WIP FPC-III support
[linux/fpc-iii.git] / drivers / regulator / wm8350-regulator.c
blob6579bfdb0c2624e5130fdf6280c30a3ea6061ba7
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // wm8350.c -- Voltage and current regulation for the Wolfson WM8350 PMIC
4 //
5 // Copyright 2007, 2008 Wolfson Microelectronics PLC.
6 //
7 // Author: Liam Girdwood
8 // linux@wolfsonmicro.com
10 #include <linux/module.h>
11 #include <linux/moduleparam.h>
12 #include <linux/init.h>
13 #include <linux/bitops.h>
14 #include <linux/err.h>
15 #include <linux/i2c.h>
16 #include <linux/mfd/wm8350/core.h>
17 #include <linux/mfd/wm8350/pmic.h>
18 #include <linux/platform_device.h>
19 #include <linux/regulator/driver.h>
20 #include <linux/regulator/machine.h>
22 /* Maximum value possible for VSEL */
23 #define WM8350_DCDC_MAX_VSEL 0x66
25 /* Microamps */
26 static const unsigned int isink_cur[] = {
32 10,
33 11,
34 14,
35 16,
36 19,
37 23,
38 27,
39 32,
40 39,
41 46,
42 54,
43 65,
44 77,
45 92,
46 109,
47 130,
48 154,
49 183,
50 218,
51 259,
52 308,
53 367,
54 436,
55 518,
56 616,
57 733,
58 872,
59 1037,
60 1233,
61 1466,
62 1744,
63 2073,
64 2466,
65 2933,
66 3487,
67 4147,
68 4932,
69 5865,
70 6975,
71 8294,
72 9864,
73 11730,
74 13949,
75 16589,
76 19728,
77 23460,
78 27899,
79 33178,
80 39455,
81 46920,
82 55798,
83 66355,
84 78910,
85 93840,
86 111596,
87 132710,
88 157820,
89 187681,
90 223191
93 /* turn on ISINK followed by DCDC */
94 static int wm8350_isink_enable(struct regulator_dev *rdev)
96 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
97 int isink = rdev_get_id(rdev);
99 switch (isink) {
100 case WM8350_ISINK_A:
101 switch (wm8350->pmic.isink_A_dcdc) {
102 case WM8350_DCDC_2:
103 case WM8350_DCDC_5:
104 wm8350_set_bits(wm8350, WM8350_POWER_MGMT_7,
105 WM8350_CS1_ENA);
106 wm8350_set_bits(wm8350, WM8350_CSA_FLASH_CONTROL,
107 WM8350_CS1_DRIVE);
108 wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED,
109 1 << (wm8350->pmic.isink_A_dcdc -
110 WM8350_DCDC_1));
111 break;
112 default:
113 return -EINVAL;
115 break;
116 case WM8350_ISINK_B:
117 switch (wm8350->pmic.isink_B_dcdc) {
118 case WM8350_DCDC_2:
119 case WM8350_DCDC_5:
120 wm8350_set_bits(wm8350, WM8350_POWER_MGMT_7,
121 WM8350_CS2_ENA);
122 wm8350_set_bits(wm8350, WM8350_CSB_FLASH_CONTROL,
123 WM8350_CS2_DRIVE);
124 wm8350_set_bits(wm8350, WM8350_DCDC_LDO_REQUESTED,
125 1 << (wm8350->pmic.isink_B_dcdc -
126 WM8350_DCDC_1));
127 break;
128 default:
129 return -EINVAL;
131 break;
132 default:
133 return -EINVAL;
135 return 0;
138 static int wm8350_isink_disable(struct regulator_dev *rdev)
140 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
141 int isink = rdev_get_id(rdev);
143 switch (isink) {
144 case WM8350_ISINK_A:
145 switch (wm8350->pmic.isink_A_dcdc) {
146 case WM8350_DCDC_2:
147 case WM8350_DCDC_5:
148 wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED,
149 1 << (wm8350->pmic.isink_A_dcdc -
150 WM8350_DCDC_1));
151 wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_7,
152 WM8350_CS1_ENA);
153 break;
154 default:
155 return -EINVAL;
157 break;
158 case WM8350_ISINK_B:
159 switch (wm8350->pmic.isink_B_dcdc) {
160 case WM8350_DCDC_2:
161 case WM8350_DCDC_5:
162 wm8350_clear_bits(wm8350, WM8350_DCDC_LDO_REQUESTED,
163 1 << (wm8350->pmic.isink_B_dcdc -
164 WM8350_DCDC_1));
165 wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_7,
166 WM8350_CS2_ENA);
167 break;
168 default:
169 return -EINVAL;
171 break;
172 default:
173 return -EINVAL;
175 return 0;
178 static int wm8350_isink_is_enabled(struct regulator_dev *rdev)
180 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
181 int isink = rdev_get_id(rdev);
183 switch (isink) {
184 case WM8350_ISINK_A:
185 return wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_A) &
186 0x8000;
187 case WM8350_ISINK_B:
188 return wm8350_reg_read(wm8350, WM8350_CURRENT_SINK_DRIVER_B) &
189 0x8000;
191 return -EINVAL;
194 static int wm8350_isink_enable_time(struct regulator_dev *rdev)
196 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
197 int isink = rdev_get_id(rdev);
198 int reg;
200 switch (isink) {
201 case WM8350_ISINK_A:
202 reg = wm8350_reg_read(wm8350, WM8350_CSA_FLASH_CONTROL);
203 break;
204 case WM8350_ISINK_B:
205 reg = wm8350_reg_read(wm8350, WM8350_CSB_FLASH_CONTROL);
206 break;
207 default:
208 return -EINVAL;
211 if (reg & WM8350_CS1_FLASH_MODE) {
212 switch (reg & WM8350_CS1_ON_RAMP_MASK) {
213 case 0:
214 return 0;
215 case 1:
216 return 1950;
217 case 2:
218 return 3910;
219 case 3:
