?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
usb: xhci-plat: properly handle probe deferral for devm_clk_get()
[linux/fpc-iii.git] / drivers / rtc / rtc-ds1307.c
blobecb7dbae9be9daa0ee96ede34a446a78e8e7debd
1 /*
2 * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
3 *
4 * Copyright (C) 2005 James Chapman (ds1337 core)
5 * Copyright (C) 2006 David Brownell
6 * Copyright (C) 2009 Matthias Fuchs (rx8025 support)
7 * Copyright (C) 2012 Bertrand Achard (nvram access fixes)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14 #include <linux/bcd.h>
15 #include <linux/i2c.h>
16 #include <linux/init.h>
17 #include <linux/module.h>
18 #include <linux/rtc/ds1307.h>
19 #include <linux/rtc.h>
20 #include <linux/slab.h>
21 #include <linux/string.h>
22 #include <linux/hwmon.h>
23 #include <linux/hwmon-sysfs.h>
24 #include <linux/clk-provider.h>
25
26 /*
27 * We can't determine type by probing, but if we expect pre-Linux code
28 * to have set the chip up as a clock (turning on the oscillator and
29 * setting the date and time), Linux can ignore the non-clock features.
30 * That's a natural job for a factory or repair bench.
31 */
32 enum ds_type {
33 ds_1307,
34 ds_1337,
35 ds_1338,
36 ds_1339,
37 ds_1340,
38 ds_1388,
39 ds_3231,
40 m41t00,
41 mcp794xx,
42 rx_8025,
43 last_ds_type /* always last */
44 /* rs5c372 too? different address... */
45 };
46
47
48 /* RTC registers don't differ much, except for the century flag */
49 #define DS1307_REG_SECS 0x00 /* 00-59 */
50 # define DS1307_BIT_CH 0x80
51 # define DS1340_BIT_nEOSC 0x80
52 # define MCP794XX_BIT_ST 0x80
53 #define DS1307_REG_MIN 0x01 /* 00-59 */
54 #define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
55 # define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
56 # define DS1307_BIT_PM 0x20 /* in REG_HOUR */
57 # define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
58 # define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
59 #define DS1307_REG_WDAY 0x03 /* 01-07 */
60 # define MCP794XX_BIT_VBATEN 0x08
61 #define DS1307_REG_MDAY 0x04 /* 01-31 */
62 #define DS1307_REG_MONTH 0x05 /* 01-12 */
63 # define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
64 #define DS1307_REG_YEAR 0x06 /* 00-99 */
65
66 /*
67 * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
68 * start at 7, and they differ a LOT. Only control and status matter for
69 * basic RTC date and time functionality; be careful using them.
70 */
71 #define DS1307_REG_CONTROL 0x07 /* or ds1338 */
72 # define DS1307_BIT_OUT 0x80
73 # define DS1338_BIT_OSF 0x20
74 # define DS1307_BIT_SQWE 0x10
75 # define DS1307_BIT_RS1 0x02
76 # define DS1307_BIT_RS0 0x01
77 #define DS1337_REG_CONTROL 0x0e
78 # define DS1337_BIT_nEOSC 0x80
79 # define DS1339_BIT_BBSQI 0x20
80 # define DS3231_BIT_BBSQW 0x40 /* same as BBSQI */
81 # define DS1337_BIT_RS2 0x10
82 # define DS1337_BIT_RS1 0x08
83 # define DS1337_BIT_INTCN 0x04
84 # define DS1337_BIT_A2IE 0x02
85 # define DS1337_BIT_A1IE 0x01
86 #define DS1340_REG_CONTROL 0x07
87 # define DS1340_BIT_OUT 0x80
88 # define DS1340_BIT_FT 0x40
89 # define DS1340_BIT_CALIB_SIGN 0x20
90 # define DS1340_M_CALIBRATION 0x1f
91 #define DS1340_REG_FLAG 0x09
92 # define DS1340_BIT_OSF 0x80
93 #define DS1337_REG_STATUS 0x0f
94 # define DS1337_BIT_OSF 0x80
95 # define DS3231_BIT_EN32KHZ 0x08
96 # define DS1337_BIT_A2I 0x02
97 # define DS1337_BIT_A1I 0x01
98 #define DS1339_REG_ALARM1_SECS 0x07
99
100 #define DS13XX_TRICKLE_CHARGER_MAGIC 0xa0
101
102 #define RX8025_REG_CTRL1 0x0e
103 # define RX8025_BIT_2412 0x20
104 #define RX8025_REG_CTRL2 0x0f
105 # define RX8025_BIT_PON 0x10
106 # define RX8025_BIT_VDET 0x40
107 # define RX8025_BIT_XST 0x20
108
109
110 struct ds1307 {
111 u8 offset; /* register's offset */
112 u8 regs[11];
113 u16 nvram_offset;
114 struct bin_attribute *nvram;
115 enum ds_type type;
116 unsigned long flags;
117 #define HAS_NVRAM 0 /* bit 0 == sysfs file active */
118 #define HAS_ALARM 1 /* bit 1 == irq claimed */
119 struct i2c_client *client;
120 struct rtc_device *rtc;
121 s32 (*read_block_data)(const struct i2c_client *client, u8 command,
122 u8 length, u8 *values);
123 s32 (*write_block_data)(const struct i2c_client *client, u8 command,
124 u8 length, const u8 *values);
125 #ifdef CONFIG_COMMON_CLK
126 struct clk_hw clks[2];
127 #endif
128 };
129
130 struct chip_desc {
131 unsigned alarm:1;
132 u16 nvram_offset;
133 u16 nvram_size;
134 u16 trickle_charger_reg;
135 u8 trickle_charger_setup;
136 u8 (*do_trickle_setup)(struct i2c_client *, uint32_t, bool);
137 };
138
139 static u8 do_trickle_setup_ds1339(struct i2c_client *,
140 uint32_t ohms, bool diode);
141
142 static struct chip_desc chips[last_ds_type] = {
143 [ds_1307] = {
144 .nvram_offset = 8,
145 .nvram_size = 56,
146 },
147 [ds_1337] = {
148 .alarm = 1,
149 },
150 [ds_1338] = {
151 .nvram_offset = 8,
152 .nvram_size = 56,
153 },
154 [ds_1339] = {
155 .alarm = 1,
156 .trickle_charger_reg = 0x10,
157 .do_trickle_setup = &do_trickle_setup_ds1339,
158 },
159 [ds_1340] = {
160 .trickle_charger_reg = 0x08,
161 },
162 [ds_1388] = {
163 .trickle_charger_reg = 0x0a,
164 },
165 [ds_3231] = {
166 .alarm = 1,
167 },
168 [mcp794xx] = {
169 .alarm = 1,
170 /* this is battery backed SRAM */
171 .nvram_offset = 0x20,
172 .nvram_size = 0x40,
173 },
174 };
175
176 static const struct i2c_device_id ds1307_id[] = {
177 { "ds1307", ds_1307 },
178 { "ds1337", ds_1337 },
179 { "ds1338", ds_1338 },
180 { "ds1339", ds_1339 },
181 { "ds1388", ds_1388 },
182 { "ds1340", ds_1340 },
183 { "ds3231", ds_3231 },
184 { "m41t00", m41t00 },
185 { "mcp7940x", mcp794xx },
186 { "mcp7941x", mcp794xx },
187 { "pt7c4338", ds_1307 },
188 { "rx8025", rx_8025 },
189 { }
190 };
191 MODULE_DEVICE_TABLE(i2c, ds1307_id);
192
193 /*----------------------------------------------------------------------*/
194
195 #define BLOCK_DATA_MAX_TRIES 10
196
197 static s32 ds1307_read_block_data_once(const struct i2c_client *client,
198 u8 command, u8 length, u8 *values)
199 {
200 s32 i, data;
201
202 for (i = 0; i < length; i++) {
203 data = i2c_smbus_read_byte_data(client, command + i);
204 if (data < 0)
205 return data;
206 values[i] = data;
207 }
208 return i;
209 }
210
211 static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command,
212 u8 length, u8 *values)
213 {
214 u8 oldvalues[255];
215 s32 ret;
216 int tries = 0;
217
218 dev_dbg(&client->dev, "ds1307_read_block_data (length=%d)\n", length);
219 ret = ds1307_read_block_data_once(client, command, length, values);
220 if (ret < 0)
