| blob | 4989661b710b4a0643d39ab9b2c238c6cf01d786 |
1 /*
2 * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
3 * Initial PowerPC version.
4 * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
5 * Rewritten for PReP
6 * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
7 * Low-level exception handers, MMU support, and rewrite.
8 * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
9 * PowerPC 8xx modifications.
10 * Copyright (c) 1998-1999 TiVo, Inc.
11 * PowerPC 403GCX modifications.
12 * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
13 * PowerPC 403GCX/405GP modifications.
14 * Copyright 2000 MontaVista Software Inc.
15 * PPC405 modifications
16 * PowerPC 403GCX/405GP modifications.
17 * Author: MontaVista Software, Inc.
18 * frank_rowand@mvista.com or source@mvista.com
19 * debbie_chu@mvista.com
20 *
21 *
22 * Module name: head_4xx.S
23 *
24 * Description:
25 * Kernel execution entry point code.
26 *
27 * This program is free software; you can redistribute it and/or
28 * modify it under the terms of the GNU General Public License
29 * as published by the Free Software Foundation; either version
30 * 2 of the License, or (at your option) any later version.
31 *
32 */
34 #include <linux/init.h>
35 #include <asm/processor.h>
36 #include <asm/page.h>
37 #include <asm/mmu.h>
38 #include <asm/pgtable.h>
39 #include <asm/cputable.h>
40 #include <asm/thread_info.h>
41 #include <asm/ppc_asm.h>
42 #include <asm/asm-offsets.h>
43 #include <asm/ptrace.h>
45 /* As with the other PowerPC ports, it is expected that when code
46 * execution begins here, the following registers contain valid, yet
47 * optional, information:
48 *
49 * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
50 * r4 - Starting address of the init RAM disk
51 * r5 - Ending address of the init RAM disk
52 * r6 - Start of kernel command line string (e.g. "mem=96m")
53 * r7 - End of kernel command line string
54 *
55 * This is all going to change RSN when we add bi_recs....... -- Dan
56 */
57 __HEAD
58 _ENTRY(_stext);
59 _ENTRY(_start);
61 mr r31,r3 /* save device tree ptr */
63 /* We have to turn on the MMU right away so we get cache modes
64 * set correctly.
65 */
66 bl initial_mmu
68 /* We now have the lower 16 Meg mapped into TLB entries, and the caches
69 * ready to work.
70 */
71 turn_on_mmu:
72 lis r0,MSR_KERNEL@h
73 ori r0,r0,MSR_KERNEL@l
74 mtspr SPRN_SRR1,r0
75 lis r0,start_here@h
76 ori r0,r0,start_here@l
77 mtspr SPRN_SRR0,r0
78 SYNC
79 rfi /* enables MMU */
80 b . /* prevent prefetch past rfi */
82 /*
83 * This area is used for temporarily saving registers during the
84 * critical exception prolog.
85 */
86 . = 0xc0
87 crit_save:
88 _ENTRY(crit_r10)
89 .space 4
90 _ENTRY(crit_r11)
91 .space 4
92 _ENTRY(crit_srr0)
93 .space 4
94 _ENTRY(crit_srr1)
95 .space 4
96 _ENTRY(saved_ksp_limit)
97 .space 4
99 /*
100 * Exception vector entry code. This code runs with address translation
101 * turned off (i.e. using physical addresses). We assume SPRG_THREAD has
102 * the physical address of the current task thread_struct.
103 * Note that we have to have decremented r1 before we write to any fields
104 * of the exception frame, since a critical interrupt could occur at any
105 * time, and it will write to the area immediately below the current r1.
