WIP FPC-III support
[linux/fpc-iii.git] / arch / arm / boot / dts / imx28.dtsi
blobbbe52150b1655954187ea764d6e1e8f4a93464cf
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright 2012 Freescale Semiconductor, Inc.
5 #include <dt-bindings/gpio/gpio.h>
6 #include "imx28-pinfunc.h"
8 / {
9         #address-cells = <1>;
10         #size-cells = <1>;
12         interrupt-parent = <&icoll>;
13         /*
14          * The decompressor and also some bootloaders rely on a
15          * pre-existing /chosen node to be available to insert the
16          * command line and merge other ATAGS info.
17          */
18         chosen {};
20         aliases {
21                 ethernet0 = &mac0;
22                 ethernet1 = &mac1;
23                 gpio0 = &gpio0;
24                 gpio1 = &gpio1;
25                 gpio2 = &gpio2;
26                 gpio3 = &gpio3;
27                 gpio4 = &gpio4;
28                 saif0 = &saif0;
29                 saif1 = &saif1;
30                 serial0 = &auart0;
31                 serial1 = &auart1;
32                 serial2 = &auart2;
33                 serial3 = &auart3;
34                 serial4 = &auart4;
35                 spi0 = &ssp1;
36                 spi1 = &ssp2;
37                 usbphy0 = &usbphy0;
38                 usbphy1 = &usbphy1;
39         };
41         cpus {
42                 #address-cells = <1>;
43                 #size-cells = <0>;
45                 cpu@0 {
46                         compatible = "arm,arm926ej-s";
47                         device_type = "cpu";
48                         reg = <0>;
49                 };
50         };
52         apb@80000000 {
53                 compatible = "simple-bus";
54                 #address-cells = <1>;
55                 #size-cells = <1>;
56                 reg = <0x80000000 0x80000>;
57                 ranges;
59                 apbh@80000000 {
60                         compatible = "simple-bus";
61                         #address-cells = <1>;
62                         #size-cells = <1>;
63                         reg = <0x80000000 0x3c900>;
64                         ranges;
66                         icoll: interrupt-controller@80000000 {
67                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
68                                 interrupt-controller;
69                                 #interrupt-cells = <1>;
70                                 reg = <0x80000000 0x2000>;
71                         };
73                         hsadc: hsadc@80002000 {
74                                 reg = <0x80002000 0x2000>;
75                                 interrupts = <13>;
76                                 dmas = <&dma_apbh 12>;
77                                 dma-names = "rx";
78                                 status = "disabled";
79                         };
81                         dma_apbh: dma-apbh@80004000 {
82                                 compatible = "fsl,imx28-dma-apbh";
83                                 reg = <0x80004000 0x2000>;
84                                 interrupts = <82 83 84 85
85                                               88 88 88 88
86                                               88 88 88 88
87                                               87 86 0 0>;
88                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
89                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
90                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
91                                                   "hsadc", "lcdif", "empty", "empty";
92                                 #dma-cells = <1>;
93                                 dma-channels = <16>;
94                                 clocks = <&clks 25>;
95                         };
97                         perfmon: perfmon@80006000 {
98                                 reg = <0x80006000 0x800>;
99                                 interrupts = <27>;
100                                 status = "disabled";
101                         };
103                         gpmi: nand-controller@8000c000 {
104                                 compatible = "fsl,imx28-gpmi-nand";
105                                 #address-cells = <1>;
106                                 #size-cells = <1>;
107                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
108                                 reg-names = "gpmi-nand", "bch";
109                                 interrupts = <41>;
110                                 interrupt-names = "bch";
111                                 clocks = <&clks 50>;
112                                 clock-names = "gpmi_io";
113                                 dmas = <&dma_apbh 4>;
114                                 dma-names = "rx-tx";
115                                 status = "disabled";
116                         };
118                         ssp0: spi@80010000 {
119                                 #address-cells = <1>;
120                                 #size-cells = <0>;
121                                 reg = <0x80010000 0x2000>;
122                                 interrupts = <96>;
123                                 clocks = <&clks 46>;
124                                 dmas = <&dma_apbh 0>;
125                                 dma-names = "rx-tx";
126                                 status = "disabled";
127                         };
129                         ssp1: spi@80012000 {
130                                 #address-cells = <1>;
131                                 #size-cells = <0>;
132                                 reg = <0x80012000 0x2000>;
133                                 interrupts = <97>;
134                                 clocks = <&clks 47>;
135                                 dmas = <&dma_apbh 1>;
136                                 dma-names = "rx-tx";
137                                 status = "disabled";
138                         };
140                         ssp2: spi@80014000 {
141                                 #address-cells = <1>;
142                                 #size-cells = <0>;
143                                 reg = <0x80014000 0x2000>;
144                                 interrupts = <98>;
145                                 clocks = <&clks 48>;
146                                 dmas = <&dma_apbh 2>;
147                                 dma-names = "rx-tx";
148                                 status = "disabled";
149                         };
151                         ssp3: spi@80016000 {
152                                 #address-cells = <1>;
153                                 #size-cells = <0>;
154                                 reg = <0x80016000 0x2000>;
155                                 interrupts = <99>;
156                                 clocks = <&clks 49>;
157                                 dmas = <&dma_apbh 3>;
158                                 dma-names = "rx-tx";
159                                 status = "disabled";
160                         };
162                         pinctrl: pinctrl@80018000 {
163                                 #address-cells = <1>;
164                                 #size-cells = <0>;
165                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
166                                 reg = <0x80018000 0x2000>;
168                                 gpio0: gpio@0 {
169                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
170                                         reg = <0>;
171                                         interrupts = <127>;
172                                         gpio-controller;
173                                         #gpio-cells = <2>;
174                                         interrupt-controller;
175                                         #interrupt-cells = <2>;
176                                 };
178                                 gpio1: gpio@1 {
179                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
180                                         reg = <1>;
181                                         interrupts = <126>;
182                                         gpio-controller;
183                                         #gpio-cells = <2>;
184                                         interrupt-controller;
185                                         #interrupt-cells = <2>;
186                                 };
188                                 gpio2: gpio@2 {
189                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
190                                         reg = <2>;
191                                         interrupts = <125>;
192                                         gpio-controller;
193                                         #gpio-cells = <2>;
194                                         interrupt-controller;
195                                         #interrupt-cells = <2>;
196                                 };
198                                 gpio3: gpio@3 {
199                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
200                                         reg = <3>;
201                                         interrupts = <124>;
202                                         gpio-controller;
