2 * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
3 * Copyright (c) 2014- QLogic Corporation.
7 * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License (GPL) Version 2 as
11 * published by the Free Software Foundation
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
24 BFA_TRC_FILE(CNA
, IOC_CB
);
26 #define bfa_ioc_cb_join_pos(__ioc) ((u32) (1 << BFA_IOC_CB_JOIN_SH))
29 * forward declarations
31 static bfa_boolean_t
bfa_ioc_cb_firmware_lock(struct bfa_ioc_s
*ioc
);
32 static void bfa_ioc_cb_firmware_unlock(struct bfa_ioc_s
*ioc
);
33 static void bfa_ioc_cb_reg_init(struct bfa_ioc_s
*ioc
);
34 static void bfa_ioc_cb_map_port(struct bfa_ioc_s
*ioc
);
35 static void bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s
*ioc
, bfa_boolean_t msix
);
36 static void bfa_ioc_cb_notify_fail(struct bfa_ioc_s
*ioc
);
37 static void bfa_ioc_cb_ownership_reset(struct bfa_ioc_s
*ioc
);
38 static bfa_boolean_t
bfa_ioc_cb_sync_start(struct bfa_ioc_s
*ioc
);
39 static void bfa_ioc_cb_sync_join(struct bfa_ioc_s
*ioc
);
40 static void bfa_ioc_cb_sync_leave(struct bfa_ioc_s
*ioc
);
41 static void bfa_ioc_cb_sync_ack(struct bfa_ioc_s
*ioc
);
42 static bfa_boolean_t
bfa_ioc_cb_sync_complete(struct bfa_ioc_s
*ioc
);
43 static void bfa_ioc_cb_set_cur_ioc_fwstate(
44 struct bfa_ioc_s
*ioc
, enum bfi_ioc_state fwstate
);
45 static enum bfi_ioc_state
bfa_ioc_cb_get_cur_ioc_fwstate(struct bfa_ioc_s
*ioc
);
46 static void bfa_ioc_cb_set_alt_ioc_fwstate(
47 struct bfa_ioc_s
*ioc
, enum bfi_ioc_state fwstate
);
48 static enum bfi_ioc_state
bfa_ioc_cb_get_alt_ioc_fwstate(struct bfa_ioc_s
*ioc
);
50 static struct bfa_ioc_hwif_s hwif_cb
;
53 * Called from bfa_ioc_attach() to map asic specific calls.
56 bfa_ioc_set_cb_hwif(struct bfa_ioc_s
*ioc
)
58 hwif_cb
.ioc_pll_init
= bfa_ioc_cb_pll_init
;
59 hwif_cb
.ioc_firmware_lock
= bfa_ioc_cb_firmware_lock
;
60 hwif_cb
.ioc_firmware_unlock
= bfa_ioc_cb_firmware_unlock
;
61 hwif_cb
.ioc_reg_init
= bfa_ioc_cb_reg_init
;
62 hwif_cb
.ioc_map_port
= bfa_ioc_cb_map_port
;
63 hwif_cb
.ioc_isr_mode_set
= bfa_ioc_cb_isr_mode_set
;
64 hwif_cb
.ioc_notify_fail
= bfa_ioc_cb_notify_fail
;
65 hwif_cb
.ioc_ownership_reset
= bfa_ioc_cb_ownership_reset
;
66 hwif_cb
.ioc_sync_start
= bfa_ioc_cb_sync_start
;
67 hwif_cb
.ioc_sync_join
= bfa_ioc_cb_sync_join
;
68 hwif_cb
.ioc_sync_leave
= bfa_ioc_cb_sync_leave
;
69 hwif_cb
.ioc_sync_ack
= bfa_ioc_cb_sync_ack
;
70 hwif_cb
.ioc_sync_complete
= bfa_ioc_cb_sync_complete
;
71 hwif_cb
.ioc_set_fwstate
= bfa_ioc_cb_set_cur_ioc_fwstate
;
72 hwif_cb
.ioc_get_fwstate
= bfa_ioc_cb_get_cur_ioc_fwstate
;
73 hwif_cb
.ioc_set_alt_fwstate
= bfa_ioc_cb_set_alt_ioc_fwstate
;
74 hwif_cb
.ioc_get_alt_fwstate
= bfa_ioc_cb_get_alt_ioc_fwstate
;
76 ioc
->ioc_hwif
= &hwif_cb
;
80 * Return true if firmware of current driver matches the running firmware.
