binder: Add support for scatter-gather
[linux/fpc-iii.git] / drivers / media / radio / radio-zoltrix.c
blob026e88eef29ce0ef4a577e692d7512f4893ef9b9
1 /*
2 * Zoltrix Radio Plus driver
3 * Copyright 1998 C. van Schaik <carl@leg.uct.ac.za>
5 * BUGS
6 * Due to the inconsistency in reading from the signal flags
7 * it is difficult to get an accurate tuned signal.
9 * It seems that the card is not linear to 0 volume. It cuts off
10 * at a low volume, and it is not possible (at least I have not found)
11 * to get fine volume control over the low volume range.
13 * Some code derived from code by Romolo Manfredini
14 * romolo@bicnet.it
16 * 1999-05-06 - (C. van Schaik)
17 * - Make signal strength and stereo scans
18 * kinder to cpu while in delay
19 * 1999-01-05 - (C. van Schaik)
20 * - Changed tuning to 1/160Mhz accuracy
21 * - Added stereo support
22 * (card defaults to stereo)
23 * (can explicitly force mono on the card)
24 * (can detect if station is in stereo)
25 * - Added unmute function
26 * - Reworked ioctl functions
27 * 2002-07-15 - Fix Stereo typo
29 * 2006-07-24 - Converted to V4L2 API
30 * by Mauro Carvalho Chehab <mchehab@infradead.org>
32 * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com>
34 * Note that this is the driver for the Zoltrix Radio Plus.
35 * This driver does not work for the Zoltrix Radio Plus 108 or the
36 * Zoltrix Radio Plus for Windows.
38 * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
41 #include <linux/module.h> /* Modules */
42 #include <linux/init.h> /* Initdata */
43 #include <linux/ioport.h> /* request_region */
44 #include <linux/delay.h> /* udelay, msleep */
45 #include <linux/videodev2.h> /* kernel radio structs */
46 #include <linux/mutex.h>
47 #include <linux/io.h> /* outb, outb_p */
48 #include <linux/slab.h>
49 #include <media/v4l2-device.h>
50 #include <media/v4l2-ioctl.h>
51 #include "radio-isa.h"
53 MODULE_AUTHOR("C. van Schaik");
54 MODULE_DESCRIPTION("A driver for the Zoltrix Radio Plus.");
55 MODULE_LICENSE("GPL");
56 MODULE_VERSION("0.1.99");
58 #ifndef CONFIG_RADIO_ZOLTRIX_PORT
59 #define CONFIG_RADIO_ZOLTRIX_PORT -1
60 #endif
62 #define ZOLTRIX_MAX 2
64 static int io[ZOLTRIX_MAX] = { [0] = CONFIG_RADIO_ZOLTRIX_PORT,
65 [1 ... (ZOLTRIX_MAX - 1)] = -1 };
66 static int radio_nr[ZOLTRIX_MAX] = { [0 ... (ZOLTRIX_MAX - 1)] = -1 };
68 module_param_array(io, int, NULL, 0444);
69 MODULE_PARM_DESC(io, "I/O addresses of the Zoltrix Radio Plus card (0x20c or 0x30c)");
70 module_param_array(radio_nr, int, NULL, 0444);
71 MODULE_PARM_DESC(radio_nr, "Radio device numbers");
73 struct zoltrix {
74 struct radio_isa_card isa;
75 int curvol;
76 bool muted;
79 static struct radio_isa_card *zoltrix_alloc(void)
81 struct zoltrix *zol = kzalloc(sizeof(*zol), GFP_KERNEL);
83 return zol ? &zol->isa : NULL;
86 static int zoltrix_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
88 struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
90 zol->curvol = vol;
91 zol->muted = mute;
92 if (mute || vol == 0) {
93 outb(0, isa->io);
94 outb(0, isa->io);
95 inb(isa->io + 3); /* Zoltrix needs to be read to confirm */
96 return 0;
99 outb(vol - 1, isa->io);
100 msleep(10);
101 inb(isa->io + 2);
102 return 0;
105 /* tunes the radio to the desired frequency */
106 static int zoltrix_s_frequency(struct radio_isa_card *isa, u32 freq)