220 return 7800;
222 } else {
223 switch (reg & WM8350_CS1_ON_RAMP_MASK) {
224 case 0:
225 return 0;
226 case 1:
227 return 250000;
228 case 2:
229 return 500000;
230 case 3:
231 return 1000000;
235 return -EINVAL;
239 int wm8350_isink_set_flash(struct wm8350 *wm8350, int isink, u16 mode,
240 u16 trigger, u16 duration, u16 on_ramp, u16 off_ramp,
241 u16 drive)
243 switch (isink) {
244 case WM8350_ISINK_A:
245 wm8350_reg_write(wm8350, WM8350_CSA_FLASH_CONTROL,
246 (mode ? WM8350_CS1_FLASH_MODE : 0) |
247 (trigger ? WM8350_CS1_TRIGSRC : 0) |
248 duration | on_ramp | off_ramp | drive);
249 break;
250 case WM8350_ISINK_B:
251 wm8350_reg_write(wm8350, WM8350_CSB_FLASH_CONTROL,
252 (mode ? WM8350_CS2_FLASH_MODE : 0) |
253 (trigger ? WM8350_CS2_TRIGSRC : 0) |
254 duration | on_ramp | off_ramp | drive);
255 break;
256 default:
257 return -EINVAL;
259 return 0;
261 EXPORT_SYMBOL_GPL(wm8350_isink_set_flash);
263 static int wm8350_dcdc_set_suspend_voltage(struct regulator_dev *rdev, int uV)
265 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
266 int sel, volt_reg, dcdc = rdev_get_id(rdev);
267 u16 val;
269 dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, dcdc, uV / 1000);
271 switch (dcdc) {
272 case WM8350_DCDC_1:
273 volt_reg = WM8350_DCDC1_LOW_POWER;
274 break;
275 case WM8350_DCDC_3:
276 volt_reg = WM8350_DCDC3_LOW_POWER;
277 break;
278 case WM8350_DCDC_4:
279 volt_reg = WM8350_DCDC4_LOW_POWER;
280 break;
281 case WM8350_DCDC_6:
282 volt_reg = WM8350_DCDC6_LOW_POWER;
283 break;
284 case WM8350_DCDC_2:
285 case WM8350_DCDC_5:
286 default:
287 return -EINVAL;
290 sel = regulator_map_voltage_linear(rdev, uV, uV);
291 if (sel < 0)
292 return sel;
294 /* all DCDCs have same mV bits */
295 val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_DC1_VSEL_MASK;
296 wm8350_reg_write(wm8350, volt_reg, val | sel);
297 return 0;
300 static int wm8350_dcdc_set_suspend_enable(struct regulator_dev *rdev)
302 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
303 int dcdc = rdev_get_id(rdev);
304 u16 val;
306 switch (dcdc) {
307 case WM8350_DCDC_1:
308 val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER)
309 & ~WM8350_DCDC_HIB_MODE_MASK;
310 wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER,
311 val | wm8350->pmic.dcdc1_hib_mode);
312 break;
313 case WM8350_DCDC_3:
314 val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER)
315 & ~WM8350_DCDC_HIB_MODE_MASK;
316 wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER,
317 val | wm8350->pmic.dcdc3_hib_mode);
318 break;
319 case WM8350_DCDC_4:
320 val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER)
321 & ~WM8350_DCDC_HIB_MODE_MASK;
322 wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER,
323 val | wm8350->pmic.dcdc4_hib_mode);
324 break;
325 case WM8350_DCDC_6:
326 val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER)
327 & ~WM8350_DCDC_HIB_MODE_MASK;
328 wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER,
329 val | wm8350->pmic.dcdc6_hib_mode);
330 break;
331 case WM8350_DCDC_2:
332 case WM8350_DCDC_5:
333 default:
334 return -EINVAL;
337 return 0;
340 static int wm8350_dcdc_set_suspend_disable(struct regulator_dev *rdev)
342 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
343 int dcdc = rdev_get_id(rdev);
344 u16 val;
346 switch (dcdc) {
347 case WM8350_DCDC_1:
348 val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER);
349 wm8350->pmic.dcdc1_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
350 wm8350_reg_write(wm8350, WM8350_DCDC1_LOW_POWER,
351 val | WM8350_DCDC_HIB_MODE_DIS);
352 break;
353 case WM8350_DCDC_3:
354 val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER);
355 wm8350->pmic.dcdc3_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
356 wm8350_reg_write(wm8350, WM8350_DCDC3_LOW_POWER,
357 val | WM8350_DCDC_HIB_MODE_DIS);
358 break;
359 case WM8350_DCDC_4:
360 val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER);
361 wm8350->pmic.dcdc4_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
362 wm8350_reg_write(wm8350, WM8350_DCDC4_LOW_POWER,
363 val | WM8350_DCDC_HIB_MODE_DIS);
364 break;
365 case WM8350_DCDC_6:
366 val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER);
367 wm8350->pmic.dcdc6_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
368 wm8350_reg_write(wm8350, WM8350_DCDC6_LOW_POWER,
369 val | WM8350_DCDC_HIB_MODE_DIS);
370 break;
371 case WM8350_DCDC_2:
372 case WM8350_DCDC_5:
373 default:
374 return -EINVAL;
377 return 0;
380 static int wm8350_dcdc25_set_suspend_enable(struct regulator_dev *rdev)
