2 * USB USBVISION Video device driver 0.9.10
6 * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
8 * This module is part of usbvision driver project.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 * Let's call the version 0.... until compression decoding is completely
27 * This driver is written by Jose Ignacio Gijon and Joerg Heckenbach.
28 * It was based on USB CPiA driver written by Peter Pregler,
29 * Scott J. Bertin and Johannes Erdfelt
30 * Ideas are taken from bttv driver by Ralph Metzler, Marcus Metzler &
31 * Gerd Knorr and zoran 36120/36125 driver by Pauline Middelink
32 * Updates to driver completed by Dwaine P. Garden
36 * - use submit_urb for all setup packets
37 * - Fix memory settings for nt1004. It is 4 times as big as the
39 * - Add audio on endpoint 3 for nt1004 chip.
40 * Seems impossible, needs a codec interface. Which one?
41 * - Clean up the driver.
42 * - optimization for performance.
43 * - Add Videotext capability (VBI). Working on it.....
44 * - Check audio for other devices
48 #include <linux/kernel.h>
49 #include <linux/list.h>
50 #include <linux/timer.h>
51 #include <linux/slab.h>
53 #include <linux/highmem.h>
54 #include <linux/vmalloc.h>
55 #include <linux/module.h>
56 #include <linux/init.h>
57 #include <linux/spinlock.h>
59 #include <linux/videodev2.h>
60 #include <linux/i2c.h>
62 #include <media/saa7115.h>
63 #include <media/v4l2-common.h>
64 #include <media/v4l2-ioctl.h>
65 #include <media/tuner.h>
67 #include <linux/workqueue.h>
69 #include "usbvision.h"
70 #include "usbvision-cards.h"
72 #define DRIVER_AUTHOR \
73 "Joerg Heckenbach <joerg@heckenbach-aw.de>, " \
74 "Dwaine Garden <DwaineGarden@rogers.com>"
75 #define DRIVER_NAME "usbvision"
76 #define DRIVER_ALIAS "USBVision"
77 #define DRIVER_DESC "USBVision USB Video Device Driver for Linux"
78 #define DRIVER_LICENSE "GPL"
79 #define USBVISION_VERSION_STRING "0.9.11"
81 #define ENABLE_HEXDUMP 0 /* Enable if you need it */
84 #ifdef USBVISION_DEBUG
85 #define PDEBUG(level, fmt, args...) { \
86 if (video_debug & (level)) \
87 printk(KERN_INFO KBUILD_MODNAME ":[%s:%d] " fmt, \
88 __func__, __LINE__ , ## args); \
91 #define PDEBUG(level, fmt, args...) do {} while (0)
94 #define DBG_IO (1 << 1)
95 #define DBG_PROBE (1 << 2)
96 #define DBG_MMAP (1 << 3)
98 /* String operations */
99 #define rmspace(str) while (*str == ' ') str++;
100 #define goto2next(str) while (*str != ' ') str++; while (*str == ' ') str++;
103 /* sequential number of usbvision device */
104 static int usbvision_nr
;
106 static struct usbvision_v4l2_format_st usbvision_v4l2_format
[] = {
107 { 1, 1, 8, V4L2_PIX_FMT_GREY
, "GREY" },
108 { 1, 2, 16, V4L2_PIX_FMT_RGB565
, "RGB565" },
109 { 1, 3, 24, V4L2_PIX_FMT_RGB24
, "RGB24" },
110 { 1, 4, 32, V4L2_PIX_FMT_RGB32
, "RGB32" },
111 { 1, 2, 16, V4L2_PIX_FMT_RGB555
, "RGB555" },
112 { 1, 2, 16, V4L2_PIX_FMT_YUYV
, "YUV422" },
113 { 1, 2, 12, V4L2_PIX_FMT_YVU420
, "YUV420P" }, /* 1.5 ! */
114 { 1, 2, 16, V4L2_PIX_FMT_YUV422P
, "YUV422P" }
117 /* Function prototypes */
118 static void usbvision_release(struct usb_usbvision
*usbvision
);
120 /* Default initialization of device driver parameters */
121 /* Set the default format for ISOC endpoint */
122 static int isoc_mode
= ISOC_MODE_COMPRESS
;
123 /* Set the default Debug Mode of the device driver */
124 static int video_debug
;
125 /* Set the default device to power on at startup */
126 static int power_on_at_open
= 1;
127 /* Sequential Number of Video Device */
128 static int video_nr
= -1;
129 /* Sequential Number of Radio Device */
130 static int radio_nr
= -1;
132 /* Grab parameters for the device driver */
134 /* Showing parameters under SYSFS */
135 module_param(isoc_mode
, int, 0444);
136 module_param(video_debug
, int, 0444);
137 module_param(power_on_at_open
, int, 0444);
138 module_param(video_nr
, int, 0444);
139 module_param(radio_nr
, int, 0444);
141 MODULE_PARM_DESC(isoc_mode
, " Set the default format for ISOC endpoint. Default: 0x60 (Compression On)");
142 MODULE_PARM_DESC(video_debug
, " Set the default Debug Mode of the device driver. Default: 0 (Off)");
143 MODULE_PARM_DESC(power_on_at_open
, " Set the default device to power on when device is opened. Default: 1 (On)");
144 MODULE_PARM_DESC(video_nr
, "Set video device number (/dev/videoX). Default: -1 (autodetect)");
145 MODULE_PARM_DESC(radio_nr
, "Set radio device number (/dev/radioX). Default: -1 (autodetect)");
149 MODULE_AUTHOR(DRIVER_AUTHOR
);
150 MODULE_DESCRIPTION(DRIVER_DESC
);
151 MODULE_LICENSE(DRIVER_LICENSE
);
152 MODULE_VERSION(USBVISION_VERSION_STRING
);
153 MODULE_ALIAS(DRIVER_ALIAS
);
156 /*****************************************************************************/
157 /* SYSFS Code - Copied from the stv680.c usb module. */
158 /* Device information is located at /sys/class/video4linux/video0 */
159 /* Device parameters information is located at /sys/module/usbvision */
160 /* Device USB Information is located at */
161 /* /sys/bus/usb/drivers/USBVision Video Grabber */
162 /*****************************************************************************/
164 #define YES_NO(x) ((x) ? "Yes" : "No")
166 static inline struct usb_usbvision
*cd_to_usbvision(struct device
*cd
)
168 struct video_device
*vdev
=
169 container_of(cd
, struct video_device
, dev
);
170 return video_get_drvdata(vdev
);
173 static ssize_t
show_version(struct device
*cd
,
174 struct device_attribute
*attr
, char *buf
)
176 return sprintf(buf
, "%s\n", USBVISION_VERSION_STRING
);
178 static DEVICE_ATTR(version
, S_IRUGO
, show_version
, NULL
);
180 static ssize_t
show_model(struct device
*cd
,
181 struct device_attribute
*attr
, char *buf
)
183 struct video_device
*vdev
=
184 container_of(cd
, struct video_device
, dev
);
185 struct usb_usbvision
*usbvision
= video_get_drvdata(vdev
);
186 return sprintf(buf
, "%s\n",
187 usbvision_device_data
[usbvision
->dev_model
].model_string
);
189 static DEVICE_ATTR(model
, S_IRUGO
, show_model
, NULL
);
191 static ssize_t
show_hue(struct device
*cd
,
192 struct device_attribute
*attr
, char *buf
)
194 struct video_device
*vdev
=
195 container_of(cd
