val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL);
2002 if (val8 & MCU_FW_RAM_SEL) {
2003 pr_info("do the RAM reset\n");
2004 rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
2005 priv->fops->reset_8051(priv);
2008 /* MCU firmware download enable */
2009 val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL);
2010 val8 |= MCU_FW_DL_ENABLE;
2011 rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8);
2013 /* 8051 reset */
2014 val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL);
2015 val32 &= ~BIT(19);
2016 rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32);
2018 /* Reset firmware download checksum */
2019 val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL);
2020 val8 |= MCU_FW_DL_CSUM_REPORT;
2021 rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8);
2023 pages = priv->fw_size / RTL_FW_PAGE_SIZE;
2024 remainder = priv->fw_size % RTL_FW_PAGE_SIZE;
2026 fwptr = priv->fw_data->data;
2028 for (i = 0; i < pages; i++) {
2029 val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL + 2) & 0xF8;
2030 val8 |= i;
2031 rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8);
2033 ret = rtl8xxxu_writeN(priv, REG_FW_START_ADDRESS,
2034 fwptr, RTL_FW_PAGE_SIZE);
2035 if (ret != RTL_FW_PAGE_SIZE) {
2036 ret = -EAGAIN;
2037 goto fw_abort;
2040 fwptr += RTL_FW_PAGE_SIZE;
2043 if (remainder) {
2044 val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL + 2) & 0xF8;
2045 val8 |= i;
2046 rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8);
2047 ret = rtl8xxxu_writeN(priv, REG_FW_START_ADDRESS,
2048 fwptr, remainder);
2049 if (ret != remainder) {
2050 ret = -EAGAIN;
2051 goto fw_abort;
2055 ret = 0;
2056 fw_abort:
2057 /* MCU firmware download disable */
2058 val16 = rtl8xxxu_read16(priv, REG_MCU_FW_DL);
2059 val16 &= ~MCU_FW_DL_ENABLE;
2060 rtl8xxxu_write16(priv, REG_MCU_FW_DL, val16);
2062 return ret;
2065 int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name)
2067 struct device *dev = &priv->udev->dev;
2068 const struct firmware *fw;
2069 int ret = 0;
2070 u16 signature;
2072 dev_info(dev, "%s: Loading firmware %s\n", DRIVER_NAME, fw_name);
2073 if (request_firmware(&fw, fw_name, &priv->udev->dev)) {
2074 dev_warn(dev, "request_firmware(%s) failed\n", fw_name);
2075 ret = -EAGAIN;
2076 goto exit;
2078 if (!fw) {
2079 dev_warn(dev, "Firmware data not available\n");
2080 ret = -EINVAL;
2081 goto exit;
2084 priv->fw_data = kmemdup(fw->data, fw->size, GFP_KERNEL);
2085 if (!priv->fw_data) {
2086 ret = -ENOMEM;
2087 goto exit;
2089 priv->fw_size = fw->size - sizeof(struct rtl8xxxu_firmware_header);
2091 signature = le16_to_cpu(priv->fw_data->signature);
2092 switch (signature & 0xfff0) {
2093 case 0x92e0:
2094 case 0x92c0:
2095 case 0x88c0:
2096 case 0x5300:
2097 case 0x2300:
2098 break;
2099 default:
2100 ret = -EINVAL;
2101 dev_warn(dev, "%s: Invalid firmware signature: 0x%04x\n",
2102 __func__, signature);
2105 dev_info(dev, "Firmware revision %i.%i (signature 0x%04x)\n",
2106 le16_to_cpu(priv->fw_data->major_version),
2107 priv->fw_data->minor_version, signature);
2109 exit:
2110 release_firmware(fw);
2111 return ret;
2114 void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv)
2116 u16 val16;
2117 int i = 100;
2119 /* Inform 8051 to perform reset */
2120 rtl8xxxu_write8(priv, REG_HMTFR + 3, 0x20);
2122 for (i = 100; i > 0; i--) {
2123 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
2125 if (!(val16 & SYS_FUNC_CPU_ENABLE)) {
2126 dev_dbg(&priv->udev->dev,
2127 "%s: Firmware self reset success!\n", __func__);
2128 break;
2130 udelay(50);
2133 if (!i) {
2134 /* Force firmware reset */
2135 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
2136 val16 &= ~SYS_FUNC_CPU_ENABLE;
2137 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
2141 static int
2142 rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv)
2144 struct rtl8xxxu_reg8val *array = priv->fops->mactable;
2145 int i, ret;
2146 u16 reg;
2147 u8 val;
2149 for (i = 0; ; i++) {
2150 reg = array[i].reg;
2151 val = array[i].val;
2153 if (reg == 0xffff && val == 0xff)
2154 break;
2156 ret = rtl8xxxu_write8(priv, reg, val);
2157 if (ret != 1) {
2158 dev_warn(&priv->udev->dev,
2159 "Failed to initialize MAC "
2160 "(reg: %04x, val %02x)\n", reg, val);
2161 return -EAGAIN;
2165 if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E)
2166 rtl8xxxu_write8(priv, REG_MAX_AGGR_NUM, 0x0a);
2168 return 0;
2171 int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv,
2172 struct rtl8xxxu_reg32val *array)
2174 int i, ret;
2175 u16 reg;
2176 u32 val;
2178 for (i = 0; ; i++) {
2179 reg = array[i].reg;
2180 val = array[i].val;
2182 if (reg == 0xffff && val == 0xffffffff)
2183 break;
2185 ret = rtl8xxxu_write32(priv, reg, val);
2186 if (ret != sizeof(val)) {
2187 dev_warn(&priv->udev->dev,
2188 "Failed to initialize PHY\n");
2189 return -EAGAIN;
2191 udelay(1);
2194 return 0;
2197 void rtl8xxxu_gen1_init_phy_bb(struct rtl8xxxu_priv *priv)
2199 u8 val8, ldoa15, ldov12d, lpldo, ldohci12;
2200 u16 val16;
2201 u32 val32;
2203 val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL);
2204 udelay(2);
2205 val8 |= AFE_PLL_320_ENABLE;
2206 rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8);
2207 udelay(2);
2209 rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL + 1, 0xff);
2210 udelay(2);
2212 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
2213 val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB;
2214 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
2216 val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL);
2217 val32 &= ~AFE_XTAL_RF_GATE;
2218 if (priv->has_bluetooth)
2219 val32 &= ~AFE_XTAL_BT_GATE;
2220 rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32);
2222 /* 6. 0x1f[7:0] = 0x07 */
2223 val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
2224 rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
2226 if (priv->hi_pa)
2227 rtl8xxxu_init_phy_regs(priv, rtl8188ru_phy_1t_highpa_table);
2228 else if (priv->tx_paths == 2)
2229 rtl8xxxu_init_phy_regs(priv, rtl8192cu_phy_2t_init_table);
2230 else
2231 rtl8xxxu_init_phy_regs(priv, rtl8723a_phy_1t_init_table);
2233 if (priv->rtl_chip == RTL8188R && priv->hi_pa &&
2234 priv->vendor_umc && priv->chip_cut == 1)
2235 rtl8xxxu_write8(priv, REG_OFDM0_AGC_PARM1 + 2, 0x50);
2237 if (priv->hi_pa)
2238 rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table);
2239 else
2240 rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table);
2242 ldoa15 = LDOA15_ENABLE | LDOA15_OBUF;
2243 ldov12d = LDOV12D_ENABLE | BIT(2) | (2 << LDOV12D_VADJ_SHIFT);
2244 ldohci12 = 0x57;
2245 lpldo = 1;
2246 val32 = (lpldo << 24) | (ldohci12 << 16) | (ldov12d << 8) | ldoa15;
2247 rtl8xxxu_write32(priv, REG_LDOA15_CTRL, val32);
2251 * Most of this is black magic retrieved from the old rtl8723au driver
2253 static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv)
2255 u8 val8;
2256 u32 val32;
2258 priv->fops->init_phy_bb(priv);
2260 if (priv->tx_paths == 1 && priv->rx_paths == 2) {
2262 * For 1T2R boards, patch the registers.
2264 * It looks like 8191/2 1T2R boards use path B for TX
2266 val32 = rtl8xxxu_read32(priv, REG_FPGA0_TX_INFO);
2267 val32 &= ~(BIT(0) | BIT(1));
2268 val32 |= BIT(1);
2269 rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, val32);
2271 val32 = rtl8xxxu_read32(priv, REG_FPGA1_TX_INFO);
2272 val32 &= ~0x300033;
2273 val32 |= 0x200022;
2274 rtl8xxxu_write32(priv, REG_FPGA1_TX_INFO, val32);
2276 val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
2277 val32 &= ~CCK0_AFE_RX_MASK;
2278 val32 &= 0x00ffffff;
2279 val32 |= 0x40000000;
2280 val32 |= CCK0_AFE_RX_ANT_B;
2281 rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
2283 val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
2284 val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK);
2285 val32 |= (OFDM_RF_PATH_RX_A | OFDM_RF_PATH_RX_B |
2286 OFDM_RF_PATH_TX_B);
2287 rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
2289 val32 = rtl8xxxu_read32(priv, REG_OFDM0_AGC_PARM1);
2290 val32 &= ~(BIT(4) | BIT(5));
2291 val32 |= BIT(4);
2292 rtl8xxxu_write32(priv, REG_OFDM0_AGC_PARM1, val32);
2294 val32 = rtl8xxxu_read32(priv, REG_TX_CCK_RFON);
2295 val32 &= ~(BIT(27) | BIT(26));
2296 val32 |= BIT(27);
2297 rtl8xxxu_write32(priv, REG_TX_CCK_RFON, val32);
2299 val32 = rtl8xxxu_read32(priv, REG_TX_CCK_BBON);
2300 val32 &= ~(BIT(27) | BIT(26));
2301 val32 |= BIT(27);
2302 rtl8xxxu_write32(priv, REG_TX_CCK_BBON, val32);
2304 val32 = rtl8xxxu_read32(priv, REG_TX_OFDM_RFON);
2305 val32 &= ~(BIT(27) | BIT(26));
2306 val32 |= BIT(27);
2307 rtl8xxxu_write32(priv, REG_TX_OFDM_RFON, val32);
2309 val32 = rtl8xxxu_read32(priv, REG_TX_OFDM_BBON);
2310 val32 &= ~(BIT(27) | BIT(26));
2311 val32 |= BIT(27);
2312 rtl8xxxu_write32(priv, REG_TX_OFDM_BBON, val32);
2314 val32 = rtl8xxxu_read32(priv, REG_TX_TO_TX);
2315 val32 &= ~(BIT(27) | BIT(26));
2316 val32 |= BIT(27);
2317 rtl8xxxu_write32(priv, REG_TX_TO_TX, val32);
2320 if (priv->has_xtalk) {
2321 val32 = rtl8xxxu_read32(priv, REG_MAC_PHY_CTRL);
2323 val8 = priv->xtalk;
2324 val32 &= 0xff000fff;
2325 val32 |= ((val8 | (val8 << 6)) << 12);
2327 rtl8xxxu_write32(priv, REG_MAC_PHY_CTRL, val32);
2330 if (priv->rtl_chip == RTL8192E)
2331 rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x000f81fb);
2333 return 0;
2336 static int rtl8xxxu_init_rf_regs(struct rtl8xxxu_priv *priv,
2337 struct rtl8xxxu_rfregval *array,
2338 enum rtl8xxxu_rfpath path)
2340 int i, ret;
2341 u8 reg;
2342 u32 val;
2344 for (i = 0; ; i++) {
2345 reg = array[i].reg;
2346 val = array[i].val;
2348 if (reg == 0xff && val == 0xffffffff)
2349 break;
2351 switch (reg) {
2352 case 0xfe:
2353 msleep(50);
2354 continue;
2355 case 0xfd:
2356 mdelay(5);
2357 continue;
2358 case 0xfc:
2359 mdelay(1);
2360 continue;
2361 case 0xfb:
2362 udelay(50);
2363 continue;
2364 case 0xfa:
2365 udelay(5);
2366 continue;
2367 case 0xf9:
2368 udelay(1);
2369 continue;
2372 ret = rtl8xxxu_write_rfreg(priv, path, reg, val);
2373 if (ret) {
2374 dev_warn(&priv->udev->dev,
2375 "Failed to initialize RF\n");
2376 return -EAGAIN;
2378 udelay(1);
2381 return 0;
2384 int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv,
2385 struct rtl8xxxu_rfregval *table,
2386 enum rtl8xxxu_rfpath path)
2388 u32 val32;
2389 u16 val16, rfsi_rfenv;
2390 u16 reg_sw_ctrl, reg_int_oe, reg_hssi_parm2;
2392 switch (path) {
2393 case RF_A:
2394 reg_sw_ctrl = REG_FPGA0_XA_RF_SW_CTRL;
2395 reg_int_oe = REG_FPGA0_XA_RF_INT_OE;
2396 reg_hssi_parm2 = REG_FPGA0_XA_HSSI_PARM2;
2397 break;
2398 case RF_B:
2399 reg_sw_ctrl = REG_FPGA0_XB_RF_SW_CTRL;
2400 reg_int_oe = REG_FPGA0_XB_RF_INT_OE;
2401 reg_hssi_parm2 = REG_FPGA0_XB_HSSI_PARM2;
2402 break;
2403 default:
2404 dev_err(&priv->udev->dev, "%s:Unsupported RF path %c\n",
2405 __func__, path + 'A');
2406 return -EINVAL;
2408 /* For path B, use XB */
2409 rfsi_rfenv = rtl8xxxu_read16(priv, reg_sw_ctrl);
2410 rfsi_rfenv &= FPGA0_RF_RFENV;
2413 * These two we might be able to optimize into one
2415 val32 = rtl8xxxu_read32(priv, reg_int_oe);
2416 val32 |= BIT(20); /* 0x10 << 16 */
2417 rtl8xxxu_write32(priv, reg_int_oe, val32);
2418 udelay(1);
2420 val32 = rtl8xxxu_read32(priv, reg_int_oe);
2421 val32 |= BIT(4);
2422 rtl8xxxu_write32(priv, reg_int_oe, val32);
2423 udelay(1);
2426 * These two we might be able to optimize into one
2428 val32 = rtl8xxxu_read32(priv, reg_hssi_parm2);
2429 val32 &= ~FPGA0_HSSI_3WIRE_ADDR_LEN;
2430 rtl8xxxu_write32(priv, reg_hssi_parm2, val32);
2431 udelay(1);
2433 val32 = rtl8xxxu_read32(priv, reg_hssi_parm2);
2434 val32 &= ~FPGA0_HSSI_3WIRE_DATA_LEN;
2435 rtl8xxxu_write32(priv, reg_hssi_parm2, val32);
2436 udelay(1);
2438 rtl8xxxu_init_rf_regs(priv, table, path);
2440 /* For path B, use XB */
2441 val16 = rtl8xxxu_read16(priv, reg_sw_ctrl);
2442 val16 &= ~FPGA0_RF_RFENV;
2443 val16 |= rfsi_rfenv;
2444 rtl8xxxu_write16(priv, reg_sw_ctrl, val16);
2446 return 0;
2449 static int rtl8xxxu_llt_write(struct rtl8xxxu_priv *priv, u8 address, u8 data)
2451 int ret = -EBUSY;
2452 int count = 0;
2453 u32 value;
2455 value = LLT_OP_WRITE | address << 8 | data;
2457 rtl8xxxu_write32(priv, REG_LLT_INIT, value);
2459 do {
2460 value = rtl8xxxu_read32(priv, REG_LLT_INIT);
2461 if ((value & LLT_OP_MASK) == LLT_OP_INACTIVE) {
2462 ret = 0;
2463 break;
2465 } while (count++ < 20);
2467 return ret;
2470 int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv)
2472 int ret;
2473 int i;
2474 u8 last_tx_page;
2476 last_tx_page = priv->fops->total_page_num;
2478 for (i = 0; i < last_tx_page; i++) {
2479 ret = rtl8xxxu_llt_write(priv, i, i + 1);
2480 if (ret)
2481 goto exit;
2484 ret = rtl8xxxu_llt_write(priv, last_tx_page, 0xff);
2485 if (ret)
2486 goto exit;
2488 /* Mark remaining pages as a ring buffer */
2489 for (i = last_tx_page + 1; i < 0xff; i++) {
2490 ret = rtl8xxxu_llt_write(priv, i, (i + 1));
2491 if (ret)
2492 goto exit;
2495 /* Let last entry point to the start entry of ring buffer */
2496 ret = rtl8xxxu_llt_write(priv, 0xff, last_tx_page + 1);
2497 if (ret)
2498 goto exit;
2500 exit:
2501 return ret;
2504 int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv)
2506 u32 val32;
2507 int ret = 0;
2508 int i;
2510 val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT);
2511 val32 |= AUTO_LLT_INIT_LLT;
2512 rtl8xxxu_write32(priv, REG_AUTO_LLT, val32);
2514 for (i = 500; i; i--) {
2515 val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT);
2516 if (!(val32 & AUTO_LLT_INIT_LLT))
2517 break;
2518 usleep_range(2, 4);
2521 if (!i) {
2522 ret = -EBUSY;
2523 dev_warn(&priv->udev->dev, "LLT table init failed\n");
2526 return ret;
2529 static int rtl8xxxu_init_queue_priority(struct rtl8xxxu_priv *priv)
2531 u16 val16, hi, lo;
2532 u16 hiq, mgq, bkq, beq, viq, voq;
2533 int hip, mgp, bkp, bep, vip, vop;
2534 int ret = 0;
2536 switch (priv->ep_tx_count) {
2537 case 1:
2538 if (priv->ep_tx_high_queue) {
2539 hi = TRXDMA_QUEUE_HIGH;
2540 } else if (priv->ep_tx_low_queue) {
2541 hi = TRXDMA_QUEUE_LOW;
2542 } else if (priv->ep_tx_normal_queue) {
2543 hi = TRXDMA_QUEUE_NORMAL;
2544 } else {
2545 hi = 0;
2546 ret = -EINVAL;
2549 hiq = hi;
2550 mgq = hi;
2551 bkq = hi;
2552 beq = hi;
2553 viq = hi;
2554 voq = hi;
2556 hip = 0;
2557 mgp = 0;
2558 bkp = 0;
2559 bep = 0;
2560 vip = 0;
2561 vop = 0;
2562 break;
2563 case 2:
2564 if (priv->ep_tx_high_queue && priv->ep_tx_low_queue) {
2565 hi = TRXDMA_QUEUE_HIGH;
2566 lo = TRXDMA_QUEUE_LOW;
2567 } else if (priv->ep_tx_normal_queue && priv->ep_tx_low_queue) {
2568 hi = TRXDMA_QUEUE_NORMAL;
2569 lo = TRXDMA_QUEUE_LOW;
2570 } else if (priv->ep_tx_high_queue && priv->ep_tx_normal_queue) {
2571 hi = TRXDMA_QUEUE_HIGH;
2572 lo = TRXDMA_QUEUE_NORMAL;
2573 } else {
2574 ret = -EINVAL;
2575 hi = 0;
2576 lo = 0;
2579 hiq = hi;
2580 mgq = hi;
2581 bkq = lo;
2582 beq = lo;
2583 viq = hi;
2584 voq = hi;
2586 hip = 0;
2587 mgp = 0;
2588 bkp = 1;
2589 bep = 1;
2590 vip = 0;
2591 vop = 0;
2592 break;
2593 case 3:
2594 beq = TRXDMA_QUEUE_LOW;
2595 bkq = TRXDMA_QUEUE_LOW;
2596 viq = TRXDMA_QUEUE_NORMAL;
2597 voq = TRXDMA_QUEUE_HIGH;
2598 mgq = TRXDMA_QUEUE_HIGH;
2599 hiq = TRXDMA_QUEUE_HIGH;
2601 hip = hiq ^ 3;
2602 mgp = mgq ^ 3;
2603 bkp = bkq ^ 3;
2604 bep = beq ^ 3;
2605 vip = viq ^ 3;
2606 vop = viq ^ 3;
2607 break;
2608 default:
2609 ret = -EINVAL;
2613 * None of the vendor drivers are configuring the beacon
2614 * queue here .... why?