221 return ret;
222 do {
223 if (++tries > BLOCK_DATA_MAX_TRIES) {
224 dev_err(&client->dev,
225 "ds1307_read_block_data failed\n");
226 return -EIO;
227 }
228 memcpy(oldvalues, values, length);
229 ret = ds1307_read_block_data_once(client, command, length,
230 values);
231 if (ret < 0)
232 return ret;
233 } while (memcmp(oldvalues, values, length));
234 return length;
235 }
236
237 static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command,
238 u8 length, const u8 *values)
239 {
240 u8 currvalues[255];
241 int tries = 0;
242
243 dev_dbg(&client->dev, "ds1307_write_block_data (length=%d)\n", length);
244 do {
245 s32 i, ret;
246
247 if (++tries > BLOCK_DATA_MAX_TRIES) {
248 dev_err(&client->dev,
249 "ds1307_write_block_data failed\n");
250 return -EIO;
251 }
252 for (i = 0; i < length; i++) {
253 ret = i2c_smbus_write_byte_data(client, command + i,
254 values[i]);
255 if (ret < 0)
256 return ret;
257 }
258 ret = ds1307_read_block_data_once(client, command, length,
259 currvalues);
260 if (ret < 0)
261 return ret;
262 } while (memcmp(currvalues, values, length));
263 return length;
264 }
265
266 /*----------------------------------------------------------------------*/
267
268 /* These RTC devices are not designed to be connected to a SMbus adapter.
269 SMbus limits block operations length to 32 bytes, whereas it's not
270 limited on I2C buses. As a result, accesses may exceed 32 bytes;
271 in that case, split them into smaller blocks */
272
273 static s32 ds1307_native_smbus_write_block_data(const struct i2c_client *client,
274 u8 command, u8 length, const u8 *values)
275 {
276 u8 suboffset = 0;
277
278 if (length <= I2C_SMBUS_BLOCK_MAX)
279 return i2c_smbus_write_i2c_block_data(client,
280 command, length, values);
281
282 while (suboffset < length) {
283 s32 retval = i2c_smbus_write_i2c_block_data(client,
284 command + suboffset,
285 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
286 values + suboffset);
287 if (retval < 0)
288 return retval;
289
290 suboffset += I2C_SMBUS_BLOCK_MAX;
291 }
292 return length;
293 }
294
295 static s32 ds1307_native_smbus_read_block_data(const struct i2c_client *client,
296 u8 command, u8 length, u8 *values)
297 {
298 u8 suboffset = 0;
299
300 if (length <= I2C_SMBUS_BLOCK_MAX)
301 return i2c_smbus_read_i2c_block_data(client,
302 command, length, values);
303
304 while (suboffset < length) {
305 s32 retval = i2c_smbus_read_i2c_block_data(client,
306 command + suboffset,
307 min(I2C_SMBUS_BLOCK_MAX, length - suboffset),
308 values + suboffset);
309 if (retval < 0)
310 return retval;
311
312 suboffset += I2C_SMBUS_BLOCK_MAX;
313 }
314 return length;
315 }
316
317 /*----------------------------------------------------------------------*/
318
319 /*
320 * The ds1337 and ds1339 both have two alarms, but we only use the first
321 * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
322 * signal; ds1339 chips have only one alarm signal.
323 */
324 static irqreturn_t ds1307_irq(int irq, void *dev_id)
325 {
326 struct i2c_client *client = dev_id;
327 struct ds1307 *ds1307 = i2c_get_clientdata(client);
328 struct mutex *lock = &ds1307->rtc->ops_lock;
329 int stat, control;
330
331 mutex_lock(lock);
332 stat = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
333 if (stat < 0)
334 goto out;
335
336 if (stat & DS1337_BIT_A1I) {
337 stat &= ~DS1337_BIT_A1I;
338 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, stat);
339
340 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
341 if (control < 0)
342 goto out;
343
344 control &= ~DS1337_BIT_A1IE;
345 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
346
347 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
348 }
349
350 out:
351 mutex_unlock(lock);
352
353 return IRQ_HANDLED;
354 }
355
356 /*----------------------------------------------------------------------*/
357
358 static int ds1307_get_time(struct device *dev, struct rtc_time *t)
359 {
360 struct ds1307 *ds1307 = dev_get_drvdata(dev);
361 int tmp;
362
363 /* read the RTC date and time registers all at once */
364 tmp = ds1307->read_block_data(ds1307->client,
365 ds1307->offset, 7, ds1307->regs);
366 if (tmp != 7) {
367 dev_err(dev, "%s error %d\n", "read", tmp);
368 return -EIO;
369 }
370
371 dev_dbg(dev, "%s: %7ph\n", "read", ds1307->regs);
372
373 t->tm_sec = bcd2bin(ds1307->regs[DS1307_REG_SECS] & 0x7f);
374 t->tm_min = bcd2bin(ds1307->regs[DS1307_REG_MIN] & 0x7f);
375 tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
376 t->tm_hour = bcd2bin(tmp);
377 t->tm_wday = bcd2bin(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
378 t->tm_mday = bcd2bin(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
379 tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
380 t->tm_mon = bcd2bin(tmp) - 1;
381
382 /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */
383 t->tm_year = bcd2bin(ds1307->regs[DS1307_REG_YEAR]) + 100;
384
385 dev_dbg(dev, "%s secs=%d, mins=%d, "
386 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
387 "read", t->tm_sec, t->tm_min,
388 t->tm_hour, t->tm_mday,
389 t->tm_mon, t->tm_year, t->tm_wday);
390
391 /* initial clock setting can be undefined */
392 return rtc_valid_tm(t);
393 }
394
395 static int ds1307_set_time(struct device *dev, struct rtc_time *t)
396 {
397 struct ds1307 *ds1307 = dev_get_drvdata(dev);
398 int result;
399 int tmp;
400 u8 *buf = ds1307->regs;
401
402 dev_dbg(dev, "%s secs=%d, mins=%d, "
403 "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
404 "write", t->tm_sec, t->tm_min,
405 t->tm_hour, t->tm_mday,
406 t->tm_mon, t->tm_year, t->tm_wday);
407
408 buf[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
409 buf[DS1307_REG_MIN] = bin2bcd(t->tm_min);
410 buf[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
411 buf[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
412 buf[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
413 buf[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
414
415 /* assume 20YY not 19YY */
416 tmp = t->tm_year - 100;
417 buf[DS1307_REG_YEAR] = bin2bcd(tmp);
418
419 switch (ds1307->type) {
420 case ds_1337:
421 case ds_1339:
422 case ds_3231:
423 buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
424 break;
425 case ds_1340:
426 buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN
427 | DS1340_BIT_CENTURY;
428 break;
429 case mcp794xx:
430 /*
431 * these bits were cleared when preparing the date/time
432 * values and need to be set again before writing the
433 * buffer out to the device.
