2 * Copyright (C) 2013 Imagination Technologies
3 * Author: Paul Burton <paul.burton@mips.com>
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
11 #include <linux/cpu.h>
12 #include <linux/delay.h>
14 #include <linux/sched/task_stack.h>
15 #include <linux/sched/hotplug.h>
16 #include <linux/slab.h>
17 #include <linux/smp.h>
18 #include <linux/types.h>
20 #include <asm/bcache.h>
21 #include <asm/mips-cps.h>
22 #include <asm/mips_mt.h>
23 #include <asm/mipsregs.h>
24 #include <asm/pm-cps.h>
25 #include <asm/r4kcache.h>
26 #include <asm/smp-cps.h>
30 static bool threads_disabled
;
31 static DECLARE_BITMAP(core_power
, NR_CPUS
);
33 struct core_boot_config
*mips_cps_core_bootcfg
;
35 static int __init
setup_nothreads(char *s
)
37 threads_disabled
= true;
40 early_param("nothreads", setup_nothreads
);
42 static unsigned core_vpe_count(unsigned int cluster
, unsigned core
)
47 return mips_cps_numvps(cluster
, core
);
50 static void __init
cps_smp_setup(void)
52 unsigned int nclusters
, ncores
, nvpes
, core_vpes
;
53 unsigned long core_entry
;
56 /* Detect & record VPE topology */
58 nclusters
= mips_cps_numclusters();
59 pr_info("%s topology ", cpu_has_mips_r6
? "VP" : "VPE");
60 for (cl
= 0; cl
< nclusters
; cl
++) {
65 ncores
= mips_cps_numcores(cl
);
66 for (c
= 0; c
< ncores
; c
++) {
67 core_vpes
= core_vpe_count(cl
, c
);
71 pr_cont("%u", core_vpes
);
73 /* Use the number of VPEs in cluster 0 core 0 for smp_num_siblings */
75 smp_num_siblings
= core_vpes
;
77 for (v
= 0; v
< min_t(int, core_vpes
, NR_CPUS
- nvpes
); v
++) {
78 cpu_set_cluster(&cpu_data
[nvpes
+ v
], cl
);
79 cpu_set_core(&cpu_data
[nvpes
+ v
], c
);
80 cpu_set_vpe_id(&cpu_data
[nvpes
+ v
], v
);
88 pr_cont(" total %u\n", nvpes
);
90 /* Indicate present CPUs (CPU being synonymous with VPE) */
91 for (v
= 0; v
< min_t(unsigned, nvpes
, NR_CPUS
); v
++) {
92 set_cpu_possible(v
, cpu_cluster(&cpu_data
[v
]) == 0);
93 set_cpu_present(v
, cpu_cluster(&cpu_data
[v
]) == 0);
94 __cpu_number_map
[v
] = v
;
95 __cpu_logical_map
[v
] = v
;
98 /* Set a coherent default CCA (CWB) */
99 change_c0_config(CONF_CM_CMASK
, 0x5);
101 /* Core 0 is powered up (we're running on it) */
102 bitmap_set(core_power
, 0, 1);
104 /* Initialise core 0 */
105 mips_cps_core_init();
107 /* Make core 0 coherent with everything */
108 write_gcr_cl_coherence(0xff);
110 if (mips_cm_revision() >= CM_REV_CM3
) {
111 core_entry
= CKSEG1ADDR((unsigned long)mips_cps_core_entry
);
112 write_gcr_bev_base(core_entry
);
115 #ifdef CONFIG_MIPS_MT_FPAFF
116 /* If we have an FPU, enroll ourselves in the FPU-full mask */
118 cpumask_set_cpu(0, &mt_fpu_cpumask
);
119 #endif /* CONFIG_MIPS_MT_FPAFF */
122 static void __init
cps_prepare_cpus(unsigned int max_cpus
)
124 unsigned ncores
, core_vpes
, c
, cca
;
125 bool cca_unsuitable
, cores_limited
;
128 mips_mt_set_cpuoptions();
130 /* Detect whether the CCA is unsuited to multi-core SMP */
