| blob | 1649117e6087d3eb7462c4a73452654d32a29e00 |
1 0 Unnamed devices (e.g. non-device mounts)
2 0 = reserved as null device number
3 See block major 144, 145, 146 for expansion areas.
5 1 char Memory devices
6 1 = /dev/mem Physical memory access
7 2 = /dev/kmem Kernel virtual memory access
8 3 = /dev/null Null device
9 4 = /dev/port I/O port access
10 5 = /dev/zero Null byte source
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
12 7 = /dev/full Returns ENOSPC on write
13 8 = /dev/random Nondeterministic random number gen.
14 9 = /dev/urandom Faster, less secure random number gen.
15 10 = /dev/aio Asynchronous I/O notification interface
16 11 = /dev/kmsg Writes to this come out as printk's, reads
17 export the buffered printk records.
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
20 1 block RAM disk
21 0 = /dev/ram0 First RAM disk
22 1 = /dev/ram1 Second RAM disk
23 ...
24 250 = /dev/initrd Initial RAM disk
26 Older kernels had /dev/ramdisk (1, 1) here.
27 /dev/initrd refers to a RAM disk which was preloaded
28 by the boot loader; newer kernels use /dev/ram0 for
29 the initrd.
31 2 char Pseudo-TTY masters
32 0 = /dev/ptyp0 First PTY master
33 1 = /dev/ptyp1 Second PTY master
34 ...
35 255 = /dev/ptyef 256th PTY master
37 Pseudo-tty's are named as follows:
38 * Masters are "pty", slaves are "tty";
39 * the fourth letter is one of pqrstuvwxyzabcde indicating
40 the 1st through 16th series of 16 pseudo-ttys each, and
41 * the fifth letter is one of 0123456789abcdef indicating
42 the position within the series.
44 These are the old-style (BSD) PTY devices; Unix98
45 devices are on major 128 and above and use the PTY
46 master multiplex (/dev/ptmx) to acquire a PTY on
47 demand.
49 2 block Floppy disks
50 0 = /dev/fd0 Controller 0, drive 0, autodetect
51 1 = /dev/fd1 Controller 0, drive 1, autodetect
52 2 = /dev/fd2 Controller 0, drive 2, autodetect
53 3 = /dev/fd3 Controller 0, drive 3, autodetect
54 128 = /dev/fd4 Controller 1, drive 0, autodetect
55 129 = /dev/fd5 Controller 1, drive 1, autodetect
56 130 = /dev/fd6 Controller 1, drive 2, autodetect
57 131 = /dev/fd7 Controller 1, drive 3, autodetect
59 To specify format, add to the autodetect device number:
60 0 = /dev/fd? Autodetect format
61 4 = /dev/fd?d360 5.25" 360K in a 360K drive(1)
62 20 = /dev/fd?h360 5.25" 360K in a 1200K drive(1)
63 48 = /dev/fd?h410 5.25" 410K in a 1200K drive
64 64 = /dev/fd?h420 5.25" 420K in a 1200K drive
65 24 = /dev/fd?h720 5.25" 720K in a 1200K drive
66 80 = /dev/fd?h880 5.25" 880K in a 1200K drive(1)
67 8 = /dev/fd?h1200 5.25" 1200K in a 1200K drive(1)
68 40 = /dev/fd?h1440 5.25" 1440K in a 1200K drive(1)
69 56 = /dev/fd?h1476 5.25" 1476K in a 1200K drive
70 72 = /dev/fd?h1494 5.25" 1494K in a 1200K drive
71 92 = /dev/fd?h1600 5.25" 1600K in a 1200K drive(1)
73 12 = /dev/fd?u360 3.5" 360K Double Density(2)
74 16 = /dev/fd?u720 3.5" 720K Double Density(1)
75 120 = /dev/fd?u800 3.5" 800K Double Density(2)
76 52 = /dev/fd?u820 3.5" 820K Double Density
77 68 = /dev/fd?u830 3.5" 830K Double Density
78 84 = /dev/fd?u1040 3.5" 1040K Double Density(1)
79 88 = /dev/fd?u1120 3.5" 1120K Double Density(1)
80 28 = /dev/fd?u1440 3.5" 1440K High Density(1)
81 124 = /dev/fd?u1600 3.5" 1600K High Density(1)
82 44 = /dev/fd?u1680 3.5" 1680K High Density(3)
83 60 = /dev/fd?u1722 3.5" 1722K High Density
84 76 = /dev/fd?u1743 3.5" 1743K High Density
85 96 = /dev/fd?u1760 3.5" 1760K High Density
86 116 = /dev/fd?u1840 3.5" 1840K High Density(3)
87 100 = /dev/fd?u1920 3.5" 1920K High Density(1)
88 32 = /dev/fd?u2880 3.5" 2880K Extra Density(1)
89 104 = /dev/fd?u3200 3.5" 3200K Extra Density
90 108 = /dev/fd?u3520 3.5" 3520K Extra Density
91 112 = /dev/fd?u3840 3.5" 3840K Extra Density(1)
93 36 = /dev/fd?CompaQ Compaq 2880K drive; obsolete?
95 (1) Autodetectable format
96 (2) Autodetectable format in a Double Density (720K) drive only
97 (3) Autodetectable format in a High Density (1440K) drive only
99 NOTE: The letter in the device name (d, q, h or u)
100 signifies the type of drive: 5.25" Double Density (d),
101 5.25" Quad Density (q), 5.25" High Density (h) or 3.5"
102 (any model, u). The use of the capital letters D, H
103 and E for the 3.5" models have been deprecated, since
104 the drive type is insignificant for these devices.
106 3 char Pseudo-TTY slaves
107 0 = /dev/ttyp0 First PTY slave
108 1 = /dev/ttyp1 Second PTY slave
109 ...
110 255 = /dev/ttyef 256th PTY slave
112 These are the old-style (BSD) PTY devices; Unix98
113 devices are on major 136 and above.
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
119 For partitions, add to the whole disk device number:
120 0 = /dev/hd? Whole disk
121 1 = /dev/hd?1 First partition
122 2 = /dev/hd?2 Second partition
123 ...
124 63 = /dev/hd?63 63rd partition
126 For Linux/i386, partitions 1-4 are the primary
127 partitions, and 5 and above are logical partitions.
128 Other versions of Linux use partitioning schemes
129 appropriate to their respective architectures.
131 4 char TTY devices
132 0 = /dev/tty0 Current virtual console
134 1 = /dev/tty1 First virtual console
135 ...
136 63 = /dev/tty63 63rd virtual console
137 64 = /dev/ttyS0 First UART serial port
138 ...
139 255 = /dev/ttyS191 192nd UART serial port
141 UART serial ports refer to 8250/16450/16550 series devices.
143 Older versions of the Linux kernel used this major
144 number for BSD PTY devices. As of Linux 2.1.115, this
145 is no longer supported. Use major numbers 2 and 3.
147 4 block Aliases for dynamically allocated major devices to be used
148 when its not possible to create the real device nodes
149 because the root filesystem is mounted read-only.
151 0 = /dev/root
153 5 char Alternate TTY devices
154 0 = /dev/tty Current TTY device
155 1 = /dev/console System console
156 2 = /dev/ptmx PTY master multiplex
157 3 = /dev/ttyprintk User messages via printk TTY device
158 64 = /dev/cua0 Callout device for ttyS0
159 ...
160 255 = /dev/cua191 Callout device for ttyS191
162 (5,1) is /dev/console starting with Linux 2.1.71. See
163 the section on terminal devices for more information
164 on /dev/console.
166 6 char Parallel printer devices
167 0 = /dev/lp0 Parallel printer on parport0
168 1 = /dev/lp1 Parallel printer on parport1
169 ...
171 Current Linux kernels no longer have a fixed mapping
172 between parallel ports and I/O addresses. Instead,
173 they are redirected through the parport multiplex layer.
175 7 char Virtual console capture devices
176 0 = /dev/vcs Current vc text (glyph) contents
177 1 = /dev/vcs1 tty1 text (glyph) contents
178 ...
179 63 = /dev/vcs63 tty63 text (glyph) contents
180 64 = /dev/vcsu Current vc text (unicode) contents
181 65 = /dev/vcsu1 tty1 text (unicode) contents
182 ...
183 127 = /dev/vcsu63 tty63 text (unicode) contents
184 128 = /dev/vcsa Current vc text/attribute (glyph) contents
185 129 = /dev/vcsa1 tty1 text/attribute (glyph) contents
186 ...
187 191 = /dev/vcsa63 tty63 text/attribute (glyph) contents
189 NOTE: These devices permit both read and write access.
191 7 block Loopback devices
192 0 = /dev/loop0 First loop device
193 1 = /dev/loop1 Second loop device
194 ...
196 The loop devices are used to mount filesystems not
197 associated with block devices. The binding to the
198 loop devices is handled by mount(8) or losetup(8).
200 8 block SCSI disk devices (0-15)
201 0 = /dev/sda First SCSI disk whole disk
202 16 = /dev/sdb Second SCSI disk whole disk
203 32 = /dev/sdc Third SCSI disk whole disk
204 ...
205 240 = /dev/sdp Sixteenth SCSI disk whole disk
207 Partitions are handled in the same way as for IDE
208 disks (see major number 3) except that the limit on
209 partitions is 15.
211 9 char SCSI tape devices
212 0 = /dev/st0 First SCSI tape, mode 0
213 1 = /dev/st1 Second SCSI tape, mode 0
214 ...
215 32 = /dev/st0l First SCSI tape, mode 1
216 33 = /dev/st1l Second SCSI tape, mode 1
217 ...
218 64 = /dev/st0m First SCSI tape, mode 2
219 65 = /dev/st1m Second SCSI tape, mode 2
220 ...
221 96 = /dev/st0a First SCSI tape, mode 3
222 97 = /dev/st1a Second SCSI tape, mode 3
223 ...
224 128 = /dev/nst0 First SCSI tape, mode 0, no rewind
225 129 = /dev/nst1 Second SCSI tape, mode 0, no rewind
226 ...
227 160 = /dev/nst0l First SCSI tape, mode 1, no rewind
228 161 = /dev/nst1l Second SCSI tape, mode 1, no rewind
229 ...
230 192 = /dev/nst0m First SCSI tape, mode 2, no rewind
231 193 = /dev/nst1m Second SCSI tape, mode 2, no rewind
232 ...
233 224 = /dev/nst0a First SCSI tape, mode 3, no rewind
234 225 = /dev/nst1a Second SCSI tape, mode 3, no rewind
235 ...
237 "No rewind" refers to the omission of the default
238 automatic rewind on device close. The MTREW or MTOFFL
239 ioctl()'s can be used to rewind the tape regardless of
240 the device used to access it.
242 9 block Metadisk (RAID) devices
243 0 = /dev/md0 First metadisk group
244 1 = /dev/md1 Second metadisk group
245 ...
247 The metadisk driver is used to span a
248 filesystem across multiple physical disks.
250 10 char Non-serial mice, misc features
251 0 = /dev/logibm Logitech bus mouse
252 1 = /dev/psaux PS/2-style mouse port
253 2 = /dev/inportbm Microsoft Inport bus mouse
254 3 = /dev/atibm ATI XL bus mouse
255 4 = /dev/jbm J-mouse
256 4 = /dev/amigamouse Amiga mouse (68k/Amiga)
257 5 = /dev/atarimouse Atari mouse
258 6 = /dev/sunmouse Sun mouse
259 7 = /dev/amigamouse1 Second Amiga mouse
260 8 = /dev/smouse Simple serial mouse driver
261 9 = /dev/pc110pad IBM PC-110 digitizer pad
262 10 = /dev/adbmouse Apple Desktop Bus mouse
263 11 = /dev/vrtpanel Vr41xx embedded touch panel
264 13 = /dev/vpcmouse Connectix Virtual PC Mouse
265 14 = /dev/touchscreen/ucb1x00 UCB 1x00 touchscreen
266 15 = /dev/touchscreen/mk712 MK712 touchscreen
267 128 = /dev/beep Fancy beep device
268 129 =
269 130 = /dev/watchdog Watchdog timer port
270 131 = /dev/temperature Machine internal temperature
271 132 = /dev/hwtrap Hardware fault trap
272 133 = /dev/exttrp External device trap
273 134 = /dev/apm_bios Advanced Power Management BIOS
274 135 = /dev/rtc Real Time Clock
275 137 = /dev/vhci Bluetooth virtual HCI driver
276 139 = /dev/openprom SPARC OpenBoot PROM
277 140 = /dev/relay8 Berkshire Products Octal relay card
278 141 = /dev/relay16 Berkshire Products ISO-16 relay card
279 142 =
280 143 = /dev/pciconf PCI configuration space
281 144 = /dev/nvram Non-volatile configuration RAM
282 145 = /dev/hfmodem Soundcard shortwave modem control
283 146 = /dev/graphics Linux/SGI graphics device
284 147 = /dev/opengl Linux/SGI OpenGL pipe
285 148 = /dev/gfx Linux/SGI graphics effects device
286 149 = /dev/input/mouse Linux/SGI Irix emulation mouse
287 150 = /dev/input/keyboard Linux/SGI Irix emulation keyboard
288 151 = /dev/led Front panel LEDs
289 152 = /dev/kpoll Kernel Poll Driver
290 153 = /dev/mergemem Memory merge device
291 154 = /dev/pmu Macintosh PowerBook power manager
292 155 = /dev/isictl MultiTech ISICom serial control
293 156 = /dev/lcd Front panel LCD display
294 157 = /dev/ac Applicom Intl Profibus card
295 158 = /dev/nwbutton Netwinder external button
296 159 = /dev/nwdebug Netwinder debug interface
297 160 = /dev/nwflash Netwinder flash memory
298 161 = /dev/userdma User-space DMA access
299 162 = /dev/smbus System Management Bus
300 163 = /dev/lik Logitech Internet Keyboard
301 164 = /dev/ipmo Intel Intelligent Platform Management
302 165 = /dev/vmmon VMware virtual machine monitor
303 166 = /dev/i2o/ctl I2O configuration manager
304 167 = /dev/specialix_sxctl Specialix serial control
305 168 = /dev/tcldrv Technology Concepts serial control
306 169 = /dev/specialix_rioctl Specialix RIO serial control
307 170 = /dev/thinkpad/thinkpad IBM Thinkpad devices
308 171 = /dev/srripc QNX4 API IPC manager
309 172 = /dev/usemaclone Semaphore clone device
310 173 = /dev/ipmikcs Intelligent Platform Management
311 174 = /dev/uctrl SPARCbook 3 microcontroller
312 175 = /dev/agpgart AGP Graphics Address Remapping Table
313 176 = /dev/gtrsc Gorgy Timing radio clock
314 177 = /dev/cbm Serial CBM bus
315 178 = /dev/jsflash JavaStation OS flash SIMM
316 179 = /dev/xsvc High-speed shared-mem/semaphore service
317 180 = /dev/vrbuttons Vr41xx button input device
318 181 = /dev/toshiba Toshiba laptop SMM support
319 182 = /dev/perfctr Performance-monitoring counters
320 183 = /dev/hwrng Generic random number generator
321 184 = /dev/cpu/microcode CPU microcode update interface
322 186 = /dev/atomicps Atomic shapshot of process state data
323 187 = /dev/irnet IrNET device
324 188 = /dev/smbusbios SMBus BIOS
325 189 = /dev/ussp_ctl User space serial port control
326 190 = /dev/crash Mission Critical Linux crash dump facility
327 191 = /dev/pcl181 <information missing>
328 192 = /dev/nas_xbus NAS xbus LCD/buttons access
329 193 = /dev/d7s SPARC 7-segment display
330 194 = /dev/zkshim Zero-Knowledge network shim control
331 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
332 196 = /dev/vfio/vfio VFIO userspace driver interface
333 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
334 198 = /dev/sexec Signed executable interface
335 199 = /dev/scanners/cuecat :CueCat barcode scanner
336 200 = /dev/net/tun TAP/TUN network device
337 201 = /dev/button/gulpb Transmeta GULP-B buttons
338 202 = /dev/emd/ctl Enhanced Metadisk RAID (EMD) control
339 203 = /dev/cuse Cuse (character device in user-space)
340 204 = /dev/video/em8300 EM8300 DVD decoder control
341 205 = /dev/video/em8300_mv EM8300 DVD decoder video
342 206 = /dev/video/em8300_ma EM8300 DVD decoder audio
343 207 = /dev/video/em8300_sp EM8300 DVD decoder subpicture
344 208 = /dev/compaq/cpqphpc Compaq PCI Hot Plug Controller
345 209 = /dev/compaq/cpqrid Compaq Remote Insight Driver
346 210 = /dev/impi/bt IMPI coprocessor block transfer
347 211 = /dev/impi/smic IMPI coprocessor stream interface
348 212 = /dev/watchdogs/0 First watchdog device
349 213 = /dev/watchdogs/1 Second watchdog device
350 214 = /dev/watchdogs/2 Third watchdog device
351 215 = /dev/watchdogs/3 Fourth watchdog device
352 216 = /dev/fujitsu/apanel Fujitsu/Siemens application panel
353 217 = /dev/ni/natmotn National Instruments Motion
354 218 = /dev/kchuid Inter-process chuid control
355 219 = /dev/modems/mwave MWave modem firmware upload
356 220 = /dev/mptctl Message passing technology (MPT) control
357 221 = /dev/mvista/hssdsi Montavista PICMG hot swap system driver
358 222 = /dev/mvista/hasi Montavista PICMG high availability
359 223 = /dev/input/uinput User level driver support for input
360 224 = /dev/tpm TCPA TPM driver
361 225 = /dev/pps Pulse Per Second driver
362 226 = /dev/systrace Systrace device
363 227 = /dev/mcelog X86_64 Machine Check Exception driver
364 228 = /dev/hpet HPET driver
365 229 = /dev/fuse Fuse (virtual filesystem in user-space)
366 230 = /dev/midishare MidiShare driver
367 231 = /dev/snapshot System memory snapshot device
368 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
369 233 = /dev/kmview View-OS A process with a view
370 234 = /dev/btrfs-control Btrfs control device
371 235 = /dev/autofs Autofs control device
372 236 = /dev/mapper/control Device-Mapper control device
373 237 = /dev/loop-control Loopback control device
374 238 = /dev/vhost-net Host kernel accelerator for virtio net
375 239 = /dev/uhid User-space I/O driver support for HID subsystem
376 240 = /dev/userio Serio driver testing device
377 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
379 242-254 Reserved for local use
380 255 Reserved for MISC_DYNAMIC_MINOR
382 11 char Raw keyboard device (Linux/SPARC only)
383 0 = /dev/kbd Raw keyboard device
385 11 char Serial Mux device (Linux/PA-RISC only)
386 0 = /dev/ttyB0 First mux port
387 1 = /dev/ttyB1 Second mux port
388 ...
