2 * hid-cp2112.c - Silicon Labs HID USB to SMBus master bridge
3 * Copyright (c) 2013,2014 Uplogix, Inc.
4 * David Barksdale <dbarksdale@uplogix.com>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * The Silicon Labs CP2112 chip is a USB HID device which provides an
18 * SMBus controller for talking to slave devices and 8 GPIO pins. The
19 * host communicates with the CP2112 via raw HID reports.
22 * http://www.silabs.com/Support%20Documents/TechnicalDocs/CP2112.pdf
23 * Programming Interface Specification:
24 * http://www.silabs.com/Support%20Documents/TechnicalDocs/AN495.pdf
27 #include <linux/gpio.h>
28 #include <linux/gpio/driver.h>
29 #include <linux/hid.h>
30 #include <linux/hidraw.h>
31 #include <linux/i2c.h>
32 #include <linux/module.h>
33 #include <linux/nls.h>
34 #include <linux/usb/ch9.h>
37 #define CP2112_REPORT_MAX_LENGTH 64
38 #define CP2112_GPIO_CONFIG_LENGTH 5
39 #define CP2112_GPIO_GET_LENGTH 2
40 #define CP2112_GPIO_SET_LENGTH 3
43 CP2112_GPIO_CONFIG
= 0x02,
44 CP2112_GPIO_GET
= 0x03,
45 CP2112_GPIO_SET
= 0x04,
46 CP2112_GET_VERSION_INFO
= 0x05,
47 CP2112_SMBUS_CONFIG
= 0x06,
48 CP2112_DATA_READ_REQUEST
= 0x10,
49 CP2112_DATA_WRITE_READ_REQUEST
= 0x11,
50 CP2112_DATA_READ_FORCE_SEND
= 0x12,
51 CP2112_DATA_READ_RESPONSE
= 0x13,
52 CP2112_DATA_WRITE_REQUEST
= 0x14,
53 CP2112_TRANSFER_STATUS_REQUEST
= 0x15,
54 CP2112_TRANSFER_STATUS_RESPONSE
= 0x16,
55 CP2112_CANCEL_TRANSFER
= 0x17,
56 CP2112_LOCK_BYTE
= 0x20,
57 CP2112_USB_CONFIG
= 0x21,
58 CP2112_MANUFACTURER_STRING
= 0x22,
59 CP2112_PRODUCT_STRING
= 0x23,
60 CP2112_SERIAL_STRING
= 0x24,
66 STATUS0_COMPLETE
= 0x02,
71 STATUS1_TIMEOUT_NACK
= 0x00,
72 STATUS1_TIMEOUT_BUS
= 0x01,
73 STATUS1_ARBITRATION_LOST
= 0x02,
74 STATUS1_READ_INCOMPLETE
= 0x03,
75 STATUS1_WRITE_INCOMPLETE
= 0x04,
76 STATUS1_SUCCESS
= 0x05,
79 struct cp2112_smbus_config_report
{
80 u8 report
; /* CP2112_SMBUS_CONFIG */
81 __be32 clock_speed
; /* Hz */
82 u8 device_address
; /* Stored in the upper 7 bits */
83 u8 auto_send_read
; /* 1 = enabled, 0 = disabled */
84 __be16 write_timeout
; /* ms, 0 = no timeout */
85 __be16 read_timeout
; /* ms, 0 = no timeout */
86 u8 scl_low_timeout
; /* 1 = enabled, 0 = disabled */
87 __be16 retry_time
; /* # of retries, 0 = no limit */
90 struct cp2112_usb_config_report
{
91 u8 report
; /* CP2112_USB_CONFIG */
92 __le16 vid
; /* Vendor ID */
93 __le16 pid
; /* Product ID */
94 u8 max_power
; /* Power requested in 2mA units */
95 u8 power_mode
; /* 0x00 = bus powered
96 0x01 = self powered & regulator off
97 0x02 = self powered & regulator on */
100 u8 mask
; /* What fields to program */
103 struct cp2112_read_req_report
{
104 u8 report
; /* CP2112_DATA_READ_REQUEST */
109 struct cp2112_write_read_req_report
{
110 u8 report
; /* CP2112_DATA_WRITE_READ_REQUEST */
113 u8 target_address_length
;
114 u8 target_address
[16];
117 struct cp2112_write_req_report
{
118 u8 report
; /* CP2112_DATA_WRITE_REQUEST */
124 struct cp2112_force_read_report
{
125 u8 report
; /* CP2112_DATA_READ_FORCE_SEND */
129 struct cp2112_xfer_status_report
{
130 u8 report
; /* CP2112_TRANSFER_STATUS_RESPONSE */
131 u8 status0
; /* STATUS0_* */
132 u8 status1
; /* STATUS1_* */
137 struct cp2112_string_report
{
138 u8 dummy
; /* force .string to be aligned */
139 u8 report
; /* CP2112_*_STRING */
140 u8 length
; /* length in bytes of everyting after .report */
141 u8 type
; /* USB_DT_STRING */
142 wchar_t string
[30]; /* UTF16_LITTLE_ENDIAN string */
145 /* Number of times to request transfer status before giving up waiting for a
146 transfer to complete. This may need to be changed if SMBUS clock, retries,
147 or read/write/scl_low timeout settings are changed. */
148 static const int XFER_STATUS_RETRIES
= 10;
150 /* Time in ms to wait for a CP2112_DATA_READ_RESPONSE or
151 CP2112_TRANSFER_STATUS_RESPONSE. */
152 static const int RESPONSE_TIMEOUT
= 50;
154 static const struct hid_device_id cp2112_devices
[] = {
155 { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL
, USB_DEVICE_ID_CYGNAL_CP2112
) },
158 MODULE_DEVICE_TABLE(hid
, cp2112_devices
);
160 struct cp2112_device
{
161 struct i2c_adapter adap
;
162 struct hid_device
*hdev
;
163 wait_queue_head_t wait
;
174 struct gpio_desc
*desc
[8];
176 struct delayed_work gpio_poll_worker
;
177 unsigned long irq_mask
;
181 static int gpio_push_pull
= 0xFF;