106 */
107 #define NORMAL_EXCEPTION_PROLOG \
108 mtspr SPRN_SPRG_SCRATCH0,r10; /* save two registers to work with */\
109 mtspr SPRN_SPRG_SCRATCH1,r11; \
110 mtspr SPRN_SPRG_SCRATCH2,r1; \
111 mfcr r10; /* save CR in r10 for now */\
112 mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
113 andi. r11,r11,MSR_PR; \
114 beq 1f; \
115 mfspr r1,SPRN_SPRG_THREAD; /* if from user, start at top of */\
116 lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
117 addi r1,r1,THREAD_SIZE; \
118 1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
119 tophys(r11,r1); \
120 stw r10,_CCR(r11); /* save various registers */\
121 stw r12,GPR12(r11); \
122 stw r9,GPR9(r11); \
123 mfspr r10,SPRN_SPRG_SCRATCH0; \
124 stw r10,GPR10(r11); \
125 mfspr r12,SPRN_SPRG_SCRATCH1; \
126 stw r12,GPR11(r11); \
127 mflr r10; \
128 stw r10,_LINK(r11); \
129 mfspr r10,SPRN_SPRG_SCRATCH2; \
130 mfspr r12,SPRN_SRR0; \
131 stw r10,GPR1(r11); \
132 mfspr r9,SPRN_SRR1; \
133 stw r10,0(r11); \
134 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
135 stw r0,GPR0(r11); \
136 SAVE_4GPRS(3, r11); \
137 SAVE_2GPRS(7, r11)
139 /*
140 * Exception prolog for critical exceptions. This is a little different
141 * from the normal exception prolog above since a critical exception
142 * can potentially occur at any point during normal exception processing.
143 * Thus we cannot use the same SPRG registers as the normal prolog above.
144 * Instead we use a couple of words of memory at low physical addresses.
145 * This is OK since we don't support SMP on these processors.
146 */
147 #define CRITICAL_EXCEPTION_PROLOG \
148 stw r10,crit_r10@l(0); /* save two registers to work with */\
149 stw r11,crit_r11@l(0); \
150 mfcr r10; /* save CR in r10 for now */\
151 mfspr r11,SPRN_SRR3; /* check whether user or kernel */\
152 andi. r11,r11,MSR_PR; \
153 lis r11,critirq_ctx@ha; \
154 tophys(r11,r11); \
155 lwz r11,critirq_ctx@l(r11); \
156 beq 1f; \
157 /* COMING FROM USER MODE */ \
158 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
159 lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
160 1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\
161 tophys(r11,r11); \
162 stw r10,_CCR(r11); /* save various registers */\
163 stw r12,GPR12(r11); \
164 stw r9,GPR9(r11); \
165 mflr r10; \
166 stw r10,_LINK(r11); \
167 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
168 stw r12,_DEAR(r11); /* since they may have had stuff */\
169 mfspr r9,SPRN_ESR; /* in them at the point where the */\
170 stw r9,_ESR(r11); /* exception was taken */\
171 mfspr r12,SPRN_SRR2; \
172 stw r1,GPR1(r11); \
173 mfspr r9,SPRN_SRR3; \
174 stw r1,0(r11); \
175 tovirt(r1,r11); \
176 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
177 stw r0,GPR0(r11); \
178 SAVE_4GPRS(3, r11); \
179 SAVE_2GPRS(7, r11)
181 /*
182 * State at this point:
183 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
184 * r10 saved in crit_r10 and in stack frame, trashed
185 * r11 saved in crit_r11 and in stack frame,
186 * now phys stack/exception frame pointer
187 * r12 saved in stack frame, now saved SRR2
188 * CR saved in stack frame, CR0.EQ = !SRR3.PR
189 * LR, DEAR, ESR in stack frame
190 * r1 saved in stack frame, now virt stack/excframe pointer
191 * r0, r3-r8 saved in stack frame
192 */
194 /*
195 * Exception vectors.
196 */
197 #define START_EXCEPTION(n, label) \
198 . = n; \
199 label:
201 #define EXCEPTION(n, label, hdlr, xfer) \
202 START_EXCEPTION(n, label); \
203 NORMAL_EXCEPTION_PROLOG; \
204 addi r3,r1,STACK_FRAME_OVERHEAD; \
205 xfer(n, hdlr)
207 #define CRITICAL_EXCEPTION(n, label, hdlr) \
208 START_EXCEPTION(n, label); \
209 CRITICAL_EXCEPTION_PROLOG; \
210 addi r3,r1,STACK_FRAME_OVERHEAD; \
211 EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
212 NOCOPY, crit_transfer_to_handler, \
213 ret_from_crit_exc)
215 #define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
216 li r10,trap; \
217 stw r10,_TRAP(r11); \
218 lis r10,msr@h; \
219 ori r10,r10,msr@l; \
220 copyee(r10, r9); \
221 bl tfer; \
222 .long hdlr; \
223 .long ret
225 #define COPY_EE(d, s) rlwimi d,s,0,16,16
226 #define NOCOPY(d, s)
228 #define EXC_XFER_STD(n, hdlr) \
229 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
230 ret_from_except_full)
232 #define EXC_XFER_LITE(n, hdlr) \
233 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
234 ret_from_except)
236 #define EXC_XFER_EE(n, hdlr) \
237 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
238 ret_from_except_full)
240 #define EXC_XFER_EE_LITE(n, hdlr) \
241 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
242 ret_from_except)
245 /*
246 * 0x0100 - Critical Interrupt Exception
247 */
248 CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
250 /*
251 * 0x0200 - Machine Check Exception
252 */
253 CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
255 /*
256 * 0x0300 - Data Storage Exception
257 * This happens for just a few reasons. U0 set (but we don't do that),
258 * or zone protection fault (user violation, write to protected page).
