jbd: Journal block numbers can ever be only 32-bit use unsigned int for them
[linux/fpc-iii.git] / fs / ocfs2 / file.c
blob221c5e98957b59212e9ad21314bd3645c2f4fbc9
1 /* -*- mode: c; c-basic-offset: 8; -*-
2 * vim: noexpandtab sw=8 ts=8 sts=0:
4 * file.c
6 * File open, close, extend, truncate
8 * Copyright (C) 2002, 2004 Oracle. All rights reserved.
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public
12 * License as published by the Free Software Foundation; either
13 * version 2 of the License, or (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 * General Public License for more details.
20 * You should have received a copy of the GNU General Public
21 * License along with this program; if not, write to the
22 * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
23 * Boston, MA 021110-1307, USA.
26 #include <linux/capability.h>
27 #include <linux/fs.h>
28 #include <linux/types.h>
29 #include <linux/slab.h>
30 #include <linux/highmem.h>
31 #include <linux/pagemap.h>
32 #include <linux/uio.h>
33 #include <linux/sched.h>
34 #include <linux/splice.h>
35 #include <linux/mount.h>
36 #include <linux/writeback.h>
37 #include <linux/falloc.h>
38 #include <linux/quotaops.h>
40 #define MLOG_MASK_PREFIX ML_INODE
41 #include <cluster/masklog.h>
43 #include "ocfs2.h"
45 #include "alloc.h"
46 #include "aops.h"
47 #include "dir.h"
48 #include "dlmglue.h"
49 #include "extent_map.h"
50 #include "file.h"
51 #include "sysfile.h"
52 #include "inode.h"
53 #include "ioctl.h"
54 #include "journal.h"
55 #include "locks.h"
56 #include "mmap.h"
57 #include "suballoc.h"
58 #include "super.h"
59 #include "xattr.h"
60 #include "acl.h"
61 #include "quota.h"
63 #include "buffer_head_io.h"
65 static int ocfs2_sync_inode(struct inode *inode)
67 filemap_fdatawrite(inode->i_mapping);
68 return sync_mapping_buffers(inode->i_mapping);
71 static int ocfs2_init_file_private(struct inode *inode, struct file *file)
73 struct ocfs2_file_private *fp;
75 fp = kzalloc(sizeof(struct ocfs2_file_private), GFP_KERNEL);
76 if (!fp)
77 return -ENOMEM;
79 fp->fp_file = file;
80 mutex_init(&fp->fp_mutex);
81 ocfs2_file_lock_res_init(&fp->fp_flock, fp);
82 file->private_data = fp;
84 return 0;
87 static void ocfs2_free_file_private(struct inode *inode, struct file *file)
89 struct ocfs2_file_private *fp = file->private_data;
90 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
92 if (fp) {
93 ocfs2_simple_drop_lockres(osb, &fp->fp_flock);
94 ocfs2_lock_res_free(&fp->fp_flock);
95 kfree(fp);
96 file->private_data = NULL;
100 static int ocfs2_file_open(struct inode *inode, struct file *file)
102 int status;
103 int mode = file->f_flags;
104 struct ocfs2_inode_info *oi = OCFS2_I(inode);
106 mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
107 file->f_path.dentry->d_name.len, file->f_path.dentry->d_name.name);
109 spin_lock(&oi->ip_lock);
111 /* Check that the inode hasn't been wiped from disk by another
112 * node. If it hasn't then we're safe as long as we hold the
113 * spin lock until our increment of open count. */
114 if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_DELETED) {
115 spin_unlock(&oi->ip_lock);
117 status = -ENOENT;
118 goto leave;
121 if (mode & O_DIRECT)
122 oi->ip_flags |= OCFS2_INODE_OPEN_DIRECT;
124 oi->ip_open_count++;
125 spin_unlock(&oi->ip_lock);
127 status = ocfs2_init_file_private(inode, file);
128 if (status) {
130 * We want to set open count back if we're failing the
131 * open.
133 spin_lock(&oi->ip_lock);
134 oi->ip_open_count--;
135 spin_unlock(&oi->ip_lock);
138 leave:
139 mlog_exit(status);
140 return status;
143 static int ocfs2_file_release(struct inode *inode, struct file *file)
145 struct ocfs2_inode_info *oi = OCFS2_I(inode);
147 mlog_entry("(0x%p, 0x%p, '%.*s')\n", inode, file,
148 file->f_path.dentry->d_name.len,
149 file->f_path.dentry->d_name.name);
151 spin_lock(&oi->ip_lock);
152 if (!--oi->ip_open_count)
153 oi->ip_flags &= ~OCFS2_INODE_OPEN_DIRECT;
154 spin_unlock(&oi->ip_lock);
156 ocfs2_free_file_private(inode, file);
158 mlog_exit(0);
160 return 0;
163 static int ocfs2_dir_open(struct inode *inode, struct file *file)
165 return ocfs2_init_file_private(inode, file);
168 static int ocfs2_dir_release(struct inode *inode, struct file *file)
170 ocfs2_free_file_private(inode, file);
171 return 0;
174 static int ocfs2_sync_file(struct file *file,
175 struct dentry *dentry,
176 int datasync)
178 int err = 0;
179 journal_t *journal;
180 struct inode *inode = dentry->d_inode;
181 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
183 mlog_entry("(0x%p, 0x%p, %d, '%.*s')\n", file, dentry, datasync,
184 dentry->d_name.len, dentry->d_name.name);
186 err = ocfs2_sync_inode(dentry->d_inode);
187 if (err)
188 goto bail;
190 if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
191 goto bail;
193 journal = osb->journal->j_journal;
194 err = jbd2_journal_force_commit(journal);
196 bail:
197 mlog_exit(err);
199 return (err < 0) ? -EIO : 0;
202 int ocfs2_should_update_atime(struct inode *inode,
203 struct vfsmount *vfsmnt)
205 struct timespec now;
206 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
208 if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
209 return 0;
211 if ((inode->i_flags & S_NOATIME) ||
212 ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode)))
213 return 0;
216 * We can be called with no vfsmnt structure - NFSD will
217 * sometimes do this.
219 * Note that our action here is different than touch_atime() -
220 * if we can't tell whether this is a noatime mount, then we
221 * don't know whether to trust the value of s_atime_quantum.
223 if (vfsmnt == NULL)
224 return 0;
226 if ((vfsmnt->mnt_flags & MNT_NOATIME) ||
227 ((vfsmnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)))
228 return 0;
230 if (vfsmnt->mnt_flags & MNT_RELATIME) {
231 if ((timespec_compare(&inode->i_atime, &inode->i_mtime) <= 0) ||
232 (timespec_compare(&inode->i_atime, &inode->i_ctime) <= 0))
233 return 1;
235 return 0;
238 now = CURRENT_TIME;
239 if ((now.tv_sec - inode->i_atime.tv_sec <= osb->s_atime_quantum))
240 return 0;
241 else
242 return 1;
245 int ocfs2_update_inode_atime(struct inode *inode,
246 struct buffer_head *bh)
248 int ret;
249 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
250 handle_t *handle;
251 struct ocfs2_dinode *di = (struct ocfs2_dinode *) bh->b_data;
253 mlog_entry_void();
255 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
256 if (IS_ERR(handle)) {
257 ret = PTR_ERR(handle);
258 mlog_errno(ret);
259 goto out;
262 ret = ocfs2_journal_access_di(handle, inode, bh,
263 OCFS2_JOURNAL_ACCESS_WRITE);
264 if (ret) {
265 mlog_errno(ret);
266 goto out_commit;
270 * Don't use ocfs2_mark_inode_dirty() here as we don't always
271 * have i_mutex to guard against concurrent changes to other
272 * inode fields.