182 module_param(gpio_push_pull
, int, S_IRUGO
| S_IWUSR
);
183 MODULE_PARM_DESC(gpio_push_pull
, "GPIO push-pull configuration bitmask");
185 static int cp2112_gpio_direction_input(struct gpio_chip
*chip
, unsigned offset
)
187 struct cp2112_device
*dev
= gpiochip_get_data(chip
);
188 struct hid_device
*hdev
= dev
->hdev
;
189 u8
*buf
= dev
->in_out_buffer
;
192 mutex_lock(&dev
->lock
);
194 ret
= hid_hw_raw_request(hdev
, CP2112_GPIO_CONFIG
, buf
,
195 CP2112_GPIO_CONFIG_LENGTH
, HID_FEATURE_REPORT
,
197 if (ret
!= CP2112_GPIO_CONFIG_LENGTH
) {
198 hid_err(hdev
, "error requesting GPIO config: %d\n", ret
);
202 buf
[1] &= ~(1 << offset
);
203 buf
[2] = gpio_push_pull
;
205 ret
= hid_hw_raw_request(hdev
, CP2112_GPIO_CONFIG
, buf
,
206 CP2112_GPIO_CONFIG_LENGTH
, HID_FEATURE_REPORT
,
209 hid_err(hdev
, "error setting GPIO config: %d\n", ret
);
216 mutex_unlock(&dev
->lock
);
217 return ret
< 0 ? ret
: -EIO
;
220 static void cp2112_gpio_set(struct gpio_chip
*chip
, unsigned offset
, int value
)
222 struct cp2112_device
*dev
= gpiochip_get_data(chip
);
223 struct hid_device
*hdev
= dev
->hdev
;
224 u8
*buf
= dev
->in_out_buffer
;
227 mutex_lock(&dev
->lock
);
229 buf
[0] = CP2112_GPIO_SET
;
230 buf
[1] = value
? 0xff : 0;
231 buf
[2] = 1 << offset
;
233 ret
= hid_hw_raw_request(hdev
, CP2112_GPIO_SET
, buf
,
234 CP2112_GPIO_SET_LENGTH
, HID_FEATURE_REPORT
,
237 hid_err(hdev
, "error setting GPIO values: %d\n", ret
);
239 mutex_unlock(&dev
->lock
);
242 static int cp2112_gpio_get_all(struct gpio_chip
*chip
)
244 struct cp2112_device
*dev
= gpiochip_get_data(chip
);
245 struct hid_device
*hdev
= dev
->hdev
;
246 u8
*buf
= dev
->in_out_buffer
;
249 mutex_lock(&dev
->lock
);
251 ret
= hid_hw_raw_request(hdev
, CP2112_GPIO_GET
, buf
,
252 CP2112_GPIO_GET_LENGTH
, HID_FEATURE_REPORT
,
254 if (ret
!= CP2112_GPIO_GET_LENGTH
) {
255 hid_err(hdev
, "error requesting GPIO values: %d\n", ret
);
256 ret
= ret
< 0 ? ret
: -EIO
;
263 mutex_unlock(&dev
->lock
);
268 static int cp2112_gpio_get(struct gpio_chip
*chip
, unsigned int offset
)
272 ret
= cp2112_gpio_get_all(chip
);
276 return (ret
>> offset
) & 1;
279 static int cp2112_gpio_direction_output(struct gpio_chip
*chip
,
280 unsigned offset
, int value
)
282 struct cp2112_device
*dev
= gpiochip_get_data(chip
);
283 struct hid_device
*hdev
= dev
->hdev
;
284 u8
*buf
= dev
->in_out_buffer
;
287 mutex_lock(&dev
->lock
);
289 ret
= hid_hw_raw_request(hdev
, CP2112_GPIO_CONFIG
, buf
,
290 CP2112_GPIO_CONFIG_LENGTH
, HID_FEATURE_REPORT
,
292 if (ret
!= CP2112_GPIO_CONFIG_LENGTH
) {
293 hid_err(hdev
, "error requesting GPIO config: %d\n", ret
);
297 buf
[1] |= 1 << offset
;
298 buf
[2] = gpio_push_pull
;
300 ret
= hid_hw_raw_request(hdev
, CP2112_GPIO_CONFIG
, buf
,
301 CP2112_GPIO_CONFIG_LENGTH
, HID_FEATURE_REPORT
,
304 hid_err(hdev
, "error setting GPIO config: %d\n", ret
);
308 mutex_unlock(&dev
->lock
);
311 * Set gpio value when output direction is already set,
312 * as specified in AN495, Rev. 0.2, cpt. 4.4
314 cp2112_gpio_set(chip
, offset
, value
);
319 mutex_unlock(&dev
->lock
);
320 return ret
< 0 ? ret
: -EIO
;
323 static int cp2112_hid_get(struct hid_device
*hdev
, unsigned char report_number
,
324 u8
*data
, size_t count
, unsigned char report_type
)
329 buf
= kmalloc(count
, GFP_KERNEL
);
333 ret
= hid_hw_raw_request(hdev
, report_number
, buf
, count
,
334 report_type
, HID_REQ_GET_REPORT
);
335 memcpy(data
, buf
, count
);
340 static int cp2112_hid_output(struct hid_device
*hdev
, u8
*data
, size_t count
,
341 unsigned char report_type
)
346 buf
= kmemdup(data
, count
, GFP_KERNEL
);
350 if (report_type
== HID_OUTPUT_REPORT
)
351 ret
= hid_hw_output_report(hdev
, buf
, count
);
353 ret
= hid_hw_raw_request(hdev
, buf
[0], buf
, count
, report_type
,
360 static int cp2112_wait(struct cp2112_device
*dev
, atomic_t
*avail
)
364 /* We have sent either a CP2112_TRANSFER_STATUS_REQUEST or a
365 * CP2112_DATA_READ_FORCE_SEND and we are waiting for the response to
366 * come in cp2112_raw_event or timeout. There will only be one of these
367 * in flight at any one time. The timeout is extremely large and is a
368 * last resort if the CP2112 has died. If we do timeout we don't expect
369 * to receive the response which would cause data races, it's not like
370 * we can do anything about it anyway.