83 bfa_ioc_cb_firmware_lock(struct bfa_ioc_s
*ioc
)
85 enum bfi_ioc_state alt_fwstate
, cur_fwstate
;
86 struct bfi_ioc_image_hdr_s fwhdr
;
88 cur_fwstate
= bfa_ioc_cb_get_cur_ioc_fwstate(ioc
);
89 bfa_trc(ioc
, cur_fwstate
);
90 alt_fwstate
= bfa_ioc_cb_get_alt_ioc_fwstate(ioc
);
91 bfa_trc(ioc
, alt_fwstate
);
94 * Uninit implies this is the only driver as of now.
96 if (cur_fwstate
== BFI_IOC_UNINIT
)
99 * Check if another driver with a different firmware is active
101 bfa_ioc_fwver_get(ioc
, &fwhdr
);
102 if (!bfa_ioc_fwver_cmp(ioc
, &fwhdr
) &&
103 alt_fwstate
!= BFI_IOC_DISABLED
) {
104 bfa_trc(ioc
, alt_fwstate
);
112 bfa_ioc_cb_firmware_unlock(struct bfa_ioc_s
*ioc
)
117 * Notify other functions on HB failure.
120 bfa_ioc_cb_notify_fail(struct bfa_ioc_s
*ioc
)
122 writel(~0U, ioc
->ioc_regs
.err_set
);
123 readl(ioc
->ioc_regs
.err_set
);
127 * Host to LPU mailbox message addresses
129 static struct { u32 hfn_mbox
, lpu_mbox
, hfn_pgn
; } iocreg_fnreg
[] = {
130 { HOSTFN0_LPU_MBOX0_0
, LPU_HOSTFN0_MBOX0_0
, HOST_PAGE_NUM_FN0
},
131 { HOSTFN1_LPU_MBOX0_8
, LPU_HOSTFN1_MBOX0_8
, HOST_PAGE_NUM_FN1
}
135 * Host <-> LPU mailbox command/status registers
137 static struct { u32 hfn
, lpu
; } iocreg_mbcmd
[] = {
139 { HOSTFN0_LPU0_CMD_STAT
, LPU0_HOSTFN0_CMD_STAT
},
140 { HOSTFN1_LPU1_CMD_STAT
, LPU1_HOSTFN1_CMD_STAT
}
144 bfa_ioc_cb_reg_init(struct bfa_ioc_s
*ioc
)
147 int pcifn
= bfa_ioc_pcifn(ioc
);
149 rb
= bfa_ioc_bar0(ioc
);
151 ioc
->ioc_regs
.hfn_mbox
= rb
+ iocreg_fnreg
[pcifn
].hfn_mbox
;
152 ioc
->ioc_regs
.lpu_mbox
= rb
+ iocreg_fnreg
[pcifn
].lpu_mbox
;
153 ioc
->ioc_regs
.host_page_num_fn
= rb
+ iocreg_fnreg
[pcifn
].hfn_pgn
;
155 if (ioc
->port_id
== 0) {
156 ioc
->ioc_regs
.heartbeat
= rb
+ BFA_IOC0_HBEAT_REG
;
157 ioc
->ioc_regs
.ioc_fwstate
= rb
+ BFA_IOC0_STATE_REG
;
158 ioc
->ioc_regs
.alt_ioc_fwstate
= rb
+ BFA_IOC1_STATE_REG
;
160 ioc
->ioc_regs
.heartbeat
= (rb
+ BFA_IOC1_HBEAT_REG
);
161 ioc
->ioc_regs
.ioc_fwstate
= (rb
+ BFA_IOC1_STATE_REG
);
162 ioc
->ioc_regs
.alt_ioc_fwstate
= (rb
+ BFA_IOC0_STATE_REG
);