, struct video_device
, dev
);
196 struct usb_usbvision
*usbvision
= video_get_drvdata(vdev
);
197 struct v4l2_control ctrl
;
198 ctrl
.id
= V4L2_CID_HUE
;
201 call_all(usbvision
, core
, g_ctrl
, &ctrl
);
202 return sprintf(buf
, "%d\n", ctrl
.value
);
204 static DEVICE_ATTR(hue
, S_IRUGO
, show_hue
, NULL
);
206 static ssize_t
show_contrast(struct device
*cd
,
207 struct device_attribute
*attr
, char *buf
)
209 struct video_device
*vdev
=
210 container_of(cd
, struct video_device
, dev
);
211 struct usb_usbvision
*usbvision
= video_get_drvdata(vdev
);
212 struct v4l2_control ctrl
;
213 ctrl
.id
= V4L2_CID_CONTRAST
;
216 call_all(usbvision
, core
, g_ctrl
, &ctrl
);
217 return sprintf(buf
, "%d\n", ctrl
.value
);
219 static DEVICE_ATTR(contrast
, S_IRUGO
, show_contrast
, NULL
);
221 static ssize_t
show_brightness(struct device
*cd
,
222 struct device_attribute
*attr
, char *buf
)
224 struct video_device
*vdev
=
225 container_of(cd
, struct video_device
, dev
);
226 struct usb_usbvision
*usbvision
= video_get_drvdata(vdev
);
227 struct v4l2_control ctrl
;
228 ctrl
.id
= V4L2_CID_BRIGHTNESS
;
231 call_all(usbvision
, core
, g_ctrl
, &ctrl
);
232 return sprintf(buf
, "%d\n", ctrl
.value
);
234 static DEVICE_ATTR(brightness
, S_IRUGO
, show_brightness
, NULL
);
236 static ssize_t
show_saturation(struct device
*cd
,
237 struct device_attribute
*attr
, char *buf
)
239 struct video_device
*vdev
=
240 container_of(cd
, struct video_device
, dev
);
241 struct usb_usbvision
*usbvision
= video_get_drvdata(vdev
);
242 struct v4l2_control ctrl
;
243 ctrl
.id
= V4L2_CID_SATURATION
;
246 call_all(usbvision
, core
, g_ctrl
, &ctrl
);
247 return sprintf(buf
, "%d\n", ctrl
.value
);
249 static DEVICE_ATTR(saturation
, S_IRUGO
, show_saturation
, NULL
);
251 static ssize_t
show_streaming(struct device
*cd
,
252 struct device_attribute
*attr
, char *buf
)
254 struct video_device
*vdev
=
255 container_of(cd
, struct video_device
, dev
);
256 struct usb_usbvision
*usbvision
= video_get_drvdata(vdev
);
257 return sprintf(buf
, "%s\n",
258 YES_NO(usbvision
->streaming
== stream_on
? 1 : 0));
260 static DEVICE_ATTR(streaming
, S_IRUGO
, show_streaming
, NULL
);
262 static ssize_t
show_compression(struct device
*cd
,
263 struct device_attribute
*attr
, char *buf
)
265 struct video_device
*vdev
=
266 container_of(cd
, struct video_device
, dev
);
267 struct usb_usbvision
*usbvision
= video_get_drvdata(vdev
);
268 return sprintf(buf
, "%s\n",
269 YES_NO(usbvision
->isoc_mode
== ISOC_MODE_COMPRESS
));
271 static DEVICE_ATTR(compression
, S_IRUGO
, show_compression
, NULL
);
273 static ssize_t
show_device_bridge(struct device
*cd
,
274 struct device_attribute
*attr
, char *buf
)
276 struct video_device
*vdev
=
277 container_of(cd
, struct video_device
, dev
);
278 struct usb_usbvision
*usbvision
= video_get_drvdata(vdev
);
279 return sprintf(buf
, "%d\n", usbvision
->bridge_type
);
281 static DEVICE_ATTR(bridge
, S_IRUGO
, show_device_bridge
, NULL
);
283 static void usbvision_create_sysfs(struct video_device
*vdev
)
290 res
= device_create_file(&vdev
->dev
, &dev_attr_version
);
293 res
= device_create_file(&vdev
->dev
, &dev_attr_model
);
296 res
= device_create_file(&vdev
->dev
, &dev_attr_hue
);
299 res
= device_create_file(&vdev
->dev
, &dev_attr_contrast
);
302 res
= device_create_file(&vdev
->dev
, &dev_attr_brightness
);
305 res
= device_create_file(&vdev
->dev
, &dev_attr_saturation
);
308 res
= device_create_file(&vdev
->dev
, &dev_attr_streaming
);
311 res
= device_create_file(&vdev
->dev
, &dev_attr_compression
);
314 res
= device_create_file(&vdev
->dev
, &dev_attr_bridge
);
319 dev_err(&vdev
->dev
, "%s error: %d\n", __func__
, res
);
322 static void usbvision_remove_sysfs(struct video_device
*vdev
)
325 device_remove_file(&vdev
->dev
, &dev_attr_version
);
326 device_remove_file(&vdev
->dev
, &dev_attr_model
);
327 device_remove_file(&vdev
->dev
, &dev_attr_hue
);
328 device_remove_file(&vdev
->dev
, &dev_attr_contrast
);
329 device_remove_file(&vdev
->dev
, &dev_attr_brightness
);
330 device_remove_file(&vdev
->dev
, &dev_attr_saturation
);
331 device_remove_file(&vdev
->dev
, &dev_attr_streaming
);
332 device_remove_file(&vdev
->dev
, &dev_attr_compression
);
333 device_remove_file(&vdev
->dev
, &dev_attr_bridge
);
340 * This is part of Video 4 Linux API. The driver can be opened by one
341 * client only (checks internal counter 'usbvision->user'). The procedure
342 * then allocates buffers needed for video processing.
345 static int usbvision_v4l2_open(struct file
*file
)
347 struct usb_usbvision
*usbvision
= video_drvdata(file
);
350 PDEBUG(DBG_IO
, "open");
352 if (mutex_lock_interruptible(&usbvision
->v4l2_lock
))
354 usbvision_reset_power_off_timer(usbvision
);
359 /* Allocate memory for the scratch ring buffer */
360 err_code
= usbvision_scratch_alloc(usbvision
);
361 if (isoc_mode
== ISOC_MODE_COMPRESS
) {
362 /* Allocate intermediate decompression buffers
364 err_code
= usbvision_decompress_alloc(usbvision
);
367 /* Deallocate all buffers if trouble */
368 usbvision_scratch_free(usbvision
);
369 usbvision_decompress_free(usbvision
);
373 /* If so far no errors then we shall start the camera */
375 if (usbvision
->power
== 0) {
376 usbvision_power_on(usbvision
);
377 usbvision_i2c_register(usbvision
);
380 /* Send init sequence only once, it's large! */
381 if (!usbvision
->initialized
) {
383 setup_ok
= usbvision_setup(usbvision
, isoc_mode
);
385 usbvision
->initialized
= 1;
391 usbvision_begin_streaming(usbvision
);
392 err_code
= usbvision_init_isoc(usbvision
);
393 /* device must be initialized before isoc transfer */
394 usbvision_muxsel(usbvision
, 0);
397 if (power_on_at_open
) {
398 usbvision_i2c_unregister(usbvision
);
399 usbvision_power_off(usbvision
);
400 usbvision
->initialized
= 0;
406 usbvision_empty_framequeues(usbvision
);
407 mutex_unlock(&usbvision
->v4l2_lock
);
409 PDEBUG(DBG_IO
, "success");
414 * usbvision_v4l2_close()
416 * This is part of Video 4 Linux API. The procedure
417 * stops streaming and deallocates all buffers that were earlier
418 * allocated in usbvision_v4l2_open().