382 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
383 int dcdc = rdev_get_id(rdev);
384 u16 val;
386 switch (dcdc) {
387 case WM8350_DCDC_2:
388 val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL)
389 & ~WM8350_DC2_HIB_MODE_MASK;
390 wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val |
391 (WM8350_DC2_HIB_MODE_ACTIVE << WM8350_DC2_HIB_MODE_SHIFT));
392 break;
393 case WM8350_DCDC_5:
394 val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL)
395 & ~WM8350_DC5_HIB_MODE_MASK;
396 wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val |
397 (WM8350_DC5_HIB_MODE_ACTIVE << WM8350_DC5_HIB_MODE_SHIFT));
398 break;
399 default:
400 return -EINVAL;
402 return 0;
405 static int wm8350_dcdc25_set_suspend_disable(struct regulator_dev *rdev)
407 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
408 int dcdc = rdev_get_id(rdev);
409 u16 val;
411 switch (dcdc) {
412 case WM8350_DCDC_2:
413 val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL)
414 & ~WM8350_DC2_HIB_MODE_MASK;
415 wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val |
416 (WM8350_DC2_HIB_MODE_DISABLE << WM8350_DC2_HIB_MODE_SHIFT));
417 break;
418 case WM8350_DCDC_5:
419 val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL)
420 & ~WM8350_DC5_HIB_MODE_MASK;
421 wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val |
422 (WM8350_DC5_HIB_MODE_DISABLE << WM8350_DC5_HIB_MODE_SHIFT));
423 break;
424 default:
425 return -EINVAL;
427 return 0;
430 static int wm8350_dcdc_set_suspend_mode(struct regulator_dev *rdev,
431 unsigned int mode)
433 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
434 int dcdc = rdev_get_id(rdev);
435 u16 *hib_mode;
437 switch (dcdc) {
438 case WM8350_DCDC_1:
439 hib_mode = &wm8350->pmic.dcdc1_hib_mode;
440 break;
441 case WM8350_DCDC_3:
442 hib_mode = &wm8350->pmic.dcdc3_hib_mode;
443 break;
444 case WM8350_DCDC_4:
445 hib_mode = &wm8350->pmic.dcdc4_hib_mode;
446 break;
447 case WM8350_DCDC_6:
448 hib_mode = &wm8350->pmic.dcdc6_hib_mode;
449 break;
450 case WM8350_DCDC_2:
451 case WM8350_DCDC_5:
452 default:
453 return -EINVAL;
456 switch (mode) {
457 case REGULATOR_MODE_NORMAL:
458 *hib_mode = WM8350_DCDC_HIB_MODE_IMAGE;
459 break;
460 case REGULATOR_MODE_IDLE:
461 *hib_mode = WM8350_DCDC_HIB_MODE_STANDBY;
462 break;
463 case REGULATOR_MODE_STANDBY:
464 *hib_mode = WM8350_DCDC_HIB_MODE_LDO_IM;
465 break;
466 default:
467 return -EINVAL;
470 return 0;
473 static const struct linear_range wm8350_ldo_ranges[] = {
474 REGULATOR_LINEAR_RANGE(900000, 0, 15, 50000),
475 REGULATOR_LINEAR_RANGE(1800000, 16, 31, 100000),
478 static int wm8350_ldo_set_suspend_voltage(struct regulator_dev *rdev, int uV)
480 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
481 int sel, volt_reg, ldo = rdev_get_id(rdev);
482 u16 val;
484 dev_dbg(wm8350->dev, "%s %d mV %d\n", __func__, ldo, uV / 1000);
486 switch (ldo) {
487 case WM8350_LDO_1:
488 volt_reg = WM8350_LDO1_LOW_POWER;
489 break;
490 case WM8350_LDO_2:
491 volt_reg = WM8350_LDO2_LOW_POWER;
492 break;
493 case WM8350_LDO_3:
494 volt_reg = WM8350_LDO3_LOW_POWER;
495 break;
496 case WM8350_LDO_4:
497 volt_reg = WM8350_LDO4_LOW_POWER;
498 break;
499 default:
500 return -EINVAL;
503 sel = regulator_map_voltage_linear_range(rdev, uV, uV);
504 if (sel < 0)
505 return sel;
507 /* all LDOs have same mV bits */
508 val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_VSEL_MASK;
509 wm8350_reg_write(wm8350, volt_reg, val | sel);
510 return 0;
513 static int wm8350_ldo_set_suspend_enable(struct regulator_dev *rdev)
515 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
516 int volt_reg, ldo = rdev_get_id(rdev);
517 u16 val;
519 switch (ldo) {
520 case WM8350_LDO_1:
521 volt_reg = WM8350_LDO1_LOW_POWER;
522 break;
523 case WM8350_LDO_2:
524 volt_reg = WM8350_LDO2_LOW_POWER;
525 break;
526 case WM8350_LDO_3:
527 volt_reg = WM8350_LDO3_LOW_POWER;
528 break;
529 case WM8350_LDO_4:
530 volt_reg = WM8350_LDO4_LOW_POWER;
531 break;
532 default:
533 return -EINVAL;
536 /* all LDOs have same mV bits */
537 val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_HIB_MODE_MASK;
538 wm8350_reg_write(wm8350, volt_reg, val);
539 return 0;
542 static int wm8350_ldo_set_suspend_disable(struct regulator_dev *rdev)
544 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
545 int volt_reg, ldo = rdev_get_id(rdev);
546 u16 val;
548 switch (ldo) {
549 case WM8350_LDO_1:
550 volt_reg = WM8350_LDO1_LOW_POWER;
551 break;
552 case WM8350_LDO_2:
