Btrfs: don't consider the missing device when allocating new chunks
[linux/fpc-iii.git] / drivers / usb / misc / sisusbvga / sisusb.h
blob55492a5930bd19c75bb76d77d3d3ba42945e90db
1 /*
2 * sisusb - usb kernel driver for Net2280/SiS315 based USB2VGA dongles
4 * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria
6 * If distributed as part of the Linux kernel, this code is licensed under the
7 * terms of the GPL v2.
9 * Otherwise, the following license terms apply:
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1) Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2) Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3) The name of the author may not be used to endorse or promote products
20 * derived from this software without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
24 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
25 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 * Author: Thomas Winischhofer <thomas@winischhofer.net>
37 #ifndef _SISUSB_H_
38 #define _SISUSB_H_
40 #ifdef CONFIG_COMPAT
41 #define SISUSB_NEW_CONFIG_COMPAT
42 #endif
44 #include <linux/mutex.h>
46 /* For older kernels, support for text consoles is by default
47 * off. To enable text console support, change the following:
49 /* #define CONFIG_USB_SISUSBVGA_CON */
51 /* Version Information */
53 #define SISUSB_VERSION 0
54 #define SISUSB_REVISION 0
55 #define SISUSB_PATCHLEVEL 8
57 /* Include console and mode switching code? */
59 #ifdef CONFIG_USB_SISUSBVGA_CON
60 #define INCL_SISUSB_CON 1
61 #endif
63 #include <linux/console.h>
64 #include <linux/vt_kern.h>
65 #include "sisusb_struct.h"
67 /* USB related */
69 #define SISUSB_MINOR 133 /* official */
71 /* Size of the sisusb input/output buffers */
72 #define SISUSB_IBUF_SIZE 0x01000
73 #define SISUSB_OBUF_SIZE 0x10000 /* fixed */
75 #define NUMOBUFS 8 /* max number of output buffers/output URBs */
77 /* About endianness:
79 * 1) I/O ports, PCI config registers. The read/write()
80 * calls emulate inX/outX. Hence, the data is
81 * expected/delivered in machine endiannes by this
82 * driver.
83 * 2) Video memory. The data is copied 1:1. There is
84 * no swapping. Ever. This means for userland that
85 * the data has to be prepared properly. (Hint:
86 * think graphics data format, command queue,
87 * hardware cursor.)
88 * 3) MMIO. Data is copied 1:1. MMIO must be swapped
89 * properly by userland.
93 #ifdef __BIG_ENDIAN
94 #define SISUSB_CORRECT_ENDIANNESS_PACKET(p) \
95 do { \
96 p->header = cpu_to_le16(p->header); \
97 p->address = cpu_to_le32(p->address); \
98 p->data = cpu_to_le32(p->data); \
99 } while(0)
100 #else
101 #define SISUSB_CORRECT_ENDIANNESS_PACKET(p)
102 #endif
104 struct sisusb_usb_data;
106 struct sisusb_urb_context { /* urb->context for outbound bulk URBs */
107 struct sisusb_usb_data *sisusb;
108 int urbindex;
109 int *actual_length;
112 struct sisusb_usb_data {
113 struct usb_device *sisusb_dev;
114 struct usb_interface *interface;
115 struct kref kref;
116 wait_queue_head_t wait_q; /* for syncind and timeouts */
117 struct mutex lock; /* general race avoidance */
118 unsigned int ifnum; /* interface number of the USB device */
119 int minor; /* minor (for logging clarity) */
120 int isopen; /* !=0 if open */
