2 * linux/fs/ext4/indirect.c
6 * linux/fs/ext4/inode.c
8 * Copyright (C) 1992, 1993, 1994, 1995
9 * Remy Card (card@masi.ibp.fr)
10 * Laboratoire MASI - Institut Blaise Pascal
11 * Universite Pierre et Marie Curie (Paris VI)
15 * linux/fs/minix/inode.c
17 * Copyright (C) 1991, 1992 Linus Torvalds
19 * Goal-directed block allocation by Stephen Tweedie
20 * (sct@redhat.com), 1993, 1998
23 #include <linux/aio.h>
24 #include "ext4_jbd2.h"
27 #include <trace/events/ext4.h>
32 struct buffer_head
*bh
;
35 static inline void add_chain(Indirect
*p
, struct buffer_head
*bh
, __le32
*v
)
42 * ext4_block_to_path - parse the block number into array of offsets
43 * @inode: inode in question (we are only interested in its superblock)
44 * @i_block: block number to be parsed
45 * @offsets: array to store the offsets in
46 * @boundary: set this non-zero if the referred-to block is likely to be
47 * followed (on disk) by an indirect block.
49 * To store the locations of file's data ext4 uses a data structure common
50 * for UNIX filesystems - tree of pointers anchored in the inode, with
51 * data blocks at leaves and indirect blocks in intermediate nodes.
52 * This function translates the block number into path in that tree -
53 * return value is the path length and @offsets[n] is the offset of
54 * pointer to (n+1)th node in the nth one. If @block is out of range
55 * (negative or too large) warning is printed and zero returned.
57 * Note: function doesn't find node addresses, so no IO is needed. All
58 * we need to know is the capacity of indirect blocks (taken from the
63 * Portability note: the last comparison (check that we fit into triple
64 * indirect block) is spelled differently, because otherwise on an
65 * architecture with 32-bit longs and 8Kb pages we might get into trouble
66 * if our filesystem had 8Kb blocks. We might use long long, but that would
67 * kill us on x86. Oh, well, at least the sign propagation does not matter -
68 * i_block would have to be negative in the very beginning, so we would not
72 static int ext4_block_to_path(struct inode
*inode
,
74 ext4_lblk_t offsets
[4], int *boundary
)
76 int ptrs
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
77 int ptrs_bits
= EXT4_ADDR_PER_BLOCK_BITS(inode
->i_sb
);
78 const long direct_blocks
= EXT4_NDIR_BLOCKS
,
79 indirect_blocks
= ptrs
,
80 double_blocks
= (1 << (ptrs_bits
* 2));
84 if (i_block
< direct_blocks
) {
85 offsets
[n
++] = i_block
;
86 final
= direct_blocks
;
87 } else if ((i_block
-= direct_blocks
) < indirect_blocks
) {
88 offsets
[n
++] = EXT4_IND_BLOCK
;
89 offsets
[n
++] = i_block
;
91 } else if ((i_block
-= indirect_blocks
) < double_blocks
) {
92 offsets
[n
++] = EXT4_DIND_BLOCK
;
93 offsets
[n
++] = i_block
>> ptrs_bits
;
94 offsets
[n
++] = i_block
& (ptrs
- 1);
96 } else if (((i_block
-= double_blocks
) >> (ptrs_bits
* 2)) < ptrs
) {
97 offsets
[n
++] = EXT4_TIND_BLOCK
;
98 offsets
[n
++] = i_block
>> (ptrs_bits
* 2);
99 offsets
[n
++] = (i_block
>> ptrs_bits
) & (ptrs
- 1);
100 offsets
[n
++] = i_block
& (ptrs
- 1);
103 ext4_warning(inode
->i_sb
, "block %lu > max in inode %lu",
104 i_block
+ direct_blocks
+
105 indirect_blocks
+ double_blocks
, inode
->i_ino
);
108 *boundary
= final
- 1 - (i_block
& (ptrs
- 1));
113 * ext4_get_branch - read the chain of indirect blocks leading to data
114 * @inode: inode in question
115 * @depth: depth of the chain (1 - direct pointer, etc.)
116 * @offsets: offsets of pointers in inode/indirect blocks
117 * @chain: place to store the result
118 * @err: here we store the error value
120 * Function fills the array of triples <key, p, bh> and returns %NULL
121 * if everything went OK or the pointer to the last filled triple
122 * (incomplete one) otherwise. Upon the return chain[i].key contains
123 * the number of (i+1)-th block in the chain (as it is stored in memory,
124 * i.e. little-endian 32-bit), chain[i].p contains the address of that
125 * number (it points into struct inode for i==0 and into the bh->b_data
126 * for i>0) and chain[i].bh points to the buffer_head of i-th indirect
127 * block for i>0 and NULL for i==0. In other words, it holds the block
128 * numbers of the chain, addresses they were taken from (and where we can
129 * verify that chain did not change) and buffer_heads hosting these
132 * Function stops when it stumbles upon zero pointer (absent block)
133 * (pointer to last triple returned, *@err == 0)
134 * or when it gets an IO error reading an indirect block
135 * (ditto, *@err == -EIO)
136 * or when it reads all @depth-1 indirect blocks successfully and finds
137 * the whole chain, all way to the data (returns %NULL, *err == 0).