553 volt_reg = WM8350_LDO2_LOW_POWER;
554 break;
555 case WM8350_LDO_3:
556 volt_reg = WM8350_LDO3_LOW_POWER;
557 break;
558 case WM8350_LDO_4:
559 volt_reg = WM8350_LDO4_LOW_POWER;
560 break;
561 default:
562 return -EINVAL;
565 /* all LDOs have same mV bits */
566 val = wm8350_reg_read(wm8350, volt_reg) & ~WM8350_LDO1_HIB_MODE_MASK;
567 wm8350_reg_write(wm8350, volt_reg, val | WM8350_LDO1_HIB_MODE_DIS);
568 return 0;
571 int wm8350_dcdc_set_slot(struct wm8350 *wm8350, int dcdc, u16 start,
572 u16 stop, u16 fault)
574 int slot_reg;
575 u16 val;
577 dev_dbg(wm8350->dev, "%s %d start %d stop %d\n",
578 __func__, dcdc, start, stop);
580 /* slot valid ? */
581 if (start > 15 || stop > 15)
582 return -EINVAL;
584 switch (dcdc) {
585 case WM8350_DCDC_1:
586 slot_reg = WM8350_DCDC1_TIMEOUTS;
587 break;
588 case WM8350_DCDC_2:
589 slot_reg = WM8350_DCDC2_TIMEOUTS;
590 break;
591 case WM8350_DCDC_3:
592 slot_reg = WM8350_DCDC3_TIMEOUTS;
593 break;
594 case WM8350_DCDC_4:
595 slot_reg = WM8350_DCDC4_TIMEOUTS;
596 break;
597 case WM8350_DCDC_5:
598 slot_reg = WM8350_DCDC5_TIMEOUTS;
599 break;
600 case WM8350_DCDC_6:
601 slot_reg = WM8350_DCDC6_TIMEOUTS;
602 break;
603 default:
604 return -EINVAL;
607 val = wm8350_reg_read(wm8350, slot_reg) &
608 ~(WM8350_DC1_ENSLOT_MASK | WM8350_DC1_SDSLOT_MASK |
609 WM8350_DC1_ERRACT_MASK);
610 wm8350_reg_write(wm8350, slot_reg,
611 val | (start << WM8350_DC1_ENSLOT_SHIFT) |
612 (stop << WM8350_DC1_SDSLOT_SHIFT) |
613 (fault << WM8350_DC1_ERRACT_SHIFT));
615 return 0;
617 EXPORT_SYMBOL_GPL(wm8350_dcdc_set_slot);
619 int wm8350_ldo_set_slot(struct wm8350 *wm8350, int ldo, u16 start, u16 stop)
621 int slot_reg;
622 u16 val;
624 dev_dbg(wm8350->dev, "%s %d start %d stop %d\n",
625 __func__, ldo, start, stop);
627 /* slot valid ? */
628 if (start > 15 || stop > 15)
629 return -EINVAL;
631 switch (ldo) {
632 case WM8350_LDO_1:
633 slot_reg = WM8350_LDO1_TIMEOUTS;
634 break;
635 case WM8350_LDO_2:
636 slot_reg = WM8350_LDO2_TIMEOUTS;
637 break;
638 case WM8350_LDO_3:
639 slot_reg = WM8350_LDO3_TIMEOUTS;
640 break;
641 case WM8350_LDO_4:
642 slot_reg = WM8350_LDO4_TIMEOUTS;
643 break;
644 default:
645 return -EINVAL;
648 val = wm8350_reg_read(wm8350, slot_reg) & ~WM8350_LDO1_SDSLOT_MASK;
649 wm8350_reg_write(wm8350, slot_reg, val | ((start << 10) | (stop << 6)));
650 return 0;
652 EXPORT_SYMBOL_GPL(wm8350_ldo_set_slot);
654 int wm8350_dcdc25_set_mode(struct wm8350 *wm8350, int dcdc, u16 mode,
655 u16 ilim, u16 ramp, u16 feedback)
657 u16 val;
659 dev_dbg(wm8350->dev, "%s %d mode: %s %s\n", __func__, dcdc,
660 mode ? "normal" : "boost", ilim ? "low" : "normal");
662 switch (dcdc) {
663 case WM8350_DCDC_2:
664 val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL)
665 & ~(WM8350_DC2_MODE_MASK | WM8350_DC2_ILIM_MASK |
666 WM8350_DC2_RMP_MASK | WM8350_DC2_FBSRC_MASK);
667 wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val |
668 (mode << WM8350_DC2_MODE_SHIFT) |
669 (ilim << WM8350_DC2_ILIM_SHIFT) |
670 (ramp << WM8350_DC2_RMP_SHIFT) |
671 (feedback << WM8350_DC2_FBSRC_SHIFT));
672 break;
673 case WM8350_DCDC_5:
674 val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL)
675 & ~(WM8350_DC5_MODE_MASK | WM8350_DC5_ILIM_MASK |
676 WM8350_DC5_RMP_MASK | WM8350_DC5_FBSRC_MASK);
677 wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val |
678 (mode << WM8350_DC5_MODE_SHIFT) |
679 (ilim << WM8350_DC5_ILIM_SHIFT) |
680 (ramp << WM8350_DC5_RMP_SHIFT) |
681 (feedback << WM8350_DC5_FBSRC_SHIFT));
682 break;
683 default:
684 return -EINVAL;
687 return 0;
689 EXPORT_SYMBOL_GPL(wm8350_dcdc25_set_mode);
691 static int force_continuous_enable(struct wm8350 *wm8350, int dcdc, int enable)
693 int reg = 0, ret;
695 switch (dcdc) {
696 case WM8350_DCDC_1:
697 reg = WM8350_DCDC1_FORCE_PWM;
698 break;
699 case WM8350_DCDC_3:
700 reg = WM8350_DCDC3_FORCE_PWM;
701 break;
702 case WM8350_DCDC_4:
703 reg = WM8350_DCDC4_FORCE_PWM;
704 break;
705 case WM8350_DCDC_6:
706 reg = WM8350_DCDC6_FORCE_PWM;
707 break;
708 default:
709 return -EINVAL;
712 if (enable)
713 ret = wm8350_set_bits(wm8350, reg,
714 WM8350_DCDC1_FORCE_PWM_ENA);
715 else
716 ret = wm8350_clear_bits(wm8350, reg,
717 WM8350_DCDC1_FORCE_PWM_ENA);
718 return ret;
721 static int wm8350_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
723 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
724 int dcdc = rdev_get_id(rdev);
725 u16 val;
727 if (dcdc < WM8350_DCDC_1 || dcdc > WM8350_DCDC_6)
728 return -EINVAL;
730 if (dcdc == WM8350_DCDC_2 || dcdc == WM8350_DCDC_5)