108 struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
109 struct v4l2_device *v4l2_dev = &isa->v4l2_dev;
110 unsigned long long bitmask, f, m;
111 bool stereo = isa->stereo;
112 int i;
114 if (freq == 0) {
115 v4l2_warn(v4l2_dev, "cannot set a frequency of 0.\n");
116 return -EINVAL;
119 m = (freq / 160 - 8800) * 2;
120 f = (unsigned long long)m + 0x4d1c;
122 bitmask = 0xc480402c10080000ull;
123 i = 45;
125 outb(0, isa->io);
126 outb(0, isa->io);
127 inb(isa->io + 3); /* Zoltrix needs to be read to confirm */
129 outb(0x40, isa->io);
130 outb(0xc0, isa->io);
132 bitmask = (bitmask ^ ((f & 0xff) << 47) ^ ((f & 0xff00) << 30) ^ (stereo << 31));
133 while (i--) {
134 if ((bitmask & 0x8000000000000000ull) != 0) {
135 outb(0x80, isa->io);
136 udelay(50);
137 outb(0x00, isa->io);
138 udelay(50);
139 outb(0x80, isa->io);
140 udelay(50);
141 } else {
142 outb(0xc0, isa->io);
143 udelay(50);
144 outb(0x40, isa->io);
145 udelay(50);
146 outb(0xc0, isa->io);
147 udelay(50);
149 bitmask *= 2;
151 /* termination sequence */
152 outb(0x80, isa->io);
153 outb(0xc0, isa->io);
154 outb(0x40, isa->io);
155 udelay(1000);
156 inb(isa->io + 2);
157 udelay(1000);
159 return zoltrix_s_mute_volume(isa, zol->muted, zol->curvol);
162 /* Get signal strength */
163 static u32 zoltrix_g_rxsubchans(struct radio_isa_card *isa)
165 struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
166 int a, b;
168 outb(0x00, isa->io); /* This stuff I found to do nothing */
169 outb(zol->curvol, isa->io);
170 msleep(20);
172 a = inb(isa->io);
173 msleep(10);
174 b = inb(isa->io);
176 return (a == b && a == 0xcf) ?
177 V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO;
180 static u32 zoltrix_g_signal(struct radio_isa_card *isa)
182 struct zoltrix *zol = container_of(isa, struct zoltrix, isa);
183 int a, b;
185 outb(0x00, isa->io); /* This stuff I found to do nothing */
186 outb(zol->curvol, isa->io);
187 msleep(20);
189 a = inb(isa->io);
190 msleep(10);
191 b = inb(isa->io);
193 if (a != b)
194 return 0;
196 /* I found this out by playing with a binary scanner on the card io */
197 return (a == 0xcf || a == 0xdf || a == 0xef) ? 0xffff : 0;
200 static int zoltrix_s_stereo(struct radio_isa_card *isa, bool stereo)
202 return zoltrix_s_frequency(isa, isa->freq);
205 static const struct radio_isa_ops zoltrix_ops = {
206 .alloc = zoltrix_alloc,
207 .s_mute_volume = zoltrix_s_mute_volume,
208 .s_frequency = zoltrix_s_frequency,
209 .s_stereo = zoltrix_s_stereo,
210 .g_rxsubchans = zoltrix_g_rxsubchans,
211 .g_signal = zoltrix_g_signal,
214 static const int zoltrix_ioports[] = { 0x20c, 0x30c };
216 static struct radio_isa_driver zoltrix_driver = {
217 .driver = {
218 .match = radio_isa_match,
219 .probe = radio_isa_probe,
220 .remove = radio_isa_remove,
221 .driver = {
222 .name = "radio-zoltrix",
225 .io_params = io,
226 .radio_nr_params = radio_nr,
227 .io_ports = zoltrix_ioports,
228 .num_of_io_ports = ARRAY_SIZE(zoltrix_ioports),
229 .region_size = 2,
230 .card = "Zoltrix Radio Plus",
231 .ops = &zoltrix_ops,
232 .has_stereo = true,
233 .max_volume = 15,
236 static int __init zoltrix_init(void)
238 return isa_register_driver(&zoltrix_driver.driver, ZOLTRIX_MAX);
241 static void __exit zoltrix_exit(void)
243 isa_unregister_driver(&zoltrix_driver.driver);
246 module_init(zoltrix_init);
247 module_exit(zoltrix_exit);