139 * Need to be called with
140 * down_read(&EXT4_I(inode)->i_data_sem)
142 static Indirect
*ext4_get_branch(struct inode
*inode
, int depth
,
143 ext4_lblk_t
*offsets
,
144 Indirect chain
[4], int *err
)
146 struct super_block
*sb
= inode
->i_sb
;
148 struct buffer_head
*bh
;
152 /* i_data is not going away, no lock needed */
153 add_chain(chain
, NULL
, EXT4_I(inode
)->i_data
+ *offsets
);
157 bh
= sb_getblk(sb
, le32_to_cpu(p
->key
));
163 if (!bh_uptodate_or_lock(bh
)) {
164 if (bh_submit_read(bh
) < 0) {
168 /* validate block references */
169 if (ext4_check_indirect_blockref(inode
, bh
)) {
175 add_chain(++p
, bh
, (__le32
*)bh
->b_data
+ *++offsets
);
189 * ext4_find_near - find a place for allocation with sufficient locality
191 * @ind: descriptor of indirect block.
193 * This function returns the preferred place for block allocation.
194 * It is used when heuristic for sequential allocation fails.
196 * + if there is a block to the left of our position - allocate near it.
197 * + if pointer will live in indirect block - allocate near that block.
198 * + if pointer will live in inode - allocate in the same
201 * In the latter case we colour the starting block by the callers PID to
202 * prevent it from clashing with concurrent allocations for a different inode
203 * in the same block group. The PID is used here so that functionally related
204 * files will be close-by on-disk.
206 * Caller must make sure that @ind is valid and will stay that way.
208 static ext4_fsblk_t
ext4_find_near(struct inode
*inode
, Indirect
*ind
)
210 struct ext4_inode_info
*ei
= EXT4_I(inode
);
211 __le32
*start
= ind
->bh
? (__le32
*) ind
->bh
->b_data
: ei
->i_data
;
214 /* Try to find previous block */
215 for (p
= ind
->p
- 1; p
>= start
; p
--) {
217 return le32_to_cpu(*p
);
220 /* No such thing, so let's try location of indirect block */
222 return ind
->bh
->b_blocknr
;
225 * It is going to be referred to from the inode itself? OK, just put it
226 * into the same cylinder group then.
228 return ext4_inode_to_goal_block(inode
);
232 * ext4_find_goal - find a preferred place for allocation.
234 * @block: block we want
235 * @partial: pointer to the last triple within a chain
237 * Normally this function find the preferred place for block allocation,
239 * Because this is only used for non-extent files, we limit the block nr
242 static ext4_fsblk_t
ext4_find_goal(struct inode
*inode
, ext4_lblk_t block
,
248 * XXX need to get goal block from mballoc's data structures
251 goal
= ext4_find_near(inode
, partial
);
252 goal
= goal
& EXT4_MAX_BLOCK_FILE_PHYS
;
257 * ext4_blks_to_allocate - Look up the block map and count the number
258 * of direct blocks need to be allocated for the given branch.
260 * @branch: chain of indirect blocks
261 * @k: number of blocks need for indirect blocks
262 * @blks: number of data blocks to be mapped.
263 * @blocks_to_boundary: the offset in the indirect block
265 * return the total number of blocks to be allocate, including the
266 * direct and indirect blocks.
268 static int ext4_blks_to_allocate(Indirect
*branch
, int k
, unsigned int blks
,
269 int blocks_to_boundary
)
271 unsigned int count
= 0;
274 * Simple case, [t,d]Indirect block(s) has not allocated yet
275 * then it's clear blocks on that path have not allocated
278 /* right now we don't handle cross boundary allocation */
279 if (blks
< blocks_to_boundary
+ 1)
282 count
+= blocks_to_boundary
+ 1;
287 while (count
< blks
&& count
<= blocks_to_boundary
&&
288 le32_to_cpu(*(branch
[0].p
+ count
)) == 0) {
295 * ext4_alloc_branch - allocate and set up a chain of blocks.
296 * @handle: handle for this transaction
298 * @indirect_blks: number of allocated indirect blocks
299 * @blks: number of allocated direct blocks
300 * @goal: preferred place for allocation
301 * @offsets: offsets (in the blocks) to store the pointers to next.
302 * @branch: place to store the chain in.
304 * This function allocates blocks, zeroes out all but the last one,
305 * links them into chain and (if we are synchronous) writes them to disk.
306 * In other words, it prepares a branch that can be spliced onto the
307 * inode. It stores the information about that chain in the branch[], in
308 * the same format as ext4_get_branch() would do. We are calling it after
309 * we had read the existing part of chain and partial points to the last
310 * triple of that (one with zero ->key). Upon the exit we have the same
311 * picture as after the successful ext4_get_block(), except that in one
312 * place chain is disconnected - *branch->p is still zero (we did not
313 * set the last link), but branch->key contains the number that should
314 * be placed into *branch->p to fill that gap.
316 * If allocation fails we free all blocks we've allocated (and forget
317 * their buffer_heads) and return the error value the from failed
318 * ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain
319 * as described above and return 0.
