net: DCB: Validate DCB_ATTR_DCB_BUFFER argument
[linux/fpc-iii.git] / drivers / block / paride / pd.c
blob6f9ad3fc716f67b0a3fd804afa6ac5c0641a3448
1 /*
2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
5 This is the high-level driver for parallel port IDE hard
6 drives based on chips supported by the paride module.
8 By default, the driver will autoprobe for a single parallel
9 port IDE drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
12 The behaviour of the pd driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
16 drive0 These four arguments can be arrays of
17 drive1 1-8 integers as follows:
18 drive2
19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
21 Where,
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
35 (0 if not given)
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
39 (-1 if not given)
41 <geo> this defaults to 0 to indicate that the driver
42 should use the CHS geometry provided by the drive
43 itself. If set to 1, the driver will provide
44 a logical geometry with 64 heads and 32 sectors
45 per track, to be consistent with most SCSI
46 drivers. (0 if not given)
48 <sby> set this to zero to disable the power saving
49 standby mode, if needed. (1 if not given)
51 <dly> some parallel ports require the driver to
52 go more slowly. -1 sets a default value that
53 should work with the chosen protocol. Otherwise,
54 set this to a small integer, the larger it is
55 the slower the port i/o. In some cases, setting
56 this to zero will speed up the device. (default -1)
58 <slv> IDE disks can be jumpered to master or slave.
59 Set this to 0 to choose the master drive, 1 to
60 choose the slave, -1 (the default) to choose the
61 first drive found.
64 major You may use this parameter to override the
65 default major number (45) that this driver
66 will use. Be sure to change the device
67 name as well.
69 name This parameter is a character string that
70 contains the name the kernel will use for this
71 device (in /proc output, for instance).
72 (default "pd")
74 cluster The driver will attempt to aggregate requests
75 for adjacent blocks into larger multi-block
76 clusters. The maximum cluster size (in 512
77 byte sectors) is set with this parameter.
78 (default 64)
80 verbose This parameter controls the amount of logging
81 that the driver will do. Set it to 0 for
82 normal operation, 1 to see autoprobe progress
83 messages, or 2 to see additional debugging
84 output. (default 0)
86 nice This parameter controls the driver's use of
87 idle CPU time, at the expense of some speed.
89 If this driver is built into the kernel, you can use kernel
90 the following command line parameters, with the same values
91 as the corresponding module parameters listed above:
93 pd.drive0
94 pd.drive1
95 pd.drive2
96 pd.drive3
97 pd.cluster
98 pd.nice
100 In addition, you can use the parameter pd.disable to disable
101 the driver entirely.
105 /* Changes:
107 1.01 GRG 1997.01.24 Restored pd_reset()
108 Added eject ioctl
109 1.02 GRG 1998.05.06 SMP spinlock changes,
110 Added slave support
111 1.03 GRG 1998.06.16 Eliminate an Ugh.
112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
113 1.05 GRG 1998.09.24 Added jumbo support
117 #define PD_VERSION "1.05"
118 #define PD_MAJOR 45
119 #define PD_NAME "pd"
120 #define PD_UNITS 4
122 /* Here are things one can override from the insmod command.
123 Most are autoprobed by paride unless set here. Verbose is off
124 by default.
