| blob | 00ffdf187f0b3e85fc9e61898afd70dcf910915a |
1 Release Date : Thu. Jun 19, 2014 17:00:00 PST 2014 -
2 (emaild-id:megaraidlinux@lsi.com)
3 Adam Radford
4 Kashyap Desai
5 Sumit Saxena
6 Uday Lingala
7 Current Version : 06.803.02.00-rc1
8 Old Version : 06.803.01.00-rc1
9 1. Fix reset_mutex leak in megasas_reset_fusion().
10 2. Remove unused variables in megasas_instance.
11 3. Fix LD/VF affiliation parsing.
12 4. Add missing initial call to megasas_get_ld_vf_affiliation().
13 5. Version and Changelog update.
14 -------------------------------------------------------------------------------
15 Release Date : Mon. Mar 10, 2014 17:00:00 PST 2014 -
16 (emaild-id:megaraidlinux@lsi.com)
17 Adam Radford
18 Kashyap Desai
19 Sumit Saxena
20 Current Version : 06.803.01.00-rc1
21 Old Version : 06.700.06.00-rc1
22 1. Load correct raid context timeout value for multipathing & clustering.
23 2. Fix megasas_ioc_init_fusion to use local stack variable.
24 3. Return leaked MPT frames to MPT command pool.
25 4. Add Dell PowerEdge VRTX SR-IOV VF device support.
26 5. Version and Changelog update.
27 -------------------------------------------------------------------------------
28 Release Date : Sat. Aug 31, 2013 17:00:00 PST 2013 -
29 (emaild-id:megaraidlinux@lsi.com)
30 Adam Radford
31 Kashyap Desai
32 Sumit Saxena
33 Current Version : 06.700.06.00-rc1
34 Old Version : 06.600.18.00-rc1
35 1. Add High Availability clustering support using shared Logical Disks.
36 2. Version and Changelog update.
37 -------------------------------------------------------------------------------
38 Release Date : Wed. May 15, 2013 17:00:00 PST 2013 -
39 (emaild-id:megaraidlinux@lsi.com)
40 Adam Radford
41 Kashyap Desai
42 Sumit Saxena
43 Current Version : 06.600.18.00-rc1
44 Old Version : 06.506.00.00-rc1
45 1. Return DID_ERROR for scsi io, when controller is in critical h/w error.
46 2. Fix the interrupt mask for Gen2 controller.
47 3. Update balance count in driver to be in sync of firmware.
48 4. Free event detail memory without device ID check.
49 5. Set IO request timeout value provided by OS timeout for Tape devices.
50 6. Add support for MegaRAID Fury (device ID-0x005f) 12Gb/s controllers.
51 7. Add support to display Customer branding details in syslog.
52 8. Set IoFlags to enable Fast Path for JBODs for Invader/Fury(12 Gb/s)
53 controllers.
54 9. Add support for Extended MSI-x vectors for Invader and Fury(12Gb/s
55 HBA).
56 10.Add support for Uneven Span PRL11.
57 11.Add support to differentiate between iMR and MR Firmware.
58 12.Version and Changelog update.
59 -------------------------------------------------------------------------------
60 Release Date : Sat. Feb 9, 2013 17:00:00 PST 2013 -
61 (emaild-id:megaraidlinux@lsi.com)
62 Adam Radford
63 Current Version : 06.506.00.00-rc1
64 Old Version : 06.504.01.00-rc1
65 1. Add 4k FastPath DIF support.
66 2. Don't load DevHandle unless FastPath enabled.
67 3. Version and Changelog update.
68 -------------------------------------------------------------------------------
69 Release Date : Mon. Oct 1, 2012 17:00:00 PST 2012 -
70 (emaild-id:megaraidlinux@lsi.com)
71 Adam Radford
72 Current Version : 06.504.01.00-rc1
73 Old Version : 00.00.06.18-rc1
74 1. Removed un-needed completion_lock spinlock calls.
