Merge branch 'r6040-next'
[linux/fpc-iii.git] / drivers / cpufreq / elanfreq.c
blobbfce11cba1df8d92068b4095e1772ce38b7db12e
1 /*
2 * elanfreq: cpufreq driver for the AMD ELAN family
4 * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
6 * Parts of this code are (c) Sven Geggus <sven@geggus.net>
8 * All Rights Reserved.
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
15 * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
21 #include <linux/kernel.h>
22 #include <linux/module.h>
23 #include <linux/init.h>
25 #include <linux/delay.h>
26 #include <linux/cpufreq.h>
28 #include <asm/cpu_device_id.h>
29 #include <asm/msr.h>
30 #include <linux/timex.h>
31 #include <linux/io.h>
33 #define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
34 #define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
36 /* Module parameter */
37 static int max_freq;
39 struct s_elan_multiplier {
40 int clock; /* frequency in kHz */
41 int val40h; /* PMU Force Mode register */
42 int val80h; /* CPU Clock Speed Register */
46 * It is important that the frequencies
47 * are listed in ascending order here!
49 static struct s_elan_multiplier elan_multiplier[] = {
50 {1000, 0x02, 0x18},
51 {2000, 0x02, 0x10},
52 {4000, 0x02, 0x08},
53 {8000, 0x00, 0x00},
54 {16000, 0x00, 0x02},
55 {33000, 0x00, 0x04},
56 {66000, 0x01, 0x04},
57 {99000, 0x01, 0x05}
60 static struct cpufreq_frequency_table elanfreq_table[] = {
61 {0, 0, 1000},
62 {0, 1, 2000},
63 {0, 2, 4000},
64 {0, 3, 8000},
65 {0, 4, 16000},
66 {0, 5, 33000},
67 {0, 6, 66000},
68 {0, 7, 99000},
69 {0, 0, CPUFREQ_TABLE_END},
73 /**
74 * elanfreq_get_cpu_frequency: determine current cpu speed
76 * Finds out at which frequency the CPU of the Elan SOC runs
77 * at the moment. Frequencies from 1 to 33 MHz are generated
78 * the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
79 * and have the rest of the chip running with 33 MHz.
82 static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
84 u8 clockspeed_reg; /* Clock Speed Register */
86 local_irq_disable();
87 outb_p(0x80, REG_CSCIR);
88 clockspeed_reg = inb_p(REG_CSCDR);
89 local_irq_enable();
91 if ((clockspeed_reg & 0xE0) == 0xE0)
92 return 0;
94 /* Are we in CPU clock multiplied mode (66/99 MHz)? */
95 if ((clockspeed_reg & 0xE0) == 0xC0) {
96 if ((clockspeed_reg & 0x01) == 0)
97 return 66000;
98 else
99 return 99000;
102 /* 33 MHz is not 32 MHz... */
103 if ((clockspeed_reg & 0xE0) == 0xA0)
104 return 33000;
106 return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
110 static int elanfreq_target(struct cpufreq_policy *policy,
111 unsigned int state)
114 * Access to the Elan's internal registers is indexed via
115 * 0x22: Chip Setup & Control Register Index Register (CSCI)
116 * 0x23: Chip Setup & Control Register Data Register (CSCD)
121 * 0x40 is the Power Management Unit's Force Mode Register.
122 * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
125 local_irq_disable();
126 outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */
127 outb_p(0x00, REG_CSCDR);
128 local_irq_enable(); /* wait till internal pipelines and */
129 udelay(1000); /* buffers have cleaned up */
131 local_irq_disable();
133 /* now, set the CPU clock speed register (0x80) */
134 outb_p(0x80, REG_CSCIR);
135 outb_p(elan_multiplier[state].val80h, REG_CSCDR);
137 /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
138 outb_p(0x40, REG_CSCIR);
139 outb_p(elan_multiplier[state].val40h, REG_CSCDR);
140 udelay(10000);
141 local_irq_enable();
143 return 0;
146 * Module init and exit code
149 static int elanfreq_cpu_init(struct cpufreq_policy *policy)
151 struct cpuinfo_x86 *c = &cpu_data(0);
152 struct cpufreq_frequency_table *pos;
154 /* capability check */
155 if ((c->x86_vendor != X86_VENDOR_AMD) ||
156 (c->x86 != 4) || (c->x86_model != 10))
157 return -ENODEV;
159 /* max freq */
160 if (!max_freq)
161 max_freq = elanfreq_get_cpu_frequency(0);
163 /* table init */
164 cpufreq_for_each_entry(pos, elanfreq_table)
165 if (pos->frequency > max_freq)
166 pos->frequency = CPUFREQ_ENTRY_INVALID;
168 /* cpuinfo and default policy values */
169 policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
171 return cpufreq_table_validate_and_show(policy, elanfreq_table);
175 #ifndef MODULE
177 * elanfreq_setup - elanfreq command line parameter parsing
179 * elanfreq command line parameter. Use:
180 * elanfreq=66000
181 * to set the maximum CPU frequency to 66 MHz. Note that in
182 * case you do not give this boot parameter, the maximum
183 * frequency will fall back to _current_ CPU frequency which
184 * might be lower. If you build this as a module, use the
185 * max_freq module parameter instead.
187 static int __init elanfreq_setup(char *str)
189 max_freq = simple_strtoul(str, &str, 0);
190 pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
191 return 1;
193 __setup("elanfreq=", elanfreq_setup);
194 #endif
197 static struct cpufreq_driver elanfreq_driver = {
198 .get = elanfreq_get_cpu_frequency,
199 .verify = cpufreq_generic_frequency_table_verify,
200 .target_index = elanfreq_target,
201 .init = elanfreq_cpu_init,
202 .name = "elanfreq",
203 .attr = cpufreq_generic_attr,
206 static const struct x86_cpu_id elan_id[] = {
207 { X86_VENDOR_AMD, 4, 10, },
210 MODULE_DEVICE_TABLE(x86cpu, elan_id);
212 static int __init elanfreq_init(void)
214 if (!x86_match_cpu(elan_id))
215 return -ENODEV;
216 return cpufreq_register_driver(&elanfreq_driver);
220 static void __exit elanfreq_exit(void)
222 cpufreq_unregister_driver(&elanfreq_driver);
226 module_param(max_freq, int, 0444);
228 MODULE_LICENSE("GPL");
229 MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
230 "Sven Geggus <sven@geggus.net>");
231 MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
233 module_init(elanfreq_init);
234 module_exit(elanfreq_exit);