Merge 5.0-rc6 into driver-core-next
[linux/fpc-iii.git] / drivers / ata / ahci_ceva.c
blobdc78c98cb9f102caf651ac36bbe794fcdf0ac960
1 /*
2 * Copyright (C) 2015 Xilinx, Inc.
3 * CEVA AHCI SATA platform driver
5 * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms and conditions of the GNU General Public License,
9 * version 2, as published by the Free Software Foundation.
11 * This program is distributed in the hope it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * more details.
16 * You should have received a copy of the GNU General Public License along with
17 * this program. If not, see <http://www.gnu.org/licenses/>.
20 #include <linux/ahci_platform.h>
21 #include <linux/kernel.h>
22 #include <linux/libata.h>
23 #include <linux/module.h>
24 #include <linux/of_device.h>
25 #include <linux/platform_device.h>
26 #include "ahci.h"
28 /* Vendor Specific Register Offsets */
29 #define AHCI_VEND_PCFG 0xA4
30 #define AHCI_VEND_PPCFG 0xA8
31 #define AHCI_VEND_PP2C 0xAC
32 #define AHCI_VEND_PP3C 0xB0
33 #define AHCI_VEND_PP4C 0xB4
34 #define AHCI_VEND_PP5C 0xB8
35 #define AHCI_VEND_AXICC 0xBC
36 #define AHCI_VEND_PAXIC 0xC0
37 #define AHCI_VEND_PTC 0xC8
39 /* Vendor Specific Register bit definitions */
40 #define PAXIC_ADBW_BW64 0x1
41 #define PAXIC_MAWID(i) (((i) * 2) << 4)
42 #define PAXIC_MARID(i) (((i) * 2) << 12)
43 #define PAXIC_MARIDD(i) ((((i) * 2) + 1) << 16)
44 #define PAXIC_MAWIDD(i) ((((i) * 2) + 1) << 8)
45 #define PAXIC_OTL (0x4 << 20)
47 /* Register bit definitions for cache control */
48 #define AXICC_ARCA_VAL (0xF << 0)
49 #define AXICC_ARCF_VAL (0xF << 4)
50 #define AXICC_ARCH_VAL (0xF << 8)
51 #define AXICC_ARCP_VAL (0xF << 12)
52 #define AXICC_AWCFD_VAL (0xF << 16)
53 #define AXICC_AWCD_VAL (0xF << 20)
54 #define AXICC_AWCF_VAL (0xF << 24)
56 #define PCFG_TPSS_VAL (0x32 << 16)
57 #define PCFG_TPRS_VAL (0x2 << 12)
58 #define PCFG_PAD_VAL 0x2
60 #define PPCFG_TTA 0x1FFFE
61 #define PPCFG_PSSO_EN (1 << 28)
62 #define PPCFG_PSS_EN (1 << 29)
63 #define PPCFG_ESDF_EN (1 << 31)
65 #define PP5C_RIT 0x60216
66 #define PP5C_RCT (0x7f0 << 20)
68 #define PTC_RX_WM_VAL 0x40
69 #define PTC_RSVD (1 << 27)
71 #define PORT0_BASE 0x100
72 #define PORT1_BASE 0x180
74 /* Port Control Register Bit Definitions */
75 #define PORT_SCTL_SPD_GEN3 (0x3 << 4)
76 #define PORT_SCTL_SPD_GEN2 (0x2 << 4)
77 #define PORT_SCTL_SPD_GEN1 (0x1 << 4)
78 #define PORT_SCTL_IPM (0x3 << 8)
80 #define PORT_BASE 0x100
81 #define PORT_OFFSET 0x80
82 #define NR_PORTS 2
83 #define DRV_NAME "ahci-ceva"
84 #define CEVA_FLAG_BROKEN_GEN2 1
86 static unsigned int rx_watermark = PTC_RX_WM_VAL;
87 module_param(rx_watermark, uint, 0644);
88 MODULE_PARM_DESC(rx_watermark, "RxWaterMark value (0 - 0x80)");
90 struct ceva_ahci_priv {
91 struct platform_device *ahci_pdev;
92 /* Port Phy2Cfg Register */
93 u32 pp2c[NR_PORTS];
94 u32 pp3c[NR_PORTS];
95 u32 pp4c[NR_PORTS];
96 u32 pp5c[NR_PORTS];
97 /* Axi Cache Control Register */
98 u32 axicc;
99 bool is_cci_enabled;
100 int flags;
103 static unsigned int ceva_ahci_read_id(struct ata_device *dev,
104 struct ata_taskfile *tf, u16 *id)
106 u32 err_mask;
108 err_mask = ata_do_dev_read_id(dev, tf, id);
109 if (err_mask)
110 return err_mask;
112 * Since CEVA controller does not support device sleep feature, we
113 * need to clear DEVSLP (bit 8) in word78 of the IDENTIFY DEVICE data.
