?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
usb: xhci-plat: properly handle probe deferral for devm_clk_get()
[linux/fpc-iii.git] / drivers / rtc / rtc-rs5c372.c
blob28871cd7e3b592681d0839b2830b710e4bce0d60
1 /*
2 * An I2C driver for Ricoh RS5C372, R2025S/D and RV5C38[67] RTCs
3 *
4 * Copyright (C) 2005 Pavel Mironchik <pmironchik@optifacio.net>
5 * Copyright (C) 2006 Tower Technologies
6 * Copyright (C) 2008 Paul Mundt
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13 #include <linux/i2c.h>
14 #include <linux/rtc.h>
15 #include <linux/bcd.h>
16 #include <linux/slab.h>
17 #include <linux/module.h>
18
19 #define DRV_VERSION "0.6"
20
21
22 /*
23 * Ricoh has a family of I2C based RTCs, which differ only slightly from
24 * each other. Differences center on pinout (e.g. how many interrupts,
25 * output clock, etc) and how the control registers are used. The '372
26 * is significant only because that's the one this driver first supported.
27 */
28 #define RS5C372_REG_SECS 0
29 #define RS5C372_REG_MINS 1
30 #define RS5C372_REG_HOURS 2
31 #define RS5C372_REG_WDAY 3
32 #define RS5C372_REG_DAY 4
33 #define RS5C372_REG_MONTH 5
34 #define RS5C372_REG_YEAR 6
35 #define RS5C372_REG_TRIM 7
36 # define RS5C372_TRIM_XSL 0x80
37 # define RS5C372_TRIM_MASK 0x7F
38
39 #define RS5C_REG_ALARM_A_MIN 8 /* or ALARM_W */
40 #define RS5C_REG_ALARM_A_HOURS 9
41 #define RS5C_REG_ALARM_A_WDAY 10
42
43 #define RS5C_REG_ALARM_B_MIN 11 /* or ALARM_D */
44 #define RS5C_REG_ALARM_B_HOURS 12
45 #define RS5C_REG_ALARM_B_WDAY 13 /* (ALARM_B only) */
46
47 #define RS5C_REG_CTRL1 14
48 # define RS5C_CTRL1_AALE (1 << 7) /* or WALE */
49 # define RS5C_CTRL1_BALE (1 << 6) /* or DALE */
50 # define RV5C387_CTRL1_24 (1 << 5)
51 # define RS5C372A_CTRL1_SL1 (1 << 5)
52 # define RS5C_CTRL1_CT_MASK (7 << 0)
53 # define RS5C_CTRL1_CT0 (0 << 0) /* no periodic irq */
54 # define RS5C_CTRL1_CT4 (4 << 0) /* 1 Hz level irq */
55 #define RS5C_REG_CTRL2 15
56 # define RS5C372_CTRL2_24 (1 << 5)
57 # define R2025_CTRL2_XST (1 << 5)
58 # define RS5C_CTRL2_XSTP (1 << 4) /* only if !R2025S/D */
59 # define RS5C_CTRL2_CTFG (1 << 2)
60 # define RS5C_CTRL2_AAFG (1 << 1) /* or WAFG */
61 # define RS5C_CTRL2_BAFG (1 << 0) /* or DAFG */
62
63
64 /* to read (style 1) or write registers starting at R */
65 #define RS5C_ADDR(R) (((R) << 4) | 0)
66
67
68 enum rtc_type {
69 rtc_undef = 0,
70 rtc_r2025sd,
71 rtc_r2221tl,
72 rtc_rs5c372a,
73 rtc_rs5c372b,
74 rtc_rv5c386,
75 rtc_rv5c387a,
76 };
77
78 static const struct i2c_device_id rs5c372_id[] = {
79 { "r2025sd", rtc_r2025sd },
80 { "r2221tl", rtc_r2221tl },
81 { "rs5c372a", rtc_rs5c372a },
82 { "rs5c372b", rtc_rs5c372b },
83 { "rv5c386", rtc_rv5c386 },
84 { "rv5c387a", rtc_rv5c387a },
85 { }
86 };
87 MODULE_DEVICE_TABLE(i2c, rs5c372_id);
88
89 /* REVISIT: this assumes that:
90 * - we're in the 21st century, so it's safe to ignore the century
91 * bit for rv5c38[67] (REG_MONTH bit 7);
92 * - we should use ALARM_A not ALARM_B (may be wrong on some boards)
93 */
94 struct rs5c372 {
95 struct i2c_client *client;
96 struct rtc_device *rtc;
97 enum rtc_type type;
98 unsigned time24:1;
99 unsigned has_irq:1;
100 unsigned smbus:1;
101 char buf[17];
102 char *regs;
103 };
104
105 static int rs5c_get_regs(struct rs5c372 *rs5c)
106 {
107 struct i2c_client *client = rs5c->client;
108 struct i2c_msg msgs[] = {
109 {
110 .addr = client->addr,
111 .flags = I2C_M_RD,
112 .len = sizeof(rs5c->buf),
113 .buf = rs5c->buf
114 },
115 };
116
117 /* This implements the third reading method from the datasheet, using
118 * an internal address that's reset after each transaction (by STOP)
119 * to 0x0f ... so we read extra registers, and skip the first one.
