ipv6: fix route error binding peer in func icmp6_dst_alloc
[linux/fpc-iii.git] / drivers / md / dm-log-userspace-base.c
blob1021c89860116a5bb6e3a2faea1362c0ea805f52
1 /*
2 * Copyright (C) 2006-2009 Red Hat, Inc.
4 * This file is released under the LGPL.
5 */
7 #include <linux/bio.h>
8 #include <linux/slab.h>
9 #include <linux/dm-dirty-log.h>
10 #include <linux/device-mapper.h>
11 #include <linux/dm-log-userspace.h>
13 #include "dm-log-userspace-transfer.h"
15 #define DM_LOG_USERSPACE_VSN "1.1.0"
17 struct flush_entry {
18 int type;
19 region_t region;
20 struct list_head list;
24 * This limit on the number of mark and clear request is, to a degree,
25 * arbitrary. However, there is some basis for the choice in the limits
26 * imposed on the size of data payload by dm-log-userspace-transfer.c:
27 * dm_consult_userspace().
29 #define MAX_FLUSH_GROUP_COUNT 32
31 struct log_c {
32 struct dm_target *ti;
33 uint32_t region_size;
34 region_t region_count;
35 uint64_t luid;
36 char uuid[DM_UUID_LEN];
38 char *usr_argv_str;
39 uint32_t usr_argc;
42 * in_sync_hint gets set when doing is_remote_recovering. It
43 * represents the first region that needs recovery. IOW, the
44 * first zero bit of sync_bits. This can be useful for to limit
45 * traffic for calls like is_remote_recovering and get_resync_work,
46 * but be take care in its use for anything else.
48 uint64_t in_sync_hint;
51 * Mark and clear requests are held until a flush is issued
52 * so that we can group, and thereby limit, the amount of
53 * network traffic between kernel and userspace. The 'flush_lock'
54 * is used to protect these lists.
56 spinlock_t flush_lock;
57 struct list_head mark_list;
58 struct list_head clear_list;
61 static mempool_t *flush_entry_pool;
63 static void *flush_entry_alloc(gfp_t gfp_mask, void *pool_data)
65 return kmalloc(sizeof(struct flush_entry), gfp_mask);
68 static void flush_entry_free(void *element, void *pool_data)
70 kfree(element);
73 static int userspace_do_request(struct log_c *lc, const char *uuid,
74 int request_type, char *data, size_t data_size,
75 char *rdata, size_t *rdata_size)
77 int r;
80 * If the server isn't there, -ESRCH is returned,
81 * and we must keep trying until the server is
82 * restored.
84 retry:
85 r = dm_consult_userspace(uuid, lc->luid, request_type, data,
86 data_size, rdata, rdata_size);
88 if (r != -ESRCH)
89 return r;
91 DMERR(" Userspace log server not found.");
92 while (1) {
93 set_current_state(TASK_INTERRUPTIBLE);
94 schedule_timeout(2*HZ);
95 DMWARN("Attempting to contact userspace log server...");
96 r = dm_consult_userspace(uuid, lc->luid, DM_ULOG_CTR,
97 lc->usr_argv_str,
98 strlen(lc->usr_argv_str) + 1,
99 NULL, NULL);
100 if (!r)
101 break;
103 DMINFO("Reconnected to userspace log server... DM_ULOG_CTR complete");
104 r = dm_consult_userspace(uuid, lc->luid, DM_ULOG_RESUME, NULL,
105 0, NULL, NULL);
106 if (!r)
107 goto retry;
109 DMERR("Error trying to resume userspace log: %d", r);
111 return -ESRCH;
114 static int build_constructor_string(struct dm_target *ti,
115 unsigned argc, char **argv,
116 char **ctr_str)
118 int i, str_size;
119 char *str = NULL;
121 *ctr_str = NULL;
123 for (i = 0, str_size = 0; i < argc; i++)
124 str_size += strlen(argv[i]) + 1; /* +1 for space between args */
126 str_size += 20; /* Max number of chars in a printed u64 number */
128 str = kzalloc(str_size, GFP_KERNEL);
129 if (!str) {
130 DMWARN("Unable to allocate memory for constructor string");
131 return -ENOMEM;
134 str_size = sprintf(str, "%llu", (unsigned long long)ti->len);
135 for (i = 0; i < argc; i++)
136 str_size += sprintf(str + str_size, " %s", argv[i]);
138 *ctr_str = str;
139 return str_size;
143 * userspace_ctr
145 * argv contains:
146 * <UUID> <other args>
147 * Where 'other args' is the userspace implementation specific log
148 * arguments. An example might be:
149 * <UUID> clustered_disk <arg count> <log dev> <region_size> [[no]sync]
151 * So, this module will strip off the <UUID> for identification purposes
152 * when communicating with userspace about a log; but will pass on everything
153 * else.