2616 if (!ret) {
2617 val16 = rtl8xxxu_read16(priv, REG_TRXDMA_CTRL);
2618 val16 &= 0x7;
2619 val16 |= (voq << TRXDMA_CTRL_VOQ_SHIFT) |
2620 (viq << TRXDMA_CTRL_VIQ_SHIFT) |
2621 (beq << TRXDMA_CTRL_BEQ_SHIFT) |
2622 (bkq << TRXDMA_CTRL_BKQ_SHIFT) |
2623 (mgq << TRXDMA_CTRL_MGQ_SHIFT) |
2624 (hiq << TRXDMA_CTRL_HIQ_SHIFT);
2625 rtl8xxxu_write16(priv, REG_TRXDMA_CTRL, val16);
2627 priv->pipe_out[TXDESC_QUEUE_VO] =
2628 usb_sndbulkpipe(priv->udev, priv->out_ep[vop]);
2629 priv->pipe_out[TXDESC_QUEUE_VI] =
2630 usb_sndbulkpipe(priv->udev, priv->out_ep[vip]);
2631 priv->pipe_out[TXDESC_QUEUE_BE] =
2632 usb_sndbulkpipe(priv->udev, priv->out_ep[bep]);
2633 priv->pipe_out[TXDESC_QUEUE_BK] =
2634 usb_sndbulkpipe(priv->udev, priv->out_ep[bkp]);
2635 priv->pipe_out[TXDESC_QUEUE_BEACON] =
2636 usb_sndbulkpipe(priv->udev, priv->out_ep[0]);
2637 priv->pipe_out[TXDESC_QUEUE_MGNT] =
2638 usb_sndbulkpipe(priv->udev, priv->out_ep[mgp]);
2639 priv->pipe_out[TXDESC_QUEUE_HIGH] =
2640 usb_sndbulkpipe(priv->udev, priv->out_ep[hip]);
2641 priv->pipe_out[TXDESC_QUEUE_CMD] =
2642 usb_sndbulkpipe(priv->udev, priv->out_ep[0]);
2645 return ret;
2648 void rtl8xxxu_fill_iqk_matrix_a(struct rtl8xxxu_priv *priv, bool iqk_ok,
2649 int result[][8], int candidate, bool tx_only)
2651 u32 oldval, x, tx0_a, reg;
2652 int y, tx0_c;
2653 u32 val32;
2655 if (!iqk_ok)
2656 return;
2658 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE);
2659 oldval = val32 >> 22;
2661 x = result[candidate][0];
2662 if ((x & 0x00000200) != 0)
2663 x = x | 0xfffffc00;
2664 tx0_a = (x * oldval) >> 8;
2666 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE);
2667 val32 &= ~0x3ff;
2668 val32 |= tx0_a;
2669 rtl8xxxu_write32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE, val32);
2671 val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
2672 val32 &= ~BIT(31);
2673 if ((x * oldval >> 7) & 0x1)
2674 val32 |= BIT(31);
2675 rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
2677 y = result[candidate][1];
2678 if ((y & 0x00000200) != 0)
2679 y = y | 0xfffffc00;
2680 tx0_c = (y * oldval) >> 8;
2682 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XC_TX_AFE);
2683 val32 &= ~0xf0000000;
2684 val32 |= (((tx0_c & 0x3c0) >> 6) << 28);
2685 rtl8xxxu_write32(priv, REG_OFDM0_XC_TX_AFE, val32);
2687 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE);
2688 val32 &= ~0x003f0000;
2689 val32 |= ((tx0_c & 0x3f) << 16);
2690 rtl8xxxu_write32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE, val32);
2692 val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
2693 val32 &= ~BIT(29);
2694 if ((y * oldval >> 7) & 0x1)
2695 val32 |= BIT(29);
2696 rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
2698 if (tx_only) {
2699 dev_dbg(&priv->udev->dev, "%s: only TX\n", __func__);
2700 return;
2703 reg = result[candidate][2];
2705 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE);
2706 val32 &= ~0x3ff;
2707 val32 |= (reg & 0x3ff);
2708 rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE, val32);
2710 reg = result[candidate][3] & 0x3F;
2712 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE);
2713 val32 &= ~0xfc00;
2714 val32 |= ((reg << 10) & 0xfc00);
2715 rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE, val32);
2717 reg = (result[candidate][3] >> 6) & 0xF;
2719 val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_IQ_EXT_ANTA);
2720 val32 &= ~0xf0000000;
2721 val32 |= (reg << 28);
2722 rtl8xxxu_write32(priv, REG_OFDM0_RX_IQ_EXT_ANTA, val32);
2725 void rtl8xxxu_fill_iqk_matrix_b(struct rtl8xxxu_priv *priv, bool iqk_ok,
2726 int result[][8], int candidate, bool tx_only)
2728 u32 oldval, x, tx1_a, reg;
2729 int y, tx1_c;
2730 u32 val32;
2732 if (!iqk_ok)
2733 return;
2735 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE);
2736 oldval = val32 >> 22;
2738 x = result[candidate][4];
2739 if ((x & 0x00000200) != 0)
2740 x = x | 0xfffffc00;
2741 tx1_a = (x * oldval) >> 8;
2743 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE);
2744 val32 &= ~0x3ff;
2745 val32 |= tx1_a;
2746 rtl8xxxu_write32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE, val32);
2748 val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
2749 val32 &= ~BIT(27);
2750 if ((x * oldval >> 7) & 0x1)
2751 val32 |= BIT(27);
2752 rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
2754 y = result[candidate][5];
2755 if ((y & 0x00000200) != 0)
2756 y = y | 0xfffffc00;
2757 tx1_c = (y * oldval) >> 8;
2759 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XD_TX_AFE);
2760 val32 &= ~0xf0000000;
2761 val32 |= (((tx1_c & 0x3c0) >> 6) << 28);
2762 rtl8xxxu_write32(priv, REG_OFDM0_XD_TX_AFE, val32);
2764 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE);
2765 val32 &= ~0x003f0000;
2766 val32 |= ((tx1_c & 0x3f) << 16);
2767 rtl8xxxu_write32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE, val32);
2769 val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
2770 val32 &= ~BIT(25);
2771 if ((y * oldval >> 7) & 0x1)
2772 val32 |= BIT(25);
2773 rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
2775 if (tx_only) {
2776 dev_dbg(&priv->udev->dev, "%s: only TX\n", __func__);
2777 return;
2780 reg = result[candidate][6];
2782 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE);
2783 val32 &= ~0x3ff;
2784 val32 |= (reg & 0x3ff);
2785 rtl8xxxu_write32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE, val32);
2787 reg = result[candidate][7] & 0x3f;
2789 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE);
2790 val32 &= ~0xfc00;
2791 val32 |= ((reg << 10) & 0xfc00);
2792 rtl8xxxu_write32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE, val32);
2794 reg = (result[candidate][7] >> 6) & 0xf;
2796 val32 = rtl8xxxu_read32(priv, REG_OFDM0_AGCR_SSI_TABLE);
2797 val32 &= ~0x0000f000;
2798 val32 |= (reg << 12);
2799 rtl8xxxu_write32(priv, REG_OFDM0_AGCR_SSI_TABLE, val32);
2802 #define MAX_TOLERANCE 5
2804 static bool rtl8xxxu_simularity_compare(struct rtl8xxxu_priv *priv,
2805 int result[][8], int c1, int c2)
2807 u32 i, j, diff, simubitmap, bound = 0;
2808 int candidate[2] = {-1, -1}; /* for path A and path B */
2809 bool retval = true;
2811 if (priv->tx_paths > 1)
2812 bound = 8;
2813 else
2814 bound = 4;
2816 simubitmap = 0;
2818 for (i = 0; i < bound; i++) {
2819 diff = (result[c1][i] > result[c2][i]) ?
2820 (result[c1][i] - result[c2][i]) :
2821 (result[c2][i] - result[c1][i]);
2822 if (diff > MAX_TOLERANCE) {
2823 if ((i == 2 || i == 6) && !simubitmap) {
2824 if (result[c1][i] + result[c1][i + 1] == 0)
2825 candidate[(i / 4)] = c2;
2826 else if (result[c2][i] + result[c2][i + 1] == 0)
2827 candidate[(i / 4)] = c1;
2828 else
2829 simubitmap = simubitmap | (1 << i);
2830 } else {
2831 simubitmap = simubitmap | (1 << i);
2836 if (simubitmap == 0) {
2837 for (i = 0; i < (bound / 4); i++) {
2838 if (candidate[i] >= 0) {
2839 for (j = i * 4; j < (i + 1) * 4 - 2; j++)
2840 result[3][j] = result[candidate[i]][j];
2841 retval = false;
2844 return retval;
2845 } else if (!(simubitmap & 0x0f)) {
2846 /* path A OK */
2847 for (i = 0; i < 4; i++)
2848 result[3][i] = result[c1][i];
2849 } else if (!(simubitmap & 0xf0) && priv->tx_paths > 1) {
2850 /* path B OK */
2851 for (i = 4; i < 8; i++)
2852 result[3][i] = result[c1][i];
2855 return false;
2858 bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv,
2859 int result[][8], int c1, int c2)
2861 u32 i, j, diff, simubitmap, bound = 0;
2862 int candidate[2] = {-1, -1}; /* for path A and path B */
2863 int tmp1, tmp2;
2864 bool retval = true;
2866 if (priv->tx_paths > 1)
2867 bound = 8;
2868 else
2869 bound = 4;
2871 simubitmap = 0;
2873 for (i = 0; i < bound; i++) {
2874 if (i & 1) {
2875 if ((result[c1][i] & 0x00000200))
2876 tmp1 = result[c1][i] | 0xfffffc00;
2877 else
2878 tmp1 = result[c1][i];
2880 if ((result[c2][i]& 0x00000200))
2881 tmp2 = result[c2][i] | 0xfffffc00;
2882 else
2883 tmp2 = result[c2][i];
2884 } else {
2885 tmp1 = result[c1][i];
2886 tmp2 = result[c2][i];
2889 diff = (tmp1 > tmp2) ? (tmp1 - tmp2) : (tmp2 - tmp1);
2891 if (diff > MAX_TOLERANCE) {
2892 if ((i == 2 || i == 6) && !simubitmap) {
2893 if (result[c1][i] + result[c1][i + 1] == 0)
2894 candidate[(i / 4)] = c2;
2895 else if (result[c2][i] + result[c2][i + 1] == 0)
2896 candidate[(i / 4)] = c1;
2897 else
2898 simubitmap = simubitmap | (1 << i);
2899 } else {
2900 simubitmap = simubitmap | (1 << i);
2905 if (simubitmap == 0) {
2906 for (i = 0; i < (bound / 4); i++) {
2907 if (candidate[i] >= 0) {
2908 for (j = i * 4; j < (i + 1) * 4 - 2; j++)
2909 result[3][j] = result[candidate[i]][j];
2910 retval = false;
2913 return retval;
2914 } else {
2915 if (!(simubitmap & 0x03)) {
2916 /* path A TX OK */
2917 for (i = 0; i < 2; i++)
2918 result[3][i] = result[c1][i];
2921 if (!(simubitmap & 0x0c)) {
2922 /* path A RX OK */
2923 for (i = 2; i < 4; i++)
2924 result[3][i] = result[c1][i];
2927 if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
2928 /* path B RX OK */
2929 for (i = 4; i < 6; i++)
2930 result[3][i] = result[c1][i];
2933 if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
2934 /* path B RX OK */
2935 for (i = 6; i < 8; i++)
2936 result[3][i] = result[c1][i];
2940 return false;
2943 void
2944 rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup)
2946 int i;
2948 for (i = 0; i < (RTL8XXXU_MAC_REGS - 1); i++)
2949 backup[i] = rtl8xxxu_read8(priv, reg[i]);
2951 backup[i] = rtl8xxxu_read32(priv, reg[i]);
2954 void rtl8xxxu_restore_mac_regs(struct rtl8xxxu_priv *priv,
2955 const u32 *reg, u32 *backup)
2957 int i;
2959 for (i = 0; i < (RTL8XXXU_MAC_REGS - 1); i++)
2960 rtl8xxxu_write8(priv, reg[i], backup[i]);
2962 rtl8xxxu_write32(priv, reg[i], backup[i]);
2965 void rtl8xxxu_save_regs(struct rtl8xxxu_priv *priv, const u32 *regs,
2966 u32 *backup, int count)
2968 int i;
2970 for (i = 0; i < count; i++)
2971 backup[i] = rtl8xxxu_read32(priv, regs[i]);
2974 void rtl8xxxu_restore_regs(struct rtl8xxxu_priv *priv, const u32 *regs,
2975 u32 *backup, int count)
2977 int i;
2979 for (i = 0; i < count; i++)
2980 rtl8xxxu_write32(priv, regs[i], backup[i]);
2984 void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs,
2985 bool path_a_on)
2987 u32 path_on;
2988 int i;
2990 if (priv->tx_paths == 1) {
2991 path_on = priv->fops->adda_1t_path_on;
2992 rtl8xxxu_write32(priv, regs[0], priv->fops->adda_1t_init);
2993 } else {
2994 path_on = path_a_on ? priv->fops->adda_2t_path_on_a :
2995 priv->fops->adda_2t_path_on_b;
2997 rtl8xxxu_write32(priv, regs[0], path_on);
3000 for (i = 1 ; i < RTL8XXXU_ADDA_REGS ; i++)
3001 rtl8xxxu_write32(priv, regs[i], path_on);
3004 void rtl8xxxu_mac_calibration(struct rtl8xxxu_priv *priv,
3005 const u32 *regs, u32 *backup)
3007 int i = 0;
3009 rtl8xxxu_write8(priv, regs[i], 0x3f);
3011 for (i = 1 ; i < (RTL8XXXU_MAC_REGS - 1); i++)
3012 rtl8xxxu_write8(priv, regs[i], (u8)(backup[i] & ~BIT(3)));
3014 rtl8xxxu_write8(priv, regs[i], (u8)(backup[i] & ~BIT(5)));
3017 static int rtl8xxxu_iqk_path_a(struct rtl8xxxu_priv *priv)
3019 u32 reg_eac, reg_e94, reg_e9c, reg_ea4, val32;
3020 int result = 0;
3022 /* path-A IQK setting */
3023 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1f);
3024 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x10008c1f);
3025 rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140102);
3027 val32 = (priv->rf_paths > 1) ? 0x28160202 :
3028 /*IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)?0x28160202: */
3029 0x28160502;
3030 rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, val32);
3032 /* path-B IQK setting */
3033 if (priv->rf_paths > 1) {
3034 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x10008c22);
3035 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x10008c22);
3036 rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82140102);
3037 rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28160202);
3040 /* LO calibration setting */
3041 rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x001028d1);
3043 /* One shot, path A LOK & IQK */
3044 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
3045 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
3047 mdelay(1);
3049 /* Check failed */
3050 reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
3051 reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
3052 reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
3053 reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
3055 if (!(reg_eac & BIT(28)) &&
3056 ((reg_e94 & 0x03ff0000) != 0x01420000) &&
3057 ((reg_e9c & 0x03ff0000) != 0x00420000))
3058 result |= 0x01;
3059 else /* If TX not OK, ignore RX */
3060 goto out;
3062 /* If TX is OK, check whether RX is OK */
3063 if (!(reg_eac & BIT(27)) &&
3064 ((reg_ea4 & 0x03ff0000) != 0x01320000) &&
3065 ((reg_eac & 0x03ff0000) != 0x00360000))
3066 result |= 0x02;
3067 else
3068 dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n",
3069 __func__);
3070 out:
3071 return result;
3074 static int rtl8xxxu_iqk_path_b(struct rtl8xxxu_priv *priv)
3076 u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc;
3077 int result = 0;
3079 /* One shot, path B LOK & IQK */
3080 rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002);
3081 rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000);
3083 mdelay(1);
3085 /* Check failed */
3086 reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
3087 reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
3088 reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
3089 reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
3090 reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
3092 if (!(reg_eac & BIT(31)) &&
3093 ((reg_eb4 & 0x03ff0000) != 0x01420000) &&
3094 ((reg_ebc & 0x03ff0000) != 0x00420000))
3095 result |= 0x01;
3096 else
3097 goto out;
3099 if (!(reg_eac & BIT(30)) &&
3100 (((reg_ec4 & 0x03ff0000) >> 16) != 0x132) &&
3101 (((reg_ecc & 0x03ff0000) >> 16) != 0x36))
3102 result |= 0x02;
3103 else
3104 dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
3105 __func__);
3106 out:
3107 return result;
3110 static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
3111 int result[][8], int t)
3113 struct device *dev = &priv->udev->dev;
3114 u32 i, val32;
3115 int path_a_ok, path_b_ok;
3116 int retry = 2;
3117 static const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
3118 REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
3119 REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
3120 REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
3121 REG_TX_OFDM_BBON, REG_TX_TO_RX,
3122 REG_TX_TO_TX, REG_RX_CCK,
3123 REG_RX_OFDM, REG_RX_WAIT_RIFS,
3124 REG_RX_TO_RX, REG_STANDBY,
3125 REG_SLEEP, REG_PMPD_ANAEN
3127 static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
3128 REG_TXPAUSE, REG_BEACON_CTRL,
3129 REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
3131 static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
3132 REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
3133 REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
3134 REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
3135 REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
3139 * Note: IQ calibration must be performed after loading
3140 * PHY_REG.txt , and radio_a, radio_b.txt
3143 if (t == 0) {
3144 /* Save ADDA parameters, turn Path A ADDA on */
3145 rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
3146 RTL8XXXU_ADDA_REGS);
3147 rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
3148 rtl8xxxu_save_regs(priv, iqk_bb_regs,
3149 priv->bb_backup, RTL8XXXU_BB_REGS);
3152 rtl8xxxu_path_adda_on(priv, adda_regs, true);
3154 if (t == 0) {
3155 val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
3156 if (val32 & FPGA0_HSSI_PARM1_PI)
3157 priv->pi_enabled = 1;
3160 if (!priv->pi_enabled) {
3161 /* Switch BB to PI mode to do IQ Calibration. */
3162 rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
3163 rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100);
3166 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
3167 val32 &= ~FPGA_RF_MODE_CCK;
3168 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
3170 rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
3171 rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
3172 rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
3174 if (!priv->no_pape) {
3175 val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL);
3176 val32 |= (FPGA0_RF_PAPE |
3177 (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
3178 rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
3181 val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE);
3182 val32 &= ~BIT(10);
3183 rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32);
3184 val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
3185 val32 &= ~BIT(10);
3186 rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32);
3188 if (priv->tx_paths > 1) {
3189 rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
3190 rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, 0x00010000);
3193 /* MAC settings */
3194 rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
3196 /* Page B init */
3197 rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x00080000);
3199 if (priv->tx_paths > 1)
3200 rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x00080000);
3202 /* IQ calibration setting */
3203 rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
3204 rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
3205 rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
3207 for (i = 0; i < retry; i++) {
3208 path_a_ok = rtl8xxxu_iqk_path_a(priv);
3209 if (path_a_ok == 0x03) {
3210 val32 = rtl8xxxu_read32(priv,
3211 REG_TX_POWER_BEFORE_IQK_A);
3212 result[t][0] = (val32 >> 16) & 0x3ff;
3213 val32 = rtl8xxxu_read32(priv,
3214 REG_TX_POWER_AFTER_IQK_A);
3215 result[t][1] = (val32 >> 16) & 0x3ff;
3216 val32 = rtl8xxxu_read32(priv,
3217 REG_RX_POWER_BEFORE_IQK_A_2);
3218 result[t][2] = (val32 >> 16) & 0x3ff;
3219 val32 = rtl8xxxu_read32(priv,
3220 REG_RX_POWER_AFTER_IQK_A_2);
3221 result[t][3] = (val32 >> 16) & 0x3ff;
3222 break;
3223 } else if (i == (retry - 1) && path_a_ok == 0x01) {
3224 /* TX IQK OK */
3225 dev_dbg(dev, "%s: Path A IQK Only Tx Success!!\n",
3226 __func__);
3228 val32 = rtl8xxxu_read32(priv,
3229 REG_TX_POWER_BEFORE_IQK_A);
3230 result[t][0] = (val32 >> 16) & 0x3ff;
3231 val32 = rtl8xxxu_read32(priv,
3232 REG_TX_POWER_AFTER_IQK_A);
3233 result[t][1] = (val32 >> 16) & 0x3ff;
3237 if (!path_a_ok)
3238 dev_dbg(dev, "%s: Path A IQK failed!\n", __func__);
3240 if (priv->tx_paths > 1) {
3242 * Path A into standby
3244 rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x0);
3245 rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
3246 rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
3248 /* Turn Path B ADDA on */
3249 rtl8xxxu_path_adda_on(priv, adda_regs, false);
3251 for (i = 0; i < retry; i++) {
3252 path_b_ok = rtl8xxxu_iqk_path_b(priv);
3253 if (path_b_ok == 0x03) {
3254 val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
3255 result[t][4] = (val32 >> 16) & 0x3ff;
3256 val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
3257 result[t][5] = (val32 >> 16) & 0x3ff;
3258 val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
3259 result[t][6] = (val32 >> 16) & 0x3ff;
3260 val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
3261 result[t][7] = (val32 >> 16) & 0x3ff;
3262 break;
3263 } else if (i == (retry - 1) && path_b_ok == 0x01) {
3264 /* TX IQK OK */
3265 val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
3266 result[t][4] = (val32 >> 16) & 0x3ff;
3267 val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
3268 result[t][5] = (val32 >> 16) & 0x3ff;
3272 if (!path_b_ok)
3273 dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
3276 /* Back to BB mode, load original value */
3277 rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0);
3279 if (t) {
3280 if (!priv->pi_enabled) {
3282 * Switch back BB to SI mode after finishing
3283 * IQ Calibration
3285 val32 = 0x01000000;
3286 rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32);
3287 rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32);
3290 /* Reload ADDA power saving parameters */
3291 rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
3292 RTL8XXXU_ADDA_REGS);
3294 /* Reload MAC parameters */
3295 rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
3297 /* Reload BB parameters */
3298 rtl8xxxu_restore_regs(priv, iqk_bb_regs,
3299 priv->bb_backup, RTL8XXXU_BB_REGS);
3301 /* Restore RX initial gain */
3302 rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00032ed3);
3304 if (priv->tx_paths > 1) {
3305 rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM,
3306 0x00032ed3);
3309 /* Load 0xe30 IQC default value */
3310 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
3311 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
3315 void rtl8xxxu_gen2_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start)
3317 struct h2c_cmd h2c;
3319 memset(&h2c, 0, sizeof(struct h2c_cmd));
3320 h2c.bt_wlan_calibration.cmd = H2C_8723B_BT_WLAN_CALIBRATION;
3321 h2c.bt_wlan_calibration.data = start;
3323 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration));
3326 void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
3328 struct device *dev = &priv->udev->dev;
3329 int result[4][8]; /* last is final result */
3330 int i, candidate;
3331 bool path_a_ok, path_b_ok;
3332 u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
3333 u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
3334 s32 reg_tmp = 0;
3335 bool simu;
3337 memset(result, 0, sizeof(result));
3338 candidate = -1;
3340 path_a_ok = false;
3341 path_b_ok = false;
3343 rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
3345 for (i = 0; i < 3; i++) {
3346 rtl8xxxu_phy_iqcalibrate(priv, result, i);
3348 if (i == 1) {
3349 simu = rtl8xxxu_simularity_compare(priv, result, 0, 1);
3350 if (simu) {
3351 candidate = 0;
3352 break;
3356 if (i == 2) {
3357 simu = rtl8xxxu_simularity_compare(priv, result, 0, 2);
3358 if (simu) {
3359 candidate = 0;
3360 break;
3363 simu = rtl8xxxu_simularity_compare(priv, result, 1, 2);
3364 if (simu) {
3365 candidate = 1;
3366 } else {
3367 for (i = 0; i < 8; i++)
3368 reg_tmp += result[3][i];
3370 if (reg_tmp)
3371 candidate = 3;
3372 else
3373 candidate = -1;
3378 for (i = 0; i < 4; i++) {
3379 reg_e94 = result[i][0];
3380 reg_e9c = result[i][1];
3381 reg_ea4 = result[i][2];
3382 reg_eac = result[i][3];
3383 reg_eb4 = result[i][4];
3384 reg_ebc = result[i][5];
3385 reg_ec4 = result[i][6];
3386 reg_ecc = result[i][7];
3389 if (candidate >= 0) {
3390 reg_e94 = result[candidate][0];
3391 priv->rege94 = reg_e94;
3392 reg_e9c = result[candidate][1];
3393 priv->rege9c = reg_e9c;
3394 reg_ea4 = result[candidate][2];
3395 reg_eac = result[candidate][3];
3396 reg_eb4 = result[candidate][4];
3397 priv->regeb4 = reg_eb4;
3398 reg_ebc = result[candidate][5];
