drivers/regulator/lp8788-buck.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * TI LP8788 MFD - buck regulator driver
   4  *
   5  * Copyright 2012 Texas Instruments
   6  *
   7  * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
   8  */
   9
  10 #include <linux/module.h>
  11 #include <linux/slab.h>
  12 #include <linux/err.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/regulator/driver.h>
  15 #include <linux/mfd/lp8788.h>
  16 #include <linux/gpio.h>
  17
  18 /* register address */
  19 #define LP8788_EN_BUCK                  0x0C
  20 #define LP8788_BUCK_DVS_SEL             0x1D
  21 #define LP8788_BUCK1_VOUT0              0x1E
  22 #define LP8788_BUCK1_VOUT1              0x1F
  23 #define LP8788_BUCK1_VOUT2              0x20
  24 #define LP8788_BUCK1_VOUT3              0x21
  25 #define LP8788_BUCK2_VOUT0              0x22
  26 #define LP8788_BUCK2_VOUT1              0x23
  27 #define LP8788_BUCK2_VOUT2              0x24
  28 #define LP8788_BUCK2_VOUT3              0x25
  29 #define LP8788_BUCK3_VOUT               0x26
  30 #define LP8788_BUCK4_VOUT               0x27
  31 #define LP8788_BUCK1_TIMESTEP           0x28
  32 #define LP8788_BUCK_PWM                 0x2D
  33
  34 /* mask/shift bits */
  35 #define LP8788_EN_BUCK1_M               BIT(0)  /* Addr 0Ch */
  36 #define LP8788_EN_BUCK2_M               BIT(1)
  37 #define LP8788_EN_BUCK3_M               BIT(2)
  38 #define LP8788_EN_BUCK4_M               BIT(3)
  39 #define LP8788_BUCK1_DVS_SEL_M          0x04    /* Addr 1Dh */
  40 #define LP8788_BUCK1_DVS_M              0x03
  41 #define LP8788_BUCK1_DVS_S              0
  42 #define LP8788_BUCK2_DVS_SEL_M          0x40
  43 #define LP8788_BUCK2_DVS_M              0x30
  44 #define LP8788_BUCK2_DVS_S              4
  45 #define LP8788_BUCK1_DVS_I2C            BIT(2)
  46 #define LP8788_BUCK2_DVS_I2C            BIT(6)
  47 #define LP8788_BUCK1_DVS_PIN            (0 << 2)
  48 #define LP8788_BUCK2_DVS_PIN            (0 << 6)
  49 #define LP8788_VOUT_M                   0x1F    /* Addr 1Eh ~ 27h */
  50 #define LP8788_STARTUP_TIME_M           0xF8    /* Addr 28h ~ 2Bh */
  51 #define LP8788_STARTUP_TIME_S           3
  52 #define LP8788_FPWM_BUCK1_M             BIT(0)  /* Addr 2Dh */
  53 #define LP8788_FPWM_BUCK1_S             0
  54 #define LP8788_FPWM_BUCK2_M             BIT(1)
  55 #define LP8788_FPWM_BUCK2_S             1
  56 #define LP8788_FPWM_BUCK3_M             BIT(2)
  57 #define LP8788_FPWM_BUCK3_S             2
  58 #define LP8788_FPWM_BUCK4_M             BIT(3)
  59 #define LP8788_FPWM_BUCK4_S             3
  60
  61 #define INVALID_ADDR                    0xFF
  62 #define LP8788_FORCE_PWM                1
  63 #define LP8788_AUTO_PWM                 0
  64 #define PIN_LOW                         0
  65 #define PIN_HIGH                        1
  66 #define ENABLE_TIME_USEC                32
  67
  68 #define BUCK_FPWM_MASK(x)               (1 << (x))
  69 #define BUCK_FPWM_SHIFT(x)              (x)
  70
  71 enum lp8788_dvs_state {
  72         DVS_LOW  = GPIOF_OUT_INIT_LOW,
  73         DVS_HIGH = GPIOF_OUT_INIT_HIGH,
  74 };
  75
  76 enum lp8788_dvs_mode {
  77         REGISTER,
  78         EXTPIN,
  79 };
  80
  81 enum lp8788_buck_id {
  82         BUCK1,
  83         BUCK2,
  84         BUCK3,
  85         BUCK4,
  86 };
  87
  88 struct lp8788_buck {
  89         struct lp8788 *lp;
  90         struct regulator_dev *regulator;
  91         void *dvs;
  92 };
  93
  94 /* BUCK 1 ~ 4 voltage ranges */
  95 static const struct regulator_linear_range buck_volt_ranges[] = {
  96         REGULATOR_LINEAR_RANGE(500000, 0, 0, 0),
  97         REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000),
  98 };
  99
 100 static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
 101 {
 102         struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs;
 103         enum lp8788_dvs_state pinstate;
 104
 105         if (!dvs)
 106                 return;
 107