421 static int usbvision_v4l2_close(struct file
*file
)
423 struct usb_usbvision
*usbvision
= video_drvdata(file
);
425 PDEBUG(DBG_IO
, "close");
427 mutex_lock(&usbvision
->v4l2_lock
);
428 usbvision_audio_off(usbvision
);
429 usbvision_restart_isoc(usbvision
);
430 usbvision_stop_isoc(usbvision
);
432 usbvision_decompress_free(usbvision
);
433 usbvision_frames_free(usbvision
);
434 usbvision_empty_framequeues(usbvision
);
435 usbvision_scratch_free(usbvision
);
439 if (power_on_at_open
) {
440 /* power off in a little while
441 to avoid off/on every close/open short sequences */
442 usbvision_set_power_off_timer(usbvision
);
443 usbvision
->initialized
= 0;
446 if (usbvision
->remove_pending
) {
447 printk(KERN_INFO
"%s: Final disconnect\n", __func__
);
448 usbvision_release(usbvision
);
450 mutex_unlock(&usbvision
->v4l2_lock
);
452 PDEBUG(DBG_IO
, "success");
460 * This is part of Video 4 Linux API. The procedure handles ioctl() calls.
463 #ifdef CONFIG_VIDEO_ADV_DEBUG
464 static int vidioc_g_register(struct file
*file
, void *priv
,
465 struct v4l2_dbg_register
*reg
)
467 struct usb_usbvision
*usbvision
= video_drvdata(file
);
470 /* NT100x has a 8-bit register space */
471 err_code
= usbvision_read_reg(usbvision
, reg
->reg
&0xff);
473 dev_err(&usbvision
->vdev
->dev
,
474 "%s: VIDIOC_DBG_G_REGISTER failed: error %d\n",
483 static int vidioc_s_register(struct file
*file
, void *priv
,
484 const struct v4l2_dbg_register
*reg
)
486 struct usb_usbvision
*usbvision
= video_drvdata(file
);
489 /* NT100x has a 8-bit register space */
490 err_code
= usbvision_write_reg(usbvision
, reg
->reg
& 0xff, reg
->val
);
492 dev_err(&usbvision
->vdev
->dev
,
493 "%s: VIDIOC_DBG_S_REGISTER failed: error %d\n",
501 static int vidioc_querycap(struct file
*file
, void *priv
,
502 struct v4l2_capability
*vc
)
504 struct usb_usbvision
*usbvision
= video_drvdata(file
);
506 strlcpy(vc
->driver
, "USBVision", sizeof(vc
->driver
));
508 usbvision_device_data
[usbvision
->dev_model
].model_string
,
510 usb_make_path(usbvision
->dev
, vc
->bus_info
, sizeof(vc
->bus_info
));
511 vc
->capabilities
= V4L2_CAP_VIDEO_CAPTURE
|
515 (usbvision
->have_tuner
? V4L2_CAP_TUNER
: 0);
519 static int vidioc_enum_input(struct file
*file
, void *priv
,
520 struct v4l2_input
*vi
)
522 struct usb_usbvision
*usbvision
= video_drvdata(file
);
525 if (vi
->index
>= usbvision
->video_inputs
)
527 if (usbvision
->have_tuner
)
530 chan
= vi
->index
+ 1; /* skip Television string*/
532 /* Determine the requested input characteristics
533 specific for each usbvision card model */
536 if (usbvision_device_data
[usbvision
->dev_model
].video_channels
== 4) {
537 strcpy(vi
->name
, "White Video Input");
539 strcpy(vi
->name
, "Television");
540 vi
->type
= V4L2_INPUT_TYPE_TUNER
;
543 vi
->std
= USBVISION_NORMS
;
547 vi
->type
= V4L2_INPUT_TYPE_CAMERA
;
548 if (usbvision_device_data
[usbvision
->dev_model
].video_channels
== 4)
549 strcpy(vi
->name
, "Green Video Input");
551 strcpy(vi
->name
, "Composite Video Input");
552 vi
->std
= V4L2_STD_PAL
;
555 vi
->type
= V4L2_INPUT_TYPE_CAMERA
;
556 if (usbvision_device_data
[usbvision
->dev_model
].video_channels
== 4)
557 strcpy(vi
->name
, "Yellow Video Input");
559 strcpy(vi
->name
, "S-Video Input");
560 vi
->std
= V4L2_STD_PAL
;
563 vi
->type
= V4L2_INPUT_TYPE_CAMERA
;
564 strcpy(vi
->name
, "Red Video Input");
565 vi
->std
= V4L2_STD_PAL
;
571 static int vidioc_g_input(struct file
*file
, void *priv
, unsigned int *input
)
573 struct usb_usbvision
*usbvision
= video_drvdata(file
);
575 *input
= usbvision
->ctl_input
;
579 static int vidioc_s_input(struct file
*file
, void *priv
, unsigned int input
)
581 struct usb_usbvision
*usbvision
= video_drvdata(file
);
583 if (input
>= usbvision
->video_inputs
)
586 usbvision_muxsel(usbvision
, input
);
587 usbvision_set_input(usbvision
);
588 usbvision_set_output(usbvision
,
590 usbvision
->curheight
);
594 static int vidioc_s_std(struct file
*file
, void *priv
, v4l2_std_id id
)
596 struct usb_usbvision
*usbvision
= video_drvdata(file
);
598 usbvision
->tvnorm_id
= id
;
600 call_all(usbvision
, video
, s_std
, usbvision
->tvnorm_id
);
601 /* propagate the change to the decoder */
602 usbvision_muxsel(usbvision
, usbvision
->ctl_input
);
607 static int vidioc_g_std(struct file
*file
, void *priv
, v4l2_std_id
*id
)
609 struct usb_usbvision
*usbvision
= video_drvdata(file
);
611 *id
= usbvision
->tvnorm_id
;
615 static int vidioc_g_tuner(struct file
*file
, void *priv
,
616 struct v4l2_tuner
*vt
)
618 struct usb_usbvision
*usbvision
= video_drvdata(file
);
620 if (!usbvision
->have_tuner
|| vt
->index
) /* Only tuner 0 */
622 if (usbvision
->radio
) {
623 strcpy(vt
->name
, "Radio");
624 vt
->type
= V4L2_TUNER_RADIO
;
626 strcpy(vt
->name
, "Television");
628 /* Let clients fill in the remainder of this struct */
629 call_all(usbvision
, tuner
, g_tuner
, vt
);
634 static int vidioc_s_tuner(struct file
*file
, void *priv
,
635 const struct v4l2_tuner
*vt
)
637 struct usb_usbvision
*usbvision
= video_drvdata(file
);
639 /* Only no or one tuner for now */
640 if (!usbvision
->have_tuner
|| vt
->index
)
642 /* let clients handle this */
643 call_all(usbvision
, tuner
, s_tuner
, vt
);
648 static int vidioc_g_frequency(struct file
*file
, void *priv
,
649 struct v4l2_frequency
*freq
)
651 struct usb_usbvision
*usbvision
= video_drvdata(file
);
653 freq
->tuner
= 0; /* Only one tuner */
654 if (usbvision
->radio
)
655 freq
->type
= V4L2_TUNER_RADIO
;
657 freq
->type
= V4L2_TUNER_ANALOG_TV
;
658 freq
->frequency
= usbvision
->freq
;
663 static int vidioc_s_frequency(struct file
*file
, void *priv
,
664 const struct v4l2_frequency
*freq
)
666 struct usb_usbvision
*usbvision
= video_drvdata(file
);
668 /* Only no or one tuner for now */
