1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
4 * Parts of this file were based on sources as follows:
6 * Copyright (C) 2006-2008 Intel Corporation
7 * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>
8 * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>
9 * Copyright (C) 2011 Texas Instruments
10 * Copyright (C) 2017 Eric Anholt
13 #include <linux/clk.h>
14 #include <linux/version.h>
15 #include <linux/dma-buf.h>
16 #include <linux/of_graph.h>
17 #include <linux/delay.h>
19 #include <drm/drm_fb_cma_helper.h>
20 #include <drm/drm_fourcc.h>
21 #include <drm/drm_gem_cma_helper.h>
22 #include <drm/drm_gem_framebuffer_helper.h>
23 #include <drm/drm_panel.h>
24 #include <drm/drm_vblank.h>
26 #include "tve200_drm.h"
28 irqreturn_t
tve200_irq(int irq
, void *data
)
30 struct tve200_drm_dev_private
*priv
= data
;
34 stat
= readl(priv
->regs
+ TVE200_INT_STAT
);
42 * The hardware is a bit tilted: the line stays high after clearing
43 * the vblank IRQ, firing many more interrupts. We counter this
44 * by toggling the IRQ back and forth from firing at vblank and
45 * firing at start of active image, which works around the problem
46 * since those occur strictly in sequence, and we get two IRQs for each
47 * frame, one at start of Vblank (that we make call into the CRTC) and
48 * another one at the start of the image (that we discard).
50 if (stat
& TVE200_INT_V_STATUS
) {
51 val
= readl(priv
->regs
+ TVE200_CTRL
);
52 /* We have an actual start of vsync */
53 if (!(val
& TVE200_VSTSTYPE_BITS
)) {
54 drm_crtc_handle_vblank(&priv
->pipe
.crtc
);
55 /* Toggle trigger to start of active image */
56 val
|= TVE200_VSTSTYPE_VAI
;
58 /* Toggle trigger back to start of vsync */
59 val
&= ~TVE200_VSTSTYPE_BITS
;
61 writel(val
, priv
->regs
+ TVE200_CTRL
);
63 dev_err(priv
->drm
->dev
, "stray IRQ %08x\n", stat
);
65 /* Clear the interrupt once done */
66 writel(stat
, priv
->regs
+ TVE200_INT_CLR
);
71 static int tve200_display_check(struct drm_simple_display_pipe
*pipe
,
72 struct drm_plane_state
*pstate
,
73 struct drm_crtc_state
*cstate
)
75 const struct drm_display_mode
*mode
= &cstate
->mode
;
76 struct drm_framebuffer
*old_fb
= pipe
->plane
.state
->fb
;
77 struct drm_framebuffer
*fb
= pstate
->fb
;
80 * We support these specific resolutions and nothing else.
82 if (!(mode
->hdisplay
== 352 && mode
->vdisplay
== 240) && /* SIF(525) */
83 !(mode
->hdisplay
== 352 && mode
->vdisplay
== 288) && /* CIF(625) */
84 !(mode
->hdisplay
== 640 && mode
->vdisplay
== 480) && /* VGA */
85 !(mode
->hdisplay
== 720 && mode
->vdisplay
== 480) && /* D1 */
86 !(mode
->hdisplay
== 720 && mode
->vdisplay
== 576)) { /* D1 */
87 DRM_DEBUG_KMS("unsupported display mode (%u x %u)\n",
88 mode
->hdisplay
, mode
->vdisplay
);
93 u32 offset
= drm_fb_cma_get_gem_addr(fb
, pstate
, 0);
95 /* FB base address must be dword aligned. */
97 DRM_DEBUG_KMS("FB not 32-bit aligned\n");
102 * There's no pitch register, the mode's hdisplay
105 if (fb
->pitches
[0] != mode
->hdisplay
* fb
->format
->cpp
[0]) {
106 DRM_DEBUG_KMS("can't handle pitches\n");
111 * We can't change the FB format in a flicker-free
112 * manner (and only update it during CRTC enable).
