WIP FPC-III support
[linux/fpc-iii.git] / arch / arm64 / boot / dts / amlogic / meson-gxbb.dtsi
blob7c029f552a23b3d5312c5c489425e6f848aa1b94
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3  * Copyright (c) 2016 Andreas Färber
4  */
6 #include "meson-gx.dtsi"
7 #include "meson-gx-mali450.dtsi"
8 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
9 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
10 #include <dt-bindings/clock/gxbb-clkc.h>
11 #include <dt-bindings/clock/gxbb-aoclkc.h>
12 #include <dt-bindings/reset/gxbb-aoclkc.h>
14 / {
15         compatible = "amlogic,meson-gxbb";
17         soc {
18                 usb0_phy: phy@c0000000 {
19                         compatible = "amlogic,meson-gxbb-usb2-phy";
20                         #phy-cells = <0>;
21                         reg = <0x0 0xc0000000 0x0 0x20>;
22                         resets = <&reset RESET_USB_OTG>;
23                         clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
24                         clock-names = "usb_general", "usb";
25                         status = "disabled";
26                 };
28                 usb1_phy: phy@c0000020 {
29                         compatible = "amlogic,meson-gxbb-usb2-phy";
30                         #phy-cells = <0>;
31                         reg = <0x0 0xc0000020 0x0 0x20>;
32                         resets = <&reset RESET_USB_OTG>;
33                         clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
34                         clock-names = "usb_general", "usb";
35                         status = "disabled";
36                 };
38                 usb0: usb@c9000000 {
39                         compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
40                         reg = <0x0 0xc9000000 0x0 0x40000>;
41                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
42                         clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
43                         clock-names = "otg";
44                         phys = <&usb0_phy>;
45                         phy-names = "usb2-phy";
46                         dr_mode = "host";
47                         status = "disabled";
48                 };
50                 usb1: usb@c9100000 {
51                         compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
52                         reg = <0x0 0xc9100000 0x0 0x40000>;
53                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
54                         clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
55                         clock-names = "otg";
56                         phys = <&usb1_phy>;
57                         phy-names = "usb2-phy";
58                         dr_mode = "host";
59                         status = "disabled";
60                 };
61         };
64 &aiu {
65         compatible = "amlogic,aiu-gxbb", "amlogic,aiu";
66         clocks = <&clkc CLKID_AIU_GLUE>,
67                  <&clkc CLKID_I2S_OUT>,
68                  <&clkc CLKID_AOCLK_GATE>,
69                  <&clkc CLKID_CTS_AMCLK>,
70                  <&clkc CLKID_MIXER_IFACE>,
71                  <&clkc CLKID_IEC958>,
72                  <&clkc CLKID_IEC958_GATE>,
73                  <&clkc CLKID_CTS_MCLK_I958>,
74                  <&clkc CLKID_CTS_I958>;
75         clock-names = "pclk",
76                       "i2s_pclk",
77                       "i2s_aoclk",
78                       "i2s_mclk",
79                       "i2s_mixer",
80                       "spdif_pclk",
81                       "spdif_aoclk",
82                       "spdif_mclk",
83                       "spdif_mclk_sel";
84         resets = <&reset RESET_AIU>;
87 &aobus {
88         pinctrl_aobus: pinctrl@14 {
89                 compatible = "amlogic,meson-gxbb-aobus-pinctrl";
90                 #address-cells = <2>;
91                 #size-cells = <2>;
92                 ranges;
94                 gpio_ao: bank@14 {
95                         reg = <0x0 0x00014 0x0 0x8>,
96                               <0x0 0x0002c 0x0 0x4>,
97                               <0x0 0x00024 0x0 0x8>;
98                         reg-names = "mux", "pull", "gpio";
99                         gpio-controller;
100                         #gpio-cells = <2>;
101                         gpio-ranges = <&pinctrl_aobus 0 0 14>;
102                 };
104                 uart_ao_a_pins: uart_ao_a {
105                         mux {
106                                 groups = "uart_tx_ao_a", "uart_rx_ao_a";
107                                 function = "uart_ao";
108                                 bias-disable;
109                         };
110                 };
112                 uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
113                         mux {
114                                 groups = "uart_cts_ao_a",
115                                        "uart_rts_ao_a";
116                                 function = "uart_ao";
117                                 bias-disable;
118                         };
119                 };
121                 uart_ao_b_pins: uart_ao_b {
122                         mux {
123                                 groups = "uart_tx_ao_b", "uart_rx_ao_b";
124                                 function = "uart_ao_b";
125                                 bias-disable;
126                         };
127                 };
129                 uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
130                         mux {
131                                 groups = "uart_cts_ao_b",
132                                        "uart_rts_ao_b";
133                                 function = "uart_ao_b";
134                                 bias-disable;