731 return -EINVAL;
733 val = 1 << (dcdc - WM8350_DCDC_1);
735 switch (mode) {
736 case REGULATOR_MODE_FAST:
737 /* force continuous mode */
738 wm8350_set_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val);
739 wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val);
740 force_continuous_enable(wm8350, dcdc, 1);
741 break;
742 case REGULATOR_MODE_NORMAL:
743 /* active / pulse skipping */
744 wm8350_set_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val);
745 wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val);
746 force_continuous_enable(wm8350, dcdc, 0);
747 break;
748 case REGULATOR_MODE_IDLE:
749 /* standby mode */
750 force_continuous_enable(wm8350, dcdc, 0);
751 wm8350_clear_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val);
752 wm8350_clear_bits(wm8350, WM8350_DCDC_ACTIVE_OPTIONS, val);
753 break;
754 case REGULATOR_MODE_STANDBY:
755 /* LDO mode */
756 force_continuous_enable(wm8350, dcdc, 0);
757 wm8350_set_bits(wm8350, WM8350_DCDC_SLEEP_OPTIONS, val);
758 break;
761 return 0;
764 static unsigned int wm8350_dcdc_get_mode(struct regulator_dev *rdev)
766 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
767 int dcdc = rdev_get_id(rdev);
768 u16 mask, sleep, active, force;
769 int mode = REGULATOR_MODE_NORMAL;
770 int reg;
772 switch (dcdc) {
773 case WM8350_DCDC_1:
774 reg = WM8350_DCDC1_FORCE_PWM;
775 break;
776 case WM8350_DCDC_3:
777 reg = WM8350_DCDC3_FORCE_PWM;
778 break;
779 case WM8350_DCDC_4:
780 reg = WM8350_DCDC4_FORCE_PWM;
781 break;
782 case WM8350_DCDC_6:
783 reg = WM8350_DCDC6_FORCE_PWM;
784 break;
785 default:
786 return -EINVAL;
789 mask = 1 << (dcdc - WM8350_DCDC_1);
790 active = wm8350_reg_read(wm8350, WM8350_DCDC_ACTIVE_OPTIONS) & mask;
791 force = wm8350_reg_read(wm8350, reg) & WM8350_DCDC1_FORCE_PWM_ENA;
792 sleep = wm8350_reg_read(wm8350, WM8350_DCDC_SLEEP_OPTIONS) & mask;
794 dev_dbg(wm8350->dev, "mask %x active %x sleep %x force %x",
795 mask, active, sleep, force);
797 if (active && !sleep) {
798 if (force)
799 mode = REGULATOR_MODE_FAST;
800 else
801 mode = REGULATOR_MODE_NORMAL;
802 } else if (!active && !sleep)
803 mode = REGULATOR_MODE_IDLE;
804 else if (sleep)
805 mode = REGULATOR_MODE_STANDBY;
807 return mode;
810 static unsigned int wm8350_ldo_get_mode(struct regulator_dev *rdev)
812 return REGULATOR_MODE_NORMAL;
815 struct wm8350_dcdc_efficiency {
816 int uA_load_min;
817 int uA_load_max;
818 unsigned int mode;
821 static const struct wm8350_dcdc_efficiency dcdc1_6_efficiency[] = {
822 {0, 10000, REGULATOR_MODE_STANDBY}, /* 0 - 10mA - LDO */
823 {10000, 100000, REGULATOR_MODE_IDLE}, /* 10mA - 100mA - Standby */
824 {100000, 1000000, REGULATOR_MODE_NORMAL}, /* > 100mA - Active */
825 {-1, -1, REGULATOR_MODE_NORMAL},
828 static const struct wm8350_dcdc_efficiency dcdc3_4_efficiency[] = {
829 {0, 10000, REGULATOR_MODE_STANDBY}, /* 0 - 10mA - LDO */
830 {10000, 100000, REGULATOR_MODE_IDLE}, /* 10mA - 100mA - Standby */
831 {100000, 800000, REGULATOR_MODE_NORMAL}, /* > 100mA - Active */
832 {-1, -1, REGULATOR_MODE_NORMAL},
835 static unsigned int get_mode(int uA, const struct wm8350_dcdc_efficiency *eff)
837 int i = 0;
839 while (eff[i].uA_load_min != -1) {
840 if (uA >= eff[i].uA_load_min && uA <= eff[i].uA_load_max)
841 return eff[i].mode;
842 i++;
844 return REGULATOR_MODE_NORMAL;
847 /* Query the regulator for it's most efficient mode @ uV,uA
848 * WM8350 regulator efficiency is pretty similar over
849 * different input and output uV.
851 static unsigned int wm8350_dcdc_get_optimum_mode(struct regulator_dev *rdev,
852 int input_uV, int output_uV,
853 int output_uA)
855 int dcdc = rdev_get_id(rdev), mode;
857 switch (dcdc) {
858 case WM8350_DCDC_1:
859 case WM8350_DCDC_6:
860 mode = get_mode(output_uA, dcdc1_6_efficiency);
861 break;
862 case WM8350_DCDC_3:
863 case WM8350_DCDC_4:
864 mode = get_mode(output_uA, dcdc3_4_efficiency);
865 break;
866 default:
867 mode = REGULATOR_MODE_NORMAL;
868 break;
870 return mode;
873 static const struct regulator_ops wm8350_dcdc_ops = {
874 .set_voltage_sel = regulator_set_voltage_sel_regmap,
875 .get_voltage_sel = regulator_get_voltage_sel_regmap,
876 .list_voltage = regulator_list_voltage_linear,
877 .map_voltage = regulator_map_voltage_linear,
878 .enable = regulator_enable_regmap,
879 .disable = regulator_disable_regmap,
880 .is_enabled = regulator_is_enabled_regmap,
881 .get_mode = wm8350_dcdc_get_mode,
882 .set_mode = wm8350_dcdc_set_mode,
883 .get_optimum_mode = wm8350_dcdc_get_optimum_mode,