 108         pinstate = dvs->vsel == DVS_SEL_V0 ? DVS_LOW : DVS_HIGH;
 109         if (gpio_is_valid(dvs->gpio))
 110                 gpio_set_value(dvs->gpio, pinstate);
 111 }
 112
 113 static void lp8788_buck2_set_dvs(struct lp8788_buck *buck)
 114 {
 115         struct lp8788_buck2_dvs *dvs = (struct lp8788_buck2_dvs *)buck->dvs;
 116         enum lp8788_dvs_state pin1, pin2;
 117
 118         if (!dvs)
 119                 return;
 120
 121         switch (dvs->vsel) {
 122         case DVS_SEL_V0:
 123                 pin1 = DVS_LOW;
 124                 pin2 = DVS_LOW;
 125                 break;
 126         case DVS_SEL_V1:
 127                 pin1 = DVS_HIGH;
 128                 pin2 = DVS_LOW;
 129                 break;
 130         case DVS_SEL_V2:
 131                 pin1 = DVS_LOW;
 132                 pin2 = DVS_HIGH;
 133                 break;
 134         case DVS_SEL_V3:
 135                 pin1 = DVS_HIGH;
 136                 pin2 = DVS_HIGH;
 137                 break;
 138         default:
 139                 return;
 140         }
 141
 142         if (gpio_is_valid(dvs->gpio[0]))
 143                 gpio_set_value(dvs->gpio[0], pin1);
 144
 145         if (gpio_is_valid(dvs->gpio[1]))
 146                 gpio_set_value(dvs->gpio[1], pin2);
 147 }
 148
 149 static void lp8788_set_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
 150 {
 151         switch (id) {
 152         case BUCK1:
 153                 lp8788_buck1_set_dvs(buck);
 154                 break;
 155         case BUCK2:
 156                 lp8788_buck2_set_dvs(buck);
 157                 break;
 158         default:
 159                 break;
 160         }
 161 }
 162
 163 static enum lp8788_dvs_mode
 164 lp8788_get_buck_dvs_ctrl_mode(struct lp8788_buck *buck, enum lp8788_buck_id id)
 165 {
 166         u8 val, mask;
 167
 168         switch (id) {
 169         case BUCK1:
 170                 mask = LP8788_BUCK1_DVS_SEL_M;
 171                 break;
 172         case BUCK2:
 173                 mask = LP8788_BUCK2_DVS_SEL_M;
 174                 break;
 175         default:
 176                 return REGISTER;
 177         }
 178
 179         lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
 180
 181         return val & mask ? REGISTER : EXTPIN;
 182 }
 183
 184 static bool lp8788_is_valid_buck_addr(u8 addr)
 185 {
 186         switch (addr) {
 187         case LP8788_BUCK1_VOUT0:
 188         case LP8788_BUCK1_VOUT1:
 189         case LP8788_BUCK1_VOUT2:
 190         case LP8788_BUCK1_VOUT3:
 191         case LP8788_BUCK2_VOUT0:
 192         case LP8788_BUCK2_VOUT1:
 193         case LP8788_BUCK2_VOUT2:
 194         case LP8788_BUCK2_VOUT3:
 195                 return true;
 196         default:
 197                 return false;
 198         }
 199 }
 200
 201 static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck,
 202                                         enum lp8788_buck_id id)
 203 {
 204         enum lp8788_dvs_mode mode = lp8788_get_buck_dvs_ctrl_mode(buck, id);
 205         struct lp8788_buck1_dvs *b1_dvs;
 206         struct lp8788_buck2_dvs *b2_dvs;
 207         u8 val, idx, addr;
 208         int pin1, pin2;
 209
 210         switch (id) {
 211         case BUCK1:
 212                 if (mode == EXTPIN) {
 213                         b1_dvs = (struct lp8788_buck1_dvs *)buck->dvs;
 214                         if (!b1_dvs)
 215                                 goto err;
 216
 217                         idx = gpio_get_value(b1_dvs->gpio) ? 1 : 0;
 218                 } else {
 219                         lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
 220                         idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S;
 221                 }
 222                 addr = LP8788_BUCK1_VOUT0 + idx;
 223                 break;
 224         case BUCK2:
 225                 if (mode == EXTPIN) {
 226                         b2_dvs = (struct lp8788_buck2_dvs *)buck->dvs;
