drivers/mfd/rc5t583.c

   1 /*
   2  * Core driver access RC5T583 power management chip.
   3  *
   4  * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
   5  * Author: Laxman dewangan <ldewangan@nvidia.com>
   6  *
   7  * Based on code
   8  *      Copyright (C) 2011 RICOH COMPANY,LTD
   9  *
  10  * This program is free software; you can redistribute it and/or modify it
  11  * under the terms and conditions of the GNU General Public License,
  12  * version 2, as published by the Free Software Foundation.
  13  *
  14  * This program is distributed in the hope it will be useful, but WITHOUT
  15  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  16  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  17  * more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  21  *
  22  */
  23 #include <linux/interrupt.h>
  24 #include <linux/irq.h>
  25 #include <linux/kernel.h>
  26 #include <linux/module.h>
  27 #include <linux/init.h>
  28 #include <linux/err.h>
  29 #include <linux/slab.h>
  30 #include <linux/i2c.h>
  31 #include <linux/mfd/core.h>
  32 #include <linux/mfd/rc5t583.h>
  33 #include <linux/regmap.h>
  34
  35 #define RICOH_ONOFFSEL_REG      0x10
  36 #define RICOH_SWCTL_REG         0x5E
  37
  38 struct deepsleep_control_data {
  39         u8 reg_add;
  40         u8 ds_pos_bit;
  41 };
  42
  43 #define DEEPSLEEP_INIT(_id, _reg, _pos)         \
  44         {                                       \
  45                 .reg_add = RC5T583_##_reg,      \
  46                 .ds_pos_bit = _pos,             \
  47         }
  48
  49 static struct deepsleep_control_data deepsleep_data[] = {
  50         DEEPSLEEP_INIT(DC0, SLPSEQ1, 0),
  51         DEEPSLEEP_INIT(DC1, SLPSEQ1, 4),
  52         DEEPSLEEP_INIT(DC2, SLPSEQ2, 0),
  53         DEEPSLEEP_INIT(DC3, SLPSEQ2, 4),
  54         DEEPSLEEP_INIT(LDO0, SLPSEQ3, 0),
  55         DEEPSLEEP_INIT(LDO1, SLPSEQ3, 4),
  56         DEEPSLEEP_INIT(LDO2, SLPSEQ4, 0),
  57         DEEPSLEEP_INIT(LDO3, SLPSEQ4, 4),
  58         DEEPSLEEP_INIT(LDO4, SLPSEQ5, 0),
  59         DEEPSLEEP_INIT(LDO5, SLPSEQ5, 4),
  60         DEEPSLEEP_INIT(LDO6, SLPSEQ6, 0),
  61         DEEPSLEEP_INIT(LDO7, SLPSEQ6, 4),
  62         DEEPSLEEP_INIT(LDO8, SLPSEQ7, 0),
  63         DEEPSLEEP_INIT(LDO9, SLPSEQ7, 4),
  64         DEEPSLEEP_INIT(PSO0, SLPSEQ8, 0),
  65         DEEPSLEEP_INIT(PSO1, SLPSEQ8, 4),
  66         DEEPSLEEP_INIT(PSO2, SLPSEQ9, 0),
  67         DEEPSLEEP_INIT(PSO3, SLPSEQ9, 4),
  68         DEEPSLEEP_INIT(PSO4, SLPSEQ10, 0),
  69         DEEPSLEEP_INIT(PSO5, SLPSEQ10, 4),
  70         DEEPSLEEP_INIT(PSO6, SLPSEQ11, 0),
  71         DEEPSLEEP_INIT(PSO7, SLPSEQ11, 4),
  72 };
  73
  74 #define EXT_PWR_REQ             \
  75         (RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL)
  76
  77 static struct mfd_cell rc5t583_subdevs[] = {
  78         {.name = "rc5t583-regulator",},
  79         {.name = "rc5t583-rtc",      },
  80         {.name = "rc5t583-key",      }
  81 };
  82
  83 static int __rc5t583_set_ext_pwrreq1_control(struct device *dev,
  84         int id, int ext_pwr, int slots)
  85 {
  86         int ret;
  87         uint8_t sleepseq_val;
  88         unsigned int en_bit;
  89         unsigned int slot_bit;
  90
  91         if (id == RC5T583_DS_DC0) {
  92                 dev_err(dev, "PWRREQ1 is invalid control for rail %d\n", id);
  93                 return -EINVAL;
  94         }
  95
  96         en_bit = deepsleep_data[id].ds_pos_bit;
  97         slot_bit = en_bit + 1;
  98         ret = rc5t583_read(dev, deepsleep_data[id].reg_add, &sleepseq_val);
  99         if (ret < 0) {
 100                 dev_err(dev, "Error in reading reg 0x%x\n",
 101                                 deepsleep_data[id].reg_add);
 102                 return ret;
 103         }
 104
 105         sleepseq_val &= ~(0xF << en_bit);
 106         sleepseq_val |= BIT(en_bit);
 107         sleepseq_val |= ((slots & 0x7) << slot_bit);
 108         ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(1));
 109         if (ret < 0) {
 110                 dev_err(dev, "Error in updating the 0x%02x register\n",
 111                                 RICOH_ONOFFSEL_REG);
 112                 return ret;
 113         }
 114