669 if (!usbvision
->have_tuner
|| freq
->tuner
)
672 usbvision
->freq
= freq
->frequency
;
673 call_all(usbvision
, tuner
, s_frequency
, freq
);
678 static int vidioc_g_audio(struct file
*file
, void *priv
, struct v4l2_audio
*a
)
680 struct usb_usbvision
*usbvision
= video_drvdata(file
);
682 if (usbvision
->radio
)
683 strcpy(a
->name
, "Radio");
685 strcpy(a
->name
, "TV");
690 static int vidioc_s_audio(struct file
*file
, void *fh
,
691 const struct v4l2_audio
*a
)
698 static int vidioc_queryctrl(struct file
*file
, void *priv
,
699 struct v4l2_queryctrl
*ctrl
)
701 struct usb_usbvision
*usbvision
= video_drvdata(file
);
703 call_all(usbvision
, core
, queryctrl
, ctrl
);
711 static int vidioc_g_ctrl(struct file
*file
, void *priv
,
712 struct v4l2_control
*ctrl
)
714 struct usb_usbvision
*usbvision
= video_drvdata(file
);
716 call_all(usbvision
, core
, g_ctrl
, ctrl
);
720 static int vidioc_s_ctrl(struct file
*file
, void *priv
,
721 struct v4l2_control
*ctrl
)
723 struct usb_usbvision
*usbvision
= video_drvdata(file
);
725 call_all(usbvision
, core
, s_ctrl
, ctrl
);
729 static int vidioc_reqbufs(struct file
*file
,
730 void *priv
, struct v4l2_requestbuffers
*vr
)
732 struct usb_usbvision
*usbvision
= video_drvdata(file
);
735 RESTRICT_TO_RANGE(vr
->count
, 1, USBVISION_NUMFRAMES
);
737 /* Check input validity:
738 the user must do a VIDEO CAPTURE and MMAP method. */
739 if (vr
->memory
!= V4L2_MEMORY_MMAP
)
742 if (usbvision
->streaming
== stream_on
) {
743 ret
= usbvision_stream_interrupt(usbvision
);
748 usbvision_frames_free(usbvision
);
749 usbvision_empty_framequeues(usbvision
);
750 vr
->count
= usbvision_frames_alloc(usbvision
, vr
->count
);
752 usbvision
->cur_frame
= NULL
;
757 static int vidioc_querybuf(struct file
*file
,
758 void *priv
, struct v4l2_buffer
*vb
)
760 struct usb_usbvision
*usbvision
= video_drvdata(file
);
761 struct usbvision_frame
*frame
;
763 /* FIXME : must control
764 that buffers are mapped (VIDIOC_REQBUFS has been called) */
765 if (vb
->index
>= usbvision
->num_frames
)
767 /* Updating the corresponding frame state */
768 vb
->flags
= V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
;
769 frame
= &usbvision
->frame
[vb
->index
];
770 if (frame
->grabstate
>= frame_state_ready
)
771 vb
->flags
|= V4L2_BUF_FLAG_QUEUED
;
772 if (frame
->grabstate
>= frame_state_done
)
773 vb
->flags
|= V4L2_BUF_FLAG_DONE
;
774 if (frame
->grabstate
== frame_state_unused
)
775 vb
->flags
|= V4L2_BUF_FLAG_MAPPED
;
776 vb
->memory
= V4L2_MEMORY_MMAP
;
778 vb
->m
.offset
= vb
->index
* PAGE_ALIGN(usbvision
->max_frame_size
);
780 vb
->memory
= V4L2_MEMORY_MMAP
;
781 vb
->field
= V4L2_FIELD_NONE
;
782 vb
->length
= usbvision
->curwidth
*
783 usbvision
->curheight
*
784 usbvision
->palette
.bytes_per_pixel
;
785 vb
->timestamp
= usbvision
->frame
[vb
->index
].timestamp
;
786 vb
->sequence
= usbvision
->frame
[vb
->index
].sequence
;
790 static int vidioc_qbuf(struct file
*file
, void *priv
, struct v4l2_buffer
*vb
)
792 struct usb_usbvision
*usbvision
= video_drvdata(file
);
793 struct usbvision_frame
*frame
;
794 unsigned long lock_flags
;
796 /* FIXME : works only on VIDEO_CAPTURE MODE, MMAP. */
797 if (vb
->index
>= usbvision
->num_frames
)
800 frame
= &usbvision
->frame
[vb
->index
];
802 if (frame
->grabstate
!= frame_state_unused
)
805 /* Mark it as ready and enqueue frame */
806 frame
->grabstate
= frame_state_ready
;
807 frame
->scanstate
= scan_state_scanning
;
808 frame
->scanlength
= 0; /* Accumulated in usbvision_parse_data() */
810 vb
->flags
&= ~V4L2_BUF_FLAG_DONE
;
812 /* set v4l2_format index */
813 frame
->v4l2_format
= usbvision
->palette
;
815 spin_lock_irqsave(&usbvision
->queue_lock
, lock_flags
);
816 list_add_tail(&usbvision
->frame
[vb
->index
].frame
, &usbvision
->inqueue
);
817 spin_unlock_irqrestore(&usbvision
->queue_lock
, lock_flags
);
822 static int vidioc_dqbuf(struct file
*file
, void *priv
, struct v4l2_buffer
*vb
)
824 struct usb_usbvision
*usbvision
= video_drvdata(file
);
826 struct usbvision_frame
*f
;
827 unsigned long lock_flags
;
829 if (list_empty(&(usbvision
->outqueue
))) {
830 if (usbvision
->streaming
== stream_idle
)
832 ret
= wait_event_interruptible
833 (usbvision
->wait_frame
,
834 !list_empty(&(usbvision
->outqueue
)));
839 spin_lock_irqsave(&usbvision
->queue_lock
, lock_flags
);
840 f
= list_entry(usbvision
->outqueue
.next
,
841 struct usbvision_frame
, frame
);
842 list_del(usbvision
->outqueue
.next
);
843 spin_unlock_irqrestore(&usbvision
->queue_lock
, lock_flags
);
845 f
->grabstate
= frame_state_unused
;
847 vb
->memory
= V4L2_MEMORY_MMAP
;
848 vb
->flags
= V4L2_BUF_FLAG_MAPPED
|
849 V4L2_BUF_FLAG_QUEUED
|
851 V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC
;
852 vb
->index
= f
->index
;
853 vb
->sequence
= f
->sequence
;
854 vb
->timestamp
= f
->timestamp
;
855 vb
->field
= V4L2_FIELD_NONE
;
856 vb
->bytesused
= f
->scanlength
;
861 static int vidioc_streamon(struct file
*file
, void *priv
, enum v4l2_buf_type i
)
863 struct usb_usbvision
*usbvision
= video_drvdata(file
);
865 usbvision
->streaming
= stream_on
;
866 call_all(usbvision
, video
, s_stream
, 1);
871 static int vidioc_streamoff(struct file
*file
,
872 void *priv
, enum v4l2_buf_type type
)
874 struct usb_usbvision
*usbvision
= video_drvdata(file
);
876 if (type
!= V4L2_BUF_TYPE_VIDEO_CAPTURE
)
879 if (usbvision
->streaming
== stream_on
) {
880 usbvision_stream_interrupt(usbvision
);
881 /* Stop all video streamings */
882 call_all(usbvision
, video
, s_stream
, 0);
884 usbvision_empty_framequeues(usbvision
);
889 static int vidioc_enum_fmt_vid_cap(struct file
*file
, void *priv
,
890 struct v4l2_fmtdesc
*vfd
)
892 if (vfd
->index
>= USBVISION_SUPPORTED_PALETTES
- 1)
894 strcpy(vfd