434 */
435 buf[DS1307_REG_SECS] |= MCP794XX_BIT_ST;
436 buf[DS1307_REG_WDAY] |= MCP794XX_BIT_VBATEN;
437 break;
438 default:
439 break;
440 }
441
442 dev_dbg(dev, "%s: %7ph\n", "write", buf);
443
444 result = ds1307->write_block_data(ds1307->client,
445 ds1307->offset, 7, buf);
446 if (result < 0) {
447 dev_err(dev, "%s error %d\n", "write", result);
448 return result;
449 }
450 return 0;
451 }
452
453 static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
454 {
455 struct i2c_client *client = to_i2c_client(dev);
456 struct ds1307 *ds1307 = i2c_get_clientdata(client);
457 int ret;
458
459 if (!test_bit(HAS_ALARM, &ds1307->flags))
460 return -EINVAL;
461
462 /* read all ALARM1, ALARM2, and status registers at once */
463 ret = ds1307->read_block_data(client,
464 DS1339_REG_ALARM1_SECS, 9, ds1307->regs);
465 if (ret != 9) {
466 dev_err(dev, "%s error %d\n", "alarm read", ret);
467 return -EIO;
468 }
469
470 dev_dbg(dev, "%s: %4ph, %3ph, %2ph\n", "alarm read",
471 &ds1307->regs[0], &ds1307->regs[4], &ds1307->regs[7]);
472
473 /*
474 * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
475 * and that all four fields are checked matches
476 */
477 t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
478 t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f);
479 t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f);
480 t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f);
481 t->time.tm_mon = -1;
482 t->time.tm_year = -1;
483 t->time.tm_wday = -1;
484 t->time.tm_yday = -1;
485 t->time.tm_isdst = -1;
486
487 /* ... and status */
488 t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE);
489 t->pending = !!(ds1307->regs[8] & DS1337_BIT_A1I);
490
491 dev_dbg(dev, "%s secs=%d, mins=%d, "
492 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
493 "alarm read", t->time.tm_sec, t->time.tm_min,
494 t->time.tm_hour, t->time.tm_mday,
495 t->enabled, t->pending);
496
497 return 0;
498 }
499
500 static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
501 {
502 struct i2c_client *client = to_i2c_client(dev);
503 struct ds1307 *ds1307 = i2c_get_clientdata(client);
504 unsigned char *buf = ds1307->regs;
505 u8 control, status;
506 int ret;
507
508 if (!test_bit(HAS_ALARM, &ds1307->flags))
509 return -EINVAL;
510
511 dev_dbg(dev, "%s secs=%d, mins=%d, "
512 "hours=%d, mday=%d, enabled=%d, pending=%d\n",
513 "alarm set", t->time.tm_sec, t->time.tm_min,
514 t->time.tm_hour, t->time.tm_mday,
515 t->enabled, t->pending);
516
517 /* read current status of both alarms and the chip */
518 ret = ds1307->read_block_data(client,
519 DS1339_REG_ALARM1_SECS, 9, buf);
520 if (ret != 9) {
521 dev_err(dev, "%s error %d\n", "alarm write", ret);
522 return -EIO;
523 }
524 control = ds1307->regs[7];
525 status = ds1307->regs[8];
526
527 dev_dbg(dev, "%s: %4ph, %3ph, %02x %02x\n", "alarm set (old status)",
528 &ds1307->regs[0], &ds1307->regs[4], control, status);
529
530 /* set ALARM1, using 24 hour and day-of-month modes */
531 buf[0] = bin2bcd(t->time.tm_sec);
532 buf[1] = bin2bcd(t->time.tm_min);
533 buf[2] = bin2bcd(t->time.tm_hour);
534 buf[3] = bin2bcd(t->time.tm_mday);
535
536 /* set ALARM2 to non-garbage */
537 buf[4] = 0;
538 buf[5] = 0;
539 buf[6] = 0;
540
541 /* optionally enable ALARM1 */
542 buf[7] = control & ~(DS1337_BIT_A1IE | DS1337_BIT_A2IE);
543 if (t->enabled) {
544 dev_dbg(dev, "alarm IRQ armed\n");
545 buf[7] |= DS1337_BIT_A1IE; /* only ALARM1 is used */
546 }
547 buf[8] = status & ~(DS1337_BIT_A1I | DS1337_BIT_A2I);
548
549 ret = ds1307->write_block_data(client,
550 DS1339_REG_ALARM1_SECS, 9, buf);
551 if (ret < 0) {
552 dev_err(dev, "can't set alarm time\n");
553 return ret;
554 }
555
556 return 0;
557 }
558
559 static int ds1307_alarm_irq_enable(struct device *dev, unsigned int enabled)
560 {
561 struct i2c_client *client = to_i2c_client(dev);
562 struct ds1307 *ds1307 = i2c_get_clientdata(client);
563 int ret;
564
565 if (!test_bit(HAS_ALARM, &ds1307->flags))
566 return -ENOTTY;
567
568 ret = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
569 if (ret < 0)
570 return ret;
571
572 if (enabled)
573 ret |= DS1337_BIT_A1IE;
574 else
575 ret &= ~DS1337_BIT_A1IE;
576
577 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, ret);
578 if (ret < 0)
579 return ret;
580
581 return 0;
582 }
583
584 static const struct rtc_class_ops ds13xx_rtc_ops = {
585 .read_time = ds1307_get_time,
586 .set_time = ds1307_set_time,
587 .read_alarm = ds1337_read_alarm,
588 .set_alarm = ds1337_set_alarm,
589 .alarm_irq_enable = ds1307_alarm_irq_enable,
590 };
591
592 /*----------------------------------------------------------------------*/
593
594 /*
595 * Alarm support for mcp794xx devices.
