?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
mic: vop: Fix use-after-free on remove
[linux/fpc-iii.git] / drivers / scsi / BusLogic.c
blobe41e51f1da71af1a33d5217b76d5dcc930fd3dad
1
2 /*
3
4 Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
5
6 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
7
8 This program is free software; you may redistribute and/or modify it under
9 the terms of the GNU General Public License Version 2 as published by the
10 Free Software Foundation.
11
12 This program is distributed in the hope that it will be useful, but
13 WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
14 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
15 for complete details.
16
17 The author respectfully requests that any modifications to this software be
18 sent directly to him for evaluation and testing.
19
20 Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
21 advice has been invaluable, to David Gentzel, for writing the original Linux
22 BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
23
24 Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
25 Manager available as freely redistributable source code.
26
27 */
28
29 #define blogic_drvr_version "2.1.17"
30 #define blogic_drvr_date "12 September 2013"
31
32 #include <linux/module.h>
33 #include <linux/init.h>
34 #include <linux/interrupt.h>
35 #include <linux/types.h>
36 #include <linux/blkdev.h>
37 #include <linux/delay.h>
38 #include <linux/ioport.h>
39 #include <linux/mm.h>
40 #include <linux/stat.h>
41 #include <linux/pci.h>
42 #include <linux/spinlock.h>
43 #include <linux/jiffies.h>
44 #include <linux/dma-mapping.h>
45 #include <linux/slab.h>
46 #include <scsi/scsicam.h>
47
48 #include <asm/dma.h>
49 #include <asm/io.h>
50
51 #include <scsi/scsi.h>
52 #include <scsi/scsi_cmnd.h>
53 #include <scsi/scsi_device.h>
54 #include <scsi/scsi_host.h>
55 #include <scsi/scsi_tcq.h>
56 #include "BusLogic.h"
57 #include "FlashPoint.c"
58
59 #ifndef FAILURE
60 #define FAILURE (-1)
61 #endif
62
63 static struct scsi_host_template blogic_template;
64
65 /*
66 blogic_drvr_options_count is a count of the number of BusLogic Driver
67 Options specifications provided via the Linux Kernel Command Line or via
68 the Loadable Kernel Module Installation Facility.
69 */
70
71 static int blogic_drvr_options_count;
72
73
74 /*
75 blogic_drvr_options is an array of Driver Options structures representing
76 BusLogic Driver Options specifications provided via the Linux Kernel Command
77 Line or via the Loadable Kernel Module Installation Facility.
78 */
79
80 static struct blogic_drvr_options blogic_drvr_options[BLOGIC_MAX_ADAPTERS];
81
82
83 /*
84 BusLogic can be assigned a string by insmod.
85 */
86
87 MODULE_LICENSE("GPL");
88 #ifdef MODULE
89 static char *BusLogic;
90 module_param(BusLogic, charp, 0);
91 #endif
92
93
94 /*
95 blogic_probe_options is a set of Probe Options to be applied across
96 all BusLogic Host Adapters.
97 */
98
99 static struct blogic_probe_options blogic_probe_options;
100
101
102 /*
103 blogic_global_options is a set of Global Options to be applied across
104 all BusLogic Host Adapters.
105 */
106
107 static struct blogic_global_options blogic_global_options;
108
109 static LIST_HEAD(blogic_host_list);
110
111 /*
112 blogic_probeinfo_count is the number of entries in blogic_probeinfo_list.
113 */
114
115 static int blogic_probeinfo_count;
116
117
118 /*
119 blogic_probeinfo_list is the list of I/O Addresses and Bus Probe Information
120 to be checked for potential BusLogic Host Adapters. It is initialized by
121 interrogating the PCI Configuration Space on PCI machines as well as from the
122 list of standard BusLogic I/O Addresses.
123 */
124
125 static struct blogic_probeinfo *blogic_probeinfo_list;
126
127
128 /*
129 blogic_cmd_failure_reason holds a string identifying the reason why a
130 call to blogic_cmd failed. It is only non-NULL when blogic_cmd
131 returns a failure code.
132 */
133
134 static char *blogic_cmd_failure_reason;
135
136 /*
137 blogic_announce_drvr announces the Driver Version and Date, Author's
138 Name, Copyright Notice, and Electronic Mail Address.
139 */
140
141 static void blogic_announce_drvr(struct blogic_adapter *adapter)
142 {
143 blogic_announce("***** BusLogic SCSI Driver Version " blogic_drvr_version " of " blogic_drvr_date " *****\n", adapter);
144 blogic_announce("Copyright 1995-1998 by Leonard N. Zubkoff " "<lnz@dandelion.com>\n", adapter);
145 }
146
147
148 /*
149 blogic_drvr_info returns the Host Adapter Name to identify this SCSI
150 Driver and Host Adapter.
151 */
152
153 static const char *blogic_drvr_info(struct Scsi_Host *host)
154 {
155 struct blogic_adapter *adapter =
156 (struct blogic_adapter *) host->hostdata;
157 return adapter->full_model;
158 }
159
160 /*
161 blogic_init_ccbs initializes a group of Command Control Blocks (CCBs)
162 for Host Adapter from the blk_size bytes located at blk_pointer. The newly
163 created CCBs are added to Host Adapter's free list.
164 */
165
166 static void blogic_init_ccbs(struct blogic_adapter *adapter, void *blk_pointer,
167 int blk_size, dma_addr_t blkp)
168 {
169 struct blogic_ccb *ccb = (struct blogic_ccb *) blk_pointer;
170 unsigned int offset = 0;
171 memset(blk_pointer, 0, blk_size);
172 ccb->allocgrp_head = blkp;
173 ccb->allocgrp_size = blk_size;
174 while ((blk_size -= sizeof(struct blogic_ccb)) >= 0) {
175 ccb->status = BLOGIC_CCB_FREE;
176 ccb->adapter = adapter;
177 ccb->dma_handle = (u32) blkp + offset;
178 if (blogic_flashpoint_type(adapter)) {
179 ccb->callback = blogic_qcompleted_ccb;
180 ccb->base_addr = adapter->fpinfo.base_addr;
181 }
182 ccb->next = adapter->free_ccbs;
183 ccb->next_all = adapter->all_ccbs;
184 adapter->free_ccbs = ccb;
185 adapter->all_ccbs = ccb;
186 adapter->alloc_ccbs++;
187 ccb++;
188 offset += sizeof(struct blogic_ccb);
189 }
190 }
191
192
193 /*
194 blogic_create_initccbs allocates the initial CCBs for Host Adapter.
195 */
196
197 static bool __init blogic_create_initccbs(struct blogic_adapter *adapter)
198 {
199 int blk_size = BLOGIC_CCB_GRP_ALLOCSIZE * sizeof(struct blogic_ccb);
200 void *blk_pointer;
201 dma_addr_t blkp;
202
203 while (adapter->alloc_ccbs < adapter->initccbs) {
204 blk_pointer = dma_alloc_coherent(&adapter->pci_device->dev,
205 blk_size, &blkp, GFP_KERNEL);
206 if (blk_pointer == NULL) {
207 blogic_err("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n",
208 adapter);
209 return false;
210 }
211 blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp);
212 }
213 return true;
214 }
215
216
217 /*
218 blogic_destroy_ccbs deallocates the CCBs for Host Adapter.
219 */
220
221 static void blogic_destroy_ccbs(struct blogic_adapter *adapter)
222 {
223 struct blogic_ccb *next_ccb = adapter->all_ccbs, *ccb, *lastccb = NULL;
224 adapter->all_ccbs = NULL;
225 adapter->free_ccbs = NULL;
226 while ((ccb = next_ccb) != NULL) {
227 next_ccb = ccb->next_all;
228 if (ccb->allocgrp_head) {
229 if (lastccb)
230 dma_free_coherent(&adapter->pci_device->dev,
231 lastccb->allocgrp_size, lastccb,
232 lastccb->allocgrp_head);
233 lastccb = ccb;
234 }
235 }
236 if (lastccb)
237 dma_free_coherent(&adapter->pci_device->dev,
238 lastccb->allocgrp_size, lastccb,
239 lastccb->allocgrp_head);
240 }
241
242
243 /*
244 blogic_create_addlccbs allocates Additional CCBs for Host Adapter. If
245 allocation fails and there are no remaining CCBs available, the Driver Queue
246 Depth is decreased to a known safe value to avoid potential deadlocks when
247 multiple host adapters share the same IRQ Channel.
248 */
249
250 static void blogic_create_addlccbs(struct blogic_adapter *adapter,
251 int addl_ccbs, bool print_success)
252 {
253 int blk_size = BLOGIC_CCB_GRP_ALLOCSIZE * sizeof(struct blogic_ccb);
254 int prev_alloc = adapter->alloc_ccbs;
255 void *blk_pointer;
256 dma_addr_t blkp;
257 if (addl_ccbs <= 0)
258 return;
259 while (adapter->alloc_ccbs - prev_alloc < addl_ccbs) {
260 blk_pointer = dma_alloc_coherent(&adapter->pci_device->dev,
261 blk_size, &blkp, GFP_KERNEL);
262 if (blk_pointer == NULL)
263 break;
264 blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp);
265 }
266 if (adapter->alloc_ccbs > prev_alloc) {
267 if (print_success)
268 blogic_notice("Allocated %d additional CCBs (total now %d)\n", adapter, adapter->alloc_ccbs - prev_alloc, adapter->alloc_ccbs);
269 return;
270 }
271 blogic_notice("Failed to allocate additional CCBs\n", adapter);
272 if (adapter->drvr_qdepth > adapter->alloc_ccbs - adapter->tgt_count) {
273 adapter->drvr_qdepth = adapter->alloc_ccbs - adapter->tgt_count;
274 adapter->scsi_host->can_queue = adapter->drvr_qdepth;
275 }
276 }
277
278 /*
279 blogic_alloc_ccb allocates a CCB from Host Adapter's free list,
280 allocating more memory from the Kernel if necessary. The Host Adapter's
281 Lock should already have been acquired by the caller.
282 */
283
284 static struct blogic_ccb *blogic_alloc_ccb(struct blogic_adapter *adapter)
285 {
286 static unsigned long serial;
287 struct blogic_ccb *ccb;
288 ccb = adapter->free_ccbs;
289 if (ccb != NULL) {
290 ccb->serial = ++serial;
291 adapter->free_ccbs = ccb->next;
292 ccb->next = NULL;
293 if (adapter->free_ccbs == NULL)
294 blogic_create_addlccbs(adapter, adapter->inc_ccbs,
295 true);
296 return ccb;
297 }
298 blogic_create_addlccbs(adapter, adapter->inc_ccbs, true);
299 ccb = adapter->free_ccbs;
300 if (ccb == NULL)
301 return NULL;
302 ccb->serial = ++serial;
303 adapter->free_ccbs = ccb->next;
304 ccb->next = NULL;
305 return ccb;
306 }
307
308
309 /*
310 blogic_dealloc_ccb deallocates a CCB, returning it to the Host Adapter's
311 free list. The Host Adapter's Lock should already have been acquired by the
312 caller.
313 */
314
315 static void blogic_dealloc_ccb(struct blogic_ccb *ccb, int dma_unmap)
316 {
317 struct blogic_adapter *adapter = ccb->adapter;
318
319 if (ccb->command != NULL)
320 scsi_dma_unmap(ccb->command);
321 if (dma_unmap)
322 dma_unmap_single(&adapter->pci_device->dev, ccb->sensedata,
323 ccb->sense_datalen, DMA_FROM_DEVICE);
324
325 ccb->command = NULL;
326 ccb->status = BLOGIC_CCB_FREE;
327 ccb->next = adapter->free_ccbs;
328 adapter->free_ccbs = ccb;
329 }
330
331
332 /*
333 blogic_cmd sends the command opcode to adapter, optionally
334 providing paramlen bytes of param and receiving at most
335 replylen bytes of reply; any excess reply data is received but
336 discarded.
337
338 On success, this function returns the number of reply bytes read from
339 the Host Adapter (including any discarded data); on failure, it returns
340 -1 if the command was invalid, or -2 if a timeout occurred.
341
342 blogic_cmd is called exclusively during host adapter detection and
343 initialization, so performance and latency are not critical, and exclusive
344 access to the Host Adapter hardware is assumed. Once the host adapter and
345 driver are initialized, the only Host Adapter command that is issued is the
346 single byte Execute Mailbox Command operation code, which does not require
347 waiting for the Host Adapter Ready bit to be set in the Status Register.
348 */
349
350 static int blogic_cmd(struct blogic_adapter *adapter, enum blogic_opcode opcode,
351 void *param, int paramlen, void *reply, int replylen)
352 {
353 unsigned char *param_p = (unsigned char *) param;
354 unsigned char *reply_p = (unsigned char *) reply;
355 union blogic_stat_reg statusreg;
356 union blogic_int_reg intreg;
357 unsigned long processor_flag = 0;
358 int reply_b = 0, result;
359 long timeout;
360 /*
361 Clear out the Reply Data if provided.
362 */
363 if (replylen > 0)
364 memset(reply, 0, replylen);
365 /*
366 If the IRQ Channel has not yet been acquired, then interrupts
367 must be disabled while issuing host adapter commands since a
368 Command Complete interrupt could occur if the IRQ Channel was
369 previously enabled by another BusLogic Host Adapter or another
370 driver sharing the same IRQ Channel.
371 */
372 if (!adapter->irq_acquired)
373 local_irq_save(processor_flag);
374 /*
375 Wait for the Host Adapter Ready bit to be set and the
376 Command/Parameter Register Busy bit to be reset in the Status
377 Register.
378 */
379 timeout = 10000;
380 while (--timeout >= 0) {
381 statusreg.all = blogic_rdstatus(adapter);
382 if (statusreg.sr.adapter_ready && !statusreg.sr.cmd_param_busy)
383 break;
384 udelay(100);
385 }
386 if (timeout < 0) {
387 blogic_cmd_failure_reason =
388 "Timeout waiting for Host Adapter Ready";
389 result = -2;
390 goto done;
391 }
392 /*
393 Write the opcode to the Command/Parameter Register.
394 */
395 adapter->adapter_cmd_complete = false;
396 blogic_setcmdparam(adapter, opcode);
397 /*
398 Write any additional Parameter Bytes.
399 */
400 timeout = 10000;
401 while (paramlen > 0 && --timeout >= 0) {
402 /*
403 Wait 100 microseconds to give the Host Adapter enough
404 time to determine whether the last value written to the
405 Command/Parameter Register was valid or not. If the
406 Command Complete bit is set in the Interrupt Register,
407 then the Command Invalid bit in the Status Register will
408 be reset if the Operation Code or Parameter was valid
409 and the command has completed, or set if the Operation
410 Code or Parameter was invalid. If the Data In Register
411 Ready bit is set in the Status Register, then the
412 Operation Code was valid, and data is waiting to be read
413 back from the Host Adapter. Otherwise, wait for the
414 Command/Parameter Register Busy bit in the Status
415 Register to be reset.
416 */
417 udelay(100);
418 intreg.all = blogic_rdint(adapter);
419 statusreg.all = blogic_rdstatus(adapter);
420 if (intreg.ir.cmd_complete)
421 break;
422 if (adapter->adapter_cmd_complete)
423 break;
424 if (statusreg.sr.datain_ready)
425 break;
426 if (statusreg.sr.cmd_param_busy)
427 continue;
428 blogic_setcmdparam(adapter, *param_p++);
429 paramlen--;
430 }
431 if (timeout < 0) {
432 blogic_cmd_failure_reason =
433 "Timeout waiting for Parameter Acceptance";
434 result = -2;
435 goto done;
436 }
437 /*
438 The Modify I/O Address command does not cause a Command Complete
439 Interrupt.
440 */
441 if (opcode == BLOGIC_MOD_IOADDR) {
442 statusreg.all = blogic_rdstatus(adapter);
443 if (statusreg.sr.cmd_invalid) {
444 blogic_cmd_failure_reason =
445 "Modify I/O Address Invalid";
446 result = -1;
447 goto done;
448 }
449 if (blogic_global_options.trace_config)
450 blogic_notice("blogic_cmd(%02X) Status = %02X: " "(Modify I/O Address)\n", adapter, opcode, statusreg.all);
451 result = 0;
452 goto done;
453 }
454 /*
455 Select an appropriate timeout value for awaiting command completion.
456 */
457 switch (opcode) {
458 case BLOGIC_INQ_DEV0TO7:
459 case BLOGIC_INQ_DEV8TO15:
460 case BLOGIC_INQ_DEV:
461 /* Approximately 60 seconds. */
462 timeout = 60 * 10000;
463 break;
464 default:
465 /* Approximately 1 second. */
466 timeout = 10000;
467 break;
468 }
469 /*
470 Receive any Reply Bytes, waiting for either the Command
471 Complete bit to be set in the Interrupt Register, or for the
472 Interrupt Handler to set the Host Adapter Command Completed
473 bit in the Host Adapter structure.
474 */
475 while (--timeout >= 0) {
476 intreg.all = blogic_rdint(adapter);
477 statusreg.all = blogic_rdstatus(adapter);
478 if (intreg.ir.cmd_complete)
479 break;
480 if (adapter->adapter_cmd_complete)
481 break;
482 if (statusreg.sr.datain_ready) {
483 if (++reply_b <= replylen)
484 *reply_p++ = blogic_rddatain(adapter);
485 else
486 blogic_rddatain(adapter);
487 }
488 if (opcode == BLOGIC_FETCH_LOCALRAM &&
489 statusreg.sr.adapter_ready)
490 break;
491 udelay(100);
492 }
493 if (timeout < 0) {
494 blogic_cmd_failure_reason =
495 "Timeout waiting for Command Complete";
496 result = -2;
497 goto done;
498 }
499 /*
500 Clear any pending Command Complete Interrupt.
501 */
502 blogic_intreset(adapter);
503 /*
504 Provide tracing information if requested.
505 */
506 if (blogic_global_options.trace_config) {
507 int i;
508 blogic_notice("blogic_cmd(%02X) Status = %02X: %2d ==> %2d:",
509 adapter, opcode, statusreg.all, replylen,
510 reply_b);
511 if (replylen > reply_b)
512 replylen = reply_b;
513 for (i = 0; i < replylen; i++)
514 blogic_notice(" %02X", adapter,
515 ((unsigned char *) reply)[i]);
516 blogic_notice("\n", adapter);
517 }
518 /*
519 Process Command Invalid conditions.
520 */
521 if (statusreg.sr.cmd_invalid) {
522 /*
523 Some early BusLogic Host Adapters may not recover
524 properly from a Command Invalid condition, so if this
525 appears to be the case, a Soft Reset is issued to the
526 Host Adapter. Potentially invalid commands are never
527 attempted after Mailbox Initialization is performed,
528 so there should be no Host Adapter state lost by a
529 Soft Reset in response to a Command Invalid condition.
530 */
531 udelay(1000);
532 statusreg.all = blogic_rdstatus(adapter);
533 if (statusreg.sr.cmd_invalid || statusreg.sr.rsvd ||
534 statusreg.sr.datain_ready ||
535 statusreg.sr.cmd_param_busy ||
536 !statusreg.sr.adapter_ready ||
537 !statusreg.sr.init_reqd ||
538 statusreg.sr.diag_active ||
539 statusreg.sr.diag_failed) {
540 blogic_softreset(adapter);
541 udelay(1000);
542 }
543 blogic_cmd_failure_reason = "Command Invalid";
544 result = -1;
545 goto done;
546 }
547 /*
548 Handle Excess Parameters Supplied conditions.
549 */
550 if (paramlen > 0) {
551 blogic_cmd_failure_reason = "Excess Parameters Supplied";
552 result = -1;
553 goto done;
554 }
555 /*
556 Indicate the command completed successfully.
557 */
558 blogic_cmd_failure_reason = NULL;
559 result = reply_b;
560 /*
561 Restore the interrupt status if necessary and return.
562 */
563 done:
564 if (!adapter->irq_acquired)
565 local_irq_restore(processor_flag);
566 return result;
567 }
568
569
570 /*
571 blogic_add_probeaddr_isa appends a single ISA I/O Address to the list
572 of I/O Address and Bus Probe Information to be checked for potential BusLogic
573 Host Adapters.
574 */
575
576 static void __init blogic_add_probeaddr_isa(unsigned long io_addr)
577 {
578 struct blogic_probeinfo *probeinfo;
579 if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS)
580 return;
581 probeinfo = &blogic_probeinfo_list[blogic_probeinfo_count++];
582 probeinfo->adapter_type = BLOGIC_MULTIMASTER;
583 probeinfo->adapter_bus_type = BLOGIC_ISA_BUS;
584 probeinfo->io_addr = io_addr;
585 probeinfo->pci_device = NULL;
586 }
587
588
589 /*
590 blogic_init_probeinfo_isa initializes the list of I/O Address and
591 Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters
592 only from the list of standard BusLogic MultiMaster ISA I/O Addresses.