166 * Host <-> LPU mailbox command/status registers
168 ioc
->ioc_regs
.hfn_mbox_cmd
= rb
+ iocreg_mbcmd
[pcifn
].hfn
;
169 ioc
->ioc_regs
.lpu_mbox_cmd
= rb
+ iocreg_mbcmd
[pcifn
].lpu
;
172 * PSS control registers
174 ioc
->ioc_regs
.pss_ctl_reg
= (rb
+ PSS_CTL_REG
);
175 ioc
->ioc_regs
.pss_err_status_reg
= (rb
+ PSS_ERR_STATUS_REG
);
176 ioc
->ioc_regs
.app_pll_fast_ctl_reg
= (rb
+ APP_PLL_LCLK_CTL_REG
);
177 ioc
->ioc_regs
.app_pll_slow_ctl_reg
= (rb
+ APP_PLL_SCLK_CTL_REG
);
180 * IOC semaphore registers and serialization
182 ioc
->ioc_regs
.ioc_sem_reg
= (rb
+ HOST_SEM0_REG
);
183 ioc
->ioc_regs
.ioc_init_sem_reg
= (rb
+ HOST_SEM2_REG
);
188 ioc
->ioc_regs
.smem_page_start
= (rb
+ PSS_SMEM_PAGE_START
);
189 ioc
->ioc_regs
.smem_pg0
= BFI_IOC_SMEM_PG0_CB
;
192 * err set reg : for notification of hb failure
194 ioc
->ioc_regs
.err_set
= (rb
+ ERR_SET_REG
);
198 * Initialize IOC to port mapping.
202 bfa_ioc_cb_map_port(struct bfa_ioc_s
*ioc
)
205 * For crossbow, port id is same as pci function.
207 ioc
->port_id
= bfa_ioc_pcifn(ioc
);
209 bfa_trc(ioc
, ioc
->port_id
);
213 * Set interrupt mode for a function: INTX or MSIX
216 bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s
*ioc
, bfa_boolean_t msix
)
221 * Synchronized IOC failure processing routines
224 bfa_ioc_cb_sync_start(struct bfa_ioc_s
*ioc
)
226 u32 ioc_fwstate
= readl(ioc
->ioc_regs
.ioc_fwstate
);
229 * Driver load time. If the join bit is set,
230 * it is due to an unclean exit by the driver for this
231 * PCI fn in the previous incarnation. Whoever comes here first
232 * should clean it up, no matter which PCI fn.
234 if (ioc_fwstate
& BFA_IOC_CB_JOIN_MASK
) {
235 writel(BFI_IOC_UNINIT
, ioc
->ioc_regs
.ioc_fwstate
);
236 writel(BFI_IOC_UNINIT
, ioc
->ioc_regs
.alt_ioc_fwstate
);
240 return bfa_ioc_cb_sync_complete(ioc
);
244 * Cleanup hw semaphore and usecnt registers
247 bfa_ioc_cb_ownership_reset(struct bfa_ioc_s
*ioc
)
251 * Read the hw sem reg to make sure that it is locked
252 * before we clear it. If it is not locked, writing 1
253 * will lock it instead of clearing it.