203                                         #gpio-cells = <2>;
204                                         interrupt-controller;
205                                         #interrupt-cells = <2>;
206                                 };
208                                 gpio4: gpio@4 {
209                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
210                                         reg = <4>;
211                                         interrupts = <123>;
212                                         gpio-controller;
213                                         #gpio-cells = <2>;
214                                         interrupt-controller;
215                                         #interrupt-cells = <2>;
216                                 };
218                                 duart_pins_a: duart@0 {
219                                         reg = <0>;
220                                         fsl,pinmux-ids = <
221                                                 MX28_PAD_PWM0__DUART_RX
222                                                 MX28_PAD_PWM1__DUART_TX
223                                         >;
224                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
225                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
226                                         fsl,pull-up = <MXS_PULL_DISABLE>;
227                                 };
229                                 duart_pins_b: duart@1 {
230                                         reg = <1>;
231                                         fsl,pinmux-ids = <
232                                                 MX28_PAD_AUART0_CTS__DUART_RX
233                                                 MX28_PAD_AUART0_RTS__DUART_TX
234                                         >;
235                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
236                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
237                                         fsl,pull-up = <MXS_PULL_DISABLE>;
238                                 };
240                                 duart_4pins_a: duart-4pins@0 {
241                                         reg = <0>;
242                                         fsl,pinmux-ids = <
243                                                 MX28_PAD_AUART0_CTS__DUART_RX
244                                                 MX28_PAD_AUART0_RTS__DUART_TX
245                                                 MX28_PAD_AUART0_RX__DUART_CTS
246                                                 MX28_PAD_AUART0_TX__DUART_RTS
247                                         >;
248                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
249                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
250                                         fsl,pull-up = <MXS_PULL_DISABLE>;
251                                 };
253                                 gpmi_pins_a: gpmi-nand@0 {
254                                         reg = <0>;
255                                         fsl,pinmux-ids = <
256                                                 MX28_PAD_GPMI_D00__GPMI_D0
257                                                 MX28_PAD_GPMI_D01__GPMI_D1
258                                                 MX28_PAD_GPMI_D02__GPMI_D2
259                                                 MX28_PAD_GPMI_D03__GPMI_D3
260                                                 MX28_PAD_GPMI_D04__GPMI_D4
261                                                 MX28_PAD_GPMI_D05__GPMI_D5
262                                                 MX28_PAD_GPMI_D06__GPMI_D6
263                                                 MX28_PAD_GPMI_D07__GPMI_D7
264                                                 MX28_PAD_GPMI_CE0N__GPMI_CE0N
265                                                 MX28_PAD_GPMI_RDY0__GPMI_READY0
266                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
267                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
268                                                 MX28_PAD_GPMI_ALE__GPMI_ALE
269                                                 MX28_PAD_GPMI_CLE__GPMI_CLE
270                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
271                                         >;
272                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
273                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
274                                         fsl,pull-up = <MXS_PULL_DISABLE>;
275                                 };
277                                 gpmi_status_cfg: gpmi-status-cfg@0 {
278                                         reg = <0>;
279                                         fsl,pinmux-ids = <
280                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
281                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
282                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
283                                         >;
284                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
285                                 };
287                                 auart0_pins_a: auart0@0 {
288                                         reg = <0>;
289                                         fsl,pinmux-ids = <
290                                                 MX28_PAD_AUART0_RX__AUART0_RX
291                                                 MX28_PAD_AUART0_TX__AUART0_TX
292                                                 MX28_PAD_AUART0_CTS__AUART0_CTS
293                                                 MX28_PAD_AUART0_RTS__AUART0_RTS
294                                         >;
295                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
296                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
297                                         fsl,pull-up = <MXS_PULL_DISABLE>;
298                                 };
300                                 auart0_2pins_a: auart0-2pins@0 {
301                                         reg = <0>;
302                                         fsl,pinmux-ids = <
303                                                 MX28_PAD_AUART0_RX__AUART0_RX
304                                                 MX28_PAD_AUART0_TX__AUART0_TX
305                                         >;
306                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
307                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
308                                         fsl,pull-up = <MXS_PULL_DISABLE>;
309                                 };
311                                 auart1_pins_a: auart1@0 {
312                                         reg = <0>;
313                                         fsl,pinmux-ids = <
314                                                 MX28_PAD_AUART1_RX__AUART1_RX
315                                                 MX28_PAD_AUART1_TX__AUART1_TX
316                                                 MX28_PAD_AUART1_CTS__AUART1_CTS
317                                                 MX28_PAD_AUART1_RTS__AUART1_RTS
318                                         >;
319                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
320                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
321                                         fsl,pull-up = <MXS_PULL_DISABLE>;
322                                 };
324                                 auart1_2pins_a: auart1-2pins@0 {
325                                         reg = <0>;
326                                         fsl,pinmux-ids = <
327                                                 MX28_PAD_AUART1_RX__AUART1_RX
328                                                 MX28_PAD_AUART1_TX__AUART1_TX
329                                         >;
330                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
331                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
332                                         fsl,pull-up = <MXS_PULL_DISABLE>;
333                                 };
335                                 auart2_2pins_a: auart2-2pins@0 {
336                                         reg = <0>;
337                                         fsl,pinmux-ids = <
338                                                 MX28_PAD_SSP2_SCK__AUART2_RX
339                                                 MX28_PAD_SSP2_MOSI__AUART2_TX
340                                         >;
341                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
342                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
343                                         fsl,pull-up = <MXS_PULL_DISABLE>;
344                                 };
346                                 auart2_2pins_b: auart2-2pins@1 {
347                                         reg = <1>;
348                                         fsl,pinmux-ids = <
349                                                 MX28_PAD_AUART2_RX__AUART2_RX
350                                                 MX28_PAD_AUART2_TX__AUART2_TX
351                                         >;
352                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