75 2. Add module param for configurable MSI-X vector count.
76 3. Load io_request DataLength in bytes.
77 4. Add array boundary check for SystemPD.
78 5. Add SystemPD FastPath support.
79 6. Remove duplicate code.
80 7. Version, Changelog, Copyright update.
81 -------------------------------------------------------------------------------
82 Release Date : Tue. Jun 17, 2012 17:00:00 PST 2012 -
83 (emaild-id:megaraidlinux@lsi.com)
84 Adam Radford/Kashyap Desai
85 Current Version : 00.00.06.18-rc1
86 Old Version : 00.00.06.15-rc1
87 1. Fix Copyright dates.
88 2. Add throttlequeuedepth module parameter.
89 3. Add resetwaittime module parameter.
90 4. Move poll_aen_lock initializer.
91 -------------------------------------------------------------------------------
92 Release Date : Mon. Mar 19, 2012 17:00:00 PST 2012 -
93 (emaild-id:megaraidlinux@lsi.com)
94 Adam Radford
95 Current Version : 00.00.06.15-rc1
96 Old Version : 00.00.06.14-rc1
97 1. Optimize HostMSIxVectors setting.
98 2. Add fpRead/WriteCapable, fpRead/WriteAcrossStripe checks.
99 -------------------------------------------------------------------------------
100 Release Date : Fri. Jan 6, 2012 17:00:00 PST 2010 -
101 (emaild-id:megaraidlinux@lsi.com)
102 Adam Radford
103 Current Version : 00.00.06.14-rc1
104 Old Version : 00.00.06.12-rc1
105 1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380.
106 2. Mask off flags in ioctl path to prevent memory scribble with older
107 MegaCLI versions.
108 3. Remove poll_mode_io module parameter, sysfs node, and associated code.
109 -------------------------------------------------------------------------------
110 Release Date : Wed. Oct 5, 2011 17:00:00 PST 2010 -
111 (emaild-id:megaraidlinux@lsi.com)
112 Adam Radford
113 Current Version : 00.00.06.12-rc1
114 Old Version : 00.00.05.40-rc1
115 1. Continue booting immediately if FW in FAULT at driver load time.
116 2. Increase default cmds per lun to 256.
117 3. Fix mismatch in megasas_reset_fusion() mutex lock-unlock.
118 4. Remove some un-necessary code.
119 5. Clear state change interrupts for Fusion/Invader.
120 6. Clear FUSION_IN_RESET before enabling interrupts.
121 7. Add support for MegaRAID 9360/9380 12GB/s controllers.
122 8. Add multiple MSI-X vector/multiple reply queue support.
123 9. Add driver workaround for PERC5/1068 kdump kernel panic.
124 -------------------------------------------------------------------------------
125 Release Date : Tue. Jul 26, 2011 17:00:00 PST 2010 -
126 (emaild-id:megaraidlinux@lsi.com)
127 Adam Radford
128 Current Version : 00.00.05.40-rc1
129 Old Version : 00.00.05.38-rc1
130 1. Fix FastPath I/O to work with degraded RAID 1.
131 2. Add .change_queue_depth support.
132 -------------------------------------------------------------------------------
133 Release Date : Wed. May 11, 2011 17:00:00 PST 2010 -
134 (emaild-id:megaraidlinux@lsi.com)
135 Adam Radford
136 Current Version : 00.00.05.38-rc1
137 Old Version : 00.00.05.34-rc1
138 1. Remove MSI-X black list, use MFI_REG_STATE.ready.msiEnable.
139 2. Remove un-used function megasas_return_cmd_for_smid().
140 3. Check MFI_REG_STATE.fault.resetAdapter in megasas_reset_fusion().
141 4. Disable interrupts/free_irq() in megasas_shutdown().
142 5. Fix bug where AENs could be lost in probe() and resume().
143 6. Convert 6,10,12 byte CDB's to 16 byte CDB for large LBA's for FastPath
144 IO.
145 7. Add 1078 OCR support.
