WIP FPC-III support
[linux/fpc-iii.git] / drivers / net / wireless / ti / wl18xx / conf.h
blob9621bc2475368471f00606811564e69abfaf60d5
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * This file is part of wl18xx
5 * Copyright (C) 2011 Texas Instruments Inc.
6 */
8 #ifndef __WL18XX_CONF_H__
9 #define __WL18XX_CONF_H__
11 #define WL18XX_CONF_MAGIC 0x10e100ca
12 #define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0007)
13 #define WL18XX_CONF_MASK 0x0000ffff
14 #define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \
15 sizeof(struct wl18xx_priv_conf))
17 #define NUM_OF_CHANNELS_11_ABG 150
18 #define NUM_OF_CHANNELS_11_P 7
19 #define SRF_TABLE_LEN 16
20 #define PIN_MUXING_SIZE 2
21 #define WL18XX_TRACE_LOSS_GAPS_TX 10
22 #define WL18XX_TRACE_LOSS_GAPS_RX 18
24 struct wl18xx_mac_and_phy_params {
25 u8 phy_standalone;
26 u8 spare0;
27 u8 enable_clpc;
28 u8 enable_tx_low_pwr_on_siso_rdl;
29 u8 auto_detect;
30 u8 dedicated_fem;
32 u8 low_band_component;
34 /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
35 u8 low_band_component_type;
37 u8 high_band_component;
39 /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
40 u8 high_band_component_type;
41 u8 number_of_assembled_ant2_4;
42 u8 number_of_assembled_ant5;
43 u8 pin_muxing_platform_options[PIN_MUXING_SIZE];
44 u8 external_pa_dc2dc;
45 u8 tcxo_ldo_voltage;
46 u8 xtal_itrim_val;
47 u8 srf_state;
48 u8 srf1[SRF_TABLE_LEN];
49 u8 srf2[SRF_TABLE_LEN];
50 u8 srf3[SRF_TABLE_LEN];
51 u8 io_configuration;
52 u8 sdio_configuration;
53 u8 settings;
54 u8 rx_profile;
55 u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG];
56 u8 pwr_limit_reference_11_abg;
57 u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
58 u8 pwr_limit_reference_11p;
59 u8 spare1;
60 u8 per_chan_bo_mode_11_abg[13];
61 u8 per_chan_bo_mode_11_p[4];
62 u8 primary_clock_setting_time;
63 u8 clock_valid_on_wake_up;
64 u8 secondary_clock_setting_time;
65 u8 board_type;
66 /* enable point saturation */
67 u8 psat;
68 /* low/medium/high Tx power in dBm for STA-HP BG */
69 s8 low_power_val;
70 s8 med_power_val;
71 s8 high_power_val;
72 s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX];
73 s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX];
74 u8 tx_rf_margin;
75 /* low/medium/high Tx power in dBm for other role */
76 s8 low_power_val_2nd;
77 s8 med_power_val_2nd;
78 s8 high_power_val_2nd;
80 u8 padding[1];
81 } __packed;
83 enum wl18xx_ht_mode {
84 /* Default - use MIMO, fallback to SISO20 */
85 HT_MODE_DEFAULT = 0,
87 /* Wide - use SISO40 */
88 HT_MODE_WIDE = 1,
90 /* Use SISO20 */
91 HT_MODE_SISO20 = 2,
94 struct wl18xx_ht_settings {
95 /* DEFAULT / WIDE / SISO20 */
96 u8 mode;
97 } __packed;
99 struct conf_ap_sleep_settings {
100 /* Duty Cycle (20-80% of staying Awake) for IDLE AP
101 * (0: disable)
103 u8 idle_duty_cycle;
104 /* Duty Cycle (20-80% of staying Awake) for Connected AP
105 * (0: disable)
107 u8 connected_duty_cycle;
108 /* Maximum stations that are allowed to be connected to AP
109 * (255: no limit)
111 u8 max_stations_thresh;
112 /* Timeout till enabling the Sleep Mechanism after data stops
113 * [unit: 100 msec]