127 #include <linux/types.h>
129 static int verbose = 0;
130 static int major = PD_MAJOR;
131 static char *name = PD_NAME;
132 static int cluster = 64;
133 static int nice = 0;
134 static int disable = 0;
136 static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
137 static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
138 static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
139 static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
141 static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
143 enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
145 /* end of parameters */
147 #include <linux/init.h>
148 #include <linux/module.h>
149 #include <linux/gfp.h>
150 #include <linux/fs.h>
151 #include <linux/delay.h>
152 #include <linux/hdreg.h>
153 #include <linux/cdrom.h> /* for the eject ioctl */
154 #include <linux/blk-mq.h>
155 #include <linux/blkpg.h>
156 #include <linux/kernel.h>
157 #include <linux/mutex.h>
158 #include <linux/uaccess.h>
159 #include <linux/workqueue.h>
161 static DEFINE_MUTEX(pd_mutex);
162 static DEFINE_SPINLOCK(pd_lock);
164 module_param(verbose, int, 0);
165 module_param(major, int, 0);
166 module_param(name, charp, 0);
167 module_param(cluster, int, 0);
168 module_param(nice, int, 0);
169 module_param_array(drive0, int, NULL, 0);
170 module_param_array(drive1, int, NULL, 0);
171 module_param_array(drive2, int, NULL, 0);
172 module_param_array(drive3, int, NULL, 0);
174 #include "paride.h"
176 #define PD_BITS 4
178 /* numbers for "SCSI" geometry */
180 #define PD_LOG_HEADS 64
181 #define PD_LOG_SECTS 32
183 #define PD_ID_OFF 54
184 #define PD_ID_LEN 14
186 #define PD_MAX_RETRIES 5
187 #define PD_TMO 800 /* interrupt timeout in jiffies */
188 #define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
190 #define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
192 #define STAT_ERR 0x00001
193 #define STAT_INDEX 0x00002
194 #define STAT_ECC 0x00004
195 #define STAT_DRQ 0x00008
196 #define STAT_SEEK 0x00010
197 #define STAT_WRERR 0x00020
198 #define STAT_READY 0x00040
199 #define STAT_BUSY 0x00080
201 #define ERR_AMNF 0x00100
202 #define ERR_TK0NF 0x00200
203 #define ERR_ABRT 0x00400
204 #define ERR_MCR 0x00800
205 #define ERR_IDNF 0x01000
206 #define ERR_MC 0x02000
207 #define ERR_UNC 0x04000
208 #define ERR_TMO 0x10000
210 #define IDE_READ 0x20
211 #define IDE_WRITE 0x30
212 #define IDE_READ_VRFY 0x40
213 #define IDE_INIT_DEV_PARMS 0x91
214 #define IDE_STANDBY 0x96
215 #define IDE_ACKCHANGE 0xdb
216 #define IDE_DOORLOCK 0xde
217 #define IDE_DOORUNLOCK 0xdf
218 #define IDE_IDENTIFY 0xec
219 #define IDE_EJECT 0xed
221 #define PD_NAMELEN 8
223 struct pd_unit {
224 struct pi_adapter pia; /* interface to paride layer */
225 struct pi_adapter *pi;
226 int access; /* count of active opens ... */
227 int capacity; /* Size of this volume in sectors */
228 int heads; /* physical geometry */
229 int sectors;
230 int cylinders;
231 int can_lba;
232 int drive; /* master=0 slave=1 */
233 int changed; /* Have we seen a disk change ? */
234 int removable; /* removable media device ? */
235 int standby;
236 int alt_geom;
237 char name[PD_NAMELEN]; /* pda, pdb, etc ... */
238 struct gendisk *gd;
239 struct blk_mq_tag_set tag_set;
240 struct list_head rq_list;
243 static struct pd_unit pd[PD_UNITS];
245 struct pd_req {
246 /* for REQ_OP_DRV_IN: */
247 enum action (*func)(struct pd_unit *disk);
250 static char pd_scratch[512]; /* scratch block buffer */
252 static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
253 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
254 "IDNF", "MC", "UNC", "???", "TMO"
257 static void *par_drv; /* reference of parport driver */
259 static inline int status_reg(struct pd_unit *disk)
261 return pi_read_regr(disk->pi, 1, 6);
264 static inline int read_reg(struct pd_unit *disk, int reg)
266 return pi_read_regr(disk->pi, 0, reg);
269 static inline void write_status(struct pd_unit *disk, int val)
271 pi_write_regr(disk->pi, 1, 6, val);
274 static inline void write_reg(struct pd_unit *disk, int reg, int val)