->description
, usbvision_v4l2_format
[vfd
->index
].desc
);
895 vfd
->pixelformat
= usbvision_v4l2_format
[vfd
->index
].format
;
899 static int vidioc_g_fmt_vid_cap(struct file
*file
, void *priv
,
900 struct v4l2_format
*vf
)
902 struct usb_usbvision
*usbvision
= video_drvdata(file
);
903 vf
->fmt
.pix
.width
= usbvision
->curwidth
;
904 vf
->fmt
.pix
.height
= usbvision
->curheight
;
905 vf
->fmt
.pix
.pixelformat
= usbvision
->palette
.format
;
906 vf
->fmt
.pix
.bytesperline
=
907 usbvision
->curwidth
* usbvision
->palette
.bytes_per_pixel
;
908 vf
->fmt
.pix
.sizeimage
= vf
->fmt
.pix
.bytesperline
* usbvision
->curheight
;
909 vf
->fmt
.pix
.colorspace
= V4L2_COLORSPACE_SMPTE170M
;
910 vf
->fmt
.pix
.field
= V4L2_FIELD_NONE
; /* Always progressive image */
915 static int vidioc_try_fmt_vid_cap(struct file
*file
, void *priv
,
916 struct v4l2_format
*vf
)
918 struct usb_usbvision
*usbvision
= video_drvdata(file
);
921 /* Find requested format in available ones */
922 for (format_idx
= 0; format_idx
< USBVISION_SUPPORTED_PALETTES
; format_idx
++) {
923 if (vf
->fmt
.pix
.pixelformat
==
924 usbvision_v4l2_format
[format_idx
].format
) {
925 usbvision
->palette
= usbvision_v4l2_format
[format_idx
];
930 if (format_idx
== USBVISION_SUPPORTED_PALETTES
)
932 RESTRICT_TO_RANGE(vf
->fmt
.pix
.width
, MIN_FRAME_WIDTH
, MAX_FRAME_WIDTH
);
933 RESTRICT_TO_RANGE(vf
->fmt
.pix
.height
, MIN_FRAME_HEIGHT
, MAX_FRAME_HEIGHT
);
935 vf
->fmt
.pix
.bytesperline
= vf
->fmt
.pix
.width
*
936 usbvision
->palette
.bytes_per_pixel
;
937 vf
->fmt
.pix
.sizeimage
= vf
->fmt
.pix
.bytesperline
*vf
->fmt
.pix
.height
;
942 static int vidioc_s_fmt_vid_cap(struct file
*file
, void *priv
,
943 struct v4l2_format
*vf
)
945 struct usb_usbvision
*usbvision
= video_drvdata(file
);
948 ret
= vidioc_try_fmt_vid_cap(file
, priv
, vf
);
952 /* stop io in case it is already in progress */
953 if (usbvision
->streaming
== stream_on
) {
954 ret
= usbvision_stream_interrupt(usbvision
);
958 usbvision_frames_free(usbvision
);
959 usbvision_empty_framequeues(usbvision
);
961 usbvision
->cur_frame
= NULL
;
963 /* by now we are committed to the new data... */
964 usbvision_set_output(usbvision
, vf
->fmt
.pix
.width
, vf
->fmt
.pix
.height
);
969 static ssize_t
usbvision_read(struct file
*file
, char __user
*buf
,
970 size_t count
, loff_t
*ppos
)
972 struct usb_usbvision
*usbvision
= video_drvdata(file
);
973 int noblock
= file
->f_flags
& O_NONBLOCK
;
974 unsigned long lock_flags
;
976 struct usbvision_frame
*frame
;
978 PDEBUG(DBG_IO
, "%s: %ld bytes, noblock=%d", __func__
,
979 (unsigned long)count
, noblock
);
981 if (!USBVISION_IS_OPERATIONAL(usbvision
) || (buf
== NULL
))
984 /* This entry point is compatible with the mmap routines
985 so that a user can do either VIDIOC_QBUF/VIDIOC_DQBUF
986 to get frames or call read on the device. */
987 if (!usbvision
->num_frames
) {
988 /* First, allocate some frames to work with
989 if this has not been done with VIDIOC_REQBUF */
990 usbvision_frames_free(usbvision
);
991 usbvision_empty_framequeues(usbvision
);
992 usbvision_frames_alloc(usbvision
, USBVISION_NUMFRAMES
);
995 if (usbvision
->streaming
!= stream_on
) {
996 /* no stream is running, make it running ! */
997 usbvision
->streaming
= stream_on
;
998 call_all(usbvision
, video
, s_stream
, 1);
1001 /* Then, enqueue as many frames as possible
1002 (like a user of VIDIOC_QBUF would do) */
1003 for (i
= 0; i
< usbvision
->num_frames
; i
++) {
1004 frame
= &usbvision
->frame
[i
];
1005 if (frame
->grabstate
== frame_state_unused
) {
1006 /* Mark it as ready and enqueue frame */
1007 frame
->grabstate
= frame_state_ready
;
1008 frame
->scanstate
= scan_state_scanning
;
1009 /* Accumulated in usbvision_parse_data() */
1010 frame
->scanlength
= 0;
1012 /* set v4l2_format index */
1013 frame
->v4l2_format
= usbvision
->palette
;
1015 spin_lock_irqsave(&usbvision
->queue_lock
, lock_flags
);
1016 list_add_tail(&frame
->frame
, &usbvision
->inqueue
);
1017 spin_unlock_irqrestore(&usbvision
->queue_lock
,
1022 /* Then try to steal a frame (like a VIDIOC_DQBUF would do) */
1023 if (list_empty(&(usbvision
->outqueue
))) {
1027 ret
= wait_event_interruptible
1028 (usbvision
->wait_frame
,
1029 !list_empty(&(usbvision
->outqueue
)));
1034 spin_lock_irqsave(&usbvision
->queue_lock
, lock_flags
);
1035 frame
= list_entry(usbvision
->outqueue
.next
,
1036 struct usbvision_frame
, frame
);
1037 list_del(usbvision
->outqueue
.next
);
1038 spin_unlock_irqrestore(&usbvision
->queue_lock
, lock_flags
);
1040 /* An error returns an empty frame */
1041 if (frame
->grabstate
== frame_state_error
) {
1042 frame
->bytes_read
= 0;
1046 PDEBUG(DBG_IO
, "%s: frmx=%d, bytes_read=%ld, scanlength=%ld",
1048 frame
->index
, frame
->bytes_read
, frame
->scanlength
);
1050 /* copy bytes to user space; we allow for partials reads */
1051 if ((count
+ frame
->bytes_read
) > (unsigned long)frame
->scanlength
)
1052 count
= frame
->scanlength
- frame
->bytes_read
;
1054 if (copy_to_user(buf
, frame
->data
+ frame
->bytes_read
, count
))
1057 frame
->bytes_read
+= count
;
1058 PDEBUG(DBG_IO
, "%s: {copy} count used=%ld, new bytes_read=%ld",
1060 (unsigned long)count
, frame
->bytes_read
);
1062 /* For now, forget the frame if it has not been read in one shot. */
1063 /* if (frame->bytes_read >= frame->scanlength) {*/ /* All data has been read */
1064 frame
->bytes_read
= 0;
1066 /* Mark it as available to be used again. */
1067 frame
->grabstate
= frame_state_unused
;
1073 static ssize_t
usbvision_v4l2_read(struct file
*file
, char __user
*buf
,
1074 size_t count
, loff_t
*ppos
)
1076 struct usb_usbvision
*usbvision
= video_drvdata(file
);
1079 if (mutex_lock_interruptible(&usbvision
->v4l2_lock
))
1080 return -ERESTARTSYS
;
1081 res