255 readl(ioc
->ioc_regs
.ioc_sem_reg
);
256 writel(1, ioc
->ioc_regs
.ioc_sem_reg
);
260 * Synchronized IOC failure processing routines
263 bfa_ioc_cb_sync_join(struct bfa_ioc_s
*ioc
)
265 u32 r32
= readl(ioc
->ioc_regs
.ioc_fwstate
);
266 u32 join_pos
= bfa_ioc_cb_join_pos(ioc
);
268 writel((r32
| join_pos
), ioc
->ioc_regs
.ioc_fwstate
);
272 bfa_ioc_cb_sync_leave(struct bfa_ioc_s
*ioc
)
274 u32 r32
= readl(ioc
->ioc_regs
.ioc_fwstate
);
275 u32 join_pos
= bfa_ioc_cb_join_pos(ioc
);
277 writel((r32
& ~join_pos
), ioc
->ioc_regs
.ioc_fwstate
);
281 bfa_ioc_cb_set_cur_ioc_fwstate(struct bfa_ioc_s
*ioc
,
282 enum bfi_ioc_state fwstate
)
284 u32 r32
= readl(ioc
->ioc_regs
.ioc_fwstate
);
286 writel((fwstate
| (r32
& BFA_IOC_CB_JOIN_MASK
)),
287 ioc
->ioc_regs
.ioc_fwstate
);
290 static enum bfi_ioc_state
291 bfa_ioc_cb_get_cur_ioc_fwstate(struct bfa_ioc_s
*ioc
)
293 return (enum bfi_ioc_state
)(readl(ioc
->ioc_regs
.ioc_fwstate
) &
294 BFA_IOC_CB_FWSTATE_MASK
);
298 bfa_ioc_cb_set_alt_ioc_fwstate(struct bfa_ioc_s
*ioc
,
299 enum bfi_ioc_state fwstate
)
301 u32 r32
= readl(ioc
->ioc_regs
.alt_ioc_fwstate
);
303 writel((fwstate
| (r32
& BFA_IOC_CB_JOIN_MASK
)),
304 ioc
->ioc_regs
.alt_ioc_fwstate
);
307 static enum bfi_ioc_state
308 bfa_ioc_cb_get_alt_ioc_fwstate(struct bfa_ioc_s
*ioc
)
310 return (enum bfi_ioc_state
)(readl(ioc
->ioc_regs
.alt_ioc_fwstate
) &
311 BFA_IOC_CB_FWSTATE_MASK
);
315 bfa_ioc_cb_sync_ack(struct bfa_ioc_s
*ioc
)
317 bfa_ioc_cb_set_cur_ioc_fwstate(ioc
, BFI_IOC_FAIL
);
321 bfa_ioc_cb_sync_complete(struct bfa_ioc_s
*ioc
)
323 u32 fwstate
, alt_fwstate
;
324 fwstate
= bfa_ioc_cb_get_cur_ioc_fwstate(ioc
);
327 * At this point, this IOC is hoding the hw sem in the
328 * start path (fwcheck) OR in the disable/enable path
329 * OR to check if the other IOC has acknowledged failure.
331 * So, this IOC can be in UNINIT, INITING, DISABLED, FAIL
332 * or in MEMTEST states. In a normal scenario, this IOC
333 * can not be in OP state when this function is called.
335 * However, this IOC could still be in OP state when
336 * the OS driver is starting up, if the OptROM code has
337 * left it in that state.