120 *
121 * The first method doesn't work with the iop3xx adapter driver, on at
122 * least 80219 chips; this works around that bug.
123 *
124 * The third method on the other hand doesn't work for the SMBus-only
125 * configurations, so we use the the first method there, stripping off
126 * the extra register in the process.
127 */
128 if (rs5c->smbus) {
129 int addr = RS5C_ADDR(RS5C372_REG_SECS);
130 int size = sizeof(rs5c->buf) - 1;
131
132 if (i2c_smbus_read_i2c_block_data(client, addr, size,
133 rs5c->buf + 1) != size) {
134 dev_warn(&client->dev, "can't read registers\n");
135 return -EIO;
136 }
137 } else {
138 if ((i2c_transfer(client->adapter, msgs, 1)) != 1) {
139 dev_warn(&client->dev, "can't read registers\n");
140 return -EIO;
141 }
142 }
143
144 dev_dbg(&client->dev,
145 "%3ph (%02x) %3ph (%02x), %3ph, %3ph; %02x %02x\n",
146 rs5c->regs + 0, rs5c->regs[3],
147 rs5c->regs + 4, rs5c->regs[7],
148 rs5c->regs + 8, rs5c->regs + 11,
149 rs5c->regs[14], rs5c->regs[15]);
150
151 return 0;
152 }
153
154 static unsigned rs5c_reg2hr(struct rs5c372 *rs5c, unsigned reg)
155 {
156 unsigned hour;
157
158 if (rs5c->time24)
159 return bcd2bin(reg & 0x3f);
160
161 hour = bcd2bin(reg & 0x1f);
162 if (hour == 12)
163 hour = 0;
164 if (reg & 0x20)
165 hour += 12;
166 return hour;
167 }
168
169 static unsigned rs5c_hr2reg(struct rs5c372 *rs5c, unsigned hour)
170 {
171 if (rs5c->time24)
172 return bin2bcd(hour);
173
174 if (hour > 12)
175 return 0x20 | bin2bcd(hour - 12);
176 if (hour == 12)
177 return 0x20 | bin2bcd(12);
178 if (hour == 0)
179 return bin2bcd(12);
180 return bin2bcd(hour);
181 }
182
183 static int rs5c372_get_datetime(struct i2c_client *client, struct rtc_time *tm)
184 {
185 struct rs5c372 *rs5c = i2c_get_clientdata(client);
186 int status = rs5c_get_regs(rs5c);
187
188 if (status < 0)
189 return status;
190
191 tm->tm_sec = bcd2bin(rs5c->regs[RS5C372_REG_SECS] & 0x7f);
192 tm->tm_min = bcd2bin(rs5c->regs[RS5C372_REG_MINS] & 0x7f);
193 tm->tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C372_REG_HOURS]);
194
195 tm->tm_wday = bcd2bin(rs5c->regs[RS5C372_REG_WDAY] & 0x07);
196 tm->tm_mday = bcd2bin(rs5c->regs[RS5C372_REG_DAY] & 0x3f);
197
198 /* tm->tm_mon is zero-based */
199 tm->tm_mon = bcd2bin(rs5c->regs[RS5C372_REG_MONTH] & 0x1f) - 1;
200
201 /* year is 1900 + tm->tm_year */
202 tm->tm_year = bcd2bin(rs5c->regs[RS5C372_REG_YEAR]) + 100;
203
204 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
205 "mday=%d, mon=%d, year=%d, wday=%d\n",
206 __func__,
207 tm->tm_sec, tm->tm_min, tm->tm_hour,
208 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
209
210 /* rtc might need initialization */
211 return rtc_valid_tm(tm);
212 }
213
214 static int rs5c372_set_datetime(struct i2c_client *client, struct rtc_time *tm)
215 {
216 struct rs5c372 *rs5c = i2c_get_clientdata(client);
217 unsigned char buf[7];
