2 * OMAP7xx SPI 100k controller driver
3 * Author: Fabrice Crohas <fcrohas@gmail.com>
4 * from original omap1_mcspi driver
6 * Copyright (C) 2005, 2006 Nokia Corporation
7 * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
8 * Juha Yrj�l� <juha.yrjola@nokia.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 #include <linux/kernel.h>
21 #include <linux/init.h>
22 #include <linux/interrupt.h>
23 #include <linux/module.h>
24 #include <linux/device.h>
25 #include <linux/delay.h>
26 #include <linux/platform_device.h>
27 #include <linux/pm_runtime.h>
28 #include <linux/err.h>
29 #include <linux/clk.h>
31 #include <linux/gpio.h>
32 #include <linux/slab.h>
34 #include <linux/spi/spi.h>
36 #define OMAP1_SPI100K_MAX_FREQ 48000000
38 #define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12)
40 #define SPI_SETUP1 0x00
41 #define SPI_SETUP2 0x02
43 #define SPI_STATUS 0x06
44 #define SPI_TX_LSB 0x08
45 #define SPI_TX_MSB 0x0a
46 #define SPI_RX_LSB 0x0c
47 #define SPI_RX_MSB 0x0e
49 #define SPI_SETUP1_INT_READ_ENABLE (1UL << 5)
50 #define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4)
51 #define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1)
52 #define SPI_SETUP1_CLOCK_ENABLE (1UL << 0)
54 #define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0)
55 #define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0)
56 #define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5)
57 #define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5)
58 #define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10)
59 #define SPI_SETUP2_EDGE_TRIGGER (1UL << 10)
61 #define SPI_CTRL_SEN(x) ((x) << 7)
62 #define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2)
63 #define SPI_CTRL_WR (1UL << 1)
64 #define SPI_CTRL_RD (1UL << 0)
66 #define SPI_STATUS_WE (1UL << 1)
67 #define SPI_STATUS_RD (1UL << 0)
69 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
70 * cache operations; better heuristics consider wordsize and bitrate.
72 #define DMA_MIN_BYTES 8
75 #define SPI_SHUTDOWN 1
77 struct omap1_spi100k
{
81 /* Virtual base address of the controller */
85 struct omap1_spi100k_cs
{
90 static void spi100k_enable_clock(struct spi_master
*master
)
93 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
96 val
= readw(spi100k
->base
+ SPI_SETUP1
);
97 val
|= SPI_SETUP1_CLOCK_ENABLE
;
98 writew(val
, spi100k
->base
+ SPI_SETUP1
);
101 static void spi100k_disable_clock(struct spi_master
*master
)
104 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
107 val
= readw(spi100k
->base
+ SPI_SETUP1
);
108 val
&= ~SPI_SETUP1_CLOCK_ENABLE
;
109 writew(val
, spi100k
->base
+ SPI_SETUP1
);
112 static void spi100k_write_data(struct spi_master
*master
, int len
, int data
)
114 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
116 /* write 16-bit word, shifting 8-bit data if necessary */
122 spi100k_enable_clock(master
);
123 writew(data
, spi100k
->base
+ SPI_TX_MSB
);
125 writew(SPI_CTRL_SEN(0) |
126 SPI_CTRL_WORD_SIZE(len
) |
128 spi100k
->base
+ SPI_CTRL
);
130 /* Wait for bit ack send change */
131 while ((readw(spi100k
->base
+ SPI_STATUS
) & SPI_STATUS_WE
) != SPI_STATUS_WE
)
135 spi100k_disable_clock(master
);
138 static int spi100k_read_data(struct spi_master
*master
, int len
)
141 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
143 /* Always do at least 16 bits */
147 spi100k_enable_clock(master
);
148 writew(SPI_CTRL_SEN(0) |
149 SPI_CTRL_WORD_SIZE(len
) |
151 spi100k
->base
+ SPI_CTRL
);
153 while ((readw(spi100k
->base
+ SPI_STATUS
) & SPI_STATUS_RD
) != SPI_STATUS_RD
)
157 dataL
= readw(spi100k
->base
+ SPI_RX_LSB
);
158 dataH
= readw(spi100k
->base
+ SPI_RX_MSB
);
159 spi100k_disable_clock(master
);
164 static void spi100k_open(struct spi_master
*master
)
166 /* get control of SPI */
167 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
169 writew(SPI_SETUP1_INT_READ_ENABLE
|
170 SPI_SETUP1_INT_WRITE_ENABLE
|
171 SPI_SETUP1_CLOCK_DIVISOR(0), spi100k
->base
+ SPI_SETUP1
);
173 /* configure clock and interrupts */
174 writew(SPI_SETUP2_ACTIVE_EDGE_FALLING
|
