drivers/infiniband/hw/qib/qib_eeprom.c

   1 /*
   2  * Copyright (c) 2012 Intel Corporation. All rights reserved.
   3  * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
   4  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
   5  *
   6  * This software is available to you under a choice of one of two
   7  * licenses.  You may choose to be licensed under the terms of the GNU
   8  * General Public License (GPL) Version 2, available from the file
   9  * COPYING in the main directory of this source tree, or the
  10  * OpenIB.org BSD license below:
  11  *
  12  *     Redistribution and use in source and binary forms, with or
  13  *     without modification, are permitted provided that the following
  14  *     conditions are met:
  15  *
  16  *      - Redistributions of source code must retain the above
  17  *        copyright notice, this list of conditions and the following
  18  *        disclaimer.
  19  *
  20  *      - Redistributions in binary form must reproduce the above
  21  *        copyright notice, this list of conditions and the following
  22  *        disclaimer in the documentation and/or other materials
  23  *        provided with the distribution.
  24  *
  25  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  26  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  27  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  28  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  29  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  30  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  31  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  32  * SOFTWARE.
  33  */
  34
  35 #include <linux/delay.h>
  36 #include <linux/pci.h>
  37 #include <linux/vmalloc.h>
  38
  39 #include "qib.h"
  40
  41 /*
  42  * Functions specific to the serial EEPROM on cards handled by ib_qib.
  43  * The actual serail interface code is in qib_twsi.c. This file is a client
  44  */
  45
  46 /**
  47  * qib_eeprom_read - receives bytes from the eeprom via I2C
  48  * @dd: the qlogic_ib device
  49  * @eeprom_offset: address to read from
  50  * @buffer: where to store result
  51  * @len: number of bytes to receive
  52  */
  53 int qib_eeprom_read(struct qib_devdata *dd, u8 eeprom_offset,
  54                     void *buff, int len)
  55 {
  56         int ret;
  57
  58         ret = mutex_lock_interruptible(&dd->eep_lock);
  59         if (!ret) {
  60                 ret = qib_twsi_reset(dd);
  61                 if (ret)
  62                         qib_dev_err(dd, "EEPROM Reset for read failed\n");
  63                 else
  64                         ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev,
  65                                               eeprom_offset, buff, len);
  66                 mutex_unlock(&dd->eep_lock);
  67         }
  68
  69         return ret;
  70 }
  71
  72 /*
  73  * Actually update the eeprom, first doing write enable if
  74  * needed, then restoring write enable state.
  75  * Must be called with eep_lock held
  76  */
  77 static int eeprom_write_with_enable(struct qib_devdata *dd, u8 offset,
  78                      const void *buf, int len)
  79 {
  80         int ret, pwen;
  81
  82         pwen = dd->f_eeprom_wen(dd, 1);
  83         ret = qib_twsi_reset(dd);
  84         if (ret)
  85                 qib_dev_err(dd, "EEPROM Reset for write failed\n");
  86         else
  87                 ret = qib_twsi_blk_wr(dd, dd->twsi_eeprom_dev,
  88                                       offset, buf, len);
  89         dd->f_eeprom_wen(dd, pwen);
  90         return ret;
  91 }
  92
  93 /**
  94  * qib_eeprom_write - writes data to the eeprom via I2C
  95  * @dd: the qlogic_ib device
  96  * @eeprom_offset: where to place data
  97  * @buffer: data to write
  98  * @len: number of bytes to write
  99  */
 100 int qib_eeprom_write(struct qib_devdata *dd, u8 eeprom_offset,
 101                      const void *buff, int len)
 102 {
 103         int ret;
 104
 105         ret = mutex_lock_interruptible(&dd->eep_lock);
 106         if (!ret) {
 107                 ret = eeprom_write_with_enable(dd, eeprom_offset, buff, len);
 108                 mutex_unlock(&dd->eep_lock);
 109         }
 110
 111         return ret;
 112 }
 113
 114 static u8 flash_csum(struct qib_flash *ifp, int adjust)
 115 {
 116         u8 *ip = (u8 *) ifp;
 117         u8 csum = 0, len;
 118
 119         /*
 120          * Limit length checksummed to max length of actual data.
 121          * Checksum of erased eeprom will still be bad, but we avoid
 122          * reading past the end of the buffer we were passed.
 123          */
 124         len = ifp->if_length;
 125         if (len > sizeof(struct qib_flash))
 126                 len = sizeof(struct qib_flash);
 127         while (len--)
 128                 csum += *ip++;
 129         csum -= ifp->if_csum;
 130         csum = ~csum;
 131         if (adjust)
 132                 ifp->if_csum = csum;
 133
 134         return csum;
 135 }
 136
 137 /**
 138  * qib_get_eeprom_info- get the GUID et al. from the TSWI EEPROM device
 139  * @dd: the qlogic_ib device
 140  *
 141  * We have the capability to use the nguid field, and get
 142  * the guid from the first chip's flash, to use for all of them.