593 */
594
595 static void __init blogic_init_probeinfo_isa(struct blogic_adapter *adapter)
596 {
597 /*
598 If BusLogic Driver Options specifications requested that ISA
599 Bus Probes be inhibited, do not proceed further.
600 */
601 if (blogic_probe_options.noprobe_isa)
602 return;
603 /*
604 Append the list of standard BusLogic MultiMaster ISA I/O Addresses.
605 */
606 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe330)
607 blogic_add_probeaddr_isa(0x330);
608 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe334)
609 blogic_add_probeaddr_isa(0x334);
610 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe230)
611 blogic_add_probeaddr_isa(0x230);
612 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe234)
613 blogic_add_probeaddr_isa(0x234);
614 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe130)
615 blogic_add_probeaddr_isa(0x130);
616 if (!blogic_probe_options.limited_isa || blogic_probe_options.probe134)
617 blogic_add_probeaddr_isa(0x134);
618 }
619
620
621 #ifdef CONFIG_PCI
622
623
624 /*
625 blogic_sort_probeinfo sorts a section of blogic_probeinfo_list in order
626 of increasing PCI Bus and Device Number.
627 */
628
629 static void __init blogic_sort_probeinfo(struct blogic_probeinfo
630 *probeinfo_list, int probeinfo_cnt)
631 {
632 int last_exchange = probeinfo_cnt - 1, bound, j;
633
634 while (last_exchange > 0) {
635 bound = last_exchange;
636 last_exchange = 0;
637 for (j = 0; j < bound; j++) {
638 struct blogic_probeinfo *probeinfo1 =
639 &probeinfo_list[j];
640 struct blogic_probeinfo *probeinfo2 =
641 &probeinfo_list[j + 1];
642 if (probeinfo1->bus > probeinfo2->bus ||
643 (probeinfo1->bus == probeinfo2->bus &&
644 (probeinfo1->dev > probeinfo2->dev))) {
645 struct blogic_probeinfo tmp_probeinfo;
646
647 memcpy(&tmp_probeinfo, probeinfo1,
648 sizeof(struct blogic_probeinfo));
649 memcpy(probeinfo1, probeinfo2,
650 sizeof(struct blogic_probeinfo));
651 memcpy(probeinfo2, &tmp_probeinfo,
652 sizeof(struct blogic_probeinfo));
653 last_exchange = j;
654 }
655 }
656 }
657 }
658
659
660 /*
661 blogic_init_mm_probeinfo initializes the list of I/O Address
662 and Bus Probe Information to be checked for potential BusLogic MultiMaster
663 SCSI Host Adapters by interrogating the PCI Configuration Space on PCI
664 machines as well as from the list of standard BusLogic MultiMaster ISA
665 I/O Addresses. It returns the number of PCI MultiMaster Host Adapters found.
666 */
667
668 static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter)
669 {
670 struct blogic_probeinfo *pr_probeinfo =
671 &blogic_probeinfo_list[blogic_probeinfo_count];
672 int nonpr_mmindex = blogic_probeinfo_count + 1;
673 int nonpr_mmcount = 0, mmcount = 0;
674 bool force_scan_order = false;
675 bool force_scan_order_checked = false;
676 bool addr_seen[6];
677 struct pci_dev *pci_device = NULL;
678 int i;
679 if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS)
680 return 0;
681 blogic_probeinfo_count++;
682 for (i = 0; i < 6; i++)
683 addr_seen[i] = false;
684 /*
685 Iterate over the MultiMaster PCI Host Adapters. For each
686 enumerated host adapter, determine whether its ISA Compatible
687 I/O Port is enabled and if so, whether it is assigned the
688 Primary I/O Address. A host adapter that is assigned the
689 Primary I/O Address will always be the preferred boot device.
690 The MultiMaster BIOS will first recognize a host adapter at
691 the Primary I/O Address, then any other PCI host adapters,
692 and finally any host adapters located at the remaining
693 standard ISA I/O Addresses. When a PCI host adapter is found
694 with its ISA Compatible I/O Port enabled, a command is issued
695 to disable the ISA Compatible I/O Port, and it is noted that the
696 particular standard ISA I/O Address need not be probed.
697 */
698 pr_probeinfo->io_addr = 0;
699 while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
700 PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER,
701 pci_device)) != NULL) {
702 struct blogic_adapter *host_adapter = adapter;
703 struct blogic_adapter_info adapter_info;
704 enum blogic_isa_ioport mod_ioaddr_req;
705 unsigned char bus;
706 unsigned char device;
707 unsigned int irq_ch;
708 unsigned long base_addr0;
709 unsigned long base_addr1;
710 unsigned long io_addr;
711 unsigned long pci_addr;
712
713 if (pci_enable_device(pci_device))
714 continue;
715
716 if (dma_set_mask(&pci_device->dev, DMA_BIT_MASK(32)))
717 continue;
718
719 bus = pci_device->bus->number;
720 device = pci_device->devfn >> 3;
721 irq_ch = pci_device->irq;
722 io_addr = base_addr0 = pci_resource_start(pci_device, 0);
723 pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
724
725 if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
726 blogic_err("BusLogic: Base Address0 0x%X not I/O for " "MultiMaster Host Adapter\n", NULL, base_addr0);
727 blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
728 continue;
729 }
730 if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
731 blogic_err("BusLogic: Base Address1 0x%X not Memory for " "MultiMaster Host Adapter\n", NULL, base_addr1);
732 blogic_err("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, bus, device, pci_addr);
733 continue;
734 }
735 if (irq_ch == 0) {
736 blogic_err("BusLogic: IRQ Channel %d invalid for " "MultiMaster Host Adapter\n", NULL, irq_ch);
737 blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
738 continue;
739 }
740 if (blogic_global_options.trace_probe) {
741 blogic_notice("BusLogic: PCI MultiMaster Host Adapter " "detected at\n", NULL);
742 blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, bus, device, io_addr, pci_addr);
743 }
744 /*
745 Issue the Inquire PCI Host Adapter Information command to determine
746 the ISA Compatible I/O Port. If the ISA Compatible I/O Port is
747 known and enabled, note that the particular Standard ISA I/O
748 Address should not be probed.
749 */
750 host_adapter->io_addr = io_addr;
751 blogic_intreset(host_adapter);
752 if (blogic_cmd(host_adapter, BLOGIC_INQ_PCI_INFO, NULL, 0,
753 &adapter_info, sizeof(adapter_info)) ==
754 sizeof(adapter_info)) {
755 if (adapter_info.isa_port < 6)
756 addr_seen[adapter_info.isa_port] = true;
757 } else
758 adapter_info.isa_port = BLOGIC_IO_DISABLE;
759 /*
760 Issue the Modify I/O Address command to disable the
761 ISA Compatible I/O Port. On PCI Host Adapters, the
762 Modify I/O Address command allows modification of the
763 ISA compatible I/O Address that the Host Adapter
764 responds to; it does not affect the PCI compliant
765 I/O Address assigned at system initialization.
766 */
767 mod_ioaddr_req = BLOGIC_IO_DISABLE;
768 blogic_cmd(host_adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req,
769 sizeof(mod_ioaddr_req), NULL, 0);
770 /*
771 For the first MultiMaster Host Adapter enumerated,
772 issue the Fetch Host Adapter Local RAM command to read
773 byte 45 of the AutoSCSI area, for the setting of the
774 "Use Bus And Device # For PCI Scanning Seq." option.
775 Issue the Inquire Board ID command since this option is
776 only valid for the BT-948/958/958D.
777 */
778 if (!force_scan_order_checked) {
779 struct blogic_fetch_localram fetch_localram;
780 struct blogic_autoscsi_byte45 autoscsi_byte45;
781 struct blogic_board_id id;
782
783 fetch_localram.offset = BLOGIC_AUTOSCSI_BASE + 45;
784 fetch_localram.count = sizeof(autoscsi_byte45);
785 blogic_cmd(host_adapter, BLOGIC_FETCH_LOCALRAM,
786 &fetch_localram, sizeof(fetch_localram),
787 &autoscsi_byte45,
788 sizeof(autoscsi_byte45));
789 blogic_cmd(host_adapter, BLOGIC_GET_BOARD_ID, NULL, 0,
790 &id, sizeof(id));
791 if (id.fw_ver_digit1 == '5')
792 force_scan_order =
793 autoscsi_byte45.force_scan_order;
794 force_scan_order_checked = true;
795 }
796 /*
797 Determine whether this MultiMaster Host Adapter has its
798 ISA Compatible I/O Port enabled and is assigned the
799 Primary I/O Address. If it does, then it is the Primary
800 MultiMaster Host Adapter and must be recognized first.
801 If it does not, then it is added to the list for probing
802 after any Primary MultiMaster Host Adapter is probed.
803 */
804 if (adapter_info.isa_port == BLOGIC_IO_330) {
805 pr_probeinfo->adapter_type = BLOGIC_MULTIMASTER;
806 pr_probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
807 pr_probeinfo->io_addr = io_addr;
808 pr_probeinfo->pci_addr = pci_addr;
809 pr_probeinfo->bus = bus;
810 pr_probeinfo->dev = device;
811 pr_probeinfo->irq_ch = irq_ch;
812 pr_probeinfo->pci_device = pci_dev_get(pci_device);
813 mmcount++;
814 } else if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) {
815 struct blogic_probeinfo *probeinfo =
816 &blogic_probeinfo_list[blogic_probeinfo_count++];
817 probeinfo->adapter_type = BLOGIC_MULTIMASTER;
818 probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
819 probeinfo->io_addr = io_addr;
820 probeinfo->pci_addr = pci_addr;
821 probeinfo->bus = bus;
822 probeinfo->dev = device;
823 probeinfo->irq_ch = irq_ch;
824 probeinfo->pci_device = pci_dev_get(pci_device);
825 nonpr_mmcount++;
826 mmcount++;
827 } else
828 blogic_warn("BusLogic: Too many Host Adapters " "detected\n", NULL);
829 }
830 /*
831 If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq."
832 option is ON for the first enumerated MultiMaster Host Adapter,
833 and if that host adapter is a BT-948/958/958D, then the
834 MultiMaster BIOS will recognize MultiMaster Host Adapters in
835 the order of increasing PCI Bus and Device Number. In that case,
836 sort the probe information into the same order the BIOS uses.
837 If this option is OFF, then the MultiMaster BIOS will recognize
838 MultiMaster Host Adapters in the order they are enumerated by
839 the PCI BIOS, and hence no sorting is necessary.
840 */
841 if (force_scan_order)
842 blogic_sort_probeinfo(&blogic_probeinfo_list[nonpr_mmindex],
843 nonpr_mmcount);
844 /*
845 If no PCI MultiMaster Host Adapter is assigned the Primary
846 I/O Address, then the Primary I/O Address must be probed
847 explicitly before any PCI host adapters are probed.
848 */
849 if (!blogic_probe_options.noprobe_isa)
850 if (pr_probeinfo->io_addr == 0 &&
851 (!blogic_probe_options.limited_isa ||
852 blogic_probe_options.probe330)) {
853 pr_probeinfo->adapter_type = BLOGIC_MULTIMASTER;
854 pr_probeinfo->adapter_bus_type = BLOGIC_ISA_BUS;
855 pr_probeinfo->io_addr = 0x330;
856 }
857 /*
858 Append the list of standard BusLogic MultiMaster ISA I/O Addresses,
859 omitting the Primary I/O Address which has already been handled.
860 */
861 if (!blogic_probe_options.noprobe_isa) {
862 if (!addr_seen[1] &&
863 (!blogic_probe_options.limited_isa ||
864 blogic_probe_options.probe334))
865 blogic_add_probeaddr_isa(0x334);
866 if (!addr_seen[2] &&
867 (!blogic_probe_options.limited_isa ||
868 blogic_probe_options.probe230))
869 blogic_add_probeaddr_isa(0x230);
870 if (!addr_seen[3] &&
871 (!blogic_probe_options.limited_isa ||
872 blogic_probe_options.probe234))
873 blogic_add_probeaddr_isa(0x234);
874 if (!addr_seen[4] &&
875 (!blogic_probe_options.limited_isa ||
876 blogic_probe_options.probe130))
877 blogic_add_probeaddr_isa(0x130);
878 if (!addr_seen[5] &&
879 (!blogic_probe_options.limited_isa ||
880 blogic_probe_options.probe134))
881 blogic_add_probeaddr_isa(0x134);
882 }
883 /*
884 Iterate over the older non-compliant MultiMaster PCI Host Adapters,
885 noting the PCI bus location and assigned IRQ Channel.
886 */
887 pci_device = NULL;
888 while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
889 PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC,
890 pci_device)) != NULL) {
891 unsigned char bus;
892 unsigned char device;
893 unsigned int irq_ch;
894 unsigned long io_addr;
895
896 if (pci_enable_device(pci_device))
897 continue;
898
899 if (dma_set_mask(&pci_device->dev, DMA_BIT_MASK(32)))
900 continue;
901
902 bus = pci_device->bus->number;
903 device = pci_device->devfn >> 3;
904 irq_ch = pci_device->irq;
905 io_addr = pci_resource_start(pci_device, 0);
906
907 if (io_addr == 0 || irq_ch == 0)
908 continue;
909 for (i = 0; i < blogic_probeinfo_count; i++) {
910 struct blogic_probeinfo *probeinfo =
911 &blogic_probeinfo_list[i];
912 if (probeinfo->io_addr == io_addr &&
913 probeinfo->adapter_type == BLOGIC_MULTIMASTER) {
914 probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
915 probeinfo->pci_addr = 0;
916 probeinfo->bus = bus;
917 probeinfo->dev = device;
918 probeinfo->irq_ch = irq_ch;
919 probeinfo->pci_device = pci_dev_get(pci_device);
920 break;
921 }
922 }
923 }
924 return mmcount;
925 }
926
927
928 /*
929 blogic_init_fp_probeinfo initializes the list of I/O Address
930 and Bus Probe Information to be checked for potential BusLogic FlashPoint
931 Host Adapters by interrogating the PCI Configuration Space. It returns the
932 number of FlashPoint Host Adapters found.
933 */
934
935 static int __init blogic_init_fp_probeinfo(struct blogic_adapter *adapter)
936 {
937 int fpindex = blogic_probeinfo_count, fpcount = 0;
938 struct pci_dev *pci_device = NULL;
939 /*
940 Interrogate PCI Configuration Space for any FlashPoint Host Adapters.
941 */
942 while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
943 PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT,
944 pci_device)) != NULL) {
945 unsigned char bus;
946 unsigned char device;
947 unsigned int irq_ch;
948 unsigned long base_addr0;
949 unsigned long base_addr1;
950 unsigned long io_addr;
951 unsigned long pci_addr;
952
953 if (pci_enable_device(pci_device))
954 continue;
955
956 if (dma_set_mask(&pci_device->dev, DMA_BIT_MASK(32)))
957 continue;
958
959 bus = pci_device->bus->number;
960 device = pci_device->devfn >> 3;
961 irq_ch = pci_device->irq;
962 io_addr = base_addr0 = pci_resource_start(pci_device, 0);
963 pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
964 #ifdef CONFIG_SCSI_FLASHPOINT
965 if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
966 blogic_err("BusLogic: Base Address0 0x%X not I/O for " "FlashPoint Host Adapter\n", NULL, base_addr0);
967 blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
968 continue;
969 }
970 if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
971 blogic_err("BusLogic: Base Address1 0x%X not Memory for " "FlashPoint Host Adapter\n", NULL, base_addr1);
972 blogic_err("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, bus, device, pci_addr);
973 continue;
974 }
975 if (irq_ch == 0) {
976 blogic_err("BusLogic: IRQ Channel %d invalid for " "FlashPoint Host Adapter\n", NULL, irq_ch);
977 blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
978 continue;
979 }
980 if (blogic_global_options.trace_probe) {
981 blogic_notice("BusLogic: FlashPoint Host Adapter " "detected at\n", NULL);
982 blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, bus, device, io_addr, pci_addr);
983 }
984 if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) {
985 struct blogic_probeinfo *probeinfo =
986 &blogic_probeinfo_list[blogic_probeinfo_count++];
987 probeinfo->adapter_type = BLOGIC_FLASHPOINT;
988 probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
989 probeinfo->io_addr = io_addr;
990 probeinfo->pci_addr = pci_addr;
991 probeinfo->bus = bus;
992 probeinfo->dev = device;
993 probeinfo->irq_ch = irq_ch;
994 probeinfo->pci_device = pci_dev_get(pci_device);
995 fpcount++;
996 } else
997 blogic_warn("BusLogic: Too many Host Adapters " "detected\n", NULL);
998 #else
999 blogic_err("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", NULL, bus, device);
1000 blogic_err("BusLogic: I/O Address 0x%X PCI Address 0x%X, irq %d, " "but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch);
1001 blogic_err("BusLogic: support was omitted in this kernel " "configuration.\n", NULL);
1002 #endif
1003 }
1004 /*
1005 The FlashPoint BIOS will scan for FlashPoint Host Adapters in the order of
1006 increasing PCI Bus and Device Number, so sort the probe information into
1007 the same order the BIOS uses.
1008 */
1009 blogic_sort_probeinfo(&blogic_probeinfo_list[fpindex], fpcount);
1010 return fpcount;
1011 }
1012
1013
1014 /*
1015 blogic_init_probeinfo_list initializes the list of I/O Address and Bus
1016 Probe Information to be checked for potential BusLogic SCSI Host Adapters by
1017 interrogating the PCI Configuration Space on PCI machines as well as from the
1018 list of standard BusLogic MultiMaster ISA I/O Addresses. By default, if both
1019 FlashPoint and PCI MultiMaster Host Adapters are present, this driver will
1020 probe for FlashPoint Host Adapters first unless the BIOS primary disk is
1021 controlled by the first PCI MultiMaster Host Adapter, in which case
1022 MultiMaster Host Adapters will be probed first. The BusLogic Driver Options
1023 specifications "MultiMasterFirst" and "FlashPointFirst" can be used to force
1024 a particular probe order.
1025 */
1026
1027 static void __init blogic_init_probeinfo_list(struct blogic_adapter *adapter)
1028 {
1029 /*
1030 If a PCI BIOS is present, interrogate it for MultiMaster and
1031 FlashPoint Host Adapters; otherwise, default to the standard
1032 ISA MultiMaster probe.
1033 */
1034 if (!blogic_probe_options.noprobe_pci) {
1035 if (blogic_probe_options.multimaster_first) {
1036 blogic_init_mm_probeinfo(adapter);
1037 blogic_init_fp_probeinfo(adapter);
1038 } else if (blogic_probe_options.flashpoint_first) {
1039 blogic_init_fp_probeinfo(adapter);
1040 blogic_init_mm_probeinfo(adapter);
1041 } else {
1042 int fpcount = blogic_init_fp_probeinfo(adapter);
1043 int mmcount = blogic_init_mm_probeinfo(adapter);
1044 if (fpcount > 0 && mmcount > 0) {
1045 struct blogic_probeinfo *probeinfo =
1046 &blogic_probeinfo_list[fpcount];
1047 struct blogic_adapter *myadapter = adapter;
1048 struct blogic_fetch_localram fetch_localram;
1049 struct blogic_bios_drvmap d0_mapbyte;
1050
1051 while (probeinfo->adapter_bus_type !=
1052 BLOGIC_PCI_BUS)
1053 probeinfo++;
1054 myadapter->io_addr = probeinfo->io_addr;
1055 fetch_localram.offset =
1056 BLOGIC_BIOS_BASE + BLOGIC_BIOS_DRVMAP;
1057 fetch_localram.count = sizeof(d0_mapbyte);
1058 blogic_cmd(myadapter, BLOGIC_FETCH_LOCALRAM,
1059 &fetch_localram,
1060 sizeof(fetch_localram),
1061 &d0_mapbyte,
1062 sizeof(d0_mapbyte));
1063 /*
1064 If the Map Byte for BIOS Drive 0 indicates
1065 that BIOS Drive 0 is controlled by this
1066 PCI MultiMaster Host Adapter, then reverse
1067 the probe order so that MultiMaster Host
1068 Adapters are probed before FlashPoint Host
1069 Adapters.
1070 */
1071 if (d0_mapbyte.diskgeom != BLOGIC_BIOS_NODISK) {
1072 struct blogic_probeinfo saved_probeinfo[BLOGIC_MAX_ADAPTERS];
1073 int mmcount = blogic_probeinfo_count - fpcount;
1074
1075 memcpy(saved_probeinfo,
1076 blogic_probeinfo_list,
1077 blogic_probeinfo_count * sizeof(struct blogic_probeinfo));
1078 memcpy(&blogic_probeinfo_list[0],
1079 &saved_probeinfo[fpcount],
1080 mmcount * sizeof(struct blogic_probeinfo));
1081 memcpy(&blogic_probeinfo_list[mmcount],
1082 &saved_probeinfo[0],
1083 fpcount * sizeof(struct blogic_probeinfo));
1084 }
1085 }
1086 }
1087 } else {
1088 blogic_init_probeinfo_isa(adapter);
1089 }
1090 }
1091
1092
1093 #else
1094 #define blogic_init_probeinfo_list(adapter) \
1095 blogic_init_probeinfo_isa(adapter)
1096 #endif /* CONFIG_PCI */
1097
1098
1099 /*
1100 blogic_failure prints a standardized error message, and then returns false.