276 pi_write_regr(disk->pi, 0, reg, val);
279 static inline u8 DRIVE(struct pd_unit *disk)
281 return 0xa0+0x10*disk->drive;
284 /* ide command interface */
286 static void pd_print_error(struct pd_unit *disk, char *msg, int status)
288 int i;
290 printk("%s: %s: status = 0x%x =", disk->name, msg, status);
291 for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
292 if (status & (1 << i))
293 printk(" %s", pd_errs[i]);
294 printk("\n");
297 static void pd_reset(struct pd_unit *disk)
298 { /* called only for MASTER drive */
299 write_status(disk, 4);
300 udelay(50);
301 write_status(disk, 0);
302 udelay(250);
305 #define DBMSG(msg) ((verbose>1)?(msg):NULL)
307 static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
308 { /* polled wait */
309 int k, r, e;
311 k = 0;
312 while (k < PD_SPIN) {
313 r = status_reg(disk);
314 k++;
315 if (((r & w) == w) && !(r & STAT_BUSY))
316 break;
317 udelay(PD_SPIN_DEL);
319 e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
320 if (k >= PD_SPIN)
321 e |= ERR_TMO;
322 if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
323 pd_print_error(disk, msg, e);
324 return e;
327 static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
329 write_reg(disk, 6, DRIVE(disk) + h);
330 write_reg(disk, 1, 0); /* the IDE task file */
331 write_reg(disk, 2, n);
332 write_reg(disk, 3, s);
333 write_reg(disk, 4, c0);
334 write_reg(disk, 5, c1);
335 write_reg(disk, 7, func);
337 udelay(1);
340 static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
342 int c1, c0, h, s;
344 if (disk->can_lba) {
345 s = block & 255;
346 c0 = (block >>= 8) & 255;
347 c1 = (block >>= 8) & 255;
348 h = ((block >>= 8) & 15) + 0x40;
349 } else {
350 s = (block % disk->sectors) + 1;
351 h = (block /= disk->sectors) % disk->heads;
352 c0 = (block /= disk->heads) % 256;
353 c1 = (block >>= 8);
355 pd_send_command(disk, count, s, h, c0, c1, func);
358 /* The i/o request engine */
360 enum action {Fail = 0, Ok = 1, Hold, Wait};
362 static struct request *pd_req; /* current request */
363 static enum action (*phase)(void);
365 static void run_fsm(void);
367 static void ps_tq_int(struct work_struct *work);
369 static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
371 static void schedule_fsm(void)
373 if (!nice)
374 schedule_delayed_work(&fsm_tq, 0);
375 else
376 schedule_delayed_work(&fsm_tq, nice-1);
379 static void ps_tq_int(struct work_struct *work)
381 run_fsm();
384 static enum action do_pd_io_start(void);
385 static enum action pd_special(void);
386 static enum action do_pd_read_start(void);
387 static enum action do_pd_write_start(void);
388 static enum action do_pd_read_drq(void);
389 static enum action do_pd_write_done(void);
391 static int pd_queue;
392 static int pd_claimed;
394 static struct pd_unit *pd_current; /* current request's drive */
395 static PIA *pi_current; /* current request's PIA */
397 static int set_next_request(void)
399 struct gendisk *disk;
400 struct request_queue *q;
401 int old_pos = pd_queue;
403 do {
404 disk = pd[pd_queue].gd;
405 q = disk ? disk->queue : NULL;
406 if (++pd_queue == PD_UNITS)
407 pd_queue = 0;
408 if (q) {
409 struct pd_unit *disk = q->queuedata;
411 if (list_empty(&disk->rq_list))
412 continue;
414 pd_req = list_first_entry(&disk->rq_list,
415 struct request,
416 queuelist);
417 list_del_init(&pd_req->queuelist);
418 blk_mq_start_request(pd_req);
419 break;
421 } while (pd_queue != old_pos);
423 return pd_req != NULL;
426 static void run_fsm(void)
428 while (1) {
429 enum action res;
430 int stop = 0;
432 if (!phase) {
433 pd_current = pd_req->rq_disk->private_data;
434 pi_current = pd_current->pi;
435 phase = do_pd_io_start;
438 switch (pd_claimed) {
439 case 0:
440 pd_claimed = 1;
441 if (!pi_schedule_claimed(pi_current, run_fsm))
442 return;
443 /* fall through */
444 case 1:
445 pd_claimed = 2;
446 pi_current->proto->connect(pi_current);
449 switch(res = phase()) {
450 case Ok: case Fail: {
451 blk_status_t err;
453 err = res == Ok ? 0 : BLK_STS_IOERR;
454 pi_disconnect(pi_current);
