gpio-lynxpoint: force gpio_get() to return "1" and "0" only
[linux/fpc-iii.git] / include / scsi / libsas.h
blobf843dd8722a97eb9ca7106c6e09f8dd43a6e903c
1 /*
2 * SAS host prototypes and structures header file
4 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7 * This file is licensed under GPLv2.
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
22 * USA
26 #ifndef _LIBSAS_H_
27 #define _LIBSAS_H_
30 #include <linux/timer.h>
31 #include <linux/pci.h>
32 #include <scsi/sas.h>
33 #include <linux/libata.h>
34 #include <linux/list.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37 #include <scsi/scsi_transport_sas.h>
38 #include <linux/scatterlist.h>
39 #include <linux/slab.h>
41 struct block_device;
43 enum sas_class {
44 SAS,
45 EXPANDER
48 enum sas_phy_role {
49 PHY_ROLE_NONE = 0,
50 PHY_ROLE_TARGET = 0x40,
51 PHY_ROLE_INITIATOR = 0x80,
54 enum sas_phy_type {
55 PHY_TYPE_PHYSICAL,
56 PHY_TYPE_VIRTUAL
59 /* The events are mnemonically described in sas_dump.c
60 * so when updating/adding events here, please also
61 * update the other file too.
63 enum ha_event {
64 HAE_RESET = 0U,
65 HA_NUM_EVENTS = 1,
68 enum port_event {
69 PORTE_BYTES_DMAED = 0U,
70 PORTE_BROADCAST_RCVD = 1,
71 PORTE_LINK_RESET_ERR = 2,
72 PORTE_TIMER_EVENT = 3,
73 PORTE_HARD_RESET = 4,
74 PORT_NUM_EVENTS = 5,
77 enum phy_event {
78 PHYE_LOSS_OF_SIGNAL = 0U,
79 PHYE_OOB_DONE = 1,
80 PHYE_OOB_ERROR = 2,
81 PHYE_SPINUP_HOLD = 3, /* hot plug SATA, no COMWAKE sent */
82 PHYE_RESUME_TIMEOUT = 4,
83 PHY_NUM_EVENTS = 5,
86 enum discover_event {
87 DISCE_DISCOVER_DOMAIN = 0U,
88 DISCE_REVALIDATE_DOMAIN = 1,
89 DISCE_PORT_GONE = 2,
90 DISCE_PROBE = 3,
91 DISCE_SUSPEND = 4,
92 DISCE_RESUME = 5,
93 DISCE_DESTRUCT = 6,
94 DISC_NUM_EVENTS = 7,
97 /* ---------- Expander Devices ---------- */
99 #define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
100 #define to_dev_attr(_attr) container_of(_attr, struct domain_dev_attribute,\
101 attr)
103 enum routing_attribute {
104 DIRECT_ROUTING,
105 SUBTRACTIVE_ROUTING,
106 TABLE_ROUTING,
109 enum ex_phy_state {
110 PHY_EMPTY,
111 PHY_VACANT,
112 PHY_NOT_PRESENT,
113 PHY_DEVICE_DISCOVERED
116 struct ex_phy {
117 int phy_id;
119 enum ex_phy_state phy_state;
121 enum sas_device_type attached_dev_type;
122 enum sas_linkrate linkrate;
124 u8 attached_sata_host:1;
125 u8 attached_sata_dev:1;
126 u8 attached_sata_ps:1;
128 enum sas_protocol attached_tproto;
129 enum sas_protocol attached_iproto;
131 u8 attached_sas_addr[SAS_ADDR_SIZE];
132 u8 attached_phy_id;
134 int phy_change_count;
135 enum routing_attribute routing_attr;
136 u8 virtual:1;
138 int last_da_index;
140 struct sas_phy *phy;
141 struct sas_port *port;
144 struct expander_device {
145 struct list_head children;
147 int ex_change_count;
148 u16 max_route_indexes;
149 u8 num_phys;
151 u8 t2t_supp:1;
152 u8 configuring:1;
153 u8 conf_route_table:1;
155 u8 enclosure_logical_id[8];
157 struct ex_phy *ex_phy;
158 struct sas_port *parent_port;
160 struct mutex cmd_mutex;
163 /* ---------- SATA device ---------- */
164 enum ata_command_set {
165 ATA_COMMAND_SET = 0,
166 ATAPI_COMMAND_SET = 1,
169 #define ATA_RESP_FIS_SIZE 24
171 struct sata_device {
172 enum ata_command_set command_set;