1101 */
1102
1103 static bool blogic_failure(struct blogic_adapter *adapter, char *msg)
1104 {
1105 blogic_announce_drvr(adapter);
1106 if (adapter->adapter_bus_type == BLOGIC_PCI_BUS) {
1107 blogic_err("While configuring BusLogic PCI Host Adapter at\n",
1108 adapter);
1109 blogic_err("Bus %d Device %d I/O Address 0x%X PCI Address 0x%X:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr, adapter->pci_addr);
1110 } else
1111 blogic_err("While configuring BusLogic Host Adapter at " "I/O Address 0x%X:\n", adapter, adapter->io_addr);
1112 blogic_err("%s FAILED - DETACHING\n", adapter, msg);
1113 if (blogic_cmd_failure_reason != NULL)
1114 blogic_err("ADDITIONAL FAILURE INFO - %s\n", adapter,
1115 blogic_cmd_failure_reason);
1116 return false;
1117 }
1118
1119
1120 /*
1121 blogic_probe probes for a BusLogic Host Adapter.
1122 */
1123
1124 static bool __init blogic_probe(struct blogic_adapter *adapter)
1125 {
1126 union blogic_stat_reg statusreg;
1127 union blogic_int_reg intreg;
1128 union blogic_geo_reg georeg;
1129 /*
1130 FlashPoint Host Adapters are Probed by the FlashPoint SCCB Manager.
1131 */
1132 if (blogic_flashpoint_type(adapter)) {
1133 struct fpoint_info *fpinfo = &adapter->fpinfo;
1134 fpinfo->base_addr = (u32) adapter->io_addr;
1135 fpinfo->irq_ch = adapter->irq_ch;
1136 fpinfo->present = false;
1137 if (!(FlashPoint_ProbeHostAdapter(fpinfo) == 0 &&
1138 fpinfo->present)) {
1139 blogic_err("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", adapter, adapter->bus, adapter->dev);
1140 blogic_err("BusLogic: I/O Address 0x%X PCI Address 0x%X, " "but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_addr);
1141 blogic_err("BusLogic: Probe Function failed to validate it.\n", adapter);
1142 return false;
1143 }
1144 if (blogic_global_options.trace_probe)
1145 blogic_notice("BusLogic_Probe(0x%X): FlashPoint Found\n", adapter, adapter->io_addr);
1146 /*
1147 Indicate the Host Adapter Probe completed successfully.
1148 */
1149 return true;
1150 }
1151 /*
1152 Read the Status, Interrupt, and Geometry Registers to test if there are I/O
1153 ports that respond, and to check the values to determine if they are from a
1154 BusLogic Host Adapter. A nonexistent I/O port will return 0xFF, in which
1155 case there is definitely no BusLogic Host Adapter at this base I/O Address.
1156 The test here is a subset of that used by the BusLogic Host Adapter BIOS.
1157 */
1158 statusreg.all = blogic_rdstatus(adapter);
1159 intreg.all = blogic_rdint(adapter);
1160 georeg.all = blogic_rdgeom(adapter);
1161 if (blogic_global_options.trace_probe)
1162 blogic_notice("BusLogic_Probe(0x%X): Status 0x%02X, Interrupt 0x%02X, " "Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all, intreg.all, georeg.all);
1163 if (statusreg.all == 0 || statusreg.sr.diag_active ||
1164 statusreg.sr.cmd_param_busy || statusreg.sr.rsvd ||
1165 statusreg.sr.cmd_invalid || intreg.ir.rsvd != 0)
1166 return false;
1167 /*
1168 Check the undocumented Geometry Register to test if there is
1169 an I/O port that responded. Adaptec Host Adapters do not
1170 implement the Geometry Register, so this test helps serve to
1171 avoid incorrectly recognizing an Adaptec 1542A or 1542B as a
1172 BusLogic. Unfortunately, the Adaptec 1542C series does respond
1173 to the Geometry Register I/O port, but it will be rejected
1174 later when the Inquire Extended Setup Information command is
1175 issued in blogic_checkadapter. The AMI FastDisk Host Adapter
1176 is a BusLogic clone that implements the same interface as
1177 earlier BusLogic Host Adapters, including the undocumented
1178 commands, and is therefore supported by this driver. However,
1179 the AMI FastDisk always returns 0x00 upon reading the Geometry
1180 Register, so the extended translation option should always be
1181 left disabled on the AMI FastDisk.
1182 */
1183 if (georeg.all == 0xFF)
1184 return false;
1185 /*
1186 Indicate the Host Adapter Probe completed successfully.
1187 */
1188 return true;
1189 }
1190
1191
1192 /*
1193 blogic_hwreset issues a Hardware Reset to the Host Adapter
1194 and waits for Host Adapter Diagnostics to complete. If hard_reset is true, a
1195 Hard Reset is performed which also initiates a SCSI Bus Reset. Otherwise, a
1196 Soft Reset is performed which only resets the Host Adapter without forcing a
1197 SCSI Bus Reset.
1198 */
1199
1200 static bool blogic_hwreset(struct blogic_adapter *adapter, bool hard_reset)
1201 {
1202 union blogic_stat_reg statusreg;
1203 int timeout;
1204 /*
1205 FlashPoint Host Adapters are Hard Reset by the FlashPoint
1206 SCCB Manager.
1207 */
1208 if (blogic_flashpoint_type(adapter)) {
1209 struct fpoint_info *fpinfo = &adapter->fpinfo;
1210 fpinfo->softreset = !hard_reset;
1211 fpinfo->report_underrun = true;
1212 adapter->cardhandle =
1213 FlashPoint_HardwareResetHostAdapter(fpinfo);
1214 if (adapter->cardhandle == (void *)FPOINT_BADCARD_HANDLE)
1215 return false;
1216 /*
1217 Indicate the Host Adapter Hard Reset completed successfully.
1218 */
1219 return true;
1220 }
1221 /*
1222 Issue a Hard Reset or Soft Reset Command to the Host Adapter.
1223 The Host Adapter should respond by setting Diagnostic Active in
1224 the Status Register.
1225 */
1226 if (hard_reset)
1227 blogic_hardreset(adapter);
1228 else
1229 blogic_softreset(adapter);
1230 /*
1231 Wait until Diagnostic Active is set in the Status Register.
1232 */
1233 timeout = 5 * 10000;
1234 while (--timeout >= 0) {
1235 statusreg.all = blogic_rdstatus(adapter);
1236 if (statusreg.sr.diag_active)
1237 break;
1238 udelay(100);
1239 }
1240 if (blogic_global_options.trace_hw_reset)
1241 blogic_notice("BusLogic_HardwareReset(0x%X): Diagnostic Active, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1242 if (timeout < 0)
1243 return false;
1244 /*
1245 Wait 100 microseconds to allow completion of any initial diagnostic
1246 activity which might leave the contents of the Status Register
1247 unpredictable.
1248 */
1249 udelay(100);
1250 /*
1251 Wait until Diagnostic Active is reset in the Status Register.
1252 */
1253 timeout = 10 * 10000;
1254 while (--timeout >= 0) {
1255 statusreg.all = blogic_rdstatus(adapter);
1256 if (!statusreg.sr.diag_active)
1257 break;
1258 udelay(100);
1259 }
1260 if (blogic_global_options.trace_hw_reset)
1261 blogic_notice("BusLogic_HardwareReset(0x%X): Diagnostic Completed, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1262 if (timeout < 0)
1263 return false;
1264 /*
1265 Wait until at least one of the Diagnostic Failure, Host Adapter
1266 Ready, or Data In Register Ready bits is set in the Status Register.
1267 */
1268 timeout = 10000;
1269 while (--timeout >= 0) {
1270 statusreg.all = blogic_rdstatus(adapter);
1271 if (statusreg.sr.diag_failed || statusreg.sr.adapter_ready ||
1272 statusreg.sr.datain_ready)
1273 break;
1274 udelay(100);
1275 }
1276 if (blogic_global_options.trace_hw_reset)
1277 blogic_notice("BusLogic_HardwareReset(0x%X): Host Adapter Ready, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
1278 if (timeout < 0)
1279 return false;
1280 /*
1281 If Diagnostic Failure is set or Host Adapter Ready is reset,
1282 then an error occurred during the Host Adapter diagnostics.
1283 If Data In Register Ready is set, then there is an Error Code
1284 available.
1285 */
1286 if (statusreg.sr.diag_failed || !statusreg.sr.adapter_ready) {
1287 blogic_cmd_failure_reason = NULL;
1288 blogic_failure(adapter, "HARD RESET DIAGNOSTICS");
1289 blogic_err("HOST ADAPTER STATUS REGISTER = %02X\n", adapter,
1290 statusreg.all);
1291 if (statusreg.sr.datain_ready)
1292 blogic_err("HOST ADAPTER ERROR CODE = %d\n", adapter,
1293 blogic_rddatain(adapter));
1294 return false;
1295 }
1296 /*
1297 Indicate the Host Adapter Hard Reset completed successfully.
1298 */
1299 return true;
1300 }
1301
1302
1303 /*
1304 blogic_checkadapter checks to be sure this really is a BusLogic
1305 Host Adapter.
1306 */
1307
1308 static bool __init blogic_checkadapter(struct blogic_adapter *adapter)
1309 {
1310 struct blogic_ext_setup ext_setupinfo;
1311 unsigned char req_replylen;
1312 bool result = true;
1313 /*
1314 FlashPoint Host Adapters do not require this protection.
1315 */
1316 if (blogic_flashpoint_type(adapter))
1317 return true;
1318 /*
1319 Issue the Inquire Extended Setup Information command. Only genuine
1320 BusLogic Host Adapters and true clones support this command.
1321 Adaptec 1542C series Host Adapters that respond to the Geometry
1322 Register I/O port will fail this command.
1323 */
1324 req_replylen = sizeof(ext_setupinfo);
1325 if (blogic_cmd(adapter, BLOGIC_INQ_EXTSETUP, &req_replylen,
1326 sizeof(req_replylen), &ext_setupinfo,
1327 sizeof(ext_setupinfo)) != sizeof(ext_setupinfo))
1328 result = false;
1329 /*
1330 Provide tracing information if requested and return.
1331 */
1332 if (blogic_global_options.trace_probe)
1333 blogic_notice("BusLogic_Check(0x%X): MultiMaster %s\n", adapter,
1334 adapter->io_addr,
1335 (result ? "Found" : "Not Found"));
1336 return result;
1337 }
1338
1339
1340 /*
1341 blogic_rdconfig reads the Configuration Information
1342 from Host Adapter and initializes the Host Adapter structure.
1343 */
1344
1345 static bool __init blogic_rdconfig(struct blogic_adapter *adapter)
1346 {
1347 struct blogic_board_id id;
1348 struct blogic_config config;
1349 struct blogic_setup_info setupinfo;
1350 struct blogic_ext_setup ext_setupinfo;
1351 unsigned char model[5];
1352 unsigned char fw_ver_digit3;
1353 unsigned char fw_ver_letter;
1354 struct blogic_adapter_info adapter_info;
1355 struct blogic_fetch_localram fetch_localram;
1356 struct blogic_autoscsi autoscsi;
1357 union blogic_geo_reg georeg;
1358 unsigned char req_replylen;
1359 unsigned char *tgt, ch;
1360 int tgt_id, i;
1361 /*
1362 Configuration Information for FlashPoint Host Adapters is
1363 provided in the fpoint_info structure by the FlashPoint
1364 SCCB Manager's Probe Function. Initialize fields in the
1365 Host Adapter structure from the fpoint_info structure.
1366 */
1367 if (blogic_flashpoint_type(adapter)) {
1368 struct fpoint_info *fpinfo = &adapter->fpinfo;
1369 tgt = adapter->model;
1370 *tgt++ = 'B';
1371 *tgt++ = 'T';
1372 *tgt++ = '-';
1373 for (i = 0; i < sizeof(fpinfo->model); i++)
1374 *tgt++ = fpinfo->model[i];
1375 *tgt++ = '\0';
1376 strcpy(adapter->fw_ver, FLASHPOINT_FW_VER);
1377 adapter->scsi_id = fpinfo->scsi_id;
1378 adapter->ext_trans_enable = fpinfo->ext_trans_enable;
1379 adapter->parity = fpinfo->parity;
1380 adapter->reset_enabled = !fpinfo->softreset;
1381 adapter->level_int = true;
1382 adapter->wide = fpinfo->wide;
1383 adapter->differential = false;
1384 adapter->scam = true;
1385 adapter->ultra = true;
1386 adapter->ext_lun = true;
1387 adapter->terminfo_valid = true;
1388 adapter->low_term = fpinfo->low_term;
1389 adapter->high_term = fpinfo->high_term;
1390 adapter->scam_enabled = fpinfo->scam_enabled;
1391 adapter->scam_lev2 = fpinfo->scam_lev2;
1392 adapter->drvr_sglimit = BLOGIC_SG_LIMIT;
1393 adapter->maxdev = (adapter->wide ? 16 : 8);
1394 adapter->maxlun = 32;
1395 adapter->initccbs = 4 * BLOGIC_CCB_GRP_ALLOCSIZE;
1396 adapter->inc_ccbs = BLOGIC_CCB_GRP_ALLOCSIZE;
1397 adapter->drvr_qdepth = 255;
1398 adapter->adapter_qdepth = adapter->drvr_qdepth;
1399 adapter->sync_ok = fpinfo->sync_ok;
1400 adapter->fast_ok = fpinfo->fast_ok;
1401 adapter->ultra_ok = fpinfo->ultra_ok;
1402 adapter->wide_ok = fpinfo->wide_ok;
1403 adapter->discon_ok = fpinfo->discon_ok;
1404 adapter->tagq_ok = 0xFFFF;
1405 goto common;
1406 }
1407 /*
1408 Issue the Inquire Board ID command.
1409 */
1410 if (blogic_cmd(adapter, BLOGIC_GET_BOARD_ID, NULL, 0, &id,
1411 sizeof(id)) != sizeof(id))
1412 return blogic_failure(adapter, "INQUIRE BOARD ID");
1413 /*
1414 Issue the Inquire Configuration command.
1415 */
1416 if (blogic_cmd(adapter, BLOGIC_INQ_CONFIG, NULL, 0, &config,
1417 sizeof(config))
1418 != sizeof(config))
1419 return blogic_failure(adapter, "INQUIRE CONFIGURATION");
1420 /*
1421 Issue the Inquire Setup Information command.
1422 */
1423 req_replylen = sizeof(setupinfo);
1424 if (blogic_cmd(adapter, BLOGIC_INQ_SETUPINFO, &req_replylen,
1425 sizeof(req_replylen), &setupinfo,
1426 sizeof(setupinfo)) != sizeof(setupinfo))
1427 return blogic_failure(adapter, "INQUIRE SETUP INFORMATION");
1428 /*
1429 Issue the Inquire Extended Setup Information command.
1430 */
1431 req_replylen = sizeof(ext_setupinfo);
1432 if (blogic_cmd(adapter, BLOGIC_INQ_EXTSETUP, &req_replylen,
1433 sizeof(req_replylen), &ext_setupinfo,
1434 sizeof(ext_setupinfo)) != sizeof(ext_setupinfo))
1435 return blogic_failure(adapter,
1436 "INQUIRE EXTENDED SETUP INFORMATION");
1437 /*
1438 Issue the Inquire Firmware Version 3rd Digit command.
1439 */
1440 fw_ver_digit3 = '\0';
1441 if (id.fw_ver_digit1 > '0')
1442 if (blogic_cmd(adapter, BLOGIC_INQ_FWVER_D3, NULL, 0,
1443 &fw_ver_digit3,
1444 sizeof(fw_ver_digit3)) != sizeof(fw_ver_digit3))
1445 return blogic_failure(adapter,
1446 "INQUIRE FIRMWARE 3RD DIGIT");
1447 /*
1448 Issue the Inquire Host Adapter Model Number command.
1449 */
1450 if (ext_setupinfo.bus_type == 'A' && id.fw_ver_digit1 == '2')
1451 /* BusLogic BT-542B ISA 2.xx */
1452 strcpy(model, "542B");
1453 else if (ext_setupinfo.bus_type == 'E' && id.fw_ver_digit1 == '2' &&
1454 (id.fw_ver_digit2 <= '1' || (id.fw_ver_digit2 == '2' &&
1455 fw_ver_digit3 == '0')))
1456 /* BusLogic BT-742A EISA 2.1x or 2.20 */
1457 strcpy(model, "742A");
1458 else if (ext_setupinfo.bus_type == 'E' && id.fw_ver_digit1 == '0')
1459 /* AMI FastDisk EISA Series 441 0.x */
1460 strcpy(model, "747A");
1461 else {
1462 req_replylen = sizeof(model);
1463 if (blogic_cmd(adapter, BLOGIC_INQ_MODELNO, &req_replylen,
1464 sizeof(req_replylen), &model,
1465 sizeof(model)) != sizeof(model))
1466 return blogic_failure(adapter,
1467 "INQUIRE HOST ADAPTER MODEL NUMBER");
1468 }
1469 /*
1470 BusLogic MultiMaster Host Adapters can be identified by their
1471 model number and the major version number of their firmware
1472 as follows:
1473
1474 5.xx BusLogic "W" Series Host Adapters:
1475 BT-948/958/958D
1476 4.xx BusLogic "C" Series Host Adapters:
1477 BT-946C/956C/956CD/747C/757C/757CD/445C/545C/540CF
1478 3.xx BusLogic "S" Series Host Adapters:
1479 BT-747S/747D/757S/757D/445S/545S/542D
1480 BT-542B/742A (revision H)
1481 2.xx BusLogic "A" Series Host Adapters:
1482 BT-542B/742A (revision G and below)
1483 0.xx AMI FastDisk VLB/EISA BusLogic Clone Host Adapter
1484 */
1485 /*
1486 Save the Model Name and Host Adapter Name in the Host Adapter
1487 structure.
1488 */
1489 tgt = adapter->model;
1490 *tgt++ = 'B';
1491 *tgt++ = 'T';
1492 *tgt++ = '-';
1493 for (i = 0; i < sizeof(model); i++) {
1494 ch = model[i];
1495 if (ch == ' ' || ch == '\0')
1496 break;
1497 *tgt++ = ch;
1498 }
1499 *tgt++ = '\0';
1500 /*
1501 Save the Firmware Version in the Host Adapter structure.
1502 */
1503 tgt = adapter->fw_ver;
1504 *tgt++ = id.fw_ver_digit1;
1505 *tgt++ = '.';
1506 *tgt++ = id.fw_ver_digit2;
1507 if (fw_ver_digit3 != ' ' && fw_ver_digit3 != '\0')
1508 *tgt++ = fw_ver_digit3;
1509 *tgt = '\0';
1510 /*
1511 Issue the Inquire Firmware Version Letter command.
1512 */
1513 if (strcmp(adapter->fw_ver, "3.3") >= 0) {
1514 if (blogic_cmd(adapter, BLOGIC_INQ_FWVER_LETTER, NULL, 0,
1515 &fw_ver_letter,
1516 sizeof(fw_ver_letter)) != sizeof(fw_ver_letter))
1517 return blogic_failure(adapter,
1518 "INQUIRE FIRMWARE VERSION LETTER");
1519 if (fw_ver_letter != ' ' && fw_ver_letter != '\0')
1520 *tgt++ = fw_ver_letter;
1521 *tgt = '\0';
1522 }
1523 /*
1524 Save the Host Adapter SCSI ID in the Host Adapter structure.
1525 */
1526 adapter->scsi_id = config.id;
1527 /*
1528 Determine the Bus Type and save it in the Host Adapter structure,
1529 determine and save the IRQ Channel if necessary, and determine
1530 and save the DMA Channel for ISA Host Adapters.
1531 */
1532 adapter->adapter_bus_type =
1533 blogic_adater_bus_types[adapter->model[3] - '4'];
1534 if (adapter->irq_ch == 0) {
1535 if (config.irq_ch9)
1536 adapter->irq_ch = 9;
1537 else if (config.irq_ch10)
1538 adapter->irq_ch = 10;
1539 else if (config.irq_ch11)
1540 adapter->irq_ch = 11;
1541 else if (config.irq_ch12)
1542 adapter->irq_ch = 12;
1543 else if (config.irq_ch14)
1544 adapter->irq_ch = 14;
1545 else if (config.irq_ch15)
1546 adapter->irq_ch = 15;
1547 }
1548 if (adapter->adapter_bus_type == BLOGIC_ISA_BUS) {
1549 if (config.dma_ch5)
1550 adapter->dma_ch = 5;
1551 else if (config.dma_ch6)
1552 adapter->dma_ch = 6;
1553 else if (config.dma_ch7)
1554 adapter->dma_ch = 7;
1555 }
1556 /*
1557 Determine whether Extended Translation is enabled and save it in
1558 the Host Adapter structure.