= usbvision_read(file
, buf
, count
, ppos
);
1082 mutex_unlock(&usbvision
->v4l2_lock
);
1086 static int usbvision_mmap(struct file
*file
, struct vm_area_struct
*vma
)
1088 unsigned long size
= vma
->vm_end
- vma
->vm_start
,
1089 start
= vma
->vm_start
;
1092 struct usb_usbvision
*usbvision
= video_drvdata(file
);
1094 PDEBUG(DBG_MMAP
, "mmap");
1096 if (!USBVISION_IS_OPERATIONAL(usbvision
))
1099 if (!(vma
->vm_flags
& VM_WRITE
) ||
1100 size
!= PAGE_ALIGN(usbvision
->max_frame_size
)) {
1104 for (i
= 0; i
< usbvision
->num_frames
; i
++) {
1105 if (((PAGE_ALIGN(usbvision
->max_frame_size
)*i
) >> PAGE_SHIFT
) ==
1109 if (i
== usbvision
->num_frames
) {
1111 "mmap: user supplied mapping address is out of range");
1115 /* VM_IO is eventually going to replace PageReserved altogether */
1116 vma
->vm_flags
|= VM_IO
| VM_DONTEXPAND
| VM_DONTDUMP
;
1118 pos
= usbvision
->frame
[i
].data
;
1120 if (vm_insert_page(vma
, start
, vmalloc_to_page(pos
))) {
1121 PDEBUG(DBG_MMAP
, "mmap: vm_insert_page failed");
1132 static int usbvision_v4l2_mmap(struct file
*file
, struct vm_area_struct
*vma
)
1134 struct usb_usbvision
*usbvision
= video_drvdata(file
);
1137 if (mutex_lock_interruptible(&usbvision
->v4l2_lock
))
1138 return -ERESTARTSYS
;
1139 res
= usbvision_mmap(file
, vma
);
1140 mutex_unlock(&usbvision
->v4l2_lock
);
1145 * Here comes the stuff for radio on usbvision based devices
1148 static int usbvision_radio_open(struct file
*file
)
1150 struct usb_usbvision
*usbvision
= video_drvdata(file
);
1153 PDEBUG(DBG_IO
, "%s:", __func__
);
1155 if (mutex_lock_interruptible(&usbvision
->v4l2_lock
))
1156 return -ERESTARTSYS
;
1157 if (usbvision
->user
) {
1158 dev_err(&usbvision
->rdev
->dev
,
1159 "%s: Someone tried to open an already opened USBVision Radio!\n",
1163 if (power_on_at_open
) {
1164 usbvision_reset_power_off_timer(usbvision
);
1165 if (usbvision
->power
== 0) {
1166 usbvision_power_on(usbvision
);
1167 usbvision_i2c_register(usbvision
);
1171 /* Alternate interface 1 is is the biggest frame size */
1172 err_code
= usbvision_set_alternate(usbvision
);
1174 usbvision
->last_error
= err_code
;
1179 /* If so far no errors then we shall start the radio */
1180 usbvision
->radio
= 1;
1181 call_all(usbvision
, tuner
, s_radio
);
1182 usbvision_set_audio(usbvision
, USBVISION_AUDIO_RADIO
);
1187 if (power_on_at_open
) {
1188 usbvision_i2c_unregister(usbvision
);
1189 usbvision_power_off(usbvision
);
1190 usbvision
->initialized
= 0;
1194 mutex_unlock(&usbvision
->v4l2_lock
);
1199 static int usbvision_radio_close(struct file
*file
)
1201 struct usb_usbvision
*usbvision
= video_drvdata(file
);
1206 mutex_lock(&usbvision
->v4l2_lock
);
1207 /* Set packet size to 0 */
1208 usbvision
->iface_alt
= 0;
1209 err_code
= usb_set_interface(usbvision
->dev
, usbvision
->iface
,
1210 usbvision
->iface_alt
);
1212 usbvision_audio_off(usbvision
);
1213 usbvision
->radio
= 0;
1216 if (power_on_at_open
) {
1217 usbvision_set_power_off_timer(usbvision
);
1218 usbvision
->initialized
= 0;
1221 if (usbvision
->remove_pending
) {
1222 printk(KERN_INFO
"%s: Final disconnect\n", __func__
);
1223 usbvision_release(usbvision
);
1226 mutex_unlock(&usbvision
->v4l2_lock
);
1227 PDEBUG(DBG_IO
, "success");
1231 /* Video registration stuff */
1233 /* Video template */
1234 static const struct v4l2_file_operations usbvision_fops
= {
1235 .owner
= THIS_MODULE
,
1236 .open
= usbvision_v4l2_open
,
1237 .release
= usbvision_v4l2_close
,
1238 .read
= usbvision_v4l2_read
,
1239 .mmap
= usbvision_v4l2_mmap
,
1240 .unlocked_ioctl
= video_ioctl2
,
1241 /* .poll = video_poll, */
1244 static const struct v4l2_ioctl_ops usbvision_ioctl_ops
= {
1245 .vidioc_querycap
= vidioc_querycap
,
1246 .vidioc_enum_fmt_vid_cap
= vidioc_enum_fmt_vid_cap
,
1247 .vidioc_g_fmt_vid_cap
= vidioc_g_fmt_vid_cap
,
1248 .vidioc_try_fmt_vid_cap
= vidioc_try_fmt_vid_cap
,
1249 .vidioc_s_fmt_vid_cap
= vidioc_s_fmt_vid_cap
,
1250 .vidioc_reqbufs
= vidioc_reqbufs
,
1251 .vidioc_querybuf
= vidioc_querybuf
,
1252 .vidioc_qbuf
= vidioc_qbuf
,
1253 .vidioc_dqbuf
= vidioc_dqbuf
,
1254 .vidioc_s_std
= vidioc_s_std
,
1255 .vidioc_g_std
= vidioc_g_std
,
1256 .vidioc_enum_input
= vidioc_enum_input
,
1257 .vidioc_g_input
= vidioc_g_input
,
1258 .vidioc_s_input
= vidioc_s_input
,
1259 .vidioc_queryctrl
= vidioc_queryctrl
,
1260 .vidioc_g_audio
= vidioc_g_audio
,
1261 .vidioc_s_audio
= vidioc_s_audio
,
1262 .vidioc_g_ctrl
= vidioc_g_ctrl
,
1263 .vidioc_s_ctrl
= vidioc_s_ctrl
,
1264 .vidioc_streamon
= vidioc_streamon
,
1265 .vidioc_streamoff
= vidioc_streamoff
,
1266 .vidioc_g_tuner
= vidioc_g_tuner
,
1267 .vidioc_s_tuner
= vidioc_s_tuner
,
1268 .vidioc_g_frequency
= vidioc_g_frequency
,
1269 .vidioc_s_frequency
= vidioc_s_frequency
,
1270 #ifdef CONFIG_VIDEO_ADV_DEBUG
1271 .vidioc_g_register
= vidioc_g_register
,
1272 .vidioc_s_register
= vidioc_s_register
,
1276 static struct video_device usbvision_video_template
= {
1277 .fops
= &usbvision_fops
,
1278 .ioctl_ops
= &usbvision_ioctl_ops
,
1279 .name
= "usbvision-video",
1280 .release
= video_device_release
,
1281 .tvnorms
= USBVISION_NORMS
,
1285 /* Radio template */
1286 static const struct v4l2_file_operations usbvision_radio_fops
= {
1287 .owner
= THIS_MODULE
,
1288 .open
= usbvision_radio_open
,
1289 .release
= usbvision_radio_close
,
1290 .unlocked_ioctl
= video_ioctl2
,
1293 static const struct v4l2_ioctl_ops usbvision_radio_ioctl_ops
= {
1294 .vidioc_querycap
= vidioc_querycap
,
1295 .vidioc_enum_input
= vidioc_enum_input
,
1296 .vidioc_g_input
= vidioc_g_input
,
1297 .vidioc_s_input
= vidioc_s_input
,
1298 .vidioc_queryctrl
= vidioc_queryctrl
,
1299 .vidioc_g_audio
= vidioc_g_audio
,
1300 .vidioc_s_audio
= vidioc_s_audio
,
1301 .vidioc_g_ctrl
= vidioc_g_ctrl
,
1302 .vidioc_s_ctrl