390 11 block SCSI CD-ROM devices
391 0 = /dev/scd0 First SCSI CD-ROM
392 1 = /dev/scd1 Second SCSI CD-ROM
393 ...
395 The prefix /dev/sr (instead of /dev/scd) has been deprecated.
397 12 char QIC-02 tape
398 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
399 3 = /dev/tpqic11 QIC-11, rewind-on-close
400 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
401 5 = /dev/tpqic24 QIC-24, rewind-on-close
402 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
403 7 = /dev/tpqic120 QIC-120, rewind-on-close
404 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
405 9 = /dev/tpqic150 QIC-150, rewind-on-close
407 The device names specified are proposed -- if there
408 are "standard" names for these devices, please let me know.
410 12 block
412 13 char Input core
413 0 = /dev/input/js0 First joystick
414 1 = /dev/input/js1 Second joystick
415 ...
416 32 = /dev/input/mouse0 First mouse
417 33 = /dev/input/mouse1 Second mouse
418 ...
419 63 = /dev/input/mice Unified mouse
420 64 = /dev/input/event0 First event queue
421 65 = /dev/input/event1 Second event queue
422 ...
424 Each device type has 5 bits (32 minors).
426 13 block Previously used for the XT disk (/dev/xdN)
427 Deleted in kernel v3.9.
429 14 char Open Sound System (OSS)
430 0 = /dev/mixer Mixer control
431 1 = /dev/sequencer Audio sequencer
432 2 = /dev/midi00 First MIDI port
433 3 = /dev/dsp Digital audio
434 4 = /dev/audio Sun-compatible digital audio
435 6 =
436 7 = /dev/audioctl SPARC audio control device
437 8 = /dev/sequencer2 Sequencer -- alternate device
438 16 = /dev/mixer1 Second soundcard mixer control
439 17 = /dev/patmgr0 Sequencer patch manager
440 18 = /dev/midi01 Second MIDI port
441 19 = /dev/dsp1 Second soundcard digital audio
442 20 = /dev/audio1 Second soundcard Sun digital audio
443 33 = /dev/patmgr1 Sequencer patch manager
444 34 = /dev/midi02 Third MIDI port
445 50 = /dev/midi03 Fourth MIDI port
447 14 block
449 15 char Joystick
450 0 = /dev/js0 First analog joystick
451 1 = /dev/js1 Second analog joystick
452 ...
453 128 = /dev/djs0 First digital joystick
454 129 = /dev/djs1 Second digital joystick
455 ...
456 15 block Sony CDU-31A/CDU-33A CD-ROM
457 0 = /dev/sonycd Sony CDU-31a CD-ROM
459 16 char Non-SCSI scanners
460 0 = /dev/gs4500 Genius 4500 handheld scanner
462 16 block GoldStar CD-ROM
463 0 = /dev/gscd GoldStar CD-ROM
465 17 char OBSOLETE (was Chase serial card)
466 0 = /dev/ttyH0 First Chase port
467 1 = /dev/ttyH1 Second Chase port
468 ...
469 17 block Optics Storage CD-ROM
470 0 = /dev/optcd Optics Storage CD-ROM
472 18 char OBSOLETE (was Chase serial card - alternate devices)
473 0 = /dev/cuh0 Callout device for ttyH0
474 1 = /dev/cuh1 Callout device for ttyH1
475 ...
476 18 block Sanyo CD-ROM
477 0 = /dev/sjcd Sanyo CD-ROM
479 19 char Cyclades serial card
480 0 = /dev/ttyC0 First Cyclades port
481 ...
482 31 = /dev/ttyC31 32nd Cyclades port
484 19 block "Double" compressed disk
485 0 = /dev/double0 First compressed disk
486 ...
487 7 = /dev/double7 Eighth compressed disk
488 128 = /dev/cdouble0 Mirror of first compressed disk
489 ...
490 135 = /dev/cdouble7 Mirror of eighth compressed disk
492 See the Double documentation for the meaning of the
493 mirror devices.
495 20 char Cyclades serial card - alternate devices
496 0 = /dev/cub0 Callout device for ttyC0
497 ...
498 31 = /dev/cub31 Callout device for ttyC31
500 20 block Hitachi CD-ROM (under development)
501 0 = /dev/hitcd Hitachi CD-ROM
503 21 char Generic SCSI access
504 0 = /dev/sg0 First generic SCSI device
505 1 = /dev/sg1 Second generic SCSI device
506 ...
508 Most distributions name these /dev/sga, /dev/sgb...;
509 this sets an unnecessary limit of 26 SCSI devices in
510 the system and is counter to standard Linux
511 device-naming practice.
513 21 block Acorn MFM hard drive interface
514 0 = /dev/mfma First MFM drive whole disk
515 64 = /dev/mfmb Second MFM drive whole disk
517 This device is used on the ARM-based Acorn RiscPC.
518 Partitions are handled the same way as for IDE disks
519 (see major number 3).
521 22 char Digiboard serial card
522 0 = /dev/ttyD0 First Digiboard port
523 1 = /dev/ttyD1 Second Digiboard port
524 ...
525 22 block Second IDE hard disk/CD-ROM interface
526 0 = /dev/hdc Master: whole disk (or CD-ROM)
527 64 = /dev/hdd Slave: whole disk (or CD-ROM)
529 Partitions are handled the same way as for the first
530 interface (see major number 3).
532 23 char Digiboard serial card - alternate devices
533 0 = /dev/cud0 Callout device for ttyD0
534 1 = /dev/cud1 Callout device for ttyD1
535 ...
536 23 block Mitsumi proprietary CD-ROM
537 0 = /dev/mcd Mitsumi CD-ROM
539 24 char Stallion serial card
540 0 = /dev/ttyE0 Stallion port 0 card 0
541 1 = /dev/ttyE1 Stallion port 1 card 0
542 ...
543 64 = /dev/ttyE64 Stallion port 0 card 1
544 65 = /dev/ttyE65 Stallion port 1 card 1
545 ...
546 128 = /dev/ttyE128 Stallion port 0 card 2
547 129 = /dev/ttyE129 Stallion port 1 card 2
548 ...
549 192 = /dev/ttyE192 Stallion port 0 card 3
550 193 = /dev/ttyE193 Stallion port 1 card 3
551 ...
552 24 block Sony CDU-535 CD-ROM
553 0 = /dev/cdu535 Sony CDU-535 CD-ROM
555 25 char Stallion serial card - alternate devices
556 0 = /dev/cue0 Callout device for ttyE0
557 1 = /dev/cue1 Callout device for ttyE1
558 ...
559 64 = /dev/cue64 Callout device for ttyE64
560 65 = /dev/cue65 Callout device for ttyE65
561 ...
562 128 = /dev/cue128 Callout device for ttyE128
563 129 = /dev/cue129 Callout device for ttyE129
564 ...
565 192 = /dev/cue192 Callout device for ttyE192
566 193 = /dev/cue193 Callout device for ttyE193
567 ...
568 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
569 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
570 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
571 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
572 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
574 26 char
576 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
577 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
578 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
579 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
580 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
582 27 char QIC-117 tape
583 0 = /dev/qft0 Unit 0, rewind-on-close
584 1 = /dev/qft1 Unit 1, rewind-on-close
585 2 = /dev/qft2 Unit 2, rewind-on-close
586 3 = /dev/qft3 Unit 3, rewind-on-close
587 4 = /dev/nqft0 Unit 0, no rewind-on-close
588 5 = /dev/nqft1 Unit 1, no rewind-on-close
589 6 = /dev/nqft2 Unit 2, no rewind-on-close
590 7 = /dev/nqft3 Unit 3, no rewind-on-close
591 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
592 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
593 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
594 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
595 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
596 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
597 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
598 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
599 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
600 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
601 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
602 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
603 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
604 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
605 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
606 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
608 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
609 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
610 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
611 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
612 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
614 28 char Stallion serial card - card programming
615 0 = /dev/staliomem0 First Stallion card I/O memory
616 1 = /dev/staliomem1 Second Stallion card I/O memory
617 2 = /dev/staliomem2 Third Stallion card I/O memory
618 3 = /dev/staliomem3 Fourth Stallion card I/O memory
620 28 char Atari SLM ACSI laser printer (68k/Atari)
621 0 = /dev/slm0 First SLM laser printer
622 1 = /dev/slm1 Second SLM laser printer
623 ...
624 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
625 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
626 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
627 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
628 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
630 28 block ACSI disk (68k/Atari)
631 0 = /dev/ada First ACSI disk whole disk
632 16 = /dev/adb Second ACSI disk whole disk
633 32 = /dev/adc Third ACSI disk whole disk
634 ...
635 240 = /dev/adp 16th ACSI disk whole disk
637 Partitions are handled in the same way as for IDE
638 disks (see major number 3) except that the limit on
639 partitions is 15, like SCSI.
641 29 char Universal frame buffer
642 0 = /dev/fb0 First frame buffer
643 1 = /dev/fb1 Second frame buffer
644 ...
645 31 = /dev/fb31 32nd frame buffer
647 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
648 0 = /dev/aztcd Aztech CD-ROM
650 30 char iBCS-2 compatibility devices
651 0 = /dev/socksys Socket access
652 1 = /dev/spx SVR3 local X interface
653 32 = /dev/inet/ip Network access
654 33 = /dev/inet/icmp
655 34 = /dev/inet/ggp
656 35 = /dev/inet/ipip
657 36 = /dev/inet/tcp
658 37 = /dev/inet/egp
659 38 = /dev/inet/pup
660 39 = /dev/inet/udp
661 40 = /dev/inet/idp
662 41 = /dev/inet/rawip
664 Additionally, iBCS-2 requires the following links:
666 /dev/ip -> /dev/inet/ip
667 /dev/icmp -> /dev/inet/icmp
668 /dev/ggp -> /dev/inet/ggp
669 /dev/ipip -> /dev/inet/ipip
670 /dev/tcp -> /dev/inet/tcp
671 /dev/egp -> /dev/inet/egp
672 /dev/pup -> /dev/inet/pup
673 /dev/udp -> /dev/inet/udp
674 /dev/idp -> /dev/inet/idp
675 /dev/rawip -> /dev/inet/rawip
676 /dev/inet/arp -> /dev/inet/udp
677 /dev/inet/rip -> /dev/inet/udp
678 /dev/nfsd -> /dev/socksys
679 /dev/X0R -> /dev/null (? apparently not required ?)
681 30 block Philips LMS CM-205 CD-ROM
682 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
684 /dev/lmscd is an older name for this device. This
685 driver does not work with the CM-205MS CD-ROM.
687 31 char MPU-401 MIDI
688 0 = /dev/mpu401data MPU-401 data port
689 1 = /dev/mpu401stat MPU-401 status port
691 31 block ROM/flash memory card
692 0 = /dev/rom0 First ROM card (rw)
693 ...
694 7 = /dev/rom7 Eighth ROM card (rw)
695 8 = /dev/rrom0 First ROM card (ro)
696 ...
697 15 = /dev/rrom7 Eighth ROM card (ro)
698 16 = /dev/flash0 First flash memory card (rw)
699 ...
700 23 = /dev/flash7 Eighth flash memory card (rw)
701 24 = /dev/rflash0 First flash memory card (ro)
702 ...
703 31 = /dev/rflash7 Eighth flash memory card (ro)
705 The read-write (rw) devices support back-caching
706 written data in RAM, as well as writing to flash RAM
707 devices. The read-only devices (ro) support reading
708 only.
710 32 char Specialix serial card
711 0 = /dev/ttyX0 First Specialix port
712 1 = /dev/ttyX1 Second Specialix port
713 ...
714 32 block Philips LMS CM-206 CD-ROM
715 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
717 33 char Specialix serial card - alternate devices
718 0 = /dev/cux0 Callout device for ttyX0
719 1 = /dev/cux1 Callout device for ttyX1
720 ...
721 33 block Third IDE hard disk/CD-ROM interface
722 0 = /dev/hde Master: whole disk (or CD-ROM)
723 64 = /dev/hdf Slave: whole disk (or CD-ROM)
725 Partitions are handled the same way as for the first
726 interface (see major number 3).
728 34 char Z8530 HDLC driver
729 0 = /dev/scc0 First Z8530, first port
730 1 = /dev/scc1 First Z8530, second port
731 2 = /dev/scc2 Second Z8530, first port
732 3 = /dev/scc3 Second Z8530, second port
733 ...
735 In a previous version these devices were named
736 /dev/sc1 for /dev/scc0, /dev/sc2 for /dev/scc1, and so
737 on.
739 34 block Fourth IDE hard disk/CD-ROM interface
740 0 = /dev/hdg Master: whole disk (or CD-ROM)
741 64 = /dev/hdh Slave: whole disk (or CD-ROM)
743 Partitions are handled the same way as for the first
744 interface (see major number 3).
746 35 char tclmidi MIDI driver
747 0 = /dev/midi0 First MIDI port, kernel timed
748 1 = /dev/midi1 Second MIDI port, kernel timed
749 2 = /dev/midi2 Third MIDI port, kernel timed
750 3 = /dev/midi3 Fourth MIDI port, kernel timed
751 64 = /dev/rmidi0 First MIDI port, untimed
752 65 = /dev/rmidi1 Second MIDI port, untimed
753 66 = /dev/rmidi2 Third MIDI port, untimed
754 67 = /dev/rmidi3 Fourth MIDI port, untimed
755 128 = /dev/smpte0 First MIDI port, SMPTE timed
756 129 = /dev/smpte1 Second MIDI port, SMPTE timed
757 130 = /dev/smpte2 Third MIDI port, SMPTE timed
758 131 = /dev/smpte3 Fourth MIDI port, SMPTE timed
760 35 block Slow memory ramdisk
761 0 = /dev/slram Slow memory ramdisk
763 36 char Netlink support
764 0 = /dev/route Routing, device updates, kernel to user
765 1 = /dev/skip enSKIP security cache control
766 3 = /dev/fwmonitor Firewall packet copies
767 16 = /dev/tap0 First Ethertap device
768 ...