131 cca
= read_c0_config() & CONF_CM_CMASK
;
135 /* The CCA is coherent, multi-core is fine */
136 cca_unsuitable
= false;
140 /* CCA is not coherent, multi-core is not usable */
141 cca_unsuitable
= true;
144 /* Warn the user if the CCA prevents multi-core */
145 cores_limited
= false;
146 if (cca_unsuitable
|| cpu_has_dc_aliases
) {
147 for_each_present_cpu(c
) {
148 if (cpus_are_siblings(smp_processor_id(), c
))
151 set_cpu_present(c
, false);
152 cores_limited
= true;
156 pr_warn("Using only one core due to %s%s%s\n",
157 cca_unsuitable
? "unsuitable CCA" : "",
158 (cca_unsuitable
&& cpu_has_dc_aliases
) ? " & " : "",
159 cpu_has_dc_aliases
? "dcache aliasing" : "");
162 * Patch the start of mips_cps_core_entry to provide:
166 entry_code
= (u32
*)&mips_cps_core_entry
;
167 uasm_i_addiu(&entry_code
, 16, 0, cca
);
168 blast_dcache_range((unsigned long)&mips_cps_core_entry
,
169 (unsigned long)entry_code
);
170 bc_wback_inv((unsigned long)&mips_cps_core_entry
,
171 (void *)entry_code
- (void *)&mips_cps_core_entry
);
174 /* Allocate core boot configuration structs */
175 ncores
= mips_cps_numcores(0);
176 mips_cps_core_bootcfg
= kcalloc(ncores
, sizeof(*mips_cps_core_bootcfg
),
178 if (!mips_cps_core_bootcfg
) {
179 pr_err("Failed to allocate boot config for %u cores\n", ncores
);
183 /* Allocate VPE boot configuration structs */
184 for (c
= 0; c
< ncores
; c
++) {
185 core_vpes
= core_vpe_count(0, c
);
186 mips_cps_core_bootcfg
[c
].vpe_config
= kcalloc(core_vpes
,
187 sizeof(*mips_cps_core_bootcfg
[c
].vpe_config
),
189 if (!mips_cps_core_bootcfg
[c
].vpe_config
) {
190 pr_err("Failed to allocate %u VPE boot configs\n",
196 /* Mark this CPU as booted */
197 atomic_set(&mips_cps_core_bootcfg
[cpu_core(¤t_cpu_data
)].vpe_mask
,
198 1 << cpu_vpe_id(¤t_cpu_data
));
202 /* Clean up allocations */
203 if (mips_cps_core_bootcfg
) {
204 for (c
= 0; c
< ncores
; c
++)
205 kfree(mips_cps_core_bootcfg
[c
].vpe_config
);
206 kfree(mips_cps_core_bootcfg
);
207 mips_cps_core_bootcfg
= NULL
;
210 /* Effectively disable SMP by declaring CPUs not present */
211 for_each_possible_cpu(c
) {
214 set_cpu_present(c
, false);
218 static void boot_core(unsigned int core
, unsigned int vpe_id
)
223 /* Select the appropriate core */
224 mips_cm_lock_other(0, core
, 0, CM_GCR_Cx_OTHER_BLOCK_LOCAL
);
226 /* Set its reset vector */
227 write_gcr_co_reset_base(CKSEG1ADDR((unsigned long)mips_cps_core_entry
));
229 /* Ensure its coherency is disabled */
230 write_gcr_co_coherence(0);
232 /* Start it with the legacy memory map and exception base */
233 write_gcr_co_reset_ext_base(CM_GCR_Cx_RESET_EXT_BASE_UEB
);
235 /* Ensure the core can access the GCRs */
236 set_gcr_access(1 << core
);
238 if (mips_cpc_present()) {
240 mips_cpc_lock_other(core
);
242 if (mips_cm_revision() >= CM_REV_CM3
) {
243 /* Run only the requested VP following the reset */