372 ret
= wait_event_interruptible_timeout(dev
->wait
,
373 atomic_read(avail
), msecs_to_jiffies(RESPONSE_TIMEOUT
));
374 if (-ERESTARTSYS
== ret
)
379 atomic_set(avail
, 0);
383 static int cp2112_xfer_status(struct cp2112_device
*dev
)
385 struct hid_device
*hdev
= dev
->hdev
;
389 buf
[0] = CP2112_TRANSFER_STATUS_REQUEST
;
391 atomic_set(&dev
->xfer_avail
, 0);
393 ret
= cp2112_hid_output(hdev
, buf
, 2, HID_OUTPUT_REPORT
);
395 hid_warn(hdev
, "Error requesting status: %d\n", ret
);
399 ret
= cp2112_wait(dev
, &dev
->xfer_avail
);
403 return dev
->xfer_status
;
406 static int cp2112_read(struct cp2112_device
*dev
, u8
*data
, size_t size
)
408 struct hid_device
*hdev
= dev
->hdev
;
409 struct cp2112_force_read_report report
;
412 if (size
> sizeof(dev
->read_data
))
413 size
= sizeof(dev
->read_data
);
414 report
.report
= CP2112_DATA_READ_FORCE_SEND
;
415 report
.length
= cpu_to_be16(size
);
417 atomic_set(&dev
->read_avail
, 0);
419 ret
= cp2112_hid_output(hdev
, &report
.report
, sizeof(report
),
422 hid_warn(hdev
, "Error requesting data: %d\n", ret
);
426 ret
= cp2112_wait(dev
, &dev
->read_avail
);
430 hid_dbg(hdev
, "read %d of %zd bytes requested\n",
431 dev
->read_length
, size
);
433 if (size
> dev
->read_length
)
434 size
= dev
->read_length
;
436 memcpy(data
, dev
->read_data
, size
);
437 return dev
->read_length
;
440 static int cp2112_read_req(void *buf
, u8 slave_address
, u16 length
)
442 struct cp2112_read_req_report
*report
= buf
;
444 if (length
< 1 || length
> 512)
447 report
->report
= CP2112_DATA_READ_REQUEST
;
448 report
->slave_address
= slave_address
<< 1;
449 report
->length
= cpu_to_be16(length
);
450 return sizeof(*report
);
453 static int cp2112_write_read_req(void *buf
, u8 slave_address
, u16 length
,
454 u8 command
, u8
*data
, u8 data_length
)
456 struct cp2112_write_read_req_report
*report
= buf
;
458 if (length
< 1 || length
> 512
459 || data_length
> sizeof(report
->target_address
) - 1)
462 report
->report
= CP2112_DATA_WRITE_READ_REQUEST
;
463 report
->slave_address
= slave_address
<< 1;
464 report
->length
= cpu_to_be16(length
);
465 report
->target_address_length
= data_length
+ 1;
466 report
->target_address
[0] = command
;
467 memcpy(&report
->target_address
[1], data
, data_length
);
468 return data_length
+ 6;
471 static int cp2112_write_req(void *buf
, u8 slave_address
, u8 command
, u8
*data
,
474 struct cp2112_write_req_report
*report
= buf
;
476 if (data_length
> sizeof(report
->data
) - 1)
479 report
->report
= CP2112_DATA_WRITE_REQUEST
;
480 report
->slave_address
= slave_address
<< 1;
481 report
->length
= data_length
+ 1;
482 report
->data
[0] = command
;
483 memcpy(&report
->data
[1], data
, data_length
);
484 return data_length
+ 4;
487 static int cp2112_i2c_write_req(void *buf
, u8 slave_address
, u8
*data
,
490 struct cp2112_write_req_report
*report
= buf
;
492 if (data_length
> sizeof(report
->data
))
495 report
->report
= CP2112_DATA_WRITE_REQUEST
;
496 report
->slave_address
= slave_address
<< 1;
497 report
->length
= data_length
;
498 memcpy(report
->data
, data
, data_length
);
499 return data_length
+ 3;
502 static int cp2112_i2c_write_read_req(void *buf
, u8 slave_address
,
503 u8
*addr
, int addr_length
,
506 struct cp2112_write_read_req_report
*report
= buf
;
508 if (read_length
< 1 || read_length
> 512 ||
509 addr_length
> sizeof(report
->target_address
))
512 report
->report
= CP2112_DATA_WRITE_READ_REQUEST
;
513 report
->slave_address
= slave_address
<< 1;
514 report
->length
= cpu_to_be16(read_length
);
515 report
->target_address_length
= addr_length
;
516 memcpy(report
->target_address
, addr
, addr_length
);
517 return addr_length
+ 5;
520 static int cp2112_i2c_xfer(struct i2c_adapter
*adap
, struct i2c_msg
*msgs
,
523 struct cp2112_device
*dev
= (struct cp2112_device
*)adap
->algo_data
;
524 struct hid_device
*hdev
= dev
->hdev
;
527 ssize_t read_length
= 0;
529 unsigned int retries
;
532 hid_dbg(hdev
, "I2C %d messages\n", num
);
535 if (msgs
->flags
& I2C_M_RD
) {
536 hid_dbg(hdev