 115         ret = rc5t583_write(dev, deepsleep_data[id].reg_add, sleepseq_val);
 116         if (ret < 0) {
 117                 dev_err(dev, "Error in writing reg 0x%x\n",
 118                                 deepsleep_data[id].reg_add);
 119                 return ret;
 120         }
 121
 122         if (id == RC5T583_DS_LDO4) {
 123                 ret = rc5t583_write(dev, RICOH_SWCTL_REG, 0x1);
 124                 if (ret < 0)
 125                         dev_err(dev, "Error in writing reg 0x%x\n",
 126                                 RICOH_SWCTL_REG);
 127         }
 128         return ret;
 129 }
 130
 131 static int __rc5t583_set_ext_pwrreq2_control(struct device *dev,
 132         int id, int ext_pwr)
 133 {
 134         int ret;
 135
 136         if (id != RC5T583_DS_DC0) {
 137                 dev_err(dev, "PWRREQ2 is invalid control for rail %d\n", id);
 138                 return -EINVAL;
 139         }
 140
 141         ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(2));
 142         if (ret < 0)
 143                 dev_err(dev, "Error in updating the ONOFFSEL 0x10 register\n");
 144         return ret;
 145 }
 146
 147 int rc5t583_ext_power_req_config(struct device *dev, int ds_id,
 148         int ext_pwr_req, int deepsleep_slot_nr)
 149 {
 150         if ((ext_pwr_req & EXT_PWR_REQ) == EXT_PWR_REQ)
 151                 return -EINVAL;
 152
 153         if (ext_pwr_req & RC5T583_EXT_PWRREQ1_CONTROL)
 154                 return __rc5t583_set_ext_pwrreq1_control(dev, ds_id,
 155                                 ext_pwr_req, deepsleep_slot_nr);
 156
 157         if (ext_pwr_req & RC5T583_EXT_PWRREQ2_CONTROL)
 158                 return __rc5t583_set_ext_pwrreq2_control(dev,
 159                         ds_id, ext_pwr_req);
 160         return 0;
 161 }
 162 EXPORT_SYMBOL(rc5t583_ext_power_req_config);
 163
 164 static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583,
 165         struct rc5t583_platform_data *pdata)
 166 {
 167         int ret;
 168         int i;
 169         uint8_t on_off_val = 0;
 170
 171         /*  Clear ONOFFSEL register */
 172         if (pdata->enable_shutdown)
 173                 on_off_val = 0x1;
 174
 175         ret = rc5t583_write(rc5t583->dev, RICOH_ONOFFSEL_REG, on_off_val);
 176         if (ret < 0)
 177                 dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n",
 178                                         RICOH_ONOFFSEL_REG, ret);
 179
 180         ret = rc5t583_write(rc5t583->dev, RICOH_SWCTL_REG, 0x0);
 181         if (ret < 0)
 182                 dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n",
 183                                         RICOH_SWCTL_REG, ret);
 184
 185         /* Clear sleep sequence register */
 186         for (i = RC5T583_SLPSEQ1; i <= RC5T583_SLPSEQ11; ++i) {
 187                 ret = rc5t583_write(rc5t583->dev, i, 0x0);
 188                 if (ret < 0)
 189                         dev_warn(rc5t583->dev,
 190                                 "Error in writing reg 0x%02x error: %d\n",
 191                                 i, ret);
 192         }
 193         return 0;
 194 }
 195
 196 static bool volatile_reg(struct device *dev, unsigned int reg)
 197 {
 198         /* Enable caching in interrupt registers */
 199         switch (reg) {
 200         case RC5T583_INT_EN_SYS1:
 201         case RC5T583_INT_EN_SYS2:
 202         case RC5T583_INT_EN_DCDC:
 203         case RC5T583_INT_EN_RTC:
 204         case RC5T583_INT_EN_ADC1:
 205         case RC5T583_INT_EN_ADC2:
 206         case RC5T583_INT_EN_ADC3:
 207         case RC5T583_GPIO_GPEDGE1:
 208         case RC5T583_GPIO_GPEDGE2:
 209         case RC5T583_GPIO_EN_INT:
 210                 return false;
 211
 212         case RC5T583_GPIO_MON_IOIN:
 213                 /* This is gpio input register */
 214                 return true;
 215
 216         default:
 217                 /* Enable caching in gpio registers */
 218                 if ((reg >= RC5T583_GPIO_IOSEL) &&
 219                                 (reg <= RC5T583_GPIO_GPOFUNC))
 220                         return false;
 221
 222                 /* Enable caching in sleep seq registers */
 223                 if ((reg >= RC5T583_SLPSEQ1) && (reg <= RC5T583_SLPSEQ11))
 224                         return false;
 225