321 static int ext4_alloc_branch(handle_t
*handle
, struct inode
*inode
,
322 ext4_lblk_t iblock
, int indirect_blks
,
323 int *blks
, ext4_fsblk_t goal
,
324 ext4_lblk_t
*offsets
, Indirect
*branch
)
326 struct ext4_allocation_request ar
;
327 struct buffer_head
* bh
;
328 ext4_fsblk_t b
, new_blocks
[4];
330 int i
, j
, err
, len
= 1;
333 * Set up for the direct block allocation
335 memset(&ar
, 0, sizeof(ar
));
339 if (S_ISREG(inode
->i_mode
))
340 ar
.flags
= EXT4_MB_HINT_DATA
;
342 for (i
= 0; i
<= indirect_blks
; i
++) {
343 if (i
== indirect_blks
) {
345 new_blocks
[i
] = ext4_mb_new_blocks(handle
, &ar
, &err
);
347 goal
= new_blocks
[i
] = ext4_new_meta_blocks(handle
, inode
,
348 goal
, 0, NULL
, &err
);
353 branch
[i
].key
= cpu_to_le32(new_blocks
[i
]);
357 bh
= branch
[i
].bh
= sb_getblk(inode
->i_sb
, new_blocks
[i
-1]);
363 BUFFER_TRACE(bh
, "call get_create_access");
364 err
= ext4_journal_get_create_access(handle
, bh
);
370 memset(bh
->b_data
, 0, bh
->b_size
);
371 p
= branch
[i
].p
= (__le32
*) bh
->b_data
+ offsets
[i
];
374 if (i
== indirect_blks
)
376 for (j
= 0; j
< len
; j
++)
377 *p
++ = cpu_to_le32(b
++);
379 BUFFER_TRACE(bh
, "marking uptodate");
380 set_buffer_uptodate(bh
);
383 BUFFER_TRACE(bh
, "call ext4_handle_dirty_metadata");
384 err
= ext4_handle_dirty_metadata(handle
, inode
, bh
);
391 for (; i
>= 0; i
--) {
392 if (i
!= indirect_blks
&& branch
[i
].bh
)
393 ext4_forget(handle
, 1, inode
, branch
[i
].bh
,
394 branch
[i
].bh
->b_blocknr
);
395 ext4_free_blocks(handle
, inode
, NULL
, new_blocks
[i
],
396 (i
== indirect_blks
) ? ar
.len
: 1, 0);
402 * ext4_splice_branch - splice the allocated branch onto inode.
403 * @handle: handle for this transaction
405 * @block: (logical) number of block we are adding
406 * @chain: chain of indirect blocks (with a missing link - see
408 * @where: location of missing link
409 * @num: number of indirect blocks we are adding
410 * @blks: number of direct blocks we are adding
412 * This function fills the missing link and does all housekeeping needed in
413 * inode (->i_blocks, etc.). In case of success we end up with the full
414 * chain to new block and return 0.
416 static int ext4_splice_branch(handle_t
*handle
, struct inode
*inode
,
417 ext4_lblk_t block
, Indirect
*where
, int num
,
422 ext4_fsblk_t current_block
;
425 * If we're splicing into a [td]indirect block (as opposed to the
426 * inode) then we need to get write access to the [td]indirect block
430 BUFFER_TRACE(where
->bh
, "get_write_access");
431 err
= ext4_journal_get_write_access(handle
, where
->bh
);
437 *where
->p
= where
->key
;
440 * Update the host buffer_head or inode to point to more just allocated
441 * direct blocks blocks
443 if (num
== 0 && blks
> 1) {
444 current_block
= le32_to_cpu(where
->key
) + 1;
445 for (i
= 1; i
< blks
; i
++)
446 *(where
->p
+ i
) = cpu_to_le32(current_block
++);
449 /* We are done with atomic stuff, now do the rest of housekeeping */
450 /* had we spliced it onto indirect block? */
453 * If we spliced it onto an indirect block, we haven't
454 * altered the inode. Note however that if it is being spliced
455 * onto an indirect block at the very end of the file (the
456 * file is growing) then we *will* alter the inode to reflect
457 * the new i_size. But that is not done here - it is done in
458 * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode.
460 jbd_debug(5, "splicing indirect only\n");
461 BUFFER_TRACE(where
->bh
, "call ext4_handle_dirty_metadata");
462 err
= ext4_handle_dirty_metadata(handle
, inode
, where
->bh
);
467 * OK, we spliced it into the inode itself on a direct block.
469 ext4_mark_inode_dirty(handle
, inode
);
470 jbd_debug(5, "splicing direct\n");
475 for (i
= 1; i
<= num
; i
++) {
477 * branch[i].bh is newly allocated, so there is no
478 * need to revoke the block, which is why we don't
479 * need to set EXT4_FREE_BLOCKS_METADATA.
481 ext4_free_blocks(handle
, inode
, where
[i
].bh
, 0, 1,
482 EXT4_FREE_BLOCKS_FORGET
);
484 ext4_free_blocks(handle
, inode
, NULL
, le32_to_cpu(where
[num
].key
),
491 * The ext4_ind_map_blocks() function handles non-extents inodes
492 * (i.e., using the traditional indirect/double-indirect i_blocks
493 * scheme) for ext4_map_blocks().
495 * Allocation strategy is simple: if we have to allocate something, we will
496 * have to go the whole way to leaf. So let's do it before attaching anything
497 * to tree, set linkage between the newborn blocks, write them if sync is
498 * required, recheck the path, free and repeat if check fails, otherwise
499 * set the last missing link (that will protect us from any truncate-generated
500 * removals - all blocks on the path are immune now) and possibly force the
501 * write on the parent block.
502 * That has a nice additional property: no special recovery from the failed
503 * allocations is needed - we simply release blocks and do not touch anything
504 * reachable from inode.
506 * `handle' can be NULL if create == 0.
508 * return > 0, # of blocks mapped or allocated.
509 * return = 0, if plain lookup failed.
510 * return < 0, error case.