1559 */
1560 georeg.all = blogic_rdgeom(adapter);
1561 adapter->ext_trans_enable = georeg.gr.ext_trans_enable;
1562 /*
1563 Save the Scatter Gather Limits, Level Sensitive Interrupt flag, Wide
1564 SCSI flag, Differential SCSI flag, SCAM Supported flag, and
1565 Ultra SCSI flag in the Host Adapter structure.
1566 */
1567 adapter->adapter_sglimit = ext_setupinfo.sg_limit;
1568 adapter->drvr_sglimit = adapter->adapter_sglimit;
1569 if (adapter->adapter_sglimit > BLOGIC_SG_LIMIT)
1570 adapter->drvr_sglimit = BLOGIC_SG_LIMIT;
1571 if (ext_setupinfo.misc.level_int)
1572 adapter->level_int = true;
1573 adapter->wide = ext_setupinfo.wide;
1574 adapter->differential = ext_setupinfo.differential;
1575 adapter->scam = ext_setupinfo.scam;
1576 adapter->ultra = ext_setupinfo.ultra;
1577 /*
1578 Determine whether Extended LUN Format CCBs are supported and save the
1579 information in the Host Adapter structure.
1580 */
1581 if (adapter->fw_ver[0] == '5' || (adapter->fw_ver[0] == '4' &&
1582 adapter->wide))
1583 adapter->ext_lun = true;
1584 /*
1585 Issue the Inquire PCI Host Adapter Information command to read the
1586 Termination Information from "W" series MultiMaster Host Adapters.
1587 */
1588 if (adapter->fw_ver[0] == '5') {
1589 if (blogic_cmd(adapter, BLOGIC_INQ_PCI_INFO, NULL, 0,
1590 &adapter_info,
1591 sizeof(adapter_info)) != sizeof(adapter_info))
1592 return blogic_failure(adapter,
1593 "INQUIRE PCI HOST ADAPTER INFORMATION");
1594 /*
1595 Save the Termination Information in the Host Adapter
1596 structure.
1597 */
1598 if (adapter_info.genericinfo_valid) {
1599 adapter->terminfo_valid = true;
1600 adapter->low_term = adapter_info.low_term;
1601 adapter->high_term = adapter_info.high_term;
1602 }
1603 }
1604 /*
1605 Issue the Fetch Host Adapter Local RAM command to read the
1606 AutoSCSI data from "W" and "C" series MultiMaster Host Adapters.
1607 */
1608 if (adapter->fw_ver[0] >= '4') {
1609 fetch_localram.offset = BLOGIC_AUTOSCSI_BASE;
1610 fetch_localram.count = sizeof(autoscsi);
1611 if (blogic_cmd(adapter, BLOGIC_FETCH_LOCALRAM, &fetch_localram,
1612 sizeof(fetch_localram), &autoscsi,
1613 sizeof(autoscsi)) != sizeof(autoscsi))
1614 return blogic_failure(adapter,
1615 "FETCH HOST ADAPTER LOCAL RAM");
1616 /*
1617 Save the Parity Checking Enabled, Bus Reset Enabled,
1618 and Termination Information in the Host Adapter structure.
1619 */
1620 adapter->parity = autoscsi.parity;
1621 adapter->reset_enabled = autoscsi.reset_enabled;
1622 if (adapter->fw_ver[0] == '4') {
1623 adapter->terminfo_valid = true;
1624 adapter->low_term = autoscsi.low_term;
1625 adapter->high_term = autoscsi.high_term;
1626 }
1627 /*
1628 Save the Wide Permitted, Fast Permitted, Synchronous
1629 Permitted, Disconnect Permitted, Ultra Permitted, and
1630 SCAM Information in the Host Adapter structure.
1631 */
1632 adapter->wide_ok = autoscsi.wide_ok;
1633 adapter->fast_ok = autoscsi.fast_ok;
1634 adapter->sync_ok = autoscsi.sync_ok;
1635 adapter->discon_ok = autoscsi.discon_ok;
1636 if (adapter->ultra)
1637 adapter->ultra_ok = autoscsi.ultra_ok;
1638 if (adapter->scam) {
1639 adapter->scam_enabled = autoscsi.scam_enabled;
1640 adapter->scam_lev2 = autoscsi.scam_lev2;
1641 }
1642 }
1643 /*
1644 Initialize fields in the Host Adapter structure for "S" and "A"
1645 series MultiMaster Host Adapters.
1646 */
1647 if (adapter->fw_ver[0] < '4') {
1648 if (setupinfo.sync) {
1649 adapter->sync_ok = 0xFF;
1650 if (adapter->adapter_bus_type == BLOGIC_EISA_BUS) {
1651 if (ext_setupinfo.misc.fast_on_eisa)
1652 adapter->fast_ok = 0xFF;
1653 if (strcmp(adapter->model, "BT-757") == 0)
1654 adapter->wide_ok = 0xFF;
1655 }
1656 }
1657 adapter->discon_ok = 0xFF;
1658 adapter->parity = setupinfo.parity;
1659 adapter->reset_enabled = true;
1660 }
1661 /*
1662 Determine the maximum number of Target IDs and Logical Units
1663 supported by this driver for Wide and Narrow Host Adapters.
1664 */
1665 adapter->maxdev = (adapter->wide ? 16 : 8);
1666 adapter->maxlun = (adapter->ext_lun ? 32 : 8);
1667 /*
1668 Select appropriate values for the Mailbox Count, Driver Queue Depth,
1669 Initial CCBs, and Incremental CCBs variables based on whether
1670 or not Strict Round Robin Mode is supported. If Strict Round
1671 Robin Mode is supported, then there is no performance degradation
1672 in using the maximum possible number of Outgoing and Incoming
1673 Mailboxes and allowing the Tagged and Untagged Queue Depths to
1674 determine the actual utilization. If Strict Round Robin Mode is
1675 not supported, then the Host Adapter must scan all the Outgoing
1676 Mailboxes whenever an Outgoing Mailbox entry is made, which can
1677 cause a substantial performance penalty. The host adapters
1678 actually have room to store the following number of CCBs
1679 internally; that is, they can internally queue and manage this
1680 many active commands on the SCSI bus simultaneously. Performance
1681 measurements demonstrate that the Driver Queue Depth should be
1682 set to the Mailbox Count, rather than the Host Adapter Queue
1683 Depth (internal CCB capacity), as it is more efficient to have the
1684 queued commands waiting in Outgoing Mailboxes if necessary than
1685 to block the process in the higher levels of the SCSI Subsystem.
1686
1687 192 BT-948/958/958D
1688 100 BT-946C/956C/956CD/747C/757C/757CD/445C
1689 50 BT-545C/540CF
1690 30 BT-747S/747D/757S/757D/445S/545S/542D/542B/742A
1691 */
1692 if (adapter->fw_ver[0] == '5')
1693 adapter->adapter_qdepth = 192;
1694 else if (adapter->fw_ver[0] == '4')
1695 adapter->adapter_qdepth = (adapter->adapter_bus_type !=
1696 BLOGIC_ISA_BUS ? 100 : 50);
1697 else
1698 adapter->adapter_qdepth = 30;
1699 if (strcmp(adapter->fw_ver, "3.31") >= 0) {
1700 adapter->strict_rr = true;
1701 adapter->mbox_count = BLOGIC_MAX_MAILBOX;
1702 } else {
1703 adapter->strict_rr = false;
1704 adapter->mbox_count = 32;
1705 }
1706 adapter->drvr_qdepth = adapter->mbox_count;
1707 adapter->initccbs = 4 * BLOGIC_CCB_GRP_ALLOCSIZE;
1708 adapter->inc_ccbs = BLOGIC_CCB_GRP_ALLOCSIZE;
1709 /*
1710 Tagged Queuing support is available and operates properly on
1711 all "W" series MultiMaster Host Adapters, on "C" series
1712 MultiMaster Host Adapters with firmware version 4.22 and above,
1713 and on "S" series MultiMaster Host Adapters with firmware version
1714 3.35 and above.
1715 */
1716 adapter->tagq_ok = 0;
1717 switch (adapter->fw_ver[0]) {
1718 case '5':
1719 adapter->tagq_ok = 0xFFFF;
1720 break;
1721 case '4':
1722 if (strcmp(adapter->fw_ver, "4.22") >= 0)
1723 adapter->tagq_ok = 0xFFFF;
1724 break;
1725 case '3':
1726 if (strcmp(adapter->fw_ver, "3.35") >= 0)
1727 adapter->tagq_ok = 0xFFFF;
1728 break;
1729 }
1730 /*
1731 Determine the Host Adapter BIOS Address if the BIOS is enabled and
1732 save it in the Host Adapter structure. The BIOS is disabled if the
1733 bios_addr is 0.
1734 */
1735 adapter->bios_addr = ext_setupinfo.bios_addr << 12;
1736 /*
1737 ISA Host Adapters require Bounce Buffers if there is more than
1738 16MB memory.
1739 */
1740 if (adapter->adapter_bus_type == BLOGIC_ISA_BUS &&
1741 (void *) high_memory > (void *) MAX_DMA_ADDRESS)
1742 adapter->need_bouncebuf = true;
1743 /*
1744 BusLogic BT-445S Host Adapters prior to board revision E have a
1745 hardware bug whereby when the BIOS is enabled, transfers to/from
1746 the same address range the BIOS occupies modulo 16MB are handled
1747 incorrectly. Only properly functioning BT-445S Host Adapters
1748 have firmware version 3.37, so require that ISA Bounce Buffers
1749 be used for the buggy BT-445S models if there is more than 16MB
1750 memory.
1751 */
1752 if (adapter->bios_addr > 0 && strcmp(adapter->model, "BT-445S") == 0 &&
1753 strcmp(adapter->fw_ver, "3.37") < 0 &&
1754 (void *) high_memory > (void *) MAX_DMA_ADDRESS)
1755 adapter->need_bouncebuf = true;
1756 /*
1757 Initialize parameters common to MultiMaster and FlashPoint
1758 Host Adapters.
1759 */
1760 common:
1761 /*
1762 Initialize the Host Adapter Full Model Name from the Model Name.
1763 */
1764 strcpy(adapter->full_model, "BusLogic ");
1765 strcat(adapter->full_model, adapter->model);
1766 /*
1767 Select an appropriate value for the Tagged Queue Depth either from a
1768 BusLogic Driver Options specification, or based on whether this Host
1769 Adapter requires that ISA Bounce Buffers be used. The Tagged Queue
1770 Depth is left at 0 for automatic determination in
1771 BusLogic_SelectQueueDepths. Initialize the Untagged Queue Depth.
1772 */
1773 for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) {
1774 unsigned char qdepth = 0;
1775 if (adapter->drvr_opts != NULL &&
1776 adapter->drvr_opts->qdepth[tgt_id] > 0)
1777 qdepth = adapter->drvr_opts->qdepth[tgt_id];
1778 else if (adapter->need_bouncebuf)
1779 qdepth = BLOGIC_TAG_DEPTH_BB;
1780 adapter->qdepth[tgt_id] = qdepth;
1781 }
1782 if (adapter->need_bouncebuf)
1783 adapter->untag_qdepth = BLOGIC_UNTAG_DEPTH_BB;
1784 else
1785 adapter->untag_qdepth = BLOGIC_UNTAG_DEPTH;
1786 if (adapter->drvr_opts != NULL)
1787 adapter->common_qdepth = adapter->drvr_opts->common_qdepth;
1788 if (adapter->common_qdepth > 0 &&
1789 adapter->common_qdepth < adapter->untag_qdepth)
1790 adapter->untag_qdepth = adapter->common_qdepth;
1791 /*
1792 Tagged Queuing is only allowed if Disconnect/Reconnect is permitted.
1793 Therefore, mask the Tagged Queuing Permitted Default bits with the
1794 Disconnect/Reconnect Permitted bits.
1795 */
1796 adapter->tagq_ok &= adapter->discon_ok;
1797 /*
1798 Combine the default Tagged Queuing Permitted bits with any
1799 BusLogic Driver Options Tagged Queuing specification.
1800 */
1801 if (adapter->drvr_opts != NULL)
1802 adapter->tagq_ok = (adapter->drvr_opts->tagq_ok &
1803 adapter->drvr_opts->tagq_ok_mask) |
1804 (adapter->tagq_ok & ~adapter->drvr_opts->tagq_ok_mask);
1805
1806 /*
1807 Select an appropriate value for Bus Settle Time either from a
1808 BusLogic Driver Options specification, or from
1809 BLOGIC_BUS_SETTLE_TIME.
1810 */
1811 if (adapter->drvr_opts != NULL &&
1812 adapter->drvr_opts->bus_settle_time > 0)
1813 adapter->bus_settle_time = adapter->drvr_opts->bus_settle_time;
1814 else
1815 adapter->bus_settle_time = BLOGIC_BUS_SETTLE_TIME;
1816 /*
1817 Indicate reading the Host Adapter Configuration completed
1818 successfully.
1819 */
1820 return true;
1821 }
1822
1823
1824 /*
1825 blogic_reportconfig reports the configuration of Host Adapter.
1826 */
1827
1828 static bool __init blogic_reportconfig(struct blogic_adapter *adapter)
1829 {
1830 unsigned short alltgt_mask = (1 << adapter->maxdev) - 1;
1831 unsigned short sync_ok, fast_ok;
1832 unsigned short ultra_ok, wide_ok;
1833 unsigned short discon_ok, tagq_ok;
1834 bool common_syncneg, common_tagq_depth;
1835 char syncstr[BLOGIC_MAXDEV + 1];
1836 char widestr[BLOGIC_MAXDEV + 1];
1837 char discon_str[BLOGIC_MAXDEV + 1];
1838 char tagq_str[BLOGIC_MAXDEV + 1];
1839 char *syncmsg = syncstr;
1840 char *widemsg = widestr;
1841 char *discon_msg = discon_str;
1842 char *tagq_msg = tagq_str;
1843 int tgt_id;
1844
1845 blogic_info("Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n", adapter, adapter->model, blogic_adapter_busnames[adapter->adapter_bus_type], (adapter->wide ? " Wide" : ""), (adapter->differential ? " Differential" : ""), (adapter->ultra ? " Ultra" : ""));
1846 blogic_info(" Firmware Version: %s, I/O Address: 0x%X, " "IRQ Channel: %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch, (adapter->level_int ? "Level" : "Edge"));
1847 if (adapter->adapter_bus_type != BLOGIC_PCI_BUS) {
1848 blogic_info(" DMA Channel: ", adapter);
1849 if (adapter->dma_ch > 0)
1850 blogic_info("%d, ", adapter, adapter->dma_ch);
1851 else
1852 blogic_info("None, ", adapter);
1853 if (adapter->bios_addr > 0)
1854 blogic_info("BIOS Address: 0x%X, ", adapter,
1855 adapter->bios_addr);
1856 else
1857 blogic_info("BIOS Address: None, ", adapter);
1858 } else {
1859 blogic_info(" PCI Bus: %d, Device: %d, Address: ", adapter,
1860 adapter->bus, adapter->dev);
1861 if (adapter->pci_addr > 0)
1862 blogic_info("0x%X, ", adapter, adapter->pci_addr);
1863 else
1864 blogic_info("Unassigned, ", adapter);
1865 }
1866 blogic_info("Host Adapter SCSI ID: %d\n", adapter, adapter->scsi_id);
1867 blogic_info(" Parity Checking: %s, Extended Translation: %s\n",
1868 adapter, (adapter->parity ? "Enabled" : "Disabled"),
1869 (adapter->ext_trans_enable ? "Enabled" : "Disabled"));
1870 alltgt_mask &= ~(1 << adapter->scsi_id);
1871 sync_ok = adapter->sync_ok & alltgt_mask;
1872 fast_ok = adapter->fast_ok & alltgt_mask;
1873 ultra_ok = adapter->ultra_ok & alltgt_mask;
1874 if ((blogic_multimaster_type(adapter) &&
1875 (adapter->fw_ver[0] >= '4' ||
1876 adapter->adapter_bus_type == BLOGIC_EISA_BUS)) ||
1877 blogic_flashpoint_type(adapter)) {
1878 common_syncneg = false;
1879 if (sync_ok == 0) {
1880 syncmsg = "Disabled";
1881 common_syncneg = true;
1882 } else if (sync_ok == alltgt_mask) {
1883 if (fast_ok == 0) {
1884 syncmsg = "Slow";
1885 common_syncneg = true;
1886 } else if (fast_ok == alltgt_mask) {
1887 if (ultra_ok == 0) {
1888 syncmsg = "Fast";
1889 common_syncneg = true;
1890 } else if (ultra_ok == alltgt_mask) {
1891 syncmsg = "Ultra";
1892 common_syncneg = true;
1893 }
1894 }
1895 }
1896 if (!common_syncneg) {
1897 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
1898 syncstr[tgt_id] = ((!(sync_ok & (1 << tgt_id))) ? 'N' : (!(fast_ok & (1 << tgt_id)) ? 'S' : (!(ultra_ok & (1 << tgt_id)) ? 'F' : 'U')));
1899 syncstr[adapter->scsi_id] = '#';
1900 syncstr[adapter->maxdev] = '\0';
1901 }
1902 } else
1903 syncmsg = (sync_ok == 0 ? "Disabled" : "Enabled");
1904 wide_ok = adapter->wide_ok & alltgt_mask;
1905 if (wide_ok == 0)
1906 widemsg = "Disabled";
1907 else if (wide_ok == alltgt_mask)
1908 widemsg = "Enabled";
1909 else {
1910 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
1911 widestr[tgt_id] = ((wide_ok & (1 << tgt_id)) ? 'Y' : 'N');
1912 widestr[adapter->scsi_id] = '#';
1913 widestr[adapter->maxdev] = '\0';
1914 }
1915 discon_ok = adapter->discon_ok & alltgt_mask;
1916 if (discon_ok == 0)
1917 discon_msg = "Disabled";
1918 else if (discon_ok == alltgt_mask)
1919 discon_msg = "Enabled";
1920 else {
1921 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
1922 discon_str[tgt_id] = ((discon_ok & (1 << tgt_id)) ? 'Y' : 'N');
1923 discon_str[adapter->scsi_id] = '#';
1924 discon_str[adapter->maxdev] = '\0';
1925 }
1926 tagq_ok = adapter->tagq_ok & alltgt_mask;
1927 if (tagq_ok == 0)
1928 tagq_msg = "Disabled";
1929 else if (tagq_ok == alltgt_mask)
1930 tagq_msg = "Enabled";
1931 else {
1932 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
1933 tagq_str[tgt_id] = ((tagq_ok & (1 << tgt_id)) ? 'Y' : 'N');
1934 tagq_str[adapter->scsi_id] = '#';
1935 tagq_str[adapter->maxdev] = '\0';
1936 }
1937 blogic_info(" Synchronous Negotiation: %s, Wide Negotiation: %s\n",
1938 adapter, syncmsg, widemsg);
1939 blogic_info(" Disconnect/Reconnect: %s, Tagged Queuing: %s\n", adapter,
1940 discon_msg, tagq_msg);
1941 if (blogic_multimaster_type(adapter)) {
1942 blogic_info(" Scatter/Gather Limit: %d of %d segments, " "Mailboxes: %d\n", adapter, adapter->drvr_sglimit, adapter->adapter_sglimit, adapter->mbox_count);
1943 blogic_info(" Driver Queue Depth: %d, " "Host Adapter Queue Depth: %d\n", adapter, adapter->drvr_qdepth, adapter->adapter_qdepth);
1944 } else
1945 blogic_info(" Driver Queue Depth: %d, " "Scatter/Gather Limit: %d segments\n", adapter, adapter->drvr_qdepth, adapter->drvr_sglimit);
1946 blogic_info(" Tagged Queue Depth: ", adapter);
1947 common_tagq_depth = true;
1948 for (tgt_id = 1; tgt_id < adapter->maxdev; tgt_id++)
1949 if (adapter->qdepth[tgt_id] != adapter->qdepth[0]) {
1950 common_tagq_depth = false;
1951 break;
1952 }
1953 if (common_tagq_depth) {
1954 if (adapter->qdepth[0] > 0)
1955 blogic_info("%d", adapter, adapter->qdepth[0]);
1956 else
1957 blogic_info("Automatic", adapter);
1958 } else
1959 blogic_info("Individual", adapter);
1960 blogic_info(", Untagged Queue Depth: %d\n", adapter,
1961 adapter->untag_qdepth);
1962 if (adapter->terminfo_valid) {
1963 if (adapter->wide)
1964 blogic_info(" SCSI Bus Termination: %s", adapter,
1965 (adapter->low_term ? (adapter->high_term ? "Both Enabled" : "Low Enabled") : (adapter->high_term ? "High Enabled" : "Both Disabled")));
1966 else
1967 blogic_info(" SCSI Bus Termination: %s", adapter,
1968 (adapter->low_term ? "Enabled" : "Disabled"));
1969 if (adapter->scam)
1970 blogic_info(", SCAM: %s", adapter,
1971 (adapter->scam_enabled ? (adapter->scam_lev2 ? "Enabled, Level 2" : "Enabled, Level 1") : "Disabled"));
1972 blogic_info("\n", adapter);
1973 }
1974 /*
1975 Indicate reporting the Host Adapter configuration completed
1976 successfully.