455 pd_claimed = 0;
456 phase = NULL;
457 spin_lock_irq(&pd_lock);
458 if (!blk_update_request(pd_req, err,
459 blk_rq_cur_bytes(pd_req))) {
460 __blk_mq_end_request(pd_req, err);
461 pd_req = NULL;
462 stop = !set_next_request();
464 spin_unlock_irq(&pd_lock);
465 if (stop)
466 return;
468 /* fall through */
469 case Hold:
470 schedule_fsm();
471 return;
472 case Wait:
473 pi_disconnect(pi_current);
474 pd_claimed = 0;
479 static int pd_retries = 0; /* i/o error retry count */
480 static int pd_block; /* address of next requested block */
481 static int pd_count; /* number of blocks still to do */
482 static int pd_run; /* sectors in current cluster */
483 static char *pd_buf; /* buffer for request in progress */
485 static enum action do_pd_io_start(void)
487 switch (req_op(pd_req)) {
488 case REQ_OP_DRV_IN:
489 phase = pd_special;
490 return pd_special();
491 case REQ_OP_READ:
492 case REQ_OP_WRITE:
493 pd_block = blk_rq_pos(pd_req);
494 pd_count = blk_rq_cur_sectors(pd_req);
495 if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
496 return Fail;
497 pd_run = blk_rq_sectors(pd_req);
498 pd_buf = bio_data(pd_req->bio);
499 pd_retries = 0;
500 if (req_op(pd_req) == REQ_OP_READ)
501 return do_pd_read_start();
502 else
503 return do_pd_write_start();
505 return Fail;
508 static enum action pd_special(void)
510 struct pd_req *req = blk_mq_rq_to_pdu(pd_req);
512 return req->func(pd_current);
515 static int pd_next_buf(void)
517 unsigned long saved_flags;
519 pd_count--;
520 pd_run--;
521 pd_buf += 512;
522 pd_block++;
523 if (!pd_run)
524 return 1;
525 if (pd_count)
526 return 0;
527 spin_lock_irqsave(&pd_lock, saved_flags);
528 if (!blk_update_request(pd_req, 0, blk_rq_cur_bytes(pd_req))) {
529 __blk_mq_end_request(pd_req, 0);
530 pd_req = NULL;
531 pd_count = 0;
532 pd_buf = NULL;
533 } else {
534 pd_count = blk_rq_cur_sectors(pd_req);
535 pd_buf = bio_data(pd_req->bio);
537 spin_unlock_irqrestore(&pd_lock, saved_flags);
538 return !pd_count;
541 static unsigned long pd_timeout;
543 static enum action do_pd_read_start(void)
545 if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
546 if (pd_retries < PD_MAX_RETRIES) {
547 pd_retries++;
548 return Wait;
550 return Fail;
552 pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
553 phase = do_pd_read_drq;
554 pd_timeout = jiffies + PD_TMO;
555 return Hold;
558 static enum action do_pd_write_start(void)
560 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
561 if (pd_retries < PD_MAX_RETRIES) {
562 pd_retries++;
563 return Wait;
565 return Fail;
567 pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
568 while (1) {
569 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
570 if (pd_retries < PD_MAX_RETRIES) {
571 pd_retries++;
572 return Wait;
574 return Fail;
576 pi_write_block(pd_current->pi, pd_buf, 512);
577 if (pd_next_buf())
578 break;
580 phase = do_pd_write_done;
581 pd_timeout = jiffies + PD_TMO;
582 return Hold;
585 static inline int pd_ready(void)
587 return !(status_reg(pd_current) & STAT_BUSY);
590 static enum action do_pd_read_drq(void)
592 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
593 return Hold;
595 while (1) {
596 if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
597 if (pd_retries < PD_MAX_RETRIES) {
598 pd_retries++;
599 phase = do_pd_read_start;
600 return Wait;
602 return Fail;
604 pi_read_block(pd_current->pi, pd_buf, 512);
605 if (pd_next_buf())
606 break;
608 return Ok;
611 static enum action do_pd_write_done(void)
613 if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
614 return Hold;
616 if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
617 if (pd_retries < PD_MAX_RETRIES) {
618 pd_retries++;
619 phase = do_pd_write_start;
620 return Wait;
622 return Fail;
624 return Ok;
627 /* special io requests */
629 /* According to the ATA standard, the default CHS geometry should be
630 available following a reset. Some Western Digital drives come up
631 in a mode where only LBA addresses are accepted until the device
632 parameters are initialised.