, "I2C read %#04x len %d\n",
537 msgs
->addr
, msgs
->len
);
538 read_length
= msgs
->len
;
539 read_buf
= msgs
->buf
;
540 count
= cp2112_read_req(buf
, msgs
->addr
, msgs
->len
);
542 hid_dbg(hdev
, "I2C write %#04x len %d\n",
543 msgs
->addr
, msgs
->len
);
544 count
= cp2112_i2c_write_req(buf
, msgs
->addr
,
545 msgs
->buf
, msgs
->len
);
549 } else if (dev
->hwversion
> 1 && /* no repeated start in rev 1 */
551 msgs
[0].addr
== msgs
[1].addr
&&
552 !(msgs
[0].flags
& I2C_M_RD
) && (msgs
[1].flags
& I2C_M_RD
)) {
553 hid_dbg(hdev
, "I2C write-read %#04x wlen %d rlen %d\n",
554 msgs
[0].addr
, msgs
[0].len
, msgs
[1].len
);
555 read_length
= msgs
[1].len
;
556 read_buf
= msgs
[1].buf
;
557 count
= cp2112_i2c_write_read_req(buf
, msgs
[0].addr
,
558 msgs
[0].buf
, msgs
[0].len
, msgs
[1].len
);
563 "Multi-message I2C transactions not supported\n");
567 ret
= hid_hw_power(hdev
, PM_HINT_FULLON
);
569 hid_err(hdev
, "power management error: %d\n", ret
);
573 ret
= cp2112_hid_output(hdev
, buf
, count
, HID_OUTPUT_REPORT
);
575 hid_warn(hdev
, "Error starting transaction: %d\n", ret
);
579 for (retries
= 0; retries
< XFER_STATUS_RETRIES
; ++retries
) {
580 ret
= cp2112_xfer_status(dev
);
588 if (XFER_STATUS_RETRIES
<= retries
) {
589 hid_warn(hdev
, "Transfer timed out, cancelling.\n");
590 buf
[0] = CP2112_CANCEL_TRANSFER
;
593 ret
= cp2112_hid_output(hdev
, buf
, 2, HID_OUTPUT_REPORT
);
595 hid_warn(hdev
, "Error cancelling transaction: %d\n",
602 for (count
= 0; count
< read_length
;) {
603 ret
= cp2112_read(dev
, read_buf
+ count
, read_length
- count
);
607 hid_err(hdev
, "read returned 0\n");
612 if (count
> read_length
) {
614 * The hardware returned too much data.
615 * This is mostly harmless because cp2112_read()
616 * has a limit check so didn't overrun our
617 * buffer. Nevertheless, we return an error
618 * because something is seriously wrong and
619 * it shouldn't go unnoticed.
621 hid_err(hdev
, "long read: %d > %zd\n",
622 ret
, read_length
- count
+ ret
);
628 /* return the number of transferred messages */
632 hid_hw_power(hdev
, PM_HINT_NORMAL
);
633 hid_dbg(hdev
, "I2C transfer finished: %d\n", ret
);
637 static int cp2112_xfer(struct i2c_adapter
*adap
, u16 addr
,
638 unsigned short flags
, char read_write
, u8 command
,
639 int size
, union i2c_smbus_data
*data
)
641 struct cp2112_device
*dev
= (struct cp2112_device
*)adap
->algo_data
;
642 struct hid_device
*hdev
= dev
->hdev
;
646 size_t read_length
= 0;
647 unsigned int retries
;
650 hid_dbg(hdev
, "%s addr 0x%x flags 0x%x cmd 0x%x size %d\n",
651 read_write
== I2C_SMBUS_WRITE
? "write" : "read",
652 addr
, flags
, command
, size
);
658 if (I2C_SMBUS_READ
== read_write
)
659 count
= cp2112_read_req(buf
, addr
, read_length
);
661 count
= cp2112_write_req(buf
, addr
, command
, NULL
,
664 case I2C_SMBUS_BYTE_DATA
:
667 if (I2C_SMBUS_READ
== read_write
)
668 count
= cp2112_write_read_req(buf
, addr
, read_length
,
671 count
= cp2112_write_req(buf
, addr
, command
,
674 case I2C_SMBUS_WORD_DATA
:
676 word
= cpu_to_le16(data
->word
);
678 if (I2C_SMBUS_READ
== read_write
)
679 count
= cp2112_write_read_req(buf
, addr
, read_length
,
682 count
= cp2112_write_req(buf
, addr
, command
,
685 case I2C_SMBUS_PROC_CALL
:
686 size
= I2C_SMBUS_WORD_DATA
;
687 read_write
= I2C_SMBUS_READ
;
689 word
= cpu_to_le16(data
->word
);
691 count
= cp2112_write_read_req(buf
, addr
, read_length
, command
,
694 case I2C_SMBUS_I2C_BLOCK_DATA
:
695 size
= I2C_SMBUS_BLOCK_DATA
;
697 case I2C_SMBUS_BLOCK_DATA
:
698 if (I2C_SMBUS_READ
== read_write
) {
699 count
= cp2112_write_read_req(buf
, addr
,
703 count
= cp2112_write_req(buf
, addr
, command
,
708 case I2C_SMBUS_BLOCK_PROC_CALL
:
709 size
= I2C_SMBUS_BLOCK_DATA
;
710 read_write
= I2C_SMBUS_READ
;
712 count
= cp2112_write_read_req(buf
, addr
, I2C_SMBUS_BLOCK_MAX
,
713 command
, data
->block
,
717 hid_warn(hdev
, "Unsupported transaction %d\n", size
);
724 ret
= hid_hw_power(hdev
, PM_HINT_FULLON
);
726 hid_err(hdev
, "power management error: %d\n", ret
);
730 ret
= cp2112_hid_output(hdev
