WIP FPC-III support
[linux/fpc-iii.git] / arch / arm / boot / dts / zynq-zc770-xm010.dts
blob0dd352289a45e58150f75896a590873f66773174
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Xilinx ZC770 XM010 board DTS
4  *
5  * Copyright (C) 2013-2018 Xilinx, Inc.
6  */
7 /dts-v1/;
8 #include "zynq-7000.dtsi"
10 / {
11         model = "Xilinx ZC770 XM010 board";
12         compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
14         aliases {
15                 ethernet0 = &gem0;
16                 i2c0 = &i2c0;
17                 serial0 = &uart1;
18                 spi1 = &spi1;
19         };
21         chosen {
22                 bootargs = "";
23                 stdout-path = "serial0:115200n8";
24         };
26         memory@0 {
27                 device_type = "memory";
28                 reg = <0x0 0x40000000>;
29         };
31         usb_phy0: phy0 {
32                 compatible = "usb-nop-xceiv";
33                 #phy-cells = <0>;
34         };
37 &can0 {
38         status = "okay";
41 &gem0 {
42         status = "okay";
43         phy-mode = "rgmii-id";
44         phy-handle = <&ethernet_phy>;
46         ethernet_phy: ethernet-phy@7 {
47                 reg = <7>;
48                 device_type = "ethernet-phy";
49         };
52 &i2c0 {
53         status = "okay";
54         clock-frequency = <400000>;
56         eeprom: eeprom@52 {
57                 compatible = "atmel,24c02";
58                 reg = <0x52>;
59         };
63 &sdhci0 {
64         status = "okay";
67 &spi1 {
68         status = "okay";
69         num-cs = <4>;
70         is-decoded-cs = <0>;
71         flash@1 {
72                 compatible = "sst25wf080", "jedec,spi-nor";
73                 reg = <1>;
74                 spi-max-frequency = <1000000>;
75                 partitions {
76                         compatible = "fixed-partitions";
77                         #address-cells = <1>;
78                         #size-cells = <1>;
79                         partition@0 {
80                                 label = "data";
81                                 reg = <0x0 0x100000>;
82                         };
83                 };
84         };
87 &uart1 {
88         status = "okay";
91 &usb0 {
92         status = "okay";
93         dr_mode = "host";
94         usb-phy = <&usb_phy0>;