244 write_cpc_co_vp_stop(0xf);
245 write_cpc_co_vp_run(1 << vpe_id
);
248 * Ensure that the VP_RUN register is written before the
254 write_cpc_co_cmd(CPC_Cx_CMD_RESET
);
258 stat
= read_cpc_co_stat_conf();
259 seq_state
= stat
& CPC_Cx_STAT_CONF_SEQSTATE
;
260 seq_state
>>= __ffs(CPC_Cx_STAT_CONF_SEQSTATE
);
262 /* U6 == coherent execution, ie. the core is up */
263 if (seq_state
== CPC_Cx_STAT_CONF_SEQSTATE_U6
)
266 /* Delay a little while before we start warning */
273 pr_warn("Waiting for core %u to start... STAT_CONF=0x%x\n",
278 mips_cpc_unlock_other();
280 /* Take the core out of reset */
281 write_gcr_co_reset_release(0);
284 mips_cm_unlock_other();
286 /* The core is now powered up */
287 bitmap_set(core_power
, core
, 1);
290 static void remote_vpe_boot(void *dummy
)
292 unsigned core
= cpu_core(¤t_cpu_data
);
293 struct core_boot_config
*core_cfg
= &mips_cps_core_bootcfg
[core
];
295 mips_cps_boot_vpes(core_cfg
, cpu_vpe_id(¤t_cpu_data
));
298 static int cps_boot_secondary(int cpu
, struct task_struct
*idle
)
300 unsigned core
= cpu_core(&cpu_data
[cpu
]);
301 unsigned vpe_id
= cpu_vpe_id(&cpu_data
[cpu
]);
302 struct core_boot_config
*core_cfg
= &mips_cps_core_bootcfg
[core
];
303 struct vpe_boot_config
*vpe_cfg
= &core_cfg
->vpe_config
[vpe_id
];
304 unsigned long core_entry
;
308 /* We don't yet support booting CPUs in other clusters */
309 if (cpu_cluster(&cpu_data
[cpu
]) != cpu_cluster(&raw_current_cpu_data
))
312 vpe_cfg
->pc
= (unsigned long)&smp_bootstrap
;
313 vpe_cfg
->sp
= __KSTK_TOS(idle
);
314 vpe_cfg
->gp
= (unsigned long)task_thread_info(idle
);
316 atomic_or(1 << cpu_vpe_id(&cpu_data
[cpu
]), &core_cfg
->vpe_mask
);
320 if (!test_bit(core
, core_power
)) {
321 /* Boot a VPE on a powered down core */
322 boot_core(core
, vpe_id
);
327 mips_cm_lock_other(0, core
, vpe_id
, CM_GCR_Cx_OTHER_BLOCK_LOCAL
);
328 core_entry
= CKSEG1ADDR((unsigned long)mips_cps_core_entry
);
329 write_gcr_co_reset_base(core_entry
);
330 mips_cm_unlock_other();
333 if (!cpus_are_siblings(cpu
, smp_processor_id())) {
334 /* Boot a VPE on another powered up core */
335 for (remote
= 0; remote
< NR_CPUS
; remote
++) {
336 if (!cpus_are_siblings(cpu
, remote
))
338 if (cpu_online(remote
))
341 if (remote
>= NR_CPUS
) {
342 pr_crit("No online CPU in core %u to start CPU%d\n",
347 err
= smp_call_function_single(remote
, remote_vpe_boot
,
350 panic("Failed to call remote CPU\n");
354 BUG_ON(!cpu_has_mipsmt
&& !cpu_has_vp
);
356 /* Boot a VPE on this core */
357 mips_cps_boot_vpes(core_cfg
, vpe_id
);
363 static void cps_init_secondary(void)
365 /* Disable MT - we only want to run 1 TC per VPE */
369 if (mips_cm_revision() >= CM_REV_CM3
) {
370 unsigned int ident
= read_gic_vl_ident();
373 * Ensure that our calculation of the VP ID matches up with
374 * what the GIC reports, otherwise we'll have configured
375 * interrupts incorrectly.