274 inode->i_atime = CURRENT_TIME;
275 di->i_atime = cpu_to_le64(inode->i_atime.tv_sec);
276 di->i_atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec);
278 ret = ocfs2_journal_dirty(handle, bh);
279 if (ret < 0)
280 mlog_errno(ret);
282 out_commit:
283 ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
284 out:
285 mlog_exit(ret);
286 return ret;
289 static int ocfs2_set_inode_size(handle_t *handle,
290 struct inode *inode,
291 struct buffer_head *fe_bh,
292 u64 new_i_size)
294 int status;
296 mlog_entry_void();
297 i_size_write(inode, new_i_size);
298 inode->i_blocks = ocfs2_inode_sector_count(inode);
299 inode->i_ctime = inode->i_mtime = CURRENT_TIME;
301 status = ocfs2_mark_inode_dirty(handle, inode, fe_bh);
302 if (status < 0) {
303 mlog_errno(status);
304 goto bail;
307 bail:
308 mlog_exit(status);
309 return status;
312 int ocfs2_simple_size_update(struct inode *inode,
313 struct buffer_head *di_bh,
314 u64 new_i_size)
316 int ret;
317 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
318 handle_t *handle = NULL;
320 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
321 if (IS_ERR(handle)) {
322 ret = PTR_ERR(handle);
323 mlog_errno(ret);
324 goto out;
327 ret = ocfs2_set_inode_size(handle, inode, di_bh,
328 new_i_size);
329 if (ret < 0)
330 mlog_errno(ret);
332 ocfs2_commit_trans(osb, handle);
333 out:
334 return ret;
337 static int ocfs2_orphan_for_truncate(struct ocfs2_super *osb,
338 struct inode *inode,
339 struct buffer_head *fe_bh,
340 u64 new_i_size)
342 int status;
343 handle_t *handle;
344 struct ocfs2_dinode *di;
345 u64 cluster_bytes;
347 mlog_entry_void();
349 /* TODO: This needs to actually orphan the inode in this
350 * transaction. */
352 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
353 if (IS_ERR(handle)) {
354 status = PTR_ERR(handle);
355 mlog_errno(status);
356 goto out;
359 status = ocfs2_journal_access_di(handle, inode, fe_bh,
360 OCFS2_JOURNAL_ACCESS_WRITE);
361 if (status < 0) {
362 mlog_errno(status);
363 goto out_commit;
367 * Do this before setting i_size.
369 cluster_bytes = ocfs2_align_bytes_to_clusters(inode->i_sb, new_i_size);
370 status = ocfs2_zero_range_for_truncate(inode, handle, new_i_size,
371 cluster_bytes);
372 if (status) {
373 mlog_errno(status);
374 goto out_commit;
377 i_size_write(inode, new_i_size);
378 inode->i_ctime = inode->i_mtime = CURRENT_TIME;
380 di = (struct ocfs2_dinode *) fe_bh->b_data;
381 di->i_size = cpu_to_le64(new_i_size);
382 di->i_ctime = di->i_mtime = cpu_to_le64(inode->i_ctime.tv_sec);
383 di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec);
385 status = ocfs2_journal_dirty(handle, fe_bh);
386 if (status < 0)
387 mlog_errno(status);
389 out_commit:
390 ocfs2_commit_trans(osb, handle);
391 out:
393 mlog_exit(status);
394 return status;
397 static int ocfs2_truncate_file(struct inode *inode,
398 struct buffer_head *di_bh,
399 u64 new_i_size)
401 int status = 0;
402 struct ocfs2_dinode *fe = NULL;
403 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
404 struct ocfs2_truncate_context *tc = NULL;
406 mlog_entry("(inode = %llu, new_i_size = %llu\n",
407 (unsigned long long)OCFS2_I(inode)->ip_blkno,
408 (unsigned long long)new_i_size);
410 /* We trust di_bh because it comes from ocfs2_inode_lock(), which
411 * already validated it */
412 fe = (struct ocfs2_dinode *) di_bh->b_data;
414 mlog_bug_on_msg(le64_to_cpu(fe->i_size) != i_size_read(inode),
415 "Inode %llu, inode i_size = %lld != di "
416 "i_size = %llu, i_flags = 0x%x\n",
417 (unsigned long long)OCFS2_I(inode)->ip_blkno,
418 i_size_read(inode),
419 (unsigned long long)le64_to_cpu(fe->i_size),
420 le32_to_cpu(fe->i_flags));
422 if (new_i_size > le64_to_cpu(fe->i_size)) {
423 mlog(0, "asked to truncate file with size (%llu) to size (%llu)!\n",
424 (unsigned long long)le64_to_cpu(fe->i_size),
425 (unsigned long long)new_i_size);
426 status = -EINVAL;
427 mlog_errno(status);
428 goto bail;
431 mlog(0, "inode %llu, i_size = %llu, new_i_size = %llu\n",
432 (unsigned long long)le64_to_cpu(fe->i_blkno),
433 (unsigned long long)le64_to_cpu(fe->i_size),
434 (unsigned long long)new_i_size);
436 /* lets handle the simple truncate cases before doing any more
437 * cluster locking. */
438 if (new_i_size == le64_to_cpu(fe->i_size))
439 goto bail;
441 down_write(&OCFS2_I(inode)->ip_alloc_sem);
444 * The inode lock forced other nodes to sync and drop their
445 * pages, which (correctly) happens even if we have a truncate
446 * without allocation change - ocfs2 cluster sizes can be much
447 * greater than page size, so we have to truncate them
448 * anyway.
450 unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1);
451 truncate_inode_pages(inode->i_mapping, new_i_size);
453 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
454 status = ocfs2_truncate_inline(inode, di_bh, new_i_size,
455 i_size_read(inode), 1);
456 if (status)
457 mlog_errno(status);
459 goto bail_unlock_sem;
462 /* alright, we're going to need to do a full blown alloc size
463 * change. Orphan the inode so that recovery can complete the
464 * truncate if necessary. This does the task of marking
465 * i_size. */
466 status = ocfs2_orphan_for_truncate(osb, inode, di_bh, new_i_size);
467 if (status < 0) {
468 mlog_errno(status);
469 goto bail_unlock_sem;
472 status = ocfs2_prepare_truncate(osb, inode, di_bh, &tc);
473 if (status < 0) {
474 mlog_errno(status);
475 goto bail_unlock_sem;
478 status = ocfs2_commit_truncate(osb, inode, di_bh, tc);
479 if (status < 0) {
480 mlog_errno(status);
481 goto bail_unlock_sem;
484 /* TODO: orphan dir cleanup here. */
485 bail_unlock_sem:
486 up_write(&OCFS2_I(inode)->ip_alloc_sem);
488 bail:
490 mlog_exit(status);
491 return status;
495 * extend file allocation only here.
496 * we'll update all the disk stuff, and oip->alloc_size
498 * expect stuff to be locked, a transaction started and enough data /
499 * metadata reservations in the contexts.
501 * Will return -EAGAIN, and a reason if a restart is needed.
502 * If passed in, *reason will always be set, even in error.
504 int ocfs2_add_inode_data(struct ocfs2_super *osb,
505 struct inode *inode,
506 u32 *logical_offset,
507 u32 clusters_to_add,
508 int mark_unwritten,
509 struct buffer_head *fe_bh,
510 handle_t *handle,
511 struct ocfs2_alloc_context *data_ac,
512 struct ocfs2_alloc_context *meta_ac,
513 enum ocfs2_alloc_restarted *reason_ret)
515 int ret;
516 struct ocfs2_extent_tree et;
518 ocfs2_init_dinode_extent_tree(&et, inode, fe_bh);
519 ret = ocfs2_add_clusters_in_btree(osb, inode, logical_offset,
520 clusters_to_add, mark_unwritten,
521 &et, handle,
522 data_ac, meta_ac, reason_ret);
524 return ret;
527 static int __ocfs2_extend_allocation(struct inode *inode, u32 logical_start,
528 u32 clusters_to_add, int mark_unwritten)
530 int status = 0;
531 int restart_func = 0;
532 int credits;
533 u32 prev_clusters;
534 struct buffer_head *bh = NULL;
535 struct ocfs2_dinode *fe = NULL;
536 handle_t *handle = NULL;
537 struct ocfs2_alloc_context *data_ac = NULL;
538 struct ocfs2_alloc_context *meta_ac = NULL;
539 enum ocfs2_alloc_restarted why;
540 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
541 struct ocfs2_extent_tree et;
542 int did_quota = 0;
544 mlog_entry("(clusters_to_add = %u)\n", clusters_to_add);
547 * This function only exists for file systems which don't
548 * support holes.