3399 priv->regebc = reg_ebc;
3400 reg_ec4 = result[candidate][6];
3401 reg_ecc = result[candidate][7];
3402 dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
3403 dev_dbg(dev,
3404 "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n",
3405 __func__, reg_e94, reg_e9c,
3406 reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
3407 path_a_ok = true;
3408 path_b_ok = true;
3409 } else {
3410 reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
3411 reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
3414 if (reg_e94 && candidate >= 0)
3415 rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
3416 candidate, (reg_ea4 == 0));
3418 if (priv->tx_paths > 1 && reg_eb4)
3419 rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
3420 candidate, (reg_ec4 == 0));
3422 rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg,
3423 priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
3426 static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
3428 u32 val32;
3429 u32 rf_amode, rf_bmode = 0, lstf;
3431 /* Check continuous TX and Packet TX */
3432 lstf = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
3434 if (lstf & OFDM_LSTF_MASK) {
3435 /* Disable all continuous TX */
3436 val32 = lstf & ~OFDM_LSTF_MASK;
3437 rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
3439 /* Read original RF mode Path A */
3440 rf_amode = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_AC);
3442 /* Set RF mode to standby Path A */
3443 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC,
3444 (rf_amode & 0x8ffff) | 0x10000);
3446 /* Path-B */
3447 if (priv->tx_paths > 1) {
3448 rf_bmode = rtl8xxxu_read_rfreg(priv, RF_B,
3449 RF6052_REG_AC);
3451 rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC,
3452 (rf_bmode & 0x8ffff) | 0x10000);
3454 } else {
3455 /* Deal with Packet TX case */
3456 /* block all queues */
3457 rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
3460 /* Start LC calibration */
3461 if (priv->fops->has_s0s1)
3462 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdfbe0);
3463 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
3464 val32 |= 0x08000;
3465 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
3467 msleep(100);
3469 if (priv->fops->has_s0s1)
3470 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdffe0);
3472 /* Restore original parameters */
3473 if (lstf & OFDM_LSTF_MASK) {
3474 /* Path-A */
3475 rtl8xxxu_write32(priv, REG_OFDM1_LSTF, lstf);
3476 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, rf_amode);
3478 /* Path-B */
3479 if (priv->tx_paths > 1)
3480 rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC,
3481 rf_bmode);
3482 } else /* Deal with Packet TX case */
3483 rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
3486 static int rtl8xxxu_set_mac(struct rtl8xxxu_priv *priv)
3488 int i;
3489 u16 reg;
3491 reg = REG_MACID;
3493 for (i = 0; i < ETH_ALEN; i++)
3494 rtl8xxxu_write8(priv, reg + i, priv->mac_addr[i]);
3496 return 0;
3499 static int rtl8xxxu_set_bssid(struct rtl8xxxu_priv *priv, const u8 *bssid)
3501 int i;
3502 u16 reg;
3504 dev_dbg(&priv->udev->dev, "%s: (%pM)\n", __func__, bssid);
3506 reg = REG_BSSID;
3508 for (i = 0; i < ETH_ALEN; i++)
3509 rtl8xxxu_write8(priv, reg + i, bssid[i]);
3511 return 0;
3514 static void
3515 rtl8xxxu_set_ampdu_factor(struct rtl8xxxu_priv *priv, u8 ampdu_factor)
3517 u8 vals[4] = { 0x41, 0xa8, 0x72, 0xb9 };
3518 u8 max_agg = 0xf;
3519 int i;
3521 ampdu_factor = 1 << (ampdu_factor + 2);
3522 if (ampdu_factor > max_agg)
3523 ampdu_factor = max_agg;
3525 for (i = 0; i < 4; i++) {
3526 if ((vals[i] & 0xf0) > (ampdu_factor << 4))
3527 vals[i] = (vals[i] & 0x0f) | (ampdu_factor << 4);
3529 if ((vals[i] & 0x0f) > ampdu_factor)
3530 vals[i] = (vals[i] & 0xf0) | ampdu_factor;
3532 rtl8xxxu_write8(priv, REG_AGGLEN_LMT + i, vals[i]);
3536 static void rtl8xxxu_set_ampdu_min_space(struct rtl8xxxu_priv *priv, u8 density)
3538 u8 val8;
3540 val8 = rtl8xxxu_read8(priv, REG_AMPDU_MIN_SPACE);
3541 val8 &= 0xf8;
3542 val8 |= density;
3543 rtl8xxxu_write8(priv, REG_AMPDU_MIN_SPACE, val8);
3546 static int rtl8xxxu_active_to_emu(struct rtl8xxxu_priv *priv)
3548 u8 val8;
3549 int count, ret = 0;
3551 /* Start of rtl8723AU_card_enable_flow */
3552 /* Act to Cardemu sequence*/
3553 /* Turn off RF */
3554 rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
3556 /* 0x004E[7] = 0, switch DPDT_SEL_P output from register 0x0065[2] */
3557 val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
3558 val8 &= ~LEDCFG2_DPDT_SELECT;
3559 rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
3561 /* 0x0005[1] = 1 turn off MAC by HW state machine*/
3562 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
3563 val8 |= BIT(1);
3564 rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
3566 for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
3567 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
3568 if ((val8 & BIT(1)) == 0)
3569 break;
3570 udelay(10);
3573 if (!count) {
3574 dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
3575 __func__);
3576 ret = -EBUSY;
3577 goto exit;
3580 /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */
3581 val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
3582 val8 |= SYS_ISO_ANALOG_IPS;
3583 rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
3585 /* 0x0020[0] = 0 disable LDOA12 MACRO block*/
3586 val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
3587 val8 &= ~LDOA15_ENABLE;
3588 rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
3590 exit:
3591 return ret;
3594 int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv)
3596 u8 val8;
3597 u8 val32;
3598 int count, ret = 0;
3600 rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
3603 * Poll - wait for RX packet to complete
3605 for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
3606 val32 = rtl8xxxu_read32(priv, 0x5f8);
3607 if (!val32)
3608 break;
3609 udelay(10);
3612 if (!count) {
3613 dev_warn(&priv->udev->dev,
3614 "%s: RX poll timed out (0x05f8)\n", __func__);
3615 ret = -EBUSY;
3616 goto exit;
3619 /* Disable CCK and OFDM, clock gated */
3620 val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
3621 val8 &= ~SYS_FUNC_BBRSTB;
3622 rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
3624 udelay(2);
3626 /* Reset baseband */
3627 val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
3628 val8 &= ~SYS_FUNC_BB_GLB_RSTN;
3629 rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
3631 /* Reset MAC TRX */
3632 val8 = rtl8xxxu_read8(priv, REG_CR);
3633 val8 = CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE;
3634 rtl8xxxu_write8(priv, REG_CR, val8);
3636 /* Reset MAC TRX */
3637 val8 = rtl8xxxu_read8(priv, REG_CR + 1);
3638 val8 &= ~BIT(1); /* CR_SECURITY_ENABLE */
3639 rtl8xxxu_write8(priv, REG_CR + 1, val8);
3641 /* Respond TX OK to scheduler */
3642 val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
3643 val8 |= DUAL_TSF_TX_OK;
3644 rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
3646 exit:
3647 return ret;
3650 void rtl8xxxu_disabled_to_emu(struct rtl8xxxu_priv *priv)
3652 u8 val8;
3654 /* Clear suspend enable and power down enable*/
3655 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
3656 val8 &= ~(BIT(3) | BIT(7));
3657 rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
3659 /* 0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/
3660 val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2);
3661 val8 &= ~BIT(0);
3662 rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8);
3664 /* 0x04[12:11] = 11 enable WL suspend*/
3665 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
3666 val8 &= ~(BIT(3) | BIT(4));
3667 rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
3670 static int rtl8xxxu_emu_to_disabled(struct rtl8xxxu_priv *priv)
3672 u8 val8;
3674 /* 0x0007[7:0] = 0x20 SOP option to disable BG/MB */
3675 rtl8xxxu_write8(priv, REG_APS_FSMCO + 3, 0x20);
3677 /* 0x04[12:11] = 01 enable WL suspend */
3678 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
3679 val8 &= ~BIT(4);
3680 val8 |= BIT(3);
3681 rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
3683 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
3684 val8 |= BIT(7);
3685 rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
3687 /* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */
3688 val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2);
3689 val8 |= BIT(0);
3690 rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8);
3692 return 0;
3695 int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv)
3697 struct device *dev = &priv->udev->dev;
3698 u32 val32;
3699 int retry, retval;
3701 rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
3703 val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM);
3704 val32 |= RXPKT_NUM_RW_RELEASE_EN;
3705 rtl8xxxu_write32(priv, REG_RXPKT_NUM, val32);
3707 retry = 100;
3708 retval = -EBUSY;
3710 do {
3711 val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM);
3712 if (val32 & RXPKT_NUM_RXDMA_IDLE) {
3713 retval = 0;
3714 break;
3716 } while (retry--);
3718 rtl8xxxu_write16(priv, REG_RQPN_NPQ, 0);
3719 rtl8xxxu_write32(priv, REG_RQPN, 0x80000000);
3720 mdelay(2);
3722 if (!retry)
3723 dev_warn(dev, "Failed to flush FIFO\n");
3725 return retval;
3728 void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv)
3730 /* Fix USB interface interference issue */
3731 rtl8xxxu_write8(priv, 0xfe40, 0xe0);
3732 rtl8xxxu_write8(priv, 0xfe41, 0x8d);
3733 rtl8xxxu_write8(priv, 0xfe42, 0x80);
3735 * This sets TXDMA_OFFSET_DROP_DATA_EN (bit 9) as well as bits
3736 * 8 and 5, for which I have found no documentation.
3738 rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320);
3741 * Solve too many protocol error on USB bus.
3742 * Can't do this for 8188/8192 UMC A cut parts
3744 if (!(!priv->chip_cut && priv->vendor_umc)) {
3745 rtl8xxxu_write8(priv, 0xfe40, 0xe6);
3746 rtl8xxxu_write8(priv, 0xfe41, 0x94);
3747 rtl8xxxu_write8(priv, 0xfe42, 0x80);
3749 rtl8xxxu_write8(priv, 0xfe40, 0xe0);
3750 rtl8xxxu_write8(priv, 0xfe41, 0x19);
3751 rtl8xxxu_write8(priv, 0xfe42, 0x80);
3753 rtl8xxxu_write8(priv, 0xfe40, 0xe5);
3754 rtl8xxxu_write8(priv, 0xfe41, 0x91);
3755 rtl8xxxu_write8(priv, 0xfe42, 0x80);
3757 rtl8xxxu_write8(priv, 0xfe40, 0xe2);
3758 rtl8xxxu_write8(priv, 0xfe41, 0x81);
3759 rtl8xxxu_write8(priv, 0xfe42, 0x80);
3763 void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv)
3765 u32 val32;
3767 val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
3768 val32 |= TXDMA_OFFSET_DROP_DATA_EN;
3769 rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
3772 void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv)
3774 u8 val8;
3775 u16 val16;
3776 u32 val32;
3779 * Workaround for 8188RU LNA power leakage problem.
3781 if (priv->rtl_chip == RTL8188R) {
3782 val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM);
3783 val32 |= BIT(1);
3784 rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32);
3787 rtl8xxxu_flush_fifo(priv);
3789 rtl8xxxu_active_to_lps(priv);
3791 /* Turn off RF */
3792 rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
3794 /* Reset Firmware if running in RAM */
3795 if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
3796 rtl8xxxu_firmware_self_reset(priv);
3798 /* Reset MCU */
3799 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
3800 val16 &= ~SYS_FUNC_CPU_ENABLE;
3801 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
3803 /* Reset MCU ready status */
3804 rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
3806 rtl8xxxu_active_to_emu(priv);
3807 rtl8xxxu_emu_to_disabled(priv);
3809 /* Reset MCU IO Wrapper */
3810 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
3811 val8 &= ~BIT(0);
3812 rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
3814 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
3815 val8 |= BIT(0);
3816 rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
3818 /* RSV_CTRL 0x1C[7:0] = 0x0e lock ISO/CLK/Power control register */
3819 rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0e);
3822 void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv,
3823 u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5)
3825 struct h2c_cmd h2c;
3827 memset(&h2c, 0, sizeof(struct h2c_cmd));
3828 h2c.b_type_dma.cmd = H2C_8723B_B_TYPE_TDMA;
3829 h2c.b_type_dma.data1 = arg1;
3830 h2c.b_type_dma.data2 = arg2;
3831 h2c.b_type_dma.data3 = arg3;
3832 h2c.b_type_dma.data4 = arg4;
3833 h2c.b_type_dma.data5 = arg5;
3834 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.b_type_dma));
3837 void rtl8xxxu_gen2_disable_rf(struct rtl8xxxu_priv *priv)
3839 u32 val32;
3841 val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA);
3842 val32 &= ~(BIT(22) | BIT(23));
3843 rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32);
3846 static void rtl8xxxu_init_queue_reserved_page(struct rtl8xxxu_priv *priv)
3848 struct rtl8xxxu_fileops *fops = priv->fops;
3849 u32 hq, lq, nq, eq, pubq;
3850 u32 val32;
3852 hq = 0;
3853 lq = 0;
3854 nq = 0;
3855 eq = 0;
3856 pubq = 0;
3858 if (priv->ep_tx_high_queue)
3859 hq = fops->page_num_hi;
3860 if (priv->ep_tx_low_queue)
3861 lq = fops->page_num_lo;
3862 if (priv->ep_tx_normal_queue)
3863 nq = fops->page_num_norm;
3865 val32 = (nq << RQPN_NPQ_SHIFT) | (eq << RQPN_EPQ_SHIFT);
3866 rtl8xxxu_write32(priv, REG_RQPN_NPQ, val32);
3868 pubq = fops->total_page_num - hq - lq - nq - 1;
3870 val32 = RQPN_LOAD;
3871 val32 |= (hq << RQPN_HI_PQ_SHIFT);
3872 val32 |= (lq << RQPN_LO_PQ_SHIFT);
3873 val32 |= (pubq << RQPN_PUB_PQ_SHIFT);
3875 rtl8xxxu_write32(priv, REG_RQPN, val32);
3878 static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
3880 struct rtl8xxxu_priv *priv = hw->priv;
3881 struct device *dev = &priv->udev->dev;
3882 struct rtl8xxxu_fileops *fops = priv->fops;
3883 bool macpower;
3884 int ret;
3885 u8 val8;
3886 u16 val16;
3887 u32 val32;
3889 /* Check if MAC is already powered on */
3890 val8 = rtl8xxxu_read8(priv, REG_CR);
3891 val16 = rtl8xxxu_read16(priv, REG_SYS_CLKR);
3894 * Fix 92DU-VC S3 hang with the reason is that secondary mac is not
3895 * initialized. First MAC returns 0xea, second MAC returns 0x00
3897 if (val8 == 0xea || !(val16 & SYS_CLK_MAC_CLK_ENABLE))
3898 macpower = false;
3899 else
3900 macpower = true;
3902 if (fops->needs_full_init)
3903 macpower = false;
3905 ret = fops->power_on(priv);
3906 if (ret < 0) {
3907 dev_warn(dev, "%s: Failed power on\n", __func__);
3908 goto exit;
3911 if (!macpower)
3912 rtl8xxxu_init_queue_reserved_page(priv);
3914 ret = rtl8xxxu_init_queue_priority(priv);
3915 dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret);
3916 if (ret)
3917 goto exit;
3920 * Set RX page boundary
3922 rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, fops->trxff_boundary);
3924 ret = rtl8xxxu_download_firmware(priv);
3925 dev_dbg(dev, "%s: download_firmware %i\n", __func__, ret);
3926 if (ret)
3927 goto exit;
3928 ret = rtl8xxxu_start_firmware(priv);
3929 dev_dbg(dev, "%s: start_firmware %i\n", __func__, ret);
3930 if (ret)
3931 goto exit;
3933 if (fops->phy_init_antenna_selection)
3934 fops->phy_init_antenna_selection(priv);
3936 ret = rtl8xxxu_init_mac(priv);
3938 dev_dbg(dev, "%s: init_mac %i\n", __func__, ret);
3939 if (ret)
3940 goto exit;
3942 ret = rtl8xxxu_init_phy_bb(priv);
3943 dev_dbg(dev, "%s: init_phy_bb %i\n", __func__, ret);
3944 if (ret)
3945 goto exit;
3947 ret = fops->init_phy_rf(priv);
3948 if (ret)
3949 goto exit;
3951 /* RFSW Control - clear bit 14 ?? */
3952 if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E)
3953 rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003);
3955 val32 = FPGA0_RF_TRSW | FPGA0_RF_TRSWB | FPGA0_RF_ANTSW |
3956 FPGA0_RF_ANTSWB |
3957 ((FPGA0_RF_ANTSW | FPGA0_RF_ANTSWB) << FPGA0_RF_BD_CTRL_SHIFT);
3958 if (!priv->no_pape) {
3959 val32 |= (FPGA0_RF_PAPE |
3960 (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
3962 rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
3964 /* 0x860[6:5]= 00 - why? - this sets antenna B */
3965 if (priv->rtl_chip != RTL8192E)
3966 rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, 0x66f60210);
3968 if (!macpower) {
3970 * Set TX buffer boundary
3972 val8 = fops->total_page_num + 1;
3974 rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8);
3975 rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8);
3976 rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8);
3977 rtl8xxxu_write8(priv, REG_TRXFF_BNDY, val8);
3978 rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8);
3982 * The vendor drivers set PBP for all devices, except 8192e.
3983 * There is no explanation for this in any of the sources.
3985 val8 = (fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) |
3986 (fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT);
3987 if (priv->rtl_chip != RTL8192E)
3988 rtl8xxxu_write8(priv, REG_PBP, val8);
3990 dev_dbg(dev, "%s: macpower %i\n", __func__, macpower);
3991 if (!macpower) {
3992 ret = fops->llt_init(priv);
3993 if (ret) {
3994 dev_warn(dev, "%s: LLT table init failed\n", __func__);
3995 goto exit;
3999 * Chip specific quirks
4001 fops->usb_quirks(priv);
4004 * Enable TX report and TX report timer for 8723bu/8188eu/...
4006 if (fops->has_tx_report) {
4007 val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
4008 val8 |= TX_REPORT_CTRL_TIMER_ENABLE;
4009 rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
4010 /* Set MAX RPT MACID */
4011 rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02);
4012 /* TX report Timer. Unit: 32us */
4013 rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0);
4015 /* tmp ps ? */
4016 val8 = rtl8xxxu_read8(priv, 0xa3);
4017 val8 &= 0xf8;
4018 rtl8xxxu_write8(priv, 0xa3, val8);
4023 * Unit in 8 bytes, not obvious what it is used for
4025 rtl8xxxu_write8(priv, REG_RX_DRVINFO_SZ, 4);
4027 if (priv->rtl_chip == RTL8192E) {
4028 rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
4029 rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
4030 } else {
4032 * Enable all interrupts - not obvious USB needs to do this
4034 rtl8xxxu_write32(priv, REG_HISR, 0xffffffff);
4035 rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff);
4038 rtl8xxxu_set_mac(priv);
4039 rtl8xxxu_set_linktype(priv, NL80211_IFTYPE_STATION);
4042 * Configure initial WMAC settings
4044 val32 = RCR_ACCEPT_PHYS_MATCH | RCR_ACCEPT_MCAST | RCR_ACCEPT_BCAST |
4045 RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL |
4046 RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC;
4047 rtl8xxxu_write32(priv, REG_RCR, val32);
4050 * Accept all multicast
4052 rtl8xxxu_write32(priv, REG_MAR, 0xffffffff);
4053 rtl8xxxu_write32(priv, REG_MAR + 4, 0xffffffff);
4056 * Init adaptive controls
4058 val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
4059 val32 &= ~RESPONSE_RATE_BITMAP_ALL;
4060 val32 |= RESPONSE_RATE_RRSR_CCK_ONLY_1M;
4061 rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
4063 /* CCK = 0x0a, OFDM = 0x10 */
4064 rtl8xxxu_set_spec_sifs(priv, 0x10, 0x10);
4065 rtl8xxxu_set_retry(priv, 0x30, 0x30);
4066 rtl8xxxu_set_spec_sifs(priv, 0x0a, 0x10);
4069 * Init EDCA
4071 rtl8xxxu_write16(priv, REG_MAC_SPEC_SIFS, 0x100a);
4073 /* Set CCK SIFS */
4074 rtl8xxxu_write16(priv, REG_SIFS_CCK, 0x100a);
4076 /* Set OFDM SIFS */
4077 rtl8xxxu_write16(priv, REG_SIFS_OFDM, 0x100a);
4079 /* TXOP */
4080 rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, 0x005ea42b);
4081 rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, 0x0000a44f);
4082 rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, 0x005ea324);
4083 rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, 0x002fa226);
4085 /* Set data auto rate fallback retry count */
4086 rtl8xxxu_write32(priv, REG_DARFRC, 0x00000000);
4087 rtl8xxxu_write32(priv, REG_DARFRC + 4, 0x10080404);
4088 rtl8xxxu_write32(priv, REG_RARFRC, 0x04030201);
4089 rtl8xxxu_write32(priv, REG_RARFRC + 4, 0x08070605);
4091 val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL);
4092 val8 |= FWHW_TXQ_CTRL_AMPDU_RETRY;
4093 rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, val8);
4095 /* Set ACK timeout */
4096 rtl8xxxu_write8(priv, REG_ACKTO, 0x40);
4099 * Initialize beacon parameters
4101 val16 = BEACON_DISABLE_TSF_UPDATE | (BEACON_DISABLE_TSF_UPDATE << 8);
4102 rtl8xxxu_write16(priv, REG_BEACON_CTRL, val16);
4103 rtl8xxxu_write16(priv, REG_TBTT_PROHIBIT, 0x6404);
4104 rtl8xxxu_write8(priv, REG_DRIVER_EARLY_INT, DRIVER_EARLY_INT_TIME);
4105 rtl8xxxu_write8(priv, REG_BEACON_DMA_TIME, BEACON_DMA_ATIME_INT_TIME);
4106 rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F);
4109 * Initialize burst parameters
4111 if (priv->rtl_chip == RTL8723B) {
4113 * For USB high speed set 512B packets
4115 val8 = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B);
4116 val8 &= ~(BIT(4) | BIT(5));
4117 val8 |= BIT(4);
4118 val8 |= BIT(1) | BIT(2) | BIT(3);
4119 rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, val8);
4122 * For USB high speed set 512B packets
4124 val8 = rtl8xxxu_read8(priv, REG_HT_SINGLE_AMPDU_8723B);
4125 val8 |= BIT(7);
4126 rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8);
4128 rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14);
4129 rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, 0x5e);
4130 rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff);
4131 rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18);
4132 rtl8xxxu_write8(priv, REG_PIFS, 0x00);
4133 rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, 0x50);
4134 rtl8xxxu_write8(priv, REG_USTIME_EDCA, 0x50);
4136 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
4137 val8 |= BIT(5) | BIT(6);
4138 rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
4141 if (fops->init_aggregation)
4142 fops->init_aggregation(priv);
4145 * Enable CCK and OFDM block
4147 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
4148 val32 |= (FPGA_RF_MODE_CCK | FPGA_RF_MODE_OFDM);
4149 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
4152 * Invalidate all CAM entries - bit 30 is undocumented
4154 rtl8xxxu_write32(priv, REG_CAM_CMD, CAM_CMD_POLLING | BIT(30));
4157 * Start out with default power levels for channel 6, 20MHz
4159 fops->set_tx_power(priv, 1, false);
4161 /* Let the 8051 take control of antenna setting */
4162 if (priv->rtl_chip != RTL8192E) {
4163 val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
4164 val8 |= LEDCFG2_DPDT_SELECT;
4165 rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
4168 rtl8xxxu_write8(priv, REG_HWSEQ_CTRL, 0xff);
4170 /* Disable BAR - not sure if this has any effect on USB */
4171 rtl8xxxu_write32(priv, REG_BAR_MODE_CTRL, 0x0201ffff);
4173 rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
4175 if (fops->init_statistics)
4176 fops->init_statistics(priv);
4178 if (priv->rtl_chip == RTL8192E) {
4180 * 0x4c6[3] 1: RTS BW = Data BW
4181 * 0: RTS BW depends on CCA / secondary CCA result.