146 -------------------------------------------------------------------------------
147 Release Date : Thu. Feb 24, 2011 17:00:00 PST 2010 -
148 (emaild-id:megaraidlinux@lsi.com)
149 Adam Radford
150 Current Version : 00.00.05.34-rc1
151 Old Version : 00.00.05.29-rc1
152 1. Fix some failure gotos from megasas_probe_one(), etc.
153 2. Add missing check_and_restore_queue_depth() call in
154 complete_cmd_fusion().
155 3. Enable MSI-X before calling megasas_init_fw().
156 4. Call tasklet_schedule() even if outbound_intr_status == 0 for MFI based
157 boards in MSI-X mode.
158 5. Fix megasas_probe_one() to clear PCI_MSIX_FLAGS_ENABLE in msi control
159 register in kdump kernel.
160 6. Fix megasas_get_cmd() to only print "Command pool empty" if
161 megasas_dbg_lvl is set.
162 7. Fix megasas_build_dcdb_fusion() to not filter by TYPE_DISK.
163 8. Fix megasas_build_dcdb_fusion() to use io_request->LUN[1] field.
164 9. Add MR_EVT_CFG_CLEARED to megasas_aen_polling().
165 10. Fix tasklet_init() in megasas_init_fw() to use instancet->tasklet.
166 11. Fix fault state handling in megasas_transition_to_ready().
167 12. Fix max_sectors setting for IEEE SGL's.
168 13. Fix iMR OCR support to work correctly.
169 -------------------------------------------------------------------------------
170 Release Date : Tues. Dec 14, 2010 17:00:00 PST 2010 -
171 (emaild-id:megaraidlinux@lsi.com)
172 Adam Radford
173 Current Version : 00.00.05.29-rc1
174 Old Version : 00.00.04.31-rc1
175 1. Rename megaraid_sas.c to megaraid_sas_base.c.
176 2. Update GPL headers.
177 3. Add MSI-X support and 'msix_disable' module parameter.
178 4. Use lowest memory bar (for SR-IOV VF support).
179 5. Add struct megasas_instance_temlate changes, and change all code to use
180 new instance entries:
182 irqreturn_t (*service_isr )(int irq, void *devp);
183 void (*tasklet)(unsigned long);
184 u32 (*init_adapter)(struct megasas_instance *);
185 u32 (*build_and_issue_cmd) (struct megasas_instance *,
186 struct scsi_cmnd *);
187 void (*issue_dcmd) (struct megasas_instance *instance,
188 struct megasas_cmd *cmd);
190 6. Add code to support MegaRAID 9265/9285 controllers device id (0x5b).
191 -------------------------------------------------------------------------------
192 1 Release Date : Thur. May 03, 2010 09:12:45 PST 2009 -
193 (emaild-id:megaraidlinux@lsi.com)
194 Bo Yang
196 2 Current Version : 00.00.04.31-rc1
197 3 Older Version : 00.00.04.17.1-rc1
199 1. Add the Online Controller Reset (OCR) to the Driver.
200 OCR is the new feature for megaraid_sas driver which
201 will allow the fw to do the chip reset which will not
202 affect the OS behavior.
204 To add the OCR support, driver need to do:
205 a). reset the controller chips -- Xscale and Gen2 which
206 will change the function calls and add the reset function
207 related to this two chips.
209 b). during the reset, driver will store the pending cmds
210 which not returned by FW to driver's pending queue. Driver
211 will re-issue those pending cmds again to FW after the OCR
212 finished.
214 c). In driver's timeout routine, driver will report to
215 OS as reset. Also driver's queue routine will block the
216 cmds until the OCR finished.
218 d). in Driver's ISR routine, if driver get the FW state as
219 state change, FW in Failure status and FW support online controller
220 reset (OCR), driver will start to do the controller reset.
