?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Bluetooth: Remove unneeded initializer for management command table
[linux/fpc-iii.git] / drivers / tty / serial / pch_uart.c
blobea4ffc2ebb2fe9366da26d58b960b0c81e46553c
1 /*
2 *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
3 *
4 *This program is free software; you can redistribute it and/or modify
5 *it under the terms of the GNU General Public License as published by
6 *the Free Software Foundation; version 2 of the License.
7 *
8 *This program is distributed in the hope that it will be useful,
9 *but WITHOUT ANY WARRANTY; without even the implied warranty of
10 *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 *GNU General Public License for more details.
12 *
13 *You should have received a copy of the GNU General Public License
14 *along with this program; if not, write to the Free Software
15 *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
16 */
17 #if defined(CONFIG_SERIAL_PCH_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
18 #define SUPPORT_SYSRQ
19 #endif
20 #include <linux/kernel.h>
21 #include <linux/serial_reg.h>
22 #include <linux/slab.h>
23 #include <linux/module.h>
24 #include <linux/pci.h>
25 #include <linux/console.h>
26 #include <linux/serial_core.h>
27 #include <linux/tty.h>
28 #include <linux/tty_flip.h>
29 #include <linux/interrupt.h>
30 #include <linux/io.h>
31 #include <linux/dmi.h>
32 #include <linux/nmi.h>
33 #include <linux/delay.h>
34
35 #include <linux/debugfs.h>
36 #include <linux/dmaengine.h>
37 #include <linux/pch_dma.h>
38
39 enum {
40 PCH_UART_HANDLED_RX_INT_SHIFT,
41 PCH_UART_HANDLED_TX_INT_SHIFT,
42 PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
43 PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
44 PCH_UART_HANDLED_MS_INT_SHIFT,
45 PCH_UART_HANDLED_LS_INT_SHIFT,
46 };
47
48 enum {
49 PCH_UART_8LINE,
50 PCH_UART_2LINE,
51 };
52
53 #define PCH_UART_DRIVER_DEVICE "ttyPCH"
54
55 /* Set the max number of UART port
56 * Intel EG20T PCH: 4 port
57 * LAPIS Semiconductor ML7213 IOH: 3 port
58 * LAPIS Semiconductor ML7223 IOH: 2 port
59 */
60 #define PCH_UART_NR 4
61
62 #define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
63 #define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
64 #define PCH_UART_HANDLED_RX_ERR_INT (1<<((\
65 PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1))
66 #define PCH_UART_HANDLED_RX_TRG_INT (1<<((\
67 PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
68 #define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
69
70 #define PCH_UART_HANDLED_LS_INT (1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1))
71
72 #define PCH_UART_RBR 0x00
73 #define PCH_UART_THR 0x00
74
75 #define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\
76 PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI)
77 #define PCH_UART_IER_ERBFI 0x00000001
78 #define PCH_UART_IER_ETBEI 0x00000002
79 #define PCH_UART_IER_ELSI 0x00000004
80 #define PCH_UART_IER_EDSSI 0x00000008
81
82 #define PCH_UART_IIR_IP 0x00000001
83 #define PCH_UART_IIR_IID 0x00000006
84 #define PCH_UART_IIR_MSI 0x00000000
85 #define PCH_UART_IIR_TRI 0x00000002
86 #define PCH_UART_IIR_RRI 0x00000004
87 #define PCH_UART_IIR_REI 0x00000006
88 #define PCH_UART_IIR_TOI 0x00000008
89 #define PCH_UART_IIR_FIFO256 0x00000020
90 #define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256
91 #define PCH_UART_IIR_FE 0x000000C0
92
93 #define PCH_UART_FCR_FIFOE 0x00000001
94 #define PCH_UART_FCR_RFR 0x00000002
95 #define PCH_UART_FCR_TFR 0x00000004
96 #define PCH_UART_FCR_DMS 0x00000008
97 #define PCH_UART_FCR_FIFO256 0x00000020
98 #define PCH_UART_FCR_RFTL 0x000000C0
99
100 #define PCH_UART_FCR_RFTL1 0x00000000
101 #define PCH_UART_FCR_RFTL64 0x00000040
102 #define PCH_UART_FCR_RFTL128 0x00000080
103 #define PCH_UART_FCR_RFTL224 0x000000C0
104 #define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64
105 #define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128
106 #define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224
107 #define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64
108 #define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128
109 #define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224
110 #define PCH_UART_FCR_RFTL_SHIFT 6
111
112 #define PCH_UART_LCR_WLS 0x00000003
113 #define PCH_UART_LCR_STB 0x00000004
114 #define PCH_UART_LCR_PEN 0x00000008
115 #define PCH_UART_LCR_EPS 0x00000010
116 #define PCH_UART_LCR_SP 0x00000020
117 #define PCH_UART_LCR_SB 0x00000040
118 #define PCH_UART_LCR_DLAB 0x00000080
119 #define PCH_UART_LCR_NP 0x00000000
120 #define PCH_UART_LCR_OP PCH_UART_LCR_PEN
121 #define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS)
122 #define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP)
123 #define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\
124 PCH_UART_LCR_SP)
125
126 #define PCH_UART_LCR_5BIT 0x00000000
127 #define PCH_UART_LCR_6BIT 0x00000001
128 #define PCH_UART_LCR_7BIT 0x00000002
129 #define PCH_UART_LCR_8BIT 0x00000003
130
131 #define PCH_UART_MCR_DTR 0x00000001
132 #define PCH_UART_MCR_RTS 0x00000002
133 #define PCH_UART_MCR_OUT 0x0000000C
134 #define PCH_UART_MCR_LOOP 0x00000010
135 #define PCH_UART_MCR_AFE 0x00000020
136
137 #define PCH_UART_LSR_DR 0x00000001
138 #define PCH_UART_LSR_ERR (1<<7)
139
140 #define PCH_UART_MSR_DCTS 0x00000001
141 #define PCH_UART_MSR_DDSR 0x00000002
142 #define PCH_UART_MSR_TERI 0x00000004
143 #define PCH_UART_MSR_DDCD 0x00000008
144 #define PCH_UART_MSR_CTS 0x00000010
145 #define PCH_UART_MSR_DSR 0x00000020
146 #define PCH_UART_MSR_RI 0x00000040
147 #define PCH_UART_MSR_DCD 0x00000080
148 #define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\
149 PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD)
150
151 #define PCH_UART_DLL 0x00
152 #define PCH_UART_DLM 0x01
153
154 #define PCH_UART_BRCSR 0x0E
155
156 #define PCH_UART_IID_RLS (PCH_UART_IIR_REI)
157 #define PCH_UART_IID_RDR (PCH_UART_IIR_RRI)
158 #define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
159 #define PCH_UART_IID_THRE (PCH_UART_IIR_TRI)
160 #define PCH_UART_IID_MS (PCH_UART_IIR_MSI)
161
162 #define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP)
163 #define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP)
164 #define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP)
165 #define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P)
166 #define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P)
167 #define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT)
168 #define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT)
169 #define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT)
170 #define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT)
171 #define PCH_UART_HAL_STB1 0
172 #define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB)
173
174 #define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR)
175 #define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR)
176 #define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \
177 PCH_UART_HAL_CLR_RX_FIFO)
178
179 #define PCH_UART_HAL_DMA_MODE0 0
180 #define PCH_UART_HAL_FIFO_DIS 0
181 #define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE)
182 #define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \
183 PCH_UART_FCR_FIFO256)
184 #define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256)
185 #define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1)
186 #define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64)
187 #define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128)
188 #define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224)
189 #define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16)
190 #define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32)
191 #define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56)
192 #define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4)
193 #define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8)
194 #define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14)
195 #define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64)
196 #define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128)
197 #define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224)
198
199 #define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI)
200 #define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI)
201 #define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI)
202 #define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI)
203 #define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK)
204
205 #define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR)
206 #define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS)
207 #define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT)
208 #define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP)
209 #define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE)
210
211 #define PCI_VENDOR_ID_ROHM 0x10DB
212
213 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
214
215 #define DEFAULT_UARTCLK 1843200 /* 1.8432 MHz */
216 #define CMITC_UARTCLK 192000000 /* 192.0000 MHz */
217 #define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */
218 #define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */
219 #define NTC1_UARTCLK 64000000 /* 64.0000 MHz */
220 #define MINNOW_UARTCLK 50000000 /* 50.0000 MHz */
221
222 struct pch_uart_buffer {
223 unsigned char *buf;
224 int size;
225 };
226
227 struct eg20t_port {
228 struct uart_port port;
229 int port_type;
230 void __iomem *membase;
231 resource_size_t mapbase;
232 unsigned int iobase;
233 struct pci_dev *pdev;
234 int fifo_size;
235 unsigned int uartclk;
236 int start_tx;
237 int start_rx;
238 int tx_empty;
239 int trigger;
240 int trigger_level;
241 struct pch_uart_buffer rxbuf;
242 unsigned int dmsr;
243 unsigned int fcr;
244 unsigned int mcr;
245 unsigned int use_dma;
246 struct dma_async_tx_descriptor *desc_tx;
247 struct dma_async_tx_descriptor *desc_rx;
248 struct pch_dma_slave param_tx;
249 struct pch_dma_slave param_rx;
250 struct dma_chan *chan_tx;
251 struct dma_chan *chan_rx;
252 struct scatterlist *sg_tx_p;
253 int nent;
254 struct scatterlist sg_rx;
255 int tx_dma_use;
256 void *rx_buf_virt;
257 dma_addr_t rx_buf_dma;
258
259 struct dentry *debugfs;
260 #define IRQ_NAME_SIZE 17
261 char irq_name[IRQ_NAME_SIZE];
262
263 /* protect the eg20t_port private structure and io access to membase */
264 spinlock_t lock;
265 };
266
267 /**
268 * struct pch_uart_driver_data - private data structure for UART-DMA
269 * @port_type: The number of DMA channel
270 * @line_no: UART port line number (0, 1, 2...)