769 31 = /dev/tap15 16th Ethertap device
771 36 block OBSOLETE (was MCA ESDI hard disk)
773 37 char IDE tape
774 0 = /dev/ht0 First IDE tape
775 1 = /dev/ht1 Second IDE tape
776 ...
777 128 = /dev/nht0 First IDE tape, no rewind-on-close
778 129 = /dev/nht1 Second IDE tape, no rewind-on-close
779 ...
781 Currently, only one IDE tape drive is supported.
783 37 block Zorro II ramdisk
784 0 = /dev/z2ram Zorro II ramdisk
786 38 char Myricom PCI Myrinet board
787 0 = /dev/mlanai0 First Myrinet board
788 1 = /dev/mlanai1 Second Myrinet board
789 ...
791 This device is used for status query, board control
792 and "user level packet I/O." This board is also
793 accessible as a standard networking "eth" device.
795 38 block OBSOLETE (was Linux/AP+)
797 39 char ML-16P experimental I/O board
798 0 = /dev/ml16pa-a0 First card, first analog channel
799 1 = /dev/ml16pa-a1 First card, second analog channel
800 ...
801 15 = /dev/ml16pa-a15 First card, 16th analog channel
802 16 = /dev/ml16pa-d First card, digital lines
803 17 = /dev/ml16pa-c0 First card, first counter/timer
804 18 = /dev/ml16pa-c1 First card, second counter/timer
805 19 = /dev/ml16pa-c2 First card, third counter/timer
806 32 = /dev/ml16pb-a0 Second card, first analog channel
807 33 = /dev/ml16pb-a1 Second card, second analog channel
808 ...
809 47 = /dev/ml16pb-a15 Second card, 16th analog channel
810 48 = /dev/ml16pb-d Second card, digital lines
811 49 = /dev/ml16pb-c0 Second card, first counter/timer
812 50 = /dev/ml16pb-c1 Second card, second counter/timer
813 51 = /dev/ml16pb-c2 Second card, third counter/timer
814 ...
815 39 block
817 40 char
819 40 block
821 41 char Yet Another Micro Monitor
822 0 = /dev/yamm Yet Another Micro Monitor
824 41 block
826 42 char Demo/sample use
828 42 block Demo/sample use
830 This number is intended for use in sample code, as
831 well as a general "example" device number. It
832 should never be used for a device driver that is being
833 distributed; either obtain an official number or use
834 the local/experimental range. The sudden addition or
835 removal of a driver with this number should not cause
836 ill effects to the system (bugs excepted.)
838 IN PARTICULAR, ANY DISTRIBUTION WHICH CONTAINS A
839 DEVICE DRIVER USING MAJOR NUMBER 42 IS NONCOMPLIANT.
841 43 char isdn4linux virtual modem
842 0 = /dev/ttyI0 First virtual modem
843 ...
844 63 = /dev/ttyI63 64th virtual modem
846 43 block Network block devices
847 0 = /dev/nb0 First network block device
848 1 = /dev/nb1 Second network block device
849 ...
851 Network Block Device is somehow similar to loopback
852 devices: If you read from it, it sends packet across
853 network asking server for data. If you write to it, it
854 sends packet telling server to write. It could be used
855 to mounting filesystems over the net, swapping over
856 the net, implementing block device in userland etc.
858 44 char isdn4linux virtual modem - alternate devices
859 0 = /dev/cui0 Callout device for ttyI0
860 ...
861 63 = /dev/cui63 Callout device for ttyI63
863 44 block Flash Translation Layer (FTL) filesystems
864 0 = /dev/ftla FTL on first Memory Technology Device
865 16 = /dev/ftlb FTL on second Memory Technology Device
866 32 = /dev/ftlc FTL on third Memory Technology Device
867 ...
868 240 = /dev/ftlp FTL on 16th Memory Technology Device
870 Partitions are handled in the same way as for IDE
871 disks (see major number 3) except that the partition
872 limit is 15 rather than 63 per disk (same as SCSI.)
874 45 char isdn4linux ISDN BRI driver
875 0 = /dev/isdn0 First virtual B channel raw data
876 ...
877 63 = /dev/isdn63 64th virtual B channel raw data
878 64 = /dev/isdnctrl0 First channel control/debug
879 ...
880 127 = /dev/isdnctrl63 64th channel control/debug
882 128 = /dev/ippp0 First SyncPPP device
883 ...
884 191 = /dev/ippp63 64th SyncPPP device
886 255 = /dev/isdninfo ISDN monitor interface
888 45 block Parallel port IDE disk devices
889 0 = /dev/pda First parallel port IDE disk
890 16 = /dev/pdb Second parallel port IDE disk
891 32 = /dev/pdc Third parallel port IDE disk
892 48 = /dev/pdd Fourth parallel port IDE disk
894 Partitions are handled in the same way as for IDE
895 disks (see major number 3) except that the partition
896 limit is 15 rather than 63 per disk.
898 46 char Comtrol Rocketport serial card
899 0 = /dev/ttyR0 First Rocketport port
900 1 = /dev/ttyR1 Second Rocketport port
901 ...
902 46 block Parallel port ATAPI CD-ROM devices
903 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
904 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
905 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
906 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
908 47 char Comtrol Rocketport serial card - alternate devices
909 0 = /dev/cur0 Callout device for ttyR0
910 1 = /dev/cur1 Callout device for ttyR1
911 ...
912 47 block Parallel port ATAPI disk devices
913 0 = /dev/pf0 First parallel port ATAPI disk
914 1 = /dev/pf1 Second parallel port ATAPI disk
915 2 = /dev/pf2 Third parallel port ATAPI disk
916 3 = /dev/pf3 Fourth parallel port ATAPI disk
918 This driver is intended for floppy disks and similar
919 devices and hence does not support partitioning.
921 48 char SDL RISCom serial card
922 0 = /dev/ttyL0 First RISCom port
923 1 = /dev/ttyL1 Second RISCom port
924 ...
925 48 block Mylex DAC960 PCI RAID controller; first controller
926 0 = /dev/rd/c0d0 First disk, whole disk
927 8 = /dev/rd/c0d1 Second disk, whole disk
928 ...
929 248 = /dev/rd/c0d31 32nd disk, whole disk
931 For partitions add:
932 0 = /dev/rd/c?d? Whole disk
933 1 = /dev/rd/c?d?p1 First partition
934 ...
935 7 = /dev/rd/c?d?p7 Seventh partition
937 49 char SDL RISCom serial card - alternate devices
938 0 = /dev/cul0 Callout device for ttyL0
939 1 = /dev/cul1 Callout device for ttyL1
940 ...
941 49 block Mylex DAC960 PCI RAID controller; second controller
942 0 = /dev/rd/c1d0 First disk, whole disk
943 8 = /dev/rd/c1d1 Second disk, whole disk
944 ...
945 248 = /dev/rd/c1d31 32nd disk, whole disk
947 Partitions are handled as for major 48.
949 50 char Reserved for GLINT
951 50 block Mylex DAC960 PCI RAID controller; third controller
952 0 = /dev/rd/c2d0 First disk, whole disk
953 8 = /dev/rd/c2d1 Second disk, whole disk
954 ...
955 248 = /dev/rd/c2d31 32nd disk, whole disk
957 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
958 0 = /dev/bc0 First Baycom radio modem
959 1 = /dev/bc1 Second Baycom radio modem
960 ...
961 51 block Mylex DAC960 PCI RAID controller; fourth controller
962 0 = /dev/rd/c3d0 First disk, whole disk
963 8 = /dev/rd/c3d1 Second disk, whole disk
964 ...
965 248 = /dev/rd/c3d31 32nd disk, whole disk
967 Partitions are handled as for major 48.
969 52 char Spellcaster DataComm/BRI ISDN card
970 0 = /dev/dcbri0 First DataComm card
971 1 = /dev/dcbri1 Second DataComm card
972 2 = /dev/dcbri2 Third DataComm card
973 3 = /dev/dcbri3 Fourth DataComm card
975 52 block Mylex DAC960 PCI RAID controller; fifth controller
976 0 = /dev/rd/c4d0 First disk, whole disk
977 8 = /dev/rd/c4d1 Second disk, whole disk
978 ...
979 248 = /dev/rd/c4d31 32nd disk, whole disk
981 Partitions are handled as for major 48.
983 53 char BDM interface for remote debugging MC683xx microcontrollers
984 0 = /dev/pd_bdm0 PD BDM interface on lp0
985 1 = /dev/pd_bdm1 PD BDM interface on lp1
986 2 = /dev/pd_bdm2 PD BDM interface on lp2
987 4 = /dev/icd_bdm0 ICD BDM interface on lp0
988 5 = /dev/icd_bdm1 ICD BDM interface on lp1
989 6 = /dev/icd_bdm2 ICD BDM interface on lp2
991 This device is used for the interfacing to the MC683xx
992 microcontrollers via Background Debug Mode by use of a
993 Parallel Port interface. PD is the Motorola Public
994 Domain Interface and ICD is the commercial interface
995 by P&E.
997 53 block Mylex DAC960 PCI RAID controller; sixth controller
998 0 = /dev/rd/c5d0 First disk, whole disk
999 8 = /dev/rd/c5d1 Second disk, whole disk
1000 ...
1001 248 = /dev/rd/c5d31 32nd disk, whole disk
1003 Partitions are handled as for major 48.
1005 54 char Electrocardiognosis Holter serial card
1006 0 = /dev/holter0 First Holter port
1007 1 = /dev/holter1 Second Holter port
1008 2 = /dev/holter2 Third Holter port
1010 A custom serial card used by Electrocardiognosis SRL
1011 <mseritan@ottonel.pub.ro> to transfer data from Holter
1012 24-hour heart monitoring equipment.
1014 54 block Mylex DAC960 PCI RAID controller; seventh controller
1015 0 = /dev/rd/c6d0 First disk, whole disk
1016 8 = /dev/rd/c6d1 Second disk, whole disk
1017 ...
1018 248 = /dev/rd/c6d31 32nd disk, whole disk
1020 Partitions are handled as for major 48.
1022 55 char DSP56001 digital signal processor
1023 0 = /dev/dsp56k First DSP56001
1025 55 block Mylex DAC960 PCI RAID controller; eighth controller
1026 0 = /dev/rd/c7d0 First disk, whole disk
1027 8 = /dev/rd/c7d1 Second disk, whole disk
1028 ...
1029 248 = /dev/rd/c7d31 32nd disk, whole disk
1031 Partitions are handled as for major 48.
1033 56 char Apple Desktop Bus
1034 0 = /dev/adb ADB bus control
1036 Additional devices will be added to this number, all
1037 starting with /dev/adb.
1039 56 block Fifth IDE hard disk/CD-ROM interface
1040 0 = /dev/hdi Master: whole disk (or CD-ROM)
1041 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1043 Partitions are handled the same way as for the first
1044 interface (see major number 3).
1046 57 char Hayes ESP serial card
1047 0 = /dev/ttyP0 First ESP port
1048 1 = /dev/ttyP1 Second ESP port
1049 ...
1051 57 block Sixth IDE hard disk/CD-ROM interface
1052 0 = /dev/hdk Master: whole disk (or CD-ROM)
1053 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1055 Partitions are handled the same way as for the first
1056 interface (see major number 3).
1058 58 char Hayes ESP serial card - alternate devices
1059 0 = /dev/cup0 Callout device for ttyP0
1060 1 = /dev/cup1 Callout device for ttyP1
1061 ...
1063 58 block Reserved for logical volume manager
1065 59 char sf firewall package
1066 0 = /dev/firewall Communication with sf kernel module
1068 59 block Generic PDA filesystem device
1069 0 = /dev/pda0 First PDA device
1070 1 = /dev/pda1 Second PDA device
1071 ...
1073 The pda devices are used to mount filesystems on
1074 remote pda's (basically slow handheld machines with
1075 proprietary OS's and limited memory and storage
1076 running small fs translation drivers) through serial /
1077 IRDA / parallel links.
1079 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1081 60-63 char LOCAL/EXPERIMENTAL USE
1083 60-63 block LOCAL/EXPERIMENTAL USE
1084 Allocated for local/experimental use. For devices not
1085 assigned official numbers, these ranges should be
1086 used in order to avoid conflicting with future assignments.
1088 64 char ENskip kernel encryption package
1089 0 = /dev/enskip Communication with ENskip kernel module
1091 64 block Scramdisk/DriveCrypt encrypted devices
1092 0 = /dev/scramdisk/master Master node for ioctls
1093 1 = /dev/scramdisk/1 First encrypted device
1094 2 = /dev/scramdisk/2 Second encrypted device
1095 ...
1096 255 = /dev/scramdisk/255 255th encrypted device
1098 The filename of the encrypted container and the passwords
1099 are sent via ioctls (using the sdmount tool) to the master
1100 node which then activates them via one of the
1101 /dev/scramdisk/x nodes for loop mounting (all handled
1102 through the sdmount tool).
1104 Requested by: andy@scramdisklinux.org
1106 65 char Sundance "plink" Transputer boards (obsolete, unused)
1107 0 = /dev/plink0 First plink device
1108 1 = /dev/plink1 Second plink device
1109 2 = /dev/plink2 Third plink device
1110 3 = /dev/plink3 Fourth plink device
1111 64 = /dev/rplink0 First plink device, raw
1112 65 = /dev/rplink1 Second plink device, raw
1113 66 = /dev/rplink2 Third plink device, raw
1114 67 = /dev/rplink3 Fourth plink device, raw
1115 128 = /dev/plink0d First plink device, debug
1116 129 = /dev/plink1d Second plink device, debug
1117 130 = /dev/plink2d Third plink device, debug
1118 131 = /dev/plink3d Fourth plink device, debug
1119 192 = /dev/rplink0d First plink device, raw, debug
1120 193 = /dev/rplink1d Second plink device, raw, debug
1121 194 = /dev/rplink2d Third plink device, raw, debug
1122 195 = /dev/rplink3d Fourth plink device, raw, debug
1124 This is a commercial driver; contact James Howes
1125 <jth@prosig.demon.co.uk> for information.
1127 65 block SCSI disk devices (16-31)
1128 0 = /dev/sdq 17th SCSI disk whole disk
1129 16 = /dev/sdr 18th SCSI disk whole disk
1130 32 = /dev/sds 19th SCSI disk whole disk
1131 ...
1132 240 = /dev/sdaf 32nd SCSI disk whole disk
1134 Partitions are handled in the same way as for IDE
1135 disks (see major number 3) except that the limit on
1136 partitions is 15.
1138 66 char YARC PowerPC PCI coprocessor card
1139 0 = /dev/yppcpci0 First YARC card
1140 1 = /dev/yppcpci1 Second YARC card
1141 ...
1143 66 block SCSI disk devices (32-47)
1144 0 = /dev/sdag 33th SCSI disk whole disk
1145 16 = /dev/sdah 34th SCSI disk whole disk
1146 32 = /dev/sdai 35th SCSI disk whole disk
1147 ...
1148 240 = /dev/sdav 48nd SCSI disk whole disk
1150 Partitions are handled in the same way as for IDE
1151 disks (see major number 3) except that the limit on
1152 partitions is 15.
1154 67 char Coda network file system
1155 0 = /dev/cfs0 Coda cache manager
1157 See http://www.coda.cs.cmu.edu for information about Coda.
1159 67 block SCSI disk devices (48-63)
1160 0 = /dev/sdaw 49th SCSI disk whole disk
1161 16 = /dev/sdax 50th SCSI disk whole disk
1162 32 = /dev/sday 51st SCSI disk whole disk
1163 ...