135                         };
136                 };
138                 remote_input_ao_pins: remote_input_ao {
139                         mux {
140                                 groups = "remote_input_ao";
141                                 function = "remote_input_ao";
142                                 bias-disable;
143                         };
144                 };
146                 i2c_ao_pins: i2c_ao {
147                         mux {
148                                 groups = "i2c_sck_ao",
149                                        "i2c_sda_ao";
150                                 function = "i2c_ao";
151                                 bias-disable;
152                         };
153                 };
155                 pwm_ao_a_3_pins: pwm_ao_a_3 {
156                         mux {
157                                 groups = "pwm_ao_a_3";
158                                 function = "pwm_ao_a_3";
159                                 bias-disable;
160                         };
161                 };
163                 pwm_ao_a_6_pins: pwm_ao_a_6 {
164                         mux {
165                                 groups = "pwm_ao_a_6";
166                                 function = "pwm_ao_a_6";
167                                 bias-disable;
168                         };
169                 };
171                 pwm_ao_a_12_pins: pwm_ao_a_12 {
172                         mux {
173                                 groups = "pwm_ao_a_12";
174                                 function = "pwm_ao_a_12";
175                                 bias-disable;
176                         };
177                 };
179                 pwm_ao_b_pins: pwm_ao_b {
180                         mux {
181                                 groups = "pwm_ao_b";
182                                 function = "pwm_ao_b";
183                                 bias-disable;
184                         };
185                 };
187                 i2s_am_clk_pins: i2s_am_clk {
188                         mux {
189                                 groups = "i2s_am_clk";
190                                 function = "i2s_out_ao";
191                                 bias-disable;
192                         };
193                 };
195                 i2s_out_ao_clk_pins: i2s_out_ao_clk {
196                         mux {
197                                 groups = "i2s_out_ao_clk";
198                                 function = "i2s_out_ao";
199                                 bias-disable;
200                         };
201                 };
203                 i2s_out_lr_clk_pins: i2s_out_lr_clk {
204                         mux {
205                                 groups = "i2s_out_lr_clk";
206                                 function = "i2s_out_ao";
207                                 bias-disable;
208                         };
209                 };
211                 i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
212                         mux {
213                                 groups = "i2s_out_ch01_ao";
214                                 function = "i2s_out_ao";
215                                 bias-disable;
216                         };
217                 };
219                 i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
220                         mux {
221                                 groups = "i2s_out_ch23_ao";
222                                 function = "i2s_out_ao";
223                                 bias-disable;
224                         };
225                 };
227                 i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
228                         mux {
229                                 groups = "i2s_out_ch45_ao";
230                                 function = "i2s_out_ao";
231                                 bias-disable;
232                         };
233                 };
235                 spdif_out_ao_6_pins: spdif_out_ao_6 {
236                         mux {
237                                 groups = "spdif_out_ao_6";
238                                 function = "spdif_out_ao";
239                         };
240                 };
242                 spdif_out_ao_13_pins: spdif_out_ao_13 {
243                         mux {
244                                 groups = "spdif_out_ao_13";
245                                 function = "spdif_out_ao";
246                                 bias-disable;
247                         };
248                 };
250                 ao_cec_pins: ao_cec {
251                         mux {
252                                 groups = "ao_cec";
253                                 function = "cec_ao";
254                                 bias-disable;
255                         };
256                 };
258                 ee_cec_pins: ee_cec {
259                         mux {
260                                 groups = "ee_cec";
261                                 function = "cec_ao";
262                                 bias-disable;
263                         };
264                 };
265         };
268 &cbus {
269         spifc: spi@8c80 {
270                 compatible = "amlogic,meson-gxbb-spifc";
271                 reg = <0x0 0x08c80 0x0 0x80>;
272                 #address-cells = <1>;
273                 #size-cells = <0>;
274                 clocks = <&clkc CLKID_SPI>;
275                 status = "disabled";
276         };
279 &cec_AO {
280         clocks = <&clkc_AO CLKID_AO_CEC_32K>;
281         clock-names = "core";
284 &clkc_AO {
285         compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
286         clocks = <&xtal>, <&clkc CLKID_CLK81>;
287         clock-names = "xtal", "mpeg-clk";
290 &efuse {