4183 val8 = rtl8xxxu_read8(priv, REG_QUEUE_CTRL);
4184 val8 &= ~BIT(3);
4185 rtl8xxxu_write8(priv, REG_QUEUE_CTRL, val8);
4187 * Reset USB mode switch setting
4189 rtl8xxxu_write8(priv, REG_ACLK_MON, 0x00);
4192 rtl8723a_phy_lc_calibrate(priv);
4194 fops->phy_iq_calibrate(priv);
4197 * This should enable thermal meter
4199 if (fops->gen2_thermal_meter)
4200 rtl8xxxu_write_rfreg(priv,
4201 RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
4202 else
4203 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60);
4205 /* Set NAV_UPPER to 30000us */
4206 val8 = ((30000 + NAV_UPPER_UNIT - 1) / NAV_UPPER_UNIT);
4207 rtl8xxxu_write8(priv, REG_NAV_UPPER, val8);
4209 if (priv->rtl_chip == RTL8723A) {
4211 * 2011/03/09 MH debug only, UMC-B cut pass 2500 S5 test,
4212 * but we need to find root cause.
4213 * This is 8723au only.
4215 val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
4216 if ((val32 & 0xff000000) != 0x83000000) {
4217 val32 |= FPGA_RF_MODE_CCK;
4218 rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
4220 } else if (priv->rtl_chip == RTL8192E) {
4221 rtl8xxxu_write8(priv, REG_USB_HRPWM, 0x00);
4224 val32 = rtl8xxxu_read32(priv, REG_FWHW_TXQ_CTRL);
4225 val32 |= FWHW_TXQ_CTRL_XMIT_MGMT_ACK;
4226 /* ack for xmit mgmt frames. */
4227 rtl8xxxu_write32(priv, REG_FWHW_TXQ_CTRL, val32);
4229 if (priv->rtl_chip == RTL8192E) {
4231 * Fix LDPC rx hang issue.
4233 val32 = rtl8xxxu_read32(priv, REG_AFE_MISC);
4234 rtl8xxxu_write8(priv, REG_8192E_LDOV12_CTRL, 0x75);
4235 val32 &= 0xfff00fff;
4236 val32 |= 0x0007e000;
4237 rtl8xxxu_write32(priv, REG_AFE_MISC, val32);
4239 exit:
4240 return ret;
4243 static void rtl8xxxu_cam_write(struct rtl8xxxu_priv *priv,
4244 struct ieee80211_key_conf *key, const u8 *mac)
4246 u32 cmd, val32, addr, ctrl;
4247 int j, i, tmp_debug;
4249 tmp_debug = rtl8xxxu_debug;
4250 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_KEY)
4251 rtl8xxxu_debug |= RTL8XXXU_DEBUG_REG_WRITE;
4254 * This is a bit of a hack - the lower bits of the cipher
4255 * suite selector happens to match the cipher index in the CAM
4257 addr = key->keyidx << CAM_CMD_KEY_SHIFT;
4258 ctrl = (key->cipher & 0x0f) << 2 | key->keyidx | CAM_WRITE_VALID;
4260 for (j = 5; j >= 0; j--) {
4261 switch (j) {
4262 case 0:
4263 val32 = ctrl | (mac[0] << 16) | (mac[1] << 24);
4264 break;
4265 case 1:
4266 val32 = mac[2] | (mac[3] << 8) |
4267 (mac[4] << 16) | (mac[5] << 24);
4268 break;
4269 default:
4270 i = (j - 2) << 2;
4271 val32 = key->key[i] | (key->key[i + 1] << 8) |
4272 key->key[i + 2] << 16 | key->key[i + 3] << 24;
4273 break;
4276 rtl8xxxu_write32(priv, REG_CAM_WRITE, val32);
4277 cmd = CAM_CMD_POLLING | CAM_CMD_WRITE | (addr + j);
4278 rtl8xxxu_write32(priv, REG_CAM_CMD, cmd);
4279 udelay(100);
4282 rtl8xxxu_debug = tmp_debug;
4285 static void rtl8xxxu_sw_scan_start(struct ieee80211_hw *hw,
4286 struct ieee80211_vif *vif, const u8 *mac)
4288 struct rtl8xxxu_priv *priv = hw->priv;
4289 u8 val8;
4291 val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
4292 val8 |= BEACON_DISABLE_TSF_UPDATE;
4293 rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
4296 static void rtl8xxxu_sw_scan_complete(struct ieee80211_hw *hw,
4297 struct ieee80211_vif *vif)
4299 struct rtl8xxxu_priv *priv = hw->priv;
4300 u8 val8;
4302 val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
4303 val8 &= ~BEACON_DISABLE_TSF_UPDATE;
4304 rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
4307 void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv,
4308 u32 ramask, u8 rateid, int sgi)
4310 struct h2c_cmd h2c;
4312 memset(&h2c, 0, sizeof(struct h2c_cmd));
4314 h2c.ramask.cmd = H2C_SET_RATE_MASK;
4315 h2c.ramask.mask_lo = cpu_to_le16(ramask & 0xffff);
4316 h2c.ramask.mask_hi = cpu_to_le16(ramask >> 16);
4318 h2c.ramask.arg = 0x80;
4319 if (sgi)
4320 h2c.ramask.arg |= 0x20;
4322 dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n",
4323 __func__, ramask, h2c.ramask.arg, sizeof(h2c.ramask));
4324 rtl8xxxu_gen1_h2c_cmd(priv, &h2c, sizeof(h2c.ramask));
4327 void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv,
4328 u32 ramask, u8 rateid, int sgi)
4330 struct h2c_cmd h2c;
4331 u8 bw = RTL8XXXU_CHANNEL_WIDTH_20;
4333 memset(&h2c, 0, sizeof(struct h2c_cmd));
4335 h2c.b_macid_cfg.cmd = H2C_8723B_MACID_CFG_RAID;
4336 h2c.b_macid_cfg.ramask0 = ramask & 0xff;
4337 h2c.b_macid_cfg.ramask1 = (ramask >> 8) & 0xff;
4338 h2c.b_macid_cfg.ramask2 = (ramask >> 16) & 0xff;
4339 h2c.b_macid_cfg.ramask3 = (ramask >> 24) & 0xff;
4341 h2c.ramask.arg = 0x80;
4342 h2c.b_macid_cfg.data1 = rateid;
4343 if (sgi)
4344 h2c.b_macid_cfg.data1 |= BIT(7);
4346 h2c.b_macid_cfg.data2 = bw;
4348 dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n",
4349 __func__, ramask, h2c.ramask.arg, sizeof(h2c.b_macid_cfg));
4350 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.b_macid_cfg));
4353 void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv,
4354 u8 macid, bool connect)
4356 struct h2c_cmd h2c;
4358 memset(&h2c, 0, sizeof(struct h2c_cmd));
4360 h2c.joinbss.cmd = H2C_JOIN_BSS_REPORT;
4362 if (connect)
4363 h2c.joinbss.data = H2C_JOIN_BSS_CONNECT;
4364 else
4365 h2c.joinbss.data = H2C_JOIN_BSS_DISCONNECT;
4367 rtl8xxxu_gen1_h2c_cmd(priv, &h2c, sizeof(h2c.joinbss));
4370 void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
4371 u8 macid, bool connect)
4373 #ifdef RTL8XXXU_GEN2_REPORT_CONNECT
4375 * Barry Day reports this causes issues with 8192eu and 8723bu
4376 * devices reconnecting. The reason for this is unclear, but
4377 * until it is better understood, leave the code in place but
4378 * disabled, so it is not lost.
4380 struct h2c_cmd h2c;
4382 memset(&h2c, 0, sizeof(struct h2c_cmd));
4384 h2c.media_status_rpt.cmd = H2C_8723B_MEDIA_STATUS_RPT;
4385 if (connect)
4386 h2c.media_status_rpt.parm |= BIT(0);
4387 else
4388 h2c.media_status_rpt.parm &= ~BIT(0);
4390 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt));
4391 #endif
4394 void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
4396 u8 agg_ctrl, usb_spec, page_thresh, timeout;
4398 usb_spec = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
4399 usb_spec &= ~USB_SPEC_USB_AGG_ENABLE;
4400 rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, usb_spec);
4402 agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
4403 agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
4405 if (!rtl8xxxu_dma_aggregation) {
4406 rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
4407 return;
4410 agg_ctrl |= TRXDMA_CTRL_RXDMA_AGG_EN;
4411 rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
4414 * The number of packets we can take looks to be buffer size / 512
4415 * which matches the 512 byte rounding we have to do when de-muxing
4416 * the packets.
4418 * Sample numbers from the vendor driver:
4419 * USB High-Speed mode values:
4420 * RxAggBlockCount = 8 : 512 byte unit
4421 * RxAggBlockTimeout = 6
4422 * RxAggPageCount = 48 : 128 byte unit
4423 * RxAggPageTimeout = 4 or 6 (absolute time 34ms/(2^6))
4426 page_thresh = (priv->fops->rx_agg_buf_size / 512);
4427 if (rtl8xxxu_dma_agg_pages >= 0) {
4428 if (rtl8xxxu_dma_agg_pages <= page_thresh)
4429 timeout = page_thresh;
4430 else if (rtl8xxxu_dma_agg_pages <= 6)
4431 dev_err(&priv->udev->dev,
4432 "%s: dma_agg_pages=%i too small, minimum is 6\n",
4433 __func__, rtl8xxxu_dma_agg_pages);
4434 else
4435 dev_err(&priv->udev->dev,
4436 "%s: dma_agg_pages=%i larger than limit %i\n",
4437 __func__, rtl8xxxu_dma_agg_pages, page_thresh);
4439 rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH, page_thresh);
4441 * REG_RXDMA_AGG_PG_TH + 1 seems to be the timeout register on
4442 * gen2 chips and rtl8188eu. The rtl8723au seems unhappy if we
4443 * don't set it, so better set both.
4445 timeout = 4;
4447 if (rtl8xxxu_dma_agg_timeout >= 0) {
4448 if (rtl8xxxu_dma_agg_timeout <= 127)
4449 timeout = rtl8xxxu_dma_agg_timeout;
4450 else
4451 dev_err(&priv->udev->dev,
4452 "%s: Invalid dma_agg_timeout: %i\n",
4453 __func__, rtl8xxxu_dma_agg_timeout);
4456 rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH + 1, timeout);
4457 rtl8xxxu_write8(priv, REG_USB_DMA_AGG_TO, timeout);
4458 priv->rx_buf_aggregation = 1;
4461 static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg)
4463 u32 val32;
4464 u8 rate_idx = 0;
4466 rate_cfg &= RESPONSE_RATE_BITMAP_ALL;
4468 val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
4469 val32 &= ~RESPONSE_RATE_BITMAP_ALL;
4470 val32 |= rate_cfg;
4471 rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
4473 dev_dbg(&priv->udev->dev, "%s: rates %08x\n", __func__, rate_cfg);
4475 while (rate_cfg) {
4476 rate_cfg = (rate_cfg >> 1);
4477 rate_idx++;
4479 rtl8xxxu_write8(priv, REG_INIRTS_RATE_SEL, rate_idx);
4482 static u16
4483 rtl8xxxu_wireless_mode(struct ieee80211_hw *hw, struct ieee80211_sta *sta)
4485 u16 network_type = WIRELESS_MODE_UNKNOWN;
4487 if (hw->conf.chandef.chan->band == NL80211_BAND_5GHZ) {
4488 if (sta->vht_cap.vht_supported)
4489 network_type = WIRELESS_MODE_AC;
4490 else if (sta->ht_cap.ht_supported)
4491 network_type = WIRELESS_MODE_N_5G;
4493 network_type |= WIRELESS_MODE_A;
4494 } else {
4495 if (sta->vht_cap.vht_supported)
4496 network_type = WIRELESS_MODE_AC;
4497 else if (sta->ht_cap.ht_supported)
4498 network_type = WIRELESS_MODE_N_24G;
4500 if (sta->supp_rates[0] <= 0xf)
4501 network_type |= WIRELESS_MODE_B;
4502 else if (sta->supp_rates[0] & 0xf)
4503 network_type |= (WIRELESS_MODE_B | WIRELESS_MODE_G);
4504 else
4505 network_type |= WIRELESS_MODE_G;
4508 return network_type;
4511 static void
4512 rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
4513 struct ieee80211_bss_conf *bss_conf, u32 changed)
4515 struct rtl8xxxu_priv *priv = hw->priv;
4516 struct device *dev = &priv->udev->dev;
4517 struct ieee80211_sta *sta;
4518 u32 val32;
4519 u8 val8;
4521 if (changed & BSS_CHANGED_ASSOC) {
4522 dev_dbg(dev, "Changed ASSOC: %i!\n", bss_conf->assoc);
4524 rtl8xxxu_set_linktype(priv, vif->type);
4526 if (bss_conf->assoc) {
4527 u32 ramask;
4528 int sgi = 0;
4530 rcu_read_lock();
4531 sta = ieee80211_find_sta(vif, bss_conf->bssid);
4532 if (!sta) {
4533 dev_info(dev, "%s: ASSOC no sta found\n",
4534 __func__);
4535 rcu_read_unlock();
4536 goto error;
4539 if (sta->ht_cap.ht_supported)
4540 dev_info(dev, "%s: HT supported\n", __func__);
4541 if (sta->vht_cap.vht_supported)
4542 dev_info(dev, "%s: VHT supported\n", __func__);
4544 /* TODO: Set bits 28-31 for rate adaptive id */
4545 ramask = (sta->supp_rates[0] & 0xfff) |
4546 sta->ht_cap.mcs.rx_mask[0] << 12 |
4547 sta->ht_cap.mcs.rx_mask[1] << 20;
4548 if (sta->ht_cap.cap &
4549 (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))
4550 sgi = 1;
4551 rcu_read_unlock();
4553 priv->vif = vif;
4554 priv->rssi_level = RTL8XXXU_RATR_STA_INIT;
4556 priv->fops->update_rate_mask(priv, ramask, 0, sgi);
4558 rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff);
4560 rtl8xxxu_stop_tx_beacon(priv);
4562 /* joinbss sequence */
4563 rtl8xxxu_write16(priv, REG_BCN_PSR_RPT,
4564 0xc000 | bss_conf->aid);
4566 priv->fops->report_connect(priv, 0, true);
4567 } else {
4568 val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
4569 val8 |= BEACON_DISABLE_TSF_UPDATE;
4570 rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
4572 priv->fops->report_connect(priv, 0, false);
4576 if (changed & BSS_CHANGED_ERP_PREAMBLE) {
4577 dev_dbg(dev, "Changed ERP_PREAMBLE: Use short preamble %i\n",
4578 bss_conf->use_short_preamble);
4579 val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
4580 if (bss_conf->use_short_preamble)
4581 val32 |= RSR_ACK_SHORT_PREAMBLE;
4582 else
4583 val32 &= ~RSR_ACK_SHORT_PREAMBLE;
4584 rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
4587 if (changed & BSS_CHANGED_ERP_SLOT) {
4588 dev_dbg(dev, "Changed ERP_SLOT: short_slot_time %i\n",
4589 bss_conf->use_short_slot);
4591 if (bss_conf->use_short_slot)
4592 val8 = 9;
4593 else
4594 val8 = 20;
4595 rtl8xxxu_write8(priv, REG_SLOT, val8);
4598 if (changed & BSS_CHANGED_BSSID) {
4599 dev_dbg(dev, "Changed BSSID!\n");
4600 rtl8xxxu_set_bssid(priv, bss_conf->bssid);
4603 if (changed & BSS_CHANGED_BASIC_RATES) {
4604 dev_dbg(dev, "Changed BASIC_RATES!\n");
4605 rtl8xxxu_set_basic_rates(priv, bss_conf->basic_rates);
4607 error:
4608 return;
4611 static u32 rtl8xxxu_80211_to_rtl_queue(u32 queue)
4613 u32 rtlqueue;
4615 switch (queue) {
4616 case IEEE80211_AC_VO:
4617 rtlqueue = TXDESC_QUEUE_VO;
4618 break;
4619 case IEEE80211_AC_VI:
4620 rtlqueue = TXDESC_QUEUE_VI;
4621 break;
4622 case IEEE80211_AC_BE:
4623 rtlqueue = TXDESC_QUEUE_BE;
4624 break;
4625 case IEEE80211_AC_BK:
4626 rtlqueue = TXDESC_QUEUE_BK;
4627 break;
4628 default:
4629 rtlqueue = TXDESC_QUEUE_BE;
4632 return rtlqueue;
4635 static u32 rtl8xxxu_queue_select(struct ieee80211_hw *hw, struct sk_buff *skb)
4637 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
4638 u32 queue;
4640 if (ieee80211_is_mgmt(hdr->frame_control))
4641 queue = TXDESC_QUEUE_MGNT;
4642 else
4643 queue = rtl8xxxu_80211_to_rtl_queue(skb_get_queue_mapping(skb));
4645 return queue;
4649 * Despite newer chips 8723b/8812/8821 having a larger TX descriptor
4650 * format. The descriptor checksum is still only calculated over the
4651 * initial 32 bytes of the descriptor!
4653 static void rtl8xxxu_calc_tx_desc_csum(struct rtl8xxxu_txdesc32 *tx_desc)
4655 __le16 *ptr = (__le16 *)tx_desc;
4656 u16 csum = 0;
4657 int i;
4660 * Clear csum field before calculation, as the csum field is
4661 * in the middle of the struct.