353                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
354                                         fsl,pull-up = <MXS_PULL_DISABLE>;
355                                 };
357                                 auart2_pins_a: auart2-pins@0 {
358                                         reg = <0>;
359                                         fsl,pinmux-ids = <
360                                                 MX28_PAD_AUART2_RX__AUART2_RX
361                                                 MX28_PAD_AUART2_TX__AUART2_TX
362                                                 MX28_PAD_AUART2_CTS__AUART2_CTS
363                                                 MX28_PAD_AUART2_RTS__AUART2_RTS
364                                         >;
365                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
366                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
367                                         fsl,pull-up = <MXS_PULL_DISABLE>;
368                                 };
370                                 auart3_pins_a: auart3@0 {
371                                         reg = <0>;
372                                         fsl,pinmux-ids = <
373                                                 MX28_PAD_AUART3_RX__AUART3_RX
374                                                 MX28_PAD_AUART3_TX__AUART3_TX
375                                                 MX28_PAD_AUART3_CTS__AUART3_CTS
376                                                 MX28_PAD_AUART3_RTS__AUART3_RTS
377                                         >;
378                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
379                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
380                                         fsl,pull-up = <MXS_PULL_DISABLE>;
381                                 };
383                                 auart3_2pins_a: auart3-2pins@0 {
384                                         reg = <0>;
385                                         fsl,pinmux-ids = <
386                                                 MX28_PAD_SSP2_MISO__AUART3_RX
387                                                 MX28_PAD_SSP2_SS0__AUART3_TX
388                                         >;
389                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
390                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
391                                         fsl,pull-up = <MXS_PULL_DISABLE>;
392                                 };
394                                 auart3_2pins_b: auart3-2pins@1 {
395                                         reg = <1>;
396                                         fsl,pinmux-ids = <
397                                                 MX28_PAD_AUART3_RX__AUART3_RX
398                                                 MX28_PAD_AUART3_TX__AUART3_TX
399                                         >;
400                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
401                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
402                                         fsl,pull-up = <MXS_PULL_DISABLE>;
403                                 };
405                                 auart4_2pins_a: auart4@0 {
406                                         reg = <0>;
407                                         fsl,pinmux-ids = <
408                                                 MX28_PAD_SSP3_SCK__AUART4_TX
409                                                 MX28_PAD_SSP3_MOSI__AUART4_RX
410                                         >;
411                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
412                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
413                                         fsl,pull-up = <MXS_PULL_DISABLE>;
414                                 };
416                                 auart4_2pins_b: auart4@1 {
417                                         reg = <1>;
418                                         fsl,pinmux-ids = <
419                                                 MX28_PAD_AUART0_CTS__AUART4_RX
420                                                 MX28_PAD_AUART0_RTS__AUART4_TX
421                                         >;
422                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
423                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
424                                         fsl,pull-up = <MXS_PULL_DISABLE>;
425                                 };
427                                 mac0_pins_a: mac0@0 {
428                                         reg = <0>;
429                                         fsl,pinmux-ids = <
430                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
431                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
432                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
433                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
434                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
435                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
436                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
437                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
438                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
439                                         >;
440                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
441                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
442                                         fsl,pull-up = <MXS_PULL_ENABLE>;
443                                 };
445                                 mac0_pins_b: mac0@1 {
446                                         reg = <1>;
447                                         fsl,pinmux-ids = <
448                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
449                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
450                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
451                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
452                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
453                                                 MX28_PAD_ENET0_RXD2__ENET0_RXD2
454                                                 MX28_PAD_ENET0_RXD3__ENET0_RXD3
455                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
456                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
457                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
458                                                 MX28_PAD_ENET0_TXD2__ENET0_TXD2
459                                                 MX28_PAD_ENET0_TXD3__ENET0_TXD3
460                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
461                                                 MX28_PAD_ENET0_COL__ENET0_COL
462                                                 MX28_PAD_ENET0_CRS__ENET0_CRS
463                                                 MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
464                                                 MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
465                                                 >;
466                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
467                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
468                                         fsl,pull-up = <MXS_PULL_ENABLE>;
469                                 };
471                                 mac1_pins_a: mac1@0 {
472                                         reg = <0>;
473                                         fsl,pinmux-ids = <
474                                                 MX28_PAD_ENET0_CRS__ENET1_RX_EN
475                                                 MX28_PAD_ENET0_RXD2__ENET1_RXD0
476                                                 MX28_PAD_ENET0_RXD3__ENET1_RXD1
477                                                 MX28_PAD_ENET0_COL__ENET1_TX_EN
478                                                 MX28_PAD_ENET0_TXD2__ENET1_TXD0
479                                                 MX28_PAD_ENET0_TXD3__ENET1_TXD1
480                                         >;
481                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
482                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
483                                         fsl,pull-up = <MXS_PULL_ENABLE>;
484                                 };
486                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
487                                         reg = <0>;
488                                         fsl,pinmux-ids = <
489                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
490                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
491                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
492                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
493                                                 MX28_PAD_SSP0_DATA4__SSP0_D4
494                                                 MX28_PAD_SSP0_DATA5__SSP0_D5
495                                                 MX28_PAD_SSP0_DATA6__SSP0_D6
496                                                 MX28_PAD_SSP0_DATA7__SSP0_D7