114 if (old_fb
&& old_fb
->format
!= fb
->format
)
115 cstate
->mode_changed
= true;
121 static void tve200_display_enable(struct drm_simple_display_pipe
*pipe
,
122 struct drm_crtc_state
*cstate
,
123 struct drm_plane_state
*plane_state
)
125 struct drm_crtc
*crtc
= &pipe
->crtc
;
126 struct drm_plane
*plane
= &pipe
->plane
;
127 struct drm_device
*drm
= crtc
->dev
;
128 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
129 const struct drm_display_mode
*mode
= &cstate
->mode
;
130 struct drm_framebuffer
*fb
= plane
->state
->fb
;
131 struct drm_connector
*connector
= priv
->connector
;
132 u32 format
= fb
->format
->format
;
136 clk_prepare_enable(priv
->clk
);
138 /* Reset the TVE200 and wait for it to come back online */
139 writel(TVE200_CTRL_4_RESET
, priv
->regs
+ TVE200_CTRL_4
);
140 for (retries
= 0; retries
< 5; retries
++) {
141 usleep_range(30000, 50000);
142 if (readl(priv
->regs
+ TVE200_CTRL_4
) & TVE200_CTRL_4_RESET
)
148 readl(priv
->regs
+ TVE200_CTRL_4
) & TVE200_CTRL_4_RESET
) {
149 dev_err(drm
->dev
, "can't get hardware out of reset\n");
154 ctrl1
|= TVE200_CTRL_CSMODE
;
155 /* Interlace mode for CCIR656: parameterize? */
156 ctrl1
|= TVE200_CTRL_NONINTERLACE
;
157 /* 32 words per burst */
158 ctrl1
|= TVE200_CTRL_BURST_32_WORDS
;
160 ctrl1
|= TVE200_CTRL_RETRYCNT_16
;
161 /* NTSC mode: parametrize? */
162 ctrl1
|= TVE200_CTRL_NTSC
;
164 /* Vsync IRQ at start of Vsync at first */
165 ctrl1
|= TVE200_VSTSTYPE_VSYNC
;
167 if (connector
->display_info
.bus_flags
&
168 DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE
)
169 ctrl1
|= TVE200_CTRL_TVCLKP
;
171 if ((mode
->hdisplay
== 352 && mode
->vdisplay
== 240) || /* SIF(525) */
172 (mode
->hdisplay
== 352 && mode
->vdisplay
== 288)) { /* CIF(625) */
173 ctrl1
|= TVE200_CTRL_IPRESOL_CIF
;
174 dev_info(drm
->dev
, "CIF mode\n");
175 } else if (mode
->hdisplay
== 640 && mode
->vdisplay
== 480) {
176 ctrl1
|= TVE200_CTRL_IPRESOL_VGA
;
177 dev_info(drm
->dev
, "VGA mode\n");
178 } else if ((mode
->hdisplay
== 720 && mode
->vdisplay
== 480) ||
179 (mode
->hdisplay
== 720 && mode
->vdisplay
== 576)) {
180 ctrl1
|= TVE200_CTRL_IPRESOL_D1
;
181 dev_info(drm
->dev
, "D1 mode\n");
184 if (format
& DRM_FORMAT_BIG_ENDIAN
) {
185 ctrl1
|= TVE200_CTRL_BBBP
;
186 format
&= ~DRM_FORMAT_BIG_ENDIAN
;
190 case DRM_FORMAT_XRGB8888
:
191 ctrl1
|= TVE200_IPDMOD_RGB888
;
193 case DRM_FORMAT_RGB565
:
194 ctrl1
|= TVE200_IPDMOD_RGB565
;
196 case DRM_FORMAT_XRGB1555
:
197 ctrl1
|= TVE200_IPDMOD_RGB555
;
199 case DRM_FORMAT_XBGR8888
:
200 ctrl1
|= TVE200_IPDMOD_RGB888
| TVE200_BGR
;
202 case DRM_FORMAT_BGR565
:
203 ctrl1
|= TVE200_IPDMOD_RGB565
| TVE200_BGR
;
205 case DRM_FORMAT_XBGR1555
:
206 ctrl1
|= TVE200_IPDMOD_RGB555
| TVE200_BGR
;
208 case DRM_FORMAT_YUYV
:
209 ctrl1
|= TVE200_IPDMOD_YUV422
;
210 ctrl1
|= TVE200_CTRL_YCBCRODR_CR0Y1CB0Y0
;
212 case DRM_FORMAT_YVYU
:
213 ctrl1
|= TVE200_IPDMOD_YUV422
;
214 ctrl1
|= TVE200_CTRL_YCBCRODR_CB0Y1CR0Y0
;
216 case DRM_FORMAT_UYVY
:
217 ctrl1
|= TVE200_IPDMOD_YUV422
;
218 ctrl1
|= TVE200_CTRL_YCBCRODR_Y1CR0Y0CB0
;
220 case DRM_FORMAT_VYUY
:
221 ctrl1
|= TVE200_IPDMOD_YUV422
;
222 ctrl1
|= TVE200_CTRL_YCBCRODR_Y1CB0Y0CR0
;
224 case DRM_FORMAT_YUV420
:
225 ctrl1
|= TVE200_CTRL_YUV420
;
226 ctrl1
|= TVE200_IPDMOD_YUV420
;
229 dev_err(drm