259 * If this is just an update of modified status, we do that quickly
260 * and exit. Otherwise, we call heavywight functions to do the work.
261 */
262 START_EXCEPTION(0x0300, DataStorage)
263 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
264 mtspr SPRN_SPRG_SCRATCH1, r11
265 #ifdef CONFIG_403GCX
266 stw r12, 0(r0)
267 stw r9, 4(r0)
268 mfcr r11
269 mfspr r12, SPRN_PID
270 stw r11, 8(r0)
271 stw r12, 12(r0)
272 #else
273 mtspr SPRN_SPRG_SCRATCH3, r12
274 mtspr SPRN_SPRG_SCRATCH4, r9
275 mfcr r11
276 mfspr r12, SPRN_PID
277 mtspr SPRN_SPRG_SCRATCH6, r11
278 mtspr SPRN_SPRG_SCRATCH5, r12
279 #endif
281 /* First, check if it was a zone fault (which means a user
282 * tried to access a kernel or read-protected page - always
283 * a SEGV). All other faults here must be stores, so no
284 * need to check ESR_DST as well. */
285 mfspr r10, SPRN_ESR
286 andis. r10, r10, ESR_DIZ@h
287 bne 2f
289 mfspr r10, SPRN_DEAR /* Get faulting address */
291 /* If we are faulting a kernel address, we have to use the
292 * kernel page tables.
293 */
294 lis r11, PAGE_OFFSET@h
295 cmplw r10, r11
296 blt+ 3f
297 lis r11, swapper_pg_dir@h
298 ori r11, r11, swapper_pg_dir@l
299 li r9, 0
300 mtspr SPRN_PID, r9 /* TLB will have 0 TID */
301 b 4f
303 /* Get the PGD for the current thread.
304 */
305 3:
306 mfspr r11,SPRN_SPRG_THREAD
307 lwz r11,PGDIR(r11)
308 4:
309 tophys(r11, r11)
310 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
311 lwz r11, 0(r11) /* Get L1 entry */
312 rlwinm. r12, r11, 0, 0, 19 /* Extract L2 (pte) base address */
313 beq 2f /* Bail if no table */
315 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
316 lwz r11, 0(r12) /* Get Linux PTE */
318 andi. r9, r11, _PAGE_RW /* Is it writeable? */
319 beq 2f /* Bail if not */
321 /* Update 'changed'.
322 */
323 ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
324 stw r11, 0(r12) /* Update Linux page table */
326 /* Most of the Linux PTE is ready to load into the TLB LO.
327 * We set ZSEL, where only the LS-bit determines user access.
328 * We set execute, because we don't have the granularity to
329 * properly set this at the page level (Linux problem).
330 * If shared is set, we cause a zero PID->TID load.
331 * Many of these bits are software only. Bits we don't set
332 * here we (properly should) assume have the appropriate value.
333 */
334 li r12, 0x0ce2
335 andc r11, r11, r12 /* Make sure 20, 21 are zero */
337 /* find the TLB index that caused the fault. It has to be here.
338 */
339 tlbsx r9, 0, r10
341 tlbwe r11, r9, TLB_DATA /* Load TLB LO */
343 /* Done...restore registers and get out of here.
344 */
345 #ifdef CONFIG_403GCX
346 lwz r12, 12(r0)
347 lwz r11, 8(r0)
348 mtspr SPRN_PID, r12
349 mtcr r11
350 lwz r9, 4(r0)
351 lwz r12, 0(r0)
352 #else
353 mfspr r12, SPRN_SPRG_SCRATCH5
354 mfspr r11, SPRN_SPRG_SCRATCH6
355 mtspr SPRN_PID, r12
356 mtcr r11
357 mfspr r9, SPRN_SPRG_SCRATCH4
358 mfspr r12, SPRN_SPRG_SCRATCH3
359 #endif
360 mfspr r11, SPRN_SPRG_SCRATCH1
361 mfspr r10, SPRN_SPRG_SCRATCH0
362 PPC405_ERR77_SYNC
363 rfi /* Should sync shadow TLBs */
364 b . /* prevent prefetch past rfi */
366 2:
367 /* The bailout. Restore registers to pre-exception conditions
368 * and call the heavyweights to help us out.