550 BUG_ON(mark_unwritten && !ocfs2_sparse_alloc(osb));
552 status = ocfs2_read_inode_block(inode, &bh);
553 if (status < 0) {
554 mlog_errno(status);
555 goto leave;
557 fe = (struct ocfs2_dinode *) bh->b_data;
559 restart_all:
560 BUG_ON(le32_to_cpu(fe->i_clusters) != OCFS2_I(inode)->ip_clusters);
562 mlog(0, "extend inode %llu, i_size = %lld, di->i_clusters = %u, "
563 "clusters_to_add = %u\n",
564 (unsigned long long)OCFS2_I(inode)->ip_blkno,
565 (long long)i_size_read(inode), le32_to_cpu(fe->i_clusters),
566 clusters_to_add);
567 ocfs2_init_dinode_extent_tree(&et, inode, bh);
568 status = ocfs2_lock_allocators(inode, &et, clusters_to_add, 0,
569 &data_ac, &meta_ac);
570 if (status) {
571 mlog_errno(status);
572 goto leave;
575 credits = ocfs2_calc_extend_credits(osb->sb, &fe->id2.i_list,
576 clusters_to_add);
577 handle = ocfs2_start_trans(osb, credits);
578 if (IS_ERR(handle)) {
579 status = PTR_ERR(handle);
580 handle = NULL;
581 mlog_errno(status);
582 goto leave;
585 restarted_transaction:
586 if (vfs_dq_alloc_space_nodirty(inode, ocfs2_clusters_to_bytes(osb->sb,
587 clusters_to_add))) {
588 status = -EDQUOT;
589 goto leave;
591 did_quota = 1;
593 /* reserve a write to the file entry early on - that we if we
594 * run out of credits in the allocation path, we can still
595 * update i_size. */
596 status = ocfs2_journal_access_di(handle, inode, bh,
597 OCFS2_JOURNAL_ACCESS_WRITE);
598 if (status < 0) {
599 mlog_errno(status);
600 goto leave;
603 prev_clusters = OCFS2_I(inode)->ip_clusters;
605 status = ocfs2_add_inode_data(osb,
606 inode,
607 &logical_start,
608 clusters_to_add,
609 mark_unwritten,
611 handle,
612 data_ac,
613 meta_ac,
614 &why);
615 if ((status < 0) && (status != -EAGAIN)) {
616 if (status != -ENOSPC)
617 mlog_errno(status);
618 goto leave;
621 status = ocfs2_journal_dirty(handle, bh);
622 if (status < 0) {
623 mlog_errno(status);
624 goto leave;
627 spin_lock(&OCFS2_I(inode)->ip_lock);
628 clusters_to_add -= (OCFS2_I(inode)->ip_clusters - prev_clusters);
629 spin_unlock(&OCFS2_I(inode)->ip_lock);
630 /* Release unused quota reservation */
631 vfs_dq_free_space(inode,
632 ocfs2_clusters_to_bytes(osb->sb, clusters_to_add));
633 did_quota = 0;
635 if (why != RESTART_NONE && clusters_to_add) {
636 if (why == RESTART_META) {
637 mlog(0, "restarting function.\n");
638 restart_func = 1;
639 } else {
640 BUG_ON(why != RESTART_TRANS);
642 mlog(0, "restarting transaction.\n");
643 /* TODO: This can be more intelligent. */
644 credits = ocfs2_calc_extend_credits(osb->sb,
645 &fe->id2.i_list,
646 clusters_to_add);
647 status = ocfs2_extend_trans(handle, credits);
648 if (status < 0) {
649 /* handle still has to be committed at
650 * this point. */
651 status = -ENOMEM;
652 mlog_errno(status);
653 goto leave;
655 goto restarted_transaction;
659 mlog(0, "fe: i_clusters = %u, i_size=%llu\n",
660 le32_to_cpu(fe->i_clusters),
661 (unsigned long long)le64_to_cpu(fe->i_size));
662 mlog(0, "inode: ip_clusters=%u, i_size=%lld\n",
663 OCFS2_I(inode)->ip_clusters, (long long)i_size_read(inode));
665 leave:
666 if (status < 0 && did_quota)
667 vfs_dq_free_space(inode,
668 ocfs2_clusters_to_bytes(osb->sb, clusters_to_add));
669 if (handle) {
670 ocfs2_commit_trans(osb, handle);
671 handle = NULL;
673 if (data_ac) {
674 ocfs2_free_alloc_context(data_ac);
675 data_ac = NULL;
677 if (meta_ac) {
678 ocfs2_free_alloc_context(meta_ac);
679 meta_ac = NULL;
681 if ((!status) && restart_func) {
682 restart_func = 0;
683 goto restart_all;
685 brelse(bh);
686 bh = NULL;
688 mlog_exit(status);
689 return status;
692 /* Some parts of this taken from generic_cont_expand, which turned out
693 * to be too fragile to do exactly what we need without us having to
694 * worry about recursive locking in ->write_begin() and ->write_end(). */
695 static int ocfs2_write_zero_page(struct inode *inode,
696 u64 size)
698 struct address_space *mapping = inode->i_mapping;
699 struct page *page;
700 unsigned long index;
701 unsigned int offset;
702 handle_t *handle = NULL;
703 int ret;
705 offset = (size & (PAGE_CACHE_SIZE-1)); /* Within page */
706 /* ugh. in prepare/commit_write, if from==to==start of block, we
707 ** skip the prepare. make sure we never send an offset for the start
708 ** of a block
710 if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) {
711 offset++;
713 index = size >> PAGE_CACHE_SHIFT;
715 page = grab_cache_page(mapping, index);
716 if (!page) {
717 ret = -ENOMEM;
718 mlog_errno(ret);
719 goto out;
722 ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
723 if (ret < 0) {
724 mlog_errno(ret);
725 goto out_unlock;
728 if (ocfs2_should_order_data(inode)) {
729 handle = ocfs2_start_walk_page_trans(inode, page, offset,
730 offset);
731 if (IS_ERR(handle)) {
732 ret = PTR_ERR(handle);
733 handle = NULL;
734 goto out_unlock;
738 /* must not update i_size! */
739 ret = block_commit_write(page, offset, offset);
740 if (ret < 0)
741 mlog_errno(ret);
742 else
743 ret = 0;
745 if (handle)
746 ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
747 out_unlock:
748 unlock_page(page);
749 page_cache_release(page);
750 out:
751 return ret;
754 static int ocfs2_zero_extend(struct inode *inode,
755 u64 zero_to_size)
757 int ret = 0;
758 u64 start_off;
759 struct super_block *sb = inode->i_sb;
761 start_off = ocfs2_align_bytes_to_blocks(sb, i_size_read(inode));
762 while (start_off < zero_to_size) {
763 ret = ocfs2_write_zero_page(inode, start_off);
764 if (ret < 0) {
765 mlog_errno(ret);
766 goto out;
769 start_off += sb->s_blocksize;
772 * Very large extends have the potential to lock up
773 * the cpu for extended periods of time.
775 cond_resched();
778 out:
779 return ret;
782 int ocfs2_extend_no_holes(struct inode *inode, u64 new_i_size, u64 zero_to)
784 int ret;
785 u32 clusters_to_add;
786 struct ocfs2_inode_info *oi = OCFS2_I(inode);
788 clusters_to_add = ocfs2_clusters_for_bytes(inode->i_sb, new_i_size);
789 if (clusters_to_add < oi->ip_clusters)
790 clusters_to_add = 0;
791 else
792 clusters_to_add -= oi->ip_clusters;
794 if (clusters_to_add) {
795 ret = __ocfs2_extend_allocation(inode, oi->ip_clusters,
796 clusters_to_add, 0);
797 if (ret) {
798 mlog_errno(ret);
799 goto out;
804 * Call this even if we don't add any clusters to the tree. We
805 * still need to zero the area between the old i_size and the
806 * new i_size.
808 ret = ocfs2_zero_extend(inode, zero_to);
809 if (ret < 0)
810 mlog_errno(ret);
812 out:
813 return ret;
816 static int ocfs2_extend_file(struct inode *inode,
817 struct buffer_head *di_bh,
818 u64 new_i_size)
820 int ret = 0;
821 struct ocfs2_inode_info *oi = OCFS2_I(inode);
823 BUG_ON(!di_bh);
825 /* setattr sometimes calls us like this. */
826 if (new_i_size == 0)
827 goto out;
829 if (i_size_read(inode) == new_i_size)
830 goto out;
831 BUG_ON(new_i_size < i_size_read(inode));
834 * Fall through for converting inline data, even if the fs
835 * supports sparse files.
837 * The check for inline data here is legal - nobody can add
838 * the feature since we have i_mutex. We must check it again
839 * after acquiring ip_alloc_sem though, as paths like mmap
840 * might have raced us to converting the inode to extents.
842 if (!(oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
843 && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
844 goto out_update_size;
847 * The alloc sem blocks people in read/write from reading our
848 * allocation until we're done changing it. We depend on
849 * i_mutex to block other extend/truncate calls while we're
850 * here.