271 */
272 struct pch_uart_driver_data {
273 int port_type;
274 int line_no;
275 };
276
277 enum pch_uart_num_t {
278 pch_et20t_uart0 = 0,
279 pch_et20t_uart1,
280 pch_et20t_uart2,
281 pch_et20t_uart3,
282 pch_ml7213_uart0,
283 pch_ml7213_uart1,
284 pch_ml7213_uart2,
285 pch_ml7223_uart0,
286 pch_ml7223_uart1,
287 pch_ml7831_uart0,
288 pch_ml7831_uart1,
289 };
290
291 static struct pch_uart_driver_data drv_dat[] = {
292 [pch_et20t_uart0] = {PCH_UART_8LINE, 0},
293 [pch_et20t_uart1] = {PCH_UART_2LINE, 1},
294 [pch_et20t_uart2] = {PCH_UART_2LINE, 2},
295 [pch_et20t_uart3] = {PCH_UART_2LINE, 3},
296 [pch_ml7213_uart0] = {PCH_UART_8LINE, 0},
297 [pch_ml7213_uart1] = {PCH_UART_2LINE, 1},
298 [pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
299 [pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
300 [pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
301 [pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
302 [pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
303 };
304
305 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
306 static struct eg20t_port *pch_uart_ports[PCH_UART_NR];
307 #endif
308 static unsigned int default_baud = 9600;
309 static unsigned int user_uartclk = 0;
310 static const int trigger_level_256[4] = { 1, 64, 128, 224 };
311 static const int trigger_level_64[4] = { 1, 16, 32, 56 };
312 static const int trigger_level_16[4] = { 1, 4, 8, 14 };
313 static const int trigger_level_1[4] = { 1, 1, 1, 1 };
314
315 #ifdef CONFIG_DEBUG_FS
316
317 #define PCH_REGS_BUFSIZE 1024
318
319
320 static ssize_t port_show_regs(struct file *file, char __user *user_buf,
321 size_t count, loff_t *ppos)
322 {
323 struct eg20t_port *priv = file->private_data;
324 char *buf;
325 u32 len = 0;
326 ssize_t ret;
327 unsigned char lcr;
328
329 buf = kzalloc(PCH_REGS_BUFSIZE, GFP_KERNEL);
330 if (!buf)
331 return 0;
332
333 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
334 "PCH EG20T port[%d] regs:\n", priv->port.line);
335
336 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
337 "=================================\n");
338 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
339 "IER: \t0x%02x\n", ioread8(priv->membase + UART_IER));
340 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
341 "IIR: \t0x%02x\n", ioread8(priv->membase + UART_IIR));
342 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
343 "LCR: \t0x%02x\n", ioread8(priv->membase + UART_LCR));
344 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
345 "MCR: \t0x%02x\n", ioread8(priv->membase + UART_MCR));
346 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
347 "LSR: \t0x%02x\n", ioread8(priv->membase + UART_LSR));
348 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
349 "MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR));
350 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
351 "BRCSR: \t0x%02x\n",
352 ioread8(priv->membase + PCH_UART_BRCSR));
353
354 lcr = ioread8(priv->membase + UART_LCR);
355 iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
356 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
357 "DLL: \t0x%02x\n", ioread8(priv->membase + UART_DLL));
358 len += snprintf(buf + len, PCH_REGS_BUFSIZE - len,
359 "DLM: \t0x%02x\n", ioread8(priv->membase + UART_DLM));
360 iowrite8(lcr, priv->membase + UART_LCR);
361
362 if (len > PCH_REGS_BUFSIZE)
363 len = PCH_REGS_BUFSIZE;
364
365 ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
366 kfree(buf);
367 return ret;
368 }
369
370 static const struct file_operations port_regs_ops = {
371 .owner = THIS_MODULE,
372 .open = simple_open,
373 .read = port_show_regs,
374 .llseek = default_llseek,
375 };
376 #endif /* CONFIG_DEBUG_FS */
377
378 static struct dmi_system_id pch_uart_dmi_table[] = {
379 {
380 .ident = "CM-iTC",
381 {
382 DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"),
383 },
384 (void *)CMITC_UARTCLK,
385 },
386 {
387 .ident = "FRI2",
388 {
389 DMI_MATCH(DMI_BIOS_VERSION, "FRI2"),
390 },
391 (void *)FRI2_64_UARTCLK,
392 },
393 {
394 .ident = "Fish River Island II",
395 {
396 DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"),
397 },
398 (void *)FRI2_48_UARTCLK,
399 },
400 {
401 .ident = "COMe-mTT",
402 {
403 DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"),
404 },
405 (void *)NTC1_UARTCLK,
406 },
407 {
408 .ident = "nanoETXexpress-TT",
409 {
410 DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"),
411 },
412 (void *)NTC1_UARTCLK,
413 },
414 {
415 .ident = "MinnowBoard",
416 {
417 DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
418 },
419 (void *)MINNOW_UARTCLK,
420 },
421 };
422
423 /* Return UART clock, checking for board specific clocks. */
424 static unsigned int pch_uart_get_uartclk(void)
425 {
426 const struct dmi_system_id *d;
427
428 if (user_uartclk)
429 return user_uartclk;
430
431 d = dmi_first_match(pch_uart_dmi_table);
432 if (d)
433 return (unsigned long)d->driver_data;
434
435 return DEFAULT_UARTCLK;
436 }
437
438 static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv,
439 unsigned int flag)
440 {
441 u8 ier = ioread8(priv->membase + UART_IER);
442 ier |= flag & PCH_UART_IER_MASK;
443 iowrite8(ier, priv->membase + UART_IER);
444 }
445
446 static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv,
447 unsigned int flag)
448 {
449 u8 ier = ioread8(priv->membase + UART_IER);
450 ier &= ~(flag & PCH_UART_IER_MASK);
451 iowrite8(ier, priv->membase + UART_IER);
452 }
453
454 static int pch_uart_hal_set_line(struct eg20t_port *priv, unsigned int baud,
455 unsigned int parity, unsigned int bits,
456 unsigned int stb)
457 {
458 unsigned int dll, dlm, lcr;
459 int div;
460
461 div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud);
462 if (div < 0 || USHRT_MAX <= div) {
463 dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
464 return -EINVAL;
465 }
466
467 dll = (unsigned int)div & 0x00FFU;
468 dlm = ((unsigned int)div >> 8) & 0x00FFU;
469
470 if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
471 dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
472 return -EINVAL;
473 }
474
475 if (bits & ~PCH_UART_LCR_WLS) {
476 dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
477 return -EINVAL;
478 }
479
480 if (stb & ~PCH_UART_LCR_STB) {
481 dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
482 return -EINVAL;
483 }
484
485 lcr = parity;
486 lcr |= bits;
487 lcr |= stb;
488
489 dev_dbg(priv->port.dev, "%s:baud = %u, div = %04x, lcr = %02x (%lu)\n",
490 __func__, baud, div, lcr, jiffies);
491 iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
492 iowrite8(dll, priv->membase + PCH_UART_DLL);
493 iowrite8(dlm, priv->membase + PCH_UART_DLM);
494 iowrite8(lcr, priv->membase + UART_LCR);
495
496 return 0;
497 }
498
499 static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
500 unsigned int flag)
501 {
502 if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
503 dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
504 __func__, flag);
505 return -EINVAL;
506 }
507
508 iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR);