596 */
597
598 #define MCP794XX_REG_CONTROL 0x07
599 # define MCP794XX_BIT_ALM0_EN 0x10
600 # define MCP794XX_BIT_ALM1_EN 0x20
601 #define MCP794XX_REG_ALARM0_BASE 0x0a
602 #define MCP794XX_REG_ALARM0_CTRL 0x0d
603 #define MCP794XX_REG_ALARM1_BASE 0x11
604 #define MCP794XX_REG_ALARM1_CTRL 0x14
605 # define MCP794XX_BIT_ALMX_IF (1 << 3)
606 # define MCP794XX_BIT_ALMX_C0 (1 << 4)
607 # define MCP794XX_BIT_ALMX_C1 (1 << 5)
608 # define MCP794XX_BIT_ALMX_C2 (1 << 6)
609 # define MCP794XX_BIT_ALMX_POL (1 << 7)
610 # define MCP794XX_MSK_ALMX_MATCH (MCP794XX_BIT_ALMX_C0 | \
611 MCP794XX_BIT_ALMX_C1 | \
612 MCP794XX_BIT_ALMX_C2)
613
614 static irqreturn_t mcp794xx_irq(int irq, void *dev_id)
615 {
616 struct i2c_client *client = dev_id;
617 struct ds1307 *ds1307 = i2c_get_clientdata(client);
618 struct mutex *lock = &ds1307->rtc->ops_lock;
619 int reg, ret;
620
621 mutex_lock(lock);
622
623 /* Check and clear alarm 0 interrupt flag. */
624 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_ALARM0_CTRL);
625 if (reg < 0)
626 goto out;
627 if (!(reg & MCP794XX_BIT_ALMX_IF))
628 goto out;
629 reg &= ~MCP794XX_BIT_ALMX_IF;
630 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_ALARM0_CTRL, reg);
631 if (ret < 0)
632 goto out;
633
634 /* Disable alarm 0. */
635 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
636 if (reg < 0)
637 goto out;
638 reg &= ~MCP794XX_BIT_ALM0_EN;
639 ret = i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
640 if (ret < 0)
641 goto out;
642
643 rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
644
645 out:
646 mutex_unlock(lock);
647
648 return IRQ_HANDLED;
649 }
650
651 static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t)
652 {
653 struct i2c_client *client = to_i2c_client(dev);
654 struct ds1307 *ds1307 = i2c_get_clientdata(client);
655 u8 *regs = ds1307->regs;
656 int ret;
657
658 if (!test_bit(HAS_ALARM, &ds1307->flags))
659 return -EINVAL;
660
661 /* Read control and alarm 0 registers. */
662 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
663 if (ret < 0)
664 return ret;
665
666 t->enabled = !!(regs[0] & MCP794XX_BIT_ALM0_EN);
667
668 /* Report alarm 0 time assuming 24-hour and day-of-month modes. */
669 t->time.tm_sec = bcd2bin(ds1307->regs[3] & 0x7f);
670 t->time.tm_min = bcd2bin(ds1307->regs[4] & 0x7f);
671 t->time.tm_hour = bcd2bin(ds1307->regs[5] & 0x3f);
672 t->time.tm_wday = bcd2bin(ds1307->regs[6] & 0x7) - 1;
673 t->time.tm_mday = bcd2bin(ds1307->regs[7] & 0x3f);
674 t->time.tm_mon = bcd2bin(ds1307->regs[8] & 0x1f) - 1;
675 t->time.tm_year = -1;
676 t->time.tm_yday = -1;
677 t->time.tm_isdst = -1;
678
679 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
680 "enabled=%d polarity=%d irq=%d match=%d\n", __func__,
681 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
682 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled,
683 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_POL),
684 !!(ds1307->regs[6] & MCP794XX_BIT_ALMX_IF),
685 (ds1307->regs[6] & MCP794XX_MSK_ALMX_MATCH) >> 4);
686
687 return 0;
688 }
689
690 static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t)
691 {
692 struct i2c_client *client = to_i2c_client(dev);
693 struct ds1307 *ds1307 = i2c_get_clientdata(client);
694 unsigned char *regs = ds1307->regs;
695 int ret;
696
697 if (!test_bit(HAS_ALARM, &ds1307->flags))
698 return -EINVAL;
699
700 dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
701 "enabled=%d pending=%d\n", __func__,
702 t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
703 t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
704 t->enabled, t->pending);
705
706 /* Read control and alarm 0 registers. */
707 ret = ds1307->read_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
708 if (ret < 0)
709 return ret;
710
711 /* Set alarm 0, using 24-hour and day-of-month modes. */
712 regs[3] = bin2bcd(t->time.tm_sec);
713 regs[4] = bin2bcd(t->time.tm_min);
714 regs[5] = bin2bcd(t->time.tm_hour);
715 regs[6] = bin2bcd(t->time.tm_wday + 1);
716 regs[7] = bin2bcd(t->time.tm_mday);
717 regs[8] = bin2bcd(t->time.tm_mon + 1);
718
719 /* Clear the alarm 0 interrupt flag. */
720 regs[6] &= ~MCP794XX_BIT_ALMX_IF;
721 /* Set alarm match: second, minute, hour, day, date, month. */
722 regs[6] |= MCP794XX_MSK_ALMX_MATCH;
723 /* Disable interrupt. We will not enable until completely programmed */
724 regs[0] &= ~MCP794XX_BIT_ALM0_EN;
725
726 ret = ds1307->write_block_data(client, MCP794XX_REG_CONTROL, 10, regs);
727 if (ret < 0)
728 return ret;
729
730 if (!t->enabled)
731 return 0;
732 regs[0] |= MCP794XX_BIT_ALM0_EN;
733 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, regs[0]);
734 }
735
736 static int mcp794xx_alarm_irq_enable(struct device *dev, unsigned int enabled)
737 {
738 struct i2c_client *client = to_i2c_client(dev);
739 struct ds1307 *ds1307 = i2c_get_clientdata(client);
740 int reg;
741
742 if (!test_bit(HAS_ALARM, &ds1307->flags))
743 return -EINVAL;
744
745 reg = i2c_smbus_read_byte_data(client, MCP794XX_REG_CONTROL);
746 if (reg < 0)
747 return reg;
748
749 if (enabled)
750 reg |= MCP794XX_BIT_ALM0_EN;
751 else
752 reg &= ~MCP794XX_BIT_ALM0_EN;
753
754 return i2c_smbus_write_byte_data(client, MCP794XX_REG_CONTROL, reg);
755 }
756
757 static const struct rtc_class_ops mcp794xx_rtc_ops = {
758 .read_time = ds1307_get_time,
759 .set_time = ds1307_set_time,
760 .read_alarm = mcp794xx_read_alarm,
761 .set_alarm = mcp794xx_set_alarm,
762 .alarm_irq_enable = mcp794xx_alarm_irq_enable,
763 };
764