155 static int userspace_ctr(struct dm_dirty_log *log, struct dm_target *ti,
156 unsigned argc, char **argv)
158 int r = 0;
159 int str_size;
160 char *ctr_str = NULL;
161 struct log_c *lc = NULL;
162 uint64_t rdata;
163 size_t rdata_size = sizeof(rdata);
165 if (argc < 3) {
166 DMWARN("Too few arguments to userspace dirty log");
167 return -EINVAL;
170 lc = kmalloc(sizeof(*lc), GFP_KERNEL);
171 if (!lc) {
172 DMWARN("Unable to allocate userspace log context.");
173 return -ENOMEM;
176 /* The ptr value is sufficient for local unique id */
177 lc->luid = (unsigned long)lc;
179 lc->ti = ti;
181 if (strlen(argv[0]) > (DM_UUID_LEN - 1)) {
182 DMWARN("UUID argument too long.");
183 kfree(lc);
184 return -EINVAL;
187 strncpy(lc->uuid, argv[0], DM_UUID_LEN);
188 spin_lock_init(&lc->flush_lock);
189 INIT_LIST_HEAD(&lc->mark_list);
190 INIT_LIST_HEAD(&lc->clear_list);
192 str_size = build_constructor_string(ti, argc - 1, argv + 1, &ctr_str);
193 if (str_size < 0) {
194 kfree(lc);
195 return str_size;
198 /* Send table string */
199 r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_CTR,
200 ctr_str, str_size, NULL, NULL);
202 if (r < 0) {
203 if (r == -ESRCH)
204 DMERR("Userspace log server not found");
205 else
206 DMERR("Userspace log server failed to create log");
207 goto out;
210 /* Since the region size does not change, get it now */
211 rdata_size = sizeof(rdata);
212 r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_GET_REGION_SIZE,
213 NULL, 0, (char *)&rdata, &rdata_size);
215 if (r) {
216 DMERR("Failed to get region size of dirty log");
217 goto out;
220 lc->region_size = (uint32_t)rdata;
221 lc->region_count = dm_sector_div_up(ti->len, lc->region_size);
223 out:
224 if (r) {
225 kfree(lc);
226 kfree(ctr_str);
227 } else {
228 lc->usr_argv_str = ctr_str;
229 lc->usr_argc = argc;
230 log->context = lc;
233 return r;
236 static void userspace_dtr(struct dm_dirty_log *log)
238 struct log_c *lc = log->context;
240 (void) dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_DTR,
241 NULL, 0,
242 NULL, NULL);
244 kfree(lc->usr_argv_str);
245 kfree(lc);
247 return;
250 static int userspace_presuspend(struct dm_dirty_log *log)
252 int r;
253 struct log_c *lc = log->context;
255 r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_PRESUSPEND,
256 NULL, 0,
257 NULL, NULL);
259 return r;
262 static int userspace_postsuspend(struct dm_dirty_log *log)
264 int r;
265 struct log_c *lc = log->context;
267 r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_POSTSUSPEND,
268 NULL, 0,
269 NULL, NULL);
271 return r;
274 static int userspace_resume(struct dm_dirty_log *log)
276 int r;
277 struct log_c *lc = log->context;
279 lc->in_sync_hint = 0;
280 r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_RESUME,
281 NULL, 0,
282 NULL, NULL);
284 return r;
287 static uint32_t userspace_get_region_size(struct dm_dirty_log *log)
289 struct log_c *lc = log->context;
291 return lc->region_size;
295 * userspace_is_clean
297 * Check whether a region is clean. If there is any sort of
298 * failure when consulting the server, we return not clean.
300 * Returns: 1 if clean, 0 otherwise
302 static int userspace_is_clean(struct dm_dirty_log *log, region_t region)
304 int r;
305 uint64_t region64 = (uint64_t)region;
306 int64_t is_clean;
307 size_t rdata_size;
308 struct log_c *lc = log->context;
310 rdata_size = sizeof(is_clean);
311 r = userspace_do_request(lc, lc->uuid, DM_ULOG_IS_CLEAN,
312 (char *)&region64, sizeof(region64),
313 (char *)&is_clean, &rdata_size);
315 return (r) ? 0 : (int)is_clean;
319 * userspace_in_sync
321 * Check if the region is in-sync. If there is any sort
322 * of failure when consulting the server, we assume that
323 * the region is not in sync.