369 */
370 #ifdef CONFIG_403GCX
371 lwz r12, 12(r0)
372 lwz r11, 8(r0)
373 mtspr SPRN_PID, r12
374 mtcr r11
375 lwz r9, 4(r0)
376 lwz r12, 0(r0)
377 #else
378 mfspr r12, SPRN_SPRG_SCRATCH5
379 mfspr r11, SPRN_SPRG_SCRATCH6
380 mtspr SPRN_PID, r12
381 mtcr r11
382 mfspr r9, SPRN_SPRG_SCRATCH4
383 mfspr r12, SPRN_SPRG_SCRATCH3
384 #endif
385 mfspr r11, SPRN_SPRG_SCRATCH1
386 mfspr r10, SPRN_SPRG_SCRATCH0
387 b DataAccess
389 /*
390 * 0x0400 - Instruction Storage Exception
391 * This is caused by a fetch from non-execute or guarded pages.
392 */
393 START_EXCEPTION(0x0400, InstructionAccess)
394 NORMAL_EXCEPTION_PROLOG
395 mr r4,r12 /* Pass SRR0 as arg2 */
396 li r5,0 /* Pass zero as arg3 */
397 EXC_XFER_LITE(0x400, handle_page_fault)
399 /* 0x0500 - External Interrupt Exception */
400 EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
402 /* 0x0600 - Alignment Exception */
403 START_EXCEPTION(0x0600, Alignment)
404 NORMAL_EXCEPTION_PROLOG
405 mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
406 stw r4,_DEAR(r11)
407 addi r3,r1,STACK_FRAME_OVERHEAD
408 EXC_XFER_EE(0x600, alignment_exception)
410 /* 0x0700 - Program Exception */
411 START_EXCEPTION(0x0700, ProgramCheck)
412 NORMAL_EXCEPTION_PROLOG
413 mfspr r4,SPRN_ESR /* Grab the ESR and save it */
414 stw r4,_ESR(r11)
415 addi r3,r1,STACK_FRAME_OVERHEAD
416 EXC_XFER_STD(0x700, program_check_exception)
418 EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
419 EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
420 EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
421 EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
423 /* 0x0C00 - System Call Exception */
424 START_EXCEPTION(0x0C00, SystemCall)
425 NORMAL_EXCEPTION_PROLOG
426 EXC_XFER_EE_LITE(0xc00, DoSyscall)
428 EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
429 EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
430 EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
432 /* 0x1000 - Programmable Interval Timer (PIT) Exception */
433 START_EXCEPTION(0x1000, Decrementer)
434 NORMAL_EXCEPTION_PROLOG
435 lis r0,TSR_PIS@h
436 mtspr SPRN_TSR,r0 /* Clear the PIT exception */
437 addi r3,r1,STACK_FRAME_OVERHEAD
438 EXC_XFER_LITE(0x1000, timer_interrupt)
440 #if 0
441 /* NOTE:
442 * FIT and WDT handlers are not implemented yet.
443 */
445 /* 0x1010 - Fixed Interval Timer (FIT) Exception
446 */
447 STND_EXCEPTION(0x1010, FITException, unknown_exception)
449 /* 0x1020 - Watchdog Timer (WDT) Exception
450 */
451 #ifdef CONFIG_BOOKE_WDT
452 CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
453 #else
454 CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception)
455 #endif
456 #endif
458 /* 0x1100 - Data TLB Miss Exception
459 * As the name implies, translation is not in the MMU, so search the
460 * page tables and fix it. The only purpose of this function is to
461 * load TLB entries from the page table if they exist.
462 */
463 START_EXCEPTION(0x1100, DTLBMiss)
464 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
465 mtspr SPRN_SPRG_SCRATCH1, r11
466 #ifdef CONFIG_403GCX
467 stw r12, 0(r0)
468 stw r9, 4(r0)
469 mfcr r11
470 mfspr r12, SPRN_PID
471 stw r11, 8(r0)
472 stw r12, 12(r0)
473 #else
474 mtspr SPRN_SPRG_SCRATCH3, r12
475 mtspr SPRN_SPRG_SCRATCH4, r9
476 mfcr r11
477 mfspr r12, SPRN_PID
478 mtspr SPRN_SPRG_SCRATCH6, r11
479 mtspr SPRN_SPRG_SCRATCH5, r12
480 #endif
481 mfspr r10, SPRN_DEAR /* Get faulting address */
483 /* If we are faulting a kernel address, we have to use the
484 * kernel page tables.