, buf
, count
, HID_OUTPUT_REPORT
);
732 hid_warn(hdev
, "Error starting transaction: %d\n", ret
);
736 for (retries
= 0; retries
< XFER_STATUS_RETRIES
; ++retries
) {
737 ret
= cp2112_xfer_status(dev
);
745 if (XFER_STATUS_RETRIES
<= retries
) {
746 hid_warn(hdev
, "Transfer timed out, cancelling.\n");
747 buf
[0] = CP2112_CANCEL_TRANSFER
;
750 ret
= cp2112_hid_output(hdev
, buf
, 2, HID_OUTPUT_REPORT
);
752 hid_warn(hdev
, "Error cancelling transaction: %d\n",
759 if (I2C_SMBUS_WRITE
== read_write
) {
764 if (I2C_SMBUS_BLOCK_DATA
== size
)
767 ret
= cp2112_read(dev
, buf
, read_length
);
770 if (ret
!= read_length
) {
771 hid_warn(hdev
, "short read: %d < %zd\n", ret
, read_length
);
778 case I2C_SMBUS_BYTE_DATA
:
781 case I2C_SMBUS_WORD_DATA
:
782 data
->word
= le16_to_cpup((__le16
*)buf
);
784 case I2C_SMBUS_BLOCK_DATA
:
785 if (read_length
> I2C_SMBUS_BLOCK_MAX
) {
790 memcpy(data
->block
, buf
, read_length
);
796 hid_hw_power(hdev
, PM_HINT_NORMAL
);
797 hid_dbg(hdev
, "transfer finished: %d\n", ret
);
801 static u32
cp2112_functionality(struct i2c_adapter
*adap
)
803 return I2C_FUNC_I2C
|
804 I2C_FUNC_SMBUS_BYTE
|
805 I2C_FUNC_SMBUS_BYTE_DATA
|
806 I2C_FUNC_SMBUS_WORD_DATA
|
807 I2C_FUNC_SMBUS_BLOCK_DATA
|
808 I2C_FUNC_SMBUS_I2C_BLOCK
|
809 I2C_FUNC_SMBUS_PROC_CALL
|
810 I2C_FUNC_SMBUS_BLOCK_PROC_CALL
;
813 static const struct i2c_algorithm smbus_algorithm
= {
814 .master_xfer
= cp2112_i2c_xfer
,
815 .smbus_xfer
= cp2112_xfer
,
816 .functionality
= cp2112_functionality
,
819 static int cp2112_get_usb_config(struct hid_device
*hdev
,
820 struct cp2112_usb_config_report
*cfg
)
824 ret
= cp2112_hid_get(hdev
, CP2112_USB_CONFIG
, (u8
*)cfg
, sizeof(*cfg
),
826 if (ret
!= sizeof(*cfg
)) {
827 hid_err(hdev
, "error reading usb config: %d\n", ret
);
836 static int cp2112_set_usb_config(struct hid_device
*hdev
,
837 struct cp2112_usb_config_report
*cfg
)
841 BUG_ON(cfg
->report
!= CP2112_USB_CONFIG
);
843 ret
= cp2112_hid_output(hdev
, (u8
*)cfg
, sizeof(*cfg
),
845 if (ret
!= sizeof(*cfg
)) {
846 hid_err(hdev
, "error writing usb config: %d\n", ret
);
855 static void chmod_sysfs_attrs(struct hid_device
*hdev
);
857 #define CP2112_CONFIG_ATTR(name, store, format, ...) \
858 static ssize_t name##_store(struct device *kdev, \
859 struct device_attribute *attr, const char *buf, \
862 struct hid_device *hdev = to_hid_device(kdev); \
863 struct cp2112_usb_config_report cfg; \
864 int ret = cp2112_get_usb_config(hdev, &cfg); \
868 ret = cp2112_set_usb_config(hdev, &cfg); \
871 chmod_sysfs_attrs(hdev); \
874 static ssize_t name##_show(struct device *kdev, \
875 struct device_attribute *attr, char *buf) \
877 struct hid_device *hdev = to_hid_device(kdev); \
878 struct cp2112_usb_config_report cfg; \
879 int ret = cp2112_get_usb_config(hdev, &cfg); \
882 return scnprintf(buf, PAGE_SIZE, format, ##__VA_ARGS__); \
884 static DEVICE_ATTR_RW(name);
886 CP2112_CONFIG_ATTR(vendor_id
, ({
889 if (sscanf(buf
, "%hi", &vid
) != 1)
892 cfg
.vid
= cpu_to_le16(vid
);
894 }), "0x%04x\n", le16_to_cpu(cfg
.vid
));
896 CP2112_CONFIG_ATTR(product_id
, ({
899 if (sscanf(buf
, "%hi", &pid
) != 1)
902 cfg
.pid
= cpu_to_le16(pid
);
904 }), "0x%04x\n", le16_to_cpu(cfg
.pid
));
906 CP2112_CONFIG_ATTR(max_power
, ({
909 if (sscanf(buf
, "%i", &mA
) != 1)
912 cfg
.max_power
= (mA
+ 1) / 2;
914 }), "%u mA\n", cfg
.max_power
* 2);
916 CP2112_CONFIG_ATTR(power_mode
, ({
917 if (sscanf(buf
, "%hhi", &cfg
.power_mode
) != 1)
921 }), "%u\n", cfg
.power_mode
);
923 CP2112_CONFIG_ATTR(release_version
, ({
924 if (sscanf(buf
, "%hhi.%hhi", &cfg
.release_major
, &cfg
.release_minor
)
929 }), "%u.%u\n", cfg
.release_major
, cfg
.release_minor
);
931 #undef CP2112_CONFIG_ATTR
933 struct cp2112_pstring_attribute
{
934 struct device_attribute attr
;
935 unsigned char report
;
938 static ssize_t
pstr_store(struct device
*kdev
,
939 struct device_attribute
*kattr
, const char *buf
,
942 struct hid_device
*hdev
= to_hid_device(kdev
);
943 struct cp2112_pstring_attribute
*attr
=
944 container_of(kattr
, struct cp2112_pstring_attribute