325 * If 'can_block' is set, return immediately
327 * Returns: 1 if in-sync, 0 if not-in-sync, -EWOULDBLOCK
329 static int userspace_in_sync(struct dm_dirty_log *log, region_t region,
330 int can_block)
332 int r;
333 uint64_t region64 = region;
334 int64_t in_sync;
335 size_t rdata_size;
336 struct log_c *lc = log->context;
339 * We can never respond directly - even if in_sync_hint is
340 * set. This is because another machine could see a device
341 * failure and mark the region out-of-sync. If we don't go
342 * to userspace to ask, we might think the region is in-sync
343 * and allow a read to pick up data that is stale. (This is
344 * very unlikely if a device actually fails; but it is very
345 * likely if a connection to one device from one machine fails.)
347 * There still might be a problem if the mirror caches the region
348 * state as in-sync... but then this call would not be made. So,
349 * that is a mirror problem.
351 if (!can_block)
352 return -EWOULDBLOCK;
354 rdata_size = sizeof(in_sync);
355 r = userspace_do_request(lc, lc->uuid, DM_ULOG_IN_SYNC,
356 (char *)&region64, sizeof(region64),
357 (char *)&in_sync, &rdata_size);
358 return (r) ? 0 : (int)in_sync;
361 static int flush_one_by_one(struct log_c *lc, struct list_head *flush_list)
363 int r = 0;
364 struct flush_entry *fe;
366 list_for_each_entry(fe, flush_list, list) {
367 r = userspace_do_request(lc, lc->uuid, fe->type,
368 (char *)&fe->region,
369 sizeof(fe->region),
370 NULL, NULL);
371 if (r)
372 break;
375 return r;
378 static int flush_by_group(struct log_c *lc, struct list_head *flush_list)
380 int r = 0;
381 int count;
382 uint32_t type = 0;
383 struct flush_entry *fe, *tmp_fe;
384 LIST_HEAD(tmp_list);
385 uint64_t group[MAX_FLUSH_GROUP_COUNT];
388 * Group process the requests
390 while (!list_empty(flush_list)) {
391 count = 0;
393 list_for_each_entry_safe(fe, tmp_fe, flush_list, list) {
394 group[count] = fe->region;
395 count++;
397 list_move(&fe->list, &tmp_list);
399 type = fe->type;
400 if (count >= MAX_FLUSH_GROUP_COUNT)
401 break;
404 r = userspace_do_request(lc, lc->uuid, type,
405 (char *)(group),
406 count * sizeof(uint64_t),
407 NULL, NULL);
408 if (r) {
409 /* Group send failed. Attempt one-by-one. */
410 list_splice_init(&tmp_list, flush_list);
411 r = flush_one_by_one(lc, flush_list);
412 break;
417 * Must collect flush_entrys that were successfully processed
418 * as a group so that they will be free'd by the caller.
420 list_splice_init(&tmp_list, flush_list);
422 return r;
426 * userspace_flush
428 * This function is ok to block.
429 * The flush happens in two stages. First, it sends all
430 * clear/mark requests that are on the list. Then it
431 * tells the server to commit them. This gives the
432 * server a chance to optimise the commit, instead of
433 * doing it for every request.
435 * Additionally, we could implement another thread that
436 * sends the requests up to the server - reducing the
437 * load on flush. Then the flush would have less in
438 * the list and be responsible for the finishing commit.
440 * Returns: 0 on success, < 0 on failure
442 static int userspace_flush(struct dm_dirty_log *log)
444 int r = 0;
445 unsigned long flags;
446 struct log_c *lc = log->context;
447 LIST_HEAD(mark_list);
448 LIST_HEAD(clear_list);
449 struct flush_entry *fe, *tmp_fe;
451 spin_lock_irqsave(&lc->flush_lock, flags);
452 list_splice_init(&lc->mark_list, &mark_list);
453 list_splice_init(&lc->clear_list, &clear_list);
454 spin_unlock_irqrestore(&lc->flush_lock, flags);
456 if (list_empty(&mark_list) && list_empty(&clear_list))
457 return 0;
459 r = flush_by_group(lc, &mark_list);
460 if (r)
461 goto fail;
463 r = flush_by_group(lc, &clear_list);
464 if (r)
465 goto fail;
467 r = userspace_do_request(lc, lc->uuid, DM_ULOG_FLUSH,
468 NULL, 0, NULL, NULL);
470 fail:
472 * We can safely remove these entries, even if failure.
473 * Calling code will receive an error and will know that
474 * the log facility has failed.