485 */
486 lis r11, PAGE_OFFSET@h
487 cmplw r10, r11
488 blt+ 3f
489 lis r11, swapper_pg_dir@h
490 ori r11, r11, swapper_pg_dir@l
491 li r9, 0
492 mtspr SPRN_PID, r9 /* TLB will have 0 TID */
493 b 4f
495 /* Get the PGD for the current thread.
496 */
497 3:
498 mfspr r11,SPRN_SPRG_THREAD
499 lwz r11,PGDIR(r11)
500 4:
501 tophys(r11, r11)
502 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
503 lwz r12, 0(r11) /* Get L1 entry */
504 andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
505 beq 2f /* Bail if no table */
507 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
508 lwz r11, 0(r12) /* Get Linux PTE */
509 andi. r9, r11, _PAGE_PRESENT
510 beq 5f
512 ori r11, r11, _PAGE_ACCESSED
513 stw r11, 0(r12)
515 /* Create TLB tag. This is the faulting address plus a static
516 * set of bits. These are size, valid, E, U0.
517 */
518 li r12, 0x00c0
519 rlwimi r10, r12, 0, 20, 31
521 b finish_tlb_load
523 2: /* Check for possible large-page pmd entry */
524 rlwinm. r9, r12, 2, 22, 24
525 beq 5f
527 /* Create TLB tag. This is the faulting address, plus a static
528 * set of bits (valid, E, U0) plus the size from the PMD.
529 */
530 ori r9, r9, 0x40
531 rlwimi r10, r9, 0, 20, 31
532 mr r11, r12
534 b finish_tlb_load
536 5:
537 /* The bailout. Restore registers to pre-exception conditions
538 * and call the heavyweights to help us out.
539 */
540 #ifdef CONFIG_403GCX
541 lwz r12, 12(r0)
542 lwz r11, 8(r0)
543 mtspr SPRN_PID, r12
544 mtcr r11
545 lwz r9, 4(r0)
546 lwz r12, 0(r0)
547 #else
548 mfspr r12, SPRN_SPRG_SCRATCH5
549 mfspr r11, SPRN_SPRG_SCRATCH6
550 mtspr SPRN_PID, r12
551 mtcr r11
552 mfspr r9, SPRN_SPRG_SCRATCH4
553 mfspr r12, SPRN_SPRG_SCRATCH3
554 #endif
555 mfspr r11, SPRN_SPRG_SCRATCH1
556 mfspr r10, SPRN_SPRG_SCRATCH0
557 b DataAccess
559 /* 0x1200 - Instruction TLB Miss Exception
560 * Nearly the same as above, except we get our information from different
561 * registers and bailout to a different point.
562 */
563 START_EXCEPTION(0x1200, ITLBMiss)
564 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
565 mtspr SPRN_SPRG_SCRATCH1, r11
566 #ifdef CONFIG_403GCX
567 stw r12, 0(r0)
568 stw r9, 4(r0)
569 mfcr r11
570 mfspr r12, SPRN_PID
571 stw r11, 8(r0)
572 stw r12, 12(r0)
573 #else
574 mtspr SPRN_SPRG_SCRATCH3, r12
575 mtspr SPRN_SPRG_SCRATCH4, r9
576 mfcr r11
577 mfspr r12, SPRN_PID
578 mtspr SPRN_SPRG_SCRATCH6, r11
579 mtspr SPRN_SPRG_SCRATCH5, r12
580 #endif
581 mfspr r10, SPRN_SRR0 /* Get faulting address */
583 /* If we are faulting a kernel address, we have to use the
584 * kernel page tables.
585 */
586 lis r11, PAGE_OFFSET@h
587 cmplw r10, r11
588 blt+ 3f
589 lis r11, swapper_pg_dir@h
590 ori r11, r11, swapper_pg_dir@l
591 li r9, 0
592 mtspr SPRN_PID, r9 /* TLB will have 0 TID */
593 b 4f
595 /* Get the PGD for the current thread.