291         clocks = <&clkc CLKID_EFUSE>;
294 &ethmac {
295         clocks = <&clkc CLKID_ETH>,
296                  <&clkc CLKID_FCLK_DIV2>,
297                  <&clkc CLKID_MPLL2>,
298                  <&clkc CLKID_FCLK_DIV2>;
299         clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
302 &gpio_intc {
303         compatible = "amlogic,meson-gpio-intc",
304                      "amlogic,meson-gxbb-gpio-intc";
305         status = "okay";
308 &hdmi_tx {
309         compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
310         resets = <&reset RESET_HDMITX_CAPB3>,
311                  <&reset RESET_HDMI_SYSTEM_RESET>,
312                  <&reset RESET_HDMI_TX>;
313         reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
314         clocks = <&clkc CLKID_HDMI_PCLK>,
315                  <&clkc CLKID_CLK81>,
316                  <&clkc CLKID_GCLK_VENCI_INT0>;
317         clock-names = "isfr", "iahb", "venci";
320 &sysctrl {
321         clkc: clock-controller {
322                 compatible = "amlogic,gxbb-clkc";
323                 #clock-cells = <1>;
324                 clocks = <&xtal>;
325                 clock-names = "xtal";
326         };
329 &hwrng {
330         clocks = <&clkc CLKID_RNG0>;
331         clock-names = "core";
334 &i2c_A {
335         clocks = <&clkc CLKID_I2C>;
338 &i2c_AO {
339         clocks = <&clkc CLKID_AO_I2C>;
342 &i2c_B {
343         clocks = <&clkc CLKID_I2C>;
346 &i2c_C {
347         clocks = <&clkc CLKID_I2C>;
350 &mali {
351         compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
353         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
354         clock-names = "bus", "core";
356         assigned-clocks = <&clkc CLKID_GP0_PLL>;
357         assigned-clock-rates = <744000000>;
360 &periphs {
361         pinctrl_periphs: pinctrl@4b0 {
362                 compatible = "amlogic,meson-gxbb-periphs-pinctrl";
363                 #address-cells = <2>;
364                 #size-cells = <2>;
365                 ranges;
367                 gpio: bank@4b0 {
368                         reg = <0x0 0x004b0 0x0 0x28>,
369                               <0x0 0x004e8 0x0 0x14>,
370                               <0x0 0x00520 0x0 0x14>,
371                               <0x0 0x00430 0x0 0x40>;
372                         reg-names = "mux", "pull", "pull-enable", "gpio";
373                         gpio-controller;
374                         #gpio-cells = <2>;
375                         gpio-ranges = <&pinctrl_periphs 0 0 119>;
376                 };
378                 emmc_pins: emmc {
379                         mux-0 {
380                                 groups = "emmc_nand_d07",
381                                        "emmc_cmd";
382                                 function = "emmc";
383                                 bias-pull-up;
384                         };
386                         mux-1 {
387                                 groups = "emmc_clk";
388                                 function = "emmc";
389                                 bias-disable;
390                         };
391                 };
393                 emmc_ds_pins: emmc-ds {
394                         mux {
395                                 groups = "emmc_ds";
396                                 function = "emmc";
397                                 bias-pull-down;
398                         };
399                 };
401                 emmc_clk_gate_pins: emmc_clk_gate {
402                         mux {
403                                 groups = "BOOT_8";
404                                 function = "gpio_periphs";
405                                 bias-pull-down;
406                         };
407                 };
409                 nor_pins: nor {
410                         mux {
411                                 groups = "nor_d",
412                                        "nor_q",
413                                        "nor_c",
414                                        "nor_cs";
415                                 function = "nor";
416                                 bias-disable;
417                         };
418                 };
420                 spi_pins: spi-pins {
421                         mux {
422                                 groups = "spi_miso",
423                                         "spi_mosi",
424                                         "spi_sclk";
425                                 function = "spi";
426                                 bias-disable;
427                         };
428                 };
430                 spi_ss0_pins: spi-ss0 {
431                         mux {
432                                 groups = "spi_ss0";
433                                 function = "spi";
434                                 bias-disable;
435                         };
436                 };
438                 sdcard_pins: sdcard {
439                         mux-0 {
440                                 groups = "sdcard_d0",
441                                        "sdcard_d1",
442                                        "sdcard_d2",
443                                        "sdcard_d3",
444                                        "sdcard_cmd";
445                                 function = "sdcard";
446                                 bias-pull-up;
447                         };
449                         mux-1 {
450                                 groups = "sdcard_clk";
451                                 function = "sdcard";
452                                 bias-disable;
453                         };
454                 };
456                 sdcard_clk_gate_pins: sdcard_clk_gate {
457                         mux {