175 SPI_SETUP2_NEGATIVE_LEVEL
|
176 SPI_SETUP2_LEVEL_TRIGGER
, spi100k
->base
+ SPI_SETUP2
);
179 static void omap1_spi100k_force_cs(struct omap1_spi100k
*spi100k
, int enable
)
182 writew(0x05fc, spi100k
->base
+ SPI_CTRL
);
184 writew(0x05fd, spi100k
->base
+ SPI_CTRL
);
188 omap1_spi100k_txrx_pio(struct spi_device
*spi
, struct spi_transfer
*xfer
)
190 struct omap1_spi100k_cs
*cs
= spi
->controller_state
;
191 unsigned int count
, c
;
196 word_len
= cs
->word_len
;
206 if (xfer
->tx_buf
!= NULL
)
207 spi100k_write_data(spi
->master
, word_len
, *tx
++);
208 if (xfer
->rx_buf
!= NULL
)
209 *rx
++ = spi100k_read_data(spi
->master
, word_len
);
211 } else if (word_len
<= 16) {
219 if (xfer
->tx_buf
!= NULL
)
220 spi100k_write_data(spi
->master
, word_len
, *tx
++);
221 if (xfer
->rx_buf
!= NULL
)
222 *rx
++ = spi100k_read_data(spi
->master
, word_len
);
224 } else if (word_len
<= 32) {
232 if (xfer
->tx_buf
!= NULL
)
233 spi100k_write_data(spi
->master
, word_len
, *tx
);
234 if (xfer
->rx_buf
!= NULL
)
235 *rx
= spi100k_read_data(spi
->master
, word_len
);
241 /* called only when no transfer is active to this device */
242 static int omap1_spi100k_setup_transfer(struct spi_device
*spi
,
243 struct spi_transfer
*t
)
245 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(spi
->master
);
246 struct omap1_spi100k_cs
*cs
= spi
->controller_state
;
250 word_len
= t
->bits_per_word
;
252 word_len
= spi
->bits_per_word
;
254 if (spi
->bits_per_word
> 32)
256 cs
->word_len
= word_len
;
258 /* SPI init before transfer */
259 writew(0x3e , spi100k
->base
+ SPI_SETUP1
);
260 writew(0x00 , spi100k
->base
+ SPI_STATUS
);
261 writew(0x3e , spi100k
->base
+ SPI_CTRL
);
266 /* the spi->mode bits understood by this driver: */
267 #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
269 static int omap1_spi100k_setup(struct spi_device
*spi
)
272 struct omap1_spi100k
*spi100k
;
273 struct omap1_spi100k_cs
*cs
= spi
->controller_state
;
275 spi100k
= spi_master_get_devdata(spi
->master
);
278 cs
= devm_kzalloc(&spi
->dev
, sizeof(*cs
), GFP_KERNEL
);
281 cs
->base
= spi100k
->base
+ spi
->chip_select
* 0x14;
282 spi
->controller_state
= cs
;
285 spi100k_open(spi
->master
);
287 clk_prepare_enable(spi100k
->ick
);
288 clk_prepare_enable(spi100k
->fck
);
290 ret
= omap1_spi100k_setup_transfer(spi
, NULL
);
292 clk_disable_unprepare(spi100k
->ick
);
293 clk_disable_unprepare(spi100k
->fck
);
298 static int omap1_spi100k_transfer_one_message(struct spi_master
*master
,
299 struct spi_message
*m
)
301 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
302 struct spi_device
*spi
= m
->spi
;
303 struct spi_transfer
*t
= NULL
;
307 list_for_each_entry(t
, &m
->transfers
, transfer_list
) {
308 if (t
->tx_buf
== NULL
&& t
->rx_buf
== NULL
&& t
->len
) {
312 status
= omap1_spi100k_setup_transfer(spi
, t
);
317 omap1_spi100k_force_cs(spi100k
, 1);
324 count
= omap1_spi100k_txrx_pio(spi
, t
);
325 m
->actual_length
+= count
;
327 if (count
!= t
->len
) {
334 udelay(t
->delay_usecs
);
336 /* ignore the "leave it on after last xfer" hint */
339 omap1_spi100k_force_cs(spi100k
, 0);
344 status
= omap1_spi100k_setup_transfer(spi
, NULL
);
347 omap1_spi100k_force_cs(spi100k
, 0);
351 spi_finalize_current_message(master
);
356 static int omap1_spi100k_probe(struct platform_device
*pdev
)
358 struct spi_master
*master
;
359 struct omap1_spi100k
*spi100k
;
365 master
= spi_alloc_master(&pdev
->dev
, sizeof(*spi100k
));
366 if (master
== NULL
) {
367 dev_dbg(&pdev
->dev
, "master allocation failed\n");
372 master
->bus_num
= pdev
->id
;
374 master
->setup
= omap1_spi100k_setup
;
375 master
->transfer_one_message
= omap1_spi100k_transfer_one_message
;
376 master
->num_chipselect
= 2;
377 master
->mode_bits
= MODEBITS
;
378 master
->bits_per_word_mask
= SPI_BPW_RANGE_MASK(4, 32);
379 master
->min_speed_hz
= OMAP1_SPI100K_MAX_FREQ
/(1<<16);
380 master
->max_speed_hz
= OMAP1_SPI100K_MAX_FREQ
;
381 master
->auto_runtime_pm
= true;
383 spi100k
= spi_master_get_devdata(master
);
386 * The memory region base address is taken as the platform_data.