218 int addr;
219
220 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d "
221 "mday=%d, mon=%d, year=%d, wday=%d\n",
222 __func__,
223 tm->tm_sec, tm->tm_min, tm->tm_hour,
224 tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
225
226 addr = RS5C_ADDR(RS5C372_REG_SECS);
227 buf[0] = bin2bcd(tm->tm_sec);
228 buf[1] = bin2bcd(tm->tm_min);
229 buf[2] = rs5c_hr2reg(rs5c, tm->tm_hour);
230 buf[3] = bin2bcd(tm->tm_wday);
231 buf[4] = bin2bcd(tm->tm_mday);
232 buf[5] = bin2bcd(tm->tm_mon + 1);
233 buf[6] = bin2bcd(tm->tm_year - 100);
234
235 if (i2c_smbus_write_i2c_block_data(client, addr, sizeof(buf), buf) < 0) {
236 dev_err(&client->dev, "%s: write error\n", __func__);
237 return -EIO;
238 }
239
240 return 0;
241 }
242
243 #if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
244 #define NEED_TRIM
245 #endif
246
247 #if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)
248 #define NEED_TRIM
249 #endif
250
251 #ifdef NEED_TRIM
252 static int rs5c372_get_trim(struct i2c_client *client, int *osc, int *trim)
253 {
254 struct rs5c372 *rs5c372 = i2c_get_clientdata(client);
255 u8 tmp = rs5c372->regs[RS5C372_REG_TRIM];
256
257 if (osc)
258 *osc = (tmp & RS5C372_TRIM_XSL) ? 32000 : 32768;
259
260 if (trim) {
261 dev_dbg(&client->dev, "%s: raw trim=%x\n", __func__, tmp);
262 tmp &= RS5C372_TRIM_MASK;
263 if (tmp & 0x3e) {
264 int t = tmp & 0x3f;
265
266 if (tmp & 0x40)
267 t = (~t | (s8)0xc0) + 1;
268 else
269 t = t - 1;
270
271 tmp = t * 2;
272 } else
273 tmp = 0;
274 *trim = tmp;
275 }
276
277 return 0;
278 }
279 #endif
280
281 static int rs5c372_rtc_read_time(struct device *dev, struct rtc_time *tm)
282 {
283 return rs5c372_get_datetime(to_i2c_client(dev), tm);
284 }
285
286 static int rs5c372_rtc_set_time(struct device *dev, struct rtc_time *tm)
287 {
288 return rs5c372_set_datetime(to_i2c_client(dev), tm);
289 }
290
291
292 static int rs5c_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
293 {
294 struct i2c_client *client = to_i2c_client(dev);
295 struct rs5c372 *rs5c = i2c_get_clientdata(client);
296 unsigned char buf;
297 int status, addr;
298
299 buf = rs5c->regs[RS5C_REG_CTRL1];
300
301 if (!rs5c->has_irq)
302 return -EINVAL;
303
304 status = rs5c_get_regs(rs5c);
305 if (status < 0)
306 return status;
307
308 addr = RS5C_ADDR(RS5C_REG_CTRL1);
309 if (enabled)
310 buf |= RS5C_CTRL1_AALE;
311 else
312 buf &= ~RS5C_CTRL1_AALE;
313
314 if (i2c_smbus_write_byte_data(client, addr, buf) < 0) {
315 dev_warn(dev, "can't update alarm\n");
316 status = -EIO;
317 } else
318 rs5c->regs[RS5C_REG_CTRL1] = buf;
319
320 return status;
321 }
322
323
324 /* NOTE: Since RTC_WKALM_{RD,SET} were originally defined for EFI,
325 * which only exposes a polled programming interface; and since
326 * these calls map directly to those EFI requests; we don't demand
327 * we have an IRQ for this chip when we go through this API.