852 down_write(&oi->ip_alloc_sem);
854 if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
856 * We can optimize small extends by keeping the inodes
857 * inline data.
859 if (ocfs2_size_fits_inline_data(di_bh, new_i_size)) {
860 up_write(&oi->ip_alloc_sem);
861 goto out_update_size;
864 ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
865 if (ret) {
866 up_write(&oi->ip_alloc_sem);
868 mlog_errno(ret);
869 goto out;
873 if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
874 ret = ocfs2_extend_no_holes(inode, new_i_size, new_i_size);
876 up_write(&oi->ip_alloc_sem);
878 if (ret < 0) {
879 mlog_errno(ret);
880 goto out;
883 out_update_size:
884 ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
885 if (ret < 0)
886 mlog_errno(ret);
888 out:
889 return ret;
892 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
894 int status = 0, size_change;
895 struct inode *inode = dentry->d_inode;
896 struct super_block *sb = inode->i_sb;
897 struct ocfs2_super *osb = OCFS2_SB(sb);
898 struct buffer_head *bh = NULL;
899 handle_t *handle = NULL;
900 int qtype;
901 struct dquot *transfer_from[MAXQUOTAS] = { };
902 struct dquot *transfer_to[MAXQUOTAS] = { };
904 mlog_entry("(0x%p, '%.*s')\n", dentry,
905 dentry->d_name.len, dentry->d_name.name);
907 /* ensuring we don't even attempt to truncate a symlink */
908 if (S_ISLNK(inode->i_mode))
909 attr->ia_valid &= ~ATTR_SIZE;
911 if (attr->ia_valid & ATTR_MODE)
912 mlog(0, "mode change: %d\n", attr->ia_mode);
913 if (attr->ia_valid & ATTR_UID)
914 mlog(0, "uid change: %d\n", attr->ia_uid);
915 if (attr->ia_valid & ATTR_GID)
916 mlog(0, "gid change: %d\n", attr->ia_gid);
917 if (attr->ia_valid & ATTR_SIZE)
918 mlog(0, "size change...\n");
919 if (attr->ia_valid & (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME))
920 mlog(0, "time change...\n");
922 #define OCFS2_VALID_ATTRS (ATTR_ATIME | ATTR_MTIME | ATTR_CTIME | ATTR_SIZE \
923 | ATTR_GID | ATTR_UID | ATTR_MODE)
924 if (!(attr->ia_valid & OCFS2_VALID_ATTRS)) {
925 mlog(0, "can't handle attrs: 0x%x\n", attr->ia_valid);
926 return 0;
929 status = inode_change_ok(inode, attr);
930 if (status)
931 return status;
933 size_change = S_ISREG(inode->i_mode) && attr->ia_valid & ATTR_SIZE;
934 if (size_change) {
935 status = ocfs2_rw_lock(inode, 1);
936 if (status < 0) {
937 mlog_errno(status);
938 goto bail;
942 status = ocfs2_inode_lock(inode, &bh, 1);
943 if (status < 0) {
944 if (status != -ENOENT)
945 mlog_errno(status);
946 goto bail_unlock_rw;
949 if (size_change && attr->ia_size != i_size_read(inode)) {
950 if (attr->ia_size > sb->s_maxbytes) {
951 status = -EFBIG;
952 goto bail_unlock;
955 if (i_size_read(inode) > attr->ia_size) {
956 if (ocfs2_should_order_data(inode)) {
957 status = ocfs2_begin_ordered_truncate(inode,
958 attr->ia_size);
959 if (status)
960 goto bail_unlock;
962 status = ocfs2_truncate_file(inode, bh, attr->ia_size);
963 } else
964 status = ocfs2_extend_file(inode, bh, attr->ia_size);
965 if (status < 0) {
966 if (status != -ENOSPC)
967 mlog_errno(status);
968 status = -ENOSPC;
969 goto bail_unlock;
973 if ((attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) ||
974 (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) {
976 * Gather pointers to quota structures so that allocation /
977 * freeing of quota structures happens here and not inside
978 * vfs_dq_transfer() where we have problems with lock ordering
980 if (attr->ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid
981 && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
982 OCFS2_FEATURE_RO_COMPAT_USRQUOTA)) {
983 transfer_to[USRQUOTA] = dqget(sb, attr->ia_uid,
984 USRQUOTA);
985 transfer_from[USRQUOTA] = dqget(sb, inode->i_uid,
986 USRQUOTA);
987 if (!transfer_to[USRQUOTA] || !transfer_from[USRQUOTA]) {
988 status = -ESRCH;
989 goto bail_unlock;
992 if (attr->ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid
993 && OCFS2_HAS_RO_COMPAT_FEATURE(sb,
994 OCFS2_FEATURE_RO_COMPAT_GRPQUOTA)) {
995 transfer_to[GRPQUOTA] = dqget(sb, attr->ia_gid,
996 GRPQUOTA);
997 transfer_from[GRPQUOTA] = dqget(sb, inode->i_gid,
998 GRPQUOTA);
999 if (!transfer_to[GRPQUOTA] || !transfer_from[GRPQUOTA]) {
1000 status = -ESRCH;
1001 goto bail_unlock;
1004 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS +
1005 2 * ocfs2_quota_trans_credits(sb));
1006 if (IS_ERR(handle)) {
1007 status = PTR_ERR(handle);
1008 mlog_errno(status);
1009 goto bail_unlock;
1011 status = vfs_dq_transfer(inode, attr) ? -EDQUOT : 0;
1012 if (status < 0)
1013 goto bail_commit;
1014 } else {
1015 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1016 if (IS_ERR(handle)) {
1017 status = PTR_ERR(handle);
1018 mlog_errno(status);
1019 goto bail_unlock;
1024 * This will intentionally not wind up calling vmtruncate(),
1025 * since all the work for a size change has been done above.
1026 * Otherwise, we could get into problems with truncate as
1027 * ip_alloc_sem is used there to protect against i_size
1028 * changes.
1030 status = inode_setattr(inode, attr);
1031 if (status < 0) {
1032 mlog_errno(status);
1033 goto bail_commit;
1036 status = ocfs2_mark_inode_dirty(handle, inode, bh);
1037 if (status < 0)
1038 mlog_errno(status);
1040 bail_commit:
1041 ocfs2_commit_trans(osb, handle);
1042 bail_unlock:
1043 ocfs2_inode_unlock(inode, 1);
1044 bail_unlock_rw:
1045 if (size_change)
1046 ocfs2_rw_unlock(inode, 1);
1047 bail:
1048 brelse(bh);
1050 /* Release quota pointers in case we acquired them */
1051 for (qtype = 0; qtype < MAXQUOTAS; qtype++) {
1052 dqput(transfer_to[qtype]);
1053 dqput(transfer_from[qtype]);
1056 if (!status && attr->ia_valid & ATTR_MODE) {
1057 status = ocfs2_acl_chmod(inode);
1058 if (status < 0)
1059 mlog_errno(status);
1062 mlog_exit(status);
1063 return status;
1066 int ocfs2_getattr(struct vfsmount *mnt,
1067 struct dentry *dentry,
1068 struct kstat *stat)
1070 struct inode *inode = dentry->d_inode;
1071 struct super_block *sb = dentry->d_inode->i_sb;
1072 struct ocfs2_super *osb = sb->s_fs_info;
1073 int err;
1075 mlog_entry_void();
1077 err = ocfs2_inode_revalidate(dentry);
1078 if (err) {
1079 if (err != -ENOENT)
1080 mlog_errno(err);
1081 goto bail;
1084 generic_fillattr(inode, stat);
1086 /* We set the blksize from the cluster size for performance */
1087 stat->blksize = osb->s_clustersize;
1089 bail:
1090 mlog_exit(err);
1092 return err;
1095 int ocfs2_permission(struct inode *inode, int mask)
1097 int ret;
1099 mlog_entry_void();
1101 ret = ocfs2_inode_lock(inode, NULL, 0);
1102 if (ret) {
1103 if (ret != -ENOENT)
1104 mlog_errno(ret);
1105 goto out;
1108 ret = generic_permission(inode, mask, ocfs2_check_acl);
1110 ocfs2_inode_unlock(inode, 0);
1111 out:
1112 mlog_exit(ret);
1113 return ret;
1116 static int __ocfs2_write_remove_suid(struct inode *inode,
1117 struct buffer_head *bh)
1119 int ret;
1120 handle_t *handle;
1121 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1122 struct ocfs2_dinode *di;
1124 mlog_entry("(Inode %llu, mode 0%o)\n",
1125 (unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_mode);
1127 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1128 if (IS_ERR(handle)) {
1129 ret = PTR_ERR(handle);
1130 mlog_errno(ret);
1131 goto out;
1134 ret = ocfs2_journal_access_di(handle, inode, bh,
1135 OCFS2_JOURNAL_ACCESS_WRITE);
1136 if (ret < 0) {
1137 mlog_errno(ret);
1138 goto out_trans;
1141 inode->i_mode &= ~S_ISUID;
1142 if ((inode->i_mode & S_ISGID) && (inode->i_mode & S_IXGRP))
1143 inode->i_mode &= ~S_ISGID;
1145 di = (struct ocfs2_dinode *) bh->b_data;
1146 di->i_mode = cpu_to_le16(inode->i_mode);
1148 ret = ocfs2_journal_dirty(handle, bh);
1149 if (ret < 0)
1150 mlog_errno(ret);
1152 out_trans:
1153 ocfs2_commit_trans(osb, handle);
1154 out:
1155 mlog_exit(ret);
1156 return ret;
1160 * Will look for holes and unwritten extents in the range starting at
1161 * pos for count bytes (inclusive).