1977 */
1978 return true;
1979 }
1980
1981
1982 /*
1983 blogic_getres acquires the system resources necessary to use
1984 Host Adapter.
1985 */
1986
1987 static bool __init blogic_getres(struct blogic_adapter *adapter)
1988 {
1989 if (adapter->irq_ch == 0) {
1990 blogic_err("NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n",
1991 adapter);
1992 return false;
1993 }
1994 /*
1995 Acquire shared access to the IRQ Channel.
1996 */
1997 if (request_irq(adapter->irq_ch, blogic_inthandler, IRQF_SHARED,
1998 adapter->full_model, adapter) < 0) {
1999 blogic_err("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n",
2000 adapter, adapter->irq_ch);
2001 return false;
2002 }
2003 adapter->irq_acquired = true;
2004 /*
2005 Acquire exclusive access to the DMA Channel.
2006 */
2007 if (adapter->dma_ch > 0) {
2008 if (request_dma(adapter->dma_ch, adapter->full_model) < 0) {
2009 blogic_err("UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n", adapter, adapter->dma_ch);
2010 return false;
2011 }
2012 set_dma_mode(adapter->dma_ch, DMA_MODE_CASCADE);
2013 enable_dma(adapter->dma_ch);
2014 adapter->dma_chan_acquired = true;
2015 }
2016 /*
2017 Indicate the System Resource Acquisition completed successfully,
2018 */
2019 return true;
2020 }
2021
2022
2023 /*
2024 blogic_relres releases any system resources previously acquired
2025 by blogic_getres.
2026 */
2027
2028 static void blogic_relres(struct blogic_adapter *adapter)
2029 {
2030 /*
2031 Release shared access to the IRQ Channel.
2032 */
2033 if (adapter->irq_acquired)
2034 free_irq(adapter->irq_ch, adapter);
2035 /*
2036 Release exclusive access to the DMA Channel.
2037 */
2038 if (adapter->dma_chan_acquired)
2039 free_dma(adapter->dma_ch);
2040 /*
2041 Release any allocated memory structs not released elsewhere
2042 */
2043 if (adapter->mbox_space)
2044 dma_free_coherent(&adapter->pci_device->dev, adapter->mbox_sz,
2045 adapter->mbox_space, adapter->mbox_space_handle);
2046 pci_dev_put(adapter->pci_device);
2047 adapter->mbox_space = NULL;
2048 adapter->mbox_space_handle = 0;
2049 adapter->mbox_sz = 0;
2050 }
2051
2052
2053 /*
2054 blogic_initadapter initializes Host Adapter. This is the only
2055 function called during SCSI Host Adapter detection which modifies the state
2056 of the Host Adapter from its initial power on or hard reset state.
2057 */
2058
2059 static bool blogic_initadapter(struct blogic_adapter *adapter)
2060 {
2061 struct blogic_extmbox_req extmbox_req;
2062 enum blogic_rr_req rr_req;
2063 enum blogic_setccb_fmt setccb_fmt;
2064 int tgt_id;
2065
2066 /*
2067 Initialize the pointers to the first and last CCBs that are
2068 queued for completion processing.
2069 */
2070 adapter->firstccb = NULL;
2071 adapter->lastccb = NULL;
2072
2073 /*
2074 Initialize the Bus Device Reset Pending CCB, Tagged Queuing Active,
2075 Command Successful Flag, Active Commands, and Commands Since Reset
2076 for each Target Device.
2077 */
2078 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) {
2079 adapter->bdr_pend[tgt_id] = NULL;
2080 adapter->tgt_flags[tgt_id].tagq_active = false;
2081 adapter->tgt_flags[tgt_id].cmd_good = false;
2082 adapter->active_cmds[tgt_id] = 0;
2083 adapter->cmds_since_rst[tgt_id] = 0;
2084 }
2085
2086 /*
2087 FlashPoint Host Adapters do not use Outgoing and Incoming Mailboxes.
2088 */
2089 if (blogic_flashpoint_type(adapter))
2090 goto done;
2091
2092 /*
2093 Initialize the Outgoing and Incoming Mailbox pointers.
2094 */
2095 adapter->mbox_sz = adapter->mbox_count * (sizeof(struct blogic_outbox) + sizeof(struct blogic_inbox));
2096 adapter->mbox_space = dma_alloc_coherent(&adapter->pci_device->dev,
2097 adapter->mbox_sz, &adapter->mbox_space_handle,
2098 GFP_KERNEL);
2099 if (adapter->mbox_space == NULL)
2100 return blogic_failure(adapter, "MAILBOX ALLOCATION");
2101 adapter->first_outbox = (struct blogic_outbox *) adapter->mbox_space;
2102 adapter->last_outbox = adapter->first_outbox + adapter->mbox_count - 1;
2103 adapter->next_outbox = adapter->first_outbox;
2104 adapter->first_inbox = (struct blogic_inbox *) (adapter->last_outbox + 1);
2105 adapter->last_inbox = adapter->first_inbox + adapter->mbox_count - 1;
2106 adapter->next_inbox = adapter->first_inbox;
2107
2108 /*
2109 Initialize the Outgoing and Incoming Mailbox structures.
2110 */
2111 memset(adapter->first_outbox, 0,
2112 adapter->mbox_count * sizeof(struct blogic_outbox));
2113 memset(adapter->first_inbox, 0,
2114 adapter->mbox_count * sizeof(struct blogic_inbox));
2115
2116 /*
2117 Initialize the Host Adapter's Pointer to the Outgoing/Incoming
2118 Mailboxes.
2119 */
2120 extmbox_req.mbox_count = adapter->mbox_count;
2121 extmbox_req.base_mbox_addr = (u32) adapter->mbox_space_handle;
2122 if (blogic_cmd(adapter, BLOGIC_INIT_EXT_MBOX, &extmbox_req,
2123 sizeof(extmbox_req), NULL, 0) < 0)
2124 return blogic_failure(adapter, "MAILBOX INITIALIZATION");
2125 /*
2126 Enable Strict Round Robin Mode if supported by the Host Adapter. In
2127 Strict Round Robin Mode, the Host Adapter only looks at the next
2128 Outgoing Mailbox for each new command, rather than scanning
2129 through all the Outgoing Mailboxes to find any that have new
2130 commands in them. Strict Round Robin Mode is significantly more
2131 efficient.
2132 */
2133 if (adapter->strict_rr) {
2134 rr_req = BLOGIC_STRICT_RR_MODE;
2135 if (blogic_cmd(adapter, BLOGIC_STRICT_RR, &rr_req,
2136 sizeof(rr_req), NULL, 0) < 0)
2137 return blogic_failure(adapter,
2138 "ENABLE STRICT ROUND ROBIN MODE");
2139 }
2140
2141 /*
2142 For Host Adapters that support Extended LUN Format CCBs, issue the
2143 Set CCB Format command to allow 32 Logical Units per Target Device.
2144 */
2145 if (adapter->ext_lun) {
2146 setccb_fmt = BLOGIC_EXT_LUN_CCB;
2147 if (blogic_cmd(adapter, BLOGIC_SETCCB_FMT, &setccb_fmt,
2148 sizeof(setccb_fmt), NULL, 0) < 0)
2149 return blogic_failure(adapter, "SET CCB FORMAT");
2150 }
2151
2152 /*
2153 Announce Successful Initialization.
2154 */
2155 done:
2156 if (!adapter->adapter_initd) {
2157 blogic_info("*** %s Initialized Successfully ***\n", adapter,
2158 adapter->full_model);
2159 blogic_info("\n", adapter);
2160 } else
2161 blogic_warn("*** %s Initialized Successfully ***\n", adapter,
2162 adapter->full_model);
2163 adapter->adapter_initd = true;
2164
2165 /*
2166 Indicate the Host Adapter Initialization completed successfully.
2167 */
2168 return true;
2169 }
2170
2171
2172 /*
2173 blogic_inquiry inquires about the Target Devices accessible
2174 through Host Adapter.
2175 */
2176
2177 static bool __init blogic_inquiry(struct blogic_adapter *adapter)
2178 {
2179 u16 installed_devs;
2180 u8 installed_devs0to7[8];
2181 struct blogic_setup_info setupinfo;
2182 u8 sync_period[BLOGIC_MAXDEV];
2183 unsigned char req_replylen;
2184 int tgt_id;
2185
2186 /*
2187 Wait a few seconds between the Host Adapter Hard Reset which
2188 initiates a SCSI Bus Reset and issuing any SCSI Commands. Some
2189 SCSI devices get confused if they receive SCSI Commands too soon
2190 after a SCSI Bus Reset.
2191 */
2192 blogic_delay(adapter->bus_settle_time);
2193 /*
2194 FlashPoint Host Adapters do not provide for Target Device Inquiry.
2195 */
2196 if (blogic_flashpoint_type(adapter))
2197 return true;
2198 /*
2199 Inhibit the Target Device Inquiry if requested.
2200 */
2201 if (adapter->drvr_opts != NULL && adapter->drvr_opts->stop_tgt_inquiry)
2202 return true;
2203 /*
2204 Issue the Inquire Target Devices command for host adapters with
2205 firmware version 4.25 or later, or the Inquire Installed Devices
2206 ID 0 to 7 command for older host adapters. This is necessary to
2207 force Synchronous Transfer Negotiation so that the Inquire Setup
2208 Information and Inquire Synchronous Period commands will return
2209 valid data. The Inquire Target Devices command is preferable to
2210 Inquire Installed Devices ID 0 to 7 since it only probes Logical
2211 Unit 0 of each Target Device.
2212 */
2213 if (strcmp(adapter->fw_ver, "4.25") >= 0) {
2214
2215 /*
2216 Issue a Inquire Target Devices command. Inquire Target
2217 Devices only tests Logical Unit 0 of each Target Device
2218 unlike the Inquire Installed Devices commands which test
2219 Logical Units 0 - 7. Two bytes are returned, where byte
2220 0 bit 0 set indicates that Target Device 0 exists, and so on.
2221 */
2222
2223 if (blogic_cmd(adapter, BLOGIC_INQ_DEV, NULL, 0,
2224 &installed_devs, sizeof(installed_devs))
2225 != sizeof(installed_devs))
2226 return blogic_failure(adapter, "INQUIRE TARGET DEVICES");
2227 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2228 adapter->tgt_flags[tgt_id].tgt_exists =
2229 (installed_devs & (1 << tgt_id) ? true : false);
2230 } else {
2231
2232 /*
2233 Issue an Inquire Installed Devices command. For each
2234 Target Device, a byte is returned where bit 0 set
2235 indicates that Logical Unit 0 * exists, bit 1 set
2236 indicates that Logical Unit 1 exists, and so on.
2237 */
2238
2239 if (blogic_cmd(adapter, BLOGIC_INQ_DEV0TO7, NULL, 0,
2240 &installed_devs0to7, sizeof(installed_devs0to7))
2241 != sizeof(installed_devs0to7))
2242 return blogic_failure(adapter,
2243 "INQUIRE INSTALLED DEVICES ID 0 TO 7");
2244 for (tgt_id = 0; tgt_id < 8; tgt_id++)
2245 adapter->tgt_flags[tgt_id].tgt_exists =
2246 (installed_devs0to7[tgt_id] != 0 ? true : false);
2247 }
2248 /*
2249 Issue the Inquire Setup Information command.
2250 */
2251 req_replylen = sizeof(setupinfo);
2252 if (blogic_cmd(adapter, BLOGIC_INQ_SETUPINFO, &req_replylen,
2253 sizeof(req_replylen), &setupinfo, sizeof(setupinfo))
2254 != sizeof(setupinfo))
2255 return blogic_failure(adapter, "INQUIRE SETUP INFORMATION");
2256 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2257 adapter->sync_offset[tgt_id] = (tgt_id < 8 ? setupinfo.sync0to7[tgt_id].offset : setupinfo.sync8to15[tgt_id - 8].offset);
2258 if (strcmp(adapter->fw_ver, "5.06L") >= 0)
2259 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2260 adapter->tgt_flags[tgt_id].wide_active = (tgt_id < 8 ? (setupinfo.wide_tx_active0to7 & (1 << tgt_id) ? true : false) : (setupinfo.wide_tx_active8to15 & (1 << (tgt_id - 8)) ? true : false));
2261 /*
2262 Issue the Inquire Synchronous Period command.
2263 */
2264 if (adapter->fw_ver[0] >= '3') {
2265
2266 /* Issue a Inquire Synchronous Period command. For each
2267 Target Device, a byte is returned which represents the
2268 Synchronous Transfer Period in units of 10 nanoseconds.
2269 */
2270
2271 req_replylen = sizeof(sync_period);
2272 if (blogic_cmd(adapter, BLOGIC_INQ_SYNC_PERIOD, &req_replylen,
2273 sizeof(req_replylen), &sync_period,
2274 sizeof(sync_period)) != sizeof(sync_period))
2275 return blogic_failure(adapter,
2276 "INQUIRE SYNCHRONOUS PERIOD");
2277 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2278 adapter->sync_period[tgt_id] = sync_period[tgt_id];
2279 } else
2280 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2281 if (setupinfo.sync0to7[tgt_id].offset > 0)
2282 adapter->sync_period[tgt_id] = 20 + 5 * setupinfo.sync0to7[tgt_id].tx_period;
2283 /*
2284 Indicate the Target Device Inquiry completed successfully.
2285 */
2286 return true;
2287 }
2288
2289 /*
2290 blogic_inithoststruct initializes the fields in the SCSI Host
2291 structure. The base, io_port, n_io_ports, irq, and dma_channel fields in the
2292 SCSI Host structure are intentionally left uninitialized, as this driver
2293 handles acquisition and release of these resources explicitly, as well as
2294 ensuring exclusive access to the Host Adapter hardware and data structures
2295 through explicit acquisition and release of the Host Adapter's Lock.
2296 */
2297
2298 static void __init blogic_inithoststruct(struct blogic_adapter *adapter,
2299 struct Scsi_Host *host)
2300 {
2301 host->max_id = adapter->maxdev;
2302 host->max_lun = adapter->maxlun;
2303 host->max_channel = 0;
2304 host->unique_id = adapter->io_addr;
2305 host->this_id = adapter->scsi_id;
2306 host->can_queue = adapter->drvr_qdepth;
2307 host->sg_tablesize = adapter->drvr_sglimit;
2308 host->unchecked_isa_dma = adapter->need_bouncebuf;
2309 host->cmd_per_lun = adapter->untag_qdepth;
2310 }
2311
2312 /*
2313 blogic_slaveconfig will actually set the queue depth on individual
2314 scsi devices as they are permanently added to the device chain. We
2315 shamelessly rip off the SelectQueueDepths code to make this work mostly
2316 like it used to. Since we don't get called once at the end of the scan
2317 but instead get called for each device, we have to do things a bit
2318 differently.
2319 */
2320 static int blogic_slaveconfig(struct scsi_device *dev)
2321 {
2322 struct blogic_adapter *adapter =
2323 (struct blogic_adapter *) dev->host->hostdata;
2324 int tgt_id = dev->id;
2325 int qdepth = adapter->qdepth[tgt_id];
2326
2327 if (adapter->tgt_flags[tgt_id].tagq_ok &&
2328 (adapter->tagq_ok & (1 << tgt_id))) {
2329 if (qdepth == 0)
2330 qdepth = BLOGIC_MAX_AUTO_TAG_DEPTH;
2331 adapter->qdepth[tgt_id] = qdepth;
2332 scsi_change_queue_depth(dev, qdepth);
2333 } else {
2334 adapter->tagq_ok &= ~(1 << tgt_id);
2335 qdepth = adapter->untag_qdepth;
2336 adapter->qdepth[tgt_id] = qdepth;
2337 scsi_change_queue_depth(dev, qdepth);
2338 }
2339 qdepth = 0;
2340 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
2341 if (adapter->tgt_flags[tgt_id].tgt_exists)
2342 qdepth += adapter->qdepth[tgt_id];
2343 if (qdepth > adapter->alloc_ccbs)
2344 blogic_create_addlccbs(adapter, qdepth - adapter->alloc_ccbs,
2345 false);
2346 return 0;
2347 }
2348
2349 /*
2350 blogic_init probes for BusLogic Host Adapters at the standard
2351 I/O Addresses where they may be located, initializing, registering, and
2352 reporting the configuration of each BusLogic Host Adapter it finds. It
2353 returns the number of BusLogic Host Adapters successfully initialized and
2354 registered.
2355 */
2356
2357 static int __init blogic_init(void)
2358 {
2359 int adapter_count = 0, drvr_optindex = 0, probeindex;
2360 struct blogic_adapter *adapter;
2361 int ret = 0;
2362
2363 #ifdef MODULE
2364 if (BusLogic)
2365 blogic_setup(BusLogic);
2366 #endif
2367
2368 if (blogic_probe_options.noprobe)
2369 return -ENODEV;
2370 blogic_probeinfo_list =
2371 kcalloc(BLOGIC_MAX_ADAPTERS, sizeof(struct blogic_probeinfo),
2372 GFP_KERNEL);
2373 if (blogic_probeinfo_list == NULL) {
2374 blogic_err("BusLogic: Unable to allocate Probe Info List\n",
2375 NULL);
2376 return -ENOMEM;
2377 }
2378
2379 adapter = kzalloc(sizeof(struct blogic_adapter), GFP_KERNEL);
2380 if (adapter == NULL) {
2381 kfree(blogic_probeinfo_list);
2382 blogic_err("BusLogic: Unable to allocate Prototype Host Adapter\n", NULL);
2383 return -ENOMEM;
2384 }
2385
2386 #ifdef MODULE
2387 if (BusLogic != NULL)
2388 blogic_setup(BusLogic);
2389 #endif
2390 blogic_init_probeinfo_list(adapter);
2391 for (probeindex = 0; probeindex < blogic_probeinfo_count; probeindex++) {
2392 struct blogic_probeinfo *probeinfo =
2393 &blogic_probeinfo_list[probeindex];
2394 struct blogic_adapter *myadapter = adapter;
2395 struct Scsi_Host *host;
2396
2397 if (probeinfo->io_addr == 0)
2398 continue;
2399 memset(myadapter, 0, sizeof(struct blogic_adapter));
2400 myadapter->adapter_type = probeinfo->adapter_type;
2401 myadapter->adapter_bus_type = probeinfo->adapter_bus_type;
2402 myadapter->io_addr = probeinfo->io_addr;
2403 myadapter->pci_addr = probeinfo->pci_addr;
2404 myadapter->bus = probeinfo->bus;
2405 myadapter->dev = probeinfo->dev;
2406 myadapter->pci_device = probeinfo->pci_device;
2407 myadapter->irq_ch = probeinfo->irq_ch;
2408 myadapter->addr_count =
2409 blogic_adapter_addr_count[myadapter->adapter_type];
2410
2411 /*
2412 Make sure region is free prior to probing.
2413 */
2414 if (!request_region(myadapter->io_addr, myadapter->addr_count,
2415 "BusLogic"))
2416 continue;
2417 /*
2418 Probe the Host Adapter. If unsuccessful, abort further
2419 initialization.
2420 */
2421 if (!blogic_probe(myadapter)) {
2422 release_region(myadapter->io_addr,
2423 myadapter->addr_count);
2424 continue;
2425 }
2426 /*
2427 Hard Reset the Host Adapter. If unsuccessful, abort further
2428 initialization.
2429 */
2430 if (!blogic_hwreset(myadapter, true)) {
2431 release_region(myadapter->io_addr,
2432 myadapter->addr_count);
2433 continue;
2434 }
2435 /*
2436 Check the Host Adapter. If unsuccessful, abort further
2437 initialization.