765 /*----------------------------------------------------------------------*/
766
767 static ssize_t
768 ds1307_nvram_read(struct file *filp, struct kobject *kobj,
769 struct bin_attribute *attr,
770 char *buf, loff_t off, size_t count)
771 {
772 struct i2c_client *client;
773 struct ds1307 *ds1307;
774 int result;
775
776 client = kobj_to_i2c_client(kobj);
777 ds1307 = i2c_get_clientdata(client);
778
779 result = ds1307->read_block_data(client, ds1307->nvram_offset + off,
780 count, buf);
781 if (result < 0)
782 dev_err(&client->dev, "%s error %d\n", "nvram read", result);
783 return result;
784 }
785
786 static ssize_t
787 ds1307_nvram_write(struct file *filp, struct kobject *kobj,
788 struct bin_attribute *attr,
789 char *buf, loff_t off, size_t count)
790 {
791 struct i2c_client *client;
792 struct ds1307 *ds1307;
793 int result;
794
795 client = kobj_to_i2c_client(kobj);
796 ds1307 = i2c_get_clientdata(client);
797
798 result = ds1307->write_block_data(client, ds1307->nvram_offset + off,
799 count, buf);
800 if (result < 0) {
801 dev_err(&client->dev, "%s error %d\n", "nvram write", result);
802 return result;
803 }
804 return count;
805 }
806
807
808 /*----------------------------------------------------------------------*/
809
810 static u8 do_trickle_setup_ds1339(struct i2c_client *client,
811 uint32_t ohms, bool diode)
812 {
813 u8 setup = (diode) ? DS1307_TRICKLE_CHARGER_DIODE :
814 DS1307_TRICKLE_CHARGER_NO_DIODE;
815
816 switch (ohms) {
817 case 250:
818 setup |= DS1307_TRICKLE_CHARGER_250_OHM;
819 break;
820 case 2000:
821 setup |= DS1307_TRICKLE_CHARGER_2K_OHM;
822 break;
823 case 4000:
824 setup |= DS1307_TRICKLE_CHARGER_4K_OHM;
825 break;
826 default:
827 dev_warn(&client->dev,
828 "Unsupported ohm value %u in dt\n", ohms);
829 return 0;
830 }
831 return setup;
832 }
833
834 static void ds1307_trickle_of_init(struct i2c_client *client,
835 struct chip_desc *chip)
836 {
837 uint32_t ohms = 0;
838 bool diode = true;
839
840 if (!chip->do_trickle_setup)
841 goto out;
842 if (of_property_read_u32(client->dev.of_node, "trickle-resistor-ohms" , &ohms))
843 goto out;
844 if (of_property_read_bool(client->dev.of_node, "trickle-diode-disable"))
845 diode = false;
846 chip->trickle_charger_setup = chip->do_trickle_setup(client,
847 ohms, diode);
848 out:
849 return;
850 }
851
852 /*----------------------------------------------------------------------*/
853
854 #ifdef CONFIG_RTC_DRV_DS1307_HWMON
855
856 /*
857 * Temperature sensor support for ds3231 devices.
858 */
859
860 #define DS3231_REG_TEMPERATURE 0x11
861
862 /*
863 * A user-initiated temperature conversion is not started by this function,
864 * so the temperature is updated once every 64 seconds.
865 */
866 static int ds3231_hwmon_read_temp(struct device *dev, s32 *mC)
867 {
868 struct ds1307 *ds1307 = dev_get_drvdata(dev);
869 u8 temp_buf[2];
870 s16 temp;
871 int ret;
872
873 ret = ds1307->read_block_data(ds1307->client, DS3231_REG_TEMPERATURE,
874 sizeof(temp_buf), temp_buf);
875 if (ret < 0)
876 return ret;
877 if (ret != sizeof(temp_buf))
878 return -EIO;
879
880 /*
881 * Temperature is represented as a 10-bit code with a resolution of
882 * 0.25 degree celsius and encoded in two's complement format.
883 */
884 temp = (temp_buf[0] << 8) | temp_buf[1];
885 temp >>= 6;
886 *mC = temp * 250;
887
888 return 0;
889 }
890
891 static ssize_t ds3231_hwmon_show_temp(struct device *dev,
892 struct device_attribute *attr, char *buf)
893 {
894 int ret;
895 s32 temp;
896
897 ret = ds3231_hwmon_read_temp(dev, &temp);
898 if (ret)
899 return ret;
900
901 return sprintf(buf, "%d\n", temp);
902 }
903 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ds3231_hwmon_show_temp,
904 NULL, 0);
905
906 static struct attribute *ds3231_hwmon_attrs[] = {
907 &sensor_dev_attr_temp1_input.dev_attr.attr,
908 NULL,
909 };
910 ATTRIBUTE_GROUPS(ds3231_hwmon);
911
912 static void ds1307_hwmon_register(struct ds1307 *ds1307)
913 {
914 struct device *dev;
915
916 if (ds1307->type != ds_3231)
917 return;
918
919 dev = devm_hwmon_device_register_with_groups(&ds1307->client->dev,
920 ds1307->client->name,
921 ds1307, ds3231_hwmon_groups);
922 if (IS_ERR(dev)) {
923 dev_warn(&ds1307->client->dev,
924 "unable to register hwmon device %ld\n", PTR_ERR(dev));
925 }
926 }
927
928 #else
929
930 static void ds1307_hwmon_register(struct ds1307 *ds1307)
931 {
932 }
933
934 #endif /* CONFIG_RTC_DRV_DS1307_HWMON */
935
936 /*----------------------------------------------------------------------*/
937
938 /*
939 * Square-wave output support for DS3231
940 * Datasheet: https://datasheets.maximintegrated.com/en/ds/DS3231.pdf
941 */
942 #ifdef CONFIG_COMMON_CLK
943
944 enum {
945 DS3231_CLK_SQW = 0,
946 DS3231_CLK_32KHZ,
947 };
948
949 #define clk_sqw_to_ds1307(clk) \
950 container_of(clk, struct ds1307, clks[DS3231_CLK_SQW])
951 #define clk_32khz_to_ds1307(clk) \
952 container_of(clk, struct ds1307, clks[DS3231_CLK_32KHZ])
953
954 static int ds3231_clk_sqw_rates[] = {
955 1,
956 1024,
957 4096,
958 8192,
959 };
960
961 static int ds1337_write_control(struct ds1307 *ds1307, u8 mask, u8 value)
962 {
963 struct i2c_client *client = ds1307->client;
964 struct mutex *lock = &ds1307->rtc->ops_lock;
965 int control;
966 int ret;
967
968 mutex_lock(lock);
969
970 control = i2c_smbus_read_byte_data(client, DS1337_REG_CONTROL);
971 if (control < 0) {
972 ret = control;
973 goto out;
974 }
975
976 control &= ~mask;
977 control |= value;
978
979 ret = i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, control);