635 static void pd_init_dev_parms(struct pd_unit *disk)
637 pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
638 pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
639 IDE_INIT_DEV_PARMS);
640 udelay(300);
641 pd_wait_for(disk, 0, "Initialise device parameters");
644 static enum action pd_door_lock(struct pd_unit *disk)
646 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
647 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
648 pd_wait_for(disk, STAT_READY, "Lock done");
650 return Ok;
653 static enum action pd_door_unlock(struct pd_unit *disk)
655 if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
656 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
657 pd_wait_for(disk, STAT_READY, "Lock done");
659 return Ok;
662 static enum action pd_eject(struct pd_unit *disk)
664 pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
665 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
666 pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
667 pd_wait_for(disk, 0, DBMSG("before eject"));
668 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
669 pd_wait_for(disk, 0, DBMSG("after eject"));
670 return Ok;
673 static enum action pd_media_check(struct pd_unit *disk)
675 int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
676 if (!(r & STAT_ERR)) {
677 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
678 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
679 } else
680 disk->changed = 1; /* say changed if other error */
681 if (r & ERR_MC) {
682 disk->changed = 1;
683 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
684 pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
685 pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
686 r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
688 return Ok;
691 static void pd_standby_off(struct pd_unit *disk)
693 pd_wait_for(disk, 0, DBMSG("before STANDBY"));
694 pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
695 pd_wait_for(disk, 0, DBMSG("after STANDBY"));
698 static enum action pd_identify(struct pd_unit *disk)
700 int j;
701 char id[PD_ID_LEN + 1];
703 /* WARNING: here there may be dragons. reset() applies to both drives,
704 but we call it only on probing the MASTER. This should allow most
705 common configurations to work, but be warned that a reset can clear
706 settings on the SLAVE drive.
709 if (disk->drive == 0)
710 pd_reset(disk);
712 write_reg(disk, 6, DRIVE(disk));
713 pd_wait_for(disk, 0, DBMSG("before IDENT"));
714 pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
716 if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
717 return Fail;
718 pi_read_block(disk->pi, pd_scratch, 512);
719 disk->can_lba = pd_scratch[99] & 2;
720 disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
721 disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
722 disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
723 if (disk->can_lba)
724 disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
725 else
726 disk->capacity = disk->sectors * disk->heads * disk->cylinders;
728 for (j = 0; j < PD_ID_LEN; j++)
729 id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
730 j = PD_ID_LEN - 1;
731 while ((j >= 0) && (id[j] <= 0x20))
732 j--;
733 j++;
734 id[j] = 0;
736 disk->removable = pd_scratch[0] & 0x80;
738 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
739 disk->name, id,
740 disk->drive ? "slave" : "master",
741 disk->capacity, disk->capacity / 2048,
742 disk->cylinders, disk->heads, disk->sectors,