509 iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag,
510 priv->membase + UART_FCR);
511 iowrite8(priv->fcr, priv->membase + UART_FCR);
512
513 return 0;
514 }
515
516 static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
517 unsigned int dmamode,
518 unsigned int fifo_size, unsigned int trigger)
519 {
520 u8 fcr;
521
522 if (dmamode & ~PCH_UART_FCR_DMS) {
523 dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
524 __func__, dmamode);
525 return -EINVAL;
526 }
527
528 if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
529 dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
530 __func__, fifo_size);
531 return -EINVAL;
532 }
533
534 if (trigger & ~PCH_UART_FCR_RFTL) {
535 dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
536 __func__, trigger);
537 return -EINVAL;
538 }
539
540 switch (priv->fifo_size) {
541 case 256:
542 priv->trigger_level =
543 trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT];
544 break;
545 case 64:
546 priv->trigger_level =
547 trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT];
548 break;
549 case 16:
550 priv->trigger_level =
551 trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT];
552 break;
553 default:
554 priv->trigger_level =
555 trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT];
556 break;
557 }
558 fcr =
559 dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR;
560 iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR);
561 iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR,
562 priv->membase + UART_FCR);
563 iowrite8(fcr, priv->membase + UART_FCR);
564 priv->fcr = fcr;
565
566 return 0;
567 }
568
569 static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
570 {
571 unsigned int msr = ioread8(priv->membase + UART_MSR);
572 priv->dmsr = msr & PCH_UART_MSR_DELTA;
573 return (u8)msr;
574 }
575
576 static void pch_uart_hal_write(struct eg20t_port *priv,
577 const unsigned char *buf, int tx_size)
578 {
579 int i;
580 unsigned int thr;
581
582 for (i = 0; i < tx_size;) {
583 thr = buf[i++];
584 iowrite8(thr, priv->membase + PCH_UART_THR);
585 }
586 }
587
588 static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
589 int rx_size)
590 {
591 int i;
592 u8 rbr, lsr;
593 struct uart_port *port = &priv->port;
594
595 lsr = ioread8(priv->membase + UART_LSR);
596 for (i = 0, lsr = ioread8(priv->membase + UART_LSR);
597 i < rx_size && lsr & (UART_LSR_DR | UART_LSR_BI);
598 lsr = ioread8(priv->membase + UART_LSR)) {
599 rbr = ioread8(priv->membase + PCH_UART_RBR);
600
601 if (lsr & UART_LSR_BI) {
602 port->icount.brk++;
603 if (uart_handle_break(port))
604 continue;
605 }
606 #ifdef SUPPORT_SYSRQ
607 if (port->sysrq) {
608 if (uart_handle_sysrq_char(port, rbr))
609 continue;
610 }
611 #endif
612
613 buf[i++] = rbr;
614 }
615 return i;
616 }
617
618 static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv)
619 {
620 return ioread8(priv->membase + UART_IIR) &\
621 (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP);
622 }
623
624 static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
625 {
626 return ioread8(priv->membase + UART_LSR);
627 }
628
629 static void pch_uart_hal_set_break(struct eg20t_port *priv, int on)
630 {
631 unsigned int lcr;
632
633 lcr = ioread8(priv->membase + UART_LCR);
634 if (on)
635 lcr |= PCH_UART_LCR_SB;
636 else
637 lcr &= ~PCH_UART_LCR_SB;
638
639 iowrite8(lcr, priv->membase + UART_LCR);
640 }
641
642 static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
643 int size)
644 {
645 struct uart_port *port = &priv->port;
646 struct tty_port *tport = &port->state->port;
647
648 tty_insert_flip_string(tport, buf, size);
649 tty_flip_buffer_push(tport);
650
651 return 0;
652 }
653
654 static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
655 {
656 int ret = 0;
657 struct uart_port *port = &priv->port;
658
659 if (port->x_char) {
660 dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
661 __func__, port->x_char, jiffies);
662 buf[0] = port->x_char;
663 port->x_char = 0;
664 ret = 1;
665 }
666
667 return ret;
668 }
669
670 static int dma_push_rx(struct eg20t_port *priv, int size)
671 {
672 int room;
673 struct uart_port *port = &priv->port;
674 struct tty_port *tport = &port->state->port;
675
676 room = tty_buffer_request_room(tport, size);
677
678 if (room < size)
679 dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
680 size - room);
681 if (!room)
682 return 0;
683
684 tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size);
685
686 port->icount.rx += room;
687
688 return room;
689 }
690
691 static void pch_free_dma(struct uart_port *port)
692 {
693 struct eg20t_port *priv;
694 priv = container_of(port, struct eg20t_port, port);
695
696 if (priv->chan_tx) {
697 dma_release_channel(priv->chan_tx);
698 priv->chan_tx = NULL;
699 }
700 if (priv->chan_rx) {
701 dma_release_channel(priv->chan_rx);
702 priv->chan_rx = NULL;
703 }
704
705 if (priv->rx_buf_dma) {
706 dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt,
707 priv->rx_buf_dma);
708 priv->rx_buf_virt = NULL;
709 priv->rx_buf_dma = 0;
710 }
711
712 return;
713 }
714
715 static bool filter(struct dma_chan *chan, void *slave)
716 {
717 struct pch_dma_slave *param = slave;
718
719 if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
720 chan->device->dev)) {
721 chan->private = param;
722 return true;
723 } else {
724 return false;
725 }
726 }
727
728 static void pch_request_dma(struct uart_port *port)
729 {
730 dma_cap_mask_t mask;
731 struct dma_chan *chan;
732 struct pci_dev *dma_dev;
733 struct pch_dma_slave *param;
734 struct eg20t_port *priv =
735 container_of(port, struct eg20t_port, port);
736 dma_cap_zero(mask);
737 dma_cap_set(DMA_SLAVE, mask);
738
739 /* Get DMA's dev information */
740 dma_dev = pci_get_slot(priv->pdev->bus,
741 PCI_DEVFN(PCI_SLOT(priv->pdev->devfn), 0));
742
743 /* Set Tx DMA */
744 param = &priv->param_tx;
745 param->dma_dev = &dma_dev->dev;
746 param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
747
748 param->tx_reg = port->mapbase + UART_TX;
749 chan = dma_request_channel(mask, filter, param);
750 if (!chan) {
751 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
752 __func__);
753 return;
754 }
755 priv->chan_tx = chan;
756
757 /* Set Rx DMA */
758 param = &priv->param_rx;
759 param->dma_dev = &dma_dev->dev;
760 param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
761
762 param->rx_reg = port->mapbase + UART_RX;
763 chan = dma_request_channel(mask, filter, param);
764 if (!chan) {
765 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
766 __func__);
767 dma_release_channel(priv->chan_tx);
768 priv->chan_tx = NULL;
769 return;
770 }
771
772 /* Get Consistent memory for DMA */
773 priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
774 &priv->rx_buf_dma, GFP_KERNEL);
775 priv->chan_rx = chan;
776 }
777
778 static void pch_dma_rx_complete(void *arg)
779 {
780 struct eg20t_port *priv = arg;
781 struct uart_port *port = &priv->port;
782 int count;
783