4663 tx_desc->csum = cpu_to_le16(0);
4665 for (i = 0; i < (sizeof(struct rtl8xxxu_txdesc32) / sizeof(u16)); i++)
4666 csum = csum ^ le16_to_cpu(ptr[i]);
4668 tx_desc->csum |= cpu_to_le16(csum);
4671 static void rtl8xxxu_free_tx_resources(struct rtl8xxxu_priv *priv)
4673 struct rtl8xxxu_tx_urb *tx_urb, *tmp;
4674 unsigned long flags;
4676 spin_lock_irqsave(&priv->tx_urb_lock, flags);
4677 list_for_each_entry_safe(tx_urb, tmp, &priv->tx_urb_free_list, list) {
4678 list_del(&tx_urb->list);
4679 priv->tx_urb_free_count--;
4680 usb_free_urb(&tx_urb->urb);
4682 spin_unlock_irqrestore(&priv->tx_urb_lock, flags);
4685 static struct rtl8xxxu_tx_urb *
4686 rtl8xxxu_alloc_tx_urb(struct rtl8xxxu_priv *priv)
4688 struct rtl8xxxu_tx_urb *tx_urb;
4689 unsigned long flags;
4691 spin_lock_irqsave(&priv->tx_urb_lock, flags);
4692 tx_urb = list_first_entry_or_null(&priv->tx_urb_free_list,
4693 struct rtl8xxxu_tx_urb, list);
4694 if (tx_urb) {
4695 list_del(&tx_urb->list);
4696 priv->tx_urb_free_count--;
4697 if (priv->tx_urb_free_count < RTL8XXXU_TX_URB_LOW_WATER &&
4698 !priv->tx_stopped) {
4699 priv->tx_stopped = true;
4700 ieee80211_stop_queues(priv->hw);
4704 spin_unlock_irqrestore(&priv->tx_urb_lock, flags);
4706 return tx_urb;
4709 static void rtl8xxxu_free_tx_urb(struct rtl8xxxu_priv *priv,
4710 struct rtl8xxxu_tx_urb *tx_urb)
4712 unsigned long flags;
4714 INIT_LIST_HEAD(&tx_urb->list);
4716 spin_lock_irqsave(&priv->tx_urb_lock, flags);
4718 list_add(&tx_urb->list, &priv->tx_urb_free_list);
4719 priv->tx_urb_free_count++;
4720 if (priv->tx_urb_free_count > RTL8XXXU_TX_URB_HIGH_WATER &&
4721 priv->tx_stopped) {
4722 priv->tx_stopped = false;
4723 ieee80211_wake_queues(priv->hw);
4726 spin_unlock_irqrestore(&priv->tx_urb_lock, flags);
4729 static void rtl8xxxu_tx_complete(struct urb *urb)
4731 struct sk_buff *skb = (struct sk_buff *)urb->context;
4732 struct ieee80211_tx_info *tx_info;
4733 struct ieee80211_hw *hw;
4734 struct rtl8xxxu_priv *priv;
4735 struct rtl8xxxu_tx_urb *tx_urb =
4736 container_of(urb, struct rtl8xxxu_tx_urb, urb);
4738 tx_info = IEEE80211_SKB_CB(skb);
4739 hw = tx_info->rate_driver_data[0];
4740 priv = hw->priv;
4742 skb_pull(skb, priv->fops->tx_desc_size);
4744 ieee80211_tx_info_clear_status(tx_info);
4745 tx_info->status.rates[0].idx = -1;
4746 tx_info->status.rates[0].count = 0;
4748 if (!urb->status)
4749 tx_info->flags |= IEEE80211_TX_STAT_ACK;
4751 ieee80211_tx_status_irqsafe(hw, skb);
4753 rtl8xxxu_free_tx_urb(priv, tx_urb);
4756 static void rtl8xxxu_dump_action(struct device *dev,
4757 struct ieee80211_hdr *hdr)
4759 struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)hdr;
4760 u16 cap, timeout;
4762 if (!(rtl8xxxu_debug & RTL8XXXU_DEBUG_ACTION))
4763 return;
4765 switch (mgmt->u.action.u.addba_resp.action_code) {
4766 case WLAN_ACTION_ADDBA_RESP:
4767 cap = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
4768 timeout = le16_to_cpu(mgmt->u.action.u.addba_resp.timeout);
4769 dev_info(dev, "WLAN_ACTION_ADDBA_RESP: "
4770 "timeout %i, tid %02x, buf_size %02x, policy %02x, "
4771 "status %02x\n",
4772 timeout,
4773 (cap & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2,
4774 (cap & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6,
4775 (cap >> 1) & 0x1,
4776 le16_to_cpu(mgmt->u.action.u.addba_resp.status));
4777 break;
4778 case WLAN_ACTION_ADDBA_REQ:
4779 cap = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
4780 timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout);
4781 dev_info(dev, "WLAN_ACTION_ADDBA_REQ: "
4782 "timeout %i, tid %02x, buf_size %02x, policy %02x\n",
4783 timeout,
4784 (cap & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2,
4785 (cap & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6,
4786 (cap >> 1) & 0x1);
4787 break;
4788 default:
4789 dev_info(dev, "action frame %02x\n",
4790 mgmt->u.action.u.addba_resp.action_code);
4791 break;
4796 * Fill in v1 (gen1) specific TX descriptor bits.
4797 * This format is used on 8188cu/8192cu/8723au
4799 void
4800 rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
4801 struct ieee80211_tx_info *tx_info,
4802 struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
4803 bool short_preamble, bool ampdu_enable, u32 rts_rate)
4805 struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
4806 struct rtl8xxxu_priv *priv = hw->priv;
4807 struct device *dev = &priv->udev->dev;
4808 u32 rate;
4809 u16 rate_flags = tx_info->control.rates[0].flags;
4810 u16 seq_number;
4812 if (rate_flags & IEEE80211_TX_RC_MCS &&
4813 !ieee80211_is_mgmt(hdr->frame_control))
4814 rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
4815 else
4816 rate = tx_rate->hw_value;
4818 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
4819 dev_info(dev, "%s: TX rate: %d, pkt size %u\n",
4820 __func__, rate, le16_to_cpu(tx_desc->pkt_size));
4822 seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
4824 tx_desc->txdw5 = cpu_to_le32(rate);
4826 if (ieee80211_is_data(hdr->frame_control))
4827 tx_desc->txdw5 |= cpu_to_le32(0x0001ff00);
4829 tx_desc->txdw3 = cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
4831 if (ampdu_enable)
4832 tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
4833 else
4834 tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
4836 if (ieee80211_is_mgmt(hdr->frame_control)) {
4837 tx_desc->txdw5 = cpu_to_le32(rate);
4838 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
4839 tx_desc->txdw5 |= cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT);
4840 tx_desc->txdw5 |= cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE);
4843 if (ieee80211_is_data_qos(hdr->frame_control))
4844 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS);
4846 if (short_preamble)
4847 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
4849 if (sgi)
4850 tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
4853 * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
4855 tx_desc->txdw4 |= cpu_to_le32(rts_rate << TXDESC32_RTS_RATE_SHIFT);
4856 if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
4857 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
4858 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
4859 } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
4860 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_CTS_SELF_ENABLE);
4861 tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
4866 * Fill in v2 (gen2) specific TX descriptor bits.
4867 * This format is used on 8192eu/8723bu
4869 void
4870 rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
4871 struct ieee80211_tx_info *tx_info,
4872 struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
4873 bool short_preamble, bool ampdu_enable, u32 rts_rate)
4875 struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
4876 struct rtl8xxxu_priv *priv = hw->priv;
4877 struct device *dev = &priv->udev->dev;
4878 struct rtl8xxxu_txdesc40 *tx_desc40;
4879 u32 rate;
4880 u16 rate_flags = tx_info->control.rates[0].flags;
4881 u16 seq_number;
4883 tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc32;
4885 if (rate_flags & IEEE80211_TX_RC_MCS &&
4886 !ieee80211_is_mgmt(hdr->frame_control))
4887 rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
4888 else
4889 rate = tx_rate->hw_value;
4891 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
4892 dev_info(dev, "%s: TX rate: %d, pkt size %u\n",
4893 __func__, rate, le16_to_cpu(tx_desc40->pkt_size));
4895 seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
4897 tx_desc40->txdw4 = cpu_to_le32(rate);
4898 if (ieee80211_is_data(hdr->frame_control)) {
4899 tx_desc40->txdw4 |= cpu_to_le32(0x1f <<
4900 TXDESC40_DATA_RATE_FB_SHIFT);
4903 tx_desc40->txdw9 = cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);
4905 if (ampdu_enable)
4906 tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
4907 else
4908 tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
4910 if (ieee80211_is_mgmt(hdr->frame_control)) {
4911 tx_desc40->txdw4 = cpu_to_le32(rate);
4912 tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_USE_DRIVER_RATE);
4913 tx_desc40->txdw4 |=
4914 cpu_to_le32(6 << TXDESC40_RETRY_LIMIT_SHIFT);
4915 tx_desc40->txdw4 |= cpu_to_le32(TXDESC40_RETRY_LIMIT_ENABLE);
4918 if (short_preamble)
4919 tx_desc40->txdw5 |= cpu_to_le32(TXDESC40_SHORT_PREAMBLE);
4921 tx_desc40->txdw4 |= cpu_to_le32(rts_rate << TXDESC40_RTS_RATE_SHIFT);
4923 * rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
4925 if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
4926 tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
4927 tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
4928 } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
4930 * For some reason the vendor driver doesn't set
4931 * TXDESC40_HW_RTS_ENABLE for CTS to SELF
4933 tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_CTS_SELF_ENABLE);
4937 static void rtl8xxxu_tx(struct ieee80211_hw *hw,
4938 struct ieee80211_tx_control *control,
4939 struct sk_buff *skb)
4941 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
4942 struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
4943 struct rtl8xxxu_priv *priv = hw->priv;
4944 struct rtl8xxxu_txdesc32 *tx_desc;
4945 struct rtl8xxxu_tx_urb *tx_urb;
4946 struct ieee80211_sta *sta = NULL;
4947 struct ieee80211_vif *vif = tx_info->control.vif;
4948 struct device *dev = &priv->udev->dev;
4949 u32 queue, rts_rate;
4950 u16 pktlen = skb->len;
4951 u16 rate_flag = tx_info->control.rates[0].flags;
4952 int tx_desc_size = priv->fops->tx_desc_size;
4953 int ret;
4954 bool ampdu_enable, sgi = false, short_preamble = false;
4956 if (skb_headroom(skb) < tx_desc_size) {
4957 dev_warn(dev,
4958 "%s: Not enough headroom (%i) for tx descriptor\n",
4959 __func__, skb_headroom(skb));
4960 goto error;
4963 if (unlikely(skb->len > (65535 - tx_desc_size))) {
4964 dev_warn(dev, "%s: Trying to send over-sized skb (%i)\n",
4965 __func__, skb->len);
4966 goto error;
4969 tx_urb = rtl8xxxu_alloc_tx_urb(priv);
4970 if (!tx_urb) {
4971 dev_warn(dev, "%s: Unable to allocate tx urb\n", __func__);
4972 goto error;
4975 if (ieee80211_is_action(hdr->frame_control))
4976 rtl8xxxu_dump_action(dev, hdr);
4978 tx_info->rate_driver_data[0] = hw;
4980 if (control && control->sta)
4981 sta = control->sta;
4983 tx_desc = skb_push(skb, tx_desc_size);
4985 memset(tx_desc, 0, tx_desc_size);
4986 tx_desc->pkt_size = cpu_to_le16(pktlen);
4987 tx_desc->pkt_offset = tx_desc_size;
4989 tx_desc->txdw0 =
4990 TXDESC_OWN | TXDESC_FIRST_SEGMENT | TXDESC_LAST_SEGMENT;
4991 if (is_multicast_ether_addr(ieee80211_get_DA(hdr)) ||
4992 is_broadcast_ether_addr(ieee80211_get_DA(hdr)))
4993 tx_desc->txdw0 |= TXDESC_BROADMULTICAST;
4995 queue = rtl8xxxu_queue_select(hw, skb);
4996 tx_desc->txdw1 = cpu_to_le32(queue << TXDESC_QUEUE_SHIFT);
4998 if (tx_info->control.hw_key) {
4999 switch (tx_info->control.hw_key->cipher) {
5000 case WLAN_CIPHER_SUITE_WEP40:
5001 case WLAN_CIPHER_SUITE_WEP104:
5002 case WLAN_CIPHER_SUITE_TKIP:
5003 tx_desc->txdw1 |= cpu_to_le32(TXDESC_SEC_RC4);
5004 break;
5005 case WLAN_CIPHER_SUITE_CCMP:
5006 tx_desc->txdw1 |= cpu_to_le32(TXDESC_SEC_AES);
5007 break;
5008 default:
5009 break;
5013 /* (tx_info->flags & IEEE80211_TX_CTL_AMPDU) && */
5014 ampdu_enable = false;
5015 if (ieee80211_is_data_qos(hdr->frame_control) && sta) {
5016 if (sta->ht_cap.ht_supported) {
5017 u32 ampdu, val32;
5019 ampdu = (u32)sta->ht_cap.ampdu_density;
5020 val32 = ampdu << TXDESC_AMPDU_DENSITY_SHIFT;
5021 tx_desc->txdw2 |= cpu_to_le32(val32);
5023 ampdu_enable = true;
5027 if (rate_flag & IEEE80211_TX_RC_SHORT_GI ||
5028 (ieee80211_is_data_qos(hdr->frame_control) &&
5029 sta && sta->ht_cap.cap &
5030 (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20)))
5031 sgi = true;
5033 if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE ||
5034 (sta && vif && vif->bss_conf.use_short_preamble))
5035 short_preamble = true;
5037 if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS)
5038 rts_rate = ieee80211_get_rts_cts_rate(hw, tx_info)->hw_value;
5039 else if (rate_flag & IEEE80211_TX_RC_USE_CTS_PROTECT)
5040 rts_rate = ieee80211_get_rts_cts_rate(hw, tx_info)->hw_value;
5041 else
5042 rts_rate = 0;
5045 priv->fops->fill_txdesc(hw, hdr, tx_info, tx_desc, sgi, short_preamble,
5046 ampdu_enable, rts_rate);
5048 rtl8xxxu_calc_tx_desc_csum(tx_desc);
5050 usb_fill_bulk_urb(&tx_urb->urb, priv->udev, priv->pipe_out[queue],
5051 skb->data, skb->len, rtl8xxxu_tx_complete, skb);
5053 usb_anchor_urb(&tx_urb->urb, &priv->tx_anchor);
5054 ret = usb_submit_urb(&tx_urb->urb, GFP_ATOMIC);
5055 if (ret) {
5056 usb_unanchor_urb(&tx_urb->urb);
5057 rtl8xxxu_free_tx_urb(priv, tx_urb);
5058 goto error;
5060 return;
5061 error:
5062 dev_kfree_skb(skb);
5065 static void rtl8xxxu_rx_parse_phystats(struct rtl8xxxu_priv *priv,
5066 struct ieee80211_rx_status *rx_status,
5067 struct rtl8723au_phy_stats *phy_stats,
5068 u32 rxmcs)
5070 if (phy_stats->sgi_en)
5071 rx_status->enc_flags |= RX_ENC_FLAG_SHORT_GI;
5073 if (rxmcs < DESC_RATE_6M) {
5075 * Handle PHY stats for CCK rates
5077 u8 cck_agc_rpt = phy_stats->cck_agc_rpt_ofdm_cfosho_a;
5079 switch (cck_agc_rpt & 0xc0) {
5080 case 0xc0:
5081 rx_status->signal = -46 - (cck_agc_rpt & 0x3e);
5082 break;
5083 case 0x80:
5084 rx_status->signal = -26 - (cck_agc_rpt & 0x3e);
5085 break;
5086 case 0x40:
5087 rx_status->signal = -12 - (cck_agc_rpt & 0x3e);
5088 break;
5089 case 0x00:
5090 rx_status->signal = 16 - (cck_agc_rpt & 0x3e);
5091 break;
5093 } else {
5094 rx_status->signal =
5095 (phy_stats->cck_sig_qual_ofdm_pwdb_all >> 1) - 110;
5099 static void rtl8xxxu_free_rx_resources(struct rtl8xxxu_priv *priv)
5101 struct rtl8xxxu_rx_urb *rx_urb, *tmp;
5102 unsigned long flags;
5104 spin_lock_irqsave(&priv->rx_urb_lock, flags);
5106 list_for_each_entry_safe(rx_urb, tmp,
5107 &priv->rx_urb_pending_list, list) {
5108 list_del(&rx_urb->list);
5109 priv->rx_urb_pending_count--;
5110 usb_free_urb(&rx_urb->urb);
5113 spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
5116 static void rtl8xxxu_queue_rx_urb(struct rtl8xxxu_priv *priv,
5117 struct rtl8xxxu_rx_urb *rx_urb)
5119 struct sk_buff *skb;
5120 unsigned long flags;
5121 int pending = 0;
5123 spin_lock_irqsave(&priv->rx_urb_lock, flags);
5125 if (!priv->shutdown) {
5126 list_add_tail(&rx_urb->list, &priv->rx_urb_pending_list);
5127 priv->rx_urb_pending_count++;
5128 pending = priv->rx_urb_pending_count;
5129 } else {
5130 skb = (struct sk_buff *)rx_urb->urb.context;
5131 dev_kfree_skb(skb);
5132 usb_free_urb(&rx_urb->urb);
5135 spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
5137 if (pending > RTL8XXXU_RX_URB_PENDING_WATER)
5138 schedule_work(&priv->rx_urb_wq);
5141 static void rtl8xxxu_rx_urb_work(struct work_struct *work)
5143 struct rtl8xxxu_priv *priv;
5144 struct rtl8xxxu_rx_urb *rx_urb, *tmp;
5145 struct list_head local;
5146 struct sk_buff *skb;
5147 unsigned long flags;
5148 int ret;
5150 priv = container_of(work, struct rtl8xxxu_priv, rx_urb_wq);
5151 INIT_LIST_HEAD(&local);
5153 spin_lock_irqsave(&priv->rx_urb_lock, flags);
5155 list_splice_init(&priv->rx_urb_pending_list, &local);
5156 priv->rx_urb_pending_count = 0;
5158 spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
5160 list_for_each_entry_safe(rx_urb, tmp, &local, list) {
5161 list_del_init(&rx_urb->list);
5162 ret = rtl8xxxu_submit_rx_urb(priv, rx_urb);
5164 * If out of memory or temporary error, put it back on the
5165 * queue and try again. Otherwise the device is dead/gone
5166 * and we should drop it.
5168 switch (ret) {
5169 case 0:
5170 break;
5171 case -ENOMEM:
5172 case -EAGAIN:
5173 rtl8xxxu_queue_rx_urb(priv, rx_urb);
5174 break;
5175 default:
5176 pr_info("failed to requeue urb %i\n", ret);
5177 skb = (struct sk_buff *)rx_urb->urb.context;
5178 dev_kfree_skb(skb);
5179 usb_free_urb(&rx_urb->urb);
5185 * The RTL8723BU/RTL8192EU vendor driver use coexistence table type
5186 * 0-7 to represent writing different combinations of register values
5187 * to REG_BT_COEX_TABLEs. It's for different kinds of coexistence use
5188 * cases which Realtek doesn't provide detail for these settings. Keep
5189 * this aligned with vendor driver for easier maintenance.