, attr
);
945 struct cp2112_string_report report
;
948 memset(&report
, 0, sizeof(report
));
950 ret
= utf8s_to_utf16s(buf
, count
, UTF16_LITTLE_ENDIAN
,
951 report
.string
, ARRAY_SIZE(report
.string
));
952 report
.report
= attr
->report
;
953 report
.length
= ret
* sizeof(report
.string
[0]) + 2;
954 report
.type
= USB_DT_STRING
;
956 ret
= cp2112_hid_output(hdev
, &report
.report
, report
.length
+ 1,
958 if (ret
!= report
.length
+ 1) {
959 hid_err(hdev
, "error writing %s string: %d\n", kattr
->attr
.name
,
966 chmod_sysfs_attrs(hdev
);
970 static ssize_t
pstr_show(struct device
*kdev
,
971 struct device_attribute
*kattr
, char *buf
)
973 struct hid_device
*hdev
= to_hid_device(kdev
);
974 struct cp2112_pstring_attribute
*attr
=
975 container_of(kattr
, struct cp2112_pstring_attribute
, attr
);
976 struct cp2112_string_report report
;
980 ret
= cp2112_hid_get(hdev
, attr
->report
, &report
.report
,
981 sizeof(report
) - 1, HID_FEATURE_REPORT
);
983 hid_err(hdev
, "error reading %s string: %d\n", kattr
->attr
.name
,
990 if (report
.length
< 2) {
991 hid_err(hdev
, "invalid %s string length: %d\n",
992 kattr
->attr
.name
, report
.length
);
996 length
= report
.length
> ret
- 1 ? ret
- 1 : report
.length
;
997 length
= (length
- 2) / sizeof(report
.string
[0]);
998 ret
= utf16s_to_utf8s(report
.string
, length
, UTF16_LITTLE_ENDIAN
, buf
,
1004 #define CP2112_PSTR_ATTR(name, _report) \
1005 static struct cp2112_pstring_attribute dev_attr_##name = { \
1006 .attr = __ATTR(name, (S_IWUSR | S_IRUGO), pstr_show, pstr_store), \
1007 .report = _report, \
1010 CP2112_PSTR_ATTR(manufacturer
, CP2112_MANUFACTURER_STRING
);
1011 CP2112_PSTR_ATTR(product
, CP2112_PRODUCT_STRING
);
1012 CP2112_PSTR_ATTR(serial
, CP2112_SERIAL_STRING
);
1014 #undef CP2112_PSTR_ATTR
1016 static const struct attribute_group cp2112_attr_group
= {
1017 .attrs
= (struct attribute
*[]){
1018 &dev_attr_vendor_id
.attr
,
1019 &dev_attr_product_id
.attr
,
1020 &dev_attr_max_power
.attr
,
1021 &dev_attr_power_mode
.attr
,
1022 &dev_attr_release_version
.attr
,
1023 &dev_attr_manufacturer
.attr
.attr
,
1024 &dev_attr_product
.attr
.attr
,
1025 &dev_attr_serial
.attr
.attr
,
1030 /* Chmoding our sysfs attributes is simply a way to expose which fields in the
1031 * PROM have already been programmed. We do not depend on this preventing
1032 * writing to these attributes since the CP2112 will simply ignore writes to
1033 * already-programmed fields. This is why there is no sense in fixing this
1036 static void chmod_sysfs_attrs(struct hid_device
*hdev
)
1038 struct attribute
**attr
;
1042 ret
= cp2112_hid_get(hdev
, CP2112_LOCK_BYTE
, buf
, sizeof(buf
),
1043 HID_FEATURE_REPORT
);
1044 if (ret
!= sizeof(buf
)) {
1045 hid_err(hdev
, "error reading lock byte: %d\n", ret
);
1049 for (attr
= cp2112_attr_group
.attrs
; *attr
; ++attr
) {
1050 umode_t mode
= (buf
[1] & 1) ? S_IWUSR
| S_IRUGO
: S_IRUGO
;
1051 ret
= sysfs_chmod_file(&hdev
->dev
.kobj
, *attr
, mode
);
1053 hid_err(hdev
, "error chmoding sysfs file %s\n",
1059 static void cp2112_gpio_irq_ack(struct irq_data
*d
)
1063 static void cp2112_gpio_irq_mask(struct irq_data
*d
)
1065 struct gpio_chip
*gc
= irq_data_get_irq_chip_data(d
);
1066 struct cp2112_device
*dev
= gpiochip_get_data(gc
);
1068 __clear_bit(d
->hwirq
, &dev
->irq_mask
);
1071 static void cp2112_gpio_irq_unmask(struct irq_data
*d
)
1073 struct gpio_chip
*gc
= irq_data_get_irq_chip_data(d
);
1074 struct cp2112_device
*dev
= gpiochip_get_data(gc
);
1076 __set_bit(d
->hwirq
, &dev
->irq_mask
);
1079 static void cp2112_gpio_poll_callback(struct work_struct
*work
)
1081 struct cp2112_device
*dev
= container_of(work
, struct cp2112_device
,
1082 gpio_poll_worker
.work
);
1085 u8 virqs
= (u8
)dev
->irq_mask
;
1089 ret
= cp2112_gpio_get_all(&dev
->gc
);
1090 if (ret
== -ENODEV
) /* the hardware has been disconnected */
1098 virq
= ffs(virqs
) - 1;
1099 virqs
&= ~BIT(virq
);
1101 if (!dev
->gc
.to_irq
)
1104 irq
= dev
->gc
.to_irq(&dev
->gc
, virq
);
1106 d
= irq_get_irq_data(irq
);