512 * The ext4_ind_get_blocks() function should be called with
513 * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem
514 * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or
515 * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system
518 int ext4_ind_map_blocks(handle_t
*handle
, struct inode
*inode
,
519 struct ext4_map_blocks
*map
,
523 ext4_lblk_t offsets
[4];
528 int blocks_to_boundary
= 0;
531 ext4_fsblk_t first_block
= 0;
533 trace_ext4_ind_map_blocks_enter(inode
, map
->m_lblk
, map
->m_len
, flags
);
534 J_ASSERT(!(ext4_test_inode_flag(inode
, EXT4_INODE_EXTENTS
)));
535 J_ASSERT(handle
!= NULL
|| (flags
& EXT4_GET_BLOCKS_CREATE
) == 0);
536 depth
= ext4_block_to_path(inode
, map
->m_lblk
, offsets
,
537 &blocks_to_boundary
);
542 partial
= ext4_get_branch(inode
, depth
, offsets
, chain
, &err
);
544 /* Simplest case - block found, no allocation needed */
546 first_block
= le32_to_cpu(chain
[depth
- 1].key
);
549 while (count
< map
->m_len
&& count
<= blocks_to_boundary
) {
552 blk
= le32_to_cpu(*(chain
[depth
-1].p
+ count
));
554 if (blk
== first_block
+ count
)
562 /* Next simple case - plain lookup or failed read of indirect block */
563 if ((flags
& EXT4_GET_BLOCKS_CREATE
) == 0 || err
== -EIO
)
567 * Okay, we need to do block allocation.
569 if (EXT4_HAS_RO_COMPAT_FEATURE(inode
->i_sb
,
570 EXT4_FEATURE_RO_COMPAT_BIGALLOC
)) {
571 EXT4_ERROR_INODE(inode
, "Can't allocate blocks for "
572 "non-extent mapped inodes with bigalloc");
576 goal
= ext4_find_goal(inode
, map
->m_lblk
, partial
);
578 /* the number of blocks need to allocate for [d,t]indirect blocks */
579 indirect_blks
= (chain
+ depth
) - partial
- 1;
582 * Next look up the indirect map to count the totoal number of
583 * direct blocks to allocate for this branch.
585 count
= ext4_blks_to_allocate(partial
, indirect_blks
,
586 map
->m_len
, blocks_to_boundary
);
588 * Block out ext4_truncate while we alter the tree
590 err
= ext4_alloc_branch(handle
, inode
, map
->m_lblk
, indirect_blks
,
592 offsets
+ (partial
- chain
), partial
);
595 * The ext4_splice_branch call will free and forget any buffers
596 * on the new chain if there is a failure, but that risks using
597 * up transaction credits, especially for bitmaps where the
598 * credits cannot be returned. Can we handle this somehow? We
599 * may need to return -EAGAIN upwards in the worst case. --sct
602 err
= ext4_splice_branch(handle
, inode
, map
->m_lblk
,
603 partial
, indirect_blks
, count
);
607 map
->m_flags
|= EXT4_MAP_NEW
;
609 ext4_update_inode_fsync_trans(handle
, inode
, 1);
611 map
->m_flags
|= EXT4_MAP_MAPPED
;
612 map
->m_pblk
= le32_to_cpu(chain
[depth
-1].key
);
614 if (count
> blocks_to_boundary
)
615 map
->m_flags
|= EXT4_MAP_BOUNDARY
;
617 /* Clean up and exit */
618 partial
= chain
+ depth
- 1; /* the whole chain */
620 while (partial
> chain
) {
621 BUFFER_TRACE(partial
->bh
, "call brelse");
626 trace_ext4_ind_map_blocks_exit(inode
, flags
, map
, err
);
631 * O_DIRECT for ext3 (or indirect map) based files
633 * If the O_DIRECT write will extend the file then add this inode to the
634 * orphan list. So recovery will truncate it back to the original size
635 * if the machine crashes during the write.
637 * If the O_DIRECT write is intantiating holes inside i_size and the machine
638 * crashes then stale disk data _may_ be exposed inside the file. But current
639 * VFS code falls back into buffered path in that case so we are safe.
641 ssize_t
ext4_ind_direct_IO(int rw
, struct kiocb
*iocb
,
642 const struct iovec
*iov
, loff_t offset
,
643 unsigned long nr_segs
)
645 struct file
*file
= iocb
->ki_filp
;
646 struct inode
*inode
= file
->f_mapping
->host
;
647 struct ext4_inode_info
*ei
= EXT4_I(inode
);
651 size_t count
= iov_length(iov
, nr_segs
);
655 loff_t final_size
= offset
+ count
;
657 if (final_size
> inode
->i_size
) {
658 /* Credits for sb + inode write */
659 handle
= ext4_journal_start(inode
, EXT4_HT_INODE
, 2);
660 if (IS_ERR(handle
)) {
661 ret
= PTR_ERR(handle
);
664 ret
= ext4_orphan_add(handle
, inode
);
666 ext4_journal_stop(handle
);
670 ei
->i_disksize
= inode
->i_size
;
671 ext4_journal_stop(handle
);
676 if (rw
== READ
&& ext4_should_dioread_nolock(inode
)) {
678 * Nolock dioread optimization may be dynamically disabled
679 * via ext4_inode_block_unlocked_dio(). Check inode's state
680 * while holding extra i_dio_count ref.