980 out:
981 mutex_unlock(lock);
982
983 return ret;
984 }
985
986 static unsigned long ds3231_clk_sqw_recalc_rate(struct clk_hw *hw,
987 unsigned long parent_rate)
988 {
989 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
990 int control;
991 int rate_sel = 0;
992
993 control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
994 if (control < 0)
995 return control;
996 if (control & DS1337_BIT_RS1)
997 rate_sel += 1;
998 if (control & DS1337_BIT_RS2)
999 rate_sel += 2;
1000
1001 return ds3231_clk_sqw_rates[rate_sel];
1002 }
1003
1004 static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
1005 unsigned long *prate)
1006 {
1007 int i;
1008
1009 for (i = ARRAY_SIZE(ds3231_clk_sqw_rates) - 1; i >= 0; i--) {
1010 if (ds3231_clk_sqw_rates[i] <= rate)
1011 return ds3231_clk_sqw_rates[i];
1012 }
1013
1014 return 0;
1015 }
1016
1017 static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
1018 unsigned long parent_rate)
1019 {
1020 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1021 int control = 0;
1022 int rate_sel;
1023
1024 for (rate_sel = 0; rate_sel < ARRAY_SIZE(ds3231_clk_sqw_rates);
1025 rate_sel++) {
1026 if (ds3231_clk_sqw_rates[rate_sel] == rate)
1027 break;
1028 }
1029
1030 if (rate_sel == ARRAY_SIZE(ds3231_clk_sqw_rates))
1031 return -EINVAL;
1032
1033 if (rate_sel & 1)
1034 control |= DS1337_BIT_RS1;
1035 if (rate_sel & 2)
1036 control |= DS1337_BIT_RS2;
1037
1038 return ds1337_write_control(ds1307, DS1337_BIT_RS1 | DS1337_BIT_RS2,
1039 control);
1040 }
1041
1042 static int ds3231_clk_sqw_prepare(struct clk_hw *hw)
1043 {
1044 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1045
1046 return ds1337_write_control(ds1307, DS1337_BIT_INTCN, 0);
1047 }
1048
1049 static void ds3231_clk_sqw_unprepare(struct clk_hw *hw)
1050 {
1051 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1052
1053 ds1337_write_control(ds1307, DS1337_BIT_INTCN, DS1337_BIT_INTCN);
1054 }
1055
1056 static int ds3231_clk_sqw_is_prepared(struct clk_hw *hw)
1057 {
1058 struct ds1307 *ds1307 = clk_sqw_to_ds1307(hw);
1059 int control;
1060
1061 control = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_CONTROL);
1062 if (control < 0)
1063 return control;
1064
1065 return !(control & DS1337_BIT_INTCN);
1066 }
1067
1068 static const struct clk_ops ds3231_clk_sqw_ops = {
1069 .prepare = ds3231_clk_sqw_prepare,
1070 .unprepare = ds3231_clk_sqw_unprepare,
1071 .is_prepared = ds3231_clk_sqw_is_prepared,
1072 .recalc_rate = ds3231_clk_sqw_recalc_rate,
1073 .round_rate = ds3231_clk_sqw_round_rate,
1074 .set_rate = ds3231_clk_sqw_set_rate,
1075 };
1076
1077 static unsigned long ds3231_clk_32khz_recalc_rate(struct clk_hw *hw,
1078 unsigned long parent_rate)
1079 {
1080 return 32768;
1081 }
1082
1083 static int ds3231_clk_32khz_control(struct ds1307 *ds1307, bool enable)
1084 {
1085 struct i2c_client *client = ds1307->client;
1086 struct mutex *lock = &ds1307->rtc->ops_lock;
1087 int status;
1088 int ret;
1089
1090 mutex_lock(lock);
1091
1092 status = i2c_smbus_read_byte_data(client, DS1337_REG_STATUS);
1093 if (status < 0) {
1094 ret = status;
1095 goto out;
1096 }
1097
1098 if (enable)
1099 status |= DS3231_BIT_EN32KHZ;
1100 else
1101 status &= ~DS3231_BIT_EN32KHZ;
1102
1103 ret = i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, status);
1104 out:
1105 mutex_unlock(lock);
1106
1107 return ret;
1108 }
1109
1110 static int ds3231_clk_32khz_prepare(struct clk_hw *hw)
1111 {
1112 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1113
1114 return ds3231_clk_32khz_control(ds1307, true);
1115 }
1116
1117 static void ds3231_clk_32khz_unprepare(struct clk_hw *hw)
1118 {
1119 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1120
1121 ds3231_clk_32khz_control(ds1307, false);
1122 }
1123
1124 static int ds3231_clk_32khz_is_prepared(struct clk_hw *hw)
1125 {
1126 struct ds1307 *ds1307 = clk_32khz_to_ds1307(hw);
1127 int status;
1128
1129 status = i2c_smbus_read_byte_data(ds1307->client, DS1337_REG_STATUS);
1130 if (status < 0)
1131 return status;
1132
1133 return !!(status & DS3231_BIT_EN32KHZ);
1134 }
1135
1136 static const struct clk_ops ds3231_clk_32khz_ops = {
1137 .prepare = ds3231_clk_32khz_prepare,
1138 .unprepare = ds3231_clk_32khz_unprepare,
1139 .is_prepared = ds3231_clk_32khz_is_prepared,
1140 .recalc_rate = ds3231_clk_32khz_recalc_rate,
1141 };
1142
1143 static struct clk_init_data ds3231_clks_init[] = {
1144 [DS3231_CLK_SQW] = {
1145 .name = "ds3231_clk_sqw",
1146 .ops = &ds3231_clk_sqw_ops,
1147 .flags = CLK_IS_ROOT,
1148 },
1149 [DS3231_CLK_32KHZ] = {
1150 .name = "ds3231_clk_32khz",
1151 .ops = &ds3231_clk_32khz_ops,
1152 .flags = CLK_IS_ROOT,
1153 },
1154 };
1155
1156 static int ds3231_clks_register(struct ds1307 *ds1307)
1157 {
1158 struct i2c_client *client = ds1307->client;
1159 struct device_node *node = client->dev.of_node;
1160 struct clk_onecell_data *onecell;
1161 int i;
1162
1163 onecell = devm_kzalloc(&client->dev, sizeof(*onecell), GFP_KERNEL);
1164 if (!onecell)
1165 return -ENOMEM;
1166
1167 onecell->clk_num = ARRAY_SIZE(ds3231_clks_init);
1168 onecell->clks = devm_kcalloc(&client->dev, onecell->clk_num,
1169 sizeof(onecell->clks[0]), GFP_KERNEL);
1170 if (!onecell->clks)
1171 return -ENOMEM;
1172
1173 for (i = 0; i < ARRAY_SIZE(ds3231_clks_init); i++) {
1174 struct clk_init_data init = ds3231_clks_init[i];
1175
1176 /*
1177 * Interrupt signal due to alarm conditions and square-wave
1178 * output share same pin, so don't initialize both.