1110 irq_type
= irqd_get_trigger_type(d
);
1112 if (gpio_mask
& BIT(virq
)) {
1115 if (irq_type
& IRQ_TYPE_LEVEL_HIGH
)
1116 handle_nested_irq(irq
);
1118 if ((irq_type
& IRQ_TYPE_EDGE_RISING
) &&
1119 !(dev
->gpio_prev_state
& BIT(virq
)))
1120 handle_nested_irq(irq
);
1124 if (irq_type
& IRQ_TYPE_LEVEL_LOW
)
1125 handle_nested_irq(irq
);
1127 if ((irq_type
& IRQ_TYPE_EDGE_FALLING
) &&
1128 (dev
->gpio_prev_state
& BIT(virq
)))
1129 handle_nested_irq(irq
);
1133 dev
->gpio_prev_state
= gpio_mask
;
1137 schedule_delayed_work(&dev
->gpio_poll_worker
, 10);
1141 static unsigned int cp2112_gpio_irq_startup(struct irq_data
*d
)
1143 struct gpio_chip
*gc
= irq_data_get_irq_chip_data(d
);
1144 struct cp2112_device
*dev
= gpiochip_get_data(gc
);
1146 INIT_DELAYED_WORK(&dev
->gpio_poll_worker
, cp2112_gpio_poll_callback
);
1148 cp2112_gpio_direction_input(gc
, d
->hwirq
);
1150 if (!dev
->gpio_poll
) {
1151 dev
->gpio_poll
= true;
1152 schedule_delayed_work(&dev
->gpio_poll_worker
, 0);
1155 cp2112_gpio_irq_unmask(d
);
1159 static void cp2112_gpio_irq_shutdown(struct irq_data
*d
)
1161 struct gpio_chip
*gc
= irq_data_get_irq_chip_data(d
);
1162 struct cp2112_device
*dev
= gpiochip_get_data(gc
);
1164 cancel_delayed_work_sync(&dev
->gpio_poll_worker
);
1167 static int cp2112_gpio_irq_type(struct irq_data
*d
, unsigned int type
)
1172 static struct irq_chip cp2112_gpio_irqchip
= {
1173 .name
= "cp2112-gpio",
1174 .irq_startup
= cp2112_gpio_irq_startup
,
1175 .irq_shutdown
= cp2112_gpio_irq_shutdown
,
1176 .irq_ack
= cp2112_gpio_irq_ack
,
1177 .irq_mask
= cp2112_gpio_irq_mask
,
1178 .irq_unmask
= cp2112_gpio_irq_unmask
,
1179 .irq_set_type
= cp2112_gpio_irq_type
,
1182 static int __maybe_unused
cp2112_allocate_irq(struct cp2112_device
*dev
,
1190 dev
->desc
[pin
] = gpiochip_request_own_desc(&dev
->gc
, pin
,
1192 if (IS_ERR(dev
->desc
[pin
])) {
1193 dev_err(dev
->gc
.parent
, "Failed to request GPIO\n");
1194 return PTR_ERR(dev
->desc
[pin
]);
1197 ret
= gpiochip_lock_as_irq(&dev
->gc
, pin
);
1199 dev_err(dev
->gc
.parent
, "Failed to lock GPIO as interrupt\n");
1203 ret
= gpiod_to_irq(dev
->desc
[pin
]);
1205 dev_err(dev
->gc
.parent
, "Failed to translate GPIO to IRQ\n");
1212 gpiochip_unlock_as_irq(&dev
->gc
, pin
);
1214 gpiochip_free_own_desc(dev
->desc
[pin
]);
1215 dev
->desc
[pin
] = NULL
;
1219 static int cp2112_probe(struct hid_device
*hdev
, const struct hid_device_id
*id
)
1221 struct cp2112_device
*dev
;
1223 struct cp2112_smbus_config_report config
;
1226 dev
= devm_kzalloc(&hdev
->dev
, sizeof(*dev
), GFP_KERNEL
);
1230 dev
->in_out_buffer
= devm_kzalloc(&hdev
->dev
, CP2112_REPORT_MAX_LENGTH
,
1232 if (!dev
->in_out_buffer
)
1235 mutex_init(&dev
->lock
);
1237 ret
= hid_parse(hdev
);
1239 hid_err(hdev
, "parse failed\n");
1243 ret
= hid_hw_start(hdev
, HID_CONNECT_HIDRAW
);
1245 hid_err(hdev
, "hw start failed\n");
1249 ret
= hid_hw_open(hdev
);
1251 hid_err(hdev
, "hw open failed\n");
1255 ret
= hid_hw_power(hdev
, PM_HINT_FULLON
);
1257 hid_err(hdev
, "power management error: %d\n", ret
);
1261 ret
= cp2112_hid_get(hdev
, CP2112_GET_VERSION_INFO
, buf
, sizeof(buf
),
1262 HID_FEATURE_REPORT
);
1263 if (ret
!= sizeof(buf
)) {
1264 hid_err(hdev
, "error requesting version\n");
1267 goto err_power_normal
;
1270 hid_info(hdev
, "Part Number: 0x%02X Device Version: 0x%02X\n",
1273 ret
= cp2112_hid_get(hdev
, CP2112_SMBUS_CONFIG
, (u8
*)&config
,
1274 sizeof(config
), HID_FEATURE_REPORT
);
1275 if (ret
!= sizeof(config
)) {
1276 hid_err(hdev
, "error requesting SMBus config\n");
1279 goto err_power_normal
;
1282 config
.retry_time
= cpu_to_be16(1);
1284 ret
= cp2112_hid_output(hdev
, (u8
*)&config
, sizeof(config
),
1285 HID_FEATURE_REPORT
);
1286 if (ret
!= sizeof(config
)) {
1287 hid_err(hdev
, "error setting SMBus config\n");
1290 goto err_power_normal
;
1293 hid_set_drvdata(hdev
, (void *)dev
);
1295 dev
->adap
.owner
= THIS_MODULE
;
1296 dev
->adap
.class = I2C_CLASS_HWMON
;
1297 dev
->adap
.algo
= &smbus_algorithm
;
1298 dev
->adap
.algo_data
= dev
;
1299 dev
->adap