458                                 groups = "CARD_2";
459                                 function = "gpio_periphs";
460                                 bias-pull-down;
461                         };
462                 };
464                 sdio_pins: sdio {
465                         mux-0 {
466                                 groups = "sdio_d0",
467                                        "sdio_d1",
468                                        "sdio_d2",
469                                        "sdio_d3",
470                                        "sdio_cmd";
471                                 function = "sdio";
472                                 bias-pull-up;
473                         };
475                         mux-1 {
476                                 groups = "sdio_clk";
477                                 function = "sdio";
478                                 bias-disable;
479                         };
480                 };
482                 sdio_clk_gate_pins: sdio_clk_gate {
483                         mux {
484                                 groups = "GPIOX_4";
485                                 function = "gpio_periphs";
486                                 bias-pull-down;
487                         };
488                 };
490                 sdio_irq_pins: sdio_irq {
491                         mux {
492                                 groups = "sdio_irq";
493                                 function = "sdio";
494                                 bias-disable;
495                         };
496                 };
498                 uart_a_pins: uart_a {
499                         mux {
500                                 groups = "uart_tx_a",
501                                        "uart_rx_a";
502                                 function = "uart_a";
503                                 bias-disable;
504                         };
505                 };
507                 uart_a_cts_rts_pins: uart_a_cts_rts {
508                         mux {
509                                 groups = "uart_cts_a",
510                                        "uart_rts_a";
511                                 function = "uart_a";
512                                 bias-disable;
513                         };
514                 };
516                 uart_b_pins: uart_b {
517                         mux {
518                                 groups = "uart_tx_b",
519                                        "uart_rx_b";
520                                 function = "uart_b";
521                                 bias-disable;
522                         };
523                 };
525                 uart_b_cts_rts_pins: uart_b_cts_rts {
526                         mux {
527                                 groups = "uart_cts_b",
528                                        "uart_rts_b";
529                                 function = "uart_b";
530                                 bias-disable;
531                         };
532                 };
534                 uart_c_pins: uart_c {
535                         mux {
536                                 groups = "uart_tx_c",
537                                        "uart_rx_c";
538                                 function = "uart_c";
539                                 bias-disable;
540                         };
541                 };
543                 uart_c_cts_rts_pins: uart_c_cts_rts {
544                         mux {
545                                 groups = "uart_cts_c",
546                                        "uart_rts_c";
547                                 function = "uart_c";
548                                 bias-disable;
549                         };
550                 };
552                 i2c_a_pins: i2c_a {
553                         mux {
554                                 groups = "i2c_sck_a",
555                                        "i2c_sda_a";
556                                 function = "i2c_a";
557                                 bias-disable;
558                         };
559                 };
561                 i2c_b_pins: i2c_b {
562                         mux {
563                                 groups = "i2c_sck_b",
564                                        "i2c_sda_b";
565                                 function = "i2c_b";
566                                 bias-disable;
567                         };
568                 };
570                 i2c_c_pins: i2c_c {
571                         mux {
572                                 groups = "i2c_sck_c",
573                                        "i2c_sda_c";
574                                 function = "i2c_c";
575                                 bias-disable;
576                         };
577                 };
579                 eth_rgmii_pins: eth-rgmii {
580                         mux {
581                                 groups = "eth_mdio",
582                                        "eth_mdc",
583                                        "eth_clk_rx_clk",
584                                        "eth_rx_dv",
585                                        "eth_rxd0",
586                                        "eth_rxd1",
587                                        "eth_rxd2",
588                                        "eth_rxd3",
589                                        "eth_rgmii_tx_clk",
590                                        "eth_tx_en",
591                                        "eth_txd0",
592                                        "eth_txd1",
593                                        "eth_txd2",
594                                        "eth_txd3";
595                                 function = "eth";
596                                 bias-disable;
597                         };