1163 static int ocfs2_check_range_for_holes(struct inode *inode, loff_t pos,
1164 size_t count)
1166 int ret = 0;
1167 unsigned int extent_flags;
1168 u32 cpos, clusters, extent_len, phys_cpos;
1169 struct super_block *sb = inode->i_sb;
1171 cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits;
1172 clusters = ocfs2_clusters_for_bytes(sb, pos + count) - cpos;
1174 while (clusters) {
1175 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos, &extent_len,
1176 &extent_flags);
1177 if (ret < 0) {
1178 mlog_errno(ret);
1179 goto out;
1182 if (phys_cpos == 0 || (extent_flags & OCFS2_EXT_UNWRITTEN)) {
1183 ret = 1;
1184 break;
1187 if (extent_len > clusters)
1188 extent_len = clusters;
1190 clusters -= extent_len;
1191 cpos += extent_len;
1193 out:
1194 return ret;
1197 static int ocfs2_write_remove_suid(struct inode *inode)
1199 int ret;
1200 struct buffer_head *bh = NULL;
1202 ret = ocfs2_read_inode_block(inode, &bh);
1203 if (ret < 0) {
1204 mlog_errno(ret);
1205 goto out;
1208 ret = __ocfs2_write_remove_suid(inode, bh);
1209 out:
1210 brelse(bh);
1211 return ret;
1215 * Allocate enough extents to cover the region starting at byte offset
1216 * start for len bytes. Existing extents are skipped, any extents
1217 * added are marked as "unwritten".
1219 static int ocfs2_allocate_unwritten_extents(struct inode *inode,
1220 u64 start, u64 len)
1222 int ret;
1223 u32 cpos, phys_cpos, clusters, alloc_size;
1224 u64 end = start + len;
1225 struct buffer_head *di_bh = NULL;
1227 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1228 ret = ocfs2_read_inode_block(inode, &di_bh);
1229 if (ret) {
1230 mlog_errno(ret);
1231 goto out;
1235 * Nothing to do if the requested reservation range
1236 * fits within the inode.
1238 if (ocfs2_size_fits_inline_data(di_bh, end))
1239 goto out;
1241 ret = ocfs2_convert_inline_data_to_extents(inode, di_bh);
1242 if (ret) {
1243 mlog_errno(ret);
1244 goto out;
1249 * We consider both start and len to be inclusive.
1251 cpos = start >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
1252 clusters = ocfs2_clusters_for_bytes(inode->i_sb, start + len);
1253 clusters -= cpos;
1255 while (clusters) {
1256 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos,
1257 &alloc_size, NULL);
1258 if (ret) {
1259 mlog_errno(ret);
1260 goto out;
1264 * Hole or existing extent len can be arbitrary, so
1265 * cap it to our own allocation request.
1267 if (alloc_size > clusters)
1268 alloc_size = clusters;
1270 if (phys_cpos) {
1272 * We already have an allocation at this
1273 * region so we can safely skip it.
1275 goto next;
1278 ret = __ocfs2_extend_allocation(inode, cpos, alloc_size, 1);
1279 if (ret) {
1280 if (ret != -ENOSPC)
1281 mlog_errno(ret);
1282 goto out;
1285 next:
1286 cpos += alloc_size;
1287 clusters -= alloc_size;
1290 ret = 0;
1291 out:
1293 brelse(di_bh);
1294 return ret;
1298 * Truncate a byte range, avoiding pages within partial clusters. This
1299 * preserves those pages for the zeroing code to write to.
1301 static void ocfs2_truncate_cluster_pages(struct inode *inode, u64 byte_start,
1302 u64 byte_len)
1304 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1305 loff_t start, end;
1306 struct address_space *mapping = inode->i_mapping;
1308 start = (loff_t)ocfs2_align_bytes_to_clusters(inode->i_sb, byte_start);
1309 end = byte_start + byte_len;
1310 end = end & ~(osb->s_clustersize - 1);
1312 if (start < end) {
1313 unmap_mapping_range(mapping, start, end - start, 0);
1314 truncate_inode_pages_range(mapping, start, end - 1);
1318 static int ocfs2_zero_partial_clusters(struct inode *inode,
1319 u64 start, u64 len)
1321 int ret = 0;
1322 u64 tmpend, end = start + len;
1323 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1324 unsigned int csize = osb->s_clustersize;
1325 handle_t *handle;
1328 * The "start" and "end" values are NOT necessarily part of
1329 * the range whose allocation is being deleted. Rather, this
1330 * is what the user passed in with the request. We must zero
1331 * partial clusters here. There's no need to worry about
1332 * physical allocation - the zeroing code knows to skip holes.
1334 mlog(0, "byte start: %llu, end: %llu\n",
1335 (unsigned long long)start, (unsigned long long)end);
1338 * If both edges are on a cluster boundary then there's no
1339 * zeroing required as the region is part of the allocation to
1340 * be truncated.
1342 if ((start & (csize - 1)) == 0 && (end & (csize - 1)) == 0)
1343 goto out;
1345 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1346 if (IS_ERR(handle)) {
1347 ret = PTR_ERR(handle);
1348 mlog_errno(ret);
1349 goto out;
1353 * We want to get the byte offset of the end of the 1st cluster.
1355 tmpend = (u64)osb->s_clustersize + (start & ~(osb->s_clustersize - 1));
1356 if (tmpend > end)
1357 tmpend = end;
1359 mlog(0, "1st range: start: %llu, tmpend: %llu\n",
1360 (unsigned long long)start, (unsigned long long)tmpend);
1362 ret = ocfs2_zero_range_for_truncate(inode, handle, start, tmpend);
1363 if (ret)
1364 mlog_errno(ret);
1366 if (tmpend < end) {
1368 * This may make start and end equal, but the zeroing
1369 * code will skip any work in that case so there's no
1370 * need to catch it up here.
1372 start = end & ~(osb->s_clustersize - 1);
1374 mlog(0, "2nd range: start: %llu, end: %llu\n",
1375 (unsigned long long)start, (unsigned long long)end);
1377 ret = ocfs2_zero_range_for_truncate(inode, handle, start, end);
1378 if (ret)
1379 mlog_errno(ret);
1382 ocfs2_commit_trans(osb, handle);
1383 out:
1384 return ret;
1387 static int ocfs2_remove_inode_range(struct inode *inode,
1388 struct buffer_head *di_bh, u64 byte_start,
1389 u64 byte_len)
1391 int ret = 0;
1392 u32 trunc_start, trunc_len, cpos, phys_cpos, alloc_size;
1393 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1394 struct ocfs2_cached_dealloc_ctxt dealloc;
1395 struct address_space *mapping = inode->i_mapping;
1396 struct ocfs2_extent_tree et;
1398 ocfs2_init_dinode_extent_tree(&et, inode, di_bh);
1399 ocfs2_init_dealloc_ctxt(&dealloc);
1401 if (byte_len == 0)
1402 return 0;
1404 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1405 ret = ocfs2_truncate_inline(inode, di_bh, byte_start,
1406 byte_start + byte_len, 0);
1407 if (ret) {
1408 mlog_errno(ret);
1409 goto out;
1412 * There's no need to get fancy with the page cache
1413 * truncate of an inline-data inode. We're talking
1414 * about less than a page here, which will be cached
1415 * in the dinode buffer anyway.