328 *
329 * The older x86_pc derived RTC_ALM_{READ,SET} calls require irqs
330 * though, managed through RTC_AIE_{ON,OFF} requests.
331 */
332
333 static int rs5c_read_alarm(struct device *dev, struct rtc_wkalrm *t)
334 {
335 struct i2c_client *client = to_i2c_client(dev);
336 struct rs5c372 *rs5c = i2c_get_clientdata(client);
337 int status;
338
339 status = rs5c_get_regs(rs5c);
340 if (status < 0)
341 return status;
342
343 /* report alarm time */
344 t->time.tm_sec = 0;
345 t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f);
346 t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]);
347 t->time.tm_mday = -1;
348 t->time.tm_mon = -1;
349 t->time.tm_year = -1;
350 t->time.tm_wday = -1;
351 t->time.tm_yday = -1;
352 t->time.tm_isdst = -1;
353
354 /* ... and status */
355 t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE);
356 t->pending = !!(rs5c->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_AAFG);
357
358 return 0;
359 }
360
361 static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t)
362 {
363 struct i2c_client *client = to_i2c_client(dev);
364 struct rs5c372 *rs5c = i2c_get_clientdata(client);
365 int status, addr, i;
366 unsigned char buf[3];
367
368 /* only handle up to 24 hours in the future, like RTC_ALM_SET */
369 if (t->time.tm_mday != -1
370 || t->time.tm_mon != -1
371 || t->time.tm_year != -1)
372 return -EINVAL;
373
374 /* REVISIT: round up tm_sec */
375
376 /* if needed, disable irq (clears pending status) */
377 status = rs5c_get_regs(rs5c);
378 if (status < 0)
379 return status;
380 if (rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE) {
381 addr = RS5C_ADDR(RS5C_REG_CTRL1);
382 buf[0] = rs5c->regs[RS5C_REG_CTRL1] & ~RS5C_CTRL1_AALE;
383 if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0) {
384 dev_dbg(dev, "can't disable alarm\n");
385 return -EIO;
386 }
387 rs5c->regs[RS5C_REG_CTRL1] = buf[0];
388 }
389
390 /* set alarm */
391 buf[0] = bin2bcd(t->time.tm_min);
392 buf[1] = rs5c_hr2reg(rs5c, t->time.tm_hour);
393 buf[2] = 0x7f; /* any/all days */
394
395 for (i = 0; i < sizeof(buf); i++) {
396 addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i);
397 if (i2c_smbus_write_byte_data(client, addr, buf[i]) < 0) {
398 dev_dbg(dev, "can't set alarm time\n");
399 return -EIO;
400 }
401 }
402
403 /* ... and maybe enable its irq */
404 if (t->enabled) {
405 addr = RS5C_ADDR(RS5C_REG_CTRL1);
406 buf[0] = rs5c->regs[RS5C_REG_CTRL1] | RS5C_CTRL1_AALE;
407 if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0)
408 dev_warn(dev, "can't enable alarm\n");
409 rs5c->regs[RS5C_REG_CTRL1] = buf[0];
410 }
411
412 return 0;
413 }
414
415 #if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
416
417 static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq)
418 {
419 int err, osc, trim;
420
421 err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim);
422 if (err == 0) {
423 seq_printf(seq, "crystal\t\t: %d.%03d KHz\n",
424 osc / 1000, osc % 1000);
425 seq_printf(seq, "trim\t\t: %d\n", trim);
426 }
427
428 return 0;
429 }
430
431 #else
432 #define rs5c372_rtc_proc NULL
433 #endif
434
435 static const struct rtc_class_ops rs5c372_rtc_ops = {
436 .proc = rs5c372_rtc_proc,
437 .read_time = rs5c372_rtc_read_time,
438 .set_time = rs5c372_rtc_set_time,
439 .read_alarm = rs5c_read_alarm,
440 .set_alarm = rs5c_set_alarm,