497                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
498                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
499                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
500                                         >;
501                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
502                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
503                                         fsl,pull-up = <MXS_PULL_ENABLE>;
504                                 };
506                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
507                                         reg = <0>;
508                                         fsl,pinmux-ids = <
509                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
510                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
511                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
512                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
513                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
514                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
515                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
516                                         >;
517                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
518                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
519                                         fsl,pull-up = <MXS_PULL_ENABLE>;
520                                 };
522                                 mmc0_cd_cfg: mmc0-cd-cfg@0 {
523                                         reg = <0>;
524                                         fsl,pinmux-ids = <
525                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
526                                         >;
527                                         fsl,pull-up = <MXS_PULL_DISABLE>;
528                                 };
530                                 mmc0_sck_cfg: mmc0-sck-cfg@0 {
531                                         reg = <0>;
532                                         fsl,pinmux-ids = <
533                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
534                                         >;
535                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
536                                         fsl,pull-up = <MXS_PULL_DISABLE>;
537                                 };
539                                 mmc1_4bit_pins_a: mmc1-4bit@0 {
540                                         reg = <0>;
541                                         fsl,pinmux-ids = <
542                                                 MX28_PAD_GPMI_D00__SSP1_D0
543                                                 MX28_PAD_GPMI_D01__SSP1_D1
544                                                 MX28_PAD_GPMI_D02__SSP1_D2
545                                                 MX28_PAD_GPMI_D03__SSP1_D3
546                                                 MX28_PAD_GPMI_RDY1__SSP1_CMD
547                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
548                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
549                                         >;
550                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
551                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
552                                         fsl,pull-up = <MXS_PULL_ENABLE>;
553                                 };
555                                 mmc1_cd_cfg: mmc1-cd-cfg@0 {
556                                         reg = <0>;
557                                         fsl,pinmux-ids = <
558                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
559                                         >;
560                                         fsl,pull-up = <MXS_PULL_DISABLE>;
561                                 };
563                                 mmc1_sck_cfg: mmc1-sck-cfg@0 {
564                                         reg = <0>;
565                                         fsl,pinmux-ids = <
566                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
567                                         >;
568                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
569                                         fsl,pull-up = <MXS_PULL_DISABLE>;
570                                 };
573                                 mmc2_4bit_pins_a: mmc2-4bit@0 {
574                                         reg = <0>;
575                                         fsl,pinmux-ids = <
576                                                 MX28_PAD_SSP0_DATA4__SSP2_D0
577                                                 MX28_PAD_SSP1_SCK__SSP2_D1
578                                                 MX28_PAD_SSP1_CMD__SSP2_D2
579                                                 MX28_PAD_SSP0_DATA5__SSP2_D3
580                                                 MX28_PAD_SSP0_DATA6__SSP2_CMD
581                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
582                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
583                                         >;
584                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
585                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
586                                         fsl,pull-up = <MXS_PULL_ENABLE>;
587                                 };
589                                 mmc2_4bit_pins_b: mmc2-4bit@1 {
590                                         reg = <1>;
591                                         fsl,pinmux-ids = <
592                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
593                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
594                                                 MX28_PAD_SSP2_MISO__SSP2_D0
595                                                 MX28_PAD_SSP2_SS0__SSP2_D3
596                                                 MX28_PAD_SSP2_SS1__SSP2_D1
597                                                 MX28_PAD_SSP2_SS2__SSP2_D2
598                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
599                                         >;
600                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
601                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
602                                         fsl,pull-up = <MXS_PULL_ENABLE>;
603                                 };
605                                 mmc2_cd_cfg: mmc2-cd-cfg@0 {
606                                         reg = <0>;
607                                         fsl,pinmux-ids = <
608                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
609                                         >;
610                                         fsl,pull-up = <MXS_PULL_DISABLE>;
611                                 };
613                                 mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
614                                         reg = <0>;
615                                         fsl,pinmux-ids = <
616                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
617                                         >;
618                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
619                                         fsl,pull-up = <MXS_PULL_DISABLE>;
620                                 };
622                                 mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
623                                         reg = <1>;
624                                         fsl,pinmux-ids = <
625                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
626                                         >;
627                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
628                                         fsl,pull-up = <MXS_PULL_DISABLE>;
629                                 };
631                                 i2c0_pins_a: i2c0@0 {
632                                         reg = <0>;
633                                         fsl,pinmux-ids = <
634                                                 MX28_PAD_I2C0_SCL__I2C0_SCL
635                                                 MX28_PAD_I2C0_SDA__I2C0_SDA
636                                         >;
637                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
638                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
639                                         fsl,pull-up = <MXS_PULL_ENABLE>;
640                                 };
642                                 i2c0_pins_b: i2c0@1 {
643                                         reg = <1>;
644                                         fsl,pinmux-ids = <
645                                                 MX28_PAD_AUART0_RX__I2C0_SCL
646                                                 MX28_PAD_AUART0_TX__I2C0_SDA
647                                         >;
648                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
649                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
650                                         fsl,pull-up = <MXS_PULL_ENABLE>;
651                                 };