222 e). In driver's IOCTL routine, the application cmds will wait for the
223 OCR to finish, then issue the cmds to FW.
225 f). Before driver kill adapter, driver will do last chance of
226 OCR to see if driver can bring back the FW.
228 2. Add the support update flag to the driver to tell LSI megaraid_sas
229 application which driver will support the device update. So application
230 will not need to do the device update after application add/del the device
231 from the system.
232 3. In driver's timeout routine, driver will do three time reset if fw is in
233 failed state. Driver will kill adapter if can't bring back FW after the
234 this three times reset.
235 4. Add the input parameter max_sectors to 1MB support to our GEN2 controller.
236 customer can use the input parameter max_sectors to add 1MB support to GEN2
237 controller.
239 1 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 -
240 (emaild-id:megaraidlinux@lsi.com)
241 Bo Yang
243 2 Current Version : 00.00.04.17.1-rc1
244 3 Older Version : 00.00.04.12
246 1. Add the pad_0 in mfi frame structure to 0 to fix the
247 context value larger than 32bit value issue.
249 2. Add the logic drive list to the driver. Driver will
250 keep the logic drive list internal after driver load.
252 3. driver fixed the device update issue after get the AEN
253 PD delete/ADD, LD add/delete from FW.
255 1 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 -
256 (emaild-id:megaraidlinux@lsi.com)
257 Bo Yang
259 2 Current Version : 00.00.04.12
260 3 Older Version : 00.00.04.10
262 1. Change the AEN sys PD update from scsi_scan to
263 scsi_add_device and scsi_remove_device.
264 2. Takeoff the debug print-out in aen_polling routine.
266 1 Release Date : Thur. July 02, 2009 10:12:45 PST 2009 -
267 (emaild-id:megaraidlinux@lsi.com)
268 Bo Yang
270 2 Current Version : 00.00.04.10
271 3 Older Version : 00.00.04.08
273 1. Add the 3 mins timeout during the controller initialize.
274 2. Add the fix for 64bit sense date errors.
276 1 Release Date : Tues. May 05, 2009 10:12:45 PST 2009 -
277 (emaild-id:megaraidlinux@lsi.com)
278 Bo Yang
280 2 Current Version : 00.00.04.08
281 3 Older Version : 00.00.04.06
283 1. Add the fix of pending in FW after deleted the logic drives.
284 2. Add the fix of deallocating memory after get pdlist.
286 1 Release Date : Tues. March 26, 2009 10:12:45 PST 2009 -
287 (emaild-id:megaraidlinux@lsi.com)
288 Bo Yang
290 2 Current Version : 00.00.04.06
291 3 Older Version : 00.00.04.04
293 1. Add the fix of the driver cmd empty fix of the driver cmd empty.
294 2. Add the fix of the driver MSM AEN CMD cause the system slow.
296 1 Release Date : Tues. March 03, 2009 10:12:45 PST 2009 -
297 (emaild-id:megaraidlinux@lsi.com)
298 Bo Yang
300 2 Current Version : 00.00.04.04
301 3 Older Version : 00.00.04.01
303 1. Add the Tape drive fix to the driver: If the command is for
304 the tape device, set the pthru timeout to the os layer timeout value.
306 2. Add Poll_wait mechanism to Gen-2 Linux driv.
307 In the aen handler, driver needs to wakeup poll handler similar to
308 the way it raises SIGIO.
310 3. Add new controller new SAS2 support to the driver.
312 4. Report the unconfigured PD (system PD) to OS.