377 BUG_ON(ident
!= mips_cm_vp_id(smp_processor_id()));
381 clear_c0_status(ST0_IM
);
383 change_c0_status(ST0_IM
, STATUSF_IP2
| STATUSF_IP3
|
384 STATUSF_IP4
| STATUSF_IP5
|
385 STATUSF_IP6
| STATUSF_IP7
);
388 static void cps_smp_finish(void)
390 write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency
/ HZ
));
392 #ifdef CONFIG_MIPS_MT_FPAFF
393 /* If we have an FPU, enroll ourselves in the FPU-full mask */
395 cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask
);
396 #endif /* CONFIG_MIPS_MT_FPAFF */
401 #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_KEXEC)
408 static void cps_shutdown_this_cpu(enum cpu_death death
)
410 unsigned int cpu
, core
, vpe_id
;
412 cpu
= smp_processor_id();
413 core
= cpu_core(&cpu_data
[cpu
]);
415 if (death
== CPU_DEATH_HALT
) {
416 vpe_id
= cpu_vpe_id(&cpu_data
[cpu
]);
418 pr_debug("Halting core %d VP%d\n", core
, vpe_id
);
419 if (cpu_has_mipsmt
) {
421 write_c0_tchalt(TCHALT_H
);
422 instruction_hazard();
423 } else if (cpu_has_vp
) {
424 write_cpc_cl_vp_stop(1 << vpe_id
);
426 /* Ensure that the VP_STOP register is written */
430 pr_debug("Gating power to core %d\n", core
);
431 /* Power down the core */
432 cps_pm_enter_state(CPS_PM_POWER_GATED
);
438 static void cps_kexec_nonboot_cpu(void)
440 if (cpu_has_mipsmt
|| cpu_has_vp
)
441 cps_shutdown_this_cpu(CPU_DEATH_HALT
);
443 cps_shutdown_this_cpu(CPU_DEATH_POWER
);
446 #endif /* CONFIG_KEXEC */
448 #endif /* CONFIG_HOTPLUG_CPU || CONFIG_KEXEC */
450 #ifdef CONFIG_HOTPLUG_CPU
452 static int cps_cpu_disable(void)
454 unsigned cpu
= smp_processor_id();
455 struct core_boot_config
*core_cfg
;
460 if (!cps_pm_support_state(CPS_PM_POWER_GATED
))
463 core_cfg
= &mips_cps_core_bootcfg
[cpu_core(¤t_cpu_data
)];
464 atomic_sub(1 << cpu_vpe_id(¤t_cpu_data
), &core_cfg
->vpe_mask
);
465 smp_mb__after_atomic();
466 set_cpu_online(cpu
, false);
467 calculate_cpu_foreign_map();
472 static unsigned cpu_death_sibling
;
473 static enum cpu_death cpu_death
;
481 cpu
= smp_processor_id();
482 cpu_death
= CPU_DEATH_POWER
;
484 pr_debug("CPU%d going offline\n", cpu
);
486 if (cpu_has_mipsmt
|| cpu_has_vp
) {
487 /* Look for another online VPE within the core */
488 for_each_online_cpu(cpu_death_sibling
) {
489 if (!cpus_are_siblings(cpu
, cpu_death_sibling
))
493 * There is an online VPE within the core. Just halt
494 * this TC and leave the core alone.
496 cpu_death
= CPU_DEATH_HALT
;
501 /* This CPU has chosen its way out */
502 (void)cpu_report_death();
504 cps_shutdown_this_cpu(cpu_death
);
506 /* This should never be reached */
507 panic("Failed to offline CPU %u", cpu
);
510 static void wait_for_sibling_halt(void *ptr_cpu
)
512 unsigned cpu
= (unsigned long)ptr_cpu
;
513 unsigned vpe_id
= cpu_vpe_id(&cpu_data
[cpu
]);
518 local_irq_save(flags
);
520 halted
= read_tc_c0_tchalt();
521 local_irq_restore(flags
);
522 } while (!(halted
& TCHALT_H
));
525 static void cps_cpu_die(unsigned int cpu
)
527 unsigned core
= cpu_core(&cpu_data
[cpu
]);
528 unsigned int vpe_id
= cpu_vpe_id(&cpu_data
[cpu
]);
533 /* Wait for the cpu to choose its way out */
534 if (!cpu_wait_death(cpu
, 5)) {
535 pr_err("CPU%u: didn't offline\n", cpu
);
540 * Now wait for the CPU to actually offline. Without doing this that
541 * offlining may race with one or more of:
543 * - Onlining the CPU again.