1164 240 = /dev/sdbl 64th SCSI disk whole disk
1166 Partitions are handled in the same way as for IDE
1167 disks (see major number 3) except that the limit on
1168 partitions is 15.
1170 68 char CAPI 2.0 interface
1171 0 = /dev/capi20 Control device
1172 1 = /dev/capi20.00 First CAPI 2.0 application
1173 2 = /dev/capi20.01 Second CAPI 2.0 application
1174 ...
1175 20 = /dev/capi20.19 19th CAPI 2.0 application
1177 ISDN CAPI 2.0 driver for use with CAPI 2.0
1178 applications; currently supports the AVM B1 card.
1180 68 block SCSI disk devices (64-79)
1181 0 = /dev/sdbm 65th SCSI disk whole disk
1182 16 = /dev/sdbn 66th SCSI disk whole disk
1183 32 = /dev/sdbo 67th SCSI disk whole disk
1184 ...
1185 240 = /dev/sdcb 80th SCSI disk whole disk
1187 Partitions are handled in the same way as for IDE
1188 disks (see major number 3) except that the limit on
1189 partitions is 15.
1191 69 char MA16 numeric accelerator card
1192 0 = /dev/ma16 Board memory access
1194 69 block SCSI disk devices (80-95)
1195 0 = /dev/sdcc 81st SCSI disk whole disk
1196 16 = /dev/sdcd 82nd SCSI disk whole disk
1197 32 = /dev/sdce 83th SCSI disk whole disk
1198 ...
1199 240 = /dev/sdcr 96th SCSI disk whole disk
1201 Partitions are handled in the same way as for IDE
1202 disks (see major number 3) except that the limit on
1203 partitions is 15.
1205 70 char SpellCaster Protocol Services Interface
1206 0 = /dev/apscfg Configuration interface
1207 1 = /dev/apsauth Authentication interface
1208 2 = /dev/apslog Logging interface
1209 3 = /dev/apsdbg Debugging interface
1210 64 = /dev/apsisdn ISDN command interface
1211 65 = /dev/apsasync Async command interface
1212 128 = /dev/apsmon Monitor interface
1214 70 block SCSI disk devices (96-111)
1215 0 = /dev/sdcs 97th SCSI disk whole disk
1216 16 = /dev/sdct 98th SCSI disk whole disk
1217 32 = /dev/sdcu 99th SCSI disk whole disk
1218 ...
1219 240 = /dev/sddh 112nd SCSI disk whole disk
1221 Partitions are handled in the same way as for IDE
1222 disks (see major number 3) except that the limit on
1223 partitions is 15.
1225 71 char Computone IntelliPort II serial card
1226 0 = /dev/ttyF0 IntelliPort II board 0, port 0
1227 1 = /dev/ttyF1 IntelliPort II board 0, port 1
1228 ...
1229 63 = /dev/ttyF63 IntelliPort II board 0, port 63
1230 64 = /dev/ttyF64 IntelliPort II board 1, port 0
1231 65 = /dev/ttyF65 IntelliPort II board 1, port 1
1232 ...
1233 127 = /dev/ttyF127 IntelliPort II board 1, port 63
1234 128 = /dev/ttyF128 IntelliPort II board 2, port 0
1235 129 = /dev/ttyF129 IntelliPort II board 2, port 1
1236 ...
1237 191 = /dev/ttyF191 IntelliPort II board 2, port 63
1238 192 = /dev/ttyF192 IntelliPort II board 3, port 0
1239 193 = /dev/ttyF193 IntelliPort II board 3, port 1
1240 ...
1241 255 = /dev/ttyF255 IntelliPort II board 3, port 63
1243 71 block SCSI disk devices (112-127)
1244 0 = /dev/sddi 113th SCSI disk whole disk
1245 16 = /dev/sddj 114th SCSI disk whole disk
1246 32 = /dev/sddk 115th SCSI disk whole disk
1247 ...
1248 240 = /dev/sddx 128th SCSI disk whole disk
1250 Partitions are handled in the same way as for IDE
1251 disks (see major number 3) except that the limit on
1252 partitions is 15.
1254 72 char Computone IntelliPort II serial card - alternate devices
1255 0 = /dev/cuf0 Callout device for ttyF0
1256 1 = /dev/cuf1 Callout device for ttyF1
1257 ...
1258 63 = /dev/cuf63 Callout device for ttyF63
1259 64 = /dev/cuf64 Callout device for ttyF64
1260 65 = /dev/cuf65 Callout device for ttyF65
1261 ...
1262 127 = /dev/cuf127 Callout device for ttyF127
1263 128 = /dev/cuf128 Callout device for ttyF128
1264 129 = /dev/cuf129 Callout device for ttyF129
1265 ...
1266 191 = /dev/cuf191 Callout device for ttyF191
1267 192 = /dev/cuf192 Callout device for ttyF192
1268 193 = /dev/cuf193 Callout device for ttyF193
1269 ...
1270 255 = /dev/cuf255 Callout device for ttyF255
1272 72 block Compaq Intelligent Drive Array, first controller
1273 0 = /dev/ida/c0d0 First logical drive whole disk
1274 16 = /dev/ida/c0d1 Second logical drive whole disk
1275 ...
1276 240 = /dev/ida/c0d15 16th logical drive whole disk
1278 Partitions are handled the same way as for Mylex
1279 DAC960 (see major number 48) except that the limit on
1280 partitions is 15.
1282 73 char Computone IntelliPort II serial card - control devices
1283 0 = /dev/ip2ipl0 Loadware device for board 0
1284 1 = /dev/ip2stat0 Status device for board 0
1285 4 = /dev/ip2ipl1 Loadware device for board 1
1286 5 = /dev/ip2stat1 Status device for board 1
1287 8 = /dev/ip2ipl2 Loadware device for board 2
1288 9 = /dev/ip2stat2 Status device for board 2
1289 12 = /dev/ip2ipl3 Loadware device for board 3
1290 13 = /dev/ip2stat3 Status device for board 3
1292 73 block Compaq Intelligent Drive Array, second controller
1293 0 = /dev/ida/c1d0 First logical drive whole disk
1294 16 = /dev/ida/c1d1 Second logical drive whole disk
1295 ...
1296 240 = /dev/ida/c1d15 16th logical drive whole disk
1298 Partitions are handled the same way as for Mylex
1299 DAC960 (see major number 48) except that the limit on
1300 partitions is 15.
1302 74 char SCI bridge
1303 0 = /dev/SCI/0 SCI device 0
1304 1 = /dev/SCI/1 SCI device 1
1305 ...
1307 Currently for Dolphin Interconnect Solutions' PCI-SCI
1308 bridge.
1310 74 block Compaq Intelligent Drive Array, third controller
1311 0 = /dev/ida/c2d0 First logical drive whole disk
1312 16 = /dev/ida/c2d1 Second logical drive whole disk
1313 ...
1314 240 = /dev/ida/c2d15 16th logical drive whole disk
1316 Partitions are handled the same way as for Mylex
1317 DAC960 (see major number 48) except that the limit on
1318 partitions is 15.
1320 75 char Specialix IO8+ serial card
1321 0 = /dev/ttyW0 First IO8+ port, first card
1322 1 = /dev/ttyW1 Second IO8+ port, first card
1323 ...
1324 8 = /dev/ttyW8 First IO8+ port, second card
1325 ...
1327 75 block Compaq Intelligent Drive Array, fourth controller
1328 0 = /dev/ida/c3d0 First logical drive whole disk
1329 16 = /dev/ida/c3d1 Second logical drive whole disk
1330 ...
1331 240 = /dev/ida/c3d15 16th logical drive whole disk
1333 Partitions are handled the same way as for Mylex
1334 DAC960 (see major number 48) except that the limit on
1335 partitions is 15.
1337 76 char Specialix IO8+ serial card - alternate devices
1338 0 = /dev/cuw0 Callout device for ttyW0
1339 1 = /dev/cuw1 Callout device for ttyW1
1340 ...
1341 8 = /dev/cuw8 Callout device for ttyW8
1342 ...
1344 76 block Compaq Intelligent Drive Array, fifth controller
1345 0 = /dev/ida/c4d0 First logical drive whole disk
1346 16 = /dev/ida/c4d1 Second logical drive whole disk
1347 ...
1348 240 = /dev/ida/c4d15 16th logical drive whole disk
1350 Partitions are handled the same way as for Mylex
1351 DAC960 (see major number 48) except that the limit on
1352 partitions is 15.
1355 77 char ComScire Quantum Noise Generator
1356 0 = /dev/qng ComScire Quantum Noise Generator
1358 77 block Compaq Intelligent Drive Array, sixth controller
1359 0 = /dev/ida/c5d0 First logical drive whole disk
1360 16 = /dev/ida/c5d1 Second logical drive whole disk
1361 ...
1362 240 = /dev/ida/c5d15 16th logical drive whole disk
1364 Partitions are handled the same way as for Mylex
1365 DAC960 (see major number 48) except that the limit on
1366 partitions is 15.
1368 78 char PAM Software's multimodem boards
1369 0 = /dev/ttyM0 First PAM modem
1370 1 = /dev/ttyM1 Second PAM modem
1371 ...
1373 78 block Compaq Intelligent Drive Array, seventh controller
1374 0 = /dev/ida/c6d0 First logical drive whole disk
1375 16 = /dev/ida/c6d1 Second logical drive whole disk
1376 ...
1377 240 = /dev/ida/c6d15 16th logical drive whole disk
1379 Partitions are handled the same way as for Mylex
1380 DAC960 (see major number 48) except that the limit on
1381 partitions is 15.
1383 79 char PAM Software's multimodem boards - alternate devices
1384 0 = /dev/cum0 Callout device for ttyM0
1385 1 = /dev/cum1 Callout device for ttyM1
1386 ...
1388 79 block Compaq Intelligent Drive Array, eighth controller
1389 0 = /dev/ida/c7d0 First logical drive whole disk
1390 16 = /dev/ida/c7d1 Second logical drive whole disk
1391 ...
1392 240 = /dev/ida/c715 16th logical drive whole disk
1394 Partitions are handled the same way as for Mylex
1395 DAC960 (see major number 48) except that the limit on
1396 partitions is 15.
1398 80 char Photometrics AT200 CCD camera
1399 0 = /dev/at200 Photometrics AT200 CCD camera
1401 80 block I2O hard disk
1402 0 = /dev/i2o/hda First I2O hard disk, whole disk
1403 16 = /dev/i2o/hdb Second I2O hard disk, whole disk
1404 ...
1405 240 = /dev/i2o/hdp 16th I2O hard disk, whole disk
1407 Partitions are handled in the same way as for IDE
1408 disks (see major number 3) except that the limit on
1409 partitions is 15.
1411 81 char video4linux
1412 0 = /dev/video0 Video capture/overlay device
1413 ...
1414 63 = /dev/video63 Video capture/overlay device
1415 64 = /dev/radio0 Radio device
1416 ...
1417 127 = /dev/radio63 Radio device
1418 128 = /dev/swradio0 Software Defined Radio device
1419 ...
1420 191 = /dev/swradio63 Software Defined Radio device
1421 224 = /dev/vbi0 Vertical blank interrupt
1422 ...
1423 255 = /dev/vbi31 Vertical blank interrupt
1425 Minor numbers are allocated dynamically unless
1426 CONFIG_VIDEO_FIXED_MINOR_RANGES (default n)
1427 configuration option is set.
1429 81 block I2O hard disk
1430 0 = /dev/i2o/hdq 17th I2O hard disk, whole disk
1431 16 = /dev/i2o/hdr 18th I2O hard disk, whole disk
1432 ...
1433 240 = /dev/i2o/hdaf 32nd I2O hard disk, whole disk
1435 Partitions are handled in the same way as for IDE
1436 disks (see major number 3) except that the limit on
1437 partitions is 15.
1439 82 char WiNRADiO communications receiver card
1440 0 = /dev/winradio0 First WiNRADiO card
1441 1 = /dev/winradio1 Second WiNRADiO card
1442 ...
1444 The driver and documentation may be obtained from
1445 http://www.winradio.com/
1447 82 block I2O hard disk
1448 0 = /dev/i2o/hdag 33rd I2O hard disk, whole disk
1449 16 = /dev/i2o/hdah 34th I2O hard disk, whole disk
1450 ...
1451 240 = /dev/i2o/hdav 48th I2O hard disk, whole disk
1453 Partitions are handled in the same way as for IDE
1454 disks (see major number 3) except that the limit on
1455 partitions is 15.
1457 83 char Matrox mga_vid video driver
1458 0 = /dev/mga_vid0 1st video card
1459 1 = /dev/mga_vid1 2nd video card
1460 2 = /dev/mga_vid2 3rd video card
1461 ...
1462 15 = /dev/mga_vid15 16th video card
1464 83 block I2O hard disk
1465 0 = /dev/i2o/hdaw 49th I2O hard disk, whole disk
1466 16 = /dev/i2o/hdax 50th I2O hard disk, whole disk
1467 ...
1468 240 = /dev/i2o/hdbl 64th I2O hard disk, whole disk
1470 Partitions are handled in the same way as for IDE
1471 disks (see major number 3) except that the limit on
1472 partitions is 15.
1474 84 char Ikon 1011[57] Versatec Greensheet Interface
1475 0 = /dev/ihcp0 First Greensheet port
1476 1 = /dev/ihcp1 Second Greensheet port
1478 84 block I2O hard disk
1479 0 = /dev/i2o/hdbm 65th I2O hard disk, whole disk
1480 16 = /dev/i2o/hdbn 66th I2O hard disk, whole disk
1481 ...
1482 240 = /dev/i2o/hdcb 80th I2O hard disk, whole disk
1484 Partitions are handled in the same way as for IDE
1485 disks (see major number 3) except that the limit on
1486 partitions is 15.
1488 85 char Linux/SGI shared memory input queue
1489 0 = /dev/shmiq Master shared input queue
1490 1 = /dev/qcntl0 First device pushed
1491 2 = /dev/qcntl1 Second device pushed
1492 ...
1494 85 block I2O hard disk
1495 0 = /dev/i2o/hdcc 81st I2O hard disk, whole disk
1496 16 = /dev/i2o/hdcd 82nd I2O hard disk, whole disk
1497 ...
1498 240 = /dev/i2o/hdcr 96th I2O hard disk, whole disk
1500 Partitions are handled in the same way as for IDE
1501 disks (see major number 3) except that the limit on
1502 partitions is 15.
1504 86 char SCSI media changer
1505 0 = /dev/sch0 First SCSI media changer
1506 1 = /dev/sch1 Second SCSI media changer
1507 ...
1509 86 block I2O hard disk
1510 0 = /dev/i2o/hdcs 97th I2O hard disk, whole disk
1511 16 = /dev/i2o/hdct 98th I2O hard disk, whole disk
1512 ...
1513 240 = /dev/i2o/hddh 112th I2O hard disk, whole disk
1515 Partitions are handled in the same way as for IDE
1516 disks (see major number 3) except that the limit on
1517 partitions is 15.
1519 87 char Sony Control-A1 stereo control bus
1520 0 = /dev/controla0 First device on chain
1521 1 = /dev/controla1 Second device on chain
1522 ...
1524 87 block I2O hard disk
1525 0 = /dev/i2o/hddi 113rd I2O hard disk, whole disk
1526 16 = /dev/i2o/hddj 114th I2O hard disk, whole disk
1527 ...
1528 240 = /dev/i2o/hddx 128th I2O hard disk, whole disk
1530 Partitions are handled in the same way as for IDE
1531 disks (see major number 3) except that the limit on
1532 partitions is 15.
1534 88 char COMX synchronous serial card
1535 0 = /dev/comx0 COMX channel 0
1536 1 = /dev/comx1 COMX channel 1
1537 ...
1539 88 block Seventh IDE hard disk/CD-ROM interface
1540 0 = /dev/hdm Master: whole disk (or CD-ROM)
1541 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1543 Partitions are handled the same way as for the first
1544 interface (see major number 3).
1546 89 char I2C bus interface
1547 0 = /dev/i2c-0 First I2C adapter
1548 1 = /dev/i2c-1 Second I2C adapter
1549 ...