682 atomic_inc(&inode
->i_dio_count
);
684 if (unlikely(ext4_test_inode_state(inode
,
685 EXT4_STATE_DIOREAD_LOCK
))) {
686 inode_dio_done(inode
);
689 ret
= __blockdev_direct_IO(rw
, iocb
, inode
,
690 inode
->i_sb
->s_bdev
, iov
,
692 ext4_get_block
, NULL
, NULL
, 0);
693 inode_dio_done(inode
);
696 ret
= blockdev_direct_IO(rw
, iocb
, inode
, iov
,
697 offset
, nr_segs
, ext4_get_block
);
699 if (unlikely((rw
& WRITE
) && ret
< 0)) {
700 loff_t isize
= i_size_read(inode
);
701 loff_t end
= offset
+ iov_length(iov
, nr_segs
);
704 ext4_truncate_failed_write(inode
);
707 if (ret
== -ENOSPC
&& ext4_should_retry_alloc(inode
->i_sb
, &retries
))
713 /* Credits for sb + inode write */
714 handle
= ext4_journal_start(inode
, EXT4_HT_INODE
, 2);
715 if (IS_ERR(handle
)) {
716 /* This is really bad luck. We've written the data
717 * but cannot extend i_size. Bail out and pretend
718 * the write failed... */
719 ret
= PTR_ERR(handle
);
721 ext4_orphan_del(NULL
, inode
);
726 ext4_orphan_del(handle
, inode
);
728 loff_t end
= offset
+ ret
;
729 if (end
> inode
->i_size
) {
730 ei
->i_disksize
= end
;
731 i_size_write(inode
, end
);
733 * We're going to return a positive `ret'
734 * here due to non-zero-length I/O, so there's
735 * no way of reporting error returns from
736 * ext4_mark_inode_dirty() to userspace. So
739 ext4_mark_inode_dirty(handle
, inode
);
742 err
= ext4_journal_stop(handle
);
751 * Calculate the number of metadata blocks need to reserve
752 * to allocate a new block at @lblocks for non extent file based file
754 int ext4_ind_calc_metadata_amount(struct inode
*inode
, sector_t lblock
)
756 struct ext4_inode_info
*ei
= EXT4_I(inode
);
757 sector_t dind_mask
= ~((sector_t
)EXT4_ADDR_PER_BLOCK(inode
->i_sb
) - 1);
760 if (lblock
< EXT4_NDIR_BLOCKS
)
763 lblock
-= EXT4_NDIR_BLOCKS
;
765 if (ei
->i_da_metadata_calc_len
&&
766 (lblock
& dind_mask
) == ei
->i_da_metadata_calc_last_lblock
) {
767 ei
->i_da_metadata_calc_len
++;
770 ei
->i_da_metadata_calc_last_lblock
= lblock
& dind_mask
;
771 ei
->i_da_metadata_calc_len
= 1;
772 blk_bits
= order_base_2(lblock
);
773 return (blk_bits
/ EXT4_ADDR_PER_BLOCK_BITS(inode
->i_sb
)) + 1;
777 * Calculate number of indirect blocks touched by mapping @nrblocks logically
780 int ext4_ind_trans_blocks(struct inode
*inode
, int nrblocks
)
783 * With N contiguous data blocks, we need at most
784 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks,
785 * 2 dindirect blocks, and 1 tindirect block
787 return DIV_ROUND_UP(nrblocks
, EXT4_ADDR_PER_BLOCK(inode
->i_sb
)) + 4;
791 * Truncate transactions can be complex and absolutely huge. So we need to
792 * be able to restart the transaction at a conventient checkpoint to make
793 * sure we don't overflow the journal.
795 * Try to extend this transaction for the purposes of truncation. If
796 * extend fails, we need to propagate the failure up and restart the
797 * transaction in the top-level truncate loop. --sct
799 * Returns 0 if we managed to create more room. If we can't create more
800 * room, and the transaction must be restarted we return 1.
802 static int try_to_extend_transaction(handle_t
*handle
, struct inode
*inode
)
804 if (!ext4_handle_valid(handle
))
806 if (ext4_handle_has_enough_credits(handle
, EXT4_RESERVE_TRANS_BLOCKS
+1))
808 if (!ext4_journal_extend(handle
, ext4_blocks_for_truncate(inode
)))
814 * Probably it should be a library function... search for first non-zero word
815 * or memcmp with zero_page, whatever is better for particular architecture.
818 static inline int all_zeroes(__le32
*p
, __le32
*q
)
827 * ext4_find_shared - find the indirect blocks for partial truncation.
828 * @inode: inode in question
829 * @depth: depth of the affected branch
830 * @offsets: offsets of pointers in that branch (see ext4_block_to_path)
831 * @chain: place to store the pointers to partial indirect blocks
832 * @top: place to the (detached) top of branch
834 * This is a helper function used by ext4_truncate().
836 * When we do truncate() we may have to clean the ends of several
837 * indirect blocks but leave the blocks themselves alive. Block is
838 * partially truncated if some data below the new i_size is referred
839 * from it (and it is on the path to the first completely truncated
840 * data block, indeed). We have to free the top of that path along
841 * with everything to the right of the path. Since no allocation
842 * past the truncation point is possible until ext4_truncate()
843 * finishes, we may safely do the latter, but top of branch may
844 * require special attention - pageout below the truncation point
845 * might try to populate it.