173 struct smp_resp rps_resp; /* report_phy_sata_resp */
174 u8 port_no; /* port number, if this is a PM (Port) */
175 int pm_result;
177 struct ata_port *ap;
178 struct ata_host ata_host;
179 u8 fis[ATA_RESP_FIS_SIZE];
182 struct ssp_device {
183 struct list_head eh_list_node; /* pending a user requested eh action */
184 struct scsi_lun reset_lun;
187 enum {
188 SAS_DEV_GONE,
189 SAS_DEV_FOUND, /* device notified to lldd */
190 SAS_DEV_DESTROY,
191 SAS_DEV_EH_PENDING,
192 SAS_DEV_LU_RESET,
193 SAS_DEV_RESET,
196 struct domain_device {
197 spinlock_t done_lock;
198 enum sas_device_type dev_type;
200 enum sas_linkrate linkrate;
201 enum sas_linkrate min_linkrate;
202 enum sas_linkrate max_linkrate;
204 int pathways;
206 struct domain_device *parent;
207 struct list_head siblings; /* devices on the same level */
208 struct asd_sas_port *port; /* shortcut to root of the tree */
209 struct sas_phy *phy;
211 struct list_head dev_list_node;
212 struct list_head disco_list_node; /* awaiting probe or destruct */
214 enum sas_protocol iproto;
215 enum sas_protocol tproto;
217 struct sas_rphy *rphy;
219 u8 sas_addr[SAS_ADDR_SIZE];
220 u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
222 u8 frame_rcvd[32];
224 union {
225 struct expander_device ex_dev;
226 struct sata_device sata_dev; /* STP & directly attached */
227 struct ssp_device ssp_dev;
230 void *lldd_dev;
231 unsigned long state;
232 struct kref kref;
235 struct sas_work {
236 struct list_head drain_node;
237 struct work_struct work;
240 static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *))
242 INIT_WORK(&sw->work, fn);
243 INIT_LIST_HEAD(&sw->drain_node);
246 struct sas_discovery_event {
247 struct sas_work work;
248 struct asd_sas_port *port;
251 static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work)
253 struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work);
255 return ev;
258 struct sas_discovery {
259 struct sas_discovery_event disc_work[DISC_NUM_EVENTS];
260 unsigned long pending;
261 u8 fanout_sas_addr[8];
262 u8 eeds_a[8];
263 u8 eeds_b[8];
264 int max_level;
267 /* The port struct is Class:RW, driver:RO */
268 struct asd_sas_port {
269 /* private: */
270 struct completion port_gone_completion;
272 struct sas_discovery disc;
273 struct domain_device *port_dev;
274 spinlock_t dev_list_lock;
275 struct list_head dev_list;
276 struct list_head disco_list;
277 struct list_head destroy_list;
278 enum sas_linkrate linkrate;
280 struct sas_work work;
281 int suspended;
283 /* public: */
284 int id;
286 enum sas_class class;
287 u8 sas_addr[SAS_ADDR_SIZE];
288 u8 attached_sas_addr[SAS_ADDR_SIZE];
289 enum sas_protocol iproto;
290 enum sas_protocol tproto;
292 enum sas_oob_mode oob_mode;
294 spinlock_t phy_list_lock;
295 struct list_head phy_list;
296 int num_phys;
297 u32 phy_mask;
299 struct sas_ha_struct *ha;
301 struct sas_port *port;
303 void *lldd_port; /* not touched by the sas class code */
306 struct asd_sas_event {
307 struct sas_work work;
308 struct asd_sas_phy *phy;
311 static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work)
313 struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work);
315 return ev;
318 /* The phy pretty much is controlled by the LLDD.
319 * The class only reads those fields.