115 u8 idle_conn_thresh;
116 } __packed;
118 struct wl18xx_priv_conf {
119 /* Module params structures */
120 struct wl18xx_ht_settings ht;
122 /* this structure is copied wholesale to FW */
123 struct wl18xx_mac_and_phy_params phy;
125 struct conf_ap_sleep_settings ap_sleep;
126 } __packed;
128 enum wl18xx_sg_params {
129 WL18XX_CONF_SG_PARAM_0 = 0,
131 /* Configuration Parameters */
132 WL18XX_CONF_SG_ANTENNA_CONFIGURATION,
133 WL18XX_CONF_SG_ZIGBEE_COEX,
134 WL18XX_CONF_SG_TIME_SYNC,
136 WL18XX_CONF_SG_PARAM_4,
137 WL18XX_CONF_SG_PARAM_5,
138 WL18XX_CONF_SG_PARAM_6,
139 WL18XX_CONF_SG_PARAM_7,
140 WL18XX_CONF_SG_PARAM_8,
141 WL18XX_CONF_SG_PARAM_9,
142 WL18XX_CONF_SG_PARAM_10,
143 WL18XX_CONF_SG_PARAM_11,
144 WL18XX_CONF_SG_PARAM_12,
145 WL18XX_CONF_SG_PARAM_13,
146 WL18XX_CONF_SG_PARAM_14,
147 WL18XX_CONF_SG_PARAM_15,
148 WL18XX_CONF_SG_PARAM_16,
149 WL18XX_CONF_SG_PARAM_17,
150 WL18XX_CONF_SG_PARAM_18,
151 WL18XX_CONF_SG_PARAM_19,
152 WL18XX_CONF_SG_PARAM_20,
153 WL18XX_CONF_SG_PARAM_21,
154 WL18XX_CONF_SG_PARAM_22,
155 WL18XX_CONF_SG_PARAM_23,
156 WL18XX_CONF_SG_PARAM_24,
157 WL18XX_CONF_SG_PARAM_25,
159 /* Active Scan Parameters */
160 WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
161 WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
163 WL18XX_CONF_SG_PARAM_28,
165 /* Passive Scan Parameters */
166 WL18XX_CONF_SG_PARAM_29,
167 WL18XX_CONF_SG_PARAM_30,
168 WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
170 /* Passive Scan in Dual Antenna Parameters */
171 WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
172 WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN,
173 WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,
175 /* General Parameters */
176 WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
177 WL18XX_CONF_SG_PARAM_36,
178 WL18XX_CONF_SG_BEACON_MISS_PERCENT,
179 WL18XX_CONF_SG_PARAM_38,
180 WL18XX_CONF_SG_RXT,
181 WL18XX_CONF_SG_UNUSED,
182 WL18XX_CONF_SG_ADAPTIVE_RXT_TXT,
183 WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
184 WL18XX_CONF_SG_HV3_MAX_SERVED,
185 WL18XX_CONF_SG_PARAM_44,
186 WL18XX_CONF_SG_PARAM_45,
187 WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
188 WL18XX_CONF_SG_GEMINI_PARAM_47,
189 WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,
191 /* AP Parameters */
192 WL18XX_CONF_SG_AP_BEACON_MISS_TX,
193 WL18XX_CONF_SG_PARAM_50,
194 WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL,
195 WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME,
196 WL18XX_CONF_SG_PARAM_53,
197 WL18XX_CONF_SG_PARAM_54,
199 /* CTS Diluting Parameters */
200 WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
201 WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
203 WL18XX_CONF_SG_TEMP_PARAM_1,
204 WL18XX_CONF_SG_TEMP_PARAM_2,
205 WL18XX_CONF_SG_TEMP_PARAM_3,
206 WL18XX_CONF_SG_TEMP_PARAM_4,
207 WL18XX_CONF_SG_TEMP_PARAM_5,
208 WL18XX_CONF_SG_TEMP_PARAM_6,
209 WL18XX_CONF_SG_TEMP_PARAM_7,
210 WL18XX_CONF_SG_TEMP_PARAM_8,
211 WL18XX_CONF_SG_TEMP_PARAM_9,
212 WL18XX_CONF_SG_TEMP_PARAM_10,
214 WL18XX_CONF_SG_PARAMS_MAX,
215 WL18XX_CONF_SG_PARAMS_ALL = 0xff
218 #endif /* __WL18XX_CONF_H__ */