847 * We atomically detach the top of branch from the tree, store the
848 * block number of its root in *@top, pointers to buffer_heads of
849 * partially truncated blocks - in @chain[].bh and pointers to
850 * their last elements that should not be removed - in
851 * @chain[].p. Return value is the pointer to last filled element
854 * The work left to caller to do the actual freeing of subtrees:
855 * a) free the subtree starting from *@top
856 * b) free the subtrees whose roots are stored in
857 * (@chain[i].p+1 .. end of @chain[i].bh->b_data)
858 * c) free the subtrees growing from the inode past the @chain[0].
859 * (no partially truncated stuff there). */
861 static Indirect
*ext4_find_shared(struct inode
*inode
, int depth
,
862 ext4_lblk_t offsets
[4], Indirect chain
[4],
865 Indirect
*partial
, *p
;
869 /* Make k index the deepest non-null offset + 1 */
870 for (k
= depth
; k
> 1 && !offsets
[k
-1]; k
--)
872 partial
= ext4_get_branch(inode
, k
, offsets
, chain
, &err
);
873 /* Writer: pointers */
875 partial
= chain
+ k
-1;
877 * If the branch acquired continuation since we've looked at it -
878 * fine, it should all survive and (new) top doesn't belong to us.
880 if (!partial
->key
&& *partial
->p
)
883 for (p
= partial
; (p
> chain
) && all_zeroes((__le32
*) p
->bh
->b_data
, p
->p
); p
--)
886 * OK, we've found the last block that must survive. The rest of our
887 * branch should be detached before unlocking. However, if that rest
888 * of branch is all ours and does not grow immediately from the inode
889 * it's easier to cheat and just decrement partial->p.
891 if (p
== chain
+ k
- 1 && p
> chain
) {
895 /* Nope, don't do this in ext4. Must leave the tree intact */
902 while (partial
> p
) {
911 * Zero a number of block pointers in either an inode or an indirect block.
912 * If we restart the transaction we must again get write access to the
913 * indirect block for further modification.
915 * We release `count' blocks on disk, but (last - first) may be greater
916 * than `count' because there can be holes in there.
918 * Return 0 on success, 1 on invalid block range
919 * and < 0 on fatal error.
921 static int ext4_clear_blocks(handle_t
*handle
, struct inode
*inode
,
922 struct buffer_head
*bh
,
923 ext4_fsblk_t block_to_free
,
924 unsigned long count
, __le32
*first
,
928 int flags
= EXT4_FREE_BLOCKS_VALIDATED
;
931 if (S_ISDIR(inode
->i_mode
) || S_ISLNK(inode
->i_mode
))
932 flags
|= EXT4_FREE_BLOCKS_FORGET
| EXT4_FREE_BLOCKS_METADATA
;
933 else if (ext4_should_journal_data(inode
))
934 flags
|= EXT4_FREE_BLOCKS_FORGET
;
936 if (!ext4_data_block_valid(EXT4_SB(inode
->i_sb
), block_to_free
,
938 EXT4_ERROR_INODE(inode
, "attempt to clear invalid "
939 "blocks %llu len %lu",
940 (unsigned long long) block_to_free
, count
);
944 if (try_to_extend_transaction(handle
, inode
)) {
946 BUFFER_TRACE(bh
, "call ext4_handle_dirty_metadata");
947 err
= ext4_handle_dirty_metadata(handle
, inode
, bh
);
951 err
= ext4_mark_inode_dirty(handle
, inode
);
954 err
= ext4_truncate_restart_trans(handle
, inode
,
955 ext4_blocks_for_truncate(inode
));
959 BUFFER_TRACE(bh
, "retaking write access");
960 err
= ext4_journal_get_write_access(handle
, bh
);
966 for (p
= first
; p
< last
; p
++)
969 ext4_free_blocks(handle
, inode
, NULL
, block_to_free
, count
, flags
);
972 ext4_std_error(inode
->i_sb
, err
);
977 * ext4_free_data - free a list of data blocks
978 * @handle: handle for this transaction
979 * @inode: inode we are dealing with
980 * @this_bh: indirect buffer_head which contains *@first and *@last
981 * @first: array of block numbers
982 * @last: points immediately past the end of array
984 * We are freeing all blocks referred from that array (numbers are stored as
985 * little-endian 32-bit) and updating @inode->i_blocks appropriately.
987 * We accumulate contiguous runs of blocks to free. Conveniently, if these
988 * blocks are contiguous then releasing them at one time will only affect one
989 * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't
990 * actually use a lot of journal space.
992 * @this_bh will be %NULL if @first and @last point into the inode's direct
995 static void ext4_free_data(handle_t
*handle
, struct inode
*inode
,
996 struct buffer_head
*this_bh
,
997 __le32
*first
, __le32
*last
)
999 ext4_fsblk_t block_to_free
= 0; /* Starting block # of a run */
1000 unsigned long count
= 0; /* Number of blocks in the run */
1001 __le32
*block_to_free_p
= NULL
; /* Pointer into inode/ind
1004 ext4_fsblk_t nr
; /* Current block # */
1005 __le32
*p
; /* Pointer into inode/ind
1006 for current block */
1009 if (this_bh
) { /* For indirect block */
1010 BUFFER_TRACE(this_bh
, "get_write_access");
1011 err
= ext4_journal_get_write_access(handle
, this_bh
);
1012 /* Important: if we can't update the indirect pointers
1013 * to the blocks, we can't free them. */
1018 for (p
= first
; p
< last
; p
++) {
1019 nr
= le32_to_cpu(*p
);
1021 /* accumulate blocks to free if they're contiguous */
1024 block_to_free_p
= p
;
1026 } else if (nr
== block_to_free
+ count
) {
1029 err
= ext4_clear_blocks(handle
, inode
, this_bh
,
1030 block_to_free
, count
,
1031 block_to_free_p
, p
);
1035 block_to_free_p
= p
;
1041 if (!err
&& count
> 0)
1042 err
= ext4_clear_blocks(handle
, inode
, this_bh
, block_to_free
,
1043 count
, block_to_free_p
, p
);
1049 BUFFER_TRACE(this_bh
, "call ext4_handle_dirty_metadata");
1052 * The buffer head should have an attached journal head at this
1053 * point. However, if the data is corrupted and an indirect
1054 * block pointed to itself, it would have been detached when
1055 * the block was cleared. Check for this instead of OOPSing.