596 */
597 3:
598 mfspr r11,SPRN_SPRG_THREAD
599 lwz r11,PGDIR(r11)
600 4:
601 tophys(r11, r11)
602 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
603 lwz r12, 0(r11) /* Get L1 entry */
604 andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
605 beq 2f /* Bail if no table */
607 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
608 lwz r11, 0(r12) /* Get Linux PTE */
609 andi. r9, r11, _PAGE_PRESENT
610 beq 5f
612 ori r11, r11, _PAGE_ACCESSED
613 stw r11, 0(r12)
615 /* Create TLB tag. This is the faulting address plus a static
616 * set of bits. These are size, valid, E, U0.
617 */
618 li r12, 0x00c0
619 rlwimi r10, r12, 0, 20, 31
621 b finish_tlb_load
623 2: /* Check for possible large-page pmd entry */
624 rlwinm. r9, r12, 2, 22, 24
625 beq 5f
627 /* Create TLB tag. This is the faulting address, plus a static
628 * set of bits (valid, E, U0) plus the size from the PMD.
629 */
630 ori r9, r9, 0x40
631 rlwimi r10, r9, 0, 20, 31
632 mr r11, r12
634 b finish_tlb_load
636 5:
637 /* The bailout. Restore registers to pre-exception conditions
638 * and call the heavyweights to help us out.
639 */
640 #ifdef CONFIG_403GCX
641 lwz r12, 12(r0)
642 lwz r11, 8(r0)
643 mtspr SPRN_PID, r12
644 mtcr r11
645 lwz r9, 4(r0)
646 lwz r12, 0(r0)
647 #else
648 mfspr r12, SPRN_SPRG_SCRATCH5
649 mfspr r11, SPRN_SPRG_SCRATCH6
650 mtspr SPRN_PID, r12
651 mtcr r11
652 mfspr r9, SPRN_SPRG_SCRATCH4
653 mfspr r12, SPRN_SPRG_SCRATCH3
654 #endif
655 mfspr r11, SPRN_SPRG_SCRATCH1
656 mfspr r10, SPRN_SPRG_SCRATCH0
657 b InstructionAccess
659 EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
660 EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
661 EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
662 EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
663 #ifdef CONFIG_IBM405_ERR51
664 /* 405GP errata 51 */
665 START_EXCEPTION(0x1700, Trap_17)
666 b DTLBMiss
667 #else
668 EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
669 #endif
670 EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
671 EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
672 EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
673 EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
674 EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
675 EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
676 EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
677 EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
679 /* Check for a single step debug exception while in an exception
680 * handler before state has been saved. This is to catch the case
681 * where an instruction that we are trying to single step causes
682 * an exception (eg ITLB/DTLB miss) and thus the first instruction of
683 * the exception handler generates a single step debug exception.
684 *
685 * If we get a debug trap on the first instruction of an exception handler,
686 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
687 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
688 * The exception handler was handling a non-critical interrupt, so it will
689 * save (and later restore) the MSR via SPRN_SRR1, which will still have
690 * the MSR_DE bit set.
691 */
692 /* 0x2000 - Debug Exception */
693 START_EXCEPTION(0x2000, DebugTrap)
694 CRITICAL_EXCEPTION_PROLOG
696 /*
697 * If this is a single step or branch-taken exception in an
698 * exception entry sequence, it was probably meant to apply to
699 * the code where the exception occurred (since exception entry
700 * doesn't turn off DE automatically). We simulate the effect
701 * of turning off DE on entry to an exception handler by turning
702 * off DE in the SRR3 value and clearing the debug status.
703 */
704 mfspr r10,SPRN_DBSR /* check single-step/branch taken */
705 andis. r10,r10,DBSR_IC@h
706 beq+ 2f
708 andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */
709 beq 1f /* branch and fix it up */
711 mfspr r10,SPRN_SRR2 /* Faulting instruction address */
712 cmplwi r10,0x2100
713 bgt+ 2f /* address above exception vectors */
715 /* here it looks like we got an inappropriate debug exception. */
716 1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */
717 lis r10,DBSR_IC@h /* clear the IC event */
718 mtspr SPRN_DBSR,r10
719 /* restore state and get out */
720 lwz r10,_CCR(r11)
721 lwz r0,GPR0(r11)
722 lwz r1,GPR1(r11)
723 mtcrf 0x80,r10
724 mtspr SPRN_SRR2,r12
725 mtspr SPRN_SRR3,r9
726 lwz r9,GPR9(r11)
727 lwz r12,GPR12(r11)
728 lwz r10,crit_r10@l(0)
729 lwz r11,crit_r11@l(0)
730 PPC405_ERR77_SYNC
731 rfci
732 b .