2438 */
2439 if (!blogic_checkadapter(myadapter)) {
2440 release_region(myadapter->io_addr,
2441 myadapter->addr_count);
2442 continue;
2443 }
2444 /*
2445 Initialize the Driver Options field if provided.
2446 */
2447 if (drvr_optindex < blogic_drvr_options_count)
2448 myadapter->drvr_opts =
2449 &blogic_drvr_options[drvr_optindex++];
2450 /*
2451 Announce the Driver Version and Date, Author's Name,
2452 Copyright Notice, and Electronic Mail Address.
2453 */
2454 blogic_announce_drvr(myadapter);
2455 /*
2456 Register the SCSI Host structure.
2457 */
2458
2459 host = scsi_host_alloc(&blogic_template,
2460 sizeof(struct blogic_adapter));
2461 if (host == NULL) {
2462 release_region(myadapter->io_addr,
2463 myadapter->addr_count);
2464 continue;
2465 }
2466 myadapter = (struct blogic_adapter *) host->hostdata;
2467 memcpy(myadapter, adapter, sizeof(struct blogic_adapter));
2468 myadapter->scsi_host = host;
2469 myadapter->host_no = host->host_no;
2470 /*
2471 Add Host Adapter to the end of the list of registered
2472 BusLogic Host Adapters.
2473 */
2474 list_add_tail(&myadapter->host_list, &blogic_host_list);
2475
2476 /*
2477 Read the Host Adapter Configuration, Configure the Host
2478 Adapter, Acquire the System Resources necessary to use
2479 the Host Adapter, then Create the Initial CCBs, Initialize
2480 the Host Adapter, and finally perform Target Device
2481 Inquiry. From this point onward, any failure will be
2482 assumed to be due to a problem with the Host Adapter,
2483 rather than due to having mistakenly identified this port
2484 as belonging to a BusLogic Host Adapter. The I/O Address
2485 range will not be released, thereby preventing it from
2486 being incorrectly identified as any other type of Host
2487 Adapter.
2488 */
2489 if (blogic_rdconfig(myadapter) &&
2490 blogic_reportconfig(myadapter) &&
2491 blogic_getres(myadapter) &&
2492 blogic_create_initccbs(myadapter) &&
2493 blogic_initadapter(myadapter) &&
2494 blogic_inquiry(myadapter)) {
2495 /*
2496 Initialization has been completed successfully.
2497 Release and re-register usage of the I/O Address
2498 range so that the Model Name of the Host Adapter
2499 will appear, and initialize the SCSI Host structure.
2500 */
2501 release_region(myadapter->io_addr,
2502 myadapter->addr_count);
2503 if (!request_region(myadapter->io_addr,
2504 myadapter->addr_count,
2505 myadapter->full_model)) {
2506 printk(KERN_WARNING
2507 "BusLogic: Release and re-register of "
2508 "port 0x%04lx failed \n",
2509 (unsigned long)myadapter->io_addr);
2510 blogic_destroy_ccbs(myadapter);
2511 blogic_relres(myadapter);
2512 list_del(&myadapter->host_list);
2513 scsi_host_put(host);
2514 ret = -ENOMEM;
2515 } else {
2516 blogic_inithoststruct(myadapter,
2517 host);
2518 if (scsi_add_host(host, myadapter->pci_device
2519 ? &myadapter->pci_device->dev
2520 : NULL)) {
2521 printk(KERN_WARNING
2522 "BusLogic: scsi_add_host()"
2523 "failed!\n");
2524 blogic_destroy_ccbs(myadapter);
2525 blogic_relres(myadapter);
2526 list_del(&myadapter->host_list);
2527 scsi_host_put(host);
2528 ret = -ENODEV;
2529 } else {
2530 scsi_scan_host(host);
2531 adapter_count++;
2532 }
2533 }
2534 } else {
2535 /*
2536 An error occurred during Host Adapter Configuration
2537 Querying, Host Adapter Configuration, Resource
2538 Acquisition, CCB Creation, Host Adapter
2539 Initialization, or Target Device Inquiry, so
2540 remove Host Adapter from the list of registered
2541 BusLogic Host Adapters, destroy the CCBs, Release
2542 the System Resources, and Unregister the SCSI
2543 Host.
2544 */
2545 blogic_destroy_ccbs(myadapter);
2546 blogic_relres(myadapter);
2547 list_del(&myadapter->host_list);
2548 scsi_host_put(host);
2549 ret = -ENODEV;
2550 }
2551 }
2552 kfree(adapter);
2553 kfree(blogic_probeinfo_list);
2554 blogic_probeinfo_list = NULL;
2555 return ret;
2556 }
2557
2558
2559 /*
2560 blogic_deladapter releases all resources previously acquired to
2561 support a specific Host Adapter, including the I/O Address range, and
2562 unregisters the BusLogic Host Adapter.
2563 */
2564
2565 static int __exit blogic_deladapter(struct blogic_adapter *adapter)
2566 {
2567 struct Scsi_Host *host = adapter->scsi_host;
2568
2569 scsi_remove_host(host);
2570
2571 /*
2572 FlashPoint Host Adapters must first be released by the FlashPoint
2573 SCCB Manager.
2574 */
2575 if (blogic_flashpoint_type(adapter))
2576 FlashPoint_ReleaseHostAdapter(adapter->cardhandle);
2577 /*
2578 Destroy the CCBs and release any system resources acquired to
2579 support Host Adapter.
2580 */
2581 blogic_destroy_ccbs(adapter);
2582 blogic_relres(adapter);
2583 /*
2584 Release usage of the I/O Address range.
2585 */
2586 release_region(adapter->io_addr, adapter->addr_count);
2587 /*
2588 Remove Host Adapter from the list of registered BusLogic
2589 Host Adapters.
2590 */
2591 list_del(&adapter->host_list);
2592
2593 scsi_host_put(host);
2594 return 0;
2595 }
2596
2597
2598 /*
2599 blogic_qcompleted_ccb queues CCB for completion processing.
2600 */
2601
2602 static void blogic_qcompleted_ccb(struct blogic_ccb *ccb)
2603 {
2604 struct blogic_adapter *adapter = ccb->adapter;
2605
2606 ccb->status = BLOGIC_CCB_COMPLETE;
2607 ccb->next = NULL;
2608 if (adapter->firstccb == NULL) {
2609 adapter->firstccb = ccb;
2610 adapter->lastccb = ccb;
2611 } else {
2612 adapter->lastccb->next = ccb;
2613 adapter->lastccb = ccb;
2614 }
2615 adapter->active_cmds[ccb->tgt_id]--;
2616 }
2617
2618
2619 /*
2620 blogic_resultcode computes a SCSI Subsystem Result Code from
2621 the Host Adapter Status and Target Device Status.
2622 */
2623
2624 static int blogic_resultcode(struct blogic_adapter *adapter,
2625 enum blogic_adapter_status adapter_status,
2626 enum blogic_tgt_status tgt_status)
2627 {
2628 int hoststatus;
2629
2630 switch (adapter_status) {
2631 case BLOGIC_CMD_CMPLT_NORMAL:
2632 case BLOGIC_LINK_CMD_CMPLT:
2633 case BLOGIC_LINK_CMD_CMPLT_FLAG:
2634 hoststatus = DID_OK;
2635 break;
2636 case BLOGIC_SELECT_TIMEOUT:
2637 hoststatus = DID_TIME_OUT;
2638 break;
2639 case BLOGIC_INVALID_OUTBOX_CODE:
2640 case BLOGIC_INVALID_CMD_CODE:
2641 case BLOGIC_BAD_CMD_PARAM:
2642 blogic_warn("BusLogic Driver Protocol Error 0x%02X\n",
2643 adapter, adapter_status);
2644 /* fall through */
2645 case BLOGIC_DATA_UNDERRUN:
2646 case BLOGIC_DATA_OVERRUN:
2647 case BLOGIC_NOEXPECT_BUSFREE:
2648 case BLOGIC_LINKCCB_BADLUN:
2649 case BLOGIC_AUTOREQSENSE_FAIL:
2650 case BLOGIC_TAGQUEUE_REJECT:
2651 case BLOGIC_BAD_MSG_RCVD:
2652 case BLOGIC_HW_FAIL:
2653 case BLOGIC_BAD_RECONNECT:
2654 case BLOGIC_ABRT_QUEUE:
2655 case BLOGIC_ADAPTER_SW_ERROR:
2656 case BLOGIC_HW_TIMEOUT:
2657 case BLOGIC_PARITY_ERR:
2658 hoststatus = DID_ERROR;
2659 break;
2660 case BLOGIC_INVALID_BUSPHASE:
2661 case BLOGIC_NORESPONSE_TO_ATN:
2662 case BLOGIC_HW_RESET:
2663 case BLOGIC_RST_FROM_OTHERDEV:
2664 case BLOGIC_HW_BDR:
2665 hoststatus = DID_RESET;
2666 break;
2667 default:
2668 blogic_warn("Unknown Host Adapter Status 0x%02X\n", adapter,
2669 adapter_status);
2670 hoststatus = DID_ERROR;
2671 break;
2672 }
2673 return (hoststatus << 16) | tgt_status;
2674 }
2675
2676
2677 /*
2678 blogic_scan_inbox scans the Incoming Mailboxes saving any
2679 Incoming Mailbox entries for completion processing.
2680 */
2681
2682 static void blogic_scan_inbox(struct blogic_adapter *adapter)
2683 {
2684 /*
2685 Scan through the Incoming Mailboxes in Strict Round Robin
2686 fashion, saving any completed CCBs for further processing. It
2687 is essential that for each CCB and SCSI Command issued, command
2688 completion processing is performed exactly once. Therefore,
2689 only Incoming Mailboxes with completion code Command Completed
2690 Without Error, Command Completed With Error, or Command Aborted
2691 At Host Request are saved for completion processing. When an
2692 Incoming Mailbox has a completion code of Aborted Command Not
2693 Found, the CCB had already completed or been aborted before the
2694 current Abort request was processed, and so completion processing
2695 has already occurred and no further action should be taken.
2696 */
2697 struct blogic_inbox *next_inbox = adapter->next_inbox;
2698 enum blogic_cmplt_code comp_code;
2699
2700 while ((comp_code = next_inbox->comp_code) != BLOGIC_INBOX_FREE) {
2701 /*
2702 We are only allowed to do this because we limit our
2703 architectures we run on to machines where bus_to_virt(
2704 actually works. There *needs* to be a dma_addr_to_virt()
2705 in the new PCI DMA mapping interface to replace
2706 bus_to_virt() or else this code is going to become very
2707 innefficient.
2708 */
2709 struct blogic_ccb *ccb =
2710 (struct blogic_ccb *) bus_to_virt(next_inbox->ccb);
2711 if (comp_code != BLOGIC_CMD_NOTFOUND) {
2712 if (ccb->status == BLOGIC_CCB_ACTIVE ||
2713 ccb->status == BLOGIC_CCB_RESET) {
2714 /*
2715 Save the Completion Code for this CCB and
2716 queue the CCB for completion processing.
2717 */
2718 ccb->comp_code = comp_code;
2719 blogic_qcompleted_ccb(ccb);
2720 } else {
2721 /*
2722 If a CCB ever appears in an Incoming Mailbox
2723 and is not marked as status Active or Reset,
2724 then there is most likely a bug in
2725 the Host Adapter firmware.
2726 */
2727 blogic_warn("Illegal CCB #%ld status %d in " "Incoming Mailbox\n", adapter, ccb->serial, ccb->status);
2728 }
2729 }
2730 next_inbox->comp_code = BLOGIC_INBOX_FREE;
2731 if (++next_inbox > adapter->last_inbox)
2732 next_inbox = adapter->first_inbox;
2733 }
2734 adapter->next_inbox = next_inbox;
2735 }
2736
2737
2738 /*
2739 blogic_process_ccbs iterates over the completed CCBs for Host
2740 Adapter setting the SCSI Command Result Codes, deallocating the CCBs, and
2741 calling the SCSI Subsystem Completion Routines. The Host Adapter's Lock
2742 should already have been acquired by the caller.
2743 */
2744
2745 static void blogic_process_ccbs(struct blogic_adapter *adapter)
2746 {
2747 if (adapter->processing_ccbs)
2748 return;
2749 adapter->processing_ccbs = true;
2750 while (adapter->firstccb != NULL) {
2751 struct blogic_ccb *ccb = adapter->firstccb;
2752 struct scsi_cmnd *command = ccb->command;
2753 adapter->firstccb = ccb->next;
2754 if (adapter->firstccb == NULL)
2755 adapter->lastccb = NULL;
2756 /*
2757 Process the Completed CCB.
2758 */
2759 if (ccb->opcode == BLOGIC_BDR) {
2760 int tgt_id = ccb->tgt_id;
2761
2762 blogic_warn("Bus Device Reset CCB #%ld to Target " "%d Completed\n", adapter, ccb->serial, tgt_id);
2763 blogic_inc_count(&adapter->tgt_stats[tgt_id].bdr_done);
2764 adapter->tgt_flags[tgt_id].tagq_active = false;
2765 adapter->cmds_since_rst[tgt_id] = 0;
2766 adapter->last_resetdone[tgt_id] = jiffies;
2767 /*
2768 Place CCB back on the Host Adapter's free list.
2769 */
2770 blogic_dealloc_ccb(ccb, 1);
2771 #if 0 /* this needs to be redone different for new EH */
2772 /*
2773 Bus Device Reset CCBs have the command field
2774 non-NULL only when a Bus Device Reset was requested
2775 for a command that did not have a currently active
2776 CCB in the Host Adapter (i.e., a Synchronous Bus
2777 Device Reset), and hence would not have its
2778 Completion Routine called otherwise.
2779 */
2780 while (command != NULL) {
2781 struct scsi_cmnd *nxt_cmd =
2782 command->reset_chain;
2783 command->reset_chain = NULL;
2784 command->result = DID_RESET << 16;
2785 command->scsi_done(command);
2786 command = nxt_cmd;
2787 }
2788 #endif
2789 /*
2790 Iterate over the CCBs for this Host Adapter
2791 performing completion processing for any CCBs
2792 marked as Reset for this Target.
2793 */
2794 for (ccb = adapter->all_ccbs; ccb != NULL;
2795 ccb = ccb->next_all)
2796 if (ccb->status == BLOGIC_CCB_RESET &&
2797 ccb->tgt_id == tgt_id) {
2798 command = ccb->command;
2799 blogic_dealloc_ccb(ccb, 1);
2800 adapter->active_cmds[tgt_id]--;
2801 command->result = DID_RESET << 16;
2802 command->scsi_done(command);
2803 }
2804 adapter->bdr_pend[tgt_id] = NULL;
2805 } else {
2806 /*
2807 Translate the Completion Code, Host Adapter Status,
2808 and Target Device Status into a SCSI Subsystem
2809 Result Code.
2810 */
2811 switch (ccb->comp_code) {
2812 case BLOGIC_INBOX_FREE:
2813 case BLOGIC_CMD_NOTFOUND:
2814 case BLOGIC_INVALID_CCB:
2815 blogic_warn("CCB #%ld to Target %d Impossible State\n", adapter, ccb->serial, ccb->tgt_id);
2816 break;
2817 case BLOGIC_CMD_COMPLETE_GOOD:
2818 adapter->tgt_stats[ccb->tgt_id]
2819 .cmds_complete++;
2820 adapter->tgt_flags[ccb->tgt_id]
2821 .cmd_good = true;
2822 command->result = DID_OK << 16;
2823 break;
2824 case BLOGIC_CMD_ABORT_BY_HOST:
2825 blogic_warn("CCB #%ld to Target %d Aborted\n",
2826 adapter, ccb->serial, ccb->tgt_id);
2827 blogic_inc_count(&adapter->tgt_stats[ccb->tgt_id].aborts_done);
2828 command->result = DID_ABORT << 16;
2829 break;
2830 case BLOGIC_CMD_COMPLETE_ERROR:
2831 command->result = blogic_resultcode(adapter,
2832 ccb->adapter_status, ccb->tgt_status);
2833 if (ccb->adapter_status != BLOGIC_SELECT_TIMEOUT) {
2834 adapter->tgt_stats[ccb->tgt_id]
2835 .cmds_complete++;
2836 if (blogic_global_options.trace_err) {
2837 int i;
2838 blogic_notice("CCB #%ld Target %d: Result %X Host "
2839 "Adapter Status %02X " "Target Status %02X\n", adapter, ccb->serial, ccb->tgt_id, command->result, ccb->adapter_status, ccb->tgt_status);
2840 blogic_notice("CDB ", adapter);
2841 for (i = 0; i < ccb->cdblen; i++)
2842 blogic_notice(" %02X", adapter, ccb->cdb[i]);
2843 blogic_notice("\n", adapter);
2844 blogic_notice("Sense ", adapter);
2845 for (i = 0; i < ccb->sense_datalen; i++)
2846 blogic_notice(" %02X", adapter, command->sense_buffer[i]);
2847 blogic_notice("\n", adapter);
2848 }
2849 }
2850 break;
2851 }
2852 /*
2853 When an INQUIRY command completes normally, save the
2854 CmdQue (Tagged Queuing Supported) and WBus16 (16 Bit
2855 Wide Data Transfers Supported) bits.
2856 */
2857 if (ccb->cdb[0] == INQUIRY && ccb->cdb[1] == 0 &&
2858 ccb->adapter_status == BLOGIC_CMD_CMPLT_NORMAL) {
2859 struct blogic_tgt_flags *tgt_flags =
2860 &adapter->tgt_flags[ccb->tgt_id];
2861 struct scsi_inquiry *inquiry =
2862 (struct scsi_inquiry *) scsi_sglist(command);
2863 tgt_flags->tgt_exists = true;
2864 tgt_flags->tagq_ok = inquiry->CmdQue;
2865 tgt_flags->wide_ok = inquiry->WBus16;
2866 }
2867 /*
2868 Place CCB back on the Host Adapter's free list.
2869 */
2870 blogic_dealloc_ccb(ccb, 1);
2871 /*
2872 Call the SCSI Command Completion Routine.
2873 */
2874 command->scsi_done(command);
2875 }
2876 }
2877 adapter->processing_ccbs = false;
2878 }
2879
2880
2881 /*
2882 blogic_inthandler handles hardware interrupts from BusLogic Host
2883 Adapters.
2884 */
2885
2886 static irqreturn_t blogic_inthandler(int irq_ch, void *devid)
2887 {
2888 struct blogic_adapter *adapter = (struct blogic_adapter *) devid;
2889 unsigned long processor_flag;
2890 /*
2891 Acquire exclusive access to Host Adapter.
2892 */
2893 spin_lock_irqsave(adapter->scsi_host->host_lock, processor_flag);
2894 /*
2895 Handle Interrupts appropriately for each Host Adapter type.
2896 */
2897 if (blogic_multimaster_type(adapter)) {
2898 union blogic_int_reg intreg;
2899 /*
2900 Read the Host Adapter Interrupt Register.
2901 */
2902 intreg.all = blogic_rdint(adapter);
2903 if (intreg.ir.int_valid) {
2904 /*
2905 Acknowledge the interrupt and reset the Host Adapter
2906 Interrupt Register.
2907 */
2908 blogic_intreset(adapter);
2909 /*
2910 Process valid External SCSI Bus Reset and Incoming
2911 Mailbox Loaded Interrupts. Command Complete
2912 Interrupts are noted, and Outgoing Mailbox Available
2913 Interrupts are ignored, as they are never enabled.
2914 */
2915 if (intreg.ir.ext_busreset)
2916 adapter->adapter_extreset = true;
2917 else if (intreg.ir.mailin_loaded)
2918 blogic_scan_inbox(adapter);
2919 else if (intreg.ir.cmd_complete)
2920 adapter->adapter_cmd_complete = true;
2921 }
2922 } else {
2923 /*
2924 Check if there is a pending interrupt for this Host Adapter.
2925 */
2926 if (FlashPoint_InterruptPending(adapter->cardhandle))
2927 switch (FlashPoint_HandleInterrupt(adapter->cardhandle)) {
2928 case FPOINT_NORMAL_INT:
2929 break;
2930 case FPOINT_EXT_RESET:
2931 adapter->adapter_extreset = true;
2932 break;
2933 case FPOINT_INTERN_ERR:
2934 blogic_warn("Internal FlashPoint Error detected - Resetting Host Adapter\n", adapter);
2935 adapter->adapter_intern_err = true;
2936 break;
2937 }
2938 }
2939 /*
2940 Process any completed CCBs.
2941 */
2942 if (adapter->firstccb != NULL)
2943 blogic_process_ccbs(adapter);
2944 /*
2945 Reset the Host Adapter if requested.
2946 */
2947 if (adapter->adapter_extreset) {
2948 blogic_warn("Resetting %s due to External SCSI Bus Reset\n", adapter, adapter->full_model);
2949 blogic_inc_count(&adapter->ext_resets);
2950 blogic_resetadapter(adapter, false);
2951 adapter->adapter_extreset = false;
2952 } else if (adapter->adapter_intern_err) {
2953 blogic_warn("Resetting %s due to Host Adapter Internal Error\n", adapter, adapter->full_model);
2954 blogic_inc_count(&adapter->adapter_intern_errors);
2955 blogic_resetadapter(adapter, true);
2956 adapter->adapter_intern_err = false;
2957 }
2958 /*
2959 Release exclusive access to Host Adapter.
2960 */
2961 spin_unlock_irqrestore(adapter->scsi_host->host_lock, processor_flag);
2962 return IRQ_HANDLED;
2963 }
2964
2965
2966 /*
2967 blogic_write_outbox places CCB and Action Code into an Outgoing
2968 Mailbox for execution by Host Adapter. The Host Adapter's Lock should
2969 already have been acquired by the caller.