1057 if ((EXT4_JOURNAL(inode
) == NULL
) || bh2jh(this_bh
))
1058 ext4_handle_dirty_metadata(handle
, inode
, this_bh
);
1060 EXT4_ERROR_INODE(inode
,
1061 "circular indirect block detected at "
1063 (unsigned long long) this_bh
->b_blocknr
);
1068 * ext4_free_branches - free an array of branches
1069 * @handle: JBD handle for this transaction
1070 * @inode: inode we are dealing with
1071 * @parent_bh: the buffer_head which contains *@first and *@last
1072 * @first: array of block numbers
1073 * @last: pointer immediately past the end of array
1074 * @depth: depth of the branches to free
1076 * We are freeing all blocks referred from these branches (numbers are
1077 * stored as little-endian 32-bit) and updating @inode->i_blocks
1080 static void ext4_free_branches(handle_t
*handle
, struct inode
*inode
,
1081 struct buffer_head
*parent_bh
,
1082 __le32
*first
, __le32
*last
, int depth
)
1087 if (ext4_handle_is_aborted(handle
))
1091 struct buffer_head
*bh
;
1092 int addr_per_block
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
1094 while (--p
>= first
) {
1095 nr
= le32_to_cpu(*p
);
1097 continue; /* A hole */
1099 if (!ext4_data_block_valid(EXT4_SB(inode
->i_sb
),
1101 EXT4_ERROR_INODE(inode
,
1102 "invalid indirect mapped "
1103 "block %lu (level %d)",
1104 (unsigned long) nr
, depth
);
1108 /* Go read the buffer for the next level down */
1109 bh
= sb_bread(inode
->i_sb
, nr
);
1112 * A read failure? Report error and clear slot
1116 EXT4_ERROR_INODE_BLOCK(inode
, nr
,
1121 /* This zaps the entire block. Bottom up. */
1122 BUFFER_TRACE(bh
, "free child branches");
1123 ext4_free_branches(handle
, inode
, bh
,
1124 (__le32
*) bh
->b_data
,
1125 (__le32
*) bh
->b_data
+ addr_per_block
,
1130 * Everything below this this pointer has been
1131 * released. Now let this top-of-subtree go.
1133 * We want the freeing of this indirect block to be
1134 * atomic in the journal with the updating of the
1135 * bitmap block which owns it. So make some room in
1138 * We zero the parent pointer *after* freeing its
1139 * pointee in the bitmaps, so if extend_transaction()
1140 * for some reason fails to put the bitmap changes and
1141 * the release into the same transaction, recovery
1142 * will merely complain about releasing a free block,
1143 * rather than leaking blocks.
1145 if (ext4_handle_is_aborted(handle
))
1147 if (try_to_extend_transaction(handle
, inode
)) {
1148 ext4_mark_inode_dirty(handle
, inode
);
1149 ext4_truncate_restart_trans(handle
, inode
,
1150 ext4_blocks_for_truncate(inode
));
1154 * The forget flag here is critical because if
1155 * we are journaling (and not doing data
1156 * journaling), we have to make sure a revoke
1157 * record is written to prevent the journal
1158 * replay from overwriting the (former)
1159 * indirect block if it gets reallocated as a
1160 * data block. This must happen in the same
1161 * transaction where the data blocks are
1164 ext4_free_blocks(handle
, inode
, NULL
, nr
, 1,
1165 EXT4_FREE_BLOCKS_METADATA
|
1166 EXT4_FREE_BLOCKS_FORGET
);
1170 * The block which we have just freed is
1171 * pointed to by an indirect block: journal it
1173 BUFFER_TRACE(parent_bh
, "get_write_access");
1174 if (!ext4_journal_get_write_access(handle
,
1177 BUFFER_TRACE(parent_bh
,
1178 "call ext4_handle_dirty_metadata");
1179 ext4_handle_dirty_metadata(handle
,
1186 /* We have reached the bottom of the tree. */
1187 BUFFER_TRACE(parent_bh
, "free data blocks");
1188 ext4_free_data(handle
, inode
, parent_bh
, first
, last
);
1192 void ext4_ind_truncate(handle_t
*handle
, struct inode
*inode
)
1194 struct ext4_inode_info
*ei
= EXT4_I(inode
);
1195 __le32
*i_data
= ei
->i_data
;
1196 int addr_per_block
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
1197 ext4_lblk_t offsets
[4];
1202 ext4_lblk_t last_block
, max_block
;
1203 unsigned blocksize
= inode
->i_sb
->s_blocksize
;
1205 last_block
= (inode
->i_size
+ blocksize
-1)
1206 >> EXT4_BLOCK_SIZE_BITS(inode
->i_sb
);
1207 max_block
= (EXT4_SB(inode
->i_sb
)->s_bitmap_maxbytes
+ blocksize
-1)
1208 >> EXT4_BLOCK_SIZE_BITS(inode
->i_sb
);
1210 if (last_block
!= max_block
) {
1211 n
= ext4_block_to_path(inode
, last_block
, offsets
, NULL
);
1216 ext4_es_remove_extent(inode
, last_block
, EXT_MAX_BLOCKS
- last_block
);
1219 * The orphan list entry will now protect us from any crash which
1220 * occurs before the truncate completes, so it is now safe to propagate
1221 * the new, shorter inode size (held for now in i_size) into the
1222 * on-disk inode. We do this via i_disksize, which is the value which
1223 * ext4 *really* writes onto the disk inode.