476 list_for_each_entry_safe(fe, tmp_fe, &mark_list, list) {
477 list_del(&fe->list);
478 mempool_free(fe, flush_entry_pool);
480 list_for_each_entry_safe(fe, tmp_fe, &clear_list, list) {
481 list_del(&fe->list);
482 mempool_free(fe, flush_entry_pool);
485 if (r)
486 dm_table_event(lc->ti->table);
488 return r;
492 * userspace_mark_region
494 * This function should avoid blocking unless absolutely required.
495 * (Memory allocation is valid for blocking.)
497 static void userspace_mark_region(struct dm_dirty_log *log, region_t region)
499 unsigned long flags;
500 struct log_c *lc = log->context;
501 struct flush_entry *fe;
503 /* Wait for an allocation, but _never_ fail */
504 fe = mempool_alloc(flush_entry_pool, GFP_NOIO);
505 BUG_ON(!fe);
507 spin_lock_irqsave(&lc->flush_lock, flags);
508 fe->type = DM_ULOG_MARK_REGION;
509 fe->region = region;
510 list_add(&fe->list, &lc->mark_list);
511 spin_unlock_irqrestore(&lc->flush_lock, flags);
513 return;
517 * userspace_clear_region
519 * This function must not block.
520 * So, the alloc can't block. In the worst case, it is ok to
521 * fail. It would simply mean we can't clear the region.
522 * Does nothing to current sync context, but does mean
523 * the region will be re-sync'ed on a reload of the mirror
524 * even though it is in-sync.
526 static void userspace_clear_region(struct dm_dirty_log *log, region_t region)
528 unsigned long flags;
529 struct log_c *lc = log->context;
530 struct flush_entry *fe;
533 * If we fail to allocate, we skip the clearing of
534 * the region. This doesn't hurt us in any way, except
535 * to cause the region to be resync'ed when the
536 * device is activated next time.
538 fe = mempool_alloc(flush_entry_pool, GFP_ATOMIC);
539 if (!fe) {
540 DMERR("Failed to allocate memory to clear region.");
541 return;
544 spin_lock_irqsave(&lc->flush_lock, flags);
545 fe->type = DM_ULOG_CLEAR_REGION;
546 fe->region = region;
547 list_add(&fe->list, &lc->clear_list);
548 spin_unlock_irqrestore(&lc->flush_lock, flags);
550 return;
554 * userspace_get_resync_work
556 * Get a region that needs recovery. It is valid to return
557 * an error for this function.
559 * Returns: 1 if region filled, 0 if no work, <0 on error
561 static int userspace_get_resync_work(struct dm_dirty_log *log, region_t *region)
563 int r;
564 size_t rdata_size;
565 struct log_c *lc = log->context;
566 struct {
567 int64_t i; /* 64-bit for mix arch compatibility */
568 region_t r;
569 } pkg;
571 if (lc->in_sync_hint >= lc->region_count)
572 return 0;
574 rdata_size = sizeof(pkg);
575 r = userspace_do_request(lc, lc->uuid, DM_ULOG_GET_RESYNC_WORK,
576 NULL, 0,
577 (char *)&pkg, &rdata_size);
579 *region = pkg.r;
580 return (r) ? r : (int)pkg.i;
584 * userspace_set_region_sync
586 * Set the sync status of a given region. This function
587 * must not fail.
589 static void userspace_set_region_sync(struct dm_dirty_log *log,
590 region_t region, int in_sync)
592 int r;
593 struct log_c *lc = log->context;
594 struct {
595 region_t r;
596 int64_t i;
597 } pkg;
599 pkg.r = region;
600 pkg.i = (int64_t)in_sync;
602 r = userspace_do_request(lc, lc->uuid, DM_ULOG_SET_REGION_SYNC,
603 (char *)&pkg, sizeof(pkg),
604 NULL, NULL);
607 * It would be nice to be able to report failures.
608 * However, it is easy emough to detect and resolve.
610 return;
614 * userspace_get_sync_count
616 * If there is any sort of failure when consulting the server,
617 * we assume that the sync count is zero.
