drivers/scsi/mpt3sas/mpi/mpi2_sas.h

   1 /*
   2  * Copyright (c) 2000-2013 LSI Corporation.
   3  *
   4  *
   5  *          Name:  mpi2_sas.h
   6  *         Title:  MPI Serial Attached SCSI structures and definitions
   7  * Creation Date:  February 9, 2007
   8  *
   9  * mpi2_sas.h Version:  02.00.07
  10  *
  11  * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  12  *       prefix are for use only on MPI v2.5 products, and must not be used
  13  *       with MPI v2.0 products. Unless otherwise noted, names beginning with
  14  *       MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
  15  *
  16  * Version History
  17  * ---------------
  18  *
  19  * Date      Version   Description
  20  * --------  --------  ------------------------------------------------------
  21  * 04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
  22  * 06-26-07  02.00.01  Added Clear All Persistent Operation to SAS IO Unit
  23  *                     Control Request.
  24  * 10-02-08  02.00.02  Added Set IOC Parameter Operation to SAS IO Unit Control
  25  *                     Request.
  26  * 10-28-09  02.00.03  Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
  27  *                     to MPI2_SGE_IO_UNION since it supports chained SGLs.
  28  * 05-12-10  02.00.04  Modified some comments.
  29  * 08-11-10  02.00.05  Added NCQ operations to SAS IO Unit Control.
  30  * 11-18-11  02.00.06  Incorporating additions for MPI v2.5.
  31  * 07-10-12  02.00.07  Added MPI2_SATA_PT_SGE_UNION for use in the SATA
  32  *                     Passthrough Request message.
  33  * --------------------------------------------------------------------------
  34  */
  35
  36 #ifndef MPI2_SAS_H
  37 #define MPI2_SAS_H
  38
  39 /*
  40  *Values for SASStatus.
  41  */
  42 #define MPI2_SASSTATUS_SUCCESS                          (0x00)
  43 #define MPI2_SASSTATUS_UNKNOWN_ERROR                    (0x01)
  44 #define MPI2_SASSTATUS_INVALID_FRAME                    (0x02)
  45 #define MPI2_SASSTATUS_UTC_BAD_DEST                     (0x03)
  46 #define MPI2_SASSTATUS_UTC_BREAK_RECEIVED               (0x04)
  47 #define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED   (0x05)
  48 #define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST           (0x06)
  49 #define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED       (0x07)
  50 #define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY           (0x08)
  51 #define MPI2_SASSTATUS_UTC_WRONG_DESTINATION            (0x09)
  52 #define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT           (0x0A)
  53 #define MPI2_SASSTATUS_LONG_INFORMATION_UNIT            (0x0B)
  54 #define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA    (0x0C)
  55 #define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR    (0x0D)
  56 #define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED            (0x0E)
  57 #define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH       (0x0F)
  58 #define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA          (0x10)
  59 #define MPI2_SASSTATUS_DATA_OFFSET_ERROR                (0x11)
  60 #define MPI2_SASSTATUS_SDSF_NAK_RECEIVED                (0x12)
  61 #define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED           (0x13)
  62 #define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT       (0x14)
  63
  64 /*
  65  *Values for the SAS DeviceInfo field used in SAS Device Status Change Event
  66  *data and SAS Configuration pages.