321 struct asd_sas_phy {
322 /* private: */
323 struct asd_sas_event port_events[PORT_NUM_EVENTS];
324 struct asd_sas_event phy_events[PHY_NUM_EVENTS];
326 unsigned long port_events_pending;
327 unsigned long phy_events_pending;
329 int error;
330 int suspended;
332 struct sas_phy *phy;
334 /* public: */
335 /* The following are class:RO, driver:R/W */
336 int enabled; /* must be set */
338 int id; /* must be set */
339 enum sas_class class;
340 enum sas_protocol iproto;
341 enum sas_protocol tproto;
343 enum sas_phy_type type;
344 enum sas_phy_role role;
345 enum sas_oob_mode oob_mode;
346 enum sas_linkrate linkrate;
348 u8 *sas_addr; /* must be set */
349 u8 attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
351 spinlock_t frame_rcvd_lock;
352 u8 *frame_rcvd; /* must be set */
353 int frame_rcvd_size;
355 spinlock_t sas_prim_lock;
356 u32 sas_prim;
358 struct list_head port_phy_el; /* driver:RO */
359 struct asd_sas_port *port; /* Class:RW, driver: RO */
361 struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
363 void *lldd_phy; /* not touched by the sas_class_code */
366 struct scsi_core {
367 struct Scsi_Host *shost;
369 struct mutex task_queue_flush;
370 spinlock_t task_queue_lock;
371 struct list_head task_queue;
372 int task_queue_size;
374 struct task_struct *queue_thread;
377 struct sas_ha_event {
378 struct sas_work work;
379 struct sas_ha_struct *ha;
382 static inline struct sas_ha_event *to_sas_ha_event(struct work_struct *work)
384 struct sas_ha_event *ev = container_of(work, typeof(*ev), work.work);
386 return ev;
389 enum sas_ha_state {
390 SAS_HA_REGISTERED,
391 SAS_HA_DRAINING,
392 SAS_HA_ATA_EH_ACTIVE,
393 SAS_HA_FROZEN,
396 struct sas_ha_struct {
397 /* private: */
398 struct sas_ha_event ha_events[HA_NUM_EVENTS];
399 unsigned long pending;
401 struct list_head defer_q; /* work queued while draining */
402 struct mutex drain_mutex;
403 unsigned long state;
404 spinlock_t lock;
405 int eh_active;
406 wait_queue_head_t eh_wait_q;
407 struct list_head eh_dev_q;
409 struct mutex disco_mutex;
411 struct scsi_core core;
413 /* public: */
414 char *sas_ha_name;
415 struct device *dev; /* should be set */
416 struct module *lldd_module; /* should be set */
418 u8 *sas_addr; /* must be set */
419 u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
421 spinlock_t phy_port_lock;
422 struct asd_sas_phy **sas_phy; /* array of valid pointers, must be set */
423 struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
424 int num_phys; /* must be set, gt 0, static */
426 /* The class calls this to send a task for execution. */
427 int lldd_max_execute_num;
428 int lldd_queue_size;
429 int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
430 * their siblings when forming wide ports */
432 /* LLDD calls these to notify the class of an event. */
433 void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
434 void (*notify_port_event)(struct asd_sas_phy *, enum port_event);
435 void (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
437 void *lldd_ha; /* not touched by sas class code */
439 struct list_head eh_done_q; /* complete via scsi_eh_flush_done_q */
440 struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */
443 #define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
445 static inline struct domain_device *
446 starget_to_domain_dev(struct scsi_target *starget) {
447 return starget->hostdata;
450 static inline struct domain_device *
451 sdev_to_domain_dev(struct scsi_device *sdev) {
452 return starget_to_domain_dev(sdev->sdev_target);
455 static inline struct ata_device *sas_to_ata_dev(struct domain_device *dev)
457 return &dev->sata_dev.ap->link.device[0];
460 static inline struct domain_device *
461 cmd_to_domain_dev(struct scsi_cmnd *cmd)
463 return sdev_to_domain_dev(cmd->device);
466 void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
468 /* Before calling a notify event, LLDD should use this function
469 * when the link is severed (possibly from its tasklet).
470 * The idea is that the Class only reads those, while the LLDD,
471 * can R/W these (thus avoiding a race).