784 dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
785 count = dma_push_rx(priv, priv->trigger_level);
786 if (count)
787 tty_flip_buffer_push(&port->state->port);
788 async_tx_ack(priv->desc_rx);
789 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
790 PCH_UART_HAL_RX_ERR_INT);
791 }
792
793 static void pch_dma_tx_complete(void *arg)
794 {
795 struct eg20t_port *priv = arg;
796 struct uart_port *port = &priv->port;
797 struct circ_buf *xmit = &port->state->xmit;
798 struct scatterlist *sg = priv->sg_tx_p;
799 int i;
800
801 for (i = 0; i < priv->nent; i++, sg++) {
802 xmit->tail += sg_dma_len(sg);
803 port->icount.tx += sg_dma_len(sg);
804 }
805 xmit->tail &= UART_XMIT_SIZE - 1;
806 async_tx_ack(priv->desc_tx);
807 dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
808 priv->tx_dma_use = 0;
809 priv->nent = 0;
810 kfree(priv->sg_tx_p);
811 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
812 }
813
814 static int pop_tx(struct eg20t_port *priv, int size)
815 {
816 int count = 0;
817 struct uart_port *port = &priv->port;
818 struct circ_buf *xmit = &port->state->xmit;
819
820 if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size)
821 goto pop_tx_end;
822
823 do {
824 int cnt_to_end =
825 CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
826 int sz = min(size - count, cnt_to_end);
827 pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz);
828 xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
829 count += sz;
830 } while (!uart_circ_empty(xmit) && count < size);
831
832 pop_tx_end:
833 dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n",
834 count, size - count, jiffies);
835
836 return count;
837 }
838
839 static int handle_rx_to(struct eg20t_port *priv)
840 {
841 struct pch_uart_buffer *buf;
842 int rx_size;
843 int ret;
844 if (!priv->start_rx) {
845 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
846 PCH_UART_HAL_RX_ERR_INT);
847 return 0;
848 }
849 buf = &priv->rxbuf;
850 do {
851 rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
852 ret = push_rx(priv, buf->buf, rx_size);
853 if (ret)
854 return 0;
855 } while (rx_size == buf->size);
856
857 return PCH_UART_HANDLED_RX_INT;
858 }
859
860 static int handle_rx(struct eg20t_port *priv)
861 {
862 return handle_rx_to(priv);
863 }
864
865 static int dma_handle_rx(struct eg20t_port *priv)
866 {
867 struct uart_port *port = &priv->port;
868 struct dma_async_tx_descriptor *desc;
869 struct scatterlist *sg;
870
871 priv = container_of(port, struct eg20t_port, port);
872 sg = &priv->sg_rx;
873
874 sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
875
876 sg_dma_len(sg) = priv->trigger_level;
877
878 sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
879 sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
880 ~PAGE_MASK);
881
882 sg_dma_address(sg) = priv->rx_buf_dma;
883
884 desc = dmaengine_prep_slave_sg(priv->chan_rx,
885 sg, 1, DMA_DEV_TO_MEM,
886 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
887
888 if (!desc)
889 return 0;
890
891 priv->desc_rx = desc;
892 desc->callback = pch_dma_rx_complete;
893 desc->callback_param = priv;
894 desc->tx_submit(desc);
895 dma_async_issue_pending(priv->chan_rx);
896
897 return PCH_UART_HANDLED_RX_INT;
898 }
899
900 static unsigned int handle_tx(struct eg20t_port *priv)
901 {
902 struct uart_port *port = &priv->port;
903 struct circ_buf *xmit = &port->state->xmit;
904 int fifo_size;
905 int tx_size;
906 int size;
907 int tx_empty;
908
909 if (!priv->start_tx) {
910 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
911 __func__, jiffies);
912 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
913 priv->tx_empty = 1;
914 return 0;
915 }
916
917 fifo_size = max(priv->fifo_size, 1);
918 tx_empty = 1;
919 if (pop_tx_x(priv, xmit->buf)) {
920 pch_uart_hal_write(priv, xmit->buf, 1);
921 port->icount.tx++;
922 tx_empty = 0;
923 fifo_size--;
924 }
925 size = min(xmit->head - xmit->tail, fifo_size);
926 if (size < 0)
927 size = fifo_size;
928
929 tx_size = pop_tx(priv, size);
930 if (tx_size > 0) {
931 port->icount.tx += tx_size;
932 tx_empty = 0;
933 }
934
935 priv->tx_empty = tx_empty;
936
937 if (tx_empty) {
938 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
939 uart_write_wakeup(port);
940 }
941
942 return PCH_UART_HANDLED_TX_INT;
943 }
944
945 static unsigned int dma_handle_tx(struct eg20t_port *priv)
946 {
947 struct uart_port *port = &priv->port;
948 struct circ_buf *xmit = &port->state->xmit;
949 struct scatterlist *sg;
950 int nent;
951 int fifo_size;
952 int tx_empty;
953 struct dma_async_tx_descriptor *desc;
954 int num;
955 int i;
956 int bytes;
957 int size;
958 int rem;
959
960 if (!priv->start_tx) {
961 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
962 __func__, jiffies);
963 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
964 priv->tx_empty = 1;
965 return 0;
966 }
967
968 if (priv->tx_dma_use) {
969 dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
970 __func__, jiffies);
971 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
972 priv->tx_empty = 1;
973 return 0;
974 }
975
976 fifo_size = max(priv->fifo_size, 1);
977 tx_empty = 1;
978 if (pop_tx_x(priv, xmit->buf)) {
979 pch_uart_hal_write(priv, xmit->buf, 1);
980 port->icount.tx++;
981 tx_empty = 0;
982 fifo_size--;
983 }
984
985 bytes = min((int)CIRC_CNT(xmit->head, xmit->tail,
986 UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
987 xmit->tail, UART_XMIT_SIZE));
988 if (!bytes) {
989 dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
990 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
991 uart_write_wakeup(port);
992 return 0;
993 }
994
995 if (bytes > fifo_size) {
996 num = bytes / fifo_size + 1;
997 size = fifo_size;
998 rem = bytes % fifo_size;
999 } else {
1000 num = 1;
1001 size = bytes;
1002 rem = bytes;
1003 }
1004
1005 dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
1006 __func__, num, size, rem);
1007
1008 priv->tx_dma_use = 1;
1009
1010 priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
1011 if (!priv->sg_tx_p) {
1012 dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__);
1013 return 0;
1014 }
1015
1016 sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
1017 sg = priv->sg_tx_p;
1018
1019 for (i = 0; i < num; i++, sg++) {
1020 if (i == (num - 1))
1021 sg_set_page(sg, virt_to_page(xmit->buf),
1022 rem, fifo_size * i);
1023 else
1024 sg_set_page(sg, virt_to_page(xmit->buf),
1025 size, fifo_size * i);
1026 }
1027
1028 sg = priv->sg_tx_p;
1029 nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
1030 if (!nent) {
1031 dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
1032 return 0;
1033 }
1034 priv->nent = nent;
1035
1036 for (i = 0; i < nent; i++, sg++) {
1037 sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
1038 fifo_size * i;
1039 sg_dma_address(sg) = (sg_dma_address(sg) &
1040 ~(UART_XMIT_SIZE - 1)) + sg->offset;
1041 if (i == (nent - 1))
1042 sg_dma_len(sg) = rem;
1043 else
1044 sg_dma_len(sg) = size;
1045 }
1046
1047 desc = dmaengine_prep_slave_sg(priv->chan_tx,