598                 };
600                 eth_rmii_pins: eth-rmii {
601                         mux {
602                                 groups = "eth_mdio",
603                                        "eth_mdc",
604                                        "eth_clk_rx_clk",
605                                        "eth_rx_dv",
606                                        "eth_rxd0",
607                                        "eth_rxd1",
608                                        "eth_tx_en",
609                                        "eth_txd0",
610                                        "eth_txd1";
611                                 function = "eth";
612                                 bias-disable;
613                         };
614                 };
616                 pwm_a_x_pins: pwm_a_x {
617                         mux {
618                                 groups = "pwm_a_x";
619                                 function = "pwm_a_x";
620                                 bias-disable;
621                         };
622                 };
624                 pwm_a_y_pins: pwm_a_y {
625                         mux {
626                                 groups = "pwm_a_y";
627                                 function = "pwm_a_y";
628                                 bias-disable;
629                         };
630                 };
632                 pwm_b_pins: pwm_b {
633                         mux {
634                                 groups = "pwm_b";
635                                 function = "pwm_b";
636                                 bias-disable;
637                         };
638                 };
640                 pwm_d_pins: pwm_d {
641                         mux {
642                                 groups = "pwm_d";
643                                 function = "pwm_d";
644                                 bias-disable;
645                         };
646                 };
648                 pwm_e_pins: pwm_e {
649                         mux {
650                                 groups = "pwm_e";
651                                 function = "pwm_e";
652                                 bias-disable;
653                         };
654                 };
656                 pwm_f_x_pins: pwm_f_x {
657                         mux {
658                                 groups = "pwm_f_x";
659                                 function = "pwm_f_x";
660                                 bias-disable;
661                         };
662                 };
664                 pwm_f_y_pins: pwm_f_y {
665                         mux {
666                                 groups = "pwm_f_y";
667                                 function = "pwm_f_y";
668                                 bias-disable;
669                         };
670                 };
672                 hdmi_hpd_pins: hdmi_hpd {
673                         mux {
674                                 groups = "hdmi_hpd";
675                                 function = "hdmi_hpd";
676                                 bias-disable;
677                         };
678                 };
680                 hdmi_i2c_pins: hdmi_i2c {
681                         mux {
682                                 groups = "hdmi_sda", "hdmi_scl";
683                                 function = "hdmi_i2c";
684                                 bias-disable;
685                         };
686                 };
688                 i2sout_ch23_y_pins: i2sout_ch23_y {
689                         mux {
690                                 groups = "i2sout_ch23_y";
691                                 function = "i2s_out";
692                                 bias-disable;
693                         };
694                 };
696                 i2sout_ch45_y_pins: i2sout_ch45_y {
697                         mux {
698                                 groups = "i2sout_ch45_y";
699                                 function = "i2s_out";
700                                 bias-disable;
701                         };
702                 };
704                 i2sout_ch67_y_pins: i2sout_ch67_y {
705                         mux {
706                                 groups = "i2sout_ch67_y";
707                                 function = "i2s_out";
708                                 bias-disable;
709                         };
710                 };
712                 spdif_out_y_pins: spdif_out_y {
713                         mux {
714                                 groups = "spdif_out_y";
715                                 function = "spdif_out";
716                                 bias-disable;
717                         };
718                 };
719         };
722 &pwrc {
723         resets = <&reset RESET_VIU>,
724                  <&reset RESET_VENC>,
725                  <&reset RESET_VCBUS>,
726                  <&reset RESET_BT656>,
727                  <&reset RESET_DVIN_RESET>,
728                  <&reset RESET_RDMA>,
729                  <&reset RESET_VENCI>,
730                  <&reset RESET_VENCP>,
731                  <&reset RESET_VDAC>,
732                  <&reset RESET_VDI6>,
733                  <&reset RESET_VENCL>,
734                  <&reset RESET_VID_LOCK>;
735         reset-names = "viu", "venc", "vcbus", "bt656",
736                       "dvin", "rdma", "venci", "vencp",
737                       "vdac", "vdi6", "vencl", "vid_lock";
738         clocks = <&clkc CLKID_VPU>,
739                  <&clkc CLKID_VAPB>;
740         clock-names = "vpu", "vapb";
741         /*
742          * VPU clocking is provided by two identical clock paths
743          * VPU_0 and VPU_1 muxed to a single clock by a glitch
744          * free mux to safely change frequency while running.