5191 static
5192 void rtl8723bu_set_coex_with_type(struct rtl8xxxu_priv *priv, u8 type)
5194 switch (type) {
5195 case 0:
5196 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555);
5197 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555);
5198 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
5199 rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
5200 break;
5201 case 1:
5202 case 3:
5203 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555);
5204 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x5a5a5a5a);
5205 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
5206 rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
5207 break;
5208 case 2:
5209 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x5a5a5a5a);
5210 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x5a5a5a5a);
5211 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
5212 rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
5213 break;
5214 case 4:
5215 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x5a5a5a5a);
5216 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0xaaaa5a5a);
5217 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
5218 rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
5219 break;
5220 case 5:
5221 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x5a5a5a5a);
5222 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0xaa5a5a5a);
5223 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
5224 rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
5225 break;
5226 case 6:
5227 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555);
5228 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0xaaaaaaaa);
5229 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
5230 rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
5231 break;
5232 case 7:
5233 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0xaaaaaaaa);
5234 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0xaaaaaaaa);
5235 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
5236 rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
5237 break;
5238 default:
5239 break;
5243 static
5244 void rtl8723bu_update_bt_link_info(struct rtl8xxxu_priv *priv, u8 bt_info)
5246 struct rtl8xxxu_btcoex *btcoex = &priv->bt_coex;
5248 if (bt_info & BT_INFO_8723B_1ANT_B_INQ_PAGE)
5249 btcoex->c2h_bt_inquiry = true;
5250 else
5251 btcoex->c2h_bt_inquiry = false;
5253 if (!(bt_info & BT_INFO_8723B_1ANT_B_CONNECTION)) {
5254 btcoex->bt_status = BT_8723B_1ANT_STATUS_NON_CONNECTED_IDLE;
5255 btcoex->has_sco = false;
5256 btcoex->has_hid = false;
5257 btcoex->has_pan = false;
5258 btcoex->has_a2dp = false;
5259 } else {
5260 if ((bt_info & 0x1f) == BT_INFO_8723B_1ANT_B_CONNECTION)
5261 btcoex->bt_status = BT_8723B_1ANT_STATUS_CONNECTED_IDLE;
5262 else if ((bt_info & BT_INFO_8723B_1ANT_B_SCO_ESCO) ||
5263 (bt_info & BT_INFO_8723B_1ANT_B_SCO_BUSY))
5264 btcoex->bt_status = BT_8723B_1ANT_STATUS_SCO_BUSY;
5265 else if (bt_info & BT_INFO_8723B_1ANT_B_ACL_BUSY)
5266 btcoex->bt_status = BT_8723B_1ANT_STATUS_ACL_BUSY;
5267 else
5268 btcoex->bt_status = BT_8723B_1ANT_STATUS_MAX;
5270 if (bt_info & BT_INFO_8723B_1ANT_B_FTP)
5271 btcoex->has_pan = true;
5272 else
5273 btcoex->has_pan = false;
5275 if (bt_info & BT_INFO_8723B_1ANT_B_A2DP)
5276 btcoex->has_a2dp = true;
5277 else
5278 btcoex->has_a2dp = false;
5280 if (bt_info & BT_INFO_8723B_1ANT_B_HID)
5281 btcoex->has_hid = true;
5282 else
5283 btcoex->has_hid = false;
5285 if (bt_info & BT_INFO_8723B_1ANT_B_SCO_ESCO)
5286 btcoex->has_sco = true;
5287 else
5288 btcoex->has_sco = false;
5291 if (!btcoex->has_a2dp && !btcoex->has_sco &&
5292 !btcoex->has_pan && btcoex->has_hid)
5293 btcoex->hid_only = true;
5294 else
5295 btcoex->hid_only = false;
5297 if (!btcoex->has_sco && !btcoex->has_pan &&
5298 !btcoex->has_hid && btcoex->has_a2dp)
5299 btcoex->has_a2dp = true;
5300 else
5301 btcoex->has_a2dp = false;
5303 if (btcoex->bt_status == BT_8723B_1ANT_STATUS_SCO_BUSY ||
5304 btcoex->bt_status == BT_8723B_1ANT_STATUS_ACL_BUSY)
5305 btcoex->bt_busy = true;
5306 else
5307 btcoex->bt_busy = false;
5310 static
5311 void rtl8723bu_handle_bt_inquiry(struct rtl8xxxu_priv *priv)
5313 struct ieee80211_vif *vif;
5314 struct rtl8xxxu_btcoex *btcoex;
5315 bool wifi_connected;
5317 vif = priv->vif;
5318 btcoex = &priv->bt_coex;
5319 wifi_connected = (vif && vif->bss_conf.assoc);
5321 if (!wifi_connected) {
5322 rtl8723bu_set_ps_tdma(priv, 0x8, 0x0, 0x0, 0x0, 0x0);
5323 rtl8723bu_set_coex_with_type(priv, 0);
5324 } else if (btcoex->has_sco || btcoex->has_hid || btcoex->has_a2dp) {
5325 rtl8723bu_set_ps_tdma(priv, 0x61, 0x35, 0x3, 0x11, 0x11);
5326 rtl8723bu_set_coex_with_type(priv, 4);
5327 } else if (btcoex->has_pan) {
5328 rtl8723bu_set_ps_tdma(priv, 0x61, 0x3f, 0x3, 0x11, 0x11);
5329 rtl8723bu_set_coex_with_type(priv, 4);
5330 } else {
5331 rtl8723bu_set_ps_tdma(priv, 0x8, 0x0, 0x0, 0x0, 0x0);
5332 rtl8723bu_set_coex_with_type(priv, 7);
5336 static
5337 void rtl8723bu_handle_bt_info(struct rtl8xxxu_priv *priv)
5339 struct ieee80211_vif *vif;
5340 struct rtl8xxxu_btcoex *btcoex;
5341 bool wifi_connected;
5343 vif = priv->vif;
5344 btcoex = &priv->bt_coex;
5345 wifi_connected = (vif && vif->bss_conf.assoc);
5347 if (wifi_connected) {
5348 u32 val32 = 0;
5349 u32 high_prio_tx = 0, high_prio_rx = 0;
5351 val32 = rtl8xxxu_read32(priv, 0x770);
5352 high_prio_tx = val32 & 0x0000ffff;
5353 high_prio_rx = (val32 & 0xffff0000) >> 16;
5355 if (btcoex->bt_busy) {
5356 if (btcoex->hid_only) {
5357 rtl8723bu_set_ps_tdma(priv, 0x61, 0x20,
5358 0x3, 0x11, 0x11);
5359 rtl8723bu_set_coex_with_type(priv, 5);
5360 } else if (btcoex->a2dp_only) {
5361 rtl8723bu_set_ps_tdma(priv, 0x61, 0x35,
5362 0x3, 0x11, 0x11);
5363 rtl8723bu_set_coex_with_type(priv, 4);
5364 } else if ((btcoex->has_a2dp && btcoex->has_pan) ||
5365 (btcoex->has_hid && btcoex->has_a2dp &&
5366 btcoex->has_pan)) {
5367 rtl8723bu_set_ps_tdma(priv, 0x51, 0x21,
5368 0x3, 0x10, 0x10);
5369 rtl8723bu_set_coex_with_type(priv, 4);
5370 } else if (btcoex->has_hid && btcoex->has_a2dp) {
5371 rtl8723bu_set_ps_tdma(priv, 0x51, 0x21,
5372 0x3, 0x10, 0x10);
5373 rtl8723bu_set_coex_with_type(priv, 3);
5374 } else {
5375 rtl8723bu_set_ps_tdma(priv, 0x61, 0x35,
5376 0x3, 0x11, 0x11);
5377 rtl8723bu_set_coex_with_type(priv, 4);
5379 } else {
5380 rtl8723bu_set_ps_tdma(priv, 0x8, 0x0, 0x0, 0x0, 0x0);
5381 if (high_prio_tx + high_prio_rx <= 60)
5382 rtl8723bu_set_coex_with_type(priv, 2);
5383 else
5384 rtl8723bu_set_coex_with_type(priv, 7);
5386 } else {
5387 rtl8723bu_set_ps_tdma(priv, 0x8, 0x0, 0x0, 0x0, 0x0);
5388 rtl8723bu_set_coex_with_type(priv, 0);
5392 static struct ieee80211_rate rtl8xxxu_legacy_ratetable[] = {
5393 {.bitrate = 10, .hw_value = 0x00,},
5394 {.bitrate = 20, .hw_value = 0x01,},
5395 {.bitrate = 55, .hw_value = 0x02,},
5396 {.bitrate = 110, .hw_value = 0x03,},
5397 {.bitrate = 60, .hw_value = 0x04,},
5398 {.bitrate = 90, .hw_value = 0x05,},
5399 {.bitrate = 120, .hw_value = 0x06,},
5400 {.bitrate = 180, .hw_value = 0x07,},
5401 {.bitrate = 240, .hw_value = 0x08,},
5402 {.bitrate = 360, .hw_value = 0x09,},
5403 {.bitrate = 480, .hw_value = 0x0a,},
5404 {.bitrate = 540, .hw_value = 0x0b,},
5407 static void rtl8xxxu_desc_to_mcsrate(u16 rate, u8 *mcs, u8 *nss)
5409 if (rate <= DESC_RATE_54M)
5410 return;
5412 if (rate >= DESC_RATE_MCS0 && rate <= DESC_RATE_MCS15) {
5413 if (rate < DESC_RATE_MCS8)
5414 *nss = 1;
5415 else
5416 *nss = 2;
5417 *mcs = rate - DESC_RATE_MCS0;
5421 static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
5423 struct rtl8xxxu_priv *priv;
5424 struct rtl8723bu_c2h *c2h;
5425 struct sk_buff *skb = NULL;
5426 unsigned long flags;
5427 u8 bt_info = 0;
5428 struct rtl8xxxu_btcoex *btcoex;
5429 struct rtl8xxxu_ra_report *rarpt;
5430 u8 rate, sgi, bw;
5431 u32 bit_rate;
5432 u8 mcs = 0, nss = 0;
5434 priv = container_of(work, struct rtl8xxxu_priv, c2hcmd_work);
5435 btcoex = &priv->bt_coex;
5436 rarpt = &priv->ra_report;
5438 if (priv->rf_paths > 1)
5439 goto out;
5441 while (!skb_queue_empty(&priv->c2hcmd_queue)) {
5442 spin_lock_irqsave(&priv->c2hcmd_lock, flags);
5443 skb = __skb_dequeue(&priv->c2hcmd_queue);
5444 spin_unlock_irqrestore(&priv->c2hcmd_lock, flags);
5446 c2h = (struct rtl8723bu_c2h *)skb->data;
5448 switch (c2h->id) {
5449 case C2H_8723B_BT_INFO:
5450 bt_info = c2h->bt_info.bt_info;
5452 rtl8723bu_update_bt_link_info(priv, bt_info);
5453 if (btcoex->c2h_bt_inquiry) {
5454 rtl8723bu_handle_bt_inquiry(priv);
5455 break;
5457 rtl8723bu_handle_bt_info(priv);
5458 break;
5459 case C2H_8723B_RA_REPORT:
5460 rarpt->txrate.flags = 0;
5461 rate = c2h->ra_report.rate;
5462 sgi = c2h->ra_report.sgi;
5463 bw = c2h->ra_report.bw;
5465 if (rate < DESC_RATE_MCS0) {
5466 rarpt->txrate.legacy =
5467 rtl8xxxu_legacy_ratetable[rate].bitrate;
5468 } else {
5469 rtl8xxxu_desc_to_mcsrate(rate, &mcs, &nss);
5470 rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
5472 rarpt->txrate.mcs = mcs;
5473 rarpt->txrate.nss = nss;
5475 if (sgi) {
5476 rarpt->txrate.flags |=
5477 RATE_INFO_FLAGS_SHORT_GI;
5480 if (bw == RATE_INFO_BW_20)
5481 rarpt->txrate.bw |= RATE_INFO_BW_20;
5483 bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
5484 rarpt->bit_rate = bit_rate;
5485 rarpt->desc_rate = rate;
5486 break;
5487 default:
5488 break;
5492 out:
5493 dev_kfree_skb(skb);
5496 static void rtl8723bu_handle_c2h(struct rtl8xxxu_priv *priv,
5497 struct sk_buff *skb)
5499 struct rtl8723bu_c2h *c2h = (struct rtl8723bu_c2h *)skb->data;
5500 struct device *dev = &priv->udev->dev;
5501 int len;
5502 unsigned long flags;
5504 len = skb->len - 2;
5506 dev_dbg(dev, "C2H ID %02x seq %02x, len %02x source %02x\n",
5507 c2h->id, c2h->seq, len, c2h->bt_info.response_source);
5509 switch(c2h->id) {
5510 case C2H_8723B_BT_INFO:
5511 if (c2h->bt_info.response_source >
5512 BT_INFO_SRC_8723B_BT_ACTIVE_SEND)
5513 dev_dbg(dev, "C2H_BT_INFO WiFi only firmware\n");
5514 else
5515 dev_dbg(dev, "C2H_BT_INFO BT/WiFi coexist firmware\n");
5517 if (c2h->bt_info.bt_has_reset)
5518 dev_dbg(dev, "BT has been reset\n");
5519 if (c2h->bt_info.tx_rx_mask)
5520 dev_dbg(dev, "BT TRx mask\n");
5522 break;
5523 case C2H_8723B_BT_MP_INFO:
5524 dev_dbg(dev, "C2H_MP_INFO ext ID %02x, status %02x\n",
5525 c2h->bt_mp_info.ext_id, c2h->bt_mp_info.status);
5526 break;
5527 case C2H_8723B_RA_REPORT:
5528 dev_dbg(dev,
5529 "C2H RA RPT: rate %02x, unk %i, macid %02x, noise %i\n",
5530 c2h->ra_report.rate, c2h->ra_report.sgi,
5531 c2h->ra_report.macid, c2h->ra_report.noisy_state);
5532 break;
5533 default:
5534 dev_info(dev, "Unhandled C2H event %02x seq %02x\n",
5535 c2h->id, c2h->seq);
5536 print_hex_dump(KERN_INFO, "C2H content: ", DUMP_PREFIX_NONE,
5537 16, 1, c2h->raw.payload, len, false);
5538 break;
5541 spin_lock_irqsave(&priv->c2hcmd_lock, flags);
5542 __skb_queue_tail(&priv->c2hcmd_queue, skb);
5543 spin_unlock_irqrestore(&priv->c2hcmd_lock, flags);
5545 schedule_work(&priv->c2hcmd_work);
5548 int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb)
5550 struct ieee80211_hw *hw = priv->hw;
5551 struct ieee80211_rx_status *rx_status;
5552 struct rtl8xxxu_rxdesc16 *rx_desc;
5553 struct rtl8723au_phy_stats *phy_stats;
5554 struct sk_buff *next_skb = NULL;
5555 __le32 *_rx_desc_le;
5556 u32 *_rx_desc;
5557 int drvinfo_sz, desc_shift;
5558 int i, pkt_cnt, pkt_len, urb_len, pkt_offset;
5560 urb_len = skb->len;
5561 pkt_cnt = 0;
5563 do {
5564 rx_desc = (struct rtl8xxxu_rxdesc16 *)skb->data;
5565 _rx_desc_le = (__le32 *)skb->data;
5566 _rx_desc = (u32 *)skb->data;
5568 for (i = 0;
5569 i < (sizeof(struct rtl8xxxu_rxdesc16) / sizeof(u32)); i++)
5570 _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]);
5573 * Only read pkt_cnt from the header if we're parsing the
5574 * first packet
5576 if (!pkt_cnt)
5577 pkt_cnt = rx_desc->pkt_cnt;
5578 pkt_len = rx_desc->pktlen;
5580 drvinfo_sz = rx_desc->drvinfo_sz * 8;
5581 desc_shift = rx_desc->shift;
5582 pkt_offset = roundup(pkt_len + drvinfo_sz + desc_shift +
5583 sizeof(struct rtl8xxxu_rxdesc16), 128);
5586 * Only clone the skb if there's enough data at the end to
5587 * at least cover the rx descriptor
5589 if (pkt_cnt > 1 &&
5590 urb_len > (pkt_offset + sizeof(struct rtl8xxxu_rxdesc16)))
5591 next_skb = skb_clone(skb, GFP_ATOMIC);
5593 rx_status = IEEE80211_SKB_RXCB(skb);
5594 memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
5596 skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc16));
5598 phy_stats = (struct rtl8723au_phy_stats *)skb->data;
5600 skb_pull(skb, drvinfo_sz + desc_shift);
5602 skb_trim(skb, pkt_len);
5604 if (rx_desc->phy_stats)
5605 rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats,
5606 rx_desc->rxmcs);
5608 rx_status->mactime = rx_desc->tsfl;
5609 rx_status->flag |= RX_FLAG_MACTIME_START;
5611 if (!rx_desc->swdec)
5612 rx_status->flag |= RX_FLAG_DECRYPTED;
5613 if (rx_desc->crc32)
5614 rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
5615 if (rx_desc->bw)
5616 rx_status->bw = RATE_INFO_BW_40;
5618 if (rx_desc->rxht) {
5619 rx_status->encoding = RX_ENC_HT;
5620 rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0;
5621 } else {
5622 rx_status->rate_idx = rx_desc->rxmcs;
5625 rx_status->freq = hw->conf.chandef.chan->center_freq;
5626 rx_status->band = hw->conf.chandef.chan->band;
5628 ieee80211_rx_irqsafe(hw, skb);
5630 skb = next_skb;
5631 if (skb)
5632 skb_pull(next_skb, pkt_offset);
5634 pkt_cnt--;
5635 urb_len -= pkt_offset;
5636 } while (skb && urb_len > 0 && pkt_cnt > 0);
5638 return RX_TYPE_DATA_PKT;
5641 int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb)
5643 struct ieee80211_hw *hw = priv->hw;
5644 struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
5645 struct rtl8xxxu_rxdesc24 *rx_desc =
5646 (struct rtl8xxxu_rxdesc24 *)skb->data;
5647 struct rtl8723au_phy_stats *phy_stats;
5648 __le32 *_rx_desc_le = (__le32 *)skb->data;
5649 u32 *_rx_desc = (u32 *)skb->data;
5650 int drvinfo_sz, desc_shift;
5651 int i;
5653 for (i = 0; i < (sizeof(struct rtl8xxxu_rxdesc24) / sizeof(u32)); i++)
5654 _rx_desc[i] = le32_to_cpu(_rx_desc_le[i]);
5656 memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
5658 skb_pull(skb, sizeof(struct rtl8xxxu_rxdesc24));
5660 phy_stats = (struct rtl8723au_phy_stats *)skb->data;
5662 drvinfo_sz = rx_desc->drvinfo_sz * 8;
5663 desc_shift = rx_desc->shift;
5664 skb_pull(skb, drvinfo_sz + desc_shift);
5666 if (rx_desc->rpt_sel) {
5667 struct device *dev = &priv->udev->dev;
5668 dev_dbg(dev, "%s: C2H packet\n", __func__);
5669 rtl8723bu_handle_c2h(priv, skb);
5670 return RX_TYPE_C2H;
5673 if (rx_desc->phy_stats)
5674 rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats,
5675 rx_desc->rxmcs);
5677 rx_status->mactime = rx_desc->tsfl;
5678 rx_status->flag |= RX_FLAG_MACTIME_START;
5680 if (!rx_desc->swdec)
5681 rx_status->flag |= RX_FLAG_DECRYPTED;
5682 if (rx_desc->crc32)
5683 rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
5684 if (rx_desc->bw)
5685 rx_status->bw = RATE_INFO_BW_40;
5687 if (rx_desc->rxmcs >= DESC_RATE_MCS0) {
5688 rx_status->encoding = RX_ENC_HT;
5689 rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0;
5690 } else {
5691 rx_status->rate_idx = rx_desc->rxmcs;
5694 rx_status->freq = hw->conf.chandef.chan->center_freq;
5695 rx_status->band = hw->conf.chandef.chan->band;
5697 ieee80211_rx_irqsafe(hw, skb);
5698 return RX_TYPE_DATA_PKT;
5701 static void rtl8xxxu_rx_complete(struct urb *urb)
5703 struct rtl8xxxu_rx_urb *rx_urb =
5704 container_of(urb, struct rtl8xxxu_rx_urb, urb);
5705 struct ieee80211_hw *hw = rx_urb->hw;
5706 struct rtl8xxxu_priv *priv = hw->priv;
5707 struct sk_buff *skb = (struct sk_buff *)urb->context;
5708 struct device *dev = &priv->udev->dev;
5710 skb_put(skb, urb->actual_length);
5712 if (urb->status == 0) {
5713 priv->fops->parse_rx_desc(priv, skb);
5715 skb = NULL;
5716 rx_urb->urb.context = NULL;
5717 rtl8xxxu_queue_rx_urb(priv, rx_urb);
5718 } else {
5719 dev_dbg(dev, "%s: status %i\n", __func__, urb->status);
5720 goto cleanup;
5722 return;
5724 cleanup:
5725 usb_free_urb(urb);
5726 dev_kfree_skb(skb);
5727 return;
5730 static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv,
5731 struct rtl8xxxu_rx_urb *rx_urb)
5733 struct rtl8xxxu_fileops *fops = priv->fops;
5734 struct sk_buff *skb;
5735 int skb_size;
5736 int ret, rx_desc_sz;
5738 rx_desc_sz = fops->rx_desc_size;
5740 if (priv->rx_buf_aggregation && fops->rx_agg_buf_size) {
5741 skb_size = fops->rx_agg_buf_size;
5742 skb_size += (rx_desc_sz + sizeof(struct rtl8723au_phy_stats));
5743 } else {
5744 skb_size = IEEE80211_MAX_FRAME_LEN;
5747 skb = __netdev_alloc_skb(NULL, skb_size, GFP_KERNEL);
5748 if (!skb)
5749 return -ENOMEM;
5751 memset(skb->data, 0, rx_desc_sz);
5752 usb_fill_bulk_urb(&rx_urb->urb, priv->udev, priv->pipe_in, skb->data,
5753 skb_size, rtl8xxxu_rx_complete, skb);
5754 usb_anchor_urb(&rx_urb->urb, &priv->rx_anchor);
5755 ret = usb_submit_urb(&rx_urb->urb, GFP_ATOMIC);
5756 if (ret)
5757 usb_unanchor_urb(&rx_urb->urb);
5758 return ret;
5761 static void rtl8xxxu_int_complete(struct urb *urb)
5763 struct rtl8xxxu_priv *priv = (struct rtl8xxxu_priv *)urb->context;
5764 struct device *dev = &priv->udev->dev;
5765 int ret;
5767 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_INTERRUPT)
5768 dev_dbg(dev, "%s: status %i\n", __func__, urb->status);
5769 if (urb->status == 0) {
5770 usb_anchor_urb(urb, &priv->int_anchor);
5771 ret = usb_submit_urb(urb, GFP_ATOMIC);
5772 if (ret)
5773 usb_unanchor_urb(urb);
5774 } else {
5775 dev_dbg(dev, "%s: Error %i\n", __func__, urb->status);
5780 static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw)
5782 struct rtl8xxxu_priv *priv = hw->priv;
5783 struct urb *urb;
5784 u32 val32;
5785 int ret;
5787 urb = usb_alloc_urb(0, GFP_KERNEL);
5788 if (!urb)
5789 return -ENOMEM;
5791 usb_fill_int_urb(urb, priv->udev, priv->pipe_interrupt,
5792 priv->int_buf, USB_INTR_CONTENT_LENGTH,
5793 rtl8xxxu_int_complete, priv, 1);
5794 usb_anchor_urb(urb, &priv->int_anchor);
5795 ret = usb_submit_urb(urb, GFP_KERNEL);
5796 if (ret) {
5797 usb_unanchor_urb(urb);
5798 usb_free_urb(urb);
5799 goto error;
5802 val32 = rtl8xxxu_read32(priv, REG_USB_HIMR);
5803 val32 |= USB_HIMR_CPWM;
5804 rtl8xxxu_write32(priv, REG_USB_HIMR, val32);
5806 error:
5807 return ret;
5810 static int rtl8xxxu_add_interface(struct ieee80211_hw *hw,
5811 struct ieee80211_vif *vif)
5813 struct rtl8xxxu_priv *priv = hw->priv;
5814 int ret;
5815 u8 val8;
5817 switch (vif->type) {
5818 case NL80211_IFTYPE_STATION:
5819 if (!priv->vif)
5820 priv->vif = vif;
5821 else
5822 return -EOPNOTSUPP;
5823 rtl8xxxu_stop_tx_beacon(priv);
5825 val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
5826 val8 |= BEACON_ATIM | BEACON_FUNCTION_ENABLE |
5827 BEACON_DISABLE_TSF_UPDATE;
5828 rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
5829 ret = 0;
5830 break;
5831 default:
5832 ret = -EOPNOTSUPP;
5835 rtl8xxxu_set_linktype(priv, vif->type);
5837 return ret;
5840 static void rtl8xxxu_remove_interface(struct ieee80211_hw *hw,
5841 struct ieee80211_vif *vif)
5843 struct rtl8xxxu_priv *priv = hw->priv;
5845 dev_dbg(&priv->udev->dev, "%s\n", __func__);
5847 if (priv->vif)
5848 priv->vif = NULL;
5851 static int rtl8xxxu_config(struct ieee80211_hw *hw, u32 changed)
5853 struct rtl8xxxu_priv *priv = hw->priv;
5854 struct device *dev = &priv->udev->dev;
5855 u16 val16;
5856 int ret = 0, channel;
5857 bool ht40;
5859 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_CHANNEL)
5860 dev_info(dev,
5861 "%s: channel: %i (changed %08x chandef.width %02x)\n",
5862 __func__, hw->conf.chandef.chan->hw_value,
5863 changed, hw->conf.chandef.width);
5865 if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
5866 val16 = ((hw->conf.long_frame_max_tx_count <<
5867 RETRY_LIMIT_LONG_SHIFT) & RETRY_LIMIT_LONG_MASK) |
5868 ((hw->conf.short_frame_max_tx_count <<
5869 RETRY_LIMIT_SHORT_SHIFT) & RETRY_LIMIT_SHORT_MASK);
5870 rtl8xxxu_write16(priv, REG_RETRY_LIMIT, val16);
5873 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
5874 switch (hw->conf.chandef.width) {
5875 case NL80211_CHAN_WIDTH_20_NOHT:
5876 case NL80211_CHAN_WIDTH_20:
5877 ht40 = false;
5878 break;
5879 case NL80211_CHAN_WIDTH_40:
5880 ht40 = true;
5881 break;
5882 default:
5883 ret = -ENOTSUPP;
5884 goto exit;
5887 channel = hw->conf.chandef.chan->hw_value;
5889 priv->fops->set_tx_power(priv, channel, ht40);
5891 priv->fops->config_channel(hw);
5894 exit:
5895 return ret;
5898 static int rtl8xxxu_conf_tx(struct ieee80211_hw *hw,
5899 struct ieee80211_vif *vif, u16 queue,
5900 const struct ieee80211_tx_queue_params *param)
5902 struct rtl8xxxu_priv *priv = hw->priv;
5903 struct device *dev = &priv->udev->dev;
5904 u32 val32;
5905 u8 aifs, acm_ctrl, acm_bit;
5907 aifs = param->aifs;
5909 val32 = aifs |
5910 fls(param->cw_min) << EDCA_PARAM_ECW_MIN_SHIFT |
5911 fls(param->cw_max) << EDCA_PARAM_ECW_MAX_SHIFT |
5912 (u32)param->txop << EDCA_PARAM_TXOP_SHIFT;
5914 acm_ctrl = rtl8xxxu_read8(priv, REG_ACM_HW_CTRL);
5915 dev_dbg(dev,
5916 "%s: IEEE80211 queue %02x val %08x, acm %i, acm_ctrl %02x\n",
5917 __func__, queue, val32, param->acm, acm_ctrl);
5919 switch (queue) {
5920 case IEEE80211_AC_VO:
5921 acm_bit = ACM_HW_CTRL_VO;
5922 rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, val32);
5923 break;
5924 case IEEE80211_AC_VI:
5925 acm_bit = ACM_HW_CTRL_VI;
5926 rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, val32);
5927 break;
5928 case IEEE80211_AC_BE:
5929 acm_bit = ACM_HW_CTRL_BE;
5930 rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, val32);
5931 break;
5932 case IEEE80211_AC_BK:
5933 acm_bit = ACM_HW_CTRL_BK;
5934 rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, val32);
5935 break;
5936 default:
5937 acm_bit = 0;
5938 break;
5941 if (param->acm)
5942 acm_ctrl |= acm_bit;
5943 else
5944 acm_ctrl &= ~acm_bit;
5945 rtl8xxxu_write8(priv, REG_ACM_HW_CTRL, acm_ctrl);
5947 return 0;
5950 static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
5951 unsigned int changed_flags,
5952 unsigned int *total_flags, u64 multicast)
5954 struct rtl8xxxu_priv *priv = hw->priv;
5955 u32 rcr = rtl8xxxu_read32(priv, REG_RCR);
5957 dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n",
5958 __func__, changed_flags, *total_flags);
5961 * FIF_ALLMULTI ignored as all multicast frames are accepted (REG_MAR)
5964 if (*total_flags & FIF_FCSFAIL)
5965 rcr |= RCR_ACCEPT_CRC32;
5966 else
5967 rcr &= ~RCR_ACCEPT_CRC32;
5970 * FIF_PLCPFAIL not supported?