121 int present; /* !=0 if device is present on the bus */
122 int ready; /* !=0 if device is ready for userland */
123 int numobufs; /* number of obufs = number of out urbs */
124 char *obuf[NUMOBUFS], *ibuf; /* transfer buffers */
125 int obufsize, ibufsize;
126 struct urb *sisurbout[NUMOBUFS];
127 struct urb *sisurbin;
128 unsigned char urbstatus[NUMOBUFS];
129 unsigned char completein;
130 struct sisusb_urb_context urbout_context[NUMOBUFS];
131 unsigned long flagb0;
132 unsigned long vrambase; /* framebuffer base */
133 unsigned int vramsize; /* framebuffer size (bytes) */
134 unsigned long mmiobase;
135 unsigned int mmiosize;
136 unsigned long ioportbase;
137 unsigned char devinit; /* device initialized? */
138 unsigned char gfxinit; /* graphics core initialized? */
139 unsigned short chipid, chipvendor;
140 unsigned short chiprevision;
141 #ifdef INCL_SISUSB_CON
142 struct SiS_Private *SiS_Pr;
143 unsigned long scrbuf;
144 unsigned int scrbuf_size;
145 int haveconsole, con_first, con_last;
146 int havethisconsole[MAX_NR_CONSOLES];
147 int textmodedestroyed;
148 unsigned int sisusb_num_columns; /* real number, not vt's idea */
149 int cur_start_addr, con_rolled_over;
150 int sisusb_cursor_loc, bad_cursor_pos;
151 int sisusb_cursor_size_from;
152 int sisusb_cursor_size_to;
153 int current_font_height, current_font_512;
154 int font_backup_size, font_backup_height, font_backup_512;
155 char *font_backup;
156 int font_slot;
157 struct vc_data *sisusb_display_fg;
158 int is_gfx;
159 int con_blanked;
160 #endif
163 #define to_sisusb_dev(d) container_of(d, struct sisusb_usb_data, kref)
165 /* USB transport related */
167 /* urbstatus */
168 #define SU_URB_BUSY 1
169 #define SU_URB_ALLOC 2
171 /* Endpoints */
173 #define SISUSB_EP_GFX_IN 0x0e /* gfx std packet out(0e)/in(8e) */
174 #define SISUSB_EP_GFX_OUT 0x0e
176 #define SISUSB_EP_GFX_BULK_OUT 0x01 /* gfx mem bulk out/in */
177 #define SISUSB_EP_GFX_BULK_IN 0x02 /* ? 2 is "OUT" ? */
179 #define SISUSB_EP_GFX_LBULK_OUT 0x03 /* gfx large mem bulk out */
181 #define SISUSB_EP_UNKNOWN_04 0x04 /* ? 4 is "OUT" ? - unused */
183 #define SISUSB_EP_BRIDGE_IN 0x0d /* Net2280 out(0d)/in(8d) */
184 #define SISUSB_EP_BRIDGE_OUT 0x0d
186 #define SISUSB_TYPE_MEM 0
187 #define SISUSB_TYPE_IO 1
189 struct sisusb_packet {
190 unsigned short header;
191 u32 address;
192 u32 data;
193 } __attribute__ ((__packed__));
195 #define CLEARPACKET(packet) memset(packet, 0, 10)
197 /* PCI bridge related */
199 #define SISUSB_PCI_MEMBASE 0xd0000000
200 #define SISUSB_PCI_MMIOBASE 0xe4000000
201 #define SISUSB_PCI_IOPORTBASE 0x0000d000
203 #define SISUSB_PCI_PSEUDO_MEMBASE 0x10000000
204 #define SISUSB_PCI_PSEUDO_MMIOBASE 0x20000000
205 #define SISUSB_PCI_PSEUDO_IOPORTBASE 0x0000d000
206 #define SISUSB_PCI_PSEUDO_PCIBASE 0x00010000
208 #define SISUSB_PCI_MMIOSIZE (128*1024)
209 #define SISUSB_PCI_PCONFSIZE 0x5c
211 /* graphics core related */
213 #define AROFFSET 0x40
214 #define ARROFFSET 0x41
215 #define GROFFSET 0x4e
216 #define SROFFSET 0x44
217 #define CROFFSET 0x54
218 #define MISCROFFSET 0x4c
219 #define MISCWOFFSET 0x42
220 #define INPUTSTATOFFSET 0x5A
221 #define PART1OFFSET 0x04
222 #define PART2OFFSET 0x10
223 #define PART3OFFSET 0x12
224 #define PART4OFFSET 0x14
225 #define PART5OFFSET 0x16