743 disk->removable ? "removable" : "fixed");
745 if (disk->capacity)
746 pd_init_dev_parms(disk);
747 if (!disk->standby)
748 pd_standby_off(disk);
750 return Ok;
753 /* end of io request engine */
755 static blk_status_t pd_queue_rq(struct blk_mq_hw_ctx *hctx,
756 const struct blk_mq_queue_data *bd)
758 struct pd_unit *disk = hctx->queue->queuedata;
760 spin_lock_irq(&pd_lock);
761 if (!pd_req) {
762 pd_req = bd->rq;
763 blk_mq_start_request(pd_req);
764 } else
765 list_add_tail(&bd->rq->queuelist, &disk->rq_list);
766 spin_unlock_irq(&pd_lock);
768 run_fsm();
769 return BLK_STS_OK;
772 static int pd_special_command(struct pd_unit *disk,
773 enum action (*func)(struct pd_unit *disk))
775 struct request *rq;
776 struct pd_req *req;
778 rq = blk_get_request(disk->gd->queue, REQ_OP_DRV_IN, 0);
779 if (IS_ERR(rq))
780 return PTR_ERR(rq);
781 req = blk_mq_rq_to_pdu(rq);
783 req->func = func;
784 blk_execute_rq(disk->gd->queue, disk->gd, rq, 0);
785 blk_put_request(rq);
786 return 0;
789 /* kernel glue structures */
791 static int pd_open(struct block_device *bdev, fmode_t mode)
793 struct pd_unit *disk = bdev->bd_disk->private_data;
795 mutex_lock(&pd_mutex);
796 disk->access++;
798 if (disk->removable) {
799 pd_special_command(disk, pd_media_check);
800 pd_special_command(disk, pd_door_lock);
802 mutex_unlock(&pd_mutex);
803 return 0;
806 static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
808 struct pd_unit *disk = bdev->bd_disk->private_data;
810 if (disk->alt_geom) {
811 geo->heads = PD_LOG_HEADS;
812 geo->sectors = PD_LOG_SECTS;
813 geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
814 } else {
815 geo->heads = disk->heads;
816 geo->sectors = disk->sectors;
817 geo->cylinders = disk->cylinders;
820 return 0;
823 static int pd_ioctl(struct block_device *bdev, fmode_t mode,
824 unsigned int cmd, unsigned long arg)
826 struct pd_unit *disk = bdev->bd_disk->private_data;
828 switch (cmd) {
829 case CDROMEJECT:
830 mutex_lock(&pd_mutex);
831 if (disk->access == 1)
832 pd_special_command(disk, pd_eject);
833 mutex_unlock(&pd_mutex);
834 return 0;
835 default:
836 return -EINVAL;
840 static void pd_release(struct gendisk *p, fmode_t mode)
842 struct pd_unit *disk = p->private_data;
844 mutex_lock(&pd_mutex);
845 if (!--disk->access && disk->removable)
846 pd_special_command(disk, pd_door_unlock);
847 mutex_unlock(&pd_mutex);
850 static unsigned int pd_check_events(struct gendisk *p, unsigned int clearing)
852 struct pd_unit *disk = p->private_data;
853 int r;
854 if (!disk->removable)
855 return 0;
856 pd_special_command(disk, pd_media_check);
857 r = disk->changed;
858 disk->changed = 0;
859 return r ? DISK_EVENT_MEDIA_CHANGE : 0;
862 static int pd_revalidate(struct gendisk *p)
864 struct pd_unit *disk = p->private_data;
865 if (pd_special_command(disk, pd_identify) == 0)
866 set_capacity(p, disk->capacity);
867 else
868 set_capacity(p, 0);
869 return 0;
872 static const struct block_device_operations pd_fops = {
873 .owner = THIS_MODULE,
874 .open = pd_open,
875 .release = pd_release,
876 .ioctl = pd_ioctl,
877 .getgeo = pd_getgeo,
878 .check_events = pd_check_events,
879 .revalidate_disk= pd_revalidate
882 /* probing */
884 static const struct blk_mq_ops pd_mq_ops = {
885 .queue_rq = pd_queue_rq,
888 static void pd_probe_drive(struct pd_unit *disk)
890 struct gendisk *p;
892 p = alloc_disk(1 << PD_BITS);
893 if (!p)
894 return;
896 strcpy(p->disk_name, disk->name);
897 p->fops = &pd_fops;
898 p->major = major;