1417 unmap_mapping_range(mapping, 0, 0, 0);
1418 truncate_inode_pages(mapping, 0);
1419 goto out;
1422 trunc_start = ocfs2_clusters_for_bytes(osb->sb, byte_start);
1423 trunc_len = (byte_start + byte_len) >> osb->s_clustersize_bits;
1424 if (trunc_len >= trunc_start)
1425 trunc_len -= trunc_start;
1426 else
1427 trunc_len = 0;
1429 mlog(0, "Inode: %llu, start: %llu, len: %llu, cstart: %u, clen: %u\n",
1430 (unsigned long long)OCFS2_I(inode)->ip_blkno,
1431 (unsigned long long)byte_start,
1432 (unsigned long long)byte_len, trunc_start, trunc_len);
1434 ret = ocfs2_zero_partial_clusters(inode, byte_start, byte_len);
1435 if (ret) {
1436 mlog_errno(ret);
1437 goto out;
1440 cpos = trunc_start;
1441 while (trunc_len) {
1442 ret = ocfs2_get_clusters(inode, cpos, &phys_cpos,
1443 &alloc_size, NULL);
1444 if (ret) {
1445 mlog_errno(ret);
1446 goto out;
1449 if (alloc_size > trunc_len)
1450 alloc_size = trunc_len;
1452 /* Only do work for non-holes */
1453 if (phys_cpos != 0) {
1454 ret = ocfs2_remove_btree_range(inode, &et, cpos,
1455 phys_cpos, alloc_size,
1456 &dealloc);
1457 if (ret) {
1458 mlog_errno(ret);
1459 goto out;
1463 cpos += alloc_size;
1464 trunc_len -= alloc_size;
1467 ocfs2_truncate_cluster_pages(inode, byte_start, byte_len);
1469 out:
1470 ocfs2_schedule_truncate_log_flush(osb, 1);
1471 ocfs2_run_deallocs(osb, &dealloc);
1473 return ret;
1477 * Parts of this function taken from xfs_change_file_space()
1479 static int __ocfs2_change_file_space(struct file *file, struct inode *inode,
1480 loff_t f_pos, unsigned int cmd,
1481 struct ocfs2_space_resv *sr,
1482 int change_size)
1484 int ret;
1485 s64 llen;
1486 loff_t size;
1487 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1488 struct buffer_head *di_bh = NULL;
1489 handle_t *handle;
1490 unsigned long long max_off = inode->i_sb->s_maxbytes;
1492 if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
1493 return -EROFS;
1495 mutex_lock(&inode->i_mutex);
1498 * This prevents concurrent writes on other nodes
1500 ret = ocfs2_rw_lock(inode, 1);
1501 if (ret) {
1502 mlog_errno(ret);
1503 goto out;
1506 ret = ocfs2_inode_lock(inode, &di_bh, 1);
1507 if (ret) {
1508 mlog_errno(ret);
1509 goto out_rw_unlock;
1512 if (inode->i_flags & (S_IMMUTABLE|S_APPEND)) {
1513 ret = -EPERM;
1514 goto out_inode_unlock;
1517 switch (sr->l_whence) {
1518 case 0: /*SEEK_SET*/
1519 break;
1520 case 1: /*SEEK_CUR*/
1521 sr->l_start += f_pos;
1522 break;
1523 case 2: /*SEEK_END*/
1524 sr->l_start += i_size_read(inode);
1525 break;
1526 default:
1527 ret = -EINVAL;
1528 goto out_inode_unlock;
1530 sr->l_whence = 0;
1532 llen = sr->l_len > 0 ? sr->l_len - 1 : sr->l_len;
1534 if (sr->l_start < 0
1535 || sr->l_start > max_off
1536 || (sr->l_start + llen) < 0
1537 || (sr->l_start + llen) > max_off) {
1538 ret = -EINVAL;
1539 goto out_inode_unlock;
1541 size = sr->l_start + sr->l_len;
1543 if (cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) {
1544 if (sr->l_len <= 0) {
1545 ret = -EINVAL;
1546 goto out_inode_unlock;
1550 if (file && should_remove_suid(file->f_path.dentry)) {
1551 ret = __ocfs2_write_remove_suid(inode, di_bh);
1552 if (ret) {
1553 mlog_errno(ret);
1554 goto out_inode_unlock;
1558 down_write(&OCFS2_I(inode)->ip_alloc_sem);
1559 switch (cmd) {
1560 case OCFS2_IOC_RESVSP:
1561 case OCFS2_IOC_RESVSP64:
1563 * This takes unsigned offsets, but the signed ones we
1564 * pass have been checked against overflow above.
1566 ret = ocfs2_allocate_unwritten_extents(inode, sr->l_start,
1567 sr->l_len);
1568 break;
1569 case OCFS2_IOC_UNRESVSP:
1570 case OCFS2_IOC_UNRESVSP64:
1571 ret = ocfs2_remove_inode_range(inode, di_bh, sr->l_start,
1572 sr->l_len);
1573 break;
1574 default:
1575 ret = -EINVAL;
1577 up_write(&OCFS2_I(inode)->ip_alloc_sem);
1578 if (ret) {
1579 mlog_errno(ret);
1580 goto out_inode_unlock;
1584 * We update c/mtime for these changes
1586 handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
1587 if (IS_ERR(handle)) {
1588 ret = PTR_ERR(handle);
1589 mlog_errno(ret);
1590 goto out_inode_unlock;
1593 if (change_size && i_size_read(inode) < size)
1594 i_size_write(inode, size);
1596 inode->i_ctime = inode->i_mtime = CURRENT_TIME;
1597 ret = ocfs2_mark_inode_dirty(handle, inode, di_bh);
1598 if (ret < 0)
1599 mlog_errno(ret);
1601 ocfs2_commit_trans(osb, handle);
1603 out_inode_unlock:
1604 brelse(di_bh);
1605 ocfs2_inode_unlock(inode, 1);
1606 out_rw_unlock:
1607 ocfs2_rw_unlock(inode, 1);
1609 out:
1610 mutex_unlock(&inode->i_mutex);
1611 return ret;
1614 int ocfs2_change_file_space(struct file *file, unsigned int cmd,
1615 struct ocfs2_space_resv *sr)
1617 struct inode *inode = file->f_path.dentry->d_inode;
1618 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1620 if ((cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) &&
1621 !ocfs2_writes_unwritten_extents(osb))
1622 return -ENOTTY;
1623 else if ((cmd == OCFS2_IOC_UNRESVSP || cmd == OCFS2_IOC_UNRESVSP64) &&
1624 !ocfs2_sparse_alloc(osb))
1625 return -ENOTTY;
1627 if (!S_ISREG(inode->i_mode))
1628 return -EINVAL;
1630 if (!(file->f_mode & FMODE_WRITE))
1631 return -EBADF;
1633 return __ocfs2_change_file_space(file, inode, file->f_pos, cmd, sr, 0);
1636 static long ocfs2_fallocate(struct inode *inode, int mode, loff_t offset,
1637 loff_t len)
1639 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1640 struct ocfs2_space_resv sr;
1641 int change_size = 1;
1643 if (!ocfs2_writes_unwritten_extents(osb))
1644 return -EOPNOTSUPP;
1646 if (S_ISDIR(inode->i_mode))
1647 return -ENODEV;
1649 if (mode & FALLOC_FL_KEEP_SIZE)
1650 change_size = 0;
1652 sr.l_whence = 0;
1653 sr.l_start = (s64)offset;
1654 sr.l_len = (s64)len;
1656 return __ocfs2_change_file_space(NULL, inode, offset,
1657 OCFS2_IOC_RESVSP64, &sr, change_size);
1660 static int ocfs2_prepare_inode_for_write(struct dentry *dentry,
1661 loff_t *ppos,
1662 size_t count,
1663 int appending,
1664 int *direct_io)
1666 int ret = 0, meta_level = 0;
1667 struct inode *inode = dentry->d_inode;
1668 loff_t saved_pos, end;
1671 * We start with a read level meta lock and only jump to an ex
1672 * if we need to make modifications here.