653                                 i2c1_pins_a: i2c1@0 {
654                                         reg = <0>;
655                                         fsl,pinmux-ids = <
656                                                 MX28_PAD_PWM0__I2C1_SCL
657                                                 MX28_PAD_PWM1__I2C1_SDA
658                                         >;
659                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
660                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
661                                         fsl,pull-up = <MXS_PULL_ENABLE>;
662                                 };
664                                 i2c1_pins_b: i2c1@1 {
665                                         reg = <1>;
666                                         fsl,pinmux-ids = <
667                                                 MX28_PAD_AUART2_CTS__I2C1_SCL
668                                                 MX28_PAD_AUART2_RTS__I2C1_SDA
669                                         >;
670                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
671                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
672                                         fsl,pull-up = <MXS_PULL_ENABLE>;
673                                 };
675                                 saif0_pins_a: saif0@0 {
676                                         reg = <0>;
677                                         fsl,pinmux-ids = <
678                                                 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
679                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
680                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
681                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
682                                         >;
683                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
684                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
685                                         fsl,pull-up = <MXS_PULL_ENABLE>;
686                                 };
688                                 saif0_pins_b: saif0@1 {
689                                         reg = <1>;
690                                         fsl,pinmux-ids = <
691                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
692                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
693                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
694                                         >;
695                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
696                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
697                                         fsl,pull-up = <MXS_PULL_ENABLE>;
698                                 };
700                                 saif1_pins_a: saif1@0 {
701                                         reg = <0>;
702                                         fsl,pinmux-ids = <
703                                                 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
704                                         >;
705                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
706                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
707                                         fsl,pull-up = <MXS_PULL_ENABLE>;
708                                 };
710                                 pwm0_pins_a: pwm0@0 {
711                                         reg = <0>;
712                                         fsl,pinmux-ids = <
713                                                 MX28_PAD_PWM0__PWM_0
714                                         >;
715                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
716                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
717                                         fsl,pull-up = <MXS_PULL_DISABLE>;
718                                 };
720                                 pwm2_pins_a: pwm2@0 {
721                                         reg = <0>;
722                                         fsl,pinmux-ids = <
723                                                 MX28_PAD_PWM2__PWM_2
724                                         >;
725                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
726                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
727                                         fsl,pull-up = <MXS_PULL_DISABLE>;
728                                 };
730                                 pwm3_pins_a: pwm3@0 {
731                                         reg = <0>;
732                                         fsl,pinmux-ids = <
733                                                 MX28_PAD_PWM3__PWM_3
734                                         >;
735                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
736                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
737                                         fsl,pull-up = <MXS_PULL_DISABLE>;
738                                 };
740                                 pwm3_pins_b: pwm3@1 {
741                                         reg = <1>;
742                                         fsl,pinmux-ids = <
743                                                 MX28_PAD_SAIF0_MCLK__PWM_3
744                                         >;
745                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
746                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
747                                         fsl,pull-up = <MXS_PULL_DISABLE>;
748                                 };
750                                 pwm4_pins_a: pwm4@0 {
751                                         reg = <0>;
752                                         fsl,pinmux-ids = <
753                                                 MX28_PAD_PWM4__PWM_4
754                                         >;
755                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
756                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
757                                         fsl,pull-up = <MXS_PULL_DISABLE>;
758                                 };
760                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
761                                         reg = <0>;
762                                         fsl,pinmux-ids = <
763                                                 MX28_PAD_LCD_D00__LCD_D0
764                                                 MX28_PAD_LCD_D01__LCD_D1
765                                                 MX28_PAD_LCD_D02__LCD_D2
766                                                 MX28_PAD_LCD_D03__LCD_D3
767                                                 MX28_PAD_LCD_D04__LCD_D4
768                                                 MX28_PAD_LCD_D05__LCD_D5
769                                                 MX28_PAD_LCD_D06__LCD_D6
770                                                 MX28_PAD_LCD_D07__LCD_D7
771                                                 MX28_PAD_LCD_D08__LCD_D8
772                                                 MX28_PAD_LCD_D09__LCD_D9
773                                                 MX28_PAD_LCD_D10__LCD_D10
774                                                 MX28_PAD_LCD_D11__LCD_D11
775                                                 MX28_PAD_LCD_D12__LCD_D12
776                                                 MX28_PAD_LCD_D13__LCD_D13
777                                                 MX28_PAD_LCD_D14__LCD_D14
778                                                 MX28_PAD_LCD_D15__LCD_D15
779                                                 MX28_PAD_LCD_D16__LCD_D16
780                                                 MX28_PAD_LCD_D17__LCD_D17
781                                                 MX28_PAD_LCD_D18__LCD_D18
782                                                 MX28_PAD_LCD_D19__LCD_D19
783                                                 MX28_PAD_LCD_D20__LCD_D20
784                                                 MX28_PAD_LCD_D21__LCD_D21
785                                                 MX28_PAD_LCD_D22__LCD_D22
786                                                 MX28_PAD_LCD_D23__LCD_D23
787                                         >;
788                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
789                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
790                                         fsl,pull-up = <MXS_PULL_DISABLE>;
791                                 };
793                                 lcdif_18bit_pins_a: lcdif-18bit@0 {
794                                         reg = <0>;
795                                         fsl,pinmux-ids = <
796                                                 MX28_PAD_LCD_D00__LCD_D0
797                                                 MX28_PAD_LCD_D01__LCD_D1
798                                                 MX28_PAD_LCD_D02__LCD_D2
799                                                 MX28_PAD_LCD_D03__LCD_D3
800                                                 MX28_PAD_LCD_D04__LCD_D4
801                                                 MX28_PAD_LCD_D05__LCD_D5