734 /* continue normal handling for a critical exception... */
735 2: mfspr r4,SPRN_DBSR
736 addi r3,r1,STACK_FRAME_OVERHEAD
737 EXC_XFER_TEMPLATE(DebugException, 0x2002, \
738 (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
739 NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
741 /*
742 * The other Data TLB exceptions bail out to this point
743 * if they can't resolve the lightweight TLB fault.
744 */
745 DataAccess:
746 NORMAL_EXCEPTION_PROLOG
747 mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
748 stw r5,_ESR(r11)
749 mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
750 EXC_XFER_LITE(0x300, handle_page_fault)
752 /* Other PowerPC processors, namely those derived from the 6xx-series
753 * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
754 * However, for the 4xx-series processors these are neither defined nor
755 * reserved.
756 */
758 /* Damn, I came up one instruction too many to fit into the
759 * exception space :-). Both the instruction and data TLB
760 * miss get to this point to load the TLB.
761 * r10 - TLB_TAG value
762 * r11 - Linux PTE
763 * r12, r9 - available to use
764 * PID - loaded with proper value when we get here
765 * Upon exit, we reload everything and RFI.
766 * Actually, it will fit now, but oh well.....a common place
767 * to load the TLB.
768 */
769 tlb_4xx_index:
770 .long 0
771 finish_tlb_load:
772 /* load the next available TLB index.
773 */
774 lwz r9, tlb_4xx_index@l(0)
775 addi r9, r9, 1
776 andi. r9, r9, (PPC40X_TLB_SIZE-1)
777 stw r9, tlb_4xx_index@l(0)
779 6:
780 /*
781 * Clear out the software-only bits in the PTE to generate the
782 * TLB_DATA value. These are the bottom 2 bits of the RPM, the
783 * top 3 bits of the zone field, and M.
784 */
785 li r12, 0x0ce2
786 andc r11, r11, r12
788 tlbwe r11, r9, TLB_DATA /* Load TLB LO */
789 tlbwe r10, r9, TLB_TAG /* Load TLB HI */
791 /* Done...restore registers and get out of here.
792 */
793 #ifdef CONFIG_403GCX
794 lwz r12, 12(r0)
795 lwz r11, 8(r0)
796 mtspr SPRN_PID, r12
797 mtcr r11
798 lwz r9, 4(r0)
799 lwz r12, 0(r0)
800 #else
801 mfspr r12, SPRN_SPRG_SCRATCH5
802 mfspr r11, SPRN_SPRG_SCRATCH6
803 mtspr SPRN_PID, r12
804 mtcr r11
805 mfspr r9, SPRN_SPRG_SCRATCH4
806 mfspr r12, SPRN_SPRG_SCRATCH3
807 #endif
808 mfspr r11, SPRN_SPRG_SCRATCH1
809 mfspr r10, SPRN_SPRG_SCRATCH0
810 PPC405_ERR77_SYNC
811 rfi /* Should sync shadow TLBs */
812 b . /* prevent prefetch past rfi */
814 /* extern void giveup_fpu(struct task_struct *prev)
815 *
816 * The PowerPC 4xx family of processors do not have an FPU, so this just
817 * returns.
818 */
819 _ENTRY(giveup_fpu)
820 blr
822 /* This is where the main kernel code starts.
823 */
824 start_here:
826 /* ptr to current */
827 lis r2,init_task@h
828 ori r2,r2,init_task@l
830 /* ptr to phys current thread */
831 tophys(r4,r2)
832 addi r4,r4,THREAD /* init task's THREAD */
833 mtspr SPRN_SPRG_THREAD,r4
835 /* stack */
836 lis r1,init_thread_union@ha
837 addi r1,r1,init_thread_union@l
838 li r0,0
839 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
841 bl early_init /* We have to do this with MMU on */
843 /*
844 * Decide what sort of machine this is and initialize the MMU.
845 */
846 li r3,0
847 mr r4,r31
848 bl machine_init
849 bl MMU_init
851 /* Go back to running unmapped so we can load up new values
852 * and change to using our exception vectors.
853 * On the 4xx, all we have to do is invalidate the TLB to clear
854 * the old 16M byte TLB mappings.