 226                 /* Enable caching of regulator registers */
 227                 if ((reg >= RC5T583_REG_DC0CTL) && (reg <= RC5T583_REG_SR3CTL))
 228                         return false;
 229                 if ((reg >= RC5T583_REG_LDOEN1) &&
 230                                         (reg <= RC5T583_REG_LDO9DAC_DS))
 231                         return false;
 232
 233                 break;
 234         }
 235
 236         return true;
 237 }
 238
 239 static const struct regmap_config rc5t583_regmap_config = {
 240         .reg_bits = 8,
 241         .val_bits = 8,
 242         .volatile_reg = volatile_reg,
 243         .max_register = RC5T583_MAX_REGS,
 244         .num_reg_defaults_raw = RC5T583_MAX_REGS,
 245         .cache_type = REGCACHE_RBTREE,
 246 };
 247
 248 static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c,
 249                               const struct i2c_device_id *id)
 250 {
 251         struct rc5t583 *rc5t583;
 252         struct rc5t583_platform_data *pdata = i2c->dev.platform_data;
 253         int ret;
 254         bool irq_init_success = false;
 255
 256         if (!pdata) {
 257                 dev_err(&i2c->dev, "Err: Platform data not found\n");
 258                 return -EINVAL;
 259         }
 260
 261         rc5t583 = devm_kzalloc(&i2c->dev, sizeof(struct rc5t583), GFP_KERNEL);
 262         if (!rc5t583) {
 263                 dev_err(&i2c->dev, "Memory allocation failed\n");
 264                 return -ENOMEM;
 265         }
 266
 267         rc5t583->dev = &i2c->dev;
 268         i2c_set_clientdata(i2c, rc5t583);
 269
 270         rc5t583->regmap = regmap_init_i2c(i2c, &rc5t583_regmap_config);
 271         if (IS_ERR(rc5t583->regmap)) {
 272                 ret = PTR_ERR(rc5t583->regmap);
 273                 dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
 274                 return ret;
 275         }
 276
 277         ret = rc5t583_clear_ext_power_req(rc5t583, pdata);
 278         if (ret < 0)
 279                 goto err_irq_init;
 280
 281         if (i2c->irq) {
 282                 ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base);
 283                 /* Still continue with waring if irq init fails */
 284                 if (ret)
 285                         dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret);
 286                 else
 287                         irq_init_success = true;
 288         }
 289
 290         ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs,
 291                         ARRAY_SIZE(rc5t583_subdevs), NULL, 0);
 292         if (ret) {
 293                 dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret);
 294                 goto err_add_devs;
 295         }
 296
 297         return 0;
 298
 299 err_add_devs:
 300         if (irq_init_success)
 301                 rc5t583_irq_exit(rc5t583);
 302 err_irq_init:
 303         regmap_exit(rc5t583->regmap);
 304         return ret;
 305 }
 306
 307 static int  __devexit rc5t583_i2c_remove(struct i2c_client *i2c)
 308 {
 309         struct rc5t583 *rc5t583 = i2c_get_clientdata(i2c);
 310
 311         mfd_remove_devices(rc5t583->dev);
 312         rc5t583_irq_exit(rc5t583);
 313         regmap_exit(rc5t583->regmap);
 314         return 0;
 315 }
 316
 317 static const struct i2c_device_id rc5t583_i2c_id[] = {
 318         {.name = "rc5t583", .driver_data = 0},
 319         {}
 320 };
 321
 322 MODULE_DEVICE_TABLE(i2c, rc5t583_i2c_id);
 323
 324 static struct i2c_driver rc5t583_i2c_driver = {
 325         .driver = {
 326                    .name = "rc5t583",
 327                    .owner = THIS_MODULE,
 328                    },
 329         .probe = rc5t583_i2c_probe,
 330         .remove = __devexit_p(rc5t583_i2c_remove),
 331         .id_table = rc5t583_i2c_id,
 332 };
 333
 334 static int __init rc5t583_i2c_init(void)
 335 {
 336         return i2c_add_driver(&rc5t583_i2c_driver);
 337 }
 338 subsys_initcall(rc5t583_i2c_init);
 339
 340 static void __exit rc5t583_i2c_exit(void)
 341 {
 342         i2c_del_driver(&rc5t583_i2c_driver);
 343 }
 344
 345 module_exit(rc5t583_i2c_exit);
 346
 347 MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
 348 MODULE_DESCRIPTION("RICOH RC5T583 power management system device driver");
 349 MODULE_LICENSE("GPL v2");