5973 if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
5974 rcr &= ~RCR_CHECK_BSSID_BEACON;
5975 else
5976 rcr |= RCR_CHECK_BSSID_BEACON;
5978 if (*total_flags & FIF_CONTROL)
5979 rcr |= RCR_ACCEPT_CTRL_FRAME;
5980 else
5981 rcr &= ~RCR_ACCEPT_CTRL_FRAME;
5983 if (*total_flags & FIF_OTHER_BSS) {
5984 rcr |= RCR_ACCEPT_AP;
5985 rcr &= ~RCR_CHECK_BSSID_MATCH;
5986 } else {
5987 rcr &= ~RCR_ACCEPT_AP;
5988 rcr |= RCR_CHECK_BSSID_MATCH;
5991 if (*total_flags & FIF_PSPOLL)
5992 rcr |= RCR_ACCEPT_PM;
5993 else
5994 rcr &= ~RCR_ACCEPT_PM;
5997 * FIF_PROBE_REQ ignored as probe requests always seem to be accepted
6000 rtl8xxxu_write32(priv, REG_RCR, rcr);
6002 *total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC |
6003 FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL |
6004 FIF_PROBE_REQ);
6007 static int rtl8xxxu_set_rts_threshold(struct ieee80211_hw *hw, u32 rts)
6009 if (rts > 2347)
6010 return -EINVAL;
6012 return 0;
6015 static int rtl8xxxu_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
6016 struct ieee80211_vif *vif,
6017 struct ieee80211_sta *sta,
6018 struct ieee80211_key_conf *key)
6020 struct rtl8xxxu_priv *priv = hw->priv;
6021 struct device *dev = &priv->udev->dev;
6022 u8 mac_addr[ETH_ALEN];
6023 u8 val8;
6024 u16 val16;
6025 u32 val32;
6026 int retval = -EOPNOTSUPP;
6028 dev_dbg(dev, "%s: cmd %02x, cipher %08x, index %i\n",
6029 __func__, cmd, key->cipher, key->keyidx);
6031 if (vif->type != NL80211_IFTYPE_STATION)
6032 return -EOPNOTSUPP;
6034 if (key->keyidx > 3)
6035 return -EOPNOTSUPP;
6037 switch (key->cipher) {
6038 case WLAN_CIPHER_SUITE_WEP40:
6039 case WLAN_CIPHER_SUITE_WEP104:
6041 break;
6042 case WLAN_CIPHER_SUITE_CCMP:
6043 key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
6044 break;
6045 case WLAN_CIPHER_SUITE_TKIP:
6046 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
6047 break;
6048 default:
6049 return -EOPNOTSUPP;
6052 if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
6053 dev_dbg(dev, "%s: pairwise key\n", __func__);
6054 ether_addr_copy(mac_addr, sta->addr);
6055 } else {
6056 dev_dbg(dev, "%s: group key\n", __func__);
6057 eth_broadcast_addr(mac_addr);
6060 val16 = rtl8xxxu_read16(priv, REG_CR);
6061 val16 |= CR_SECURITY_ENABLE;
6062 rtl8xxxu_write16(priv, REG_CR, val16);
6064 val8 = SEC_CFG_TX_SEC_ENABLE | SEC_CFG_TXBC_USE_DEFKEY |
6065 SEC_CFG_RX_SEC_ENABLE | SEC_CFG_RXBC_USE_DEFKEY;
6066 val8 |= SEC_CFG_TX_USE_DEFKEY | SEC_CFG_RX_USE_DEFKEY;
6067 rtl8xxxu_write8(priv, REG_SECURITY_CFG, val8);
6069 switch (cmd) {
6070 case SET_KEY:
6071 key->hw_key_idx = key->keyidx;
6072 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
6073 rtl8xxxu_cam_write(priv, key, mac_addr);
6074 retval = 0;
6075 break;
6076 case DISABLE_KEY:
6077 rtl8xxxu_write32(priv, REG_CAM_WRITE, 0x00000000);
6078 val32 = CAM_CMD_POLLING | CAM_CMD_WRITE |
6079 key->keyidx << CAM_CMD_KEY_SHIFT;
6080 rtl8xxxu_write32(priv, REG_CAM_CMD, val32);
6081 retval = 0;
6082 break;
6083 default:
6084 dev_warn(dev, "%s: Unsupported command %02x\n", __func__, cmd);
6087 return retval;
6090 static int
6091 rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
6092 struct ieee80211_ampdu_params *params)
6094 struct rtl8xxxu_priv *priv = hw->priv;
6095 struct device *dev = &priv->udev->dev;
6096 u8 ampdu_factor, ampdu_density;
6097 struct ieee80211_sta *sta = params->sta;
6098 enum ieee80211_ampdu_mlme_action action = params->action;
6100 switch (action) {
6101 case IEEE80211_AMPDU_TX_START:
6102 dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_START\n", __func__);
6103 ampdu_factor = sta->ht_cap.ampdu_factor;
6104 ampdu_density = sta->ht_cap.ampdu_density;
6105 rtl8xxxu_set_ampdu_factor(priv, ampdu_factor);
6106 rtl8xxxu_set_ampdu_min_space(priv, ampdu_density);
6107 dev_dbg(dev,
6108 "Changed HT: ampdu_factor %02x, ampdu_density %02x\n",
6109 ampdu_factor, ampdu_density);
6110 break;
6111 case IEEE80211_AMPDU_TX_STOP_FLUSH:
6112 dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__);
6113 rtl8xxxu_set_ampdu_factor(priv, 0);
6114 rtl8xxxu_set_ampdu_min_space(priv, 0);
6115 break;
6116 case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
6117 dev_dbg(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n",
6118 __func__);
6119 rtl8xxxu_set_ampdu_factor(priv, 0);
6120 rtl8xxxu_set_ampdu_min_space(priv, 0);
6121 break;
6122 case IEEE80211_AMPDU_RX_START:
6123 dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);
6124 break;
6125 case IEEE80211_AMPDU_RX_STOP:
6126 dev_dbg(dev, "%s: IEEE80211_AMPDU_RX_STOP\n", __func__);
6127 break;
6128 default:
6129 break;
6131 return 0;
6134 static void
6135 rtl8xxxu_sta_statistics(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
6136 struct ieee80211_sta *sta, struct station_info *sinfo)
6138 struct rtl8xxxu_priv *priv = hw->priv;
6140 sinfo->txrate = priv->ra_report.txrate;
6141 sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
6144 static u8 rtl8xxxu_signal_to_snr(int signal)
6146 if (signal < RTL8XXXU_NOISE_FLOOR_MIN)
6147 signal = RTL8XXXU_NOISE_FLOOR_MIN;
6148 else if (signal > 0)
6149 signal = 0;
6150 return (u8)(signal - RTL8XXXU_NOISE_FLOOR_MIN);
6153 static void rtl8xxxu_refresh_rate_mask(struct rtl8xxxu_priv *priv,
6154 int signal, struct ieee80211_sta *sta)
6156 struct ieee80211_hw *hw = priv->hw;
6157 u16 wireless_mode;
6158 u8 rssi_level, ratr_idx;
6159 u8 txbw_40mhz;
6160 u8 snr, snr_thresh_high, snr_thresh_low;
6161 u8 go_up_gap = 5;
6163 rssi_level = priv->rssi_level;
6164 snr = rtl8xxxu_signal_to_snr(signal);
6165 snr_thresh_high = RTL8XXXU_SNR_THRESH_HIGH;
6166 snr_thresh_low = RTL8XXXU_SNR_THRESH_LOW;
6167 txbw_40mhz = (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) ? 1 : 0;
6169 switch (rssi_level) {
6170 case RTL8XXXU_RATR_STA_MID:
6171 snr_thresh_high += go_up_gap;
6172 break;
6173 case RTL8XXXU_RATR_STA_LOW:
6174 snr_thresh_high += go_up_gap;
6175 snr_thresh_low += go_up_gap;
6176 break;
6177 default:
6178 break;
6181 if (snr > snr_thresh_high)
6182 rssi_level = RTL8XXXU_RATR_STA_HIGH;
6183 else if (snr > snr_thresh_low)
6184 rssi_level = RTL8XXXU_RATR_STA_MID;
6185 else
6186 rssi_level = RTL8XXXU_RATR_STA_LOW;
6188 if (rssi_level != priv->rssi_level) {
6189 int sgi = 0;
6190 u32 rate_bitmap = 0;
6192 rcu_read_lock();
6193 rate_bitmap = (sta->supp_rates[0] & 0xfff) |
6194 (sta->ht_cap.mcs.rx_mask[0] << 12) |
6195 (sta->ht_cap.mcs.rx_mask[1] << 20);
6196 if (sta->ht_cap.cap &
6197 (IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))
6198 sgi = 1;
6199 rcu_read_unlock();
6201 wireless_mode = rtl8xxxu_wireless_mode(hw, sta);
6202 switch (wireless_mode) {
6203 case WIRELESS_MODE_B:
6204 ratr_idx = RATEID_IDX_B;
6205 if (rate_bitmap & 0x0000000c)
6206 rate_bitmap &= 0x0000000d;
6207 else
6208 rate_bitmap &= 0x0000000f;
6209 break;
6210 case WIRELESS_MODE_A:
6211 case WIRELESS_MODE_G:
6212 ratr_idx = RATEID_IDX_G;
6213 if (rssi_level == RTL8XXXU_RATR_STA_HIGH)
6214 rate_bitmap &= 0x00000f00;
6215 else
6216 rate_bitmap &= 0x00000ff0;
6217 break;
6218 case (WIRELESS_MODE_B | WIRELESS_MODE_G):
6219 ratr_idx = RATEID_IDX_BG;
6220 if (rssi_level == RTL8XXXU_RATR_STA_HIGH)
6221 rate_bitmap &= 0x00000f00;
6222 else if (rssi_level == RTL8XXXU_RATR_STA_MID)
6223 rate_bitmap &= 0x00000ff0;
6224 else
6225 rate_bitmap &= 0x00000ff5;
6226 break;
6227 case WIRELESS_MODE_N_24G:
6228 case WIRELESS_MODE_N_5G:
6229 case (WIRELESS_MODE_G | WIRELESS_MODE_N_24G):
6230 case (WIRELESS_MODE_A | WIRELESS_MODE_N_5G):
6231 if (priv->tx_paths == 2 && priv->rx_paths == 2)
6232 ratr_idx = RATEID_IDX_GN_N2SS;
6233 else
6234 ratr_idx = RATEID_IDX_GN_N1SS;
6235 break;
6236 case (WIRELESS_MODE_B | WIRELESS_MODE_G | WIRELESS_MODE_N_24G):
6237 case (WIRELESS_MODE_B | WIRELESS_MODE_N_24G):
6238 if (txbw_40mhz) {
6239 if (priv->tx_paths == 2 && priv->rx_paths == 2)
6240 ratr_idx = RATEID_IDX_BGN_40M_2SS;
6241 else
6242 ratr_idx = RATEID_IDX_BGN_40M_1SS;
6243 } else {
6244 if (priv->tx_paths == 2 && priv->rx_paths == 2)
6245 ratr_idx = RATEID_IDX_BGN_20M_2SS_BN;
6246 else
6247 ratr_idx = RATEID_IDX_BGN_20M_1SS_BN;
6250 if (priv->tx_paths == 2 && priv->rx_paths == 2) {
6251 if (rssi_level == RTL8XXXU_RATR_STA_HIGH) {
6252 rate_bitmap &= 0x0f8f0000;
6253 } else if (rssi_level == RTL8XXXU_RATR_STA_MID) {
6254 rate_bitmap &= 0x0f8ff000;
6255 } else {
6256 if (txbw_40mhz)
6257 rate_bitmap &= 0x0f8ff015;
6258 else
6259 rate_bitmap &= 0x0f8ff005;
6261 } else {
6262 if (rssi_level == RTL8XXXU_RATR_STA_HIGH) {
6263 rate_bitmap &= 0x000f0000;
6264 } else if (rssi_level == RTL8XXXU_RATR_STA_MID) {
6265 rate_bitmap &= 0x000ff000;
6266 } else {
6267 if (txbw_40mhz)
6268 rate_bitmap &= 0x000ff015;
6269 else
6270 rate_bitmap &= 0x000ff005;
6273 break;
6274 default:
6275 ratr_idx = RATEID_IDX_BGN_40M_2SS;
6276 rate_bitmap &= 0x0fffffff;
6277 break;
6280 priv->rssi_level = rssi_level;
6281 priv->fops->update_rate_mask(priv, rate_bitmap, ratr_idx, sgi);
6285 static void rtl8xxxu_watchdog_callback(struct work_struct *work)
6287 struct ieee80211_vif *vif;
6288 struct rtl8xxxu_priv *priv;
6290 priv = container_of(work, struct rtl8xxxu_priv, ra_watchdog.work);
6291 vif = priv->vif;
6293 if (vif && vif->type == NL80211_IFTYPE_STATION) {
6294 int signal;
6295 struct ieee80211_sta *sta;
6297 rcu_read_lock();
6298 sta = ieee80211_find_sta(vif, vif->bss_conf.bssid);
6299 if (!sta) {
6300 struct device *dev = &priv->udev->dev;
6302 dev_dbg(dev, "%s: no sta found\n", __func__);
6303 rcu_read_unlock();
6304 goto out;
6306 rcu_read_unlock();
6308 signal = ieee80211_ave_rssi(vif);
6309 rtl8xxxu_refresh_rate_mask(priv, signal, sta);
6312 out:
6313 schedule_delayed_work(&priv->ra_watchdog, 2 * HZ);
6316 static int rtl8xxxu_start(struct ieee80211_hw *hw)
6318 struct rtl8xxxu_priv *priv = hw->priv;
6319 struct rtl8xxxu_rx_urb *rx_urb;
6320 struct rtl8xxxu_tx_urb *tx_urb;
6321 unsigned long flags;
6322 int ret, i;
6324 ret = 0;
6326 init_usb_anchor(&priv->rx_anchor);
6327 init_usb_anchor(&priv->tx_anchor);
6328 init_usb_anchor(&priv->int_anchor);
6330 priv->fops->enable_rf(priv);
6331 if (priv->usb_interrupts) {
6332 ret = rtl8xxxu_submit_int_urb(hw);
6333 if (ret)
6334 goto exit;
6337 for (i = 0; i < RTL8XXXU_TX_URBS; i++) {
6338 tx_urb = kmalloc(sizeof(struct rtl8xxxu_tx_urb), GFP_KERNEL);
6339 if (!tx_urb) {
6340 if (!i)
6341 ret = -ENOMEM;
6343 goto error_out;
6345 usb_init_urb(&tx_urb->urb);
6346 INIT_LIST_HEAD(&tx_urb->list);
6347 tx_urb->hw = hw;
6348 list_add(&tx_urb->list, &priv->tx_urb_free_list);
6349 priv->tx_urb_free_count++;
6352 priv->tx_stopped = false;
6354 spin_lock_irqsave(&priv->rx_urb_lock, flags);
6355 priv->shutdown = false;
6356 spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
6358 for (i = 0; i < RTL8XXXU_RX_URBS; i++) {
6359 rx_urb = kmalloc(sizeof(struct rtl8xxxu_rx_urb), GFP_KERNEL);
6360 if (!rx_urb) {
6361 if (!i)
6362 ret = -ENOMEM;
6364 goto error_out;
6366 usb_init_urb(&rx_urb->urb);
6367 INIT_LIST_HEAD(&rx_urb->list);
6368 rx_urb->hw = hw;
6370 ret = rtl8xxxu_submit_rx_urb(priv, rx_urb);
6373 schedule_delayed_work(&priv->ra_watchdog, 2 * HZ);
6374 exit:
6376 * Accept all data and mgmt frames
6378 rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff);
6379 rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff);
6381 rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, 0x6954341e);
6383 return ret;
6385 error_out:
6386 rtl8xxxu_free_tx_resources(priv);
6388 * Disable all data and mgmt frames
6390 rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000);
6391 rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0x0000);
6393 return ret;
6396 static void rtl8xxxu_stop(struct ieee80211_hw *hw)
6398 struct rtl8xxxu_priv *priv = hw->priv;
6399 unsigned long flags;
6401 rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
6403 rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0x0000);
6404 rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000);
6406 spin_lock_irqsave(&priv->rx_urb_lock, flags);
6407 priv->shutdown = true;
6408 spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
6410 usb_kill_anchored_urbs(&priv->rx_anchor);
6411 usb_kill_anchored_urbs(&priv->tx_anchor);
6412 if (priv->usb_interrupts)
6413 usb_kill_anchored_urbs(&priv->int_anchor);
6415 rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
6417 priv->fops->disable_rf(priv);
6420 * Disable interrupts
6422 if (priv->usb_interrupts)
6423 rtl8xxxu_write32(priv, REG_USB_HIMR, 0);
6425 cancel_delayed_work_sync(&priv->ra_watchdog);
6427 rtl8xxxu_free_rx_resources(priv);
6428 rtl8xxxu_free_tx_resources(priv);
6431 static const struct ieee80211_ops rtl8xxxu_ops = {
6432 .tx = rtl8xxxu_tx,
6433 .add_interface = rtl8xxxu_add_interface,
6434 .remove_interface = rtl8xxxu_remove_interface,
6435 .config = rtl8xxxu_config,
6436 .conf_tx = rtl8xxxu_conf_tx,
6437 .bss_info_changed = rtl8xxxu_bss_info_changed,
6438 .configure_filter = rtl8xxxu_configure_filter,
6439 .set_rts_threshold = rtl8xxxu_set_rts_threshold,
6440 .start = rtl8xxxu_start,
6441 .stop = rtl8xxxu_stop,
6442 .sw_scan_start = rtl8xxxu_sw_scan_start,
6443 .sw_scan_complete = rtl8xxxu_sw_scan_complete,
6444 .set_key = rtl8xxxu_set_key,
6445 .ampdu_action = rtl8xxxu_ampdu_action,
6446 .sta_statistics = rtl8xxxu_sta_statistics,
6449 static int rtl8xxxu_parse_usb(struct rtl8xxxu_priv *priv,
6450 struct usb_interface *interface)
6452 struct usb_interface_descriptor *interface_desc;
6453 struct usb_host_interface *host_interface;
6454 struct usb_endpoint_descriptor *endpoint;
6455 struct device *dev = &priv->udev->dev;
6456 int i, j = 0, endpoints;
6457 u8 dir, xtype, num;
6458 int ret = 0;
6460 host_interface = interface->cur_altsetting;
6461 interface_desc = &host_interface->desc;
6462 endpoints = interface_desc->bNumEndpoints;
6464 for (i = 0; i < endpoints; i++) {
6465 endpoint = &host_interface->endpoint[i].desc;
6467 dir = endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
6468 num = usb_endpoint_num(endpoint);
6469 xtype = usb_endpoint_type(endpoint);
6470 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
6471 dev_dbg(dev,
6472 "%s: endpoint: dir %02x, # %02x, type %02x\n",
6473 __func__, dir, num, xtype);
6474 if (usb_endpoint_dir_in(endpoint) &&
6475 usb_endpoint_xfer_bulk(endpoint)) {
6476 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
6477 dev_dbg(dev, "%s: in endpoint num %i\n",
6478 __func__, num);
6480 if (priv->pipe_in) {
6481 dev_warn(dev,
6482 "%s: Too many IN pipes\n", __func__);
6483 ret = -EINVAL;
6484 goto exit;
6487 priv->pipe_in = usb_rcvbulkpipe(priv->udev, num);
6490 if (usb_endpoint_dir_in(endpoint) &&
6491 usb_endpoint_xfer_int(endpoint)) {
6492 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
6493 dev_dbg(dev, "%s: interrupt endpoint num %i\n",
6494 __func__, num);
6496 if (priv->pipe_interrupt) {
6497 dev_warn(dev, "%s: Too many INTERRUPT pipes\n",
6498 __func__);
6499 ret = -EINVAL;
6500 goto exit;
6503 priv->pipe_interrupt = usb_rcvintpipe(priv->udev, num);
6506 if (usb_endpoint_dir_out(endpoint) &&
6507 usb_endpoint_xfer_bulk(endpoint)) {
6508 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
6509 dev_dbg(dev, "%s: out endpoint num %i\n",
6510 __func__, num);
6511 if (j >= RTL8XXXU_OUT_ENDPOINTS) {
6512 dev_warn(dev,
6513 "%s: Too many OUT pipes\n", __func__);
6514 ret = -EINVAL;
6515 goto exit;
6517 priv->out_ep[j++] = num;
6520 exit:
6521 priv->nr_out_eps = j;
6522 return ret;
6525 static int rtl8xxxu_probe(struct usb_interface *interface,
6526 const struct usb_device_id *id)
6528 struct rtl8xxxu_priv *priv;
6529 struct ieee80211_hw *hw;
6530 struct usb_device *udev;
6531 struct ieee80211_supported_band *sband;
6532 int ret;
6533 int untested = 1;
6535 udev = usb_get_dev(interface_to_usbdev(interface));
6537 switch (id->idVendor) {
6538 case USB_VENDOR_ID_REALTEK:
6539 switch(id->idProduct) {
6540 case 0x1724:
6541 case 0x8176:
6542 case 0x8178:
6543 case 0x817f:
6544 case 0x818b:
6545 untested = 0;
6546 break;
6548 break;
6549 case 0x7392:
6550 if (id->idProduct == 0x7811 || id->idProduct == 0xa611)
6551 untested = 0;
6552 break;
6553 case 0x050d:
6554 if (id->idProduct == 0x1004)
6555 untested = 0;
6556 break;
6557 case 0x20f4:
6558 if (id->idProduct == 0x648b)
6559 untested = 0;
6560 break;
6561 case 0x2001:
6562 if (id->idProduct == 0x3308)
6563 untested = 0;
6564 break;
6565 case 0x2357:
6566 if (id->idProduct == 0x0109)
6567 untested = 0;
6568 break;
6569 default:
6570 break;
6573 if (untested) {
6574 rtl8xxxu_debug |= RTL8XXXU_DEBUG_EFUSE;
6575 dev_info(&udev->dev,
6576 "This Realtek USB WiFi dongle (0x%04x:0x%04x) is untested!\n",
6577 id->idVendor, id->idProduct);
6578 dev_info(&udev->dev,
6579 "Please report results to Jes.Sorensen@gmail.com\n");
6582 hw = ieee80211_alloc_hw(sizeof(struct rtl8xxxu_priv), &rtl8xxxu_ops);
6583 if (!hw) {
6584 ret = -ENOMEM;
6585 priv = NULL;
6586 goto exit;
6589 priv = hw->priv;
6590 priv->hw = hw;
6591 priv->udev = udev;
6592 priv->fops = (struct rtl8xxxu_fileops *)id->driver_info;
6593 mutex_init(&priv->usb_buf_mutex);
6594 mutex_init(&priv->h2c_mutex);
6595 INIT_LIST_HEAD(&priv->tx_urb_free_list);
6596 spin_lock_init(&priv->tx_urb_lock);
6597 INIT_LIST_HEAD(&priv->rx_urb_pending_list);
6598 spin_lock_init(&priv->rx_urb_lock);
6599 INIT_WORK(&priv->rx_urb_wq, rtl8xxxu_rx_urb_work);
6600 INIT_DELAYED_WORK(&priv->ra_watchdog, rtl8xxxu_watchdog_callback);
6601 spin_lock_init(&priv->c2hcmd_lock);
6602 INIT_WORK(&priv->c2hcmd_work, rtl8xxxu_c2hcmd_callback);
6603 skb_queue_head_init(&priv->c2hcmd_queue);
6605 usb_set_intfdata(interface, hw);
6607 ret = rtl8xxxu_parse_usb(priv, interface);
6608 if (ret)
6609 goto exit;
6611 ret = rtl8xxxu_identify_chip(priv);
6612 if (ret) {
6613 dev_err(&udev->dev, "Fatal - failed to identify chip\n");
6614 goto exit;
6617 ret = rtl8xxxu_read_efuse(priv);
6618 if (ret) {
6619 dev_err(&udev->dev, "Fatal - failed to read EFuse\n");
6620 goto exit;
6623 ret = priv->fops->parse_efuse(priv);
6624 if (ret) {
6625 dev_err(&udev->dev, "Fatal - failed to parse EFuse\n");
6626 goto exit;
6629 rtl8xxxu_print_chipinfo(priv);
6631 ret = priv->fops->load_firmware(priv);
6632 if (ret) {
6633 dev_err(&udev->dev, "Fatal - failed to load firmware\n");
6634 goto exit;
6637 ret = rtl8xxxu_init_device(hw);
6638 if (ret)
6639 goto exit;
6641 hw->wiphy->max_scan_ssids = 1;
6642 hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
6643 hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
6644 hw->queues = 4;
6646 sband = &rtl8xxxu_supported_band;
6647 sband->ht_cap.ht_supported = true;
6648 sband->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
6649 sband->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16;
6650 sband->ht_cap.cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40;
6651 memset(&sband->ht_cap.mcs, 0, sizeof(sband->ht_cap.mcs));
6652 sband->ht_cap.mcs.rx_mask[0] = 0xff;
6653 sband->ht_cap.mcs.rx_mask[4] = 0x01;
6654 if (priv->rf_paths > 1) {
6655 sband->ht_cap.mcs.rx_mask[1] = 0xff;
6656 sband->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
6658 sband->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
6660 * Some APs will negotiate HT20_40 in a noisy environment leading
6661 * to miserable performance. Rather than defaulting to this, only
6662 * enable it if explicitly requested at module load time.