544 * - Powering down the core if another VPE within it is offlined.
545 * - A sibling VPE entering a non-coherent state.
547 * In the non-MT halt case (ie. infinite loop) the CPU is doing nothing
548 * with which we could race, so do nothing.
550 if (cpu_death
== CPU_DEATH_POWER
) {
552 * Wait for the core to enter a powered down or clock gated
553 * state, the latter happening when a JTAG probe is connected
554 * in which case the CPC will refuse to power down the core.
556 fail_time
= ktime_add_ms(ktime_get(), 2000);
558 mips_cm_lock_other(0, core
, 0, CM_GCR_Cx_OTHER_BLOCK_LOCAL
);
559 mips_cpc_lock_other(core
);
560 stat
= read_cpc_co_stat_conf();
561 stat
&= CPC_Cx_STAT_CONF_SEQSTATE
;
562 stat
>>= __ffs(CPC_Cx_STAT_CONF_SEQSTATE
);
563 mips_cpc_unlock_other();
564 mips_cm_unlock_other();
566 if (stat
== CPC_Cx_STAT_CONF_SEQSTATE_D0
||
567 stat
== CPC_Cx_STAT_CONF_SEQSTATE_D2
||
568 stat
== CPC_Cx_STAT_CONF_SEQSTATE_U2
)
572 * The core ought to have powered down, but didn't &
573 * now we don't really know what state it's in. It's
574 * likely that its _pwr_up pin has been wired to logic
575 * 1 & it powered back up as soon as we powered it
578 * The best we can do is warn the user & continue in
579 * the hope that the core is doing nothing harmful &
580 * might behave properly if we online it later.
582 if (WARN(ktime_after(ktime_get(), fail_time
),
583 "CPU%u hasn't powered down, seq. state %u\n",
588 /* Indicate the core is powered off */
589 bitmap_clear(core_power
, core
, 1);
590 } else if (cpu_has_mipsmt
) {
592 * Have a CPU with access to the offlined CPUs registers wait
593 * for its TC to halt.
595 err
= smp_call_function_single(cpu_death_sibling
,
596 wait_for_sibling_halt
,
597 (void *)(unsigned long)cpu
, 1);
599 panic("Failed to call remote sibling CPU\n");
600 } else if (cpu_has_vp
) {
602 mips_cm_lock_other(0, core
, vpe_id
, CM_GCR_Cx_OTHER_BLOCK_LOCAL
);
603 stat
= read_cpc_co_vp_running();
604 mips_cm_unlock_other();
605 } while (stat
& (1 << vpe_id
));
609 #endif /* CONFIG_HOTPLUG_CPU */
611 static const struct plat_smp_ops cps_smp_ops
= {
612 .smp_setup
= cps_smp_setup
,
613 .prepare_cpus
= cps_prepare_cpus
,
614 .boot_secondary
= cps_boot_secondary
,
615 .init_secondary
= cps_init_secondary
,
616 .smp_finish
= cps_smp_finish
,
617 .send_ipi_single
= mips_smp_send_ipi_single
,
618 .send_ipi_mask
= mips_smp_send_ipi_mask
,
619 #ifdef CONFIG_HOTPLUG_CPU
620 .cpu_disable
= cps_cpu_disable
,
621 .cpu_die
= cps_cpu_die
,
624 .kexec_nonboot_cpu
= cps_kexec_nonboot_cpu
,
628 bool mips_cps_smp_in_use(void)
630 extern const struct plat_smp_ops
*mp_ops
;
631 return mp_ops
== &cps_smp_ops
;
634 int register_cps_smp_ops(void)
636 if (!mips_cm_present()) {
637 pr_warn("MIPS CPS SMP unable to proceed without a CM\n");
641 /* check we have a GIC - we need one for IPIs */
642 if (!(read_gcr_gic_status() & CM_GCR_GIC_STATUS_EX
)) {
643 pr_warn("MIPS CPS SMP unable to proceed without a GIC\n");
647 register_smp_ops(&cps_smp_ops
);