->dev
, "Unknown FB format 0x%08x\n",
234 ctrl1
|= TVE200_TVEEN
;
237 writel(ctrl1
, priv
->regs
+ TVE200_CTRL
);
239 drm_crtc_vblank_on(crtc
);
242 static void tve200_display_disable(struct drm_simple_display_pipe
*pipe
)
244 struct drm_crtc
*crtc
= &pipe
->crtc
;
245 struct drm_device
*drm
= crtc
->dev
;
246 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
248 drm_crtc_vblank_off(crtc
);
250 /* Disable put into reset and Power Down */
251 writel(0, priv
->regs
+ TVE200_CTRL
);
252 writel(TVE200_CTRL_4_RESET
, priv
->regs
+ TVE200_CTRL_4
);
254 clk_disable_unprepare(priv
->clk
);
257 static void tve200_display_update(struct drm_simple_display_pipe
*pipe
,
258 struct drm_plane_state
*old_pstate
)
260 struct drm_crtc
*crtc
= &pipe
->crtc
;
261 struct drm_device
*drm
= crtc
->dev
;
262 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
263 struct drm_pending_vblank_event
*event
= crtc
->state
->event
;
264 struct drm_plane
*plane
= &pipe
->plane
;
265 struct drm_plane_state
*pstate
= plane
->state
;
266 struct drm_framebuffer
*fb
= pstate
->fb
;
269 /* For RGB, the Y component is used as base address */
270 writel(drm_fb_cma_get_gem_addr(fb
, pstate
, 0),
271 priv
->regs
+ TVE200_Y_FRAME_BASE_ADDR
);
273 /* For three plane YUV we need two more addresses */
274 if (fb
->format
->format
== DRM_FORMAT_YUV420
) {
275 writel(drm_fb_cma_get_gem_addr(fb
, pstate
, 1),
276 priv
->regs
+ TVE200_U_FRAME_BASE_ADDR
);
277 writel(drm_fb_cma_get_gem_addr(fb
, pstate
, 2),
278 priv
->regs
+ TVE200_V_FRAME_BASE_ADDR
);
283 crtc
->state
->event
= NULL
;
285 spin_lock_irq(&crtc
->dev
->event_lock
);
286 if (crtc
->state
->active
&& drm_crtc_vblank_get(crtc
) == 0)
287 drm_crtc_arm_vblank_event(crtc
, event
);
289 drm_crtc_send_vblank_event(crtc
, event
);
290 spin_unlock_irq(&crtc
->dev
->event_lock
);
294 static int tve200_display_enable_vblank(struct drm_simple_display_pipe
*pipe
)
296 struct drm_crtc
*crtc
= &pipe
->crtc
;
297 struct drm_device
*drm
= crtc
->dev
;
298 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
300 /* Clear any IRQs and enable */
301 writel(0xFF, priv
->regs
+ TVE200_INT_CLR
);
302 writel(TVE200_INT_V_STATUS
, priv
->regs
+ TVE200_INT_EN
);
306 static void tve200_display_disable_vblank(struct drm_simple_display_pipe
*pipe
)
308 struct drm_crtc
*crtc
= &pipe
->crtc
;
309 struct drm_device
*drm
= crtc
->dev
;
310 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
312 writel(0, priv
->regs
+ TVE200_INT_EN
);
315 static const struct drm_simple_display_pipe_funcs tve200_display_funcs
= {
316 .check
= tve200_display_check
,
317 .enable
= tve200_display_enable
,
318 .disable
= tve200_display_disable
,
319 .update
= tve200_display_update
,
320 .prepare_fb
= drm_gem_fb_simple_display_pipe_prepare_fb
,
321 .enable_vblank
= tve200_display_enable_vblank
,
322 .disable_vblank
= tve200_display_disable_vblank
,
325 int tve200_display_init(struct drm_device
*drm
)
327 struct tve200_drm_dev_private
*priv
= drm
->dev_private
;
329 static const u32 formats
[] = {
337 * The controller actually supports any YCbCr ordering,
338 * for packed YCbCr. This just lists the orderings that
345 /* This uses three planes */
349 ret
= drm_simple_display_pipe_init(drm
, &priv
->pipe
,
350 &tve200_display_funcs
,
351 formats
, ARRAY_SIZE(formats
),