 227                         if (!b2_dvs)
 228                                 goto err;
 229
 230                         pin1 = gpio_get_value(b2_dvs->gpio[0]);
 231                         pin2 = gpio_get_value(b2_dvs->gpio[1]);
 232
 233                         if (pin1 == PIN_LOW && pin2 == PIN_LOW)
 234                                 idx = 0;
 235                         else if (pin1 == PIN_LOW && pin2 == PIN_HIGH)
 236                                 idx = 2;
 237                         else if (pin1 == PIN_HIGH && pin2 == PIN_LOW)
 238                                 idx = 1;
 239                         else
 240                                 idx = 3;
 241                 } else {
 242                         lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
 243                         idx = (val & LP8788_BUCK2_DVS_M) >> LP8788_BUCK2_DVS_S;
 244                 }
 245                 addr = LP8788_BUCK2_VOUT0 + idx;
 246                 break;
 247         default:
 248                 goto err;
 249         }
 250
 251         return addr;
 252 err:
 253         return INVALID_ADDR;
 254 }
 255
 256 static int lp8788_buck12_set_voltage_sel(struct regulator_dev *rdev,
 257                                         unsigned selector)
 258 {
 259         struct lp8788_buck *buck = rdev_get_drvdata(rdev);
 260         enum lp8788_buck_id id = rdev_get_id(rdev);
 261         u8 addr;
 262
 263         if (buck->dvs)
 264                 lp8788_set_dvs(buck, id);
 265
 266         addr = lp8788_select_buck_vout_addr(buck, id);
 267         if (!lp8788_is_valid_buck_addr(addr))
 268                 return -EINVAL;
 269
 270         return lp8788_update_bits(buck->lp, addr, LP8788_VOUT_M, selector);
 271 }
 272
 273 static int lp8788_buck12_get_voltage_sel(struct regulator_dev *rdev)
 274 {
 275         struct lp8788_buck *buck = rdev_get_drvdata(rdev);
 276         enum lp8788_buck_id id = rdev_get_id(rdev);
 277         int ret;
 278         u8 val, addr;
 279
 280         addr = lp8788_select_buck_vout_addr(buck, id);
 281         if (!lp8788_is_valid_buck_addr(addr))
 282                 return -EINVAL;
 283
 284         ret = lp8788_read_byte(buck->lp, addr, &val);
 285         if (ret)
 286                 return ret;
 287
 288         return val & LP8788_VOUT_M;
 289 }
 290
 291 static int lp8788_buck_enable_time(struct regulator_dev *rdev)
 292 {
 293         struct lp8788_buck *buck = rdev_get_drvdata(rdev);
 294         enum lp8788_buck_id id = rdev_get_id(rdev);
 295         u8 val, addr = LP8788_BUCK1_TIMESTEP + id;
 296
 297         if (lp8788_read_byte(buck->lp, addr, &val))
 298                 return -EINVAL;
 299
 300         val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S;
 301
 302         return ENABLE_TIME_USEC * val;
 303 }
 304
 305 static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
 306 {
 307         struct lp8788_buck *buck = rdev_get_drvdata(rdev);
 308         enum lp8788_buck_id id = rdev_get_id(rdev);
 309         u8 mask, val;
 310
 311         mask = BUCK_FPWM_MASK(id);
 312         switch (mode) {
 313         case REGULATOR_MODE_FAST:
 314                 val = LP8788_FORCE_PWM << BUCK_FPWM_SHIFT(id);
 315                 break;
 316         case REGULATOR_MODE_NORMAL:
 317                 val = LP8788_AUTO_PWM << BUCK_FPWM_SHIFT(id);
 318                 break;
 319         default:
 320                 return -EINVAL;
 321         }
 322
 323         return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, mask, val);
 324 }
 325
 326 static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
 327 {
 328         struct lp8788_buck *buck = rdev_get_drvdata(rdev);
 329         enum lp8788_buck_id id = rdev_get_id(rdev);
 330         u8 val;
 331         int ret;
 332
 333         ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val);
 334         if (ret)
 335                 return ret;
 336
 337         return val & BUCK_FPWM_MASK(id) ?