802                                                 MX28_PAD_LCD_D06__LCD_D6
803                                                 MX28_PAD_LCD_D07__LCD_D7
804                                                 MX28_PAD_LCD_D08__LCD_D8
805                                                 MX28_PAD_LCD_D09__LCD_D9
806                                                 MX28_PAD_LCD_D10__LCD_D10
807                                                 MX28_PAD_LCD_D11__LCD_D11
808                                                 MX28_PAD_LCD_D12__LCD_D12
809                                                 MX28_PAD_LCD_D13__LCD_D13
810                                                 MX28_PAD_LCD_D14__LCD_D14
811                                                 MX28_PAD_LCD_D15__LCD_D15
812                                                 MX28_PAD_LCD_D16__LCD_D16
813                                                 MX28_PAD_LCD_D17__LCD_D17
814                                         >;
815                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
816                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
817                                         fsl,pull-up = <MXS_PULL_DISABLE>;
818                                 };
820                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
821                                         reg = <0>;
822                                         fsl,pinmux-ids = <
823                                                 MX28_PAD_LCD_D00__LCD_D0
824                                                 MX28_PAD_LCD_D01__LCD_D1
825                                                 MX28_PAD_LCD_D02__LCD_D2
826                                                 MX28_PAD_LCD_D03__LCD_D3
827                                                 MX28_PAD_LCD_D04__LCD_D4
828                                                 MX28_PAD_LCD_D05__LCD_D5
829                                                 MX28_PAD_LCD_D06__LCD_D6
830                                                 MX28_PAD_LCD_D07__LCD_D7
831                                                 MX28_PAD_LCD_D08__LCD_D8
832                                                 MX28_PAD_LCD_D09__LCD_D9
833                                                 MX28_PAD_LCD_D10__LCD_D10
834                                                 MX28_PAD_LCD_D11__LCD_D11
835                                                 MX28_PAD_LCD_D12__LCD_D12
836                                                 MX28_PAD_LCD_D13__LCD_D13
837                                                 MX28_PAD_LCD_D14__LCD_D14
838                                                 MX28_PAD_LCD_D15__LCD_D15
839                                         >;
840                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
841                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
842                                         fsl,pull-up = <MXS_PULL_DISABLE>;
843                                 };
845                                 lcdif_sync_pins_a: lcdif-sync@0 {
846                                         reg = <0>;
847                                         fsl,pinmux-ids = <
848                                                 MX28_PAD_LCD_RS__LCD_DOTCLK
849                                                 MX28_PAD_LCD_CS__LCD_ENABLE
850                                                 MX28_PAD_LCD_RD_E__LCD_VSYNC
851                                                 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
852                                         >;
853                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
854                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
855                                         fsl,pull-up = <MXS_PULL_DISABLE>;
856                                 };
858                                 can0_pins_a: can0@0 {
859                                         reg = <0>;
860                                         fsl,pinmux-ids = <
861                                                 MX28_PAD_GPMI_RDY2__CAN0_TX
862                                                 MX28_PAD_GPMI_RDY3__CAN0_RX
863                                         >;
864                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
865                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
866                                         fsl,pull-up = <MXS_PULL_DISABLE>;
867                                 };
869                                 can1_pins_a: can1@0 {
870                                         reg = <0>;
871                                         fsl,pinmux-ids = <
872                                                 MX28_PAD_GPMI_CE2N__CAN1_TX
873                                                 MX28_PAD_GPMI_CE3N__CAN1_RX
874                                         >;
875                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
876                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
877                                         fsl,pull-up = <MXS_PULL_DISABLE>;
878                                 };
880                                 spi2_pins_a: spi2@0 {
881                                         reg = <0>;
882                                         fsl,pinmux-ids = <
883                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
884                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
885                                                 MX28_PAD_SSP2_MISO__SSP2_D0
886                                                 MX28_PAD_SSP2_SS0__SSP2_D3
887                                         >;
888                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
889                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
890                                         fsl,pull-up = <MXS_PULL_ENABLE>;
891                                 };
893                                 spi3_pins_a: spi3@0 {
894                                         reg = <0>;
895                                         fsl,pinmux-ids = <
896                                                 MX28_PAD_AUART2_RX__SSP3_D4
897                                                 MX28_PAD_AUART2_TX__SSP3_D5
898                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
899                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
900                                                 MX28_PAD_SSP3_MISO__SSP3_D0
901                                                 MX28_PAD_SSP3_SS0__SSP3_D3
902                                         >;
903                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
904                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
905                                         fsl,pull-up = <MXS_PULL_DISABLE>;
906                                 };
908                                 spi3_pins_b: spi3@1 {
909                                         reg = <1>;
910                                         fsl,pinmux-ids = <
911                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
912                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
913                                                 MX28_PAD_SSP3_MISO__SSP3_D0
914                                                 MX28_PAD_SSP3_SS0__SSP3_D3
915                                         >;
916                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
917                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
918                                         fsl,pull-up = <MXS_PULL_ENABLE>;
919                                 };
921                                 usb0_pins_a: usb0@0 {
922                                         reg = <0>;
923                                         fsl,pinmux-ids = <
924                                                 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
925                                         >;
926                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
927                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
928                                         fsl,pull-up = <MXS_PULL_DISABLE>;
929                                 };
931                                 usb0_pins_b: usb0@1 {
932                                         reg = <1>;
933                                         fsl,pinmux-ids = <
934                                                 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
935                                         >;
936                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
937                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
938                                         fsl,pull-up = <MXS_PULL_DISABLE>;
939                                 };
941                                 usb1_pins_a: usb1@0 {
942                                         reg = <0>;
943                                         fsl,pinmux-ids = <
944                                                 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
945                                         >;
946                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
947                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