115 id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8));
117 return 0;
120 static struct ata_port_operations ahci_ceva_ops = {
121 .inherits = &ahci_platform_ops,
122 .read_id = ceva_ahci_read_id,
125 static const struct ata_port_info ahci_ceva_port_info = {
126 .flags = AHCI_FLAG_COMMON,
127 .pio_mask = ATA_PIO4,
128 .udma_mask = ATA_UDMA6,
129 .port_ops = &ahci_ceva_ops,
132 static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
134 void __iomem *mmio = hpriv->mmio;
135 struct ceva_ahci_priv *cevapriv = hpriv->plat_data;
136 u32 tmp;
137 int i;
139 /* Set AHCI Enable */
140 tmp = readl(mmio + HOST_CTL);
141 tmp |= HOST_AHCI_EN;
142 writel(tmp, mmio + HOST_CTL);
144 for (i = 0; i < NR_PORTS; i++) {
145 /* TPSS TPRS scalars, CISE and Port Addr */
146 tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
147 writel(tmp, mmio + AHCI_VEND_PCFG);
150 * AXI Data bus width to 64
151 * Set Mem Addr Read, Write ID for data transfers
152 * Set Mem Addr Read ID, Write ID for non-data transfers
153 * Transfer limit to 72 DWord
155 tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD(i) | PAXIC_MARIDD(i) |
156 PAXIC_MAWID(i) | PAXIC_MARID(i) | PAXIC_OTL;
157 writel(tmp, mmio + AHCI_VEND_PAXIC);
159 /* Set AXI cache control register if CCi is enabled */
160 if (cevapriv->is_cci_enabled) {
161 tmp = readl(mmio + AHCI_VEND_AXICC);
162 tmp |= AXICC_ARCA_VAL | AXICC_ARCF_VAL |
163 AXICC_ARCH_VAL | AXICC_ARCP_VAL |
164 AXICC_AWCFD_VAL | AXICC_AWCD_VAL |
165 AXICC_AWCF_VAL;
166 writel(tmp, mmio + AHCI_VEND_AXICC);
169 /* Port Phy Cfg register enables */
170 tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
171 writel(tmp, mmio + AHCI_VEND_PPCFG);
173 /* Phy Control OOB timing parameters COMINIT */
174 writel(cevapriv->pp2c[i], mmio + AHCI_VEND_PP2C);
176 /* Phy Control OOB timing parameters COMWAKE */
177 writel(cevapriv->pp3c[i], mmio + AHCI_VEND_PP3C);
179 /* Phy Control Burst timing setting */
180 writel(cevapriv->pp4c[i], mmio + AHCI_VEND_PP4C);
182 /* Rate Change Timer and Retry Interval Timer setting */
183 writel(cevapriv->pp5c[i], mmio + AHCI_VEND_PP5C);
185 /* Rx Watermark setting */
186 tmp = rx_watermark | PTC_RSVD;
187 writel(tmp, mmio + AHCI_VEND_PTC);
189 /* Default to Gen 3 Speed and Gen 1 if Gen2 is broken */
190 tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
191 if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
192 tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
193 writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
197 static struct scsi_host_template ahci_platform_sht = {
198 AHCI_SHT(DRV_NAME),
201 static int ceva_ahci_probe(struct platform_device *pdev)
203 struct device_node *np = pdev->dev.of_node;
204 struct device *dev = &pdev->dev;
205 struct ahci_host_priv *hpriv;
206 struct ceva_ahci_priv *cevapriv;
207 enum dev_dma_attr attr;
208 int rc;
210 cevapriv = devm_kzalloc(dev, sizeof(*cevapriv), GFP_KERNEL);
211 if (!cevapriv)
212 return -ENOMEM;
214 cevapriv->ahci_pdev = pdev;
216 hpriv = ahci_platform_get_resources(pdev, 0);
217 if (IS_ERR(hpriv))
218 return PTR_ERR(hpriv);
220 rc = ahci_platform_enable_resources(hpriv);
221 if (rc)
222 return rc;
224 if (of_property_read_bool(np, "ceva,broken-gen2"))
225 cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
227 /* Read OOB timing value for COMINIT from device-tree */
228 if (of_property_read_u8_array(np, "ceva,p0-cominit-params",
229 (u8 *)&cevapriv->pp2c[0], 4) < 0) {
230 dev_warn(dev, "ceva,p0-cominit-params property not defined\n");