441 .alarm_irq_enable = rs5c_rtc_alarm_irq_enable,
442 };
443
444 #if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)
445
446 static ssize_t rs5c372_sysfs_show_trim(struct device *dev,
447 struct device_attribute *attr, char *buf)
448 {
449 int err, trim;
450
451 err = rs5c372_get_trim(to_i2c_client(dev), NULL, &trim);
452 if (err)
453 return err;
454
455 return sprintf(buf, "%d\n", trim);
456 }
457 static DEVICE_ATTR(trim, S_IRUGO, rs5c372_sysfs_show_trim, NULL);
458
459 static ssize_t rs5c372_sysfs_show_osc(struct device *dev,
460 struct device_attribute *attr, char *buf)
461 {
462 int err, osc;
463
464 err = rs5c372_get_trim(to_i2c_client(dev), &osc, NULL);
465 if (err)
466 return err;
467
468 return sprintf(buf, "%d.%03d KHz\n", osc / 1000, osc % 1000);
469 }
470 static DEVICE_ATTR(osc, S_IRUGO, rs5c372_sysfs_show_osc, NULL);
471
472 static int rs5c_sysfs_register(struct device *dev)
473 {
474 int err;
475
476 err = device_create_file(dev, &dev_attr_trim);
477 if (err)
478 return err;
479 err = device_create_file(dev, &dev_attr_osc);
480 if (err)
481 device_remove_file(dev, &dev_attr_trim);
482
483 return err;
484 }
485
486 static void rs5c_sysfs_unregister(struct device *dev)
487 {
488 device_remove_file(dev, &dev_attr_trim);
489 device_remove_file(dev, &dev_attr_osc);
490 }
491
492 #else
493 static int rs5c_sysfs_register(struct device *dev)
494 {
495 return 0;
496 }
497
498 static void rs5c_sysfs_unregister(struct device *dev)
499 {
500 /* nothing */
501 }
502 #endif /* SYSFS */
503
504 static struct i2c_driver rs5c372_driver;
505
506 static int rs5c_oscillator_setup(struct rs5c372 *rs5c372)
507 {
508 unsigned char buf[2];
509 int addr, i, ret = 0;
510
511 if (rs5c372->type == rtc_r2025sd) {
512 if (!(rs5c372->regs[RS5C_REG_CTRL2] & R2025_CTRL2_XST))
513 return ret;
514 rs5c372->regs[RS5C_REG_CTRL2] &= ~R2025_CTRL2_XST;
515 } else {
516 if (!(rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP))
517 return ret;
518 rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP;
519 }
520
521 addr = RS5C_ADDR(RS5C_REG_CTRL1);
522 buf[0] = rs5c372->regs[RS5C_REG_CTRL1];
523 buf[1] = rs5c372->regs[RS5C_REG_CTRL2];
524
525 /* use 24hr mode */
526 switch (rs5c372->type) {
527 case rtc_rs5c372a:
528 case rtc_rs5c372b:
529 buf[1] |= RS5C372_CTRL2_24;
530 rs5c372->time24 = 1;
531 break;
532 case rtc_r2025sd:
533 case rtc_r2221tl:
534 case rtc_rv5c386:
535 case rtc_rv5c387a:
536 buf[0] |= RV5C387_CTRL1_24;
537 rs5c372->time24 = 1;
538 break;
539 default:
540 /* impossible */
541 break;
542 }
543
544 for (i = 0; i < sizeof(buf); i++) {
545 addr = RS5C_ADDR(RS5C_REG_CTRL1 + i);
546 ret = i2c_smbus_write_byte_data(rs5c372->client, addr, buf[i]);
547 if (unlikely(ret < 0))
548 return ret;
549 }
550
551 rs5c372->regs[RS5C_REG_CTRL1] = buf[0];
552 rs5c372->regs[RS5C_REG_CTRL2] = buf[1];
553
554 return 0;
555 }
556
557 static int rs5c372_probe(struct i2c_client *client,
558 const struct i2c_device_id *id)
559 {
560 int err = 0;
561 int smbus_mode = 0;
562 struct rs5c372 *rs5c372;
563 struct rtc_time tm;
564
565 dev_dbg(&client->dev, "%s\n", __func__);
566
567 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
568 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK)) {
569 /*
570 * If we don't have any master mode adapter, try breaking
571 * it down in to the barest of capabilities.