  67  */
  68 #define MPI2_SAS_DEVICE_INFO_SEP                (0x00004000)
  69 #define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE       (0x00002000)
  70 #define MPI2_SAS_DEVICE_INFO_LSI_DEVICE         (0x00001000)
  71 #define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH      (0x00000800)
  72 #define MPI2_SAS_DEVICE_INFO_SSP_TARGET         (0x00000400)
  73 #define MPI2_SAS_DEVICE_INFO_STP_TARGET         (0x00000200)
  74 #define MPI2_SAS_DEVICE_INFO_SMP_TARGET         (0x00000100)
  75 #define MPI2_SAS_DEVICE_INFO_SATA_DEVICE        (0x00000080)
  76 #define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR      (0x00000040)
  77 #define MPI2_SAS_DEVICE_INFO_STP_INITIATOR      (0x00000020)
  78 #define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR      (0x00000010)
  79 #define MPI2_SAS_DEVICE_INFO_SATA_HOST          (0x00000008)
  80
  81 #define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE   (0x00000007)
  82 #define MPI2_SAS_DEVICE_INFO_NO_DEVICE          (0x00000000)
  83 #define MPI2_SAS_DEVICE_INFO_END_DEVICE         (0x00000001)
  84 #define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER      (0x00000002)
  85 #define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER    (0x00000003)
  86
  87 /*****************************************************************************
  88 *
  89 *       SAS Messages
  90 *
  91 *****************************************************************************/
  92
  93 /****************************************************************************
  94 * SMP Passthrough messages
  95 ****************************************************************************/
  96
  97 /*SMP Passthrough Request Message */
  98 typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST {
  99         U8 PassthroughFlags;    /*0x00 */
 100         U8 PhysicalPort;        /*0x01 */
 101         U8 ChainOffset;         /*0x02 */
 102         U8 Function;            /*0x03 */
 103         U16 RequestDataLength;  /*0x04 */
 104         U8 SGLFlags;            /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
 105         U8 MsgFlags;            /*0x07 */
 106         U8 VP_ID;               /*0x08 */
 107         U8 VF_ID;               /*0x09 */
 108         U16 Reserved1;          /*0x0A */
 109         U32 Reserved2;          /*0x0C */
 110         U64 SASAddress;         /*0x10 */
 111         U32 Reserved3;          /*0x18 */
 112         U32 Reserved4;          /*0x1C */
 113         MPI2_SIMPLE_SGE_UNION SGL;/*0x20 */
 114 } MPI2_SMP_PASSTHROUGH_REQUEST, *PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
 115         Mpi2SmpPassthroughRequest_t, *pMpi2SmpPassthroughRequest_t;
 116
 117 /*values for PassthroughFlags field */
 118 #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE      (0x80)
 119
 120 /*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
 121
 122 /*SMP Passthrough Reply Message */
 123 typedef struct _MPI2_SMP_PASSTHROUGH_REPLY {
 124         U8 PassthroughFlags;    /*0x00 */
 125         U8 PhysicalPort;        /*0x01 */
 126         U8 MsgLength;           /*0x02 */
 127         U8 Function;            /*0x03 */
 128         U16 ResponseDataLength; /*0x04 */
 129         U8 SGLFlags;            /*0x06 */
 130         U8 MsgFlags;            /*0x07 */
 131         U8 VP_ID;               /*0x08 */
 132         U8 VF_ID;               /*0x09 */
 133         U16 Reserved1;          /*0x0A */
 134         U8 Reserved2;           /*0x0C */
 135         U8 SASStatus;           /*0x0D */
 136         U16 IOCStatus;          /*0x0E */
 137         U32 IOCLogInfo;         /*0x10 */
 138         U32 Reserved3;          /*0x14 */
 139         U8 ResponseData[4];     /*0x18 */
 140 } MPI2_SMP_PASSTHROUGH_REPLY, *PTR_MPI2_SMP_PASSTHROUGH_REPLY,
 141         Mpi2SmpPassthroughReply_t, *pMpi2SmpPassthroughReply_t;