1179 */
1180 if (i == DS3231_CLK_SQW && test_bit(HAS_ALARM, &ds1307->flags))
1181 continue;
1182
1183 /* optional override of the clockname */
1184 of_property_read_string_index(node, "clock-output-names", i,
1185 &init.name);
1186 ds1307->clks[i].init = &init;
1187
1188 onecell->clks[i] = devm_clk_register(&client->dev,
1189 &ds1307->clks[i]);
1190 if (IS_ERR(onecell->clks[i]))
1191 return PTR_ERR(onecell->clks[i]);
1192 }
1193
1194 if (!node)
1195 return 0;
1196
1197 of_clk_add_provider(node, of_clk_src_onecell_get, onecell);
1198
1199 return 0;
1200 }
1201
1202 static void ds1307_clks_register(struct ds1307 *ds1307)
1203 {
1204 int ret;
1205
1206 if (ds1307->type != ds_3231)
1207 return;
1208
1209 ret = ds3231_clks_register(ds1307);
1210 if (ret) {
1211 dev_warn(&ds1307->client->dev,
1212 "unable to register clock device %d\n", ret);
1213 }
1214 }
1215
1216 #else
1217
1218 static void ds1307_clks_register(struct ds1307 *ds1307)
1219 {
1220 }
1221
1222 #endif /* CONFIG_COMMON_CLK */
1223
1224 static int ds1307_probe(struct i2c_client *client,
1225 const struct i2c_device_id *id)
1226 {
1227 struct ds1307 *ds1307;
1228 int err = -ENODEV;
1229 int tmp;
1230 struct chip_desc *chip = &chips[id->driver_data];
1231 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
1232 bool want_irq = false;
1233 bool ds1307_can_wakeup_device = false;
1234 unsigned char *buf;
1235 struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
1236 irq_handler_t irq_handler = ds1307_irq;
1237
1238 static const int bbsqi_bitpos[] = {
1239 [ds_1337] = 0,
1240 [ds_1339] = DS1339_BIT_BBSQI,
1241 [ds_3231] = DS3231_BIT_BBSQW,
1242 };
1243 const struct rtc_class_ops *rtc_ops = &ds13xx_rtc_ops;
1244
1245 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)
1246 && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
1247 return -EIO;
1248
1249 ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL);
1250 if (!ds1307)
1251 return -ENOMEM;
1252
1253 i2c_set_clientdata(client, ds1307);
1254
1255 ds1307->client = client;
1256 ds1307->type = id->driver_data;
1257
1258 if (!pdata && client->dev.of_node)
1259 ds1307_trickle_of_init(client, chip);
1260 else if (pdata && pdata->trickle_charger_setup)
1261 chip->trickle_charger_setup = pdata->trickle_charger_setup;
1262
1263 if (chip->trickle_charger_setup && chip->trickle_charger_reg) {
1264 dev_dbg(&client->dev, "writing trickle charger info 0x%x to 0x%x\n",
1265 DS13XX_TRICKLE_CHARGER_MAGIC | chip->trickle_charger_setup,
1266 chip->trickle_charger_reg);
1267 i2c_smbus_write_byte_data(client, chip->trickle_charger_reg,
1268 DS13XX_TRICKLE_CHARGER_MAGIC |
1269 chip->trickle_charger_setup);
1270 }
1271
1272 buf = ds1307->regs;
1273 if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
1274 ds1307->read_block_data = ds1307_native_smbus_read_block_data;
1275 ds1307->write_block_data = ds1307_native_smbus_write_block_data;
1276 } else {
1277 ds1307->read_block_data = ds1307_read_block_data;
1278 ds1307->write_block_data = ds1307_write_block_data;
1279 }
1280
1281 #ifdef CONFIG_OF
1282 /*
1283 * For devices with no IRQ directly connected to the SoC, the RTC chip
1284 * can be forced as a wakeup source by stating that explicitly in
1285 * the device's .dts file using the "wakeup-source" boolean property.
1286 * If the "wakeup-source" property is set, don't request an IRQ.
1287 * This will guarantee the 'wakealarm' sysfs entry is available on the device,
1288 * if supported by the RTC.
1289 */
1290 if (of_property_read_bool(client->dev.of_node, "wakeup-source")) {
1291 ds1307_can_wakeup_device = true;
1292 }
1293 #endif
1294
1295 switch (ds1307->type) {
1296 case ds_1337:
1297 case ds_1339:
1298 case ds_3231:
1299 /* get registers that the "rtc" read below won't read... */
1300 tmp = ds1307->read_block_data(ds1307->client,
1301 DS1337_REG_CONTROL, 2, buf);
1302 if (tmp != 2) {
1303 dev_dbg(&client->dev, "read error %d\n", tmp);
1304 err = -EIO;
1305 goto exit;
1306 }
1307
1308 /* oscillator off? turn it on, so clock can tick. */
1309 if (ds1307->regs[0] & DS1337_BIT_nEOSC)
1310 ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
1311
1312 /*
1313 * Using IRQ or defined as wakeup-source?
1314 * Disable the square wave and both alarms.
1315 * For some variants, be sure alarms can trigger when we're
1316 * running on Vbackup (BBSQI/BBSQW)
1317 */
1318 if (chip->alarm && (ds1307->client->irq > 0 ||
1319 ds1307_can_wakeup_device)) {
1320 ds1307->regs[0] |= DS1337_BIT_INTCN
1321 | bbsqi_bitpos[ds1307->type];
1322 ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
1323
1324 want_irq = true;
1325 }
1326
1327 i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
1328 ds1307->regs[0]);
1329
1330 /* oscillator fault? clear flag, and warn */
1331 if (ds1307->regs[1] & DS1337_BIT_OSF) {
1332 i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
1333 ds1307->regs[1] & ~DS1337_BIT_OSF);
1334 dev_warn(&client->dev, "SET TIME!\n");
1335 }
1336 break;
1337
1338 case rx_8025:
1339 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1340 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1341 if (tmp != 2) {
1342 dev_dbg(&client->dev, "read error %d\n", tmp);
1343 err = -EIO;
1344 goto exit;
1345 }
1346
1347 /* oscillator off? turn it on, so clock can tick. */
1348 if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
1349 ds1307->regs[1] |= RX8025_BIT_XST;
1350 i2c_smbus_write_byte_data(client,
1351 RX8025_REG_CTRL2 << 4 | 0x08,
1352 ds1307->regs[1]);
1353 dev_warn(&client->dev,
1354 "oscillator stop detected - SET TIME!\n");
1355 }
1356
1357 if (ds1307->regs[1] & RX8025_BIT_PON) {
1358 ds1307->regs[1] &= ~RX8025_BIT_PON;
1359 i2c_smbus_write_byte_data(client,
1360 RX8025_REG_CTRL2 << 4 | 0x08,
1361 ds1307->regs[1]);
1362 dev_warn(&client->dev, "power-on detected\n");
1363 }
1364
1365 if (ds1307->regs[1] & RX8025_BIT_VDET) {
1366 ds1307->regs[1] &= ~RX8025_BIT_VDET;
1367 i2c_smbus_write_byte_data(client,
1368 RX8025_REG_CTRL2 << 4 | 0x08,
1369 ds1307->regs[1]);
1370 dev_warn(&client->dev, "voltage drop detected\n");
1371 }
1372
1373 /* make sure we are running in 24hour mode */
1374 if (!(ds1307->regs[0] & RX8025_BIT_2412)) {
1375 u8 hour;
1376
1377 /* switch to 24 hour mode */
1378 i2c_smbus_write_byte_data(client,
1379 RX8025_REG_CTRL1 << 4 | 0x08,
1380 ds1307->regs[0] |
1381 RX8025_BIT_2412);
1382
1383 tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
1384 RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
1385 if (tmp != 2) {
1386 dev_dbg(&client->dev, "read error %d\n", tmp);
1387 err = -EIO;
1388 goto exit;
1389 }
1390
1391 /* correct hour */
1392 hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]);
1393 if (hour == 12)
1394 hour = 0;
1395 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1396 hour += 12;
1397
1398 i2c_smbus_write_byte_data(client,
1399 DS1307_REG_HOUR << 4 | 0x08,
1400 hour);
1401 }
1402 break;
1403 case ds_1388:
1404 ds1307->offset = 1; /* Seconds starts at 1 */
1405 break;
1406 case mcp794xx:
1407 rtc_ops = &mcp794xx_rtc_ops;
1408 if (ds1307->client->irq > 0 && chip->alarm) {
1409 irq_handler = mcp794xx_irq;
1410 want_irq = true;
1411 }
1412 break;
1413 default:
1414 break;
1415 }
1416
1417 read_rtc:
1418 /* read RTC registers */
1419 tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
1420 if (tmp != 8) {
1421 dev_dbg(&client->dev, "read error %d\n", tmp);
1422 err = -EIO;
1423 goto exit;
1424 }
1425
1426 /*
1427 * minimal sanity checking; some chips (like DS1340) don't
1428 * specify the extra bits as must-be-zero, but there are
1429 * still a few values that are clearly out-of-range.