572 */
573 if (i2c_check_functionality(client->adapter,
574 I2C_FUNC_SMBUS_BYTE_DATA |
575 I2C_FUNC_SMBUS_I2C_BLOCK))
576 smbus_mode = 1;
577 else {
578 /* Still no good, give up */
579 err = -ENODEV;
580 goto exit;
581 }
582 }
583
584 rs5c372 = devm_kzalloc(&client->dev, sizeof(struct rs5c372),
585 GFP_KERNEL);
586 if (!rs5c372) {
587 err = -ENOMEM;
588 goto exit;
589 }
590
591 rs5c372->client = client;
592 i2c_set_clientdata(client, rs5c372);
593 rs5c372->type = id->driver_data;
594
595 /* we read registers 0x0f then 0x00-0x0f; skip the first one */
596 rs5c372->regs = &rs5c372->buf[1];
597 rs5c372->smbus = smbus_mode;
598
599 err = rs5c_get_regs(rs5c372);
600 if (err < 0)
601 goto exit;
602
603 /* clock may be set for am/pm or 24 hr time */
604 switch (rs5c372->type) {
605 case rtc_rs5c372a:
606 case rtc_rs5c372b:
607 /* alarm uses ALARM_A; and nINTRA on 372a, nINTR on 372b.
608 * so does periodic irq, except some 327a modes.
609 */
610 if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C372_CTRL2_24)
611 rs5c372->time24 = 1;
612 break;
613 case rtc_r2025sd:
614 case rtc_r2221tl:
615 case rtc_rv5c386:
616 case rtc_rv5c387a:
617 if (rs5c372->regs[RS5C_REG_CTRL1] & RV5C387_CTRL1_24)
618 rs5c372->time24 = 1;
619 /* alarm uses ALARM_W; and nINTRB for alarm and periodic
620 * irq, on both 386 and 387
621 */
622 break;
623 default:
624 dev_err(&client->dev, "unknown RTC type\n");
625 goto exit;
626 }
627
628 /* if the oscillator lost power and no other software (like
629 * the bootloader) set it up, do it here.
630 *
631 * The R2025S/D does this a little differently than the other
632 * parts, so we special case that..
633 */
634 err = rs5c_oscillator_setup(rs5c372);
635 if (unlikely(err < 0)) {
636 dev_err(&client->dev, "setup error\n");
637 goto exit;
638 }
639
640 if (rs5c372_get_datetime(client, &tm) < 0)
641 dev_warn(&client->dev, "clock needs to be set\n");
642
643 dev_info(&client->dev, "%s found, %s, driver version " DRV_VERSION "\n",
644 ({ char *s; switch (rs5c372->type) {
645 case rtc_r2025sd: s = "r2025sd"; break;
646 case rtc_r2221tl: s = "r2221tl"; break;
647 case rtc_rs5c372a: s = "rs5c372a"; break;
648 case rtc_rs5c372b: s = "rs5c372b"; break;
649 case rtc_rv5c386: s = "rv5c386"; break;
650 case rtc_rv5c387a: s = "rv5c387a"; break;
651 default: s = "chip"; break;
652 }; s;}),
653 rs5c372->time24 ? "24hr" : "am/pm"
654 );
655
656 /* REVISIT use client->irq to register alarm irq ... */
657 rs5c372->rtc = devm_rtc_device_register(&client->dev,
658 rs5c372_driver.driver.name,
659 &rs5c372_rtc_ops, THIS_MODULE);
660
661 if (IS_ERR(rs5c372->rtc)) {
662 err = PTR_ERR(rs5c372->rtc);
663 goto exit;
664 }
665
666 err = rs5c_sysfs_register(&client->dev);
667 if (err)
668 goto exit;
669
670 return 0;
671
672 exit:
673 return err;
674 }
675
676 static int rs5c372_remove(struct i2c_client *client)
677 {
678 rs5c_sysfs_unregister(&client->dev);
679 return 0;
680 }
681
682 static struct i2c_driver rs5c372_driver = {
683 .driver = {
684 .name = "rtc-rs5c372",
685 },
686 .probe = rs5c372_probe,
687 .remove = rs5c372_remove,
688 .id_table = rs5c372_id,
689 };
690
691 module_i2c_driver(rs5c372_driver);
692
693 MODULE_AUTHOR(
694 "Pavel Mironchik <pmironchik@optifacio.net>, "
695 "Alessandro Zummo <a.zummo@towertech.it>, "
696 "Paul Mundt <lethal@linux-sh.org>");
697 MODULE_DESCRIPTION("Ricoh RS5C372 RTC driver");
698 MODULE_LICENSE("GPL");
699 MODULE_VERSION(DRV_VERSION);
Linux with added FPC-III support