= vidioc_s_ctrl
,
1303 .vidioc_g_tuner
= vidioc_g_tuner
,
1304 .vidioc_s_tuner
= vidioc_s_tuner
,
1305 .vidioc_g_frequency
= vidioc_g_frequency
,
1306 .vidioc_s_frequency
= vidioc_s_frequency
,
1309 static struct video_device usbvision_radio_template
= {
1310 .fops
= &usbvision_radio_fops
,
1311 .name
= "usbvision-radio",
1312 .release
= video_device_release
,
1313 .ioctl_ops
= &usbvision_radio_ioctl_ops
,
1317 static struct video_device
*usbvision_vdev_init(struct usb_usbvision
*usbvision
,
1318 struct video_device
*vdev_template
,
1321 struct usb_device
*usb_dev
= usbvision
->dev
;
1322 struct video_device
*vdev
;
1324 if (usb_dev
== NULL
) {
1325 dev_err(&usbvision
->dev
->dev
,
1326 "%s: usbvision->dev is not set\n", __func__
);
1330 vdev
= video_device_alloc();
1333 *vdev
= *vdev_template
;
1334 vdev
->lock
= &usbvision
->v4l2_lock
;
1335 vdev
->v4l2_dev
= &usbvision
->v4l2_dev
;
1336 snprintf(vdev
->name
, sizeof(vdev
->name
), "%s", name
);
1337 video_set_drvdata(vdev
, usbvision
);
1341 /* unregister video4linux devices */
1342 static void usbvision_unregister_video(struct usb_usbvision
*usbvision
)
1345 if (usbvision
->rdev
) {
1346 PDEBUG(DBG_PROBE
, "unregister %s [v4l2]",
1347 video_device_node_name(usbvision
->rdev
));
1348 if (video_is_registered(usbvision
->rdev
))
1349 video_unregister_device(usbvision
->rdev
);
1351 video_device_release(usbvision
->rdev
);
1352 usbvision
->rdev
= NULL
;
1356 if (usbvision
->vdev
) {
1357 PDEBUG(DBG_PROBE
, "unregister %s [v4l2]",
1358 video_device_node_name(usbvision
->vdev
));
1359 if (video_is_registered(usbvision
->vdev
))
1360 video_unregister_device(usbvision
->vdev
);
1362 video_device_release(usbvision
->vdev
);
1363 usbvision
->vdev
= NULL
;
1367 /* register video4linux devices */
1368 static int usbvision_register_video(struct usb_usbvision
*usbvision
)
1371 usbvision
->vdev
= usbvision_vdev_init(usbvision
,
1372 &usbvision_video_template
,
1374 if (usbvision
->vdev
== NULL
)
1376 if (video_register_device(usbvision
->vdev
, VFL_TYPE_GRABBER
, video_nr
) < 0)
1378 printk(KERN_INFO
"USBVision[%d]: registered USBVision Video device %s [v4l2]\n",
1379 usbvision
->nr
, video_device_node_name(usbvision
->vdev
));
1382 if (usbvision_device_data
[usbvision
->dev_model
].radio
) {
1383 /* usbvision has radio */
1384 usbvision
->rdev
= usbvision_vdev_init(usbvision
,
1385 &usbvision_radio_template
,
1387 if (usbvision
->rdev
== NULL
)
1389 if (video_register_device(usbvision
->rdev
, VFL_TYPE_RADIO
, radio_nr
) < 0)
1391 printk(KERN_INFO
"USBVision[%d]: registered USBVision Radio device %s [v4l2]\n",
1392 usbvision
->nr
, video_device_node_name(usbvision
->rdev
));
1398 dev_err(&usbvision
->dev
->dev
,
1399 "USBVision[%d]: video_register_device() failed\n",
1401 usbvision_unregister_video(usbvision
);
1408 * This code allocates the struct usb_usbvision.
1409 * It is filled with default values.
1411 * Returns NULL on error, a pointer to usb_usbvision else.
1414 static struct usb_usbvision
*usbvision_alloc(struct usb_device
*dev
,
1415 struct usb_interface
*intf
)
1417 struct usb_usbvision
*usbvision
;
1419 usbvision
= kzalloc(sizeof(struct usb_usbvision
), GFP_KERNEL
);
1420 if (usbvision
== NULL
)
1423 usbvision
->dev
= dev
;
1424 if (v4l2_device_register(&intf
->dev
, &usbvision
->v4l2_dev
))
1427 mutex_init(&usbvision
->v4l2_lock
);
1429 /* prepare control urb for control messages during interrupts */
1430 usbvision
->ctrl_urb
= usb_alloc_urb(USBVISION_URB_FRAMES
, GFP_KERNEL
);
1431 if (usbvision
->ctrl_urb
== NULL
)
1433 init_waitqueue_head(&usbvision
->ctrl_urb_wq
);
1435 usbvision_init_power_off_timer(usbvision
);
1440 v4l2_device_unregister(&usbvision
->v4l2_dev
);
1447 * usbvision_release()
1449 * This code does final release of struct usb_usbvision. This happens
1450 * after the device is disconnected -and- all clients closed their files.
1453 static void usbvision_release(struct usb_usbvision
*usbvision
)
1455 PDEBUG(DBG_PROBE
, "");
1457 usbvision_reset_power_off_timer(usbvision
);
1459 usbvision
->initialized
= 0;
1461 usbvision_remove_sysfs(usbvision
->vdev
);
1462 usbvision_unregister_video(usbvision
);
1463 kfree(usbvision
->alt_max_pkt_size
);
1465 usb_free_urb(usbvision
->ctrl_urb
);
1467 v4l2_device_unregister(&usbvision
->v4l2_dev
);
1470 PDEBUG(DBG_PROBE
, "success");
1474 /*********************** usb interface **********************************/
1476 static void usbvision_configure_video(struct usb_usbvision
*usbvision
)
1480 if (usbvision
== NULL
)
1483 model
= usbvision
->dev_model
;
1484 usbvision
->palette
= usbvision_v4l2_format
[2]; /* V4L2_PIX_FMT_RGB24; */
1486 if (usbvision_device_data
[usbvision
->dev_model
].vin_reg2_override
) {
1487 usbvision
->vin_reg2_preset
=
1488 usbvision_device_data
[usbvision
->dev_model
].vin_reg2
;
1490 usbvision
->vin_reg2_preset
= 0;
1493 usbvision
->tvnorm_id
= usbvision_device_data
[model
].video_norm
;
1495 usbvision
->video_inputs
= usbvision_device_data
[model
].video_channels
;
1496 usbvision
->ctl_input
= 0;
1498 /* This should be here to make i2c clients to be able to register */
1499 /* first switch off audio */
1500 if (usbvision_device_data
[model
].audio_channels
> 0)
1501 usbvision_audio_off(usbvision
);
1502 if (!power_on_at_open
) {
1503 /* and then power up the noisy tuner */
1504 usbvision_power_on(usbvision
);
1505 usbvision_i2c_register(usbvision
);
1512 * This procedure queries device descriptor and accepts the interface
1513 * if it looks like USBVISION video device
1516 static int usbvision_probe(struct usb_interface
*intf
,
1517 const struct usb_device_id
*devid
)
1519 struct usb_device
*dev
= usb_get_dev(interface_to_usbdev(intf
));
1520 struct usb_interface
*uif
;
1521 __u8 ifnum
= intf
->altsetting
->desc
.bInterfaceNumber