 338                                 REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
 339 }
 340
 341 static const struct regulator_ops lp8788_buck12_ops = {
 342         .list_voltage = regulator_list_voltage_linear_range,
 343         .map_voltage = regulator_map_voltage_linear_range,
 344         .set_voltage_sel = lp8788_buck12_set_voltage_sel,
 345         .get_voltage_sel = lp8788_buck12_get_voltage_sel,
 346         .enable = regulator_enable_regmap,
 347         .disable = regulator_disable_regmap,
 348         .is_enabled = regulator_is_enabled_regmap,
 349         .enable_time = lp8788_buck_enable_time,
 350         .set_mode = lp8788_buck_set_mode,
 351         .get_mode = lp8788_buck_get_mode,
 352 };
 353
 354 static const struct regulator_ops lp8788_buck34_ops = {
 355         .list_voltage = regulator_list_voltage_linear_range,
 356         .map_voltage = regulator_map_voltage_linear_range,
 357         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 358         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 359         .enable = regulator_enable_regmap,
 360         .disable = regulator_disable_regmap,
 361         .is_enabled = regulator_is_enabled_regmap,
 362         .enable_time = lp8788_buck_enable_time,
 363         .set_mode = lp8788_buck_set_mode,
 364         .get_mode = lp8788_buck_get_mode,
 365 };
 366
 367 static const struct regulator_desc lp8788_buck_desc[] = {
 368         {
 369                 .name = "buck1",
 370                 .id = BUCK1,
 371                 .ops = &lp8788_buck12_ops,
 372                 .n_voltages = 26,
 373                 .linear_ranges = buck_volt_ranges,
 374                 .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
 375                 .type = REGULATOR_VOLTAGE,
 376                 .owner = THIS_MODULE,
 377                 .enable_reg = LP8788_EN_BUCK,
 378                 .enable_mask = LP8788_EN_BUCK1_M,
 379         },
 380         {
 381                 .name = "buck2",
 382                 .id = BUCK2,
 383                 .ops = &lp8788_buck12_ops,
 384                 .n_voltages = 26,
 385                 .linear_ranges = buck_volt_ranges,
 386                 .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
 387                 .type = REGULATOR_VOLTAGE,
 388                 .owner = THIS_MODULE,
 389                 .enable_reg = LP8788_EN_BUCK,
 390                 .enable_mask = LP8788_EN_BUCK2_M,
 391         },
 392         {
 393                 .name = "buck3",
 394                 .id = BUCK3,
 395                 .ops = &lp8788_buck34_ops,
 396                 .n_voltages = 26,
 397                 .linear_ranges = buck_volt_ranges,
 398                 .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
 399                 .type = REGULATOR_VOLTAGE,
 400                 .owner = THIS_MODULE,
 401                 .vsel_reg = LP8788_BUCK3_VOUT,
 402                 .vsel_mask = LP8788_VOUT_M,
 403                 .enable_reg = LP8788_EN_BUCK,
 404                 .enable_mask = LP8788_EN_BUCK3_M,
 405         },
 406         {
 407                 .name = "buck4",
 408                 .id = BUCK4,
 409                 .ops = &lp8788_buck34_ops,
 410                 .n_voltages = 26,
 411                 .linear_ranges = buck_volt_ranges,
 412                 .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
 413                 .type = REGULATOR_VOLTAGE,
 414                 .owner = THIS_MODULE,
 415                 .vsel_reg = LP8788_BUCK4_VOUT,
 416                 .vsel_mask = LP8788_VOUT_M,
 417                 .enable_reg = LP8788_EN_BUCK,
 418                 .enable_mask = LP8788_EN_BUCK4_M,
 419         },
 420 };
 421
 422 static int lp8788_dvs_gpio_request(struct platform_device *pdev,
 423                                 struct lp8788_buck *buck,
 424                                 enum lp8788_buck_id id)
 425 {
 426         struct lp8788_platform_data *pdata = buck->lp->pdata;
 427         char *b1_name = "LP8788_B1_DVS";
 428         char *b2_name[] = { "LP8788_B2_DVS1", "LP8788_B2_DVS2" };
 429         int i, gpio, ret;
 430
 431         switch (id) {
 432         case BUCK1:
 433                 gpio = pdata->buck1_dvs->gpio;