1048 priv->sg_tx_p, nent, DMA_MEM_TO_DEV,
1049 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1050 if (!desc) {
1051 dev_err(priv->port.dev, "%s:dmaengine_prep_slave_sg Failed\n",
1052 __func__);
1053 return 0;
1054 }
1055 dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
1056 priv->desc_tx = desc;
1057 desc->callback = pch_dma_tx_complete;
1058 desc->callback_param = priv;
1059
1060 desc->tx_submit(desc);
1061
1062 dma_async_issue_pending(priv->chan_tx);
1063
1064 return PCH_UART_HANDLED_TX_INT;
1065 }
1066
1067 static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
1068 {
1069 struct uart_port *port = &priv->port;
1070 struct tty_struct *tty = tty_port_tty_get(&port->state->port);
1071 char *error_msg[5] = {};
1072 int i = 0;
1073
1074 if (lsr & PCH_UART_LSR_ERR)
1075 error_msg[i++] = "Error data in FIFO\n";
1076
1077 if (lsr & UART_LSR_FE) {
1078 port->icount.frame++;
1079 error_msg[i++] = " Framing Error\n";
1080 }
1081
1082 if (lsr & UART_LSR_PE) {
1083 port->icount.parity++;
1084 error_msg[i++] = " Parity Error\n";
1085 }
1086
1087 if (lsr & UART_LSR_OE) {
1088 port->icount.overrun++;
1089 error_msg[i++] = " Overrun Error\n";
1090 }
1091
1092 if (tty == NULL) {
1093 for (i = 0; error_msg[i] != NULL; i++)
1094 dev_err(&priv->pdev->dev, error_msg[i]);
1095 } else {
1096 tty_kref_put(tty);
1097 }
1098 }
1099
1100 static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
1101 {
1102 struct eg20t_port *priv = dev_id;
1103 unsigned int handled;
1104 u8 lsr;
1105 int ret = 0;
1106 unsigned char iid;
1107 unsigned long flags;
1108 int next = 1;
1109 u8 msr;
1110
1111 spin_lock_irqsave(&priv->lock, flags);
1112 handled = 0;
1113 while (next) {
1114 iid = pch_uart_hal_get_iid(priv);
1115 if (iid & PCH_UART_IIR_IP) /* No Interrupt */
1116 break;
1117 switch (iid) {
1118 case PCH_UART_IID_RLS: /* Receiver Line Status */
1119 lsr = pch_uart_hal_get_line_status(priv);
1120 if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE |
1121 UART_LSR_PE | UART_LSR_OE)) {
1122 pch_uart_err_ir(priv, lsr);
1123 ret = PCH_UART_HANDLED_RX_ERR_INT;
1124 } else {
1125 ret = PCH_UART_HANDLED_LS_INT;
1126 }
1127 break;
1128 case PCH_UART_IID_RDR: /* Received Data Ready */
1129 if (priv->use_dma) {
1130 pch_uart_hal_disable_interrupt(priv,
1131 PCH_UART_HAL_RX_INT |
1132 PCH_UART_HAL_RX_ERR_INT);
1133 ret = dma_handle_rx(priv);
1134 if (!ret)
1135 pch_uart_hal_enable_interrupt(priv,
1136 PCH_UART_HAL_RX_INT |
1137 PCH_UART_HAL_RX_ERR_INT);
1138 } else {
1139 ret = handle_rx(priv);
1140 }
1141 break;
1142 case PCH_UART_IID_RDR_TO: /* Received Data Ready
1143 (FIFO Timeout) */
1144 ret = handle_rx_to(priv);
1145 break;
1146 case PCH_UART_IID_THRE: /* Transmitter Holding Register
1147 Empty */
1148 if (priv->use_dma)
1149 ret = dma_handle_tx(priv);
1150 else
1151 ret = handle_tx(priv);
1152 break;
1153 case PCH_UART_IID_MS: /* Modem Status */
1154 msr = pch_uart_hal_get_modem(priv);
1155 next = 0; /* MS ir prioirty is the lowest. So, MS ir
1156 means final interrupt */
1157 if ((msr & UART_MSR_ANY_DELTA) == 0)
1158 break;
1159 ret |= PCH_UART_HANDLED_MS_INT;
1160 break;
1161 default: /* Never junp to this label */
1162 dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__,
1163 iid, jiffies);
1164 ret = -1;
1165 next = 0;
1166 break;
1167 }
1168 handled |= (unsigned int)ret;
1169 }
1170
1171 spin_unlock_irqrestore(&priv->lock, flags);
1172 return IRQ_RETVAL(handled);
1173 }
1174
1175 /* This function tests whether the transmitter fifo and shifter for the port
1176 described by 'port' is empty. */
1177 static unsigned int pch_uart_tx_empty(struct uart_port *port)
1178 {
1179 struct eg20t_port *priv;
1180
1181 priv = container_of(port, struct eg20t_port, port);
1182 if (priv->tx_empty)
1183 return TIOCSER_TEMT;
1184 else
1185 return 0;
1186 }
1187
1188 /* Returns the current state of modem control inputs. */
1189 static unsigned int pch_uart_get_mctrl(struct uart_port *port)
1190 {
1191 struct eg20t_port *priv;
1192 u8 modem;
1193 unsigned int ret = 0;
1194
1195 priv = container_of(port, struct eg20t_port, port);
1196 modem = pch_uart_hal_get_modem(priv);
1197
1198 if (modem & UART_MSR_DCD)
1199 ret |= TIOCM_CAR;
1200
1201 if (modem & UART_MSR_RI)
1202 ret |= TIOCM_RNG;
1203
1204 if (modem & UART_MSR_DSR)
1205 ret |= TIOCM_DSR;
1206
1207 if (modem & UART_MSR_CTS)
1208 ret |= TIOCM_CTS;
1209
1210 return ret;
1211 }
1212
1213 static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1214 {
1215 u32 mcr = 0;
1216 struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
1217
1218 if (mctrl & TIOCM_DTR)
1219 mcr |= UART_MCR_DTR;
1220 if (mctrl & TIOCM_RTS)
1221 mcr |= UART_MCR_RTS;
1222 if (mctrl & TIOCM_LOOP)
1223 mcr |= UART_MCR_LOOP;
1224
1225 if (priv->mcr & UART_MCR_AFE)
1226 mcr |= UART_MCR_AFE;
1227
1228 if (mctrl)
1229 iowrite8(mcr, priv->membase + UART_MCR);
1230 }
1231
1232 static void pch_uart_stop_tx(struct uart_port *port)
1233 {
1234 struct eg20t_port *priv;
1235 priv = container_of(port, struct eg20t_port, port);
1236 priv->start_tx = 0;
1237 priv->tx_dma_use = 0;
1238 }
1239
1240 static void pch_uart_start_tx(struct uart_port *port)
1241 {
1242 struct eg20t_port *priv;
1243
1244 priv = container_of(port, struct eg20t_port, port);
1245
1246 if (priv->use_dma) {
1247 if (priv->tx_dma_use) {
1248 dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
1249 __func__);
1250 return;
1251 }
1252 }
1253
1254 priv->start_tx = 1;
1255 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
1256 }
1257
1258 static void pch_uart_stop_rx(struct uart_port *port)
1259 {
1260 struct eg20t_port *priv;
1261 priv = container_of(port, struct eg20t_port, port);
1262 priv->start_rx = 0;
1263 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
1264 PCH_UART_HAL_RX_ERR_INT);
1265 }
1266
1267 /* Enable the modem status interrupts. */
1268 static void pch_uart_enable_ms(struct uart_port *port)
1269 {
1270 struct eg20t_port *priv;
1271 priv = container_of(port, struct eg20t_port, port);
1272 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT);
1273 }
1274
1275 /* Control the transmission of a break signal. */
1276 static void pch_uart_break_ctl(struct uart_port *port, int ctl)
1277 {
1278 struct eg20t_port *priv;
1279 unsigned long flags;
1280
1281 priv = container_of(port, struct eg20t_port, port);
1282 spin_lock_irqsave(&priv->lock, flags);
1283 pch_uart_hal_set_break(priv, ctl);
1284 spin_unlock_irqrestore(&priv->lock, flags);
1285 }
1286
1287 /* Grab any interrupt resources and initialise any low level driver state. */
1288 static int pch_uart_startup(struct uart_port *port)
1289 {
1290 struct eg20t_port *priv;
1291 int ret;
1292 int fifo_size;
1293 int trigger_level;
1294
1295 priv = container_of(port, struct eg20t_port, port);
1296 priv->tx_empty = 1;
1297
1298 if (port->uartclk)
1299 priv->uartclk = port->uartclk;
1300 else
1301 port->uartclk = priv->uartclk;
1302
1303 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1304 ret = pch_uart_hal_set_line(priv, default_baud,
