2 * drivers/watchdog/shwdt.c
4 * Watchdog driver for integrated watchdog in the SuperH processors.
6 * Copyright (C) 2001 - 2012 Paul Mundt <lethal@linux-sh.org>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
13 * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
14 * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
16 * 19-Apr-2002 Rob Radez <rob@osinvestor.com>
17 * Added expect close support, made emulated timeout runtime changeable
18 * general cleanups, add some ioctls
21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
23 #include <linux/module.h>
24 #include <linux/moduleparam.h>
25 #include <linux/platform_device.h>
26 #include <linux/init.h>
27 #include <linux/types.h>
28 #include <linux/spinlock.h>
29 #include <linux/watchdog.h>
30 #include <linux/pm_runtime.h>
33 #include <linux/slab.h>
35 #include <linux/clk.h>
36 #include <linux/err.h>
37 #include <asm/watchdog.h>
39 #define DRV_NAME "sh-wdt"
42 * Default clock division ratio is 5.25 msecs. For an additional table of
43 * values, consult the asm-sh/watchdog.h. Overload this at module load
46 * In order for this to work reliably we need to have HZ set to 1000 or
47 * something quite higher than 100 (or we need a proper high-res timer
48 * implementation that will deal with this properly), otherwise the 10ms
49 * resolution of a jiffy is enough to trigger the overflow. For things like
50 * the SH-4 and SH-5, this isn't necessarily that big of a problem, though
51 * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
54 * As a result of this timing problem, the only modes that are particularly
55 * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
56 * overflow periods respectively.
58 * Also, since we can't really expect userspace to be responsive enough
59 * before the overflow happens, we maintain two separate timers .. One in
60 * the kernel for clearing out WOVF every 2ms or so (again, this depends on
61 * HZ == 1000), and another for monitoring userspace writes to the WDT device.
63 * As such, we currently use a configurable heartbeat interval which defaults
64 * to 30s. In this case, the userspace daemon is only responsible for periodic
65 * writes to the device before the next heartbeat is scheduled. If the daemon
66 * misses its deadline, the kernel timer will allow the WDT to overflow.
68 static int clock_division_ratio
= WTCSR_CKS_4096
;
69 #define next_ping_period(cks) (jiffies + msecs_to_jiffies(cks - 4))
71 #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
72 static int heartbeat
= WATCHDOG_HEARTBEAT
; /* in seconds */
73 static bool nowayout
= WATCHDOG_NOWAYOUT
;
74 static unsigned long next_heartbeat
;
82 struct timer_list timer
;
85 static int sh_wdt_start(struct watchdog_device
*wdt_dev
)
87 struct sh_wdt
*wdt
= watchdog_get_drvdata(wdt_dev
);
91 pm_runtime_get_sync(wdt
->dev
);
94 spin_lock_irqsave(&wdt
->lock
, flags
);
96 next_heartbeat
= jiffies
+ (heartbeat
* HZ
);
97 mod_timer(&wdt
->timer
, next_ping_period(clock_division_ratio
));
99 csr
= sh_wdt_read_csr();
100 csr
|= WTCSR_WT
| clock_division_ratio
;
101 sh_wdt_write_csr(csr
);
106 * These processors have a bit of an inconsistent initialization
107 * process.. starting with SH-3, RSTS was moved to WTCSR, and the
108 * RSTCSR register was removed.
110 * On the SH-2 however, in addition with bits being in different
111 * locations, we must deal with RSTCSR outright..
113 csr
= sh_wdt_read_csr();
116 sh_wdt_write_csr(csr
);
118 #ifdef CONFIG_CPU_SH2
119 csr
= sh_wdt_read_rstcsr();
121 sh_wdt_write_rstcsr(csr
);
123 spin_unlock_irqrestore(&wdt
->lock
, flags
);
128 static int sh_wdt_stop(struct watchdog_device
*wdt_dev
)
130 struct sh_wdt
*wdt
= watchdog_get_drvdata(wdt_dev
);
134 spin_lock_irqsave(&wdt
->lock
, flags
);
136 del_timer(&wdt
->timer
);
138 csr
= sh_wdt_read_csr();
140 sh_wdt_write_csr(csr
);
142 spin_unlock_irqrestore(&wdt
->lock
, flags
);
144 clk_disable(wdt
->clk
);
145 pm_runtime_put_sync(wdt
->dev
);
150 static int sh_wdt_keepalive(struct watchdog_device
*wdt_dev
)
152 struct sh_wdt
*wdt
= watchdog_get_drvdata(wdt_dev
);
155 spin_lock_irqsave(&wdt
->lock
, flags
);
156 next_heartbeat
= jiffies
+ (heartbeat
* HZ
);
157 spin_unlock_irqrestore(&wdt
->lock
, flags
);
162 static int sh_wdt_set_heartbeat(struct watchdog_device
*wdt_dev
, unsigned t
)
164 struct sh_wdt
*wdt
= watchdog_get_drvdata(wdt_dev
);
167 if (unlikely(t
< 1 || t
> 3600)) /* arbitrary upper limit */
170 spin_lock_irqsave(&wdt
->lock
, flags
);
172 wdt_dev
->timeout
= t
;
173 spin_unlock_irqrestore(&wdt
->lock
, flags
);
178 static void sh_wdt_ping(struct timer_list
*t
)
180 struct sh_wdt
*wdt
= from_timer(wdt
, t
, timer
);
183 spin_lock_irqsave(&wdt
->lock
, flags
);
184 if (time_before(jiffies
, next_heartbeat
)) {
187 csr
= sh_wdt_read_csr();
189 sh_wdt_write_csr(csr
);
193 mod_timer(&wdt
->timer
, next_ping_period(clock_division_ratio
));
195 dev_warn(wdt
->dev
, "Heartbeat lost! Will not ping "
197 spin_unlock_irqrestore(&wdt
->lock
, flags
);
200 static const struct watchdog_info sh_wdt_info
= {
201 .options
= WDIOF_KEEPALIVEPING
| WDIOF_SETTIMEOUT
|
203 .firmware_version
= 1,
204 .identity
= "SH WDT",
207 static const struct watchdog_ops sh_wdt_ops
= {
208 .owner
= THIS_MODULE
,
209 .start
= sh_wdt_start
,
211 .ping
= sh_wdt_keepalive
,
212 .set_timeout
= sh_wdt_set_heartbeat
,
215 static struct watchdog_device sh_wdt_dev
= {
216 .info
= &sh_wdt_info
,
220 static int sh_wdt_probe(struct platform_device
*pdev
)
223 struct resource
*res
;
227 * As this driver only covers the global watchdog case, reject
228 * any attempts to register per-CPU watchdogs.