899 p->first_minor = (disk - pd) << PD_BITS;
900 p->events = DISK_EVENT_MEDIA_CHANGE;
901 disk->gd = p;
902 p->private_data = disk;
904 memset(&disk->tag_set, 0, sizeof(disk->tag_set));
905 disk->tag_set.ops = &pd_mq_ops;
906 disk->tag_set.cmd_size = sizeof(struct pd_req);
907 disk->tag_set.nr_hw_queues = 1;
908 disk->tag_set.nr_maps = 1;
909 disk->tag_set.queue_depth = 2;
910 disk->tag_set.numa_node = NUMA_NO_NODE;
911 disk->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_BLOCKING;
913 if (blk_mq_alloc_tag_set(&disk->tag_set))
914 return;
916 p->queue = blk_mq_init_queue(&disk->tag_set);
917 if (IS_ERR(p->queue)) {
918 blk_mq_free_tag_set(&disk->tag_set);
919 p->queue = NULL;
920 return;
923 p->queue->queuedata = disk;
924 blk_queue_max_hw_sectors(p->queue, cluster);
925 blk_queue_bounce_limit(p->queue, BLK_BOUNCE_HIGH);
927 if (disk->drive == -1) {
928 for (disk->drive = 0; disk->drive <= 1; disk->drive++)
929 if (pd_special_command(disk, pd_identify) == 0)
930 return;
931 } else if (pd_special_command(disk, pd_identify) == 0)
932 return;
933 disk->gd = NULL;
934 put_disk(p);
937 static int pd_detect(void)
939 int found = 0, unit, pd_drive_count = 0;
940 struct pd_unit *disk;
942 for (unit = 0; unit < PD_UNITS; unit++) {
943 int *parm = *drives[unit];
944 struct pd_unit *disk = pd + unit;
945 disk->pi = &disk->pia;
946 disk->access = 0;
947 disk->changed = 1;
948 disk->capacity = 0;
949 disk->drive = parm[D_SLV];
950 snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit);
951 disk->alt_geom = parm[D_GEO];
952 disk->standby = parm[D_SBY];
953 if (parm[D_PRT])
954 pd_drive_count++;
955 INIT_LIST_HEAD(&disk->rq_list);
958 par_drv = pi_register_driver(name);
959 if (!par_drv) {
960 pr_err("failed to register %s driver\n", name);
961 return -1;
964 if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
965 disk = pd;
966 if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch,
967 PI_PD, verbose, disk->name)) {
968 pd_probe_drive(disk);
969 if (!disk->gd)
970 pi_release(disk->pi);
973 } else {
974 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
975 int *parm = *drives[unit];
976 if (!parm[D_PRT])
977 continue;
978 if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD],
979 parm[D_UNI], parm[D_PRO], parm[D_DLY],
980 pd_scratch, PI_PD, verbose, disk->name)) {
981 pd_probe_drive(disk);
982 if (!disk->gd)
983 pi_release(disk->pi);
987 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
988 if (disk->gd) {
989 set_capacity(disk->gd, disk->capacity);
990 add_disk(disk->gd);
991 found = 1;
994 if (!found) {
995 printk("%s: no valid drive found\n", name);
996 pi_unregister_driver(par_drv);
998 return found;
1001 static int __init pd_init(void)
1003 if (disable)
1004 goto out1;
1006 if (register_blkdev(major, name))
1007 goto out1;
1009 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
1010 name, name, PD_VERSION, major, cluster, nice);
1011 if (!pd_detect())
1012 goto out2;
1014 return 0;
1016 out2:
1017 unregister_blkdev(major, name);
1018 out1:
1019 return -ENODEV;
1022 static void __exit pd_exit(void)
1024 struct pd_unit *disk;
1025 int unit;
1026 unregister_blkdev(major, name);
1027 for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
1028 struct gendisk *p = disk->gd;
1029 if (p) {
1030 disk->gd = NULL;
1031 del_gendisk(p);
1032 blk_cleanup_queue(p->queue);
1033 blk_mq_free_tag_set(&disk->tag_set);
1034 put_disk(p);
1035 pi_release(disk->pi);
1040 MODULE_LICENSE("GPL");
1041 module_init(pd_init)
1042 module_exit(pd_exit)