226 #define CAPTUREOFFSET 0x00
227 #define VIDEOOFFSET 0x02
228 #define COLREGOFFSET 0x48
229 #define PELMASKOFFSET 0x46
230 #define VGAENABLE 0x43
232 #define SISAR SISUSB_PCI_IOPORTBASE + AROFFSET
233 #define SISARR SISUSB_PCI_IOPORTBASE + ARROFFSET
234 #define SISGR SISUSB_PCI_IOPORTBASE + GROFFSET
235 #define SISSR SISUSB_PCI_IOPORTBASE + SROFFSET
236 #define SISCR SISUSB_PCI_IOPORTBASE + CROFFSET
237 #define SISMISCR SISUSB_PCI_IOPORTBASE + MISCROFFSET
238 #define SISMISCW SISUSB_PCI_IOPORTBASE + MISCWOFFSET
239 #define SISINPSTAT SISUSB_PCI_IOPORTBASE + INPUTSTATOFFSET
240 #define SISPART1 SISUSB_PCI_IOPORTBASE + PART1OFFSET
241 #define SISPART2 SISUSB_PCI_IOPORTBASE + PART2OFFSET
242 #define SISPART3 SISUSB_PCI_IOPORTBASE + PART3OFFSET
243 #define SISPART4 SISUSB_PCI_IOPORTBASE + PART4OFFSET
244 #define SISPART5 SISUSB_PCI_IOPORTBASE + PART5OFFSET
245 #define SISCAP SISUSB_PCI_IOPORTBASE + CAPTUREOFFSET
246 #define SISVID SISUSB_PCI_IOPORTBASE + VIDEOOFFSET
247 #define SISCOLIDXR SISUSB_PCI_IOPORTBASE + COLREGOFFSET - 1
248 #define SISCOLIDX SISUSB_PCI_IOPORTBASE + COLREGOFFSET
249 #define SISCOLDATA SISUSB_PCI_IOPORTBASE + COLREGOFFSET + 1
250 #define SISCOL2IDX SISPART5
251 #define SISCOL2DATA SISPART5 + 1
252 #define SISPEL SISUSB_PCI_IOPORTBASE + PELMASKOFFSET
253 #define SISVGAEN SISUSB_PCI_IOPORTBASE + VGAENABLE
254 #define SISDACA SISCOLIDX
255 #define SISDACD SISCOLDATA
257 /* ioctl related */
259 /* Structure argument for SISUSB_GET_INFO ioctl */
260 struct sisusb_info {
261 __u32 sisusb_id; /* for identifying sisusb */
262 #define SISUSB_ID 0x53495355 /* Identify myself with 'SISU' */
263 __u8 sisusb_version;
264 __u8 sisusb_revision;
265 __u8 sisusb_patchlevel;
266 __u8 sisusb_gfxinit; /* graphics core initialized? */
268 __u32 sisusb_vrambase;
269 __u32 sisusb_mmiobase;
270 __u32 sisusb_iobase;
271 __u32 sisusb_pcibase;
273 __u32 sisusb_vramsize; /* framebuffer size in bytes */
275 __u32 sisusb_minor;
277 __u32 sisusb_fbdevactive; /* != 0 if framebuffer device active */
279 __u32 sisusb_conactive; /* != 0 if console driver active */
281 __u8 sisusb_reserved[28]; /* for future use */
284 struct sisusb_command {
285 __u8 operation; /* see below */
286 __u8 data0; /* operation dependent */
287 __u8 data1; /* operation dependent */
288 __u8 data2; /* operation dependent */
289 __u32 data3; /* operation dependent */
290 __u32 data4; /* for future use */
293 #define SUCMD_GET 0x01 /* for all: data0 = index, data3 = port */
294 #define SUCMD_SET 0x02 /* data1 = value */
295 #define SUCMD_SETOR 0x03 /* data1 = or */
296 #define SUCMD_SETAND 0x04 /* data1 = and */
297 #define SUCMD_SETANDOR 0x05 /* data1 = and, data2 = or */
298 #define SUCMD_SETMASK 0x06 /* data1 = data, data2 = mask */
300 #define SUCMD_CLRSCR 0x07 /* data0:1:2 = length, data3 = address */
302 #define SUCMD_HANDLETEXTMODE 0x08 /* Reset/destroy text mode */
304 #define SUCMD_SETMODE 0x09 /* Set a display mode (data3 = SiS mode) */
305 #define SUCMD_SETVESAMODE 0x0a /* Set a display mode (data3 = VESA mode) */
307 #define SISUSB_COMMAND _IOWR(0xF3,0x3D,struct sisusb_command)
308 #define SISUSB_GET_CONFIG_SIZE _IOR(0xF3,0x3E,__u32)
309 #define SISUSB_GET_CONFIG _IOR(0xF3,0x3F,struct sisusb_info)
311 #endif /* SISUSB_H */