2970 */
2971
2972 static bool blogic_write_outbox(struct blogic_adapter *adapter,
2973 enum blogic_action action, struct blogic_ccb *ccb)
2974 {
2975 struct blogic_outbox *next_outbox;
2976
2977 next_outbox = adapter->next_outbox;
2978 if (next_outbox->action == BLOGIC_OUTBOX_FREE) {
2979 ccb->status = BLOGIC_CCB_ACTIVE;
2980 /*
2981 The CCB field must be written before the Action Code field
2982 since the Host Adapter is operating asynchronously and the
2983 locking code does not protect against simultaneous access
2984 by the Host Adapter.
2985 */
2986 next_outbox->ccb = ccb->dma_handle;
2987 next_outbox->action = action;
2988 blogic_execmbox(adapter);
2989 if (++next_outbox > adapter->last_outbox)
2990 next_outbox = adapter->first_outbox;
2991 adapter->next_outbox = next_outbox;
2992 if (action == BLOGIC_MBOX_START) {
2993 adapter->active_cmds[ccb->tgt_id]++;
2994 if (ccb->opcode != BLOGIC_BDR)
2995 adapter->tgt_stats[ccb->tgt_id].cmds_tried++;
2996 }
2997 return true;
2998 }
2999 return false;
3000 }
3001
3002 /* Error Handling (EH) support */
3003
3004 static int blogic_hostreset(struct scsi_cmnd *SCpnt)
3005 {
3006 struct blogic_adapter *adapter =
3007 (struct blogic_adapter *) SCpnt->device->host->hostdata;
3008
3009 unsigned int id = SCpnt->device->id;
3010 struct blogic_tgt_stats *stats = &adapter->tgt_stats[id];
3011 int rc;
3012
3013 spin_lock_irq(SCpnt->device->host->host_lock);
3014
3015 blogic_inc_count(&stats->adapter_reset_req);
3016
3017 rc = blogic_resetadapter(adapter, false);
3018 spin_unlock_irq(SCpnt->device->host->host_lock);
3019 return rc;
3020 }
3021
3022 /*
3023 blogic_qcmd creates a CCB for Command and places it into an
3024 Outgoing Mailbox for execution by the associated Host Adapter.
3025 */
3026
3027 static int blogic_qcmd_lck(struct scsi_cmnd *command,
3028 void (*comp_cb) (struct scsi_cmnd *))
3029 {
3030 struct blogic_adapter *adapter =
3031 (struct blogic_adapter *) command->device->host->hostdata;
3032 struct blogic_tgt_flags *tgt_flags =
3033 &adapter->tgt_flags[command->device->id];
3034 struct blogic_tgt_stats *tgt_stats = adapter->tgt_stats;
3035 unsigned char *cdb = command->cmnd;
3036 int cdblen = command->cmd_len;
3037 int tgt_id = command->device->id;
3038 int lun = command->device->lun;
3039 int buflen = scsi_bufflen(command);
3040 int count;
3041 struct blogic_ccb *ccb;
3042 dma_addr_t sense_buf;
3043
3044 /*
3045 SCSI REQUEST_SENSE commands will be executed automatically by the
3046 Host Adapter for any errors, so they should not be executed
3047 explicitly unless the Sense Data is zero indicating that no error
3048 occurred.
3049 */
3050 if (cdb[0] == REQUEST_SENSE && command->sense_buffer[0] != 0) {
3051 command->result = DID_OK << 16;
3052 comp_cb(command);
3053 return 0;
3054 }
3055 /*
3056 Allocate a CCB from the Host Adapter's free list. In the unlikely
3057 event that there are none available and memory allocation fails,
3058 wait 1 second and try again. If that fails, the Host Adapter is
3059 probably hung so signal an error as a Host Adapter Hard Reset
3060 should be initiated soon.
3061 */
3062 ccb = blogic_alloc_ccb(adapter);
3063 if (ccb == NULL) {
3064 spin_unlock_irq(adapter->scsi_host->host_lock);
3065 blogic_delay(1);
3066 spin_lock_irq(adapter->scsi_host->host_lock);
3067 ccb = blogic_alloc_ccb(adapter);
3068 if (ccb == NULL) {
3069 command->result = DID_ERROR << 16;
3070 comp_cb(command);
3071 return 0;
3072 }
3073 }
3074
3075 /*
3076 Initialize the fields in the BusLogic Command Control Block (CCB).
3077 */
3078 count = scsi_dma_map(command);
3079 BUG_ON(count < 0);
3080 if (count) {
3081 struct scatterlist *sg;
3082 int i;
3083
3084 ccb->opcode = BLOGIC_INITIATOR_CCB_SG;
3085 ccb->datalen = count * sizeof(struct blogic_sg_seg);
3086 if (blogic_multimaster_type(adapter))
3087 ccb->data = (void *)((unsigned int) ccb->dma_handle +
3088 ((unsigned long) &ccb->sglist -
3089 (unsigned long) ccb));
3090 else
3091 ccb->data = ccb->sglist;
3092
3093 scsi_for_each_sg(command, sg, count, i) {
3094 ccb->sglist[i].segbytes = sg_dma_len(sg);
3095 ccb->sglist[i].segdata = sg_dma_address(sg);
3096 }
3097 } else if (!count) {
3098 ccb->opcode = BLOGIC_INITIATOR_CCB;
3099 ccb->datalen = buflen;
3100 ccb->data = 0;
3101 }
3102
3103 switch (cdb[0]) {
3104 case READ_6:
3105 case READ_10:
3106 ccb->datadir = BLOGIC_DATAIN_CHECKED;
3107 tgt_stats[tgt_id].read_cmds++;
3108 blogic_addcount(&tgt_stats[tgt_id].bytesread, buflen);
3109 blogic_incszbucket(tgt_stats[tgt_id].read_sz_buckets, buflen);
3110 break;
3111 case WRITE_6:
3112 case WRITE_10:
3113 ccb->datadir = BLOGIC_DATAOUT_CHECKED;
3114 tgt_stats[tgt_id].write_cmds++;
3115 blogic_addcount(&tgt_stats[tgt_id].byteswritten, buflen);
3116 blogic_incszbucket(tgt_stats[tgt_id].write_sz_buckets, buflen);
3117 break;
3118 default:
3119 ccb->datadir = BLOGIC_UNCHECKED_TX;
3120 break;
3121 }
3122 ccb->cdblen = cdblen;
3123 ccb->adapter_status = 0;
3124 ccb->tgt_status = 0;
3125 ccb->tgt_id = tgt_id;
3126 ccb->lun = lun;
3127 ccb->tag_enable = false;
3128 ccb->legacytag_enable = false;
3129 /*
3130 BusLogic recommends that after a Reset the first couple of
3131 commands that are sent to a Target Device be sent in a non
3132 Tagged Queue fashion so that the Host Adapter and Target Device
3133 can establish Synchronous and Wide Transfer before Queue Tag
3134 messages can interfere with the Synchronous and Wide Negotiation
3135 messages. By waiting to enable Tagged Queuing until after the
3136 first BLOGIC_MAX_TAG_DEPTH commands have been queued, it is
3137 assured that after a Reset any pending commands are requeued
3138 before Tagged Queuing is enabled and that the Tagged Queuing
3139 message will not occur while the partition table is being printed.
3140 In addition, some devices do not properly handle the transition
3141 from non-tagged to tagged commands, so it is necessary to wait
3142 until there are no pending commands for a target device
3143 before queuing tagged commands.
3144 */
3145 if (adapter->cmds_since_rst[tgt_id]++ >= BLOGIC_MAX_TAG_DEPTH &&
3146 !tgt_flags->tagq_active &&
3147 adapter->active_cmds[tgt_id] == 0
3148 && tgt_flags->tagq_ok &&
3149 (adapter->tagq_ok & (1 << tgt_id))) {
3150 tgt_flags->tagq_active = true;
3151 blogic_notice("Tagged Queuing now active for Target %d\n",
3152 adapter, tgt_id);
3153 }
3154 if (tgt_flags->tagq_active) {
3155 enum blogic_queuetag queuetag = BLOGIC_SIMPLETAG;
3156 /*
3157 When using Tagged Queuing with Simple Queue Tags, it
3158 appears that disk drive controllers do not guarantee that
3159 a queued command will not remain in a disconnected state
3160 indefinitely if commands that read or write nearer the
3161 head position continue to arrive without interruption.
3162 Therefore, for each Target Device this driver keeps track
3163 of the last time either the queue was empty or an Ordered
3164 Queue Tag was issued. If more than 4 seconds (one fifth
3165 of the 20 second disk timeout) have elapsed since this
3166 last sequence point, this command will be issued with an
3167 Ordered Queue Tag rather than a Simple Queue Tag, which
3168 forces the Target Device to complete all previously
3169 queued commands before this command may be executed.
3170 */
3171 if (adapter->active_cmds[tgt_id] == 0)
3172 adapter->last_seqpoint[tgt_id] = jiffies;
3173 else if (time_after(jiffies,
3174 adapter->last_seqpoint[tgt_id] + 4 * HZ)) {
3175 adapter->last_seqpoint[tgt_id] = jiffies;
3176 queuetag = BLOGIC_ORDEREDTAG;
3177 }
3178 if (adapter->ext_lun) {
3179 ccb->tag_enable = true;
3180 ccb->queuetag = queuetag;
3181 } else {
3182 ccb->legacytag_enable = true;
3183 ccb->legacy_tag = queuetag;
3184 }
3185 }
3186 memcpy(ccb->cdb, cdb, cdblen);
3187 ccb->sense_datalen = SCSI_SENSE_BUFFERSIZE;
3188 ccb->command = command;
3189 sense_buf = dma_map_single(&adapter->pci_device->dev,
3190 command->sense_buffer, ccb->sense_datalen,
3191 DMA_FROM_DEVICE);
3192 if (dma_mapping_error(&adapter->pci_device->dev, sense_buf)) {
3193 blogic_err("DMA mapping for sense data buffer failed\n",
3194 adapter);
3195 blogic_dealloc_ccb(ccb, 0);
3196 return SCSI_MLQUEUE_HOST_BUSY;
3197 }
3198 ccb->sensedata = sense_buf;
3199 command->scsi_done = comp_cb;
3200 if (blogic_multimaster_type(adapter)) {
3201 /*
3202 Place the CCB in an Outgoing Mailbox. The higher levels
3203 of the SCSI Subsystem should not attempt to queue more
3204 commands than can be placed in Outgoing Mailboxes, so
3205 there should always be one free. In the unlikely event
3206 that there are none available, wait 1 second and try
3207 again. If that fails, the Host Adapter is probably hung
3208 so signal an error as a Host Adapter Hard Reset should
3209 be initiated soon.
3210 */
3211 if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START, ccb)) {
3212 spin_unlock_irq(adapter->scsi_host->host_lock);
3213 blogic_warn("Unable to write Outgoing Mailbox - " "Pausing for 1 second\n", adapter);
3214 blogic_delay(1);
3215 spin_lock_irq(adapter->scsi_host->host_lock);
3216 if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START,
3217 ccb)) {
3218 blogic_warn("Still unable to write Outgoing Mailbox - " "Host Adapter Dead?\n", adapter);
3219 blogic_dealloc_ccb(ccb, 1);
3220 command->result = DID_ERROR << 16;
3221 command->scsi_done(command);
3222 }
3223 }
3224 } else {
3225 /*
3226 Call the FlashPoint SCCB Manager to start execution of
3227 the CCB.
3228 */
3229 ccb->status = BLOGIC_CCB_ACTIVE;
3230 adapter->active_cmds[tgt_id]++;
3231 tgt_stats[tgt_id].cmds_tried++;
3232 FlashPoint_StartCCB(adapter->cardhandle, ccb);
3233 /*
3234 The Command may have already completed and
3235 blogic_qcompleted_ccb been called, or it may still be
3236 pending.
3237 */
3238 if (ccb->status == BLOGIC_CCB_COMPLETE)
3239 blogic_process_ccbs(adapter);
3240 }
3241 return 0;
3242 }
3243
3244 static DEF_SCSI_QCMD(blogic_qcmd)
3245
3246 #if 0
3247 /*
3248 blogic_abort aborts Command if possible.
3249 */
3250
3251 static int blogic_abort(struct scsi_cmnd *command)
3252 {
3253 struct blogic_adapter *adapter =
3254 (struct blogic_adapter *) command->device->host->hostdata;
3255
3256 int tgt_id = command->device->id;
3257 struct blogic_ccb *ccb;
3258 blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_request);
3259
3260 /*
3261 Attempt to find an Active CCB for this Command. If no Active
3262 CCB for this Command is found, then no Abort is necessary.
3263 */
3264 for (ccb = adapter->all_ccbs; ccb != NULL; ccb = ccb->next_all)
3265 if (ccb->command == command)
3266 break;
3267 if (ccb == NULL) {
3268 blogic_warn("Unable to Abort Command to Target %d - No CCB Found\n", adapter, tgt_id);
3269 return SUCCESS;
3270 } else if (ccb->status == BLOGIC_CCB_COMPLETE) {
3271 blogic_warn("Unable to Abort Command to Target %d - CCB Completed\n", adapter, tgt_id);
3272 return SUCCESS;
3273 } else if (ccb->status == BLOGIC_CCB_RESET) {
3274 blogic_warn("Unable to Abort Command to Target %d - CCB Reset\n", adapter, tgt_id);
3275 return SUCCESS;
3276 }
3277 if (blogic_multimaster_type(adapter)) {
3278 /*
3279 Attempt to Abort this CCB. MultiMaster Firmware versions
3280 prior to 5.xx do not generate Abort Tag messages, but only
3281 generate the non-tagged Abort message. Since non-tagged
3282 commands are not sent by the Host Adapter until the queue
3283 of outstanding tagged commands has completed, and the
3284 Abort message is treated as a non-tagged command, it is
3285 effectively impossible to abort commands when Tagged
3286 Queuing is active. Firmware version 5.xx does generate
3287 Abort Tag messages, so it is possible to abort commands
3288 when Tagged Queuing is active.
3289 */
3290 if (adapter->tgt_flags[tgt_id].tagq_active &&
3291 adapter->fw_ver[0] < '5') {
3292 blogic_warn("Unable to Abort CCB #%ld to Target %d - Abort Tag Not Supported\n", adapter, ccb->serial, tgt_id);
3293 return FAILURE;
3294 } else if (blogic_write_outbox(adapter, BLOGIC_MBOX_ABORT,
3295 ccb)) {
3296 blogic_warn("Aborting CCB #%ld to Target %d\n",
3297 adapter, ccb->serial, tgt_id);
3298 blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried);
3299 return SUCCESS;
3300 } else {
3301 blogic_warn("Unable to Abort CCB #%ld to Target %d - No Outgoing Mailboxes\n", adapter, ccb->serial, tgt_id);
3302 return FAILURE;
3303 }
3304 } else {
3305 /*
3306 Call the FlashPoint SCCB Manager to abort execution of
3307 the CCB.
3308 */
3309 blogic_warn("Aborting CCB #%ld to Target %d\n", adapter,
3310 ccb->serial, tgt_id);
3311 blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried);
3312 FlashPoint_AbortCCB(adapter->cardhandle, ccb);
3313 /*
3314 The Abort may have already been completed and
3315 blogic_qcompleted_ccb been called, or it
3316 may still be pending.
3317 */
3318 if (ccb->status == BLOGIC_CCB_COMPLETE)
3319 blogic_process_ccbs(adapter);
3320 return SUCCESS;
3321 }
3322 return SUCCESS;
3323 }
3324
3325 #endif
3326 /*
3327 blogic_resetadapter resets Host Adapter if possible, marking all
3328 currently executing SCSI Commands as having been Reset.
3329 */
3330
3331 static int blogic_resetadapter(struct blogic_adapter *adapter, bool hard_reset)
3332 {
3333 struct blogic_ccb *ccb;
3334 int tgt_id;
3335
3336 /*
3337 * Attempt to Reset and Reinitialize the Host Adapter.
3338 */
3339
3340 if (!(blogic_hwreset(adapter, hard_reset) &&
3341 blogic_initadapter(adapter))) {
3342 blogic_err("Resetting %s Failed\n", adapter,
3343 adapter->full_model);
3344 return FAILURE;
3345 }
3346
3347 /*
3348 * Deallocate all currently executing CCBs.
3349 */
3350
3351 for (ccb = adapter->all_ccbs; ccb != NULL; ccb = ccb->next_all)
3352 if (ccb->status == BLOGIC_CCB_ACTIVE)
3353 blogic_dealloc_ccb(ccb, 1);
3354 /*
3355 * Wait a few seconds between the Host Adapter Hard Reset which
3356 * initiates a SCSI Bus Reset and issuing any SCSI Commands. Some
3357 * SCSI devices get confused if they receive SCSI Commands too soon
3358 * after a SCSI Bus Reset.
3359 */
3360
3361 if (hard_reset) {
3362 spin_unlock_irq(adapter->scsi_host->host_lock);
3363 blogic_delay(adapter->bus_settle_time);
3364 spin_lock_irq(adapter->scsi_host->host_lock);
3365 }
3366
3367 for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) {
3368 adapter->last_resettried[tgt_id] = jiffies;
3369 adapter->last_resetdone[tgt_id] = jiffies;
3370 }
3371 return SUCCESS;
3372 }
3373
3374 /*
3375 blogic_diskparam returns the Heads/Sectors/Cylinders BIOS Disk
3376 Parameters for Disk. The default disk geometry is 64 heads, 32 sectors, and
3377 the appropriate number of cylinders so as not to exceed drive capacity. In
3378 order for disks equal to or larger than 1 GB to be addressable by the BIOS
3379 without exceeding the BIOS limitation of 1024 cylinders, Extended Translation
3380 may be enabled in AutoSCSI on FlashPoint Host Adapters and on "W" and "C"
3381 series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A"
3382 series MultiMaster Host Adapters. With Extended Translation enabled, drives
3383 between 1 GB inclusive and 2 GB exclusive are given a disk geometry of 128
3384 heads and 32 sectors, and drives above 2 GB inclusive are given a disk
3385 geometry of 255 heads and 63 sectors. However, if the BIOS detects that the
3386 Extended Translation setting does not match the geometry in the partition
3387 table, then the translation inferred from the partition table will be used by
3388 the BIOS, and a warning may be displayed.
3389 */
3390
3391 static int blogic_diskparam(struct scsi_device *sdev, struct block_device *dev,
3392 sector_t capacity, int *params)
3393 {
3394 struct blogic_adapter *adapter =
3395 (struct blogic_adapter *) sdev->host->hostdata;
3396 struct bios_diskparam *diskparam = (struct bios_diskparam *) params;
3397 unsigned char *buf;
3398
3399 if (adapter->ext_trans_enable && capacity >= 2 * 1024 * 1024 /* 1 GB in 512 byte sectors */) {
3400 if (capacity >= 4 * 1024 * 1024 /* 2 GB in 512 byte sectors */) {
3401 diskparam->heads = 255;
3402 diskparam->sectors = 63;
3403 } else {
3404 diskparam->heads = 128;
3405 diskparam->sectors = 32;
3406 }
3407 } else {
3408 diskparam->heads = 64;
3409 diskparam->sectors = 32;
3410 }
3411 diskparam->cylinders = (unsigned long) capacity / (diskparam->heads * diskparam->sectors);
3412 buf = scsi_bios_ptable(dev);
3413 if (buf == NULL)
3414 return 0;
3415 /*
3416 If the boot sector partition table flag is valid, search for
3417 a partition table entry whose end_head matches one of the
3418 standard BusLogic geometry translations (64/32, 128/32, or 255/63).