387 * You should allocate this with ioremap() before initializing
390 spi100k
->base
= (void __iomem
*)dev_get_platdata(&pdev
->dev
);
392 spi100k
->ick
= devm_clk_get(&pdev
->dev
, "ick");
393 if (IS_ERR(spi100k
->ick
)) {
394 dev_dbg(&pdev
->dev
, "can't get spi100k_ick\n");
395 status
= PTR_ERR(spi100k
->ick
);
399 spi100k
->fck
= devm_clk_get(&pdev
->dev
, "fck");
400 if (IS_ERR(spi100k
->fck
)) {
401 dev_dbg(&pdev
->dev
, "can't get spi100k_fck\n");
402 status
= PTR_ERR(spi100k
->fck
);
406 status
= clk_prepare_enable(spi100k
->ick
);
408 dev_err(&pdev
->dev
, "failed to enable ick: %d\n", status
);
412 status
= clk_prepare_enable(spi100k
->fck
);
414 dev_err(&pdev
->dev
, "failed to enable fck: %d\n", status
);
418 pm_runtime_enable(&pdev
->dev
);
419 pm_runtime_set_active(&pdev
->dev
);
421 status
= devm_spi_register_master(&pdev
->dev
, master
);
428 clk_disable_unprepare(spi100k
->fck
);
430 clk_disable_unprepare(spi100k
->ick
);
432 spi_master_put(master
);
436 static int omap1_spi100k_remove(struct platform_device
*pdev
)
438 struct spi_master
*master
= spi_master_get(platform_get_drvdata(pdev
));
439 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
441 pm_runtime_disable(&pdev
->dev
);
443 clk_disable_unprepare(spi100k
->fck
);
444 clk_disable_unprepare(spi100k
->ick
);
450 static int omap1_spi100k_runtime_suspend(struct device
*dev
)
452 struct spi_master
*master
= spi_master_get(dev_get_drvdata(dev
));
453 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
455 clk_disable_unprepare(spi100k
->ick
);
456 clk_disable_unprepare(spi100k
->fck
);
461 static int omap1_spi100k_runtime_resume(struct device
*dev
)
463 struct spi_master
*master
= spi_master_get(dev_get_drvdata(dev
));
464 struct omap1_spi100k
*spi100k
= spi_master_get_devdata(master
);
467 ret
= clk_prepare_enable(spi100k
->ick
);
469 dev_err(dev
, "Failed to enable ick: %d\n", ret
);
473 ret
= clk_prepare_enable(spi100k
->fck
);
475 dev_err(dev
, "Failed to enable fck: %d\n", ret
);
476 clk_disable_unprepare(spi100k
->ick
);
484 static const struct dev_pm_ops omap1_spi100k_pm
= {
485 SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend
,
486 omap1_spi100k_runtime_resume
, NULL
)
489 static struct platform_driver omap1_spi100k_driver
= {
491 .name
= "omap1_spi100k",
492 .pm
= &omap1_spi100k_pm
,
494 .probe
= omap1_spi100k_probe
,
495 .remove
= omap1_spi100k_remove
,
498 module_platform_driver(omap1_spi100k_driver
);
500 MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver");
501 MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>");
502 MODULE_LICENSE("GPL");