314 5. Add the IEEE SGL support to the driver
316 6. Reasign the Application cmds to SAS2 controller
318 1 Release Date : Thur.July. 24 11:41:51 PST 2008 -
319 (emaild-id:megaraidlinux@lsi.com)
320 Sumant Patro
321 Bo Yang
323 2 Current Version : 00.00.04.01
324 3 Older Version : 00.00.03.22
326 1. Add the new controller (0078, 0079) support to the driver
327 Those controllers are LSI's next generatation(gen2) SAS controllers.
329 1 Release Date : Mon.June. 23 10:12:45 PST 2008 -
330 (emaild-id:megaraidlinux@lsi.com)
331 Sumant Patro
332 Bo Yang
334 2 Current Version : 00.00.03.22
335 3 Older Version : 00.00.03.20
337 1. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
338 2. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
340 1 Release Date : Mon. March 10 11:02:31 PDT 2008 -
341 (emaild-id:megaraidlinux@lsi.com)
342 Sumant Patro
343 Bo Yang
345 2 Current Version : 00.00.03.20-RC1
346 3 Older Version : 00.00.03.16
348 1. Rollback the sense info implementation
349 Sense buffer ptr data type in the ioctl path is reverted back
350 to u32 * as in previous versions of driver.
352 2. Fixed the driver frame count.
353 When Driver sent wrong frame count to firmware. As this
354 particular command is sent to drive, FW is seeing continuous
355 chip resets and so the command will timeout.
357 3. Add the new controller(1078DE) support to the driver
358 and Increase the max_wait to 60 from 10 in the controller
359 operational status. With this max_wait increase, driver will
360 make sure the FW will finish the pending cmd for KDUMP case.
362 1 Release Date : Thur. Nov. 07 16:30:43 PST 2007 -
363 (emaild-id:megaraidlinux@lsi.com)
364 Sumant Patro
365 Bo Yang
367 2 Current Version : 00.00.03.16
368 3 Older Version : 00.00.03.15
370 1. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take
371 a max of 60 seconds to respond to the INIT cmd.
373 1 Release Date : Fri. Sep. 07 16:30:43 PST 2007 -
374 (emaild-id:megaraidlinux@lsi.com)
375 Sumant Patro
376 Bo Yang
378 2 Current Version : 00.00.03.15
379 3 Older Version : 00.00.03.14
381 1. Added module parameter "poll_mode_io" to support for "polling"
382 (reduced interrupt operation). In this mode, IO completion
383 interrupts are delayed. At the end of initiating IOs, the
384 driver schedules for cmd completion if there are pending cmds
385 to be completed. A timer-based interrupt has also been added
386 to prevent IO completion processing from being delayed
387 indefinitely in the case that no new IOs are initiated.
389 1 Release Date : Fri. Sep. 07 16:30:43 PST 2007 -
390 (emaild-id:megaraidlinux@lsi.com)
391 Sumant Patro
392 Bo Yang
394 2 Current Version : 00.00.03.14
395 3 Older Version : 00.00.03.13
397 1. Setting the max_sectors_per_req based on max SGL supported by the
398 FW. Prior versions calculated this value from controller info
399 (max_sectors_1, max_sectors_2). For certain controllers/FW,
400 this was resulting in a value greater than max SGL supported
401 by the FW. Issue was first reported by users running LUKS+XFS
402 with megaraid_sas. Thanks to RB for providing the logs and
403 duplication steps that helped to get to the root cause of the
404 issue. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from
405 10. FW may take a max of 60 seconds to respond to the INIT
406 cmd.
408 1 Release Date : Fri. June. 15 16:30:43 PST 2007 -
409 (emaild-id:megaraidlinux@lsi.com)
410 Sumant Patro
411 Bo Yang
413 2 Current Version : 00.00.03.13
414 3 Older Version : 00.00.03.12
416 1. Added the megasas_reset_timer routine to intercept cmd timeout and throttle io.
418 On Fri, 2007-03-16 at 16:44 -0600, James Bottomley wrote:
419 It looks like megaraid_sas at least needs this to throttle its commands
420 > as they begin to time out. The code keeps the existing transport
421 > template use of eh_timed_out (and allows the transport to override the
422 > host if they both have this callback).