233 wdt
= devm_kzalloc(&pdev
->dev
, sizeof(struct sh_wdt
), GFP_KERNEL
);
237 wdt
->dev
= &pdev
->dev
;
239 wdt
->clk
= devm_clk_get(&pdev
->dev
, NULL
);
240 if (IS_ERR(wdt
->clk
)) {
242 * Clock framework support is optional, continue on
243 * anyways if we don't find a matching clock.
248 res
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
249 wdt
->base
= devm_ioremap_resource(wdt
->dev
, res
);
250 if (IS_ERR(wdt
->base
))
251 return PTR_ERR(wdt
->base
);
253 watchdog_set_nowayout(&sh_wdt_dev
, nowayout
);
254 watchdog_set_drvdata(&sh_wdt_dev
, wdt
);
255 sh_wdt_dev
.parent
= &pdev
->dev
;
257 spin_lock_init(&wdt
->lock
);
259 rc
= sh_wdt_set_heartbeat(&sh_wdt_dev
, heartbeat
);
261 /* Default timeout if invalid */
262 sh_wdt_set_heartbeat(&sh_wdt_dev
, WATCHDOG_HEARTBEAT
);
265 "heartbeat value must be 1<=x<=3600, using %d\n",
269 dev_info(&pdev
->dev
, "configured with heartbeat=%d sec (nowayout=%d)\n",
270 sh_wdt_dev
.timeout
, nowayout
);
272 rc
= watchdog_register_device(&sh_wdt_dev
);
274 dev_err(&pdev
->dev
, "Can't register watchdog (err=%d)\n", rc
);
278 timer_setup(&wdt
->timer
, sh_wdt_ping
, 0);
279 wdt
->timer
.expires
= next_ping_period(clock_division_ratio
);
281 dev_info(&pdev
->dev
, "initialized.\n");
283 pm_runtime_enable(&pdev
->dev
);
288 static int sh_wdt_remove(struct platform_device
*pdev
)
290 watchdog_unregister_device(&sh_wdt_dev
);
292 pm_runtime_disable(&pdev
->dev
);
297 static void sh_wdt_shutdown(struct platform_device
*pdev
)
299 sh_wdt_stop(&sh_wdt_dev
);
302 static struct platform_driver sh_wdt_driver
= {
307 .probe
= sh_wdt_probe
,
308 .remove
= sh_wdt_remove
,
309 .shutdown
= sh_wdt_shutdown
,
312 static int __init
sh_wdt_init(void)
314 if (unlikely(clock_division_ratio
< 0x5 ||
315 clock_division_ratio
> 0x7)) {
316 clock_division_ratio
= WTCSR_CKS_4096
;
318 pr_info("divisor must be 0x5<=x<=0x7, using %d\n",
319 clock_division_ratio
);
322 return platform_driver_register(&sh_wdt_driver
);
325 static void __exit
sh_wdt_exit(void)
327 platform_driver_unregister(&sh_wdt_driver
);
329 module_init(sh_wdt_init
);
330 module_exit(sh_wdt_exit
);
332 MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
333 MODULE_DESCRIPTION("SuperH watchdog driver");
334 MODULE_LICENSE("GPL");
335 MODULE_ALIAS("platform:" DRV_NAME
);
337 module_param(clock_division_ratio
, int, 0);
338 MODULE_PARM_DESC(clock_division_ratio
,
339 "Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
340 "to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096
) ")");
342 module_param(heartbeat
, int, 0);
343 MODULE_PARM_DESC(heartbeat
,
344 "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
345 __MODULE_STRING(WATCHDOG_HEARTBEAT
) ")");
347 module_param(nowayout
, bool, 0);
348 MODULE_PARM_DESC(nowayout
,
349 "Watchdog cannot be stopped once started (default="
350 __MODULE_STRING(WATCHDOG_NOWAYOUT
) ")");