1430 */
1431 tmp = ds1307->regs[DS1307_REG_SECS];
1432 switch (ds1307->type) {
1433 case ds_1307:
1434 case m41t00:
1435 /* clock halted? turn it on, so clock can tick. */
1436 if (tmp & DS1307_BIT_CH) {
1437 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1438 dev_warn(&client->dev, "SET TIME!\n");
1439 goto read_rtc;
1440 }
1441 break;
1442 case ds_1338:
1443 /* clock halted? turn it on, so clock can tick. */
1444 if (tmp & DS1307_BIT_CH)
1445 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1446
1447 /* oscillator fault? clear flag, and warn */
1448 if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
1449 i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
1450 ds1307->regs[DS1307_REG_CONTROL]
1451 & ~DS1338_BIT_OSF);
1452 dev_warn(&client->dev, "SET TIME!\n");
1453 goto read_rtc;
1454 }
1455 break;
1456 case ds_1340:
1457 /* clock halted? turn it on, so clock can tick. */
1458 if (tmp & DS1340_BIT_nEOSC)
1459 i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
1460
1461 tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
1462 if (tmp < 0) {
1463 dev_dbg(&client->dev, "read error %d\n", tmp);
1464 err = -EIO;
1465 goto exit;
1466 }
1467
1468 /* oscillator fault? clear flag, and warn */
1469 if (tmp & DS1340_BIT_OSF) {
1470 i2c_smbus_write_byte_data(client, DS1340_REG_FLAG, 0);
1471 dev_warn(&client->dev, "SET TIME!\n");
1472 }
1473 break;
1474 case mcp794xx:
1475 /* make sure that the backup battery is enabled */
1476 if (!(ds1307->regs[DS1307_REG_WDAY] & MCP794XX_BIT_VBATEN)) {
1477 i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
1478 ds1307->regs[DS1307_REG_WDAY]
1479 | MCP794XX_BIT_VBATEN);
1480 }
1481
1482 /* clock halted? turn it on, so clock can tick. */
1483 if (!(tmp & MCP794XX_BIT_ST)) {
1484 i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
1485 MCP794XX_BIT_ST);
1486 dev_warn(&client->dev, "SET TIME!\n");
1487 goto read_rtc;
1488 }
1489
1490 break;
1491 default:
1492 break;
1493 }
1494
1495 tmp = ds1307->regs[DS1307_REG_HOUR];
1496 switch (ds1307->type) {
1497 case ds_1340:
1498 case m41t00:
1499 /*
1500 * NOTE: ignores century bits; fix before deploying
1501 * systems that will run through year 2100.
1502 */
1503 break;
1504 case rx_8025:
1505 break;
1506 default:
1507 if (!(tmp & DS1307_BIT_12HR))
1508 break;
1509
1510 /*
1511 * Be sure we're in 24 hour mode. Multi-master systems
1512 * take note...
1513 */
1514 tmp = bcd2bin(tmp & 0x1f);
1515 if (tmp == 12)
1516 tmp = 0;
1517 if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
1518 tmp += 12;
1519 i2c_smbus_write_byte_data(client,
1520 ds1307->offset + DS1307_REG_HOUR,
1521 bin2bcd(tmp));
1522 }
1523
1524 if (want_irq) {
1525 device_set_wakeup_capable(&client->dev, true);
1526 set_bit(HAS_ALARM, &ds1307->flags);
1527 }
1528 ds1307->rtc = devm_rtc_device_register(&client->dev, client->name,
1529 rtc_ops, THIS_MODULE);
1530 if (IS_ERR(ds1307->rtc)) {
1531 return PTR_ERR(ds1307->rtc);
1532 }
1533
1534 if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) {
1535 /* Disable request for an IRQ */
1536 want_irq = false;
1537 dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n");
1538 /* We cannot support UIE mode if we do not have an IRQ line */
1539 ds1307->rtc->uie_unsupported = 1;
1540 }
1541
1542 if (want_irq) {
1543 err = devm_request_threaded_irq(&client->dev,
1544 client->irq, NULL, irq_handler,
1545 IRQF_SHARED | IRQF_ONESHOT,
1546 ds1307->rtc->name, client);
1547 if (err) {
1548 client->irq = 0;
1549 device_set_wakeup_capable(&client->dev, false);
1550 clear_bit(HAS_ALARM, &ds1307->flags);
1551 dev_err(&client->dev, "unable to request IRQ!\n");
1552 } else
1553 dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
1554 }
1555
1556 if (chip->nvram_size) {
1557
1558 ds1307->nvram = devm_kzalloc(&client->dev,
1559 sizeof(struct bin_attribute),
1560 GFP_KERNEL);
1561 if (!ds1307->nvram) {
1562 dev_err(&client->dev, "cannot allocate memory for nvram sysfs\n");
1563 } else {
1564
1565 ds1307->nvram->attr.name = "nvram";
1566 ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR;
1567
1568 sysfs_bin_attr_init(ds1307->nvram);
1569
1570 ds1307->nvram->read = ds1307_nvram_read;
1571 ds1307->nvram->write = ds1307_nvram_write;
1572 ds1307->nvram->size = chip->nvram_size;
1573 ds1307->nvram_offset = chip->nvram_offset;
1574
1575 err = sysfs_create_bin_file(&client->dev.kobj,
1576 ds1307->nvram);
1577 if (err) {
1578 dev_err(&client->dev,
1579 "unable to create sysfs file: %s\n",
1580 ds1307->nvram->attr.name);
1581 } else {
1582 set_bit(HAS_NVRAM, &ds1307->flags);
1583 dev_info(&client->dev, "%zu bytes nvram\n",
1584 ds1307->nvram->size);
1585 }
1586 }
1587 }
1588
1589 ds1307_hwmon_register(ds1307);
1590 ds1307_clks_register(ds1307);
1591
1592 return 0;
1593
1594 exit:
1595 return err;
1596 }
1597
1598 static int ds1307_remove(struct i2c_client *client)
1599 {
1600 struct ds1307 *ds1307 = i2c_get_clientdata(client);
1601
1602 if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
1603 sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
1604
1605 return 0;
1606 }
1607
1608 static struct i2c_driver ds1307_driver = {
1609 .driver = {
1610 .name = "rtc-ds1307",
1611 },
1612 .probe = ds1307_probe,
1613 .remove = ds1307_remove,
1614 .id_table = ds1307_id,
1615 };
1616
1617 module_i2c_driver(ds1307_driver);
1618
1619 MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
1620 MODULE_LICENSE("GPL");
Linux with added FPC-III support