2 tristate "SoC Audio for the Texas Instruments OMAP chips"
3 depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST)
4 select SND_DMAENGINE_PCM
6 config SND_OMAP_SOC_DMIC
9 config SND_OMAP_SOC_MCBSP
12 config SND_OMAP_SOC_MCPDM
15 config SND_OMAP_SOC_HDMI_AUDIO
16 tristate "HDMI audio support for OMAP4+ based SoCs"
17 depends on SND_OMAP_SOC
19 For HDMI audio to work OMAPDSS HDMI support should be
21 The hdmi audio driver implements cpu-dai component using the
22 callbacks provided by OMAPDSS and registers the component
23 under DSS HDMI device. Omap-pcm is registered for platform
24 component also under DSS HDMI device. Dummy codec is used as
25 as codec component. The hdmi audio driver implements also
26 the card and registers it under its own platform device.
27 The device for the driver is registered by OMAPDSS hdmi
30 config SND_OMAP_SOC_N810
31 tristate "SoC Audio support for Nokia N810"
32 depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
34 select SND_OMAP_SOC_MCBSP
35 select SND_SOC_TLV320AIC3X
37 Say Y if you want to add support for SoC audio on Nokia N810.
39 config SND_OMAP_SOC_RX51
40 tristate "SoC Audio support for Nokia N900 (RX-51)"
41 depends on SND_OMAP_SOC && ARM && I2C
42 select SND_OMAP_SOC_MCBSP
43 select SND_SOC_TLV320AIC3X
44 select SND_SOC_TPA6130A2
47 Say Y if you want to add support for SoC audio on Nokia N900
50 config SND_OMAP_SOC_AMS_DELTA
51 tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
52 depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY
53 select SND_OMAP_SOC_MCBSP
54 select SND_SOC_CX20442
56 Say Y if you want to add support for SoC audio device connected to
57 a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
59 Note that in order to get those devices fully supported, you have to
60 build the kernel with standard serial port driver included and
61 configured for at least 4 ports. Then, from userspace, you must load
62 a line discipline #19 on the modem (ttyS3) serial line. The simplest
63 way to achieve this is to install util-linux-ng and use the included
64 ldattach utility. This can be started automatically from udev,
65 a simple rule like this one should do the trick (it does for me):
66 ACTION=="add", KERNEL=="controlC0", \
67 RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
69 config SND_OMAP_SOC_OSK5912
70 tristate "SoC Audio support for omap osk5912"
71 depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
72 select SND_OMAP_SOC_MCBSP
73 select SND_SOC_TLV320AIC23_I2C
75 Say Y if you want to add support for SoC audio on osk5912.
77 config SND_OMAP_SOC_AM3517EVM
78 tristate "SoC Audio support for OMAP3517 / AM3517 EVM"
79 depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C
80 select SND_OMAP_SOC_MCBSP
81 select SND_SOC_TLV320AIC23_I2C
83 Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517
86 config SND_OMAP_SOC_OMAP_TWL4030
87 tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
88 depends on TWL4030_CORE && SND_OMAP_SOC
89 select SND_OMAP_SOC_MCBSP
90 select SND_SOC_TWL4030
92 Say Y if you want to add support for SoC audio on TI SoC based boards
93 using twl4030 as c codec. This driver currently supports:
94 - Beagleboard or Devkit8000
95 - Gumstix Overo or CompuLab CM-T35/CM-T3730
101 config SND_OMAP_SOC_OMAP_ABE_TWL6040
102 tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
103 depends on TWL6040_CORE && SND_OMAP_SOC
104 depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
105 select SND_OMAP_SOC_DMIC
106 select SND_OMAP_SOC_MCPDM
107 select SND_SOC_TWL6040
109 select COMMON_CLK_PALMAS if (SOC_OMAP5 && MFD_PALMAS)
111 Say Y if you want to add support for SoC audio on OMAP boards using
112 ABE and twl6040 codec. This driver currently supports:
113 - SDP4430/Blaze boards
115 - PandaBoardES (4460)
118 config SND_OMAP_SOC_OMAP3_PANDORA
119 tristate "SoC Audio support for OMAP3 Pandora"
120 depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
121 select SND_OMAP_SOC_MCBSP
122 select SND_SOC_TWL4030
124 Say Y if you want to add support for SoC audio on the OMAP3 Pandora.