231 return -EINVAL;
234 if (of_property_read_u8_array(np, "ceva,p1-cominit-params",
235 (u8 *)&cevapriv->pp2c[1], 4) < 0) {
236 dev_warn(dev, "ceva,p1-cominit-params property not defined\n");
237 return -EINVAL;
240 /* Read OOB timing value for COMWAKE from device-tree*/
241 if (of_property_read_u8_array(np, "ceva,p0-comwake-params",
242 (u8 *)&cevapriv->pp3c[0], 4) < 0) {
243 dev_warn(dev, "ceva,p0-comwake-params property not defined\n");
244 return -EINVAL;
247 if (of_property_read_u8_array(np, "ceva,p1-comwake-params",
248 (u8 *)&cevapriv->pp3c[1], 4) < 0) {
249 dev_warn(dev, "ceva,p1-comwake-params property not defined\n");
250 return -EINVAL;
253 /* Read phy BURST timing value from device-tree */
254 if (of_property_read_u8_array(np, "ceva,p0-burst-params",
255 (u8 *)&cevapriv->pp4c[0], 4) < 0) {
256 dev_warn(dev, "ceva,p0-burst-params property not defined\n");
257 return -EINVAL;
260 if (of_property_read_u8_array(np, "ceva,p1-burst-params",
261 (u8 *)&cevapriv->pp4c[1], 4) < 0) {
262 dev_warn(dev, "ceva,p1-burst-params property not defined\n");
263 return -EINVAL;
266 /* Read phy RETRY interval timing value from device-tree */
267 if (of_property_read_u16_array(np, "ceva,p0-retry-params",
268 (u16 *)&cevapriv->pp5c[0], 2) < 0) {
269 dev_warn(dev, "ceva,p0-retry-params property not defined\n");
270 return -EINVAL;
273 if (of_property_read_u16_array(np, "ceva,p1-retry-params",
274 (u16 *)&cevapriv->pp5c[1], 2) < 0) {
275 dev_warn(dev, "ceva,p1-retry-params property not defined\n");
276 return -EINVAL;
280 * Check if CCI is enabled for SATA. The DEV_DMA_COHERENT is returned
281 * if CCI is enabled, so check for DEV_DMA_COHERENT.
283 attr = device_get_dma_attr(dev);
284 cevapriv->is_cci_enabled = (attr == DEV_DMA_COHERENT);
286 hpriv->plat_data = cevapriv;
288 /* CEVA specific initialization */
289 ahci_ceva_setup(hpriv);
291 rc = ahci_platform_init_host(pdev, hpriv, &ahci_ceva_port_info,
292 &ahci_platform_sht);
293 if (rc)
294 goto disable_resources;
296 return 0;
298 disable_resources:
299 ahci_platform_disable_resources(hpriv);
300 return rc;
303 static int __maybe_unused ceva_ahci_suspend(struct device *dev)
305 return ahci_platform_suspend(dev);
308 static int __maybe_unused ceva_ahci_resume(struct device *dev)
310 struct ata_host *host = dev_get_drvdata(dev);
311 struct ahci_host_priv *hpriv = host->private_data;
312 int rc;
314 rc = ahci_platform_enable_resources(hpriv);
315 if (rc)
316 return rc;
318 /* Configure CEVA specific config before resuming HBA */
319 ahci_ceva_setup(hpriv);
321 rc = ahci_platform_resume_host(dev);
322 if (rc)
323 goto disable_resources;
325 /* We resumed so update PM runtime state */
326 pm_runtime_disable(dev);
327 pm_runtime_set_active(dev);
328 pm_runtime_enable(dev);
330 return 0;
332 disable_resources:
333 ahci_platform_disable_resources(hpriv);
335 return rc;
338 static SIMPLE_DEV_PM_OPS(ahci_ceva_pm_ops, ceva_ahci_suspend, ceva_ahci_resume);
340 static const struct of_device_id ceva_ahci_of_match[] = {
341 { .compatible = "ceva,ahci-1v84" },
344 MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
346 static struct platform_driver ceva_ahci_driver = {
347 .probe = ceva_ahci_probe,
348 .remove = ata_platform_remove_one,
349 .driver = {
350 .name = DRV_NAME,
351 .of_match_table = ceva_ahci_of_match,
352 .pm = &ahci_ceva_pm_ops,
355 module_platform_driver(ceva_ahci_driver);
357 MODULE_DESCRIPTION("CEVA AHCI SATA platform driver");
358 MODULE_AUTHOR("Xilinx Inc.");
359 MODULE_LICENSE("GPL v2");