423 >
424 > James
426 1 Release Date : Sat May. 12 16:30:43 PST 2007 -
427 (emaild-id:megaraidlinux@lsi.com)
428 Sumant Patro
429 Bo Yang
431 2 Current Version : 00.00.03.12
432 3 Older Version : 00.00.03.11
434 1. When MegaSAS driver receives reset call from OS, driver waits in reset
435 routine for max 3 minutes for all pending command completion. Now driver will
436 call completion routine every 5 seconds from the reset routine instead of
437 waiting for depending on cmd completion from isr path.
439 1 Release Date : Mon Apr. 30 10:25:52 PST 2007 -
440 (emaild-id:megaraidlinux@lsi.com)
441 Sumant Patro
442 Bo Yang
444 2 Current Version : 00.00.03.11
445 3 Older Version : 00.00.03.09
447 1. Memory Manager for IOCTL removed for 2.6 kernels.
448 pci_alloc_consistent replaced by dma_alloc_coherent. With this
449 change there is no need of memory manager in the driver code
451 On Wed, 2007-02-07 at 13:30 -0800, Andrew Morton wrote:
452 > I suspect all this horror is due to stupidity in the DMA API.
453 >
454 > pci_alloc_consistent() just goes and assumes GFP_ATOMIC, whereas
455 > the caller (megasas_mgmt_fw_ioctl) would have been perfectly happy
456 > to use GFP_KERNEL.
457 >
458 > I bet this fixes it
460 It does, but the DMA API was expanded to cope with this exact case, so
461 use dma_alloc_coherent() directly in the megaraid code instead. The dev
462 is just &pci_dev->dev.
464 James <James.Bottomley@SteelEye.com>
466 3. SYNCHRONIZE_CACHE is not supported by FW and thus blocked by driver.
467 4. Hibernation support added
468 5. Performing diskdump while running IO in RHEL 4 was failing. Fixed.
470 1 Release Date : Fri Feb. 09 14:36:28 PST 2007 -
471 (emaild-id:megaraidlinux@lsi.com)
472 Sumant Patro
473 Bo Yang
475 2 Current Version : 00.00.03.09
476 3 Older Version : 00.00.03.08
478 i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors
480 The driver now waits for 10 seconds to elapse instead of 5 (as in
481 previous release) to resume IO.
483 1 Release Date : Mon Feb. 05 11:35:24 PST 2007 -
484 (emaild-id:megaraidlinux@lsi.com)
485 Sumant Patro
486 Bo Yang
487 2 Current Version : 00.00.03.08
488 3 Older Version : 00.00.03.07
490 i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors
492 Fix: The driver is now throttling IO.
493 Checks added in megasas_queue_command to know if FW is able to
494 process commands within timeout period. If number of retries
495 is 2 or greater,the driver stops sending cmd to FW temporarily. IO is
496 resumed if pending cmd count reduces to 16 or 5 seconds has elapsed
497 from the time cmds were last sent to FW.
499 ii. FW enables WCE bit in Mode Sense cmd for drives that are configured
500 as WriteBack. The OS may send "SYNCHRONIZE_CACHE" cmd when Logical
501 Disks are exposed with WCE=1. User is advised to enable Write Back
502 mode only when the controller has battery backup. At this time
503 Synhronize cache is not supported by the FW. Driver will short-cycle
504 the cmd and return success without sending down to FW.
506 1 Release Date : Sun Jan. 14 11:21:32 PDT 2007 -
507 Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
508 2 Current Version : 00.00.03.07
509 3 Older Version : 00.00.03.06
511 i. bios_param entry added in scsi_host_template that returns disk geometry
512 information.
514 1 Release Date : Fri Oct 20 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
515 2 Current Version : 00.00.03.06
516 3 Older Version : 00.00.03.05
518 1. Added new memory management module to support the IOCTL memory allocation. For IOCTL we try to allocate from the memory pool created during driver initialization. If mem pool is empty then we allocate at run time.