948                                         fsl,pull-up = <MXS_PULL_DISABLE>;
949                                 };
951                                 usb0_id_pins_a: usb0id@0 {
952                                         reg = <0>;
953                                         fsl,pinmux-ids = <
954                                                 MX28_PAD_AUART1_RTS__USB0_ID
955                                         >;
956                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
957                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
958                                         fsl,pull-up = <MXS_PULL_ENABLE>;
959                                 };
961                                 usb0_id_pins_b: usb0id1@0 {
962                                         reg = <0>;
963                                         fsl,pinmux-ids = <
964                                                 MX28_PAD_PWM2__USB0_ID
965                                         >;
966                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
967                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
968                                         fsl,pull-up = <MXS_PULL_ENABLE>;
969                                 };
971                         };
973                         digctl: digctl@8001c000 {
974                                 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
975                                 reg = <0x8001c000 0x2000>;
976                                 interrupts = <89>;
977                                 status = "disabled";
978                         };
980                         etm: etm@80022000 {
981                                 reg = <0x80022000 0x2000>;
982                                 status = "disabled";
983                         };
985                         dma_apbx: dma-apbx@80024000 {
986                                 compatible = "fsl,imx28-dma-apbx";
987                                 reg = <0x80024000 0x2000>;
988                                 interrupts = <78 79 66 0
989                                               80 81 68 69
990                                               70 71 72 73
991                                               74 75 76 77>;
992                                 interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
993                                                   "saif0", "saif1", "i2c0", "i2c1",
994                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
995                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
996                                 #dma-cells = <1>;
997                                 dma-channels = <16>;
998                                 clocks = <&clks 26>;
999                         };
1001                         dcp: crypto@80028000 {
1002                                 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
1003                                 reg = <0x80028000 0x2000>;
1004                                 interrupts = <52 53 54>;
1005                                 status = "okay";
1006                         };
1008                         pxp: pxp@8002a000 {
1009                                 reg = <0x8002a000 0x2000>;
1010                                 interrupts = <39>;
1011                                 status = "disabled";
1012                         };
1014                         ocotp: efuse@8002c000 {
1015                                 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
1016                                 #address-cells = <1>;
1017                                 #size-cells = <1>;
1018                                 reg = <0x8002c000 0x2000>;
1019                                 clocks = <&clks 25>;
1020                         };
1022                         axi-ahb@8002e000 {
1023                                 reg = <0x8002e000 0x2000>;
1024                                 status = "disabled";
1025                         };
1027                         lcdif: lcdif@80030000 {
1028                                 compatible = "fsl,imx28-lcdif";
1029                                 reg = <0x80030000 0x2000>;
1030                                 interrupts = <38>;
1031                                 clocks = <&clks 55>;
1032                                 dmas = <&dma_apbh 13>;
1033                                 dma-names = "rx";
1034                                 status = "disabled";
1035                         };
1037                         can0: can@80032000 {
1038                                 compatible = "fsl,imx28-flexcan";
1039                                 reg = <0x80032000 0x2000>;
1040                                 interrupts = <8>;
1041                                 clocks = <&clks 58>, <&clks 58>;
1042                                 clock-names = "ipg", "per";
1043                                 status = "disabled";
1044                         };
1046                         can1: can@80034000 {
1047                                 compatible = "fsl,imx28-flexcan";
1048                                 reg = <0x80034000 0x2000>;
1049                                 interrupts = <9>;
1050                                 clocks = <&clks 59>, <&clks 59>;
1051                                 clock-names = "ipg", "per";
1052                                 status = "disabled";
1053                         };
1055                         simdbg: simdbg@8003c000 {
1056                                 reg = <0x8003c000 0x200>;
1057                                 status = "disabled";
1058                         };
1060                         simgpmisel: simgpmisel@8003c200 {
1061                                 reg = <0x8003c200 0x100>;
1062                                 status = "disabled";
1063                         };
1065                         simsspsel: simsspsel@8003c300 {
1066                                 reg = <0x8003c300 0x100>;
1067                                 status = "disabled";
1068                         };
1070                         simmemsel: simmemsel@8003c400 {
1071                                 reg = <0x8003c400 0x100>;
1072                                 status = "disabled";
1073                         };
1075                         gpiomon: gpiomon@8003c500 {
1076                                 reg = <0x8003c500 0x100>;
1077                                 status = "disabled";
1078                         };
1080                         simenet: simenet@8003c700 {
1081                                 reg = <0x8003c700 0x100>;
1082                                 status = "disabled";
1083                         };
1085                         armjtag: armjtag@8003c800 {
1086                                 reg = <0x8003c800 0x100>;
1087                                 status = "disabled";
1088                         };
1089                 };
1091                 apbx@80040000 {
1092                         compatible = "simple-bus";
1093                         #address-cells = <1>;
1094                         #size-cells = <1>;
1095                         reg = <0x80040000 0x40000>;
1096                         ranges;
1098                         clks: clkctrl@80040000 {
1099                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1100                                 reg = <0x80040000 0x2000>;
1101                                 #clock-cells = <1>;
1102                         };
1104                         saif0: saif@80042000 {
1105                                 #sound-dai-cells = <0>;
1106                                 compatible = "fsl,imx28-saif";
1107                                 reg = <0x80042000 0x2000>;
1108                                 interrupts = <59>;
1109                                 #clock-cells = <0>;
1110                                 clocks = <&clks 53>;
1111                                 dmas = <&dma_apbx 4>;
1112                                 dma-names = "rx-tx";
1113                                 status = "disabled";
1114                         };
1116                         power: power@80044000 {
1117                                 reg = <0x80044000 0x2000>;
1118                                 status = "disabled";
1119                         };
1121                         saif1: saif@80046000 {
1122                                 #sound-dai-cells = <0>;
1123                                 compatible = "fsl,imx28-saif";
1124                                 reg = <0x80046000 0x2000>;
1125                                 interrupts = <58>;
1126                                 clocks = <&clks 54>;
1127                                 dmas = <&dma_apbx 5>;
1128                                 dma-names = "rx-tx";
1129                                 status = "disabled";
1130                         };
1132                         lradc: lradc@80050000 {
1133                                 compatible = "fsl,imx28-lradc";
1134                                 reg = <0x80050000 0x2000>;
1135                                 interrupts = <10 14 15 16 17 18 19