855 */
856 lis r4,2f@h
857 ori r4,r4,2f@l
858 tophys(r4,r4)
859 lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
860 ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
861 mtspr SPRN_SRR0,r4
862 mtspr SPRN_SRR1,r3
863 rfi
864 b . /* prevent prefetch past rfi */
866 /* Load up the kernel context */
867 2:
868 sync /* Flush to memory before changing TLB */
869 tlbia
870 isync /* Flush shadow TLBs */
872 /* set up the PTE pointers for the Abatron bdiGDB.
873 */
874 lis r6, swapper_pg_dir@h
875 ori r6, r6, swapper_pg_dir@l
876 lis r5, abatron_pteptrs@h
877 ori r5, r5, abatron_pteptrs@l
878 stw r5, 0xf0(r0) /* Must match your Abatron config file */
879 tophys(r5,r5)
880 stw r6, 0(r5)
882 /* Now turn on the MMU for real! */
883 lis r4,MSR_KERNEL@h
884 ori r4,r4,MSR_KERNEL@l
885 lis r3,start_kernel@h
886 ori r3,r3,start_kernel@l
887 mtspr SPRN_SRR0,r3
888 mtspr SPRN_SRR1,r4
889 rfi /* enable MMU and jump to start_kernel */
890 b . /* prevent prefetch past rfi */
892 /* Set up the initial MMU state so we can do the first level of
893 * kernel initialization. This maps the first 16 MBytes of memory 1:1
894 * virtual to physical and more importantly sets the cache mode.
895 */
896 initial_mmu:
897 tlbia /* Invalidate all TLB entries */
898 isync
900 /* We should still be executing code at physical address 0x0000xxxx
901 * at this point. However, start_here is at virtual address
902 * 0xC000xxxx. So, set up a TLB mapping to cover this once
903 * translation is enabled.
904 */
906 lis r3,KERNELBASE@h /* Load the kernel virtual address */
907 ori r3,r3,KERNELBASE@l
908 tophys(r4,r3) /* Load the kernel physical address */
910 iccci r0,r3 /* Invalidate the i-cache before use */
912 /* Load the kernel PID.
913 */
914 li r0,0
915 mtspr SPRN_PID,r0
916 sync
918 /* Configure and load one entry into TLB slots 63 */
919 clrrwi r4,r4,10 /* Mask off the real page number */
920 ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
922 clrrwi r3,r3,10 /* Mask off the effective page number */
923 ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
925 li r0,63 /* TLB slot 63 */
927 tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
928 tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
930 #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
932 /* Load a TLB entry for the UART, so that ppc4xx_progress() can use
933 * the UARTs nice and early. We use a 4k real==virtual mapping. */
935 lis r3,SERIAL_DEBUG_IO_BASE@h
936 ori r3,r3,SERIAL_DEBUG_IO_BASE@l
937 mr r4,r3
938 clrrwi r4,r4,12
939 ori r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
941 clrrwi r3,r3,12
942 ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
944 li r0,0 /* TLB slot 0 */
945 tlbwe r4,r0,TLB_DATA
946 tlbwe r3,r0,TLB_TAG
947 #endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
949 isync
951 /* Establish the exception vector base
952 */
953 lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */
954 tophys(r0,r4) /* Use the physical address */
955 mtspr SPRN_EVPR,r0
957 blr
959 _GLOBAL(abort)
960 mfspr r13,SPRN_DBCR0
961 oris r13,r13,DBCR0_RST_SYSTEM@h
962 mtspr SPRN_DBCR0,r13
964 _GLOBAL(set_context)
966 #ifdef CONFIG_BDI_SWITCH
967 /* Context switch the PTE pointer for the Abatron BDI2000.
968 * The PGDIR is the second parameter.
969 */
970 lis r5, KERNELBASE@h
971 lwz r5, 0xf0(r5)
972 stw r4, 0x4(r5)
973 #endif
974 sync
975 mtspr SPRN_PID,r3
976 isync /* Need an isync to flush shadow */
977 /* TLBs after changing PID */
978 blr
980 /* We put a few things here that have to be page-aligned. This stuff
981 * goes at the beginning of the data segment, which is page-aligned.
982 */
983 .data
984 .align 12
985 .globl sdata
986 sdata:
987 .globl empty_zero_page
988 empty_zero_page:
989 .space 4096
990 .globl swapper_pg_dir
991 swapper_pg_dir:
992 .space PGD_TABLE_SIZE
994 /* Room for two PTE pointers, usually the kernel and current user pointers
995 * to their respective root page table.
996 */
997 abatron_pteptrs:
998 .space 8