;
1522 const struct usb_host_interface
*interface
;
1523 struct usb_usbvision
*usbvision
= NULL
;
1524 const struct usb_endpoint_descriptor
*endpoint
;
1527 PDEBUG(DBG_PROBE
, "VID=%#04x, PID=%#04x, ifnum=%u",
1528 dev
->descriptor
.idVendor
,
1529 dev
->descriptor
.idProduct
, ifnum
);
1531 model
= devid
->driver_info
;
1532 if (model
< 0 || model
>= usbvision_device_data_size
) {
1533 PDEBUG(DBG_PROBE
, "model out of bounds %d", model
);
1536 printk(KERN_INFO
"%s: %s found\n", __func__
,
1537 usbvision_device_data
[model
].model_string
);
1539 if (usbvision_device_data
[model
].interface
>= 0)
1540 interface
= &dev
->actconfig
->interface
[usbvision_device_data
[model
].interface
]->altsetting
[0];
1542 interface
= &dev
->actconfig
->interface
[ifnum
]->altsetting
[0];
1543 endpoint
= &interface
->endpoint
[1].desc
;
1544 if (!usb_endpoint_xfer_isoc(endpoint
)) {
1545 dev_err(&intf
->dev
, "%s: interface %d. has non-ISO endpoint!\n",
1547 dev_err(&intf
->dev
, "%s: Endpoint attributes %d",
1548 __func__
, endpoint
->bmAttributes
);
1551 if (usb_endpoint_dir_out(endpoint
)) {
1552 dev_err(&intf
->dev
, "%s: interface %d. has ISO OUT endpoint!\n",
1557 usbvision
= usbvision_alloc(dev
, intf
);
1558 if (usbvision
== NULL
) {
1559 dev_err(&intf
->dev
, "%s: couldn't allocate USBVision struct\n", __func__
);
1563 if (dev
->descriptor
.bNumConfigurations
> 1)
1564 usbvision
->bridge_type
= BRIDGE_NT1004
;
1565 else if (model
== DAZZLE_DVC_90_REV_1_SECAM
)
1566 usbvision
->bridge_type
= BRIDGE_NT1005
;
1568 usbvision
->bridge_type
= BRIDGE_NT1003
;
1569 PDEBUG(DBG_PROBE
, "bridge_type %d", usbvision
->bridge_type
);
1571 /* compute alternate max packet sizes */
1572 uif
= dev
->actconfig
->interface
[0];
1574 usbvision
->num_alt
= uif
->num_altsetting
;
1575 PDEBUG(DBG_PROBE
, "Alternate settings: %i", usbvision
->num_alt
);
1576 usbvision
->alt_max_pkt_size
= kmalloc(32 * usbvision
->num_alt
, GFP_KERNEL
);
1577 if (usbvision
->alt_max_pkt_size
== NULL
) {
1578 dev_err(&intf
->dev
, "usbvision: out of memory!\n");
1579 usbvision_release(usbvision
);
1583 for (i
= 0; i
< usbvision
->num_alt
; i
++) {
1584 u16 tmp
= le16_to_cpu(uif
->altsetting
[i
].endpoint
[1].desc
.
1586 usbvision
->alt_max_pkt_size
[i
] =
1587 (tmp
& 0x07ff) * (((tmp
& 0x1800) >> 11) + 1);
1588 PDEBUG(DBG_PROBE
, "Alternate setting %i, max size= %i", i
,
1589 usbvision
->alt_max_pkt_size
[i
]);
1593 usbvision
->nr
= usbvision_nr
++;
1595 usbvision
->have_tuner
= usbvision_device_data
[model
].tuner
;
1596 if (usbvision
->have_tuner
)
1597 usbvision
->tuner_type
= usbvision_device_data
[model
].tuner_type
;
1599 usbvision
->dev_model
= model
;
1600 usbvision
->remove_pending
= 0;
1601 usbvision
->iface
= ifnum
;
1602 usbvision
->iface_alt
= 0;
1603 usbvision
->video_endp
= endpoint
->bEndpointAddress
;
1604 usbvision
->isoc_packet_size
= 0;
1605 usbvision
->usb_bandwidth
= 0;
1606 usbvision
->user
= 0;
1607 usbvision
->streaming
= stream_off
;
1608 usbvision_configure_video(usbvision
);
1609 usbvision_register_video(usbvision
);
1611 usbvision_create_sysfs(usbvision
->vdev
);
1613 PDEBUG(DBG_PROBE
, "success");
1619 * usbvision_disconnect()
1621 * This procedure stops all driver activity, deallocates interface-private
1622 * structure (pointed by 'ptr') and after that driver should be removable
1623 * with no ill consequences.
1626 static void usbvision_disconnect(struct usb_interface
*intf
)
1628 struct usb_usbvision
*usbvision
= to_usbvision(usb_get_intfdata(intf
));
1630 PDEBUG(DBG_PROBE
, "");
1632 if (usbvision
== NULL
) {
1633 pr_err("%s: usb_get_intfdata() failed\n", __func__
);
1637 mutex_lock(&usbvision
->v4l2_lock
);
1639 /* At this time we ask to cancel outstanding URBs */
1640 usbvision_stop_isoc(usbvision
);
1642 v4l2_device_disconnect(&usbvision
->v4l2_dev
);
1644 if (usbvision
->power
) {
1645 usbvision_i2c_unregister(usbvision
);
1646 usbvision_power_off(usbvision
);
1648 usbvision
->remove_pending
= 1; /* Now all ISO data will be ignored */
1650 usb_put_dev(usbvision
->dev
);
1651 usbvision
->dev
= NULL
; /* USB device is no more */
1653 mutex_unlock(&usbvision
->v4l2_lock
);
1655 if (usbvision
->user
) {
1656 printk(KERN_INFO
"%s: In use, disconnect pending\n",
1658 wake_up_interruptible(&usbvision
->wait_frame
);
1659 wake_up_interruptible(&usbvision
->wait_stream
);
1661 usbvision_release(usbvision
);
1664 PDEBUG(DBG_PROBE
, "success");
1667 static struct usb_driver usbvision_driver
= {
1668 .name
= "usbvision",
1669 .id_table
= usbvision_table
,
1670 .probe
= usbvision_probe
,
1671 .disconnect
= usbvision_disconnect
,
1677 * This code is run to initialize the driver.
1680 static int __init
usbvision_init(void)
1684 PDEBUG(DBG_PROBE
, "");
1686 PDEBUG(DBG_IO
, "IO debugging is enabled [video]");
1687 PDEBUG(DBG_PROBE
, "PROBE debugging is enabled [video]");
1688 PDEBUG(DBG_MMAP
, "MMAP debugging is enabled [video]");
1690 /* disable planar mode support unless compression enabled */
1691 if (isoc_mode
!= ISOC_MODE_COMPRESS
) {
1692 /* FIXME : not the right way to set supported flag */
1693 usbvision_v4l2_format
[6].supported
= 0; /* V4L2_PIX_FMT_YVU420 */
1694 usbvision_v4l2_format
[7].supported
= 0; /* V4L2_PIX_FMT_YUV422P */
1697 err_code
= usb_register(&usbvision_driver
);
1699 if (err_code
== 0) {
1700 printk(KERN_INFO DRIVER_DESC
" : " USBVISION_VERSION_STRING
"\n");
1701 PDEBUG(DBG_PROBE
, "success");
1706 static void __exit
usbvision_exit(void)
1708 PDEBUG(DBG_PROBE
, "");
1710 usb_deregister(&usbvision_driver
);
1711 PDEBUG(DBG_PROBE
, "success");
1714 module_init(usbvision_init
);
1715 module_exit(usbvision_exit
);
1718 * Overrides for Emacs so that we follow Linus's tabbing style.
1719 * ---------------------------------------------------------------------------