473 static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
475 phy->oob_mode = OOB_NOT_CONNECTED;
476 phy->linkrate = SAS_LINK_RATE_UNKNOWN;
479 static inline unsigned int to_sas_gpio_od(int device, int bit)
481 return 3 * device + bit;
484 static inline void sas_put_local_phy(struct sas_phy *phy)
486 put_device(&phy->dev);
489 #ifdef CONFIG_SCSI_SAS_HOST_SMP
490 int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count);
491 #else
492 static inline int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
494 return -1;
496 #endif
498 /* ---------- Tasks ---------- */
500 service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED |
501 exec_status | | |
502 ---------------------+---------------------+-----------------------+
503 SAM_... | X | |
504 DEV_NO_RESPONSE | X | X |
505 INTERRUPTED | X | |
506 QUEUE_FULL | | X |
507 DEVICE_UNKNOWN | | X |
508 SG_ERR | | X |
509 ---------------------+---------------------+-----------------------+
512 enum service_response {
513 SAS_TASK_COMPLETE,
514 SAS_TASK_UNDELIVERED = -1,
517 enum exec_status {
518 /* The SAM_STAT_.. codes fit in the lower 6 bits, alias some of
519 * them here to silence 'case value not in enumerated type' warnings
521 __SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION,
523 SAS_DEV_NO_RESPONSE = 0x80,
524 SAS_DATA_UNDERRUN,
525 SAS_DATA_OVERRUN,
526 SAS_INTERRUPTED,
527 SAS_QUEUE_FULL,
528 SAS_DEVICE_UNKNOWN,
529 SAS_SG_ERR,
530 SAS_OPEN_REJECT,
531 SAS_OPEN_TO,
532 SAS_PROTO_RESPONSE,
533 SAS_PHY_DOWN,
534 SAS_NAK_R_ERR,
535 SAS_PENDING,
536 SAS_ABORTED_TASK,
539 /* When a task finishes with a response, the LLDD examines the
540 * response:
541 * - For an ATA task task_status_struct::stat is set to
542 * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
543 * contents of struct ata_task_resp.
544 * - For SSP tasks, if no data is present or status/TMF response
545 * is valid, task_status_struct::stat is set. If data is present
546 * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
547 * task_status_struct::buf_valid_size, and task_status_struct::stat is
548 * set to SAM_CHECK_COND.
550 * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
551 * for ATA task.
553 * "frame_len" is the total frame length, which could be more or less
554 * than actually copied.
556 * Tasks ending with response, always set the residual field.
558 struct ata_task_resp {
559 u16 frame_len;
560 u8 ending_fis[ATA_RESP_FIS_SIZE]; /* dev to host or data-in */
563 #define SAS_STATUS_BUF_SIZE 96
565 struct task_status_struct {
566 enum service_response resp;
567 enum exec_status stat;
568 int buf_valid_size;
570 u8 buf[SAS_STATUS_BUF_SIZE];
572 u32 residual;
573 enum sas_open_rej_reason open_rej_reason;
576 /* ATA and ATAPI task queuable to a SAS LLDD.
578 struct sas_ata_task {
579 struct host_to_dev_fis fis;
580 u8 atapi_packet[16]; /* 0 if not ATAPI task */
582 u8 retry_count; /* hardware retry, should be > 0 */
584 u8 dma_xfer:1; /* PIO:0 or DMA:1 */
585 u8 use_ncq:1;
586 u8 set_affil_pol:1;
587 u8 stp_affil_pol:1;
589 u8 device_control_reg_update:1;
592 struct sas_smp_task {
593 struct scatterlist smp_req;
594 struct scatterlist smp_resp;
597 enum task_attribute {
598 TASK_ATTR_SIMPLE = 0,
599 TASK_ATTR_HOQ = 1,
600 TASK_ATTR_ORDERED= 2,
601 TASK_ATTR_ACA = 4,
604 struct sas_ssp_task {
605 u8 retry_count; /* hardware retry, should be > 0 */
607 u8 LUN[8];
608 u8 enable_first_burst:1;
609 enum task_attribute task_attr;
610 u8 task_prio;
611 struct scsi_cmnd *cmd;
614 struct sas_task {
615 struct domain_device *dev;
616 struct list_head list;
618 spinlock_t task_state_lock;
619 unsigned task_state_flags;
621 enum sas_protocol task_proto;
623 union {
624 struct sas_ata_task ata_task;
625 struct sas_smp_task smp_task;
626 struct sas_ssp_task ssp_task;
629 struct scatterlist *scatter;
630 int num_scatter;
631 u32 total_xfer_len;
632 u8 data_dir:2; /* Use PCI_DMA_... */
634 struct task_status_struct task_status;
635 void (*task_done)(struct sas_task *);
637 void *lldd_task; /* for use by LLDDs */
638 void *uldd_task;
639 struct sas_task_slow *slow_task;
642 struct sas_task_slow {
643 /* standard/extra infrastructure for slow path commands (SMP and
644 * internal lldd commands
646 struct timer_list timer;
647 struct completion completion;
650 #define SAS_TASK_STATE_PENDING 1