1551 89 block Eighth IDE hard disk/CD-ROM interface
1552 0 = /dev/hdo Master: whole disk (or CD-ROM)
1553 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1555 Partitions are handled the same way as for the first
1556 interface (see major number 3).
1558 90 char Memory Technology Device (RAM, ROM, Flash)
1559 0 = /dev/mtd0 First MTD (rw)
1560 1 = /dev/mtdr0 First MTD (ro)
1561 ...
1562 30 = /dev/mtd15 16th MTD (rw)
1563 31 = /dev/mtdr15 16th MTD (ro)
1565 90 block Ninth IDE hard disk/CD-ROM interface
1566 0 = /dev/hdq Master: whole disk (or CD-ROM)
1567 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1569 Partitions are handled the same way as for the first
1570 interface (see major number 3).
1572 91 char CAN-Bus devices
1573 0 = /dev/can0 First CAN-Bus controller
1574 1 = /dev/can1 Second CAN-Bus controller
1575 ...
1577 91 block Tenth IDE hard disk/CD-ROM interface
1578 0 = /dev/hds Master: whole disk (or CD-ROM)
1579 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1581 Partitions are handled the same way as for the first
1582 interface (see major number 3).
1584 92 char Reserved for ith Kommunikationstechnik MIC ISDN card
1586 92 block PPDD encrypted disk driver
1587 0 = /dev/ppdd0 First encrypted disk
1588 1 = /dev/ppdd1 Second encrypted disk
1589 ...
1591 Partitions are handled in the same way as for IDE
1592 disks (see major number 3) except that the limit on
1593 partitions is 15.
1595 93 char
1597 93 block NAND Flash Translation Layer filesystem
1598 0 = /dev/nftla First NFTL layer
1599 16 = /dev/nftlb Second NFTL layer
1600 ...
1601 240 = /dev/nftlp 16th NTFL layer
1603 94 char
1605 94 block IBM S/390 DASD block storage
1606 0 = /dev/dasda First DASD device, major
1607 1 = /dev/dasda1 First DASD device, block 1
1608 2 = /dev/dasda2 First DASD device, block 2
1609 3 = /dev/dasda3 First DASD device, block 3
1610 4 = /dev/dasdb Second DASD device, major
1611 5 = /dev/dasdb1 Second DASD device, block 1
1612 6 = /dev/dasdb2 Second DASD device, block 2
1613 7 = /dev/dasdb3 Second DASD device, block 3
1614 ...
1616 95 char IP filter
1617 0 = /dev/ipl Filter control device/log file
1618 1 = /dev/ipnat NAT control device/log file
1619 2 = /dev/ipstate State information log file
1620 3 = /dev/ipauth Authentication control device/log file
1621 ...
1623 96 char Parallel port ATAPI tape devices
1624 0 = /dev/pt0 First parallel port ATAPI tape
1625 1 = /dev/pt1 Second parallel port ATAPI tape
1626 ...
1627 128 = /dev/npt0 First p.p. ATAPI tape, no rewind
1628 129 = /dev/npt1 Second p.p. ATAPI tape, no rewind
1629 ...
1631 96 block Inverse NAND Flash Translation Layer
1632 0 = /dev/inftla First INFTL layer
1633 16 = /dev/inftlb Second INFTL layer
1634 ...
1635 240 = /dev/inftlp 16th INTFL layer
1637 97 char Parallel port generic ATAPI interface
1638 0 = /dev/pg0 First parallel port ATAPI device
1639 1 = /dev/pg1 Second parallel port ATAPI device
1640 2 = /dev/pg2 Third parallel port ATAPI device
1641 3 = /dev/pg3 Fourth parallel port ATAPI device
1643 These devices support the same API as the generic SCSI
1644 devices.
1646 98 char Control and Measurement Device (comedi)
1647 0 = /dev/comedi0 First comedi device
1648 1 = /dev/comedi1 Second comedi device
1649 ...
1651 See http://stm.lbl.gov/comedi.
1653 98 block User-mode virtual block device
1654 0 = /dev/ubda First user-mode block device
1655 16 = /dev/udbb Second user-mode block device
1656 ...
1658 Partitions are handled in the same way as for IDE
1659 disks (see major number 3) except that the limit on
1660 partitions is 15.
1662 This device is used by the user-mode virtual kernel port.
1664 99 char Raw parallel ports
1665 0 = /dev/parport0 First parallel port
1666 1 = /dev/parport1 Second parallel port
1667 ...
1669 99 block JavaStation flash disk
1670 0 = /dev/jsfd JavaStation flash disk
1672 100 char Telephony for Linux
1673 0 = /dev/phone0 First telephony device
1674 1 = /dev/phone1 Second telephony device
1675 ...
1677 101 char Motorola DSP 56xxx board
1678 0 = /dev/mdspstat Status information
1679 1 = /dev/mdsp1 First DSP board I/O controls
1680 ...
1681 16 = /dev/mdsp16 16th DSP board I/O controls
1683 101 block AMI HyperDisk RAID controller
1684 0 = /dev/amiraid/ar0 First array whole disk
1685 16 = /dev/amiraid/ar1 Second array whole disk
1686 ...
1687 240 = /dev/amiraid/ar15 16th array whole disk
1689 For each device, partitions are added as:
1690 0 = /dev/amiraid/ar? Whole disk
1691 1 = /dev/amiraid/ar?p1 First partition
1692 2 = /dev/amiraid/ar?p2 Second partition
1693 ...
1694 15 = /dev/amiraid/ar?p15 15th partition
1696 102 char
1698 102 block Compressed block device
1699 0 = /dev/cbd/a First compressed block device, whole device
1700 16 = /dev/cbd/b Second compressed block device, whole device
1701 ...
1702 240 = /dev/cbd/p 16th compressed block device, whole device
1704 Partitions are handled in the same way as for IDE
1705 disks (see major number 3) except that the limit on
1706 partitions is 15.
1708 103 char Arla network file system
1709 0 = /dev/nnpfs0 First NNPFS device
1710 1 = /dev/nnpfs1 Second NNPFS device
1712 Arla is a free clone of the Andrew File System, AFS.
1713 The NNPFS device gives user mode filesystem
1714 implementations a kernel presence for caching and easy
1715 mounting. For more information about the project,
1716 write to <arla-drinkers@stacken.kth.se> or see
1717 http://www.stacken.kth.se/project/arla/
1719 103 block Audit device
1720 0 = /dev/audit Audit device
1722 104 char Flash BIOS support
1724 104 block Compaq Next Generation Drive Array, first controller
1725 0 = /dev/cciss/c0d0 First logical drive, whole disk
1726 16 = /dev/cciss/c0d1 Second logical drive, whole disk
1727 ...
1728 240 = /dev/cciss/c0d15 16th logical drive, whole disk
1730 Partitions are handled the same way as for Mylex
1731 DAC960 (see major number 48) except that the limit on
1732 partitions is 15.
1734 105 char Comtrol VS-1000 serial controller
1735 0 = /dev/ttyV0 First VS-1000 port
1736 1 = /dev/ttyV1 Second VS-1000 port
1737 ...
1739 105 block Compaq Next Generation Drive Array, second controller
1740 0 = /dev/cciss/c1d0 First logical drive, whole disk
1741 16 = /dev/cciss/c1d1 Second logical drive, whole disk
1742 ...
1743 240 = /dev/cciss/c1d15 16th logical drive, whole disk
1745 Partitions are handled the same way as for Mylex
1746 DAC960 (see major number 48) except that the limit on
1747 partitions is 15.
1749 106 char Comtrol VS-1000 serial controller - alternate devices
1750 0 = /dev/cuv0 First VS-1000 port
1751 1 = /dev/cuv1 Second VS-1000 port
1752 ...
1754 106 block Compaq Next Generation Drive Array, third controller
1755 0 = /dev/cciss/c2d0 First logical drive, whole disk
1756 16 = /dev/cciss/c2d1 Second logical drive, whole disk
1757 ...
1758 240 = /dev/cciss/c2d15 16th logical drive, whole disk
1760 Partitions are handled the same way as for Mylex
1761 DAC960 (see major number 48) except that the limit on
1762 partitions is 15.
1764 107 char 3Dfx Voodoo Graphics device
1765 0 = /dev/3dfx Primary 3Dfx graphics device
1767 107 block Compaq Next Generation Drive Array, fourth controller
1768 0 = /dev/cciss/c3d0 First logical drive, whole disk
1769 16 = /dev/cciss/c3d1 Second logical drive, whole disk
1770 ...
1771 240 = /dev/cciss/c3d15 16th logical drive, whole disk
1773 Partitions are handled the same way as for Mylex
1774 DAC960 (see major number 48) except that the limit on
1775 partitions is 15.
1777 108 char Device independent PPP interface
1778 0 = /dev/ppp Device independent PPP interface
1780 108 block Compaq Next Generation Drive Array, fifth controller
1781 0 = /dev/cciss/c4d0 First logical drive, whole disk
1782 16 = /dev/cciss/c4d1 Second logical drive, whole disk
1783 ...
1784 240 = /dev/cciss/c4d15 16th logical drive, whole disk
1786 Partitions are handled the same way as for Mylex
1787 DAC960 (see major number 48) except that the limit on
1788 partitions is 15.
1790 109 char Reserved for logical volume manager
1792 109 block Compaq Next Generation Drive Array, sixth controller
1793 0 = /dev/cciss/c5d0 First logical drive, whole disk
1794 16 = /dev/cciss/c5d1 Second logical drive, whole disk
1795 ...
1796 240 = /dev/cciss/c5d15 16th logical drive, whole disk
1798 Partitions are handled the same way as for Mylex
1799 DAC960 (see major number 48) except that the limit on
1800 partitions is 15.
1802 110 char miroMEDIA Surround board
1803 0 = /dev/srnd0 First miroMEDIA Surround board
1804 1 = /dev/srnd1 Second miroMEDIA Surround board
1805 ...
1807 110 block Compaq Next Generation Drive Array, seventh controller
1808 0 = /dev/cciss/c6d0 First logical drive, whole disk
1809 16 = /dev/cciss/c6d1 Second logical drive, whole disk
1810 ...
1811 240 = /dev/cciss/c6d15 16th logical drive, whole disk
1813 Partitions are handled the same way as for Mylex
1814 DAC960 (see major number 48) except that the limit on
1815 partitions is 15.
1817 111 char
1819 111 block Compaq Next Generation Drive Array, eighth controller
1820 0 = /dev/cciss/c7d0 First logical drive, whole disk
1821 16 = /dev/cciss/c7d1 Second logical drive, whole disk
1822 ...
1823 240 = /dev/cciss/c7d15 16th logical drive, whole disk
1825 Partitions are handled the same way as for Mylex
1826 DAC960 (see major number 48) except that the limit on
1827 partitions is 15.
1829 112 char ISI serial card
1830 0 = /dev/ttyM0 First ISI port
1831 1 = /dev/ttyM1 Second ISI port
1832 ...
1834 There is currently a device-naming conflict between
1835 these and PAM multimodems (major 78).
1837 112 block IBM iSeries virtual disk
1838 0 = /dev/iseries/vda First virtual disk, whole disk
1839 8 = /dev/iseries/vdb Second virtual disk, whole disk
1840 ...
1841 200 = /dev/iseries/vdz 26th virtual disk, whole disk
1842 208 = /dev/iseries/vdaa 27th virtual disk, whole disk
1843 ...
1844 248 = /dev/iseries/vdaf 32nd virtual disk, whole disk
1846 Partitions are handled in the same way as for IDE
1847 disks (see major number 3) except that the limit on
1848 partitions is 7.
1850 113 char ISI serial card - alternate devices
1851 0 = /dev/cum0 Callout device for ttyM0
1852 1 = /dev/cum1 Callout device for ttyM1
1853 ...
1855 113 block IBM iSeries virtual CD-ROM
1856 0 = /dev/iseries/vcda First virtual CD-ROM
1857 1 = /dev/iseries/vcdb Second virtual CD-ROM
1858 ...
1860 114 char Picture Elements ISE board
1861 0 = /dev/ise0 First ISE board
1862 1 = /dev/ise1 Second ISE board
1863 ...
1864 128 = /dev/isex0 Control node for first ISE board
1865 129 = /dev/isex1 Control node for second ISE board
1866 ...
1868 The ISE board is an embedded computer, optimized for
1869 image processing. The /dev/iseN nodes are the general
1870 I/O access to the board, the /dev/isex0 nodes command
1871 nodes used to control the board.
1873 114 block IDE BIOS powered software RAID interfaces such as the
1874 Promise Fastrak
1876 0 = /dev/ataraid/d0
1877 1 = /dev/ataraid/d0p1
1878 2 = /dev/ataraid/d0p2
1879 ...
1880 16 = /dev/ataraid/d1
1881 17 = /dev/ataraid/d1p1
1882 18 = /dev/ataraid/d1p2
1883 ...
1884 255 = /dev/ataraid/d15p15
1886 Partitions are handled in the same way as for IDE
1887 disks (see major number 3) except that the limit on
1888 partitions is 15.
1890 115 char TI link cable devices (115 was formerly the console driver speaker)
1891 0 = /dev/tipar0 Parallel cable on first parallel port
1892 ...
1893 7 = /dev/tipar7 Parallel cable on seventh parallel port
1895 8 = /dev/tiser0 Serial cable on first serial port
1896 ...
1897 15 = /dev/tiser7 Serial cable on seventh serial port
1899 16 = /dev/tiusb0 First USB cable
1900 ...
1901 47 = /dev/tiusb31 32nd USB cable
1903 115 block NetWare (NWFS) Devices (0-255)
1905 The NWFS (NetWare) devices are used to present a
1906 collection of NetWare Mirror Groups or NetWare
1907 Partitions as a logical storage segment for
1908 use in mounting NetWare volumes. A maximum of
1909 256 NetWare volumes can be supported in a single
1910 machine.
1912 http://cgfa.telepac.pt/ftp2/kernel.org/linux/kernel/people/jmerkey/nwfs/
1914 0 = /dev/nwfs/v0 First NetWare (NWFS) Logical Volume
1915 1 = /dev/nwfs/v1 Second NetWare (NWFS) Logical Volume
1916 2 = /dev/nwfs/v2 Third NetWare (NWFS) Logical Volume
1917 ...
1918 255 = /dev/nwfs/v255 Last NetWare (NWFS) Logical Volume
1920 116 char Advanced Linux Sound Driver (ALSA)
1922 116 block MicroMemory battery backed RAM adapter (NVRAM)
1923 Supports 16 boards, 15 partitions each.
1924 Requested by neilb at cse.unsw.edu.au.
1926 0 = /dev/umem/d0 Whole of first board
1927 1 = /dev/umem/d0p1 First partition of first board
1928 2 = /dev/umem/d0p2 Second partition of first board
1929 15 = /dev/umem/d0p15 15th partition of first board
1931 16 = /dev/umem/d1 Whole of second board
1932 17 = /dev/umem/d1p1 First partition of second board
1933 ...
1934 255= /dev/umem/d15p15 15th partition of 16th board.
1936 117 char COSA/SRP synchronous serial card
1937 0 = /dev/cosa0c0 1st board, 1st channel
1938 1 = /dev/cosa0c1 1st board, 2nd channel
1939 ...
1940 16 = /dev/cosa1c0 2nd board, 1st channel
1941 17 = /dev/cosa1c1 2nd board, 2nd channel
1942 ...
1944 117 block Enterprise Volume Management System (EVMS)
1946 The EVMS driver uses a layered, plug-in model to provide
1947 unparalleled flexibility and extensibility in managing
1948 storage. This allows for easy expansion or customization
1949 of various levels of volume management. Requested by
1950 Mark Peloquin (peloquin at us.ibm.com).
1952 Note: EVMS populates and manages all the devnodes in
1953 /dev/evms.
1955 http://sf.net/projects/evms
1957 0 = /dev/evms/block_device EVMS block device
1958 1 = /dev/evms/legacyname1 First EVMS legacy device
1959 2 = /dev/evms/legacyname2 Second EVMS legacy device
1960 ...
1961 Both ranges can grow (down or up) until they meet.
1962 ...