1674 for(;;) {
1675 ret = ocfs2_inode_lock(inode, NULL, meta_level);
1676 if (ret < 0) {
1677 meta_level = -1;
1678 mlog_errno(ret);
1679 goto out;
1682 /* Clear suid / sgid if necessary. We do this here
1683 * instead of later in the write path because
1684 * remove_suid() calls ->setattr without any hint that
1685 * we may have already done our cluster locking. Since
1686 * ocfs2_setattr() *must* take cluster locks to
1687 * proceeed, this will lead us to recursively lock the
1688 * inode. There's also the dinode i_size state which
1689 * can be lost via setattr during extending writes (we
1690 * set inode->i_size at the end of a write. */
1691 if (should_remove_suid(dentry)) {
1692 if (meta_level == 0) {
1693 ocfs2_inode_unlock(inode, meta_level);
1694 meta_level = 1;
1695 continue;
1698 ret = ocfs2_write_remove_suid(inode);
1699 if (ret < 0) {
1700 mlog_errno(ret);
1701 goto out_unlock;
1705 /* work on a copy of ppos until we're sure that we won't have
1706 * to recalculate it due to relocking. */
1707 if (appending) {
1708 saved_pos = i_size_read(inode);
1709 mlog(0, "O_APPEND: inode->i_size=%llu\n", saved_pos);
1710 } else {
1711 saved_pos = *ppos;
1714 end = saved_pos + count;
1717 * Skip the O_DIRECT checks if we don't need
1718 * them.
1720 if (!direct_io || !(*direct_io))
1721 break;
1724 * There's no sane way to do direct writes to an inode
1725 * with inline data.
1727 if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
1728 *direct_io = 0;
1729 break;
1733 * Allowing concurrent direct writes means
1734 * i_size changes wouldn't be synchronized, so
1735 * one node could wind up truncating another
1736 * nodes writes.
1738 if (end > i_size_read(inode)) {
1739 *direct_io = 0;
1740 break;
1744 * We don't fill holes during direct io, so
1745 * check for them here. If any are found, the
1746 * caller will have to retake some cluster
1747 * locks and initiate the io as buffered.
1749 ret = ocfs2_check_range_for_holes(inode, saved_pos, count);
1750 if (ret == 1) {
1751 *direct_io = 0;
1752 ret = 0;
1753 } else if (ret < 0)
1754 mlog_errno(ret);
1755 break;
1758 if (appending)
1759 *ppos = saved_pos;
1761 out_unlock:
1762 ocfs2_inode_unlock(inode, meta_level);
1764 out:
1765 return ret;
1768 static ssize_t ocfs2_file_aio_write(struct kiocb *iocb,
1769 const struct iovec *iov,
1770 unsigned long nr_segs,
1771 loff_t pos)
1773 int ret, direct_io, appending, rw_level, have_alloc_sem = 0;
1774 int can_do_direct;
1775 ssize_t written = 0;
1776 size_t ocount; /* original count */
1777 size_t count; /* after file limit checks */
1778 loff_t old_size, *ppos = &iocb->ki_pos;
1779 u32 old_clusters;
1780 struct file *file = iocb->ki_filp;
1781 struct inode *inode = file->f_path.dentry->d_inode;
1782 struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
1784 mlog_entry("(0x%p, %u, '%.*s')\n", file,
1785 (unsigned int)nr_segs,
1786 file->f_path.dentry->d_name.len,
1787 file->f_path.dentry->d_name.name);
1789 if (iocb->ki_left == 0)
1790 return 0;
1792 vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
1794 appending = file->f_flags & O_APPEND ? 1 : 0;
1795 direct_io = file->f_flags & O_DIRECT ? 1 : 0;
1797 mutex_lock(&inode->i_mutex);
1799 relock:
1800 /* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */
1801 if (direct_io) {
1802 down_read(&inode->i_alloc_sem);
1803 have_alloc_sem = 1;
1806 /* concurrent O_DIRECT writes are allowed */
1807 rw_level = !direct_io;
1808 ret = ocfs2_rw_lock(inode, rw_level);
1809 if (ret < 0) {
1810 mlog_errno(ret);
1811 goto out_sems;
1814 can_do_direct = direct_io;
1815 ret = ocfs2_prepare_inode_for_write(file->f_path.dentry, ppos,
1816 iocb->ki_left, appending,
1817 &can_do_direct);
1818 if (ret < 0) {
1819 mlog_errno(ret);
1820 goto out;
1824 * We can't complete the direct I/O as requested, fall back to
1825 * buffered I/O.
1827 if (direct_io && !can_do_direct) {
1828 ocfs2_rw_unlock(inode, rw_level);
1829 up_read(&inode->i_alloc_sem);
1831 have_alloc_sem = 0;
1832 rw_level = -1;
1834 direct_io = 0;
1835 goto relock;
1839 * To later detect whether a journal commit for sync writes is
1840 * necessary, we sample i_size, and cluster count here.
1842 old_size = i_size_read(inode);
1843 old_clusters = OCFS2_I(inode)->ip_clusters;
1845 /* communicate with ocfs2_dio_end_io */
1846 ocfs2_iocb_set_rw_locked(iocb, rw_level);
1848 if (direct_io) {
1849 ret = generic_segment_checks(iov, &nr_segs, &ocount,
1850 VERIFY_READ);
1851 if (ret)
1852 goto out_dio;
1854 count = ocount;
1855 ret = generic_write_checks(file, ppos, &count,
1856 S_ISBLK(inode->i_mode));
1857 if (ret)
1858 goto out_dio;
1860 written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos,
1861 ppos, count, ocount);
1862 if (written < 0) {
1864 * direct write may have instantiated a few
1865 * blocks outside i_size. Trim these off again.
1866 * Don't need i_size_read because we hold i_mutex.
1868 if (*ppos + count > inode->i_size)
1869 vmtruncate(inode, inode->i_size);
1870 ret = written;
1871 goto out_dio;
1873 } else {
1874 written = __generic_file_aio_write(iocb, iov, nr_segs, ppos);
1877 out_dio:
1878 /* buffered aio wouldn't have proper lock coverage today */
1879 BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
1881 if ((file->f_flags & O_SYNC && !direct_io) || IS_SYNC(inode)) {
1882 ret = filemap_fdatawrite_range(file->f_mapping, pos,
1883 pos + count - 1);
1884 if (ret < 0)
1885 written = ret;
1887 if (!ret && (old_size != i_size_read(inode) ||
1888 old_clusters != OCFS2_I(inode)->ip_clusters)) {
1889 ret = jbd2_journal_force_commit(osb->journal->j_journal);
1890 if (ret < 0)
1891 written = ret;
1894 if (!ret)
1895 ret = filemap_fdatawait_range(file->f_mapping, pos,
1896 pos + count - 1);
1900 * deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
1901 * function pointer which is called when o_direct io completes so that
1902 * it can unlock our rw lock. (it's the clustered equivalent of
1903 * i_alloc_sem; protects truncate from racing with pending ios).
1904 * Unfortunately there are error cases which call end_io and others
1905 * that don't. so we don't have to unlock the rw_lock if either an
1906 * async dio is going to do it in the future or an end_io after an
1907 * error has already done it.