3419 */
3420 if (*(unsigned short *) (buf + 64) == 0xAA55) {
3421 struct partition *part1_entry = (struct partition *) buf;
3422 struct partition *part_entry = part1_entry;
3423 int saved_cyl = diskparam->cylinders, part_no;
3424 unsigned char part_end_head = 0, part_end_sector = 0;
3425
3426 for (part_no = 0; part_no < 4; part_no++) {
3427 part_end_head = part_entry->end_head;
3428 part_end_sector = part_entry->end_sector & 0x3F;
3429 if (part_end_head == 64 - 1) {
3430 diskparam->heads = 64;
3431 diskparam->sectors = 32;
3432 break;
3433 } else if (part_end_head == 128 - 1) {
3434 diskparam->heads = 128;
3435 diskparam->sectors = 32;
3436 break;
3437 } else if (part_end_head == 255 - 1) {
3438 diskparam->heads = 255;
3439 diskparam->sectors = 63;
3440 break;
3441 }
3442 part_entry++;
3443 }
3444 if (part_no == 4) {
3445 part_end_head = part1_entry->end_head;
3446 part_end_sector = part1_entry->end_sector & 0x3F;
3447 }
3448 diskparam->cylinders = (unsigned long) capacity / (diskparam->heads * diskparam->sectors);
3449 if (part_no < 4 && part_end_sector == diskparam->sectors) {
3450 if (diskparam->cylinders != saved_cyl)
3451 blogic_warn("Adopting Geometry %d/%d from Partition Table\n", adapter, diskparam->heads, diskparam->sectors);
3452 } else if (part_end_head > 0 || part_end_sector > 0) {
3453 blogic_warn("Warning: Partition Table appears to " "have Geometry %d/%d which is\n", adapter, part_end_head + 1, part_end_sector);
3454 blogic_warn("not compatible with current BusLogic " "Host Adapter Geometry %d/%d\n", adapter, diskparam->heads, diskparam->sectors);
3455 }
3456 }
3457 kfree(buf);
3458 return 0;
3459 }
3460
3461
3462 /*
3463 BugLogic_ProcDirectoryInfo implements /proc/scsi/BusLogic/<N>.
3464 */
3465
3466 static int blogic_write_info(struct Scsi_Host *shost, char *procbuf,
3467 int bytes_avail)
3468 {
3469 struct blogic_adapter *adapter =
3470 (struct blogic_adapter *) shost->hostdata;
3471 struct blogic_tgt_stats *tgt_stats;
3472
3473 tgt_stats = adapter->tgt_stats;
3474 adapter->ext_resets = 0;
3475 adapter->adapter_intern_errors = 0;
3476 memset(tgt_stats, 0, BLOGIC_MAXDEV * sizeof(struct blogic_tgt_stats));
3477 return 0;
3478 }
3479
3480 static int blogic_show_info(struct seq_file *m, struct Scsi_Host *shost)
3481 {
3482 struct blogic_adapter *adapter = (struct blogic_adapter *) shost->hostdata;
3483 struct blogic_tgt_stats *tgt_stats;
3484 int tgt;
3485
3486 tgt_stats = adapter->tgt_stats;
3487 seq_write(m, adapter->msgbuf, adapter->msgbuflen);
3488 seq_printf(m, "\n\
3489 Current Driver Queue Depth: %d\n\
3490 Currently Allocated CCBs: %d\n", adapter->drvr_qdepth, adapter->alloc_ccbs);
3491 seq_puts(m, "\n\n\
3492 DATA TRANSFER STATISTICS\n\
3493 \n\
3494 Target Tagged Queuing Queue Depth Active Attempted Completed\n\
3495 ====== ============== =========== ====== ========= =========\n");
3496 for (tgt = 0; tgt < adapter->maxdev; tgt++) {
3497 struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt];
3498 if (!tgt_flags->tgt_exists)
3499 continue;
3500 seq_printf(m, " %2d %s", tgt, (tgt_flags->tagq_ok ? (tgt_flags->tagq_active ? " Active" : (adapter->tagq_ok & (1 << tgt)
3501 ? " Permitted" : " Disabled"))
3502 : "Not Supported"));
3503 seq_printf(m,
3504 " %3d %3u %9u %9u\n", adapter->qdepth[tgt], adapter->active_cmds[tgt], tgt_stats[tgt].cmds_tried, tgt_stats[tgt].cmds_complete);
3505 }
3506 seq_puts(m, "\n\
3507 Target Read Commands Write Commands Total Bytes Read Total Bytes Written\n\
3508 ====== ============= ============== =================== ===================\n");
3509 for (tgt = 0; tgt < adapter->maxdev; tgt++) {
3510 struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt];
3511 if (!tgt_flags->tgt_exists)
3512 continue;
3513 seq_printf(m, " %2d %9u %9u", tgt, tgt_stats[tgt].read_cmds, tgt_stats[tgt].write_cmds);
3514 if (tgt_stats[tgt].bytesread.billions > 0)
3515 seq_printf(m, " %9u%09u", tgt_stats[tgt].bytesread.billions, tgt_stats[tgt].bytesread.units);
3516 else
3517 seq_printf(m, " %9u", tgt_stats[tgt].bytesread.units);
3518 if (tgt_stats[tgt].byteswritten.billions > 0)
3519 seq_printf(m, " %9u%09u\n", tgt_stats[tgt].byteswritten.billions, tgt_stats[tgt].byteswritten.units);
3520 else
3521 seq_printf(m, " %9u\n", tgt_stats[tgt].byteswritten.units);
3522 }
3523 seq_puts(m, "\n\
3524 Target Command 0-1KB 1-2KB 2-4KB 4-8KB 8-16KB\n\
3525 ====== ======= ========= ========= ========= ========= =========\n");
3526 for (tgt = 0; tgt < adapter->maxdev; tgt++) {
3527 struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt];
3528 if (!tgt_flags->tgt_exists)
3529 continue;
3530 seq_printf(m,
3531 " %2d Read %9u %9u %9u %9u %9u\n", tgt,
3532 tgt_stats[tgt].read_sz_buckets[0],
3533 tgt_stats[tgt].read_sz_buckets[1], tgt_stats[tgt].read_sz_buckets[2], tgt_stats[tgt].read_sz_buckets[3], tgt_stats[tgt].read_sz_buckets[4]);
3534 seq_printf(m,
3535 " %2d Write %9u %9u %9u %9u %9u\n", tgt,
3536 tgt_stats[tgt].write_sz_buckets[0],
3537 tgt_stats[tgt].write_sz_buckets[1], tgt_stats[tgt].write_sz_buckets[2], tgt_stats[tgt].write_sz_buckets[3], tgt_stats[tgt].write_sz_buckets[4]);
3538 }
3539 seq_puts(m, "\n\
3540 Target Command 16-32KB 32-64KB 64-128KB 128-256KB 256KB+\n\
3541 ====== ======= ========= ========= ========= ========= =========\n");
3542 for (tgt = 0; tgt < adapter->maxdev; tgt++) {
3543 struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt];
3544 if (!tgt_flags->tgt_exists)
3545 continue;
3546 seq_printf(m,
3547 " %2d Read %9u %9u %9u %9u %9u\n", tgt,
3548 tgt_stats[tgt].read_sz_buckets[5],
3549 tgt_stats[tgt].read_sz_buckets[6], tgt_stats[tgt].read_sz_buckets[7], tgt_stats[tgt].read_sz_buckets[8], tgt_stats[tgt].read_sz_buckets[9]);
3550 seq_printf(m,
3551 " %2d Write %9u %9u %9u %9u %9u\n", tgt,
3552 tgt_stats[tgt].write_sz_buckets[5],
3553 tgt_stats[tgt].write_sz_buckets[6], tgt_stats[tgt].write_sz_buckets[7], tgt_stats[tgt].write_sz_buckets[8], tgt_stats[tgt].write_sz_buckets[9]);
3554 }
3555 seq_puts(m, "\n\n\
3556 ERROR RECOVERY STATISTICS\n\
3557 \n\
3558 Command Aborts Bus Device Resets Host Adapter Resets\n\
3559 Target Requested Completed Requested Completed Requested Completed\n\
3560 ID \\\\\\\\ Attempted //// \\\\\\\\ Attempted //// \\\\\\\\ Attempted ////\n\
3561 ====== ===== ===== ===== ===== ===== ===== ===== ===== =====\n");
3562 for (tgt = 0; tgt < adapter->maxdev; tgt++) {
3563 struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt];
3564 if (!tgt_flags->tgt_exists)
3565 continue;
3566 seq_printf(m, " %2d %5d %5d %5d %5d %5d %5d %5d %5d %5d\n",
3567 tgt, tgt_stats[tgt].aborts_request,
3568 tgt_stats[tgt].aborts_tried,
3569 tgt_stats[tgt].aborts_done,
3570 tgt_stats[tgt].bdr_request,
3571 tgt_stats[tgt].bdr_tried,
3572 tgt_stats[tgt].bdr_done,
3573 tgt_stats[tgt].adapter_reset_req,
3574 tgt_stats[tgt].adapter_reset_attempt,
3575 tgt_stats[tgt].adapter_reset_done);
3576 }
3577 seq_printf(m, "\nExternal Host Adapter Resets: %d\n", adapter->ext_resets);
3578 seq_printf(m, "Host Adapter Internal Errors: %d\n", adapter->adapter_intern_errors);
3579 return 0;
3580 }
3581
3582
3583 /*
3584 blogic_msg prints Driver Messages.
3585 */
3586
3587 static void blogic_msg(enum blogic_msglevel msglevel, char *fmt,
3588 struct blogic_adapter *adapter, ...)
3589 {
3590 static char buf[BLOGIC_LINEBUF_SIZE];
3591 static bool begin = true;
3592 va_list args;
3593 int len = 0;
3594
3595 va_start(args, adapter);
3596 len = vsprintf(buf, fmt, args);
3597 va_end(args);
3598 if (msglevel == BLOGIC_ANNOUNCE_LEVEL) {
3599 static int msglines = 0;
3600 strcpy(&adapter->msgbuf[adapter->msgbuflen], buf);
3601 adapter->msgbuflen += len;
3602 if (++msglines <= 2)
3603 printk("%sscsi: %s", blogic_msglevelmap[msglevel], buf);
3604 } else if (msglevel == BLOGIC_INFO_LEVEL) {
3605 strcpy(&adapter->msgbuf[adapter->msgbuflen], buf);
3606 adapter->msgbuflen += len;
3607 if (begin) {
3608 if (buf[0] != '\n' || len > 1)
3609 printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf);
3610 } else
3611 printk("%s", buf);
3612 } else {
3613 if (begin) {
3614 if (adapter != NULL && adapter->adapter_initd)
3615 printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf);
3616 else
3617 printk("%s%s", blogic_msglevelmap[msglevel], buf);
3618 } else
3619 printk("%s", buf);
3620 }
3621 begin = (buf[len - 1] == '\n');
3622 }
3623
3624
3625 /*
3626 blogic_parse parses an individual option keyword. It returns true
3627 and updates the pointer if the keyword is recognized and false otherwise.
3628 */
3629
3630 static bool __init blogic_parse(char **str, char *keyword)
3631 {
3632 char *pointer = *str;
3633 while (*keyword != '\0') {
3634 char strch = *pointer++;
3635 char keywordch = *keyword++;
3636 if (strch >= 'A' && strch <= 'Z')
3637 strch += 'a' - 'Z';
3638 if (keywordch >= 'A' && keywordch <= 'Z')
3639 keywordch += 'a' - 'Z';
3640 if (strch != keywordch)
3641 return false;
3642 }
3643 *str = pointer;
3644 return true;
3645 }
3646
3647
3648 /*
3649 blogic_parseopts handles processing of BusLogic Driver Options
3650 specifications.
3651
3652 BusLogic Driver Options may be specified either via the Linux Kernel Command
3653 Line or via the Loadable Kernel Module Installation Facility. Driver Options
3654 for multiple host adapters may be specified either by separating the option
3655 strings by a semicolon, or by specifying multiple "BusLogic=" strings on the
3656 command line. Individual option specifications for a single host adapter are
3657 separated by commas. The Probing and Debugging Options apply to all host
3658 adapters whereas the remaining options apply individually only to the
3659 selected host adapter.
3660
3661 The BusLogic Driver Probing Options are described in
3662 <file:Documentation/scsi/BusLogic.txt>.
3663 */
3664
3665 static int __init blogic_parseopts(char *options)
3666 {
3667 while (true) {
3668 struct blogic_drvr_options *drvr_opts =
3669 &blogic_drvr_options[blogic_drvr_options_count++];
3670 int tgt_id;
3671
3672 memset(drvr_opts, 0, sizeof(struct blogic_drvr_options));
3673 while (*options != '\0' && *options != ';') {
3674 /* Probing Options. */
3675 if (blogic_parse(&options, "IO:")) {
3676 unsigned long io_addr = simple_strtoul(options,
3677 &options, 0);
3678 blogic_probe_options.limited_isa = true;
3679 switch (io_addr) {
3680 case 0x330:
3681 blogic_probe_options.probe330 = true;
3682 break;
3683 case 0x334:
3684 blogic_probe_options.probe334 = true;
3685 break;
3686 case 0x230:
3687 blogic_probe_options.probe230 = true;
3688 break;
3689 case 0x234:
3690 blogic_probe_options.probe234 = true;
3691 break;
3692 case 0x130:
3693 blogic_probe_options.probe130 = true;
3694 break;
3695 case 0x134:
3696 blogic_probe_options.probe134 = true;
3697 break;
3698 default:
3699 blogic_err("BusLogic: Invalid Driver Options " "(invalid I/O Address 0x%X)\n", NULL, io_addr);
3700 return 0;
3701 }
3702 } else if (blogic_parse(&options, "NoProbeISA"))
3703 blogic_probe_options.noprobe_isa = true;
3704 else if (blogic_parse(&options, "NoProbePCI"))
3705 blogic_probe_options.noprobe_pci = true;
3706 else if (blogic_parse(&options, "NoProbe"))
3707 blogic_probe_options.noprobe = true;
3708 else if (blogic_parse(&options, "NoSortPCI"))
3709 blogic_probe_options.nosort_pci = true;
3710 else if (blogic_parse(&options, "MultiMasterFirst"))
3711 blogic_probe_options.multimaster_first = true;
3712 else if (blogic_parse(&options, "FlashPointFirst"))
3713 blogic_probe_options.flashpoint_first = true;
3714 /* Tagged Queuing Options. */
3715 else if (blogic_parse(&options, "QueueDepth:[") ||
3716 blogic_parse(&options, "QD:[")) {
3717 for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) {
3718 unsigned short qdepth = simple_strtoul(options, &options, 0);
3719 if (qdepth > BLOGIC_MAX_TAG_DEPTH) {
3720 blogic_err("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, qdepth);
3721 return 0;
3722 }
3723 drvr_opts->qdepth[tgt_id] = qdepth;
3724 if (*options == ',')
3725 options++;
3726 else if (*options == ']')
3727 break;
3728 else {
3729 blogic_err("BusLogic: Invalid Driver Options " "(',' or ']' expected at '%s')\n", NULL, options);
3730 return 0;
3731 }
3732 }
3733 if (*options != ']') {
3734 blogic_err("BusLogic: Invalid Driver Options " "(']' expected at '%s')\n", NULL, options);
3735 return 0;
3736 } else
3737 options++;
3738 } else if (blogic_parse(&options, "QueueDepth:") || blogic_parse(&options, "QD:")) {
3739 unsigned short qdepth = simple_strtoul(options, &options, 0);
3740 if (qdepth == 0 ||
3741 qdepth > BLOGIC_MAX_TAG_DEPTH) {
3742 blogic_err("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, qdepth);
3743 return 0;
3744 }
3745 drvr_opts->common_qdepth = qdepth;
3746 for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++)
3747 drvr_opts->qdepth[tgt_id] = qdepth;
3748 } else if (blogic_parse(&options, "TaggedQueuing:") ||
3749 blogic_parse(&options, "TQ:")) {
3750 if (blogic_parse(&options, "Default")) {
3751 drvr_opts->tagq_ok = 0x0000;
3752 drvr_opts->tagq_ok_mask = 0x0000;
3753 } else if (blogic_parse(&options, "Enable")) {
3754 drvr_opts->tagq_ok = 0xFFFF;
3755 drvr_opts->tagq_ok_mask = 0xFFFF;
3756 } else if (blogic_parse(&options, "Disable")) {
3757 drvr_opts->tagq_ok = 0x0000;
3758 drvr_opts->tagq_ok_mask = 0xFFFF;
3759 } else {
3760 unsigned short tgt_bit;
3761 for (tgt_id = 0, tgt_bit = 1;
3762 tgt_id < BLOGIC_MAXDEV;
3763 tgt_id++, tgt_bit <<= 1)
3764 switch (*options++) {
3765 case 'Y':
3766 drvr_opts->tagq_ok |= tgt_bit;
3767 drvr_opts->tagq_ok_mask |= tgt_bit;
3768 break;
3769 case 'N':
3770 drvr_opts->tagq_ok &= ~tgt_bit;
3771 drvr_opts->tagq_ok_mask |= tgt_bit;
3772 break;
3773 case 'X':
3774 break;
3775 default:
3776 options--;
3777 tgt_id = BLOGIC_MAXDEV;
3778 break;
3779 }
3780 }
3781 }
3782 /* Miscellaneous Options. */
3783 else if (blogic_parse(&options, "BusSettleTime:") ||
3784 blogic_parse(&options, "BST:")) {
3785 unsigned short bus_settle_time =
3786 simple_strtoul(options, &options, 0);
3787 if (bus_settle_time > 5 * 60) {
3788 blogic_err("BusLogic: Invalid Driver Options " "(invalid Bus Settle Time %d)\n", NULL, bus_settle_time);
3789 return 0;
3790 }
3791 drvr_opts->bus_settle_time = bus_settle_time;
3792 } else if (blogic_parse(&options,
3793 "InhibitTargetInquiry"))
3794 drvr_opts->stop_tgt_inquiry = true;
3795 /* Debugging Options. */
3796 else if (blogic_parse(&options, "TraceProbe"))
3797 blogic_global_options.trace_probe = true;
3798 else if (blogic_parse(&options, "TraceHardwareReset"))
3799 blogic_global_options.trace_hw_reset = true;
3800 else if (blogic_parse(&options, "TraceConfiguration"))
3801 blogic_global_options.trace_config = true;
3802 else if (blogic_parse(&options, "TraceErrors"))
3803 blogic_global_options.trace_err = true;
3804 else if (blogic_parse(&options, "Debug")) {
3805 blogic_global_options.trace_probe = true;
3806 blogic_global_options.trace_hw_reset = true;
3807 blogic_global_options.trace_config = true;
3808 blogic_global_options.trace_err = true;
3809 }
3810 if (*options == ',')
3811 options++;
3812 else if (*options != ';' && *options != '\0') {
3813 blogic_err("BusLogic: Unexpected Driver Option '%s' " "ignored\n", NULL, options);
3814 *options = '\0';
3815 }
3816 }
3817 if (!(blogic_drvr_options_count == 0 ||
3818 blogic_probeinfo_count == 0 ||
3819 blogic_drvr_options_count == blogic_probeinfo_count)) {
3820 blogic_err("BusLogic: Invalid Driver Options " "(all or no I/O Addresses must be specified)\n", NULL);
3821 return 0;
3822 }
3823 /*
3824 Tagged Queuing is disabled when the Queue Depth is 1 since queuing
3825 multiple commands is not possible.
3826 */
3827 for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++)
3828 if (drvr_opts->qdepth[tgt_id] == 1) {
3829 unsigned short tgt_bit = 1 << tgt_id;
3830 drvr_opts->tagq_ok &= ~tgt_bit;
3831 drvr_opts->tagq_ok_mask |= tgt_bit;
3832 }
3833 if (*options == ';')
3834 options++;
3835 if (*options == '\0')
3836 return 0;
3837 }
3838 return 1;
3839 }
3840
3841 /*
3842 Get it all started
3843 */
3844
3845 static struct scsi_host_template blogic_template = {
3846 .module = THIS_MODULE,
3847 .proc_name = "BusLogic",
3848 .write_info = blogic_write_info,
3849 .show_info = blogic_show_info,
3850 .name = "BusLogic",
3851 .info = blogic_drvr_info,
3852 .queuecommand = blogic_qcmd,
3853 .slave_configure = blogic_slaveconfig,
3854 .bios_param = blogic_diskparam,
3855 .eh_host_reset_handler = blogic_hostreset,
3856 #if 0
3857 .eh_abort_handler = blogic_abort,
3858 #endif
3859 .unchecked_isa_dma = 1,
3860 .max_sectors = 128,
3861 };
3862
3863 /*
3864 blogic_setup handles processing of Kernel Command Line Arguments.
3865 */
3866
3867 static int __init blogic_setup(char *str)
3868 {
3869 int ints[3];
3870
3871 (void) get_options(str, ARRAY_SIZE(ints), ints);
3872
3873 if (ints[0] != 0) {
3874 blogic_err("BusLogic: Obsolete Command Line Entry " "Format Ignored\n", NULL);
3875 return 0;
3876 }
3877 if (str == NULL || *str == '\0')
3878 return 0;
3879 return blogic_parseopts(str);
3880 }
3881
3882 /*
3883 * Exit function. Deletes all hosts associated with this driver.
3884 */
3885
3886 static void __exit blogic_exit(void)
3887 {
3888 struct blogic_adapter *ha, *next;
3889
3890 list_for_each_entry_safe(ha, next, &blogic_host_list, host_list)
3891 blogic_deladapter(ha);
3892 }
3893
3894 __setup("BusLogic=", blogic_setup);
3895
3896 #ifdef MODULE
3897 /*static struct pci_device_id blogic_pci_tbl[] = {
3898 { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER,
3899 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
3900 { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC,
3901 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
3902 { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT,
3903 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
3904 { }
3905 };*/
3906 static const struct pci_device_id blogic_pci_tbl[] = {
3907 {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER)},
3908 {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC)},
3909 {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT)},
3910 {0, },
3911 };
3912 #endif
3913 MODULE_DEVICE_TABLE(pci, blogic_pci_tbl);
3914
3915 module_init(blogic_init);
3916 module_exit(blogic_exit);
Linux with added FPC-III support