339 * If we had marked this IOC's fwstate as BFI_IOC_FAIL
340 * in the failure case and now, if the fwstate is not
341 * BFI_IOC_FAIL it implies that the other PCI fn have
342 * reinitialized the ASIC or this IOC got disabled, so
345 if (fwstate
== BFI_IOC_UNINIT
||
346 fwstate
== BFI_IOC_INITING
||
347 fwstate
== BFI_IOC_DISABLED
||
348 fwstate
== BFI_IOC_MEMTEST
||
349 fwstate
== BFI_IOC_OP
)
352 alt_fwstate
= bfa_ioc_cb_get_alt_ioc_fwstate(ioc
);
353 if (alt_fwstate
== BFI_IOC_FAIL
||
354 alt_fwstate
== BFI_IOC_DISABLED
||
355 alt_fwstate
== BFI_IOC_UNINIT
||
356 alt_fwstate
== BFI_IOC_INITING
||
357 alt_fwstate
== BFI_IOC_MEMTEST
)
365 bfa_ioc_cb_pll_init(void __iomem
*rb
, enum bfi_asic_mode fcmode
)
367 u32 pll_sclk
, pll_fclk
, join_bits
;
369 pll_sclk
= __APP_PLL_SCLK_ENABLE
| __APP_PLL_SCLK_LRESETN
|
370 __APP_PLL_SCLK_P0_1(3U) |
371 __APP_PLL_SCLK_JITLMT0_1(3U) |
372 __APP_PLL_SCLK_CNTLMT0_1(3U);
373 pll_fclk
= __APP_PLL_LCLK_ENABLE
| __APP_PLL_LCLK_LRESETN
|
374 __APP_PLL_LCLK_RSEL200500
| __APP_PLL_LCLK_P0_1(3U) |
375 __APP_PLL_LCLK_JITLMT0_1(3U) |
376 __APP_PLL_LCLK_CNTLMT0_1(3U);
377 join_bits
= readl(rb
+ BFA_IOC0_STATE_REG
) &
378 BFA_IOC_CB_JOIN_MASK
;
379 writel((BFI_IOC_UNINIT
| join_bits
), (rb
+ BFA_IOC0_STATE_REG
));
380 join_bits
= readl(rb
+ BFA_IOC1_STATE_REG
) &
381 BFA_IOC_CB_JOIN_MASK
;
382 writel((BFI_IOC_UNINIT
| join_bits
), (rb
+ BFA_IOC1_STATE_REG
));
383 writel(0xffffffffU
, (rb
+ HOSTFN0_INT_MSK
));
384 writel(0xffffffffU
, (rb
+ HOSTFN1_INT_MSK
));
385 writel(0xffffffffU
, (rb
+ HOSTFN0_INT_STATUS
));
386 writel(0xffffffffU
, (rb
+ HOSTFN1_INT_STATUS
));
387 writel(0xffffffffU
, (rb
+ HOSTFN0_INT_MSK
));
388 writel(0xffffffffU
, (rb
+ HOSTFN1_INT_MSK
));
389 writel(__APP_PLL_SCLK_LOGIC_SOFT_RESET
, rb
+ APP_PLL_SCLK_CTL_REG
);
390 writel(__APP_PLL_SCLK_BYPASS
| __APP_PLL_SCLK_LOGIC_SOFT_RESET
,
391 rb
+ APP_PLL_SCLK_CTL_REG
);
392 writel(__APP_PLL_LCLK_LOGIC_SOFT_RESET
, rb
+ APP_PLL_LCLK_CTL_REG
);
393 writel(__APP_PLL_LCLK_BYPASS
| __APP_PLL_LCLK_LOGIC_SOFT_RESET
,
394 rb
+ APP_PLL_LCLK_CTL_REG
);
396 writel(__APP_PLL_SCLK_LOGIC_SOFT_RESET
, rb
+ APP_PLL_SCLK_CTL_REG
);
397 writel(__APP_PLL_LCLK_LOGIC_SOFT_RESET
, rb
+ APP_PLL_LCLK_CTL_REG
);
398 writel(pll_sclk
| __APP_PLL_SCLK_LOGIC_SOFT_RESET
,
399 rb
+ APP_PLL_SCLK_CTL_REG
);
400 writel(pll_fclk
| __APP_PLL_LCLK_LOGIC_SOFT_RESET
,
401 rb
+ APP_PLL_LCLK_CTL_REG
);
403 writel(0xffffffffU
, (rb
+ HOSTFN0_INT_STATUS
));
404 writel(0xffffffffU
, (rb
+ HOSTFN1_INT_STATUS
));
405 writel(pll_sclk
, (rb
+ APP_PLL_SCLK_CTL_REG
));
406 writel(pll_fclk
, (rb
+ APP_PLL_LCLK_CTL_REG
));
408 return BFA_STATUS_OK
;