651 #define SAS_TASK_STATE_DONE 2
652 #define SAS_TASK_STATE_ABORTED 4
653 #define SAS_TASK_NEED_DEV_RESET 8
654 #define SAS_TASK_AT_INITIATOR 16
656 extern struct sas_task *sas_alloc_task(gfp_t flags);
657 extern struct sas_task *sas_alloc_slow_task(gfp_t flags);
658 extern void sas_free_task(struct sas_task *task);
660 struct sas_domain_function_template {
661 /* The class calls these to notify the LLDD of an event. */
662 void (*lldd_port_formed)(struct asd_sas_phy *);
663 void (*lldd_port_deformed)(struct asd_sas_phy *);
665 /* The class calls these when a device is found or gone. */
666 int (*lldd_dev_found)(struct domain_device *);
667 void (*lldd_dev_gone)(struct domain_device *);
669 int (*lldd_execute_task)(struct sas_task *, int num,
670 gfp_t gfp_flags);
672 /* Task Management Functions. Must be called from process context. */
673 int (*lldd_abort_task)(struct sas_task *);
674 int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
675 int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
676 int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
677 int (*lldd_I_T_nexus_reset)(struct domain_device *);
678 int (*lldd_ata_check_ready)(struct domain_device *);
679 void (*lldd_ata_set_dmamode)(struct domain_device *);
680 int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
681 int (*lldd_query_task)(struct sas_task *);
683 /* Port and Adapter management */
684 int (*lldd_clear_nexus_port)(struct asd_sas_port *);
685 int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
687 /* Phy management */
688 int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
690 /* GPIO support */
691 int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type,
692 u8 reg_index, u8 reg_count, u8 *write_data);
695 extern int sas_register_ha(struct sas_ha_struct *);
696 extern int sas_unregister_ha(struct sas_ha_struct *);
697 extern void sas_prep_resume_ha(struct sas_ha_struct *sas_ha);
698 extern void sas_resume_ha(struct sas_ha_struct *sas_ha);
699 extern void sas_suspend_ha(struct sas_ha_struct *sas_ha);
701 int sas_set_phy_speed(struct sas_phy *phy,
702 struct sas_phy_linkrates *rates);
703 int sas_phy_reset(struct sas_phy *phy, int hard_reset);
704 int sas_queue_up(struct sas_task *task);
705 extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *);
706 extern int sas_target_alloc(struct scsi_target *);
707 extern int sas_slave_configure(struct scsi_device *);
708 extern int sas_change_queue_depth(struct scsi_device *, int new_depth,
709 int reason);
710 extern int sas_change_queue_type(struct scsi_device *, int qt);
711 extern int sas_bios_param(struct scsi_device *,
712 struct block_device *,
713 sector_t capacity, int *hsc);
714 extern struct scsi_transport_template *
715 sas_domain_attach_transport(struct sas_domain_function_template *);
716 extern void sas_domain_release_transport(struct scsi_transport_template *);
718 int sas_discover_root_expander(struct domain_device *);
720 void sas_init_ex_attr(void);
722 int sas_ex_revalidate_domain(struct domain_device *);
724 void sas_unregister_domain_devices(struct asd_sas_port *port, int gone);
725 void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
726 int sas_discover_event(struct asd_sas_port *, enum discover_event ev);
728 int sas_discover_sata(struct domain_device *);
729 int sas_discover_end_dev(struct domain_device *);
731 void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *);
733 void sas_init_dev(struct domain_device *);
735 void sas_task_abort(struct sas_task *);
736 int sas_eh_abort_handler(struct scsi_cmnd *cmd);
737 int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
738 int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd);
740 extern void sas_target_destroy(struct scsi_target *);
741 extern int sas_slave_alloc(struct scsi_device *);
742 extern int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg);
743 extern int sas_drain_work(struct sas_ha_struct *ha);
745 extern int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
746 struct request *req);
748 extern void sas_ssp_task_response(struct device *dev, struct sas_task *task,
749 struct ssp_response_iu *iu);
750 struct sas_phy *sas_get_local_phy(struct domain_device *dev);
752 int sas_request_addr(struct Scsi_Host *shost, u8 *addr);
754 #endif /* _SASLIB_H_ */