1305 PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
1306 PCH_UART_HAL_STB1);
1307 if (ret)
1308 return ret;
1309
1310 switch (priv->fifo_size) {
1311 case 256:
1312 fifo_size = PCH_UART_HAL_FIFO256;
1313 break;
1314 case 64:
1315 fifo_size = PCH_UART_HAL_FIFO64;
1316 break;
1317 case 16:
1318 fifo_size = PCH_UART_HAL_FIFO16;
1319 break;
1320 case 1:
1321 default:
1322 fifo_size = PCH_UART_HAL_FIFO_DIS;
1323 break;
1324 }
1325
1326 switch (priv->trigger) {
1327 case PCH_UART_HAL_TRIGGER1:
1328 trigger_level = 1;
1329 break;
1330 case PCH_UART_HAL_TRIGGER_L:
1331 trigger_level = priv->fifo_size / 4;
1332 break;
1333 case PCH_UART_HAL_TRIGGER_M:
1334 trigger_level = priv->fifo_size / 2;
1335 break;
1336 case PCH_UART_HAL_TRIGGER_H:
1337 default:
1338 trigger_level = priv->fifo_size - (priv->fifo_size / 8);
1339 break;
1340 }
1341
1342 priv->trigger_level = trigger_level;
1343 ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1344 fifo_size, priv->trigger);
1345 if (ret < 0)
1346 return ret;
1347
1348 ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
1349 priv->irq_name, priv);
1350 if (ret < 0)
1351 return ret;
1352
1353 if (priv->use_dma)
1354 pch_request_dma(port);
1355
1356 priv->start_rx = 1;
1357 pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
1358 PCH_UART_HAL_RX_ERR_INT);
1359 uart_update_timeout(port, CS8, default_baud);
1360
1361 return 0;
1362 }
1363
1364 static void pch_uart_shutdown(struct uart_port *port)
1365 {
1366 struct eg20t_port *priv;
1367 int ret;
1368
1369 priv = container_of(port, struct eg20t_port, port);
1370 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1371 pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO);
1372 ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1373 PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
1374 if (ret)
1375 dev_err(priv->port.dev,
1376 "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
1377
1378 pch_free_dma(port);
1379
1380 free_irq(priv->port.irq, priv);
1381 }
1382
1383 /* Change the port parameters, including word length, parity, stop
1384 *bits. Update read_status_mask and ignore_status_mask to indicate
1385 *the types of events we are interested in receiving. */
1386 static void pch_uart_set_termios(struct uart_port *port,
1387 struct ktermios *termios, struct ktermios *old)
1388 {
1389 int rtn;
1390 unsigned int baud, parity, bits, stb;
1391 struct eg20t_port *priv;
1392 unsigned long flags;
1393
1394 priv = container_of(port, struct eg20t_port, port);
1395 switch (termios->c_cflag & CSIZE) {
1396 case CS5:
1397 bits = PCH_UART_HAL_5BIT;
1398 break;
1399 case CS6:
1400 bits = PCH_UART_HAL_6BIT;
1401 break;
1402 case CS7:
1403 bits = PCH_UART_HAL_7BIT;
1404 break;
1405 default: /* CS8 */
1406 bits = PCH_UART_HAL_8BIT;
1407 break;
1408 }
1409 if (termios->c_cflag & CSTOPB)
1410 stb = PCH_UART_HAL_STB2;
1411 else
1412 stb = PCH_UART_HAL_STB1;
1413
1414 if (termios->c_cflag & PARENB) {
1415 if (termios->c_cflag & PARODD)
1416 parity = PCH_UART_HAL_PARITY_ODD;
1417 else
1418 parity = PCH_UART_HAL_PARITY_EVEN;
1419
1420 } else
1421 parity = PCH_UART_HAL_PARITY_NONE;
1422
1423 /* Only UART0 has auto hardware flow function */
1424 if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
1425 priv->mcr |= UART_MCR_AFE;
1426 else
1427 priv->mcr &= ~UART_MCR_AFE;
1428
1429 termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
1430
1431 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
1432
1433 spin_lock_irqsave(&priv->lock, flags);
1434 spin_lock(&port->lock);
1435
1436 uart_update_timeout(port, termios->c_cflag, baud);
1437 rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
1438 if (rtn)
1439 goto out;
1440
1441 pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
1442 /* Don't rewrite B0 */
1443 if (tty_termios_baud_rate(termios))
1444 tty_termios_encode_baud_rate(termios, baud, baud);
1445
1446 out:
1447 spin_unlock(&port->lock);
1448 spin_unlock_irqrestore(&priv->lock, flags);
1449 }
1450
1451 static const char *pch_uart_type(struct uart_port *port)
1452 {
1453 return KBUILD_MODNAME;
1454 }
1455
1456 static void pch_uart_release_port(struct uart_port *port)
1457 {
1458 struct eg20t_port *priv;
1459
1460 priv = container_of(port, struct eg20t_port, port);
1461 pci_iounmap(priv->pdev, priv->membase);
1462 pci_release_regions(priv->pdev);
1463 }
1464
1465 static int pch_uart_request_port(struct uart_port *port)
1466 {
1467 struct eg20t_port *priv;
1468 int ret;
1469 void __iomem *membase;
1470
1471 priv = container_of(port, struct eg20t_port, port);
1472 ret = pci_request_regions(priv->pdev, KBUILD_MODNAME);
1473 if (ret < 0)
1474 return -EBUSY;
1475
1476 membase = pci_iomap(priv->pdev, 1, 0);
1477 if (!membase) {
1478 pci_release_regions(priv->pdev);
1479 return -EBUSY;
1480 }
1481 priv->membase = port->membase = membase;
1482
1483 return 0;
1484 }
1485
1486 static void pch_uart_config_port(struct uart_port *port, int type)
1487 {
1488 struct eg20t_port *priv;
1489
1490 priv = container_of(port, struct eg20t_port, port);
1491 if (type & UART_CONFIG_TYPE) {
1492 port->type = priv->port_type;
1493 pch_uart_request_port(port);
1494 }
1495 }
1496
1497 static int pch_uart_verify_port(struct uart_port *port,
1498 struct serial_struct *serinfo)
1499 {
1500 struct eg20t_port *priv;
1501
1502 priv = container_of(port, struct eg20t_port, port);
1503 if (serinfo->flags & UPF_LOW_LATENCY) {
1504 dev_info(priv->port.dev,
1505 "PCH UART : Use PIO Mode (without DMA)\n");
1506 priv->use_dma = 0;
1507 serinfo->flags &= ~UPF_LOW_LATENCY;
1508 } else {
1509 #ifndef CONFIG_PCH_DMA
1510 dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
1511 __func__);
1512 return -EOPNOTSUPP;
1513 #endif
1514 if (!priv->use_dma) {
1515 pch_request_dma(port);
1516 if (priv->chan_rx)
1517 priv->use_dma = 1;
1518 }
1519 dev_info(priv->port.dev, "PCH UART: %s\n",
1520 priv->use_dma ?
1521 "Use DMA Mode" : "No DMA");
1522 }
1523
1524 return 0;
1525 }
1526
1527 #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_PCH_UART_CONSOLE)
1528 /*
1529 * Wait for transmitter & holding register to empty
1530 */
1531 static void wait_for_xmitr(struct eg20t_port *up, int bits)
1532 {
1533 unsigned int status, tmout = 10000;
1534
1535 /* Wait up to 10ms for the character(s) to be sent. */
1536 for (;;) {
1537 status = ioread8(up->membase + UART_LSR);
1538
1539 if ((status & bits) == bits)
1540 break;
1541 if (--tmout == 0)
1542 break;
1543 udelay(1);
1544 }
1545
1546 /* Wait up to 1s for flow control if necessary */
1547 if (up->port.flags & UPF_CONS_FLOW) {
1548 unsigned int tmout;
1549 for (tmout = 1000000; tmout; tmout--) {
1550 unsigned int msr = ioread8(up->membase + UART_MSR);
1551 if (msr & UART_MSR_CTS)
1552 break;
1553 udelay(1);
1554 touch_nmi_watchdog();
1555 }
1556 }
1557 }
1558 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_PCH_UART_CONSOLE */
1559
1560 #ifdef CONFIG_CONSOLE_POLL
1561 /*
1562 * Console polling routines for communicate via uart while
1563 * in an interrupt or debug context.