1963 254 = /dev/evms/EVMSname2 Second EVMS native device
1964 255 = /dev/evms/EVMSname1 First EVMS native device
1966 Note: legacyname(s) are derived from the normal legacy
1967 device names. For example, /dev/hda5 would become
1968 /dev/evms/hda5.
1970 118 char IBM Cryptographic Accelerator
1971 0 = /dev/ica Virtual interface to all IBM Crypto Accelerators
1972 1 = /dev/ica0 IBMCA Device 0
1973 2 = /dev/ica1 IBMCA Device 1
1974 ...
1976 119 char VMware virtual network control
1977 0 = /dev/vnet0 1st virtual network
1978 1 = /dev/vnet1 2nd virtual network
1979 ...
1981 120-127 char LOCAL/EXPERIMENTAL USE
1983 120-127 block LOCAL/EXPERIMENTAL USE
1984 Allocated for local/experimental use. For devices not
1985 assigned official numbers, these ranges should be
1986 used in order to avoid conflicting with future assignments.
1988 128-135 char Unix98 PTY masters
1990 These devices should not have corresponding device
1991 nodes; instead they should be accessed through the
1992 /dev/ptmx cloning interface.
1994 128 block SCSI disk devices (128-143)
1995 0 = /dev/sddy 129th SCSI disk whole disk
1996 16 = /dev/sddz 130th SCSI disk whole disk
1997 32 = /dev/sdea 131th SCSI disk whole disk
1998 ...
1999 240 = /dev/sden 144th SCSI disk whole disk
2001 Partitions are handled in the same way as for IDE
2002 disks (see major number 3) except that the limit on
2003 partitions is 15.
2005 129 block SCSI disk devices (144-159)
2006 0 = /dev/sdeo 145th SCSI disk whole disk
2007 16 = /dev/sdep 146th SCSI disk whole disk
2008 32 = /dev/sdeq 147th SCSI disk whole disk
2009 ...
2010 240 = /dev/sdfd 160th SCSI disk whole disk
2012 Partitions are handled in the same way as for IDE
2013 disks (see major number 3) except that the limit on
2014 partitions is 15.
2016 130 char (Misc devices)
2018 130 block SCSI disk devices (160-175)
2019 0 = /dev/sdfe 161st SCSI disk whole disk
2020 16 = /dev/sdff 162nd SCSI disk whole disk
2021 32 = /dev/sdfg 163rd SCSI disk whole disk
2022 ...
2023 240 = /dev/sdft 176th SCSI disk whole disk
2025 Partitions are handled in the same way as for IDE
2026 disks (see major number 3) except that the limit on
2027 partitions is 15.
2029 131 block SCSI disk devices (176-191)
2030 0 = /dev/sdfu 177th SCSI disk whole disk
2031 16 = /dev/sdfv 178th SCSI disk whole disk
2032 32 = /dev/sdfw 179th SCSI disk whole disk
2033 ...
2034 240 = /dev/sdgj 192nd SCSI disk whole disk
2036 Partitions are handled in the same way as for IDE
2037 disks (see major number 3) except that the limit on
2038 partitions is 15.
2040 132 block SCSI disk devices (192-207)
2041 0 = /dev/sdgk 193rd SCSI disk whole disk
2042 16 = /dev/sdgl 194th SCSI disk whole disk
2043 32 = /dev/sdgm 195th SCSI disk whole disk
2044 ...
2045 240 = /dev/sdgz 208th SCSI disk whole disk
2047 Partitions are handled in the same way as for IDE
2048 disks (see major number 3) except that the limit on
2049 partitions is 15.
2051 133 block SCSI disk devices (208-223)
2052 0 = /dev/sdha 209th SCSI disk whole disk
2053 16 = /dev/sdhb 210th SCSI disk whole disk
2054 32 = /dev/sdhc 211th SCSI disk whole disk
2055 ...
2056 240 = /dev/sdhp 224th SCSI disk whole disk
2058 Partitions are handled in the same way as for IDE
2059 disks (see major number 3) except that the limit on
2060 partitions is 15.
2062 134 block SCSI disk devices (224-239)
2063 0 = /dev/sdhq 225th SCSI disk whole disk
2064 16 = /dev/sdhr 226th SCSI disk whole disk
2065 32 = /dev/sdhs 227th SCSI disk whole disk
2066 ...
2067 240 = /dev/sdif 240th SCSI disk whole disk
2069 Partitions are handled in the same way as for IDE
2070 disks (see major number 3) except that the limit on
2071 partitions is 15.
2073 135 block SCSI disk devices (240-255)
2074 0 = /dev/sdig 241st SCSI disk whole disk
2075 16 = /dev/sdih 242nd SCSI disk whole disk
2076 32 = /dev/sdih 243rd SCSI disk whole disk
2077 ...
2078 240 = /dev/sdiv 256th SCSI disk whole disk
2080 Partitions are handled in the same way as for IDE
2081 disks (see major number 3) except that the limit on
2082 partitions is 15.
2084 136-143 char Unix98 PTY slaves
2085 0 = /dev/pts/0 First Unix98 pseudo-TTY
2086 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2087 ...
2089 These device nodes are automatically generated with
2090 the proper permissions and modes by mounting the
2091 devpts filesystem onto /dev/pts with the appropriate
2092 mount options (distribution dependent, however, on
2093 *most* distributions the appropriate options are
2094 "mode=0620,gid=<gid of the "tty" group>".)
2096 136 block Mylex DAC960 PCI RAID controller; ninth controller
2097 0 = /dev/rd/c8d0 First disk, whole disk
2098 8 = /dev/rd/c8d1 Second disk, whole disk
2099 ...
2100 248 = /dev/rd/c8d31 32nd disk, whole disk
2102 Partitions are handled as for major 48.
2104 137 block Mylex DAC960 PCI RAID controller; tenth controller
2105 0 = /dev/rd/c9d0 First disk, whole disk
2106 8 = /dev/rd/c9d1 Second disk, whole disk
2107 ...
2108 248 = /dev/rd/c9d31 32nd disk, whole disk
2110 Partitions are handled as for major 48.
2112 138 block Mylex DAC960 PCI RAID controller; eleventh controller
2113 0 = /dev/rd/c10d0 First disk, whole disk
2114 8 = /dev/rd/c10d1 Second disk, whole disk
2115 ...
2116 248 = /dev/rd/c10d31 32nd disk, whole disk
2118 Partitions are handled as for major 48.
2120 139 block Mylex DAC960 PCI RAID controller; twelfth controller
2121 0 = /dev/rd/c11d0 First disk, whole disk
2122 8 = /dev/rd/c11d1 Second disk, whole disk
2123 ...
2124 248 = /dev/rd/c11d31 32nd disk, whole disk
2126 Partitions are handled as for major 48.
2128 140 block Mylex DAC960 PCI RAID controller; thirteenth controller
2129 0 = /dev/rd/c12d0 First disk, whole disk
2130 8 = /dev/rd/c12d1 Second disk, whole disk
2131 ...
2132 248 = /dev/rd/c12d31 32nd disk, whole disk
2134 Partitions are handled as for major 48.
2136 141 block Mylex DAC960 PCI RAID controller; fourteenth controller
2137 0 = /dev/rd/c13d0 First disk, whole disk
2138 8 = /dev/rd/c13d1 Second disk, whole disk
2139 ...
2140 248 = /dev/rd/c13d31 32nd disk, whole disk
2142 Partitions are handled as for major 48.
2144 142 block Mylex DAC960 PCI RAID controller; fifteenth controller
2145 0 = /dev/rd/c14d0 First disk, whole disk
2146 8 = /dev/rd/c14d1 Second disk, whole disk
2147 ...
2148 248 = /dev/rd/c14d31 32nd disk, whole disk
2150 Partitions are handled as for major 48.
2152 143 block Mylex DAC960 PCI RAID controller; sixteenth controller
2153 0 = /dev/rd/c15d0 First disk, whole disk
2154 8 = /dev/rd/c15d1 Second disk, whole disk
2155 ...
2156 248 = /dev/rd/c15d31 32nd disk, whole disk
2158 Partitions are handled as for major 48.
2160 144 char Encapsulated PPP
2161 0 = /dev/pppox0 First PPP over Ethernet
2162 ...
2163 63 = /dev/pppox63 64th PPP over Ethernet
2165 This is primarily used for ADSL.
2167 The SST 5136-DN DeviceNet interface driver has been
2168 relocated to major 183 due to an unfortunate conflict.
2170 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2171 0 = mounted device 256
2172 255 = mounted device 511
2174 145 char SAM9407-based soundcard
2175 0 = /dev/sam0_mixer
2176 1 = /dev/sam0_sequencer
2177 2 = /dev/sam0_midi00
2178 3 = /dev/sam0_dsp
2179 4 = /dev/sam0_audio
2180 6 = /dev/sam0_sndstat
2181 18 = /dev/sam0_midi01
2182 34 = /dev/sam0_midi02
2183 50 = /dev/sam0_midi03
2184 64 = /dev/sam1_mixer
2185 ...
2186 128 = /dev/sam2_mixer
2187 ...
2188 192 = /dev/sam3_mixer
2189 ...
2191 Device functions match OSS, but offer a number of
2192 addons, which are sam9407 specific. OSS can be
2193 operated simultaneously, taking care of the codec.
2195 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2196 0 = mounted device 512
2197 255 = mounted device 767
2199 146 char SYSTRAM SCRAMNet mirrored-memory network
2200 0 = /dev/scramnet0 First SCRAMNet device
2201 1 = /dev/scramnet1 Second SCRAMNet device
2202 ...
2204 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2205 0 = mounted device 768
2206 255 = mounted device 1023
2208 147 char Aureal Semiconductor Vortex Audio device
2209 0 = /dev/aureal0 First Aureal Vortex
2210 1 = /dev/aureal1 Second Aureal Vortex
2211 ...
2213 147 block Distributed Replicated Block Device (DRBD)
2214 0 = /dev/drbd0 First DRBD device
2215 1 = /dev/drbd1 Second DRBD device
2216 ...
2218 148 char Technology Concepts serial card
2219 0 = /dev/ttyT0 First TCL port
2220 1 = /dev/ttyT1 Second TCL port
2221 ...
2223 149 char Technology Concepts serial card - alternate devices
2224 0 = /dev/cut0 Callout device for ttyT0
2225 1 = /dev/cut0 Callout device for ttyT1
2226 ...
2228 150 char Real-Time Linux FIFOs
2229 0 = /dev/rtf0 First RTLinux FIFO
2230 1 = /dev/rtf1 Second RTLinux FIFO
2231 ...
2233 151 char DPT I2O SmartRaid V controller
2234 0 = /dev/dpti0 First DPT I2O adapter
2235 1 = /dev/dpti1 Second DPT I2O adapter
2236 ...
2238 152 char EtherDrive Control Device
2239 0 = /dev/etherd/ctl Connect/Disconnect an EtherDrive
2240 1 = /dev/etherd/err Monitor errors
2241 2 = /dev/etherd/raw Raw AoE packet monitor
2243 152 block EtherDrive Block Devices
2244 0 = /dev/etherd/0 EtherDrive 0
2245 ...
2246 255 = /dev/etherd/255 EtherDrive 255
2248 153 char SPI Bus Interface (sometimes referred to as MicroWire)
2249 0 = /dev/spi0 First SPI device on the bus
2250 1 = /dev/spi1 Second SPI device on the bus
2251 ...
2252 15 = /dev/spi15 Sixteenth SPI device on the bus
2254 153 block Enhanced Metadisk RAID (EMD) storage units
2255 0 = /dev/emd/0 First unit
2256 1 = /dev/emd/0p1 Partition 1 on First unit
2257 2 = /dev/emd/0p2 Partition 2 on First unit
2258 ...
2259 15 = /dev/emd/0p15 Partition 15 on First unit
2261 16 = /dev/emd/1 Second unit
2262 32 = /dev/emd/2 Third unit
2263 ...
2264 240 = /dev/emd/15 Sixteenth unit
2266 Partitions are handled in the same way as for IDE
2267 disks (see major number 3) except that the limit on
2268 partitions is 15.
2270 154 char Specialix RIO serial card
2271 0 = /dev/ttySR0 First RIO port
2272 ...
2273 255 = /dev/ttySR255 256th RIO port
2275 155 char Specialix RIO serial card - alternate devices
2276 0 = /dev/cusr0 Callout device for ttySR0
2277 ...
2278 255 = /dev/cusr255 Callout device for ttySR255
2280 156 char Specialix RIO serial card
2281 0 = /dev/ttySR256 257th RIO port
2282 ...
2283 255 = /dev/ttySR511 512th RIO port
2285 157 char Specialix RIO serial card - alternate devices
2286 0 = /dev/cusr256 Callout device for ttySR256
2287 ...
2288 255 = /dev/cusr511 Callout device for ttySR511
2290 158 char Dialogic GammaLink fax driver
2291 0 = /dev/gfax0 GammaLink channel 0
2292 1 = /dev/gfax1 GammaLink channel 1
2293 ...
2295 159 char RESERVED
2297 159 block RESERVED
2299 160 char General Purpose Instrument Bus (GPIB)
2300 0 = /dev/gpib0 First GPIB bus
2301 1 = /dev/gpib1 Second GPIB bus
2302 ...
2304 160 block Carmel 8-port SATA Disks on First Controller
2305 0 = /dev/carmel/0 SATA disk 0 whole disk
2306 1 = /dev/carmel/0p1 SATA disk 0 partition 1
2307 ...
2308 31 = /dev/carmel/0p31 SATA disk 0 partition 31
2310 32 = /dev/carmel/1 SATA disk 1 whole disk
2311 64 = /dev/carmel/2 SATA disk 2 whole disk
2312 ...
2313 224 = /dev/carmel/7 SATA disk 7 whole disk
2315 Partitions are handled in the same way as for IDE
2316 disks (see major number 3) except that the limit on
2317 partitions is 31.
2319 161 char IrCOMM devices (IrDA serial/parallel emulation)
2320 0 = /dev/ircomm0 First IrCOMM device
2321 1 = /dev/ircomm1 Second IrCOMM device
2322 ...
2323 16 = /dev/irlpt0 First IrLPT device
2324 17 = /dev/irlpt1 Second IrLPT device
2325 ...
2327 161 block Carmel 8-port SATA Disks on Second Controller
2328 0 = /dev/carmel/8 SATA disk 8 whole disk
2329 1 = /dev/carmel/8p1 SATA disk 8 partition 1
2330 ...
2331 31 = /dev/carmel/8p31 SATA disk 8 partition 31
2333 32 = /dev/carmel/9 SATA disk 9 whole disk
2334 64 = /dev/carmel/10 SATA disk 10 whole disk
2335 ...
2336 224 = /dev/carmel/15 SATA disk 15 whole disk
2338 Partitions are handled in the same way as for IDE
2339 disks (see major number 3) except that the limit on
2340 partitions is 31.
2342 162 char Raw block device interface
2343 0 = /dev/rawctl Raw I/O control device
2344 1 = /dev/raw/raw1 First raw I/O device
2345 2 = /dev/raw/raw2 Second raw I/O device
2346 ...
2347 max minor number of raw device is set by kernel config
2348 MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
2350 163 char
2352 164 char Chase Research AT/PCI-Fast serial card
2353 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2354 ...
2355 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2356 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2357 ...
2358 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2359 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2360 ...
2361 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2362 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2363 ...
2364 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2366 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2367 0 = /dev/cuch0 Callout device for ttyCH0
2368 ...
2369 63 = /dev/cuch63 Callout device for ttyCH63
2371 166 char ACM USB modems
2372 0 = /dev/ttyACM0 First ACM modem
2373 1 = /dev/ttyACM1 Second ACM modem
2374 ...
2376 167 char ACM USB modems - alternate devices
2377 0 = /dev/cuacm0 Callout device for ttyACM0
2378 1 = /dev/cuacm1 Callout device for ttyACM1
2379 ...
2381 168 char Eracom CSA7000 PCI encryption adaptor
2382 0 = /dev/ecsa0 First CSA7000
2383 1 = /dev/ecsa1 Second CSA7000
2384 ...
2386 169 char Eracom CSA8000 PCI encryption adaptor
2387 0 = /dev/ecsa8-0 First CSA8000
2388 1 = /dev/ecsa8-1 Second CSA8000
2389 ...