 142
 143 /*values for PassthroughFlags field */
 144 #define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE    (0x80)
 145
 146 /*values for SASStatus field are at the top of this file */
 147
 148 /****************************************************************************
 149 * SATA Passthrough messages
 150 ****************************************************************************/
 151
 152 typedef union _MPI2_SATA_PT_SGE_UNION {
 153         MPI2_SGE_SIMPLE_UNION MpiSimple;        /*MPI v2.0 only */
 154         MPI2_SGE_CHAIN_UNION MpiChain;  /*MPI v2.0 only */
 155         MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
 156         MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;    /*MPI v2.0 only */
 157         MPI25_IEEE_SGE_CHAIN64 IeeeChain64;     /*MPI v2.5 only */
 158 } MPI2_SATA_PT_SGE_UNION, *PTR_MPI2_SATA_PT_SGE_UNION,
 159         Mpi2SataPTSGEUnion_t, *pMpi2SataPTSGEUnion_t;
 160
 161 /*SATA Passthrough Request Message */
 162 typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST {
 163         U16 DevHandle;          /*0x00 */
 164         U8 ChainOffset;         /*0x02 */
 165         U8 Function;            /*0x03 */
 166         U16 PassthroughFlags;   /*0x04 */
 167         U8 SGLFlags;            /*0x06*//*MPI v2.0 only. Reserved on MPI v2.5*/
 168         U8 MsgFlags;            /*0x07 */
 169         U8 VP_ID;               /*0x08 */
 170         U8 VF_ID;               /*0x09 */
 171         U16 Reserved1;          /*0x0A */
 172         U32 Reserved2;          /*0x0C */
 173         U32 Reserved3;          /*0x10 */
 174         U32 Reserved4;          /*0x14 */
 175         U32 DataLength;         /*0x18 */
 176         U8 CommandFIS[20];      /*0x1C */
 177         MPI2_SATA_PT_SGE_UNION SGL;/*0x30*//*MPI v2.5: IEEE 64 elements only*/
 178 } MPI2_SATA_PASSTHROUGH_REQUEST, *PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
 179         Mpi2SataPassthroughRequest_t,
 180         *pMpi2SataPassthroughRequest_t;
 181
 182 /*values for PassthroughFlags field */
 183 #define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG      (0x0100)
 184 #define MPI2_SATA_PT_REQ_PT_FLAGS_DMA               (0x0020)
 185 #define MPI2_SATA_PT_REQ_PT_FLAGS_PIO               (0x0010)
 186 #define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU    (0x0004)
 187 #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE             (0x0002)
 188 #define MPI2_SATA_PT_REQ_PT_FLAGS_READ              (0x0001)
 189
 190 /*MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
 191
 192 /*SATA Passthrough Reply Message */
 193 typedef struct _MPI2_SATA_PASSTHROUGH_REPLY {
 194         U16 DevHandle;          /*0x00 */
 195         U8 MsgLength;           /*0x02 */
 196         U8 Function;            /*0x03 */
 197         U16 PassthroughFlags;   /*0x04 */
 198         U8 SGLFlags;            /*0x06 */
 199         U8 MsgFlags;            /*0x07 */
 200         U8 VP_ID;               /*0x08 */
 201         U8 VF_ID;               /*0x09 */
 202         U16 Reserved1;          /*0x0A */
 203         U8 Reserved2;           /*0x0C */
 204         U8 SASStatus;           /*0x0D */
 205         U16 IOCStatus;          /*0x0E */
 206         U32 IOCLogInfo;         /*0x10 */
 207         U8 StatusFIS[20];       /*0x14 */
 208         U32 StatusControlRegisters;     /*0x28 */
 209         U32 TransferCount;      /*0x2C */
 210 } MPI2_SATA_PASSTHROUGH_REPLY, *PTR_MPI2_SATA_PASSTHROUGH_REPLY,
 211         Mpi2SataPassthroughReply_t, *pMpi2SataPassthroughReply_t;
 212
 213 /*values for SASStatus field are at the top of this file */
 214
 215 /****************************************************************************
 216 * SAS IO Unit Control messages
 217 ****************************************************************************/