 434                 ret = devm_gpio_request_one(&pdev->dev, gpio, DVS_LOW,
 435                                             b1_name);
 436                 if (ret)
 437                         return ret;
 438
 439                 buck->dvs = pdata->buck1_dvs;
 440                 break;
 441         case BUCK2:
 442                 for (i = 0; i < LP8788_NUM_BUCK2_DVS; i++) {
 443                         gpio = pdata->buck2_dvs->gpio[i];
 444                         ret = devm_gpio_request_one(&pdev->dev, gpio,
 445                                                     DVS_LOW, b2_name[i]);
 446                         if (ret)
 447                                 return ret;
 448                 }
 449                 buck->dvs = pdata->buck2_dvs;
 450                 break;
 451         default:
 452                 break;
 453         }
 454
 455         return 0;
 456 }
 457
 458 static int lp8788_init_dvs(struct platform_device *pdev,
 459                         struct lp8788_buck *buck, enum lp8788_buck_id id)
 460 {
 461         struct lp8788_platform_data *pdata = buck->lp->pdata;
 462         u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M };
 463         u8 val[]  = { LP8788_BUCK1_DVS_PIN, LP8788_BUCK2_DVS_PIN };
 464         u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C };
 465
 466         /* no dvs for buck3, 4 */
 467         if (id > BUCK2)
 468                 return 0;
 469
 470         /* no dvs platform data, then dvs will be selected by I2C registers */
 471         if (!pdata)
 472                 goto set_default_dvs_mode;
 473
 474         if ((id == BUCK1 && !pdata->buck1_dvs) ||
 475                 (id == BUCK2 && !pdata->buck2_dvs))
 476                 goto set_default_dvs_mode;
 477
 478         if (lp8788_dvs_gpio_request(pdev, buck, id))
 479                 goto set_default_dvs_mode;
 480
 481         return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
 482                                 val[id]);
 483
 484 set_default_dvs_mode:
 485         return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
 486                                   default_dvs_mode[id]);
 487 }
 488
 489 static int lp8788_buck_probe(struct platform_device *pdev)
 490 {
 491         struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
 492         int id = pdev->id;
 493         struct lp8788_buck *buck;
 494         struct regulator_config cfg = { };
 495         struct regulator_dev *rdev;
 496         int ret;
 497
 498         if (id >= LP8788_NUM_BUCKS)
 499                 return -EINVAL;
 500
 501         buck = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_buck), GFP_KERNEL);
 502         if (!buck)
 503                 return -ENOMEM;
 504
 505         buck->lp = lp;
 506
 507         ret = lp8788_init_dvs(pdev, buck, id);
 508         if (ret)
 509                 return ret;
 510
 511         cfg.dev = pdev->dev.parent;
 512         cfg.init_data = lp->pdata ? lp->pdata->buck_data[id] : NULL;
 513         cfg.driver_data = buck;
 514         cfg.regmap = lp->regmap;
 515
 516         rdev = devm_regulator_register(&pdev->dev, &lp8788_buck_desc[id], &cfg);
 517         if (IS_ERR(rdev)) {
 518                 ret = PTR_ERR(rdev);
 519                 dev_err(&pdev->dev, "BUCK%d regulator register err = %d\n",
 520                                 id + 1, ret);
 521                 return ret;
 522         }
 523
 524         buck->regulator = rdev;
 525         platform_set_drvdata(pdev, buck);
 526
 527         return 0;
 528 }
 529
 530 static struct platform_driver lp8788_buck_driver = {
 531         .probe = lp8788_buck_probe,
 532         .driver = {
 533                 .name = LP8788_DEV_BUCK,
 534         },
 535 };
 536
 537 static int __init lp8788_buck_init(void)
 538 {
 539         return platform_driver_register(&lp8788_buck_driver);
 540 }
 541 subsys_initcall(lp8788_buck_init);
 542
 543 static void __exit lp8788_buck_exit(void)
 544 {
 545         platform_driver_unregister(&lp8788_buck_driver);
 546 }
 547 module_exit(lp8788_buck_exit);
 548
 549 MODULE_DESCRIPTION("TI LP8788 BUCK Driver");
 550 MODULE_AUTHOR("Milo Kim");
 551 MODULE_LICENSE("GPL");
 552 MODULE_ALIAS("platform:lp8788-buck");