2391 170 char AMI MegaRAC remote access controller
2392 0 = /dev/megarac0 First MegaRAC card
2393 1 = /dev/megarac1 Second MegaRAC card
2394 ...
2396 171 char Reserved for IEEE 1394 (Firewire)
2398 172 char Moxa Intellio serial card
2399 0 = /dev/ttyMX0 First Moxa port
2400 1 = /dev/ttyMX1 Second Moxa port
2401 ...
2402 127 = /dev/ttyMX127 128th Moxa port
2403 128 = /dev/moxactl Moxa control port
2405 173 char Moxa Intellio serial card - alternate devices
2406 0 = /dev/cumx0 Callout device for ttyMX0
2407 1 = /dev/cumx1 Callout device for ttyMX1
2408 ...
2409 127 = /dev/cumx127 Callout device for ttyMX127
2411 174 char SmartIO serial card
2412 0 = /dev/ttySI0 First SmartIO port
2413 1 = /dev/ttySI1 Second SmartIO port
2414 ...
2416 175 char SmartIO serial card - alternate devices
2417 0 = /dev/cusi0 Callout device for ttySI0
2418 1 = /dev/cusi1 Callout device for ttySI1
2419 ...
2421 176 char nCipher nFast PCI crypto accelerator
2422 0 = /dev/nfastpci0 First nFast PCI device
2423 1 = /dev/nfastpci1 First nFast PCI device
2424 ...
2426 177 char TI PCILynx memory spaces
2427 0 = /dev/pcilynx/aux0 AUX space of first PCILynx card
2428 ...
2429 15 = /dev/pcilynx/aux15 AUX space of 16th PCILynx card
2430 16 = /dev/pcilynx/rom0 ROM space of first PCILynx card
2431 ...
2432 31 = /dev/pcilynx/rom15 ROM space of 16th PCILynx card
2433 32 = /dev/pcilynx/ram0 RAM space of first PCILynx card
2434 ...
2435 47 = /dev/pcilynx/ram15 RAM space of 16th PCILynx card
2437 178 char Giganet cLAN1xxx virtual interface adapter
2438 0 = /dev/clanvi0 First cLAN adapter
2439 1 = /dev/clanvi1 Second cLAN adapter
2440 ...
2442 179 block MMC block devices
2443 0 = /dev/mmcblk0 First SD/MMC card
2444 1 = /dev/mmcblk0p1 First partition on first MMC card
2445 8 = /dev/mmcblk1 Second SD/MMC card
2446 ...
2448 The start of next SD/MMC card can be configured with
2449 CONFIG_MMC_BLOCK_MINORS, or overridden at boot/modprobe
2450 time using the mmcblk.perdev_minors option. That would
2451 bump the offset between each card to be the configured
2452 value instead of the default 8.
2454 179 char CCube DVXChip-based PCI products
2455 0 = /dev/dvxirq0 First DVX device
2456 1 = /dev/dvxirq1 Second DVX device
2457 ...
2459 180 char USB devices
2460 0 = /dev/usb/lp0 First USB printer
2461 ...
2462 15 = /dev/usb/lp15 16th USB printer
2463 48 = /dev/usb/scanner0 First USB scanner
2464 ...
2465 63 = /dev/usb/scanner15 16th USB scanner
2466 64 = /dev/usb/rio500 Diamond Rio 500
2467 65 = /dev/usb/usblcd USBLCD Interface (info@usblcd.de)
2468 66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
2469 96 = /dev/usb/hiddev0 1st USB HID device
2470 ...
2471 111 = /dev/usb/hiddev15 16th USB HID device
2472 112 = /dev/usb/auer0 1st auerswald ISDN device
2473 ...
2474 127 = /dev/usb/auer15 16th auerswald ISDN device
2475 128 = /dev/usb/brlvgr0 First Braille Voyager device
2476 ...
2477 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device
2478 132 = /dev/usb/idmouse ID Mouse (fingerprint scanner) device
2479 133 = /dev/usb/sisusbvga1 First SiSUSB VGA device
2480 ...
2481 140 = /dev/usb/sisusbvga8 Eighth SISUSB VGA device
2482 144 = /dev/usb/lcd USB LCD device
2483 160 = /dev/usb/legousbtower0 1st USB Legotower device
2484 ...
2485 175 = /dev/usb/legousbtower15 16th USB Legotower device
2486 176 = /dev/usb/usbtmc1 First USB TMC device
2487 ...
2488 191 = /dev/usb/usbtmc16 16th USB TMC device
2489 192 = /dev/usb/yurex1 First USB Yurex device
2490 ...
2491 209 = /dev/usb/yurex16 16th USB Yurex device
2493 180 block USB block devices
2494 0 = /dev/uba First USB block device
2495 8 = /dev/ubb Second USB block device
2496 16 = /dev/ubc Third USB block device
2497 ...
2499 181 char Conrad Electronic parallel port radio clocks
2500 0 = /dev/pcfclock0 First Conrad radio clock
2501 1 = /dev/pcfclock1 Second Conrad radio clock
2502 ...
2504 182 char Picture Elements THR2 binarizer
2505 0 = /dev/pethr0 First THR2 board
2506 1 = /dev/pethr1 Second THR2 board
2507 ...
2509 183 char SST 5136-DN DeviceNet interface
2510 0 = /dev/ss5136dn0 First DeviceNet interface
2511 1 = /dev/ss5136dn1 Second DeviceNet interface
2512 ...
2514 This device used to be assigned to major number 144.
2515 It had to be moved due to an unfortunate conflict.
2517 184 char Picture Elements' video simulator/sender
2518 0 = /dev/pevss0 First sender board
2519 1 = /dev/pevss1 Second sender board
2520 ...
2522 185 char InterMezzo high availability file system
2523 0 = /dev/intermezzo0 First cache manager
2524 1 = /dev/intermezzo1 Second cache manager
2525 ...
2527 See http://web.archive.org/web/20080115195241/
2528 http://inter-mezzo.org/index.html
2530 186 char Object-based storage control device
2531 0 = /dev/obd0 First obd control device
2532 1 = /dev/obd1 Second obd control device
2533 ...
2535 See ftp://ftp.lustre.org/pub/obd for code and information.
2537 187 char DESkey hardware encryption device
2538 0 = /dev/deskey0 First DES key
2539 1 = /dev/deskey1 Second DES key
2540 ...
2542 188 char USB serial converters
2543 0 = /dev/ttyUSB0 First USB serial converter
2544 1 = /dev/ttyUSB1 Second USB serial converter
2545 ...
2547 189 char USB serial converters - alternate devices
2548 0 = /dev/cuusb0 Callout device for ttyUSB0
2549 1 = /dev/cuusb1 Callout device for ttyUSB1
2550 ...
2552 190 char Kansas City tracker/tuner card
2553 0 = /dev/kctt0 First KCT/T card
2554 1 = /dev/kctt1 Second KCT/T card
2555 ...
2557 191 char Reserved for PCMCIA
2559 192 char Kernel profiling interface
2560 0 = /dev/profile Profiling control device
2561 1 = /dev/profile0 Profiling device for CPU 0
2562 2 = /dev/profile1 Profiling device for CPU 1
2563 ...
2565 193 char Kernel event-tracing interface
2566 0 = /dev/trace Tracing control device
2567 1 = /dev/trace0 Tracing device for CPU 0
2568 2 = /dev/trace1 Tracing device for CPU 1
2569 ...
2571 194 char linVideoStreams (LINVS)
2572 0 = /dev/mvideo/status0 Video compression status
2573 1 = /dev/mvideo/stream0 Video stream
2574 2 = /dev/mvideo/frame0 Single compressed frame
2575 3 = /dev/mvideo/rawframe0 Raw uncompressed frame
2576 4 = /dev/mvideo/codec0 Direct codec access
2577 5 = /dev/mvideo/video4linux0 Video4Linux compatibility
2579 16 = /dev/mvideo/status1 Second device
2580 ...
2581 32 = /dev/mvideo/status2 Third device
2582 ...
2583 ...
2584 240 = /dev/mvideo/status15 16th device
2585 ...
2587 195 char Nvidia graphics devices
2588 0 = /dev/nvidia0 First Nvidia card
2589 1 = /dev/nvidia1 Second Nvidia card
2590 ...
2591 255 = /dev/nvidiactl Nvidia card control device
2593 196 char Tormenta T1 card
2594 0 = /dev/tor/0 Master control channel for all cards
2595 1 = /dev/tor/1 First DS0
2596 2 = /dev/tor/2 Second DS0
2597 ...
2598 48 = /dev/tor/48 48th DS0
2599 49 = /dev/tor/49 First pseudo-channel
2600 50 = /dev/tor/50 Second pseudo-channel
2601 ...
2603 197 char OpenTNF tracing facility
2604 0 = /dev/tnf/t0 Trace 0 data extraction
2605 1 = /dev/tnf/t1 Trace 1 data extraction
2606 ...
2607 128 = /dev/tnf/status Tracing facility status
2608 130 = /dev/tnf/trace Tracing device
2610 198 char Total Impact TPMP2 quad coprocessor PCI card
2611 0 = /dev/tpmp2/0 First card
2612 1 = /dev/tpmp2/1 Second card
2613 ...
2615 199 char Veritas volume manager (VxVM) volumes
2616 0 = /dev/vx/rdsk/*/* First volume
2617 1 = /dev/vx/rdsk/*/* Second volume
2618 ...
2620 199 block Veritas volume manager (VxVM) volumes
2621 0 = /dev/vx/dsk/*/* First volume
2622 1 = /dev/vx/dsk/*/* Second volume
2623 ...
2625 The namespace in these directories is maintained by
2626 the user space VxVM software.
2628 200 char Veritas VxVM configuration interface
2629 0 = /dev/vx/config Configuration access node
2630 1 = /dev/vx/trace Volume i/o trace access node
2631 2 = /dev/vx/iod Volume i/o daemon access node
2632 3 = /dev/vx/info Volume information access node
2633 4 = /dev/vx/task Volume tasks access node
2634 5 = /dev/vx/taskmon Volume tasks monitor daemon
2636 201 char Veritas VxVM dynamic multipathing driver
2637 0 = /dev/vx/rdmp/* First multipath device
2638 1 = /dev/vx/rdmp/* Second multipath device
2639 ...
2640 201 block Veritas VxVM dynamic multipathing driver
2641 0 = /dev/vx/dmp/* First multipath device
2642 1 = /dev/vx/dmp/* Second multipath device
2643 ...
2645 The namespace in these directories is maintained by
2646 the user space VxVM software.
2648 202 char CPU model-specific registers
2649 0 = /dev/cpu/0/msr MSRs on CPU 0
2650 1 = /dev/cpu/1/msr MSRs on CPU 1
2651 ...
2653 202 block Xen Virtual Block Device
2654 0 = /dev/xvda First Xen VBD whole disk
2655 16 = /dev/xvdb Second Xen VBD whole disk
2656 32 = /dev/xvdc Third Xen VBD whole disk
2657 ...
2658 240 = /dev/xvdp Sixteenth Xen VBD whole disk
2660 Partitions are handled in the same way as for IDE
2661 disks (see major number 3) except that the limit on
2662 partitions is 15.
2664 203 char CPU CPUID information
2665 0 = /dev/cpu/0/cpuid CPUID on CPU 0
2666 1 = /dev/cpu/1/cpuid CPUID on CPU 1
2667 ...
2669 204 char Low-density serial ports
2670 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2671 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2672 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2673 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2674 4 = /dev/ttyFB0 Intel Footbridge (ARM)
2675 5 = /dev/ttySA0 StrongARM builtin serial port 0
2676 6 = /dev/ttySA1 StrongARM builtin serial port 1
2677 7 = /dev/ttySA2 StrongARM builtin serial port 2
2678 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2679 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2680 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2681 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2682 12 = /dev/ttyFW0 Firmware console - port 0
2683 13 = /dev/ttyFW1 Firmware console - port 1
2684 14 = /dev/ttyFW2 Firmware console - port 2
2685 15 = /dev/ttyFW3 Firmware console - port 3
2686 16 = /dev/ttyAM0 ARM "AMBA" serial port 0
2687 ...
2688 31 = /dev/ttyAM15 ARM "AMBA" serial port 15
2689 32 = /dev/ttyDB0 DataBooster serial port 0
2690 ...
2691 39 = /dev/ttyDB7 DataBooster serial port 7
2692 40 = /dev/ttySG0 SGI Altix console port
2693 41 = /dev/ttySMX0 Motorola i.MX - port 0
2694 42 = /dev/ttySMX1 Motorola i.MX - port 1
2695 43 = /dev/ttySMX2 Motorola i.MX - port 2
2696 44 = /dev/ttyMM0 Marvell MPSC - port 0
2697 45 = /dev/ttyMM1 Marvell MPSC - port 1
2698 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2699 ...
2700 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2701 50 = /dev/ttyIOC0 Altix serial card
2702 ...
2703 81 = /dev/ttyIOC31 Altix serial card
2704 82 = /dev/ttyVR0 NEC VR4100 series SIU
2705 83 = /dev/ttyVR1 NEC VR4100 series DSIU
2706 84 = /dev/ttyIOC84 Altix ioc4 serial card
2707 ...
2708 115 = /dev/ttyIOC115 Altix ioc4 serial card
2709 116 = /dev/ttySIOC0 Altix ioc3 serial card
2710 ...
2711 147 = /dev/ttySIOC31 Altix ioc3 serial card
2712 148 = /dev/ttyPSC0 PPC PSC - port 0
2713 ...
2714 153 = /dev/ttyPSC5 PPC PSC - port 5
2715 154 = /dev/ttyAT0 ATMEL serial port 0
2716 ...
2717 169 = /dev/ttyAT15 ATMEL serial port 15
2718 170 = /dev/ttyNX0 Hilscher netX serial port 0
2719 ...
2720 185 = /dev/ttyNX15 Hilscher netX serial port 15
2721 186 = /dev/ttyJ0 JTAG1 DCC protocol based serial port emulation
2722 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2723 ...
2724 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2725 191 = /dev/xvc0 Xen virtual console - port 0
2726 192 = /dev/ttyPZ0 pmac_zilog - port 0
2727 ...
2728 195 = /dev/ttyPZ3 pmac_zilog - port 3
2729 196 = /dev/ttyTX0 TX39/49 serial port 0
2730 ...
2731 204 = /dev/ttyTX7 TX39/49 serial port 7
2732 205 = /dev/ttySC0 SC26xx serial port 0
2733 206 = /dev/ttySC1 SC26xx serial port 1
2734 207 = /dev/ttySC2 SC26xx serial port 2
2735 208 = /dev/ttySC3 SC26xx serial port 3
2736 209 = /dev/ttyMAX0 MAX3100 serial port 0
2737 210 = /dev/ttyMAX1 MAX3100 serial port 1
2738 211 = /dev/ttyMAX2 MAX3100 serial port 2
2739 212 = /dev/ttyMAX3 MAX3100 serial port 3
2741 205 char Low-density serial ports (alternate device)
2742 0 = /dev/culu0 Callout device for ttyLU0
2743 1 = /dev/culu1 Callout device for ttyLU1
2744 2 = /dev/culu2 Callout device for ttyLU2
2745 3 = /dev/culu3 Callout device for ttyLU3
2746 4 = /dev/cufb0 Callout device for ttyFB0
2747 5 = /dev/cusa0 Callout device for ttySA0
2748 6 = /dev/cusa1 Callout device for ttySA1
2749 7 = /dev/cusa2 Callout device for ttySA2
2750 8 = /dev/cusc0 Callout device for ttySC0
2751 9 = /dev/cusc1 Callout device for ttySC1
2752 10 = /dev/cusc2 Callout device for ttySC2
2753 11 = /dev/cusc3 Callout device for ttySC3
2754 12 = /dev/cufw0 Callout device for ttyFW0
2755 13 = /dev/cufw1 Callout device for ttyFW1
2756 14 = /dev/cufw2 Callout device for ttyFW2
2757 15 = /dev/cufw3 Callout device for ttyFW3
2758 16 = /dev/cuam0 Callout device for ttyAM0
2759 ...