1136                                                 20 21 22 23 24 25>;
1137                                 status = "disabled";
1138                                 clocks = <&clks 41>;
1139                                 #io-channel-cells = <1>;
1140                         };
1142                         spdif: spdif@80054000 {
1143                                 reg = <0x80054000 0x2000>;
1144                                 interrupts = <45>;
1145                                 dmas = <&dma_apbx 2>;
1146                                 dma-names = "tx";
1147                                 status = "disabled";
1148                         };
1150                         mxs_rtc: rtc@80056000 {
1151                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1152                                 reg = <0x80056000 0x2000>;
1153                                 interrupts = <29>;
1154                         };
1156                         i2c0: i2c@80058000 {
1157                                 #address-cells = <1>;
1158                                 #size-cells = <0>;
1159                                 compatible = "fsl,imx28-i2c";
1160                                 reg = <0x80058000 0x2000>;
1161                                 interrupts = <111>;
1162                                 clock-frequency = <100000>;
1163                                 dmas = <&dma_apbx 6>;
1164                                 dma-names = "rx-tx";
1165                                 status = "disabled";
1166                         };
1168                         i2c1: i2c@8005a000 {
1169                                 #address-cells = <1>;
1170                                 #size-cells = <0>;
1171                                 compatible = "fsl,imx28-i2c";
1172                                 reg = <0x8005a000 0x2000>;
1173                                 interrupts = <110>;
1174                                 clock-frequency = <100000>;
1175                                 dmas = <&dma_apbx 7>;
1176                                 dma-names = "rx-tx";
1177                                 status = "disabled";
1178                         };
1180                         pwm: pwm@80064000 {
1181                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1182                                 reg = <0x80064000 0x2000>;
1183                                 clocks = <&clks 44>;
1184                                 #pwm-cells = <2>;
1185                                 fsl,pwm-number = <8>;
1186                                 status = "disabled";
1187                         };
1189                         timer: timrot@80068000 {
1190                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
1191                                 reg = <0x80068000 0x2000>;
1192                                 interrupts = <48 49 50 51>;
1193                                 clocks = <&clks 26>;
1194                         };
1196                         auart0: serial@8006a000 {
1197                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1198                                 reg = <0x8006a000 0x2000>;
1199                                 interrupts = <112>;
1200                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1201                                 dma-names = "rx", "tx";
1202                                 clocks = <&clks 45>;
1203                                 status = "disabled";
1204                         };
1206                         auart1: serial@8006c000 {
1207                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1208                                 reg = <0x8006c000 0x2000>;
1209                                 interrupts = <113>;
1210                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1211                                 dma-names = "rx", "tx";
1212                                 clocks = <&clks 45>;
1213                                 status = "disabled";
1214                         };
1216                         auart2: serial@8006e000 {
1217                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1218                                 reg = <0x8006e000 0x2000>;
1219                                 interrupts = <114>;
1220                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1221                                 dma-names = "rx", "tx";
1222                                 clocks = <&clks 45>;
1223                                 status = "disabled";
1224                         };
1226                         auart3: serial@80070000 {
1227                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1228                                 reg = <0x80070000 0x2000>;
1229                                 interrupts = <115>;
1230                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1231                                 dma-names = "rx", "tx";
1232                                 clocks = <&clks 45>;
1233                                 status = "disabled";
1234                         };
1236                         auart4: serial@80072000 {
1237                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1238                                 reg = <0x80072000 0x2000>;
1239                                 interrupts = <116>;
1240                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1241                                 dma-names = "rx", "tx";
1242                                 clocks = <&clks 45>;
1243                                 status = "disabled";
1244                         };
1246                         duart: serial@80074000 {
1247                                 compatible = "arm,pl011", "arm,primecell";
1248                                 reg = <0x80074000 0x1000>;
1249                                 interrupts = <47>;
1250                                 clocks = <&clks 45>, <&clks 26>;
1251                                 clock-names = "uart", "apb_pclk";
1252                                 status = "disabled";
1253                         };
1255                         usbphy0: usbphy@8007c000 {
1256                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1257                                 reg = <0x8007c000 0x2000>;
1258                                 clocks = <&clks 62>;
1259                                 status = "disabled";
1260                         };
1262                         usbphy1: usbphy@8007e000 {
1263                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1264                                 reg = <0x8007e000 0x2000>;
1265                                 clocks = <&clks 63>;
1266                                 status = "disabled";
1267                         };
1268                 };
1269         };
1271         ahb@80080000 {
1272                 compatible = "simple-bus";
1273                 #address-cells = <1>;
1274                 #size-cells = <1>;
1275                 reg = <0x80080000 0x80000>;
1276                 ranges;
1278                 usb0: usb@80080000 {
1279                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1280                         reg = <0x80080000 0x10000>;
1281                         interrupts = <93>;
1282                         clocks = <&clks 60>;
1283                         fsl,usbphy = <&usbphy0>;
1284                         status = "disabled";
1285                 };
1287                 usb1: usb@80090000 {
1288                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1289                         reg = <0x80090000 0x10000>;
1290                         interrupts = <92>;
1291                         clocks = <&clks 61>;
1292                         fsl,usbphy = <&usbphy1>;
1293                         dr_mode = "host";
1294                         status = "disabled";
1295                 };
1297                 dflpt: dflpt@800c0000 {
1298                         reg = <0x800c0000 0x10000>;
1299                         status = "disabled";
1300                 };
1302                 mac0: ethernet@800f0000 {
1303                         compatible = "fsl,imx28-fec";
1304                         reg = <0x800f0000 0x4000>;
1305                         interrupts = <101>;
1306                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1307                         clock-names = "ipg", "ahb", "enet_out";
1308                         status = "disabled";
1309                 };
1311                 mac1: ethernet@800f4000 {
1312                         compatible = "fsl,imx28-fec";
1313                         reg = <0x800f4000 0x4000>;
1314                         interrupts = <102>;
1315                         clocks = <&clks 57>, <&clks 57>;
1316                         clock-names = "ipg", "ahb";
1317                         status = "disabled";
1318                 };
1320                 eth_switch: switch@800f8000 {
1321                         reg = <0x800f8000 0x8000>;
1322                         status = "disabled";
1323                 };
1324         };
1326         iio-hwmon {
1327                 compatible = "iio-hwmon";
1328                 io-channels = <&lradc 8>;
1329         };