884 .set_suspend_voltage = wm8350_dcdc_set_suspend_voltage,
885 .set_suspend_enable = wm8350_dcdc_set_suspend_enable,
886 .set_suspend_disable = wm8350_dcdc_set_suspend_disable,
887 .set_suspend_mode = wm8350_dcdc_set_suspend_mode,
890 static const struct regulator_ops wm8350_dcdc2_5_ops = {
891 .enable = regulator_enable_regmap,
892 .disable = regulator_disable_regmap,
893 .is_enabled = regulator_is_enabled_regmap,
894 .set_suspend_enable = wm8350_dcdc25_set_suspend_enable,
895 .set_suspend_disable = wm8350_dcdc25_set_suspend_disable,
898 static const struct regulator_ops wm8350_ldo_ops = {
899 .map_voltage = regulator_map_voltage_linear_range,
900 .set_voltage_sel = regulator_set_voltage_sel_regmap,
901 .get_voltage_sel = regulator_get_voltage_sel_regmap,
902 .list_voltage = regulator_list_voltage_linear_range,
903 .enable = regulator_enable_regmap,
904 .disable = regulator_disable_regmap,
905 .is_enabled = regulator_is_enabled_regmap,
906 .get_mode = wm8350_ldo_get_mode,
907 .set_suspend_voltage = wm8350_ldo_set_suspend_voltage,
908 .set_suspend_enable = wm8350_ldo_set_suspend_enable,
909 .set_suspend_disable = wm8350_ldo_set_suspend_disable,
912 static const struct regulator_ops wm8350_isink_ops = {
913 .set_current_limit = regulator_set_current_limit_regmap,
914 .get_current_limit = regulator_get_current_limit_regmap,
915 .enable = wm8350_isink_enable,
916 .disable = wm8350_isink_disable,
917 .is_enabled = wm8350_isink_is_enabled,
918 .enable_time = wm8350_isink_enable_time,
921 static const struct regulator_desc wm8350_reg[NUM_WM8350_REGULATORS] = {
923 .name = "DCDC1",
924 .id = WM8350_DCDC_1,
925 .ops = &wm8350_dcdc_ops,
926 .irq = WM8350_IRQ_UV_DC1,
927 .type = REGULATOR_VOLTAGE,
928 .n_voltages = WM8350_DCDC_MAX_VSEL + 1,
929 .min_uV = 850000,
930 .uV_step = 25000,
931 .vsel_reg = WM8350_DCDC1_CONTROL,
932 .vsel_mask = WM8350_DC1_VSEL_MASK,
933 .enable_reg = WM8350_DCDC_LDO_REQUESTED,
934 .enable_mask = WM8350_DC1_ENA,
935 .owner = THIS_MODULE,
938 .name = "DCDC2",
939 .id = WM8350_DCDC_2,
940 .ops = &wm8350_dcdc2_5_ops,
941 .irq = WM8350_IRQ_UV_DC2,
942 .type = REGULATOR_VOLTAGE,
943 .enable_reg = WM8350_DCDC_LDO_REQUESTED,
944 .enable_mask = WM8350_DC2_ENA,
945 .owner = THIS_MODULE,
948 .name = "DCDC3",
949 .id = WM8350_DCDC_3,
950 .ops = &wm8350_dcdc_ops,
951 .irq = WM8350_IRQ_UV_DC3,
952 .type = REGULATOR_VOLTAGE,
953 .n_voltages = WM8350_DCDC_MAX_VSEL + 1,
954 .min_uV = 850000,
955 .uV_step = 25000,
956 .vsel_reg = WM8350_DCDC3_CONTROL,
957 .vsel_mask = WM8350_DC3_VSEL_MASK,
958 .enable_reg = WM8350_DCDC_LDO_REQUESTED,
959 .enable_mask = WM8350_DC3_ENA,
960 .owner = THIS_MODULE,
963 .name = "DCDC4",
964 .id = WM8350_DCDC_4,
965 .ops = &wm8350_dcdc_ops,
966 .irq = WM8350_IRQ_UV_DC4,
967 .type = REGULATOR_VOLTAGE,
968 .n_voltages = WM8350_DCDC_MAX_VSEL + 1,
969 .min_uV = 850000,
970 .uV_step = 25000,
971 .vsel_reg = WM8350_DCDC4_CONTROL,
972 .vsel_mask = WM8350_DC4_VSEL_MASK,
973 .enable_reg = WM8350_DCDC_LDO_REQUESTED,
974 .enable_mask = WM8350_DC4_ENA,
975 .owner = THIS_MODULE,
978 .name = "DCDC5",
979 .id = WM8350_DCDC_5,
980 .ops = &wm8350_dcdc2_5_ops,
981 .irq = WM8350_IRQ_UV_DC5,
982 .type = REGULATOR_VOLTAGE,
983 .enable_reg = WM8350_DCDC_LDO_REQUESTED,
984 .enable_mask = WM8350_DC5_ENA,
985 .owner = THIS_MODULE,
988 .name = "DCDC6",
989 .id = WM8350_DCDC_6,
990 .ops = &wm8350_dcdc_ops,
991 .irq = WM8350_IRQ_UV_DC6,
992 .type = REGULATOR_VOLTAGE,
993 .n_voltages = WM8350_DCDC_MAX_VSEL + 1,
994 .min_uV = 850000,
995 .uV_step = 25000,
996 .vsel_reg = WM8350_DCDC6_CONTROL,
997 .vsel_mask = WM8350_DC6_VSEL_MASK,
998 .enable_reg = WM8350_DCDC_LDO_REQUESTED,
999 .enable_mask = WM8350_DC6_ENA,
1000 .owner = THIS_MODULE,
1003 .name = "LDO1",
1004 .id = WM8350_LDO_1,
1005 .ops = &wm8350_ldo_ops,
1006 .irq = WM8350_IRQ_UV_LDO1,
1007 .type = REGULATOR_VOLTAGE,
1008 .n_voltages = WM8350_LDO1_VSEL_MASK + 1,
1009 .linear_ranges = wm8350_ldo_ranges,
1010 .n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
1011 .vsel_reg = WM8350_LDO1_CONTROL,
1012 .vsel_mask = WM8350_LDO1_VSEL_MASK,
1013 .enable_reg = WM8350_DCDC_LDO_REQUESTED,
1014 .enable_mask = WM8350_LDO1_ENA,
1015 .owner = THIS_MODULE,
1018 .name = "LDO2",
1019 .id = WM8350_LDO_2,
1020 .ops = &wm8350_ldo_ops,
1021 .irq = WM8350_IRQ_UV_LDO2,
1022 .type = REGULATOR_VOLTAGE,
1023 .n_voltages = WM8350_LDO2_VSEL_MASK + 1,
1024 .linear_ranges = wm8350_ldo_ranges,
1025 .n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
1026 .vsel_reg = WM8350_LDO2_CONTROL,