 218
 219 /*SAS IO Unit Control Request Message */
 220 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST {
 221         U8 Operation;           /*0x00 */
 222         U8 Reserved1;           /*0x01 */
 223         U8 ChainOffset;         /*0x02 */
 224         U8 Function;            /*0x03 */
 225         U16 DevHandle;          /*0x04 */
 226         U8 IOCParameter;        /*0x06 */
 227         U8 MsgFlags;            /*0x07 */
 228         U8 VP_ID;               /*0x08 */
 229         U8 VF_ID;               /*0x09 */
 230         U16 Reserved3;          /*0x0A */
 231         U16 Reserved4;          /*0x0C */
 232         U8 PhyNum;              /*0x0E */
 233         U8 PrimFlags;           /*0x0F */
 234         U32 Primitive;          /*0x10 */
 235         U8 LookupMethod;        /*0x14 */
 236         U8 Reserved5;           /*0x15 */
 237         U16 SlotNumber;         /*0x16 */
 238         U64 LookupAddress;      /*0x18 */
 239         U32 IOCParameterValue;  /*0x20 */
 240         U32 Reserved7;          /*0x24 */
 241         U32 Reserved8;          /*0x28 */
 242 } MPI2_SAS_IOUNIT_CONTROL_REQUEST,
 243         *PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
 244         Mpi2SasIoUnitControlRequest_t,
 245         *pMpi2SasIoUnitControlRequest_t;
 246
 247 /*values for the Operation field */
 248 #define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT        (0x02)
 249 #define MPI2_SAS_OP_PHY_LINK_RESET              (0x06)
 250 #define MPI2_SAS_OP_PHY_HARD_RESET              (0x07)
 251 #define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG         (0x08)
 252 #define MPI2_SAS_OP_SEND_PRIMITIVE              (0x0A)
 253 #define MPI2_SAS_OP_FORCE_FULL_DISCOVERY        (0x0B)
 254 #define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
 255 #define MPI2_SAS_OP_REMOVE_DEVICE               (0x0D)
 256 #define MPI2_SAS_OP_LOOKUP_MAPPING              (0x0E)
 257 #define MPI2_SAS_OP_SET_IOC_PARAMETER           (0x0F)
 258 #define MPI25_SAS_OP_ENABLE_FP_DEVICE           (0x10)
 259 #define MPI25_SAS_OP_DISABLE_FP_DEVICE          (0x11)
 260 #define MPI25_SAS_OP_ENABLE_FP_ALL              (0x12)
 261 #define MPI25_SAS_OP_DISABLE_FP_ALL             (0x13)
 262 #define MPI2_SAS_OP_DEV_ENABLE_NCQ              (0x14)
 263 #define MPI2_SAS_OP_DEV_DISABLE_NCQ             (0x15)
 264 #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN        (0x80)
 265
 266 /*values for the PrimFlags field */
 267 #define MPI2_SAS_PRIMFLAGS_SINGLE               (0x08)
 268 #define MPI2_SAS_PRIMFLAGS_TRIPLE               (0x02)
 269 #define MPI2_SAS_PRIMFLAGS_REDUNDANT            (0x01)
 270
 271 /*values for the LookupMethod field */
 272 #define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS          (0x01)
 273 #define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT   (0x02)
 274 #define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME      (0x03)
 275
 276 /*SAS IO Unit Control Reply Message */
 277 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY {
 278         U8 Operation;           /*0x00 */
 279         U8 Reserved1;           /*0x01 */
 280         U8 MsgLength;           /*0x02 */
 281         U8 Function;            /*0x03 */
 282         U16 DevHandle;          /*0x04 */
 283         U8 IOCParameter;        /*0x06 */
 284         U8 MsgFlags;            /*0x07 */
 285         U8 VP_ID;               /*0x08 */
 286         U8 VF_ID;               /*0x09 */
 287         U16 Reserved3;          /*0x0A */
 288         U16 Reserved4;          /*0x0C */
 289         U16 IOCStatus;          /*0x0E */
 290         U32 IOCLogInfo;         /*0x10 */
 291 } MPI2_SAS_IOUNIT_CONTROL_REPLY,
 292         *PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
 293         Mpi2SasIoUnitControlReply_t, *pMpi2SasIoUnitControlReply_t;
 294
 295 #endif