6664 if (rtl8xxxu_ht40_2g) {
6665 dev_info(&udev->dev, "Enabling HT_20_40 on the 2.4GHz band\n");
6666 sband->ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
6668 hw->wiphy->bands[NL80211_BAND_2GHZ] = sband;
6670 hw->wiphy->rts_threshold = 2347;
6672 SET_IEEE80211_DEV(priv->hw, &interface->dev);
6673 SET_IEEE80211_PERM_ADDR(hw, priv->mac_addr);
6675 hw->extra_tx_headroom = priv->fops->tx_desc_size;
6676 ieee80211_hw_set(hw, SIGNAL_DBM);
6678 * The firmware handles rate control
6680 ieee80211_hw_set(hw, HAS_RATE_CONTROL);
6681 ieee80211_hw_set(hw, AMPDU_AGGREGATION);
6683 wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
6685 ret = ieee80211_register_hw(priv->hw);
6686 if (ret) {
6687 dev_err(&udev->dev, "%s: Failed to register: %i\n",
6688 __func__, ret);
6689 goto exit;
6692 return 0;
6694 exit:
6695 usb_set_intfdata(interface, NULL);
6697 if (priv) {
6698 kfree(priv->fw_data);
6699 mutex_destroy(&priv->usb_buf_mutex);
6700 mutex_destroy(&priv->h2c_mutex);
6702 usb_put_dev(udev);
6704 ieee80211_free_hw(hw);
6706 return ret;
6709 static void rtl8xxxu_disconnect(struct usb_interface *interface)
6711 struct rtl8xxxu_priv *priv;
6712 struct ieee80211_hw *hw;
6714 hw = usb_get_intfdata(interface);
6715 priv = hw->priv;
6717 ieee80211_unregister_hw(hw);
6719 priv->fops->power_off(priv);
6721 usb_set_intfdata(interface, NULL);
6723 dev_info(&priv->udev->dev, "disconnecting\n");
6725 kfree(priv->fw_data);
6726 mutex_destroy(&priv->usb_buf_mutex);
6727 mutex_destroy(&priv->h2c_mutex);
6729 if (priv->udev->state != USB_STATE_NOTATTACHED) {
6730 dev_info(&priv->udev->dev,
6731 "Device still attached, trying to reset\n");
6732 usb_reset_device(priv->udev);
6734 usb_put_dev(priv->udev);
6735 ieee80211_free_hw(hw);
6738 static const struct usb_device_id dev_table[] = {
6739 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8724, 0xff, 0xff, 0xff),
6740 .driver_info = (unsigned long)&rtl8723au_fops},
6741 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x1724, 0xff, 0xff, 0xff),
6742 .driver_info = (unsigned long)&rtl8723au_fops},
6743 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0724, 0xff, 0xff, 0xff),
6744 .driver_info = (unsigned long)&rtl8723au_fops},
6745 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818b, 0xff, 0xff, 0xff),
6746 .driver_info = (unsigned long)&rtl8192eu_fops},
6747 /* TP-Link TL-WN822N v4 */
6748 {USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0108, 0xff, 0xff, 0xff),
6749 .driver_info = (unsigned long)&rtl8192eu_fops},
6750 /* D-Link DWA-131 rev E1, tested by David Patiño */
6751 {USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3319, 0xff, 0xff, 0xff),
6752 .driver_info = (unsigned long)&rtl8192eu_fops},
6753 /* Tested by Myckel Habets */
6754 {USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0109, 0xff, 0xff, 0xff),
6755 .driver_info = (unsigned long)&rtl8192eu_fops},
6756 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff),
6757 .driver_info = (unsigned long)&rtl8723bu_fops},
6758 {USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0xa611, 0xff, 0xff, 0xff),
6759 .driver_info = (unsigned long)&rtl8723bu_fops},
6760 #ifdef CONFIG_RTL8XXXU_UNTESTED
6761 /* Still supported by rtlwifi */
6762 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff),
6763 .driver_info = (unsigned long)&rtl8192cu_fops},
6764 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8178, 0xff, 0xff, 0xff),
6765 .driver_info = (unsigned long)&rtl8192cu_fops},
6766 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817f, 0xff, 0xff, 0xff),
6767 .driver_info = (unsigned long)&rtl8192cu_fops},
6768 /* Tested by Larry Finger */
6769 {USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0x7811, 0xff, 0xff, 0xff),
6770 .driver_info = (unsigned long)&rtl8192cu_fops},
6771 /* Tested by Andrea Merello */
6772 {USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1004, 0xff, 0xff, 0xff),
6773 .driver_info = (unsigned long)&rtl8192cu_fops},
6774 /* Tested by Jocelyn Mayer */
6775 {USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x648b, 0xff, 0xff, 0xff),
6776 .driver_info = (unsigned long)&rtl8192cu_fops},
6777 /* Tested by Stefano Bravi */
6778 {USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3308, 0xff, 0xff, 0xff),
6779 .driver_info = (unsigned long)&rtl8192cu_fops},
6780 /* Currently untested 8188 series devices */
6781 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x018a, 0xff, 0xff, 0xff),
6782 .driver_info = (unsigned long)&rtl8192cu_fops},
6783 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8191, 0xff, 0xff, 0xff),
6784 .driver_info = (unsigned long)&rtl8192cu_fops},
6785 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8170, 0xff, 0xff, 0xff),
6786 .driver_info = (unsigned long)&rtl8192cu_fops},
6787 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8177, 0xff, 0xff, 0xff),
6788 .driver_info = (unsigned long)&rtl8192cu_fops},
6789 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817a, 0xff, 0xff, 0xff),
6790 .driver_info = (unsigned long)&rtl8192cu_fops},
6791 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817b, 0xff, 0xff, 0xff),
6792 .driver_info = (unsigned long)&rtl8192cu_fops},
6793 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817d, 0xff, 0xff, 0xff),
6794 .driver_info = (unsigned long)&rtl8192cu_fops},
6795 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817e, 0xff, 0xff, 0xff),
6796 .driver_info = (unsigned long)&rtl8192cu_fops},
6797 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818a, 0xff, 0xff, 0xff),
6798 .driver_info = (unsigned long)&rtl8192cu_fops},
6799 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x317f, 0xff, 0xff, 0xff),
6800 .driver_info = (unsigned long)&rtl8192cu_fops},
6801 {USB_DEVICE_AND_INTERFACE_INFO(0x1058, 0x0631, 0xff, 0xff, 0xff),
6802 .driver_info = (unsigned long)&rtl8192cu_fops},
6803 {USB_DEVICE_AND_INTERFACE_INFO(0x04bb, 0x094c, 0xff, 0xff, 0xff),
6804 .driver_info = (unsigned long)&rtl8192cu_fops},
6805 {USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1102, 0xff, 0xff, 0xff),
6806 .driver_info = (unsigned long)&rtl8192cu_fops},
6807 {USB_DEVICE_AND_INTERFACE_INFO(0x06f8, 0xe033, 0xff, 0xff, 0xff),
6808 .driver_info = (unsigned long)&rtl8192cu_fops},
6809 {USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8189, 0xff, 0xff, 0xff),
6810 .driver_info = (unsigned long)&rtl8192cu_fops},
6811 {USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9041, 0xff, 0xff, 0xff),
6812 .driver_info = (unsigned long)&rtl8192cu_fops},
6813 {USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x17ba, 0xff, 0xff, 0xff),
6814 .driver_info = (unsigned long)&rtl8192cu_fops},
6815 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x1e1e, 0xff, 0xff, 0xff),
6816 .driver_info = (unsigned long)&rtl8192cu_fops},
6817 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x5088, 0xff, 0xff, 0xff),
6818 .driver_info = (unsigned long)&rtl8192cu_fops},
6819 {USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0052, 0xff, 0xff, 0xff),
6820 .driver_info = (unsigned long)&rtl8192cu_fops},
6821 {USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x005c, 0xff, 0xff, 0xff),
6822 .driver_info = (unsigned long)&rtl8192cu_fops},
6823 {USB_DEVICE_AND_INTERFACE_INFO(0x0eb0, 0x9071, 0xff, 0xff, 0xff),
6824 .driver_info = (unsigned long)&rtl8192cu_fops},
6825 {USB_DEVICE_AND_INTERFACE_INFO(0x103c, 0x1629, 0xff, 0xff, 0xff),
6826 .driver_info = (unsigned long)&rtl8192cu_fops},
6827 {USB_DEVICE_AND_INTERFACE_INFO(0x13d3, 0x3357, 0xff, 0xff, 0xff),
6828 .driver_info = (unsigned long)&rtl8192cu_fops},
6829 {USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330b, 0xff, 0xff, 0xff),
6830 .driver_info = (unsigned long)&rtl8192cu_fops},
6831 {USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x4902, 0xff, 0xff, 0xff),
6832 .driver_info = (unsigned long)&rtl8192cu_fops},
6833 {USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2a, 0xff, 0xff, 0xff),
6834 .driver_info = (unsigned long)&rtl8192cu_fops},
6835 {USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2e, 0xff, 0xff, 0xff),
6836 .driver_info = (unsigned long)&rtl8192cu_fops},
6837 {USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xed17, 0xff, 0xff, 0xff),
6838 .driver_info = (unsigned long)&rtl8192cu_fops},
6839 {USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0090, 0xff, 0xff, 0xff),
6840 .driver_info = (unsigned long)&rtl8192cu_fops},
6841 {USB_DEVICE_AND_INTERFACE_INFO(0x4856, 0x0091, 0xff, 0xff, 0xff),
6842 .driver_info = (unsigned long)&rtl8192cu_fops},
6843 {USB_DEVICE_AND_INTERFACE_INFO(0xcdab, 0x8010, 0xff, 0xff, 0xff),
6844 .driver_info = (unsigned long)&rtl8192cu_fops},
6845 {USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff7, 0xff, 0xff, 0xff),
6846 .driver_info = (unsigned long)&rtl8192cu_fops},
6847 {USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff9, 0xff, 0xff, 0xff),
6848 .driver_info = (unsigned long)&rtl8192cu_fops},
6849 {USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffa, 0xff, 0xff, 0xff),
6850 .driver_info = (unsigned long)&rtl8192cu_fops},
6851 {USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff8, 0xff, 0xff, 0xff),
6852 .driver_info = (unsigned long)&rtl8192cu_fops},
6853 {USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffb, 0xff, 0xff, 0xff),
6854 .driver_info = (unsigned long)&rtl8192cu_fops},
6855 {USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffc, 0xff, 0xff, 0xff),
6856 .driver_info = (unsigned long)&rtl8192cu_fops},
6857 {USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x1201, 0xff, 0xff, 0xff),
6858 .driver_info = (unsigned long)&rtl8192cu_fops},
6859 /* Currently untested 8192 series devices */
6860 {USB_DEVICE_AND_INTERFACE_INFO(0x04bb, 0x0950, 0xff, 0xff, 0xff),
6861 .driver_info = (unsigned long)&rtl8192cu_fops},
6862 {USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x2102, 0xff, 0xff, 0xff),
6863 .driver_info = (unsigned long)&rtl8192cu_fops},
6864 {USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x2103, 0xff, 0xff, 0xff),
6865 .driver_info = (unsigned long)&rtl8192cu_fops},
6866 {USB_DEVICE_AND_INTERFACE_INFO(0x0586, 0x341f, 0xff, 0xff, 0xff),
6867 .driver_info = (unsigned long)&rtl8192cu_fops},
6868 {USB_DEVICE_AND_INTERFACE_INFO(0x06f8, 0xe035, 0xff, 0xff, 0xff),
6869 .driver_info = (unsigned long)&rtl8192cu_fops},
6870 {USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x17ab, 0xff, 0xff, 0xff),
6871 .driver_info = (unsigned long)&rtl8192cu_fops},
6872 {USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0061, 0xff, 0xff, 0xff),
6873 .driver_info = (unsigned long)&rtl8192cu_fops},
6874 {USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0070, 0xff, 0xff, 0xff),
6875 .driver_info = (unsigned long)&rtl8192cu_fops},
6876 {USB_DEVICE_AND_INTERFACE_INFO(0x0789, 0x016d, 0xff, 0xff, 0xff),
6877 .driver_info = (unsigned long)&rtl8192cu_fops},
6878 {USB_DEVICE_AND_INTERFACE_INFO(0x07aa, 0x0056, 0xff, 0xff, 0xff),
6879 .driver_info = (unsigned long)&rtl8192cu_fops},
6880 {USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8178, 0xff, 0xff, 0xff),
6881 .driver_info = (unsigned long)&rtl8192cu_fops},
6882 {USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9021, 0xff, 0xff, 0xff),
6883 .driver_info = (unsigned long)&rtl8192cu_fops},
6884 {USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0xf001, 0xff, 0xff, 0xff),
6885 .driver_info = (unsigned long)&rtl8192cu_fops},
6886 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x2e2e, 0xff, 0xff, 0xff),
6887 .driver_info = (unsigned long)&rtl8192cu_fops},
6888 {USB_DEVICE_AND_INTERFACE_INFO(0x0e66, 0x0019, 0xff, 0xff, 0xff),
6889 .driver_info = (unsigned long)&rtl8192cu_fops},
6890 {USB_DEVICE_AND_INTERFACE_INFO(0x0e66, 0x0020, 0xff, 0xff, 0xff),
6891 .driver_info = (unsigned long)&rtl8192cu_fops},
6892 {USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3307, 0xff, 0xff, 0xff),
6893 .driver_info = (unsigned long)&rtl8192cu_fops},
6894 {USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3309, 0xff, 0xff, 0xff),
6895 .driver_info = (unsigned long)&rtl8192cu_fops},
6896 {USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330a, 0xff, 0xff, 0xff),
6897 .driver_info = (unsigned long)&rtl8192cu_fops},
6898 {USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2b, 0xff, 0xff, 0xff),
6899 .driver_info = (unsigned long)&rtl8192cu_fops},
6900 {USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x624d, 0xff, 0xff, 0xff),
6901 .driver_info = (unsigned long)&rtl8192cu_fops},
6902 {USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0100, 0xff, 0xff, 0xff),
6903 .driver_info = (unsigned long)&rtl8192cu_fops},
6904 {USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0091, 0xff, 0xff, 0xff),
6905 .driver_info = (unsigned long)&rtl8192cu_fops},
6906 {USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0x7822, 0xff, 0xff, 0xff),
6907 .driver_info = (unsigned long)&rtl8192cu_fops},
6908 /* found in rtl8192eu vendor driver */
6909 {USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0107, 0xff, 0xff, 0xff),
6910 .driver_info = (unsigned long)&rtl8192eu_fops},
6911 {USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab33, 0xff, 0xff, 0xff),
6912 .driver_info = (unsigned long)&rtl8192eu_fops},
6913 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818c, 0xff, 0xff, 0xff),
6914 .driver_info = (unsigned long)&rtl8192eu_fops},
6915 #endif
6919 static struct usb_driver rtl8xxxu_driver = {
6920 .name = DRIVER_NAME,
6921 .probe = rtl8xxxu_probe,
6922 .disconnect = rtl8xxxu_disconnect,
6923 .id_table = dev_table,
6924 .no_dynamic_id = 1,
6925 .disable_hub_initiated_lpm = 1,
6928 static int __init rtl8xxxu_module_init(void)
6930 int res;
6932 res = usb_register(&rtl8xxxu_driver);
6933 if (res < 0)
6934 pr_err(DRIVER_NAME ": usb_register() failed (%i)\n", res);
6936 return res;
6939 static void __exit rtl8xxxu_module_exit(void)
6941 usb_deregister(&rtl8xxxu_driver);
6945 MODULE_DEVICE_TABLE(usb, dev_table);
6947 module_init(rtl8xxxu_module_init);
6948 module_exit(rtl8xxxu_module_exit);