1027 .vsel_mask = WM8350_LDO2_VSEL_MASK,
1028 .enable_reg = WM8350_DCDC_LDO_REQUESTED,
1029 .enable_mask = WM8350_LDO2_ENA,
1030 .owner = THIS_MODULE,
1033 .name = "LDO3",
1034 .id = WM8350_LDO_3,
1035 .ops = &wm8350_ldo_ops,
1036 .irq = WM8350_IRQ_UV_LDO3,
1037 .type = REGULATOR_VOLTAGE,
1038 .n_voltages = WM8350_LDO3_VSEL_MASK + 1,
1039 .linear_ranges = wm8350_ldo_ranges,
1040 .n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
1041 .vsel_reg = WM8350_LDO3_CONTROL,
1042 .vsel_mask = WM8350_LDO3_VSEL_MASK,
1043 .enable_reg = WM8350_DCDC_LDO_REQUESTED,
1044 .enable_mask = WM8350_LDO3_ENA,
1045 .owner = THIS_MODULE,
1048 .name = "LDO4",
1049 .id = WM8350_LDO_4,
1050 .ops = &wm8350_ldo_ops,
1051 .irq = WM8350_IRQ_UV_LDO4,
1052 .type = REGULATOR_VOLTAGE,
1053 .n_voltages = WM8350_LDO4_VSEL_MASK + 1,
1054 .linear_ranges = wm8350_ldo_ranges,
1055 .n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
1056 .vsel_reg = WM8350_LDO4_CONTROL,
1057 .vsel_mask = WM8350_LDO4_VSEL_MASK,
1058 .enable_reg = WM8350_DCDC_LDO_REQUESTED,
1059 .enable_mask = WM8350_LDO4_ENA,
1060 .owner = THIS_MODULE,
1063 .name = "ISINKA",
1064 .id = WM8350_ISINK_A,
1065 .ops = &wm8350_isink_ops,
1066 .irq = WM8350_IRQ_CS1,
1067 .type = REGULATOR_CURRENT,
1068 .owner = THIS_MODULE,
1069 .curr_table = isink_cur,
1070 .n_current_limits = ARRAY_SIZE(isink_cur),
1071 .csel_reg = WM8350_CURRENT_SINK_DRIVER_A,
1072 .csel_mask = WM8350_CS1_ISEL_MASK,
1075 .name = "ISINKB",
1076 .id = WM8350_ISINK_B,
1077 .ops = &wm8350_isink_ops,
1078 .irq = WM8350_IRQ_CS2,
1079 .type = REGULATOR_CURRENT,
1080 .owner = THIS_MODULE,
1081 .curr_table = isink_cur,
1082 .n_current_limits = ARRAY_SIZE(isink_cur),
1083 .csel_reg = WM8350_CURRENT_SINK_DRIVER_B,
1084 .csel_mask = WM8350_CS2_ISEL_MASK,
1088 static irqreturn_t pmic_uv_handler(int irq, void *data)
1090 struct regulator_dev *rdev = (struct regulator_dev *)data;
1092 if (irq == WM8350_IRQ_CS1 || irq == WM8350_IRQ_CS2)
1093 regulator_notifier_call_chain(rdev,
1094 REGULATOR_EVENT_REGULATION_OUT,
1095 NULL);
1096 else
1097 regulator_notifier_call_chain(rdev,
1098 REGULATOR_EVENT_UNDER_VOLTAGE,
1099 NULL);
1101 return IRQ_HANDLED;
1104 static int wm8350_regulator_probe(struct platform_device *pdev)
1106 struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev);
1107 struct regulator_config config = { };
1108 struct regulator_dev *rdev;
1109 int ret;
1110 u16 val;
1112 if (pdev->id < WM8350_DCDC_1 || pdev->id > WM8350_ISINK_B)
1113 return -ENODEV;
1115 /* do any regulatior specific init */
1116 switch (pdev->id) {
1117 case WM8350_DCDC_1:
1118 val = wm8350_reg_read(wm8350, WM8350_DCDC1_LOW_POWER);
1119 wm8350->pmic.dcdc1_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
1120 break;
1121 case WM8350_DCDC_3:
1122 val = wm8350_reg_read(wm8350, WM8350_DCDC3_LOW_POWER);
1123 wm8350->pmic.dcdc3_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
1124 break;
1125 case WM8350_DCDC_4:
1126 val = wm8350_reg_read(wm8350, WM8350_DCDC4_LOW_POWER);
1127 wm8350->pmic.dcdc4_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
1128 break;
1129 case WM8350_DCDC_6:
1130 val = wm8350_reg_read(wm8350, WM8350_DCDC6_LOW_POWER);
1131 wm8350->pmic.dcdc6_hib_mode = val & WM8350_DCDC_HIB_MODE_MASK;
1132 break;
1135 config.dev = &pdev->dev;
1136 config.init_data = dev_get_platdata(&pdev->dev);
1137 config.driver_data = dev_get_drvdata(&pdev->dev);
1138 config.regmap = wm8350->regmap;
1140 /* register regulator */
1141 rdev = devm_regulator_register(&pdev->dev, &wm8350_reg[pdev->id],
1142 &config);
1143 if (IS_ERR(rdev)) {
1144 dev_err(&pdev->dev, "failed to register %s\n",
1145 wm8350_reg[pdev->id].name);
1146 return PTR_ERR(rdev);
1149 /* register regulator IRQ */
1150 ret = wm8350_register_irq(wm8350, wm8350_reg[pdev->id].irq,
1151 pmic_uv_handler, 0, "UV", rdev);
1152 if (ret < 0) {
1153 dev_err(&pdev->dev, "failed to register regulator %s IRQ\n",
1154 wm8350_reg[pdev->id].name);
1155 return ret;
1158 return 0;
1161 static int wm8350_regulator_remove(struct platform_device *pdev)
1163 struct regulator_dev *rdev = platform_get_drvdata(pdev);
1164 struct wm8350 *wm8350 = rdev_get_drvdata(rdev);
1166 wm8350_free_irq(wm8350, wm8350_reg[pdev->id].irq, rdev);
1168 return 0;
1171 int wm8350_register_regulator(struct wm8350 *wm8350, int reg,
1172 struct regulator_init_data *initdata)
1174 struct platform_device *pdev;
1175 int ret;
1176 if (reg < 0 || reg >= NUM_WM8350_REGULATORS)
1177 return -EINVAL;
1179 if (wm8350->pmic.pdev[reg])
1180 return -EBUSY;