2760 31 = /dev/cuam15 Callout device for ttyAM15
2761 32 = /dev/cudb0 Callout device for ttyDB0
2762 ...
2763 39 = /dev/cudb7 Callout device for ttyDB7
2764 40 = /dev/cusg0 Callout device for ttySG0
2765 41 = /dev/ttycusmx0 Callout device for ttySMX0
2766 42 = /dev/ttycusmx1 Callout device for ttySMX1
2767 43 = /dev/ttycusmx2 Callout device for ttySMX2
2768 46 = /dev/cucpm0 Callout device for ttyCPM0
2769 ...
2770 49 = /dev/cucpm5 Callout device for ttyCPM5
2771 50 = /dev/cuioc40 Callout device for ttyIOC40
2772 ...
2773 81 = /dev/cuioc431 Callout device for ttyIOC431
2774 82 = /dev/cuvr0 Callout device for ttyVR0
2775 83 = /dev/cuvr1 Callout device for ttyVR1
2777 206 char OnStream SC-x0 tape devices
2778 0 = /dev/osst0 First OnStream SCSI tape, mode 0
2779 1 = /dev/osst1 Second OnStream SCSI tape, mode 0
2780 ...
2781 32 = /dev/osst0l First OnStream SCSI tape, mode 1
2782 33 = /dev/osst1l Second OnStream SCSI tape, mode 1
2783 ...
2784 64 = /dev/osst0m First OnStream SCSI tape, mode 2
2785 65 = /dev/osst1m Second OnStream SCSI tape, mode 2
2786 ...
2787 96 = /dev/osst0a First OnStream SCSI tape, mode 3
2788 97 = /dev/osst1a Second OnStream SCSI tape, mode 3
2789 ...
2790 128 = /dev/nosst0 No rewind version of /dev/osst0
2791 129 = /dev/nosst1 No rewind version of /dev/osst1
2792 ...
2793 160 = /dev/nosst0l No rewind version of /dev/osst0l
2794 161 = /dev/nosst1l No rewind version of /dev/osst1l
2795 ...
2796 192 = /dev/nosst0m No rewind version of /dev/osst0m
2797 193 = /dev/nosst1m No rewind version of /dev/osst1m
2798 ...
2799 224 = /dev/nosst0a No rewind version of /dev/osst0a
2800 225 = /dev/nosst1a No rewind version of /dev/osst1a
2801 ...
2803 The OnStream SC-x0 SCSI tapes do not support the
2804 standard SCSI SASD command set and therefore need
2805 their own driver "osst". Note that the IDE, USB (and
2806 maybe ParPort) versions may be driven via ide-scsi or
2807 usb-storage SCSI emulation and this osst device and
2808 driver as well. The ADR-x0 drives are QIC-157
2809 compliant and don't need osst.
2811 207 char Compaq ProLiant health feature indicate
2812 0 = /dev/cpqhealth/cpqw Redirector interface
2813 1 = /dev/cpqhealth/crom EISA CROM
2814 2 = /dev/cpqhealth/cdt Data Table
2815 3 = /dev/cpqhealth/cevt Event Log
2816 4 = /dev/cpqhealth/casr Automatic Server Recovery
2817 5 = /dev/cpqhealth/cecc ECC Memory
2818 6 = /dev/cpqhealth/cmca Machine Check Architecture
2819 7 = /dev/cpqhealth/ccsm Deprecated CDT
2820 8 = /dev/cpqhealth/cnmi NMI Handling
2821 9 = /dev/cpqhealth/css Sideshow Management
2822 10 = /dev/cpqhealth/cram CMOS interface
2823 11 = /dev/cpqhealth/cpci PCI IRQ interface
2825 208 char User space serial ports
2826 0 = /dev/ttyU0 First user space serial port
2827 1 = /dev/ttyU1 Second user space serial port
2828 ...
2830 209 char User space serial ports (alternate devices)
2831 0 = /dev/cuu0 Callout device for ttyU0
2832 1 = /dev/cuu1 Callout device for ttyU1
2833 ...
2835 210 char SBE, Inc. sync/async serial card
2836 0 = /dev/sbei/wxcfg0 Configuration device for board 0
2837 1 = /dev/sbei/dld0 Download device for board 0
2838 2 = /dev/sbei/wan00 WAN device, port 0, board 0
2839 3 = /dev/sbei/wan01 WAN device, port 1, board 0
2840 4 = /dev/sbei/wan02 WAN device, port 2, board 0
2841 5 = /dev/sbei/wan03 WAN device, port 3, board 0
2842 6 = /dev/sbei/wanc00 WAN clone device, port 0, board 0
2843 7 = /dev/sbei/wanc01 WAN clone device, port 1, board 0
2844 8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
2845 9 = /dev/sbei/wanc03 WAN clone device, port 3, board 0
2846 10 = /dev/sbei/wxcfg1 Configuration device for board 1
2847 11 = /dev/sbei/dld1 Download device for board 1
2848 12 = /dev/sbei/wan10 WAN device, port 0, board 1
2849 13 = /dev/sbei/wan11 WAN device, port 1, board 1
2850 14 = /dev/sbei/wan12 WAN device, port 2, board 1
2851 15 = /dev/sbei/wan13 WAN device, port 3, board 1
2852 16 = /dev/sbei/wanc10 WAN clone device, port 0, board 1
2853 17 = /dev/sbei/wanc11 WAN clone device, port 1, board 1
2854 18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
2855 19 = /dev/sbei/wanc13 WAN clone device, port 3, board 1
2856 ...
2858 Yes, each board is really spaced 10 (decimal) apart.
2860 211 char Addinum CPCI1500 digital I/O card
2861 0 = /dev/addinum/cpci1500/0 First CPCI1500 card
2862 1 = /dev/addinum/cpci1500/1 Second CPCI1500 card
2863 ...
2865 212 char LinuxTV.org DVB driver subsystem
2866 0 = /dev/dvb/adapter0/video0 first video decoder of first card
2867 1 = /dev/dvb/adapter0/audio0 first audio decoder of first card
2868 2 = /dev/dvb/adapter0/sec0 (obsolete/unused)
2869 3 = /dev/dvb/adapter0/frontend0 first frontend device of first card
2870 4 = /dev/dvb/adapter0/demux0 first demux device of first card
2871 5 = /dev/dvb/adapter0/dvr0 first digital video recoder device of first card
2872 6 = /dev/dvb/adapter0/ca0 first common access port of first card
2873 7 = /dev/dvb/adapter0/net0 first network device of first card
2874 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2875 9 = /dev/dvb/adapter0/video1 second video decoder of first card
2876 ...
2877 64 = /dev/dvb/adapter1/video0 first video decoder of second card
2878 ...
2879 128 = /dev/dvb/adapter2/video0 first video decoder of third card
2880 ...
2881 196 = /dev/dvb/adapter3/video0 first video decoder of fourth card
2883 216 char Bluetooth RFCOMM TTY devices
2884 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device
2885 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device
2886 ...
2888 217 char Bluetooth RFCOMM TTY devices (alternate devices)
2889 0 = /dev/curf0 Callout device for rfcomm0
2890 1 = /dev/curf1 Callout device for rfcomm1
2891 ...
2893 218 char The Logical Company bus Unibus/Qbus adapters
2894 0 = /dev/logicalco/bci/0 First bus adapter
2895 1 = /dev/logicalco/bci/1 First bus adapter
2896 ...
2898 219 char The Logical Company DCI-1300 digital I/O card
2899 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2900 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2901 ...
2903 220 char Myricom Myrinet "GM" board
2904 0 = /dev/myricom/gm0 First Myrinet GM board
2905 1 = /dev/myricom/gmp0 First board "root access"
2906 2 = /dev/myricom/gm1 Second Myrinet GM board
2907 3 = /dev/myricom/gmp1 Second board "root access"
2908 ...
2910 221 char VME bus
2911 0 = /dev/bus/vme/m0 First master image
2912 1 = /dev/bus/vme/m1 Second master image
2913 2 = /dev/bus/vme/m2 Third master image
2914 3 = /dev/bus/vme/m3 Fourth master image
2915 4 = /dev/bus/vme/s0 First slave image
2916 5 = /dev/bus/vme/s1 Second slave image
2917 6 = /dev/bus/vme/s2 Third slave image
2918 7 = /dev/bus/vme/s3 Fourth slave image
2919 8 = /dev/bus/vme/ctl Control
2921 It is expected that all VME bus drivers will use the
2922 same interface. For interface documentation see
2923 http://www.vmelinux.org/.
2925 224 char A2232 serial card
2926 0 = /dev/ttyY0 First A2232 port
2927 1 = /dev/ttyY1 Second A2232 port
2928 ...
2930 225 char A2232 serial card (alternate devices)
2931 0 = /dev/cuy0 Callout device for ttyY0
2932 1 = /dev/cuy1 Callout device for ttyY1
2933 ...
2935 226 char Direct Rendering Infrastructure (DRI)
2936 0 = /dev/dri/card0 First graphics card
2937 1 = /dev/dri/card1 Second graphics card
2938 ...
2940 227 char IBM 3270 terminal Unix tty access
2941 1 = /dev/3270/tty1 First 3270 terminal
2942 2 = /dev/3270/tty2 Seconds 3270 terminal
2943 ...
2945 228 char IBM 3270 terminal block-mode access
2946 0 = /dev/3270/tub Controlling interface
2947 1 = /dev/3270/tub1 First 3270 terminal
2948 2 = /dev/3270/tub2 Second 3270 terminal
2949 ...
2951 229 char IBM iSeries/pSeries virtual console
2952 0 = /dev/hvc0 First console port
2953 1 = /dev/hvc1 Second console port
2954 ...
2956 230 char IBM iSeries virtual tape
2957 0 = /dev/iseries/vt0 First virtual tape, mode 0
2958 1 = /dev/iseries/vt1 Second virtual tape, mode 0
2959 ...
2960 32 = /dev/iseries/vt0l First virtual tape, mode 1
2961 33 = /dev/iseries/vt1l Second virtual tape, mode 1
2962 ...
2963 64 = /dev/iseries/vt0m First virtual tape, mode 2
2964 65 = /dev/iseries/vt1m Second virtual tape, mode 2
2965 ...
2966 96 = /dev/iseries/vt0a First virtual tape, mode 3
2967 97 = /dev/iseries/vt1a Second virtual tape, mode 3
2968 ...
2969 128 = /dev/iseries/nvt0 First virtual tape, mode 0, no rewind
2970 129 = /dev/iseries/nvt1 Second virtual tape, mode 0, no rewind
2971 ...
2972 160 = /dev/iseries/nvt0l First virtual tape, mode 1, no rewind
2973 161 = /dev/iseries/nvt1l Second virtual tape, mode 1, no rewind
2974 ...
2975 192 = /dev/iseries/nvt0m First virtual tape, mode 2, no rewind
2976 193 = /dev/iseries/nvt1m Second virtual tape, mode 2, no rewind
2977 ...
2978 224 = /dev/iseries/nvt0a First virtual tape, mode 3, no rewind
2979 225 = /dev/iseries/nvt1a Second virtual tape, mode 3, no rewind
2980 ...
2982 "No rewind" refers to the omission of the default
2983 automatic rewind on device close. The MTREW or MTOFFL
2984 ioctl()'s can be used to rewind the tape regardless of
2985 the device used to access it.
2987 231 char InfiniBand
2988 0 = /dev/infiniband/umad0
2989 1 = /dev/infiniband/umad1
2990 ...
2991 63 = /dev/infiniband/umad63 63rd InfiniBandMad device
2992 64 = /dev/infiniband/issm0 First InfiniBand IsSM device
2993 65 = /dev/infiniband/issm1 Second InfiniBand IsSM device
2994 ...
2995 127 = /dev/infiniband/issm63 63rd InfiniBand IsSM device
2996 128 = /dev/infiniband/uverbs0 First InfiniBand verbs device
2997 129 = /dev/infiniband/uverbs1 Second InfiniBand verbs device
2998 ...
2999 159 = /dev/infiniband/uverbs31 31st InfiniBand verbs device
3001 232 char Biometric Devices
3002 0 = /dev/biometric/sensor0/fingerprint first fingerprint sensor on first device
3003 1 = /dev/biometric/sensor0/iris first iris sensor on first device
3004 2 = /dev/biometric/sensor0/retina first retina sensor on first device
3005 3 = /dev/biometric/sensor0/voiceprint first voiceprint sensor on first device
3006 4 = /dev/biometric/sensor0/facial first facial sensor on first device
3007 5 = /dev/biometric/sensor0/hand first hand sensor on first device
3008 ...
3009 10 = /dev/biometric/sensor1/fingerprint first fingerprint sensor on second device
3010 ...
3011 20 = /dev/biometric/sensor2/fingerprint first fingerprint sensor on third device
3012 ...
3014 233 char PathScale InfiniPath interconnect
3015 0 = /dev/ipath Primary device for programs (any unit)
3016 1 = /dev/ipath0 Access specifically to unit 0
3017 2 = /dev/ipath1 Access specifically to unit 1
3018 ...
3019 4 = /dev/ipath3 Access specifically to unit 3
3020 129 = /dev/ipath_sma Device used by Subnet Management Agent
3021 130 = /dev/ipath_diag Device used by diagnostics programs
3023 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3024 Character devices that request a dynamic allocation of major number will
3025 take numbers starting from 254 and downward.
3027 240-254 block LOCAL/EXPERIMENTAL USE
3028 Allocated for local/experimental use. For devices not
3029 assigned official numbers, these ranges should be
3030 used in order to avoid conflicting with future assignments.
3032 255 char RESERVED
3034 255 block RESERVED
3036 This major is reserved to assist the expansion to a
3037 larger number space. No device nodes with this major
3038 should ever be created on the filesystem.
3039 (This is probably not true anymore, but I'll leave it
3040 for now /Torben)
3042 ---LARGE MAJORS!!!!!---
3044 256 char Equinox SST multi-port serial boards
3045 0 = /dev/ttyEQ0 First serial port on first Equinox SST board
3046 127 = /dev/ttyEQ127 Last serial port on first Equinox SST board
3047 128 = /dev/ttyEQ128 First serial port on second Equinox SST board
3048 ...
3049 1027 = /dev/ttyEQ1027 Last serial port on eighth Equinox SST board
3051 256 block Resident Flash Disk Flash Translation Layer
3052 0 = /dev/rfda First RFD FTL layer
3053 16 = /dev/rfdb Second RFD FTL layer
3054 ...
3055 240 = /dev/rfdp 16th RFD FTL layer
3057 257 char Phoenix Technologies Cryptographic Services Driver
3058 0 = /dev/ptlsec Crypto Services Driver
3060 257 block SSFDC Flash Translation Layer filesystem
3061 0 = /dev/ssfdca First SSFDC layer
3062 8 = /dev/ssfdcb Second SSFDC layer
3063 16 = /dev/ssfdcc Third SSFDC layer
3064 24 = /dev/ssfdcd 4th SSFDC layer
3065 32 = /dev/ssfdce 5th SSFDC layer
3066 40 = /dev/ssfdcf 6th SSFDC layer
3067 48 = /dev/ssfdcg 7th SSFDC layer
3068 56 = /dev/ssfdch 8th SSFDC layer
3070 258 block ROM/Flash read-only translation layer
3071 0 = /dev/blockrom0 First ROM card's translation layer interface
3072 1 = /dev/blockrom1 Second ROM card's translation layer interface
3073 ...
3075 259 block Block Extended Major
3076 Used dynamically to hold additional partition minor
3077 numbers and allow large numbers of partitions per device
3079 259 char FPGA configuration interfaces
3080 0 = /dev/icap0 First Xilinx internal configuration
3081 1 = /dev/icap1 Second Xilinx internal configuration
3083 260 char OSD (Object-based-device) SCSI Device
3084 0 = /dev/osd0 First OSD Device
3085 1 = /dev/osd1 Second OSD Device
3086 ...
3087 255 = /dev/osd255 256th OSD Device
3089 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3090 Character devices that request a dynamic allocation of major
3091 number will take numbers starting from 511 and downward,
3092 once the 234-254 range is full.