WIP FPC-III support
[linux/fpc-iii.git] / Documentation / devicetree / bindings / net / davinci_emac.txt
blob5e3579e72e2d041543628bf2a31dc28041f052d4
1 * Texas Instruments Davinci EMAC
3 This file provides information, what the device node
4 for the davinci_emac interface contains.
6 Required properties:
7 - compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
8   "ti,dm816-emac"
9 - reg: Offset and length of the register set for the device
10 - ti,davinci-ctrl-reg-offset: offset to control register
11 - ti,davinci-ctrl-mod-reg-offset: offset to control module register
12 - ti,davinci-ctrl-ram-offset: offset to control module ram
13 - ti,davinci-ctrl-ram-size: size of control module ram
14 - interrupts: interrupt mapping for the davinci emac interrupts sources:
15               4 sources: <Receive Threshold Interrupt
16                           Receive Interrupt
17                           Transmit Interrupt
18                           Miscellaneous Interrupt>
20 Optional properties:
21 - phy-handle: See ethernet.txt file in the same directory.
22               If absent, davinci_emac driver defaults to 100/FULL.
23 - ti,davinci-rmii-en: 1 byte, 1 means use RMII
24 - ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM?
26 The MAC address will be determined using the optional properties
27 defined in ethernet.txt.
29 Example (enbw_cmc board):
30         eth0: emac@1e20000 {
31                 compatible = "ti,davinci-dm6467-emac";
32                 reg = <0x220000 0x4000>;
33                 ti,davinci-ctrl-reg-offset = <0x3000>;
34                 ti,davinci-ctrl-mod-reg-offset = <0x2000>;
35                 ti,davinci-ctrl-ram-offset = <0>;
36                 ti,davinci-ctrl-ram-size = <0x2000>;
37                 local-mac-address = [ 00 00 00 00 00 00 ];
38                 interrupts = <33
39                                 34
40                                 35
41                                 36
42                                 >;
43                 interrupt-parent = <&intc>;
44         };