 143  */
 144 void qib_get_eeprom_info(struct qib_devdata *dd)
 145 {
 146         void *buf;
 147         struct qib_flash *ifp;
 148         __be64 guid;
 149         int len, eep_stat;
 150         u8 csum, *bguid;
 151         int t = dd->unit;
 152         struct qib_devdata *dd0 = qib_lookup(0);
 153
 154         if (t && dd0->nguid > 1 && t <= dd0->nguid) {
 155                 u8 oguid;
 156
 157                 dd->base_guid = dd0->base_guid;
 158                 bguid = (u8 *) &dd->base_guid;
 159
 160                 oguid = bguid[7];
 161                 bguid[7] += t;
 162                 if (oguid > bguid[7]) {
 163                         if (bguid[6] == 0xff) {
 164                                 if (bguid[5] == 0xff) {
 165                                         qib_dev_err(dd,
 166                                                     "Can't set GUID from base, wraps to OUI!\n");
 167                                         dd->base_guid = 0;
 168                                         goto bail;
 169                                 }
 170                                 bguid[5]++;
 171                         }
 172                         bguid[6]++;
 173                 }
 174                 dd->nguid = 1;
 175                 goto bail;
 176         }
 177
 178         /*
 179          * Read full flash, not just currently used part, since it may have
 180          * been written with a newer definition.
 181          * */
 182         len = sizeof(struct qib_flash);
 183         buf = vmalloc(len);
 184         if (!buf)
 185                 goto bail;
 186
 187         /*
 188          * Use "public" eeprom read function, which does locking and
 189          * figures out device. This will migrate to chip-specific.
 190          */
 191         eep_stat = qib_eeprom_read(dd, 0, buf, len);
 192
 193         if (eep_stat) {
 194                 qib_dev_err(dd, "Failed reading GUID from eeprom\n");
 195                 goto done;
 196         }
 197         ifp = (struct qib_flash *)buf;
 198
 199         csum = flash_csum(ifp, 0);
 200         if (csum != ifp->if_csum) {
 201                 qib_devinfo(dd->pcidev,
 202                         "Bad I2C flash checksum: 0x%x, not 0x%x\n",
 203                         csum, ifp->if_csum);
 204                 goto done;
 205         }
 206         if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
 207             *(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
 208                 qib_dev_err(dd,
 209                         "Invalid GUID %llx from flash; ignoring\n",
 210                         *(unsigned long long *) ifp->if_guid);
 211                 /* don't allow GUID if all 0 or all 1's */
 212                 goto done;
 213         }
 214
 215         /* complain, but allow it */
 216         if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
 217                 qib_devinfo(dd->pcidev,
 218                         "Warning, GUID %llx is default, probably not correct!\n",
 219                         *(unsigned long long *) ifp->if_guid);
 220
 221         bguid = ifp->if_guid;
 222         if (!bguid[0] && !bguid[1] && !bguid[2]) {
 223                 /*
 224                  * Original incorrect GUID format in flash; fix in
 225                  * core copy, by shifting up 2 octets; don't need to
 226                  * change top octet, since both it and shifted are 0.
 227                  */
 228                 bguid[1] = bguid[3];
 229                 bguid[2] = bguid[4];
 230                 bguid[3] = 0;
 231                 bguid[4] = 0;
 232                 guid = *(__be64 *) ifp->if_guid;
 233         } else
 234                 guid = *(__be64 *) ifp->if_guid;
 235         dd->base_guid = guid;
 236         dd->nguid = ifp->if_numguid;
 237         /*
 238          * Things are slightly complicated by the desire to transparently
 239          * support both the Pathscale 10-digit serial number and the QLogic
 240          * 13-character version.
 241          */
 242         if ((ifp->if_fversion > 1) && ifp->if_sprefix[0] &&
 243             ((u8 *) ifp->if_sprefix)[0] != 0xFF) {
 244                 char *snp = dd->serial;
 245
 246                 /*
 247                  * This board has a Serial-prefix, which is stored
 248                  * elsewhere for backward-compatibility.
 249                  */
 250                 memcpy(snp, ifp->if_sprefix, sizeof(ifp->if_sprefix));
 251                 snp[sizeof(ifp->if_sprefix)] = '\0';
 252                 len = strlen(snp);
 253                 snp += len;
 254                 len = sizeof(dd->serial) - len;
 255                 if (len > sizeof(ifp->if_serial))
 256                         len = sizeof(ifp->if_serial);
 257                 memcpy(snp, ifp->if_serial, len);
 258         } else {
 259                 memcpy(dd->serial, ifp->if_serial, sizeof(ifp->if_serial));
 260         }
 261         if (!strstr(ifp->if_comment, "Tested successfully"))
 262                 qib_dev_err(dd,
 263                         "Board SN %s did not pass functional test: %s\n",
 264                         dd->serial, ifp->if_comment);
 265
 266 done:
 267         vfree(buf);
 268
 269 bail:;
 270 }
 271