Bluetooth: Remove unneeded initializer for management command table
[linux/fpc-iii.git] / drivers / tty / serial / bfin_sport_uart.h
blobe4510ea135ceb1dc1b6a85d02320cfede400c57d
1 /*
2 * Blackfin On-Chip Sport Emulated UART Driver
4 * Copyright 2006-2008 Analog Devices Inc.
6 * Enter bugs at http://blackfin.uclinux.org/
8 * Licensed under the GPL-2 or later.
9 */
12 * This driver and the hardware supported are in term of EE-191 of ADI.
13 * http://www.analog.com/static/imported-files/application_notes/EE191.pdf
14 * This application note describe how to implement a UART on a Sharc DSP,
15 * but this driver is implemented on Blackfin Processor.
16 * Transmit Frame Sync is not used by this driver to transfer data out.
19 #ifndef _BFIN_SPORT_UART_H
20 #define _BFIN_SPORT_UART_H
22 #define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */
23 #define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */
24 #define OFFSET_TCLKDIV 0x08 /* Transmit Serial Clock Divider Register */
25 #define OFFSET_TFSDIV 0x0C /* Transmit Frame Sync Divider Register */
26 #define OFFSET_TX 0x10 /* Transmit Data Register */
27 #define OFFSET_RX 0x18 /* Receive Data Register */
28 #define OFFSET_RCR1 0x20 /* Receive Configuration 1 Register */
29 #define OFFSET_RCR2 0x24 /* Receive Configuration 2 Register */
30 #define OFFSET_RCLKDIV 0x28 /* Receive Serial Clock Divider Register */
31 #define OFFSET_RFSDIV 0x2c /* Receive Frame Sync Divider Register */
32 #define OFFSET_STAT 0x30 /* Status Register */
34 #define SPORT_GET_TCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR1))
35 #define SPORT_GET_TCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR2))
36 #define SPORT_GET_TCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TCLKDIV))
37 #define SPORT_GET_TFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TFSDIV))
38 #define SPORT_GET_TX(sport) bfin_read16(((sport)->port.membase + OFFSET_TX))
39 #define SPORT_GET_RX(sport) bfin_read16(((sport)->port.membase + OFFSET_RX))
41 * If another interrupt fires while doing a 32-bit read from RX FIFO,
42 * a fake RX underflow error will be generated. So disable interrupts
43 * to prevent interruption while reading the FIFO.
45 #define SPORT_GET_RX32(sport) \
46 ({ \
47 unsigned int __ret; \
48 unsigned long flags; \
49 if (ANOMALY_05000473) \
50 local_irq_save(flags); \
51 __ret = bfin_read32((sport)->port.membase + OFFSET_RX); \
52 if (ANOMALY_05000473) \
53 local_irq_restore(flags); \
54 __ret; \
56 #define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1))
57 #define SPORT_GET_RCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR2))
58 #define SPORT_GET_RCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV))
59 #define SPORT_GET_RFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RFSDIV))
60 #define SPORT_GET_STAT(sport) bfin_read16(((sport)->port.membase + OFFSET_STAT))
62 #define SPORT_PUT_TCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR1), v)
63 #define SPORT_PUT_TCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR2), v)
64 #define SPORT_PUT_TCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCLKDIV), v)
65 #define SPORT_PUT_TFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TFSDIV), v)
66 #define SPORT_PUT_TX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TX), v)
67 #define SPORT_PUT_RX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RX), v)
68 #define SPORT_PUT_RCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR1), v)
69 #define SPORT_PUT_RCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR2), v)
70 #define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v)
71 #define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v)
72 #define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v)
74 #define SPORT_TX_FIFO_SIZE 8
76 #define SPORT_UART_GET_CTS(x) gpio_get_value(x->cts_pin)
77 #define SPORT_UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
78 #define SPORT_UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
80 #if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \
81 || defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \
82 || defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \
83 || defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS)
84 # define CONFIG_SERIAL_BFIN_SPORT_CTSRTS
85 #endif
87 #endif /* _BFIN_SPORT_UART_H */