1909 if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) {
1910 rw_level = -1;
1911 have_alloc_sem = 0;
1914 out:
1915 if (rw_level != -1)
1916 ocfs2_rw_unlock(inode, rw_level);
1918 out_sems:
1919 if (have_alloc_sem)
1920 up_read(&inode->i_alloc_sem);
1922 mutex_unlock(&inode->i_mutex);
1924 if (written)
1925 ret = written;
1926 mlog_exit(ret);
1927 return ret;
1930 static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
1931 struct file *out,
1932 struct splice_desc *sd)
1934 int ret;
1936 ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos,
1937 sd->total_len, 0, NULL);
1938 if (ret < 0) {
1939 mlog_errno(ret);
1940 return ret;
1943 return splice_from_pipe_feed(pipe, sd, pipe_to_file);
1946 static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
1947 struct file *out,
1948 loff_t *ppos,
1949 size_t len,
1950 unsigned int flags)
1952 int ret;
1953 struct address_space *mapping = out->f_mapping;
1954 struct inode *inode = mapping->host;
1955 struct splice_desc sd = {
1956 .total_len = len,
1957 .flags = flags,
1958 .pos = *ppos,
1959 .u.file = out,
1962 mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
1963 (unsigned int)len,
1964 out->f_path.dentry->d_name.len,
1965 out->f_path.dentry->d_name.name);
1967 if (pipe->inode)
1968 mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
1970 splice_from_pipe_begin(&sd);
1971 do {
1972 ret = splice_from_pipe_next(pipe, &sd);
1973 if (ret <= 0)
1974 break;
1976 mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
1977 ret = ocfs2_rw_lock(inode, 1);
1978 if (ret < 0)
1979 mlog_errno(ret);
1980 else {
1981 ret = ocfs2_splice_to_file(pipe, out, &sd);
1982 ocfs2_rw_unlock(inode, 1);
1984 mutex_unlock(&inode->i_mutex);
1985 } while (ret > 0);
1986 splice_from_pipe_end(pipe, &sd);
1988 if (pipe->inode)
1989 mutex_unlock(&pipe->inode->i_mutex);
1991 if (sd.num_spliced)
1992 ret = sd.num_spliced;
1994 if (ret > 0) {
1995 unsigned long nr_pages;
1996 int err;
1998 nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
2000 err = generic_write_sync(out, *ppos, ret);
2001 if (err)
2002 ret = err;
2003 else
2004 *ppos += ret;
2006 balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
2009 mlog_exit(ret);
2010 return ret;
2013 static ssize_t ocfs2_file_splice_read(struct file *in,
2014 loff_t *ppos,
2015 struct pipe_inode_info *pipe,
2016 size_t len,
2017 unsigned int flags)
2019 int ret = 0, lock_level = 0;
2020 struct inode *inode = in->f_path.dentry->d_inode;
2022 mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", in, pipe,
2023 (unsigned int)len,
2024 in->f_path.dentry->d_name.len,
2025 in->f_path.dentry->d_name.name);
2028 * See the comment in ocfs2_file_aio_read()
2030 ret = ocfs2_inode_lock_atime(inode, in->f_vfsmnt, &lock_level);
2031 if (ret < 0) {
2032 mlog_errno(ret);
2033 goto bail;
2035 ocfs2_inode_unlock(inode, lock_level);
2037 ret = generic_file_splice_read(in, ppos, pipe, len, flags);
2039 bail:
2040 mlog_exit(ret);
2041 return ret;
2044 static ssize_t ocfs2_file_aio_read(struct kiocb *iocb,
2045 const struct iovec *iov,
2046 unsigned long nr_segs,
2047 loff_t pos)
2049 int ret = 0, rw_level = -1, have_alloc_sem = 0, lock_level = 0;
2050 struct file *filp = iocb->ki_filp;
2051 struct inode *inode = filp->f_path.dentry->d_inode;
2053 mlog_entry("(0x%p, %u, '%.*s')\n", filp,
2054 (unsigned int)nr_segs,
2055 filp->f_path.dentry->d_name.len,
2056 filp->f_path.dentry->d_name.name);
2058 if (!inode) {
2059 ret = -EINVAL;
2060 mlog_errno(ret);
2061 goto bail;
2065 * buffered reads protect themselves in ->readpage(). O_DIRECT reads
2066 * need locks to protect pending reads from racing with truncate.
2068 if (filp->f_flags & O_DIRECT) {
2069 down_read(&inode->i_alloc_sem);
2070 have_alloc_sem = 1;
2072 ret = ocfs2_rw_lock(inode, 0);
2073 if (ret < 0) {
2074 mlog_errno(ret);
2075 goto bail;
2077 rw_level = 0;
2078 /* communicate with ocfs2_dio_end_io */
2079 ocfs2_iocb_set_rw_locked(iocb, rw_level);
2083 * We're fine letting folks race truncates and extending
2084 * writes with read across the cluster, just like they can
2085 * locally. Hence no rw_lock during read.
2087 * Take and drop the meta data lock to update inode fields
2088 * like i_size. This allows the checks down below
2089 * generic_file_aio_read() a chance of actually working.
2091 ret = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level);
2092 if (ret < 0) {
2093 mlog_errno(ret);
2094 goto bail;
2096 ocfs2_inode_unlock(inode, lock_level);
2098 ret = generic_file_aio_read(iocb, iov, nr_segs, iocb->ki_pos);
2099 if (ret == -EINVAL)
2100 mlog(0, "generic_file_aio_read returned -EINVAL\n");
2102 /* buffered aio wouldn't have proper lock coverage today */
2103 BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT));
2105 /* see ocfs2_file_aio_write */
2106 if (ret == -EIOCBQUEUED || !ocfs2_iocb_is_rw_locked(iocb)) {
2107 rw_level = -1;
2108 have_alloc_sem = 0;
2111 bail:
2112 if (have_alloc_sem)
2113 up_read(&inode->i_alloc_sem);
2114 if (rw_level != -1)
2115 ocfs2_rw_unlock(inode, rw_level);
2116 mlog_exit(ret);
2118 return ret;
2121 const struct inode_operations ocfs2_file_iops = {
2122 .setattr = ocfs2_setattr,
2123 .getattr = ocfs2_getattr,
2124 .permission = ocfs2_permission,
2125 .setxattr = generic_setxattr,
2126 .getxattr = generic_getxattr,
2127 .listxattr = ocfs2_listxattr,
2128 .removexattr = generic_removexattr,
2129 .fallocate = ocfs2_fallocate,
2130 .fiemap = ocfs2_fiemap,
2133 const struct inode_operations ocfs2_special_file_iops = {
2134 .setattr = ocfs2_setattr,
2135 .getattr = ocfs2_getattr,
2136 .permission = ocfs2_permission,
2140 * Other than ->lock, keep ocfs2_fops and ocfs2_dops in sync with
2141 * ocfs2_fops_no_plocks and ocfs2_dops_no_plocks!
2143 const struct file_operations ocfs2_fops = {
2144 .llseek = generic_file_llseek,
2145 .read = do_sync_read,
2146 .write = do_sync_write,
2147 .mmap = ocfs2_mmap,
2148 .fsync = ocfs2_sync_file,
2149 .release = ocfs2_file_release,
2150 .open = ocfs2_file_open,
2151 .aio_read = ocfs2_file_aio_read,
2152 .aio_write = ocfs2_file_aio_write,
2153 .unlocked_ioctl = ocfs2_ioctl,
2154 #ifdef CONFIG_COMPAT
2155 .compat_ioctl = ocfs2_compat_ioctl,
2156 #endif
2157 .lock = ocfs2_lock,
2158 .flock = ocfs2_flock,
2159 .splice_read = ocfs2_file_splice_read,
2160 .splice_write = ocfs2_file_splice_write,
2163 const struct file_operations ocfs2_dops = {
2164 .llseek = generic_file_llseek,
2165 .read = generic_read_dir,
2166 .readdir = ocfs2_readdir,
2167 .fsync = ocfs2_sync_file,
2168 .release = ocfs2_dir_release,
2169 .open = ocfs2_dir_open,
2170 .unlocked_ioctl = ocfs2_ioctl,
2171 #ifdef CONFIG_COMPAT
2172 .compat_ioctl = ocfs2_compat_ioctl,
2173 #endif
2174 .lock = ocfs2_lock,
2175 .flock = ocfs2_flock,
2179 * POSIX-lockless variants of our file_operations.
2181 * These will be used if the underlying cluster stack does not support
2182 * posix file locking, if the user passes the "localflocks" mount
2183 * option, or if we have a local-only fs.
2185 * ocfs2_flock is in here because all stacks handle UNIX file locks,
2186 * so we still want it in the case of no stack support for
2187 * plocks. Internally, it will do the right thing when asked to ignore
2188 * the cluster.
2190 const struct file_operations ocfs2_fops_no_plocks = {
2191 .llseek = generic_file_llseek,
2192 .read = do_sync_read,
2193 .write = do_sync_write,
2194 .mmap = ocfs2_mmap,
2195 .fsync = ocfs2_sync_file,
2196 .release = ocfs2_file_release,
2197 .open = ocfs2_file_open,
2198 .aio_read = ocfs2_file_aio_read,
2199 .aio_write = ocfs2_file_aio_write,
2200 .unlocked_ioctl = ocfs2_ioctl,
2201 #ifdef CONFIG_COMPAT
2202 .compat_ioctl = ocfs2_compat_ioctl,
2203 #endif
2204 .flock = ocfs2_flock,
2205 .splice_read = ocfs2_file_splice_read,
2206 .splice_write = ocfs2_file_splice_write,
2209 const struct file_operations ocfs2_dops_no_plocks = {
2210 .llseek = generic_file_llseek,
2211 .read = generic_read_dir,
2212 .readdir = ocfs2_readdir,
2213 .fsync = ocfs2_sync_file,
2214 .release = ocfs2_dir_release,
2215 .open = ocfs2_dir_open,
2216 .unlocked_ioctl = ocfs2_ioctl,
2217 #ifdef CONFIG_COMPAT
2218 .compat_ioctl = ocfs2_compat_ioctl,
2219 #endif
2220 .flock = ocfs2_flock,