745          * Same for VAPB but with a final gate after the glitch free mux.
746          */
747         assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
748                           <&clkc CLKID_VPU_0>,
749                           <&clkc CLKID_VPU>, /* Glitch free mux */
750                           <&clkc CLKID_VAPB_0_SEL>,
751                           <&clkc CLKID_VAPB_0>,
752                           <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
753         assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
754                                  <0>, /* Do Nothing */
755                                  <&clkc CLKID_VPU_0>,
756                                  <&clkc CLKID_FCLK_DIV4>,
757                                  <0>, /* Do Nothing */
758                                  <&clkc CLKID_VAPB_0>;
759         assigned-clock-rates = <0>, /* Do Nothing */
760                                <666666666>,
761                                <0>, /* Do Nothing */
762                                <0>, /* Do Nothing */
763                                <250000000>,
764                                <0>; /* Do Nothing */
767 &saradc {
768         compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
769         clocks = <&xtal>,
770                  <&clkc CLKID_SAR_ADC>,
771                  <&clkc CLKID_SAR_ADC_CLK>,
772                  <&clkc CLKID_SAR_ADC_SEL>;
773         clock-names = "clkin", "core", "adc_clk", "adc_sel";
776 &sd_emmc_a {
777         clocks = <&clkc CLKID_SD_EMMC_A>,
778                  <&clkc CLKID_SD_EMMC_A_CLK0>,
779                  <&clkc CLKID_FCLK_DIV2>;
780         clock-names = "core", "clkin0", "clkin1";
781         resets = <&reset RESET_SD_EMMC_A>;
784 &sd_emmc_b {
785         clocks = <&clkc CLKID_SD_EMMC_B>,
786                  <&clkc CLKID_SD_EMMC_B_CLK0>,
787                  <&clkc CLKID_FCLK_DIV2>;
788         clock-names = "core", "clkin0", "clkin1";
789         resets = <&reset RESET_SD_EMMC_B>;
792 &sd_emmc_c {
793         clocks = <&clkc CLKID_SD_EMMC_C>,
794                  <&clkc CLKID_SD_EMMC_C_CLK0>,
795                  <&clkc CLKID_FCLK_DIV2>;
796         clock-names = "core", "clkin0", "clkin1";
797         resets = <&reset RESET_SD_EMMC_C>;
800 &simplefb_hdmi {
801         clocks = <&clkc CLKID_HDMI_PCLK>,
802                  <&clkc CLKID_CLK81>,
803                  <&clkc CLKID_GCLK_VENCI_INT0>;
806 &spicc {
807         clocks = <&clkc CLKID_SPICC>;
808         clock-names = "core";
809         resets = <&reset RESET_PERIPHS_SPICC>;
810         num-cs = <1>;
813 &spifc {
814         clocks = <&clkc CLKID_SPI>;
817 &uart_A {
818         clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
819         clock-names = "xtal", "pclk", "baud";
822 &uart_AO {
823         clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
824         clock-names = "xtal", "pclk", "baud";
827 &uart_AO_B {
828         clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
829         clock-names = "xtal", "pclk", "baud";
832 &uart_B {
833         clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
834         clock-names = "xtal", "pclk", "baud";
837 &uart_C {
838         clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
839         clock-names = "xtal", "pclk", "baud";
842 &vpu {
843         compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
844         power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
847 &vdec {
848         compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
849         clocks = <&clkc CLKID_DOS_PARSER>,
850                  <&clkc CLKID_DOS>,
851                  <&clkc CLKID_VDEC_1>,
852                  <&clkc CLKID_VDEC_HEVC>;
853         clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
854         resets = <&reset RESET_PARSER>;
855         reset-names = "esparser";