1182 if (reg >= WM8350_DCDC_1 && reg <= WM8350_DCDC_6 &&
1183 reg > wm8350->pmic.max_dcdc)
1184 return -ENODEV;
1185 if (reg >= WM8350_ISINK_A && reg <= WM8350_ISINK_B &&
1186 reg > wm8350->pmic.max_isink)
1187 return -ENODEV;
1189 pdev = platform_device_alloc("wm8350-regulator", reg);
1190 if (!pdev)
1191 return -ENOMEM;
1193 wm8350->pmic.pdev[reg] = pdev;
1195 initdata->driver_data = wm8350;
1197 pdev->dev.platform_data = initdata;
1198 pdev->dev.parent = wm8350->dev;
1199 platform_set_drvdata(pdev, wm8350);
1201 ret = platform_device_add(pdev);
1203 if (ret != 0) {
1204 dev_err(wm8350->dev, "Failed to register regulator %d: %d\n",
1205 reg, ret);
1206 platform_device_put(pdev);
1207 wm8350->pmic.pdev[reg] = NULL;
1210 return ret;
1212 EXPORT_SYMBOL_GPL(wm8350_register_regulator);
1215 * wm8350_register_led - Register a WM8350 LED output
1217 * @wm8350: The WM8350 device to configure.
1218 * @lednum: LED device index to create.
1219 * @dcdc: The DCDC to use for the LED.
1220 * @isink: The ISINK to use for the LED.
1221 * @pdata: Configuration for the LED.
1223 * The WM8350 supports the use of an ISINK together with a DCDC to
1224 * provide a power-efficient LED driver. This function registers the
1225 * regulators and instantiates the platform device for a LED. The
1226 * operating modes for the LED regulators must be configured using
1227 * wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and
1228 * wm8350_dcdc_set_slot() prior to calling this function.
1230 int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink,
1231 struct wm8350_led_platform_data *pdata)
1233 struct wm8350_led *led;
1234 struct platform_device *pdev;
1235 int ret;
1237 if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) {
1238 dev_err(wm8350->dev, "Invalid LED index %d\n", lednum);
1239 return -ENODEV;
1242 led = &wm8350->pmic.led[lednum];
1244 if (led->pdev) {
1245 dev_err(wm8350->dev, "LED %d already allocated\n", lednum);
1246 return -EINVAL;
1249 pdev = platform_device_alloc("wm8350-led", lednum);
1250 if (pdev == NULL) {
1251 dev_err(wm8350->dev, "Failed to allocate LED %d\n", lednum);
1252 return -ENOMEM;
1255 led->isink_consumer.dev_name = dev_name(&pdev->dev);
1256 led->isink_consumer.supply = "led_isink";
1257 led->isink_init.num_consumer_supplies = 1;
1258 led->isink_init.consumer_supplies = &led->isink_consumer;
1259 led->isink_init.constraints.min_uA = 0;
1260 led->isink_init.constraints.max_uA = pdata->max_uA;
1261 led->isink_init.constraints.valid_ops_mask
1262 = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS;
1263 led->isink_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL;
1264 ret = wm8350_register_regulator(wm8350, isink, &led->isink_init);
1265 if (ret != 0) {
1266 platform_device_put(pdev);
1267 return ret;
1270 led->dcdc_consumer.dev_name = dev_name(&pdev->dev);
1271 led->dcdc_consumer.supply = "led_vcc";
1272 led->dcdc_init.num_consumer_supplies = 1;
1273 led->dcdc_init.consumer_supplies = &led->dcdc_consumer;
1274 led->dcdc_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL;
1275 led->dcdc_init.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
1276 ret = wm8350_register_regulator(wm8350, dcdc, &led->dcdc_init);
1277 if (ret != 0) {
1278 platform_device_put(pdev);
1279 return ret;
1282 switch (isink) {
1283 case WM8350_ISINK_A:
1284 wm8350->pmic.isink_A_dcdc = dcdc;
1285 break;
1286 case WM8350_ISINK_B:
1287 wm8350->pmic.isink_B_dcdc = dcdc;
1288 break;
1291 pdev->dev.platform_data = pdata;
1292 pdev->dev.parent = wm8350->dev;
1293 ret = platform_device_add(pdev);
1294 if (ret != 0) {
1295 dev_err(wm8350->dev, "Failed to register LED %d: %d\n",
1296 lednum, ret);
1297 platform_device_put(pdev);
1298 return ret;
1301 led->pdev = pdev;
1303 return 0;
1305 EXPORT_SYMBOL_GPL(wm8350_register_led);
1307 static struct platform_driver wm8350_regulator_driver = {
1308 .probe = wm8350_regulator_probe,
1309 .remove = wm8350_regulator_remove,
1310 .driver = {
1311 .name = "wm8350-regulator",
1315 static int __init wm8350_regulator_init(void)
1317 return platform_driver_register(&wm8350_regulator_driver);
1319 subsys_initcall(wm8350_regulator_init);
1321 static void __exit wm8350_regulator_exit(void)
1323 platform_driver_unregister(&wm8350_regulator_driver);
1325 module_exit(wm8350_regulator_exit);
1327 /* Module information */
1328 MODULE_AUTHOR("Liam Girdwood");
1329 MODULE_DESCRIPTION("WM8350 voltage and current regulator driver");
1330 MODULE_LICENSE("GPL");
1331 MODULE_ALIAS("platform:wm8350-regulator");