1564 */
1565 static int pch_uart_get_poll_char(struct uart_port *port)
1566 {
1567 struct eg20t_port *priv =
1568 container_of(port, struct eg20t_port, port);
1569 u8 lsr = ioread8(priv->membase + UART_LSR);
1570
1571 if (!(lsr & UART_LSR_DR))
1572 return NO_POLL_CHAR;
1573
1574 return ioread8(priv->membase + PCH_UART_RBR);
1575 }
1576
1577
1578 static void pch_uart_put_poll_char(struct uart_port *port,
1579 unsigned char c)
1580 {
1581 unsigned int ier;
1582 struct eg20t_port *priv =
1583 container_of(port, struct eg20t_port, port);
1584
1585 /*
1586 * First save the IER then disable the interrupts
1587 */
1588 ier = ioread8(priv->membase + UART_IER);
1589 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1590
1591 wait_for_xmitr(priv, UART_LSR_THRE);
1592 /*
1593 * Send the character out.
1594 */
1595 iowrite8(c, priv->membase + PCH_UART_THR);
1596
1597 /*
1598 * Finally, wait for transmitter to become empty
1599 * and restore the IER
1600 */
1601 wait_for_xmitr(priv, BOTH_EMPTY);
1602 iowrite8(ier, priv->membase + UART_IER);
1603 }
1604 #endif /* CONFIG_CONSOLE_POLL */
1605
1606 static struct uart_ops pch_uart_ops = {
1607 .tx_empty = pch_uart_tx_empty,
1608 .set_mctrl = pch_uart_set_mctrl,
1609 .get_mctrl = pch_uart_get_mctrl,
1610 .stop_tx = pch_uart_stop_tx,
1611 .start_tx = pch_uart_start_tx,
1612 .stop_rx = pch_uart_stop_rx,
1613 .enable_ms = pch_uart_enable_ms,
1614 .break_ctl = pch_uart_break_ctl,
1615 .startup = pch_uart_startup,
1616 .shutdown = pch_uart_shutdown,
1617 .set_termios = pch_uart_set_termios,
1618 /* .pm = pch_uart_pm, Not supported yet */
1619 .type = pch_uart_type,
1620 .release_port = pch_uart_release_port,
1621 .request_port = pch_uart_request_port,
1622 .config_port = pch_uart_config_port,
1623 .verify_port = pch_uart_verify_port,
1624 #ifdef CONFIG_CONSOLE_POLL
1625 .poll_get_char = pch_uart_get_poll_char,
1626 .poll_put_char = pch_uart_put_poll_char,
1627 #endif
1628 };
1629
1630 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1631
1632 static void pch_console_putchar(struct uart_port *port, int ch)
1633 {
1634 struct eg20t_port *priv =
1635 container_of(port, struct eg20t_port, port);
1636
1637 wait_for_xmitr(priv, UART_LSR_THRE);
1638 iowrite8(ch, priv->membase + PCH_UART_THR);
1639 }
1640
1641 /*
1642 * Print a string to the serial port trying not to disturb
1643 * any possible real use of the port...
1644 *
1645 * The console_lock must be held when we get here.
1646 */
1647 static void
1648 pch_console_write(struct console *co, const char *s, unsigned int count)
1649 {
1650 struct eg20t_port *priv;
1651 unsigned long flags;
1652 int priv_locked = 1;
1653 int port_locked = 1;
1654 u8 ier;
1655
1656 priv = pch_uart_ports[co->index];
1657
1658 touch_nmi_watchdog();
1659
1660 local_irq_save(flags);
1661 if (priv->port.sysrq) {
1662 /* call to uart_handle_sysrq_char already took the priv lock */
1663 priv_locked = 0;
1664 /* serial8250_handle_port() already took the port lock */
1665 port_locked = 0;
1666 } else if (oops_in_progress) {
1667 priv_locked = spin_trylock(&priv->lock);
1668 port_locked = spin_trylock(&priv->port.lock);
1669 } else {
1670 spin_lock(&priv->lock);
1671 spin_lock(&priv->port.lock);
1672 }
1673
1674 /*
1675 * First save the IER then disable the interrupts
1676 */
1677 ier = ioread8(priv->membase + UART_IER);
1678
1679 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1680
1681 uart_console_write(&priv->port, s, count, pch_console_putchar);
1682
1683 /*
1684 * Finally, wait for transmitter to become empty
1685 * and restore the IER
1686 */
1687 wait_for_xmitr(priv, BOTH_EMPTY);
1688 iowrite8(ier, priv->membase + UART_IER);
1689
1690 if (port_locked)
1691 spin_unlock(&priv->port.lock);
1692 if (priv_locked)
1693 spin_unlock(&priv->lock);
1694 local_irq_restore(flags);
1695 }
1696
1697 static int __init pch_console_setup(struct console *co, char *options)
1698 {
1699 struct uart_port *port;
1700 int baud = default_baud;
1701 int bits = 8;
1702 int parity = 'n';
1703 int flow = 'n';
1704
1705 /*
1706 * Check whether an invalid uart number has been specified, and
1707 * if so, search for the first available port that does have
1708 * console support.