1225 ei
->i_disksize
= inode
->i_size
;
1227 if (last_block
== max_block
) {
1229 * It is unnecessary to free any data blocks if last_block is
1230 * equal to the indirect block limit.
1233 } else if (n
== 1) { /* direct blocks */
1234 ext4_free_data(handle
, inode
, NULL
, i_data
+offsets
[0],
1235 i_data
+ EXT4_NDIR_BLOCKS
);
1239 partial
= ext4_find_shared(inode
, n
, offsets
, chain
, &nr
);
1240 /* Kill the top of shared branch (not detached) */
1242 if (partial
== chain
) {
1243 /* Shared branch grows from the inode */
1244 ext4_free_branches(handle
, inode
, NULL
,
1245 &nr
, &nr
+1, (chain
+n
-1) - partial
);
1248 * We mark the inode dirty prior to restart,
1249 * and prior to stop. No need for it here.
1252 /* Shared branch grows from an indirect block */
1253 BUFFER_TRACE(partial
->bh
, "get_write_access");
1254 ext4_free_branches(handle
, inode
, partial
->bh
,
1256 partial
->p
+1, (chain
+n
-1) - partial
);
1259 /* Clear the ends of indirect blocks on the shared branch */
1260 while (partial
> chain
) {
1261 ext4_free_branches(handle
, inode
, partial
->bh
, partial
->p
+ 1,
1262 (__le32
*)partial
->bh
->b_data
+addr_per_block
,
1263 (chain
+n
-1) - partial
);
1264 BUFFER_TRACE(partial
->bh
, "call brelse");
1265 brelse(partial
->bh
);
1269 /* Kill the remaining (whole) subtrees */
1270 switch (offsets
[0]) {
1272 nr
= i_data
[EXT4_IND_BLOCK
];
1274 ext4_free_branches(handle
, inode
, NULL
, &nr
, &nr
+1, 1);
1275 i_data
[EXT4_IND_BLOCK
] = 0;
1277 case EXT4_IND_BLOCK
:
1278 nr
= i_data
[EXT4_DIND_BLOCK
];
1280 ext4_free_branches(handle
, inode
, NULL
, &nr
, &nr
+1, 2);
1281 i_data
[EXT4_DIND_BLOCK
] = 0;
1283 case EXT4_DIND_BLOCK
:
1284 nr
= i_data
[EXT4_TIND_BLOCK
];
1286 ext4_free_branches(handle
, inode
, NULL
, &nr
, &nr
+1, 3);
1287 i_data
[EXT4_TIND_BLOCK
] = 0;
1289 case EXT4_TIND_BLOCK
:
1294 static int free_hole_blocks(handle_t
*handle
, struct inode
*inode
,
1295 struct buffer_head
*parent_bh
, __le32
*i_data
,
1296 int level
, ext4_lblk_t first
,
1297 ext4_lblk_t count
, int max
)
1299 struct buffer_head
*bh
= NULL
;
1300 int addr_per_block
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
1306 inc
= 1 << ((EXT4_BLOCK_SIZE_BITS(inode
->i_sb
) - 2) * level
);
1307 for (i
= 0, offset
= 0; i
< max
; i
++, i_data
++, offset
+= inc
) {
1308 if (offset
>= count
+ first
)
1310 if (*i_data
== 0 || (offset
+ inc
) <= first
)
1315 bh
= sb_bread(inode
->i_sb
, le32_to_cpu(blk
));
1317 EXT4_ERROR_INODE_BLOCK(inode
, le32_to_cpu(blk
),
1321 first2
= (first
> offset
) ? first
- offset
: 0;
1322 ret
= free_hole_blocks(handle
, inode
, bh
,
1323 (__le32
*)bh
->b_data
, level
- 1,
1324 first2
, count
- offset
,
1325 inode
->i_sb
->s_blocksize
>> 2);
1332 (bh
&& all_zeroes((__le32
*)bh
->b_data
,
1333 (__le32
*)bh
->b_data
+ addr_per_block
))) {
1334 ext4_free_data(handle
, inode
, parent_bh
, &blk
, &blk
+1);
1345 int ext4_free_hole_blocks(handle_t
*handle
, struct inode
*inode
,
1346 ext4_lblk_t first
, ext4_lblk_t stop
)
1348 int addr_per_block
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
1350 int num
= EXT4_NDIR_BLOCKS
;
1351 ext4_lblk_t count
, max
= EXT4_NDIR_BLOCKS
;
1352 __le32
*i_data
= EXT4_I(inode
)->i_data
;
1354 count
= stop
- first
;
1355 for (level
= 0; level
< 4; level
++, max
*= addr_per_block
) {
1357 ret
= free_hole_blocks(handle
, inode
, NULL
, i_data
,
1358 level
, first
, count
, num
);
1361 if (count
> max
- first
)
1362 count
-= max
- first
;