619 * Returns: sync count on success, 0 on failure
621 static region_t userspace_get_sync_count(struct dm_dirty_log *log)
623 int r;
624 size_t rdata_size;
625 uint64_t sync_count;
626 struct log_c *lc = log->context;
628 rdata_size = sizeof(sync_count);
629 r = userspace_do_request(lc, lc->uuid, DM_ULOG_GET_SYNC_COUNT,
630 NULL, 0,
631 (char *)&sync_count, &rdata_size);
633 if (r)
634 return 0;
636 if (sync_count >= lc->region_count)
637 lc->in_sync_hint = lc->region_count;
639 return (region_t)sync_count;
643 * userspace_status
645 * Returns: amount of space consumed
647 static int userspace_status(struct dm_dirty_log *log, status_type_t status_type,
648 char *result, unsigned maxlen)
650 int r = 0;
651 char *table_args;
652 size_t sz = (size_t)maxlen;
653 struct log_c *lc = log->context;
655 switch (status_type) {
656 case STATUSTYPE_INFO:
657 r = userspace_do_request(lc, lc->uuid, DM_ULOG_STATUS_INFO,
658 NULL, 0,
659 result, &sz);
661 if (r) {
662 sz = 0;
663 DMEMIT("%s 1 COM_FAILURE", log->type->name);
665 break;
666 case STATUSTYPE_TABLE:
667 sz = 0;
668 table_args = strchr(lc->usr_argv_str, ' ');
669 BUG_ON(!table_args); /* There will always be a ' ' */
670 table_args++;
672 DMEMIT("%s %u %s %s ", log->type->name, lc->usr_argc,
673 lc->uuid, table_args);
674 break;
676 return (r) ? 0 : (int)sz;
680 * userspace_is_remote_recovering
682 * Returns: 1 if region recovering, 0 otherwise
684 static int userspace_is_remote_recovering(struct dm_dirty_log *log,
685 region_t region)
687 int r;
688 uint64_t region64 = region;
689 struct log_c *lc = log->context;
690 static unsigned long long limit;
691 struct {
692 int64_t is_recovering;
693 uint64_t in_sync_hint;
694 } pkg;
695 size_t rdata_size = sizeof(pkg);
698 * Once the mirror has been reported to be in-sync,
699 * it will never again ask for recovery work. So,
700 * we can safely say there is not a remote machine
701 * recovering if the device is in-sync. (in_sync_hint
702 * must be reset at resume time.)
704 if (region < lc->in_sync_hint)
705 return 0;
706 else if (jiffies < limit)
707 return 1;
709 limit = jiffies + (HZ / 4);
710 r = userspace_do_request(lc, lc->uuid, DM_ULOG_IS_REMOTE_RECOVERING,
711 (char *)&region64, sizeof(region64),
712 (char *)&pkg, &rdata_size);
713 if (r)
714 return 1;
716 lc->in_sync_hint = pkg.in_sync_hint;
718 return (int)pkg.is_recovering;
721 static struct dm_dirty_log_type _userspace_type = {
722 .name = "userspace",
723 .module = THIS_MODULE,
724 .ctr = userspace_ctr,
725 .dtr = userspace_dtr,
726 .presuspend = userspace_presuspend,
727 .postsuspend = userspace_postsuspend,
728 .resume = userspace_resume,
729 .get_region_size = userspace_get_region_size,
730 .is_clean = userspace_is_clean,
731 .in_sync = userspace_in_sync,
732 .flush = userspace_flush,
733 .mark_region = userspace_mark_region,
734 .clear_region = userspace_clear_region,
735 .get_resync_work = userspace_get_resync_work,
736 .set_region_sync = userspace_set_region_sync,
737 .get_sync_count = userspace_get_sync_count,
738 .status = userspace_status,
739 .is_remote_recovering = userspace_is_remote_recovering,
742 static int __init userspace_dirty_log_init(void)
744 int r = 0;
746 flush_entry_pool = mempool_create(100, flush_entry_alloc,
747 flush_entry_free, NULL);
749 if (!flush_entry_pool) {
750 DMWARN("Unable to create flush_entry_pool: No memory.");
751 return -ENOMEM;
754 r = dm_ulog_tfr_init();
755 if (r) {
756 DMWARN("Unable to initialize userspace log communications");
757 mempool_destroy(flush_entry_pool);
758 return r;
761 r = dm_dirty_log_type_register(&_userspace_type);
762 if (r) {
763 DMWARN("Couldn't register userspace dirty log type");
764 dm_ulog_tfr_exit();
765 mempool_destroy(flush_entry_pool);
766 return r;
769 DMINFO("version " DM_LOG_USERSPACE_VSN " loaded");
770 return 0;
773 static void __exit userspace_dirty_log_exit(void)
775 dm_dirty_log_type_unregister(&_userspace_type);
776 dm_ulog_tfr_exit();
777 mempool_destroy(flush_entry_pool);
779 DMINFO("version " DM_LOG_USERSPACE_VSN " unloaded");
780 return;
783 module_init(userspace_dirty_log_init);
784 module_exit(userspace_dirty_log_exit);
786 MODULE_DESCRIPTION(DM_NAME " userspace dirty log link");
787 MODULE_AUTHOR("Jonathan Brassow <dm-devel@redhat.com>");
788 MODULE_LICENSE("GPL");