1709 */
1710 if (co->index >= PCH_UART_NR)
1711 co->index = 0;
1712 port = &pch_uart_ports[co->index]->port;
1713
1714 if (!port || (!port->iobase && !port->membase))
1715 return -ENODEV;
1716
1717 port->uartclk = pch_uart_get_uartclk();
1718
1719 if (options)
1720 uart_parse_options(options, &baud, &parity, &bits, &flow);
1721
1722 return uart_set_options(port, co, baud, parity, bits, flow);
1723 }
1724
1725 static struct uart_driver pch_uart_driver;
1726
1727 static struct console pch_console = {
1728 .name = PCH_UART_DRIVER_DEVICE,
1729 .write = pch_console_write,
1730 .device = uart_console_device,
1731 .setup = pch_console_setup,
1732 .flags = CON_PRINTBUFFER | CON_ANYTIME,
1733 .index = -1,
1734 .data = &pch_uart_driver,
1735 };
1736
1737 #define PCH_CONSOLE (&pch_console)
1738 #else
1739 #define PCH_CONSOLE NULL
1740 #endif /* CONFIG_SERIAL_PCH_UART_CONSOLE */
1741
1742 static struct uart_driver pch_uart_driver = {
1743 .owner = THIS_MODULE,
1744 .driver_name = KBUILD_MODNAME,
1745 .dev_name = PCH_UART_DRIVER_DEVICE,
1746 .major = 0,
1747 .minor = 0,
1748 .nr = PCH_UART_NR,
1749 .cons = PCH_CONSOLE,
1750 };
1751
1752 static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
1753 const struct pci_device_id *id)
1754 {
1755 struct eg20t_port *priv;
1756 int ret;
1757 unsigned int iobase;
1758 unsigned int mapbase;
1759 unsigned char *rxbuf;
1760 int fifosize;
1761 int port_type;
1762 struct pch_uart_driver_data *board;
1763 #ifdef CONFIG_DEBUG_FS
1764 char name[32]; /* for debugfs file name */
1765 #endif
1766
1767 board = &drv_dat[id->driver_data];
1768 port_type = board->port_type;
1769
1770 priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
1771 if (priv == NULL)
1772 goto init_port_alloc_err;
1773
1774 rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
1775 if (!rxbuf)
1776 goto init_port_free_txbuf;
1777
1778 switch (port_type) {
1779 case PORT_UNKNOWN:
1780 fifosize = 256; /* EG20T/ML7213: UART0 */
1781 break;
1782 case PORT_8250:
1783 fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/
1784 break;
1785 default:
1786 dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
1787 goto init_port_hal_free;
1788 }
1789
1790 pci_enable_msi(pdev);
1791 pci_set_master(pdev);
1792
1793 spin_lock_init(&priv->lock);
1794
1795 iobase = pci_resource_start(pdev, 0);
1796 mapbase = pci_resource_start(pdev, 1);
1797 priv->mapbase = mapbase;
1798 priv->iobase = iobase;
1799 priv->pdev = pdev;
1800 priv->tx_empty = 1;
1801 priv->rxbuf.buf = rxbuf;
1802 priv->rxbuf.size = PAGE_SIZE;
1803
1804 priv->fifo_size = fifosize;
1805 priv->uartclk = pch_uart_get_uartclk();
1806 priv->port_type = PORT_MAX_8250 + port_type + 1;
1807 priv->port.dev = &pdev->dev;
1808 priv->port.iobase = iobase;
1809 priv->port.membase = NULL;
1810 priv->port.mapbase = mapbase;
1811 priv->port.irq = pdev->irq;
1812 priv->port.iotype = UPIO_PORT;
1813 priv->port.ops = &pch_uart_ops;
1814 priv->port.flags = UPF_BOOT_AUTOCONF;
1815 priv->port.fifosize = fifosize;
1816 priv->port.line = board->line_no;
1817 priv->trigger = PCH_UART_HAL_TRIGGER_M;
1818
1819 snprintf(priv->irq_name, IRQ_NAME_SIZE,
1820 KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
1821 priv->port.line);
1822
1823 spin_lock_init(&priv->port.lock);
1824
1825 pci_set_drvdata(pdev, priv);
1826 priv->trigger_level = 1;
1827 priv->fcr = 0;
1828
1829 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1830 pch_uart_ports[board->line_no] = priv;
1831 #endif
1832 ret = uart_add_one_port(&pch_uart_driver, &priv->port);
1833 if (ret < 0)
1834 goto init_port_hal_free;
1835
1836 #ifdef CONFIG_DEBUG_FS
1837 snprintf(name, sizeof(name), "uart%d_regs", board->line_no);
1838 priv->debugfs = debugfs_create_file(name, S_IFREG | S_IRUGO,
1839 NULL, priv, &port_regs_ops);
1840 #endif
1841
1842 return priv;
1843
1844 init_port_hal_free:
1845 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1846 pch_uart_ports[board->line_no] = NULL;
1847 #endif
1848 free_page((unsigned long)rxbuf);
1849 init_port_free_txbuf:
1850 kfree(priv);
1851 init_port_alloc_err:
1852
1853 return NULL;
1854 }
1855
1856 static void pch_uart_exit_port(struct eg20t_port *priv)
1857 {
1858
1859 #ifdef CONFIG_DEBUG_FS
1860 if (priv->debugfs)
1861 debugfs_remove(priv->debugfs);
1862 #endif
1863 uart_remove_one_port(&pch_uart_driver, &priv->port);
1864 free_page((unsigned long)priv->rxbuf.buf);
1865 }
1866
1867 static void pch_uart_pci_remove(struct pci_dev *pdev)
1868 {
1869 struct eg20t_port *priv = pci_get_drvdata(pdev);
1870
1871 pci_disable_msi(pdev);
1872
1873 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1874 pch_uart_ports[priv->port.line] = NULL;
1875 #endif
1876 pch_uart_exit_port(priv);
1877 pci_disable_device(pdev);
1878 kfree(priv);
1879 return;
1880 }
1881 #ifdef CONFIG_PM
1882 static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state)
1883 {
1884 struct eg20t_port *priv = pci_get_drvdata(pdev);
1885
1886 uart_suspend_port(&pch_uart_driver, &priv->port);
1887
1888 pci_save_state(pdev);
1889 pci_set_power_state(pdev, pci_choose_state(pdev, state));
1890 return 0;
1891 }
1892
1893 static int pch_uart_pci_resume(struct pci_dev *pdev)
1894 {
1895 struct eg20t_port *priv = pci_get_drvdata(pdev);
1896 int ret;
1897
1898 pci_set_power_state(pdev, PCI_D0);
1899 pci_restore_state(pdev);
1900
1901 ret = pci_enable_device(pdev);
1902 if (ret) {
1903 dev_err(&pdev->dev,
1904 "%s-pci_enable_device failed(ret=%d) ", __func__, ret);
1905 return ret;
1906 }
1907
1908 uart_resume_port(&pch_uart_driver, &priv->port);
1909
1910 return 0;
1911 }
1912 #else
1913 #define pch_uart_pci_suspend NULL
1914 #define pch_uart_pci_resume NULL
1915 #endif
1916
1917 static const struct pci_device_id pch_uart_pci_id[] = {
1918 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
1919 .driver_data = pch_et20t_uart0},
1920 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
1921 .driver_data = pch_et20t_uart1},
1922 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
1923 .driver_data = pch_et20t_uart2},
1924 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
1925 .driver_data = pch_et20t_uart3},
1926 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
1927 .driver_data = pch_ml7213_uart0},
1928 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
1929 .driver_data = pch_ml7213_uart1},
1930 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
1931 .driver_data = pch_ml7213_uart2},
1932 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800C),
1933 .driver_data = pch_ml7223_uart0},
1934 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
1935 .driver_data = pch_ml7223_uart1},
1936 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
1937 .driver_data = pch_ml7831_uart0},
1938 {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
1939 .driver_data = pch_ml7831_uart1},
1940 {0,},
1941 };
1942
1943 static int pch_uart_pci_probe(struct pci_dev *pdev,
1944 const struct pci_device_id *id)
1945 {
1946 int ret;
1947 struct eg20t_port *priv;
1948
1949 ret = pci_enable_device(pdev);
1950 if (ret < 0)
1951 goto probe_error;
1952
1953 priv = pch_uart_init_port(pdev, id);
1954 if (!priv) {
1955 ret = -EBUSY;
1956 goto probe_disable_device;
1957 }
1958 pci_set_drvdata(pdev, priv);
1959
1960 return ret;
1961
1962 probe_disable_device:
1963 pci_disable_msi(pdev);
1964 pci_disable_device(pdev);
1965 probe_error:
1966 return ret;
1967 }
1968
1969 static struct pci_driver pch_uart_pci_driver = {
1970 .name = "pch_uart",
1971 .id_table = pch_uart_pci_id,
1972 .probe = pch_uart_pci_probe,
1973 .remove = pch_uart_pci_remove,
1974 .suspend = pch_uart_pci_suspend,
1975 .resume = pch_uart_pci_resume,
1976 };
1977
1978 static int __init pch_uart_module_init(void)
1979 {
1980 int ret;
1981
1982 /* register as UART driver */
1983 ret = uart_register_driver(&pch_uart_driver);
1984 if (ret < 0)
1985 return ret;
1986
1987 /* register as PCI driver */
1988 ret = pci_register_driver(&pch_uart_pci_driver);
1989 if (ret < 0)
1990 uart_unregister_driver(&pch_uart_driver);
1991
1992 return ret;
1993 }
1994 module_init(pch_uart_module_init);
1995
1996 static void __exit pch_uart_module_exit(void)
1997 {
1998 pci_unregister_driver(&pch_uart_pci_driver);
1999 uart_unregister_driver(&pch_uart_driver);
2000 }
2001 module_exit(pch_uart_module_exit);
2002
2003 MODULE_LICENSE("GPL v2");
2004 MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
2005 MODULE_DEVICE_TABLE(pci, pch_uart_pci_id);
2006
2007 module_param(default_baud, uint, S_IRUGO);
2008 MODULE_PARM_DESC(default_baud,
2009 "Default BAUD for initial driver state and console (default 9600)");
2010 module_param(user_uartclk, uint, S_IRUGO);
2011 MODULE_PARM_DESC(user_uartclk,
2012 "Override UART default or board specific UART clock");
Linux with added FPC-III support