.dev
.parent
= &hdev
->dev
;
1300 snprintf(dev
->adap
.name
, sizeof(dev
->adap
.name
),
1301 "CP2112 SMBus Bridge on hidraw%d",
1302 ((struct hidraw
*)hdev
->hidraw
)->minor
);
1303 dev
->hwversion
= buf
[2];
1304 init_waitqueue_head(&dev
->wait
);
1306 hid_device_io_start(hdev
);
1307 ret
= i2c_add_adapter(&dev
->adap
);
1308 hid_device_io_stop(hdev
);
1311 hid_err(hdev
, "error registering i2c adapter\n");
1312 goto err_power_normal
;
1315 hid_dbg(hdev
, "adapter registered\n");
1317 dev
->gc
.label
= "cp2112_gpio";
1318 dev
->gc
.direction_input
= cp2112_gpio_direction_input
;
1319 dev
->gc
.direction_output
= cp2112_gpio_direction_output
;
1320 dev
->gc
.set
= cp2112_gpio_set
;
1321 dev
->gc
.get
= cp2112_gpio_get
;
1324 dev
->gc
.can_sleep
= 1;
1325 dev
->gc
.parent
= &hdev
->dev
;
1327 ret
= gpiochip_add_data(&dev
->gc
, dev
);
1329 hid_err(hdev
, "error registering gpio chip\n");
1333 ret
= sysfs_create_group(&hdev
->dev
.kobj
, &cp2112_attr_group
);
1335 hid_err(hdev
, "error creating sysfs attrs\n");
1336 goto err_gpiochip_remove
;
1339 chmod_sysfs_attrs(hdev
);
1340 hid_hw_power(hdev
, PM_HINT_NORMAL
);
1342 ret
= gpiochip_irqchip_add(&dev
->gc
, &cp2112_gpio_irqchip
, 0,
1343 handle_simple_irq
, IRQ_TYPE_NONE
);
1345 dev_err(dev
->gc
.parent
, "failed to add IRQ chip\n");
1346 goto err_sysfs_remove
;
1352 sysfs_remove_group(&hdev
->dev
.kobj
, &cp2112_attr_group
);
1353 err_gpiochip_remove
:
1354 gpiochip_remove(&dev
->gc
);
1356 i2c_del_adapter(&dev
->adap
);
1358 hid_hw_power(hdev
, PM_HINT_NORMAL
);
1366 static void cp2112_remove(struct hid_device
*hdev
)
1368 struct cp2112_device
*dev
= hid_get_drvdata(hdev
);
1371 sysfs_remove_group(&hdev
->dev
.kobj
, &cp2112_attr_group
);
1372 i2c_del_adapter(&dev
->adap
);
1374 if (dev
->gpio_poll
) {
1375 dev
->gpio_poll
= false;
1376 cancel_delayed_work_sync(&dev
->gpio_poll_worker
);
1379 for (i
= 0; i
< ARRAY_SIZE(dev
->desc
); i
++) {
1380 gpiochip_unlock_as_irq(&dev
->gc
, i
);
1381 gpiochip_free_own_desc(dev
->desc
[i
]);
1384 gpiochip_remove(&dev
->gc
);
1385 /* i2c_del_adapter has finished removing all i2c devices from our
1386 * adapter. Well behaved devices should no longer call our cp2112_xfer
1387 * and should have waited for any pending calls to finish. It has also
1388 * waited for device_unregister(&adap->dev) to complete. Therefore we
1389 * can safely free our struct cp2112_device.
1395 static int cp2112_raw_event(struct hid_device
*hdev
, struct hid_report
*report
,
1398 struct cp2112_device
*dev
= hid_get_drvdata(hdev
);
1399 struct cp2112_xfer_status_report
*xfer
= (void *)data
;
1402 case CP2112_TRANSFER_STATUS_RESPONSE
:
1403 hid_dbg(hdev
, "xfer status: %02x %02x %04x %04x\n",
1404 xfer
->status0
, xfer
->status1
,
1405 be16_to_cpu(xfer
->retries
), be16_to_cpu(xfer
->length
));
1407 switch (xfer
->status0
) {
1409 dev
->xfer_status
= -EAGAIN
;
1412 dev
->xfer_status
= -EBUSY
;
1414 case STATUS0_COMPLETE
:
1415 dev
->xfer_status
= be16_to_cpu(xfer
->length
);
1418 switch (xfer
->status1
) {
1419 case STATUS1_TIMEOUT_NACK
:
1420 case STATUS1_TIMEOUT_BUS
:
1421 dev
->xfer_status
= -ETIMEDOUT
;
1424 dev
->xfer_status
= -EIO
;
1429 dev
->xfer_status
= -EINVAL
;
1433 atomic_set(&dev
->xfer_avail
, 1);
1435 case CP2112_DATA_READ_RESPONSE
:
1436 hid_dbg(hdev
, "read response: %02x %02x\n", data
[1], data
[2]);
1438 dev
->read_length
= data
[2];
1439 if (dev
->read_length
> sizeof(dev
->read_data
))
1440 dev
->read_length
= sizeof(dev
->read_data
);
1442 memcpy(dev
->read_data
, &data
[3], dev
->read_length
);
1443 atomic_set(&dev
->read_avail
, 1);
1446 hid_err(hdev
, "unknown report\n");
1451 wake_up_interruptible(&dev
->wait
);
1455 static struct hid_driver cp2112_driver
= {
1457 .id_table
= cp2112_devices
,
1458 .probe
= cp2112_probe
,
1459 .remove
= cp2112_remove
,
1460 .raw_event
= cp2112_raw_event
,
1463 module_hid_driver(cp2112_driver
);
1464 MODULE_DESCRIPTION("Silicon Labs HID USB to SMBus master bridge");
1465 MODULE_AUTHOR("David Barksdale <dbarksdale@uplogix.com>");
1466 MODULE_LICENSE("GPL");