519 2. Added check in megasas_queue_command and dpc/isr routine to see if we have already declared adapter dead
520 (hw_crit_error=1). If hw_crit_error==1, now we donot accept any processing of pending cmds/accept any cmd from OS
522 1 Release Date : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
523 2 Current Version : 00.00.03.05
524 3 Older Version : 00.00.03.04
526 i. PCI_DEVICE macro used
528 Convert the pci_device_id-table of the megaraid_sas-driver to the PCI_DEVICE-macro, to safe some lines.
530 - Henrik Kretzschmar <henne@nachtwindheim.de>
531 ii. All compiler warnings removed
532 iii. megasas_ctrl_info struct reverted to 3.02 release
533 iv. Default value of megasas_dbg_lvl set to 0
534 v. Removing in megasas_exit the sysfs entry created for megasas_dbg_lvl
535 vi. In megasas_teardown_frame_pool(), cmd->frame was passed instead of
536 cmd->sense to pci_pool_free. Fixed. Bug was pointed out by
537 Eric Sesterhenn
539 1 Release Date : Wed Sep 13 14:22:51 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
540 2 Current Version : 00.00.03.04
541 3 Older Version : 00.00.03.03
543 i. Added Reboot notify
544 ii. Reduced by 1 max cmds sent to FW from Driver to make the reply_q_sz same
545 as Max Cmds FW can support
547 1 Release Date : Tue Aug 22 16:33:14 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
548 2 Current Version : 00.00.03.03
549 3 Older Version : 00.00.03.02
551 i. Send stop adapter to FW & Dump pending FW cmds before declaring adapter dead.
552 New varible added to set dbg level.
553 ii. Disable interrupt made as fn pointer as they are different for 1068 / 1078
554 iii. Frame count optimization. Main frame can contain 2 SGE for 64 bit SGLs and
555 3 SGE for 32 bit SGL
556 iv. Tasklet added for cmd completion
557 v. If FW in operational state before firing INIT, now we send RESET Flag to FW instead of just READY. This is used to do soft reset.
558 vi. megasas_ctrl_prop structure updated (based on FW struct)
559 vii. Added print : FW now in Ready State during initialization
561 1 Release Date : Sun Aug 06 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
562 2 Current Version : 00.00.03.02
563 3 Older Version : 00.00.03.01
565 i. Added FW tranistion state for Hotplug scenario
567 1 Release Date : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
568 2 Current Version : 00.00.03.01
569 3 Older Version : 00.00.02.04
571 i. Added support for ZCR controller.
573 New device id 0x413 added.
575 ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW.
577 Interrupt is enabled after required initialization is over.
578 This is done to ensure that driver is ready to handle interrupts when
579 it is generated by the controller.
581 -Sumant Patro <Sumant.Patro@lsil.com>
583 1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
584 2 Current Version : 00.00.02.04
585 3 Older Version : 00.00.02.04
587 i. Remove superfluous instance_lock
589 gets rid of the otherwise superfluous instance_lock and avoids an unsafe
590 unsynchronized access in the error handler.
592 - Christoph Hellwig <hch@lst.de>
595 1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
596 2 Current Version : 00.00.02.04
597 3 Older Version : 00.00.02.04
599 i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
600 During initialization, depending on the device id, the template members
601 are initialized with function pointers specific to the ppc or
602 xscale controllers.
604 -Sumant Patro <Sumant.Patro@lsil.com>
606 1 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro
607 <Sumant.Patro@lsil.com>
608 2 Current Version : 00.00.02.04
609 3 Older Version : 00.00.02.02
610 i. Register 16 byte CDB capability with scsi midlayer
612 "This patch properly registers the 16 byte command length capability of the
613 megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas
614 hardware supports 16 byte CDB's."
616 -Joshua Giles <joshua_giles@dell.com>
618 1 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
619 2 Current Version : 00.00.02.02
620 3 Older Version : 00.00.02.01
622 i. New template defined to represent each family of controllers (identified by processor used).
623 The template will have definitions that will be initialised to appropriate values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
625 -Sumant Patro <Sumant.Patro@lsil.com>
627 1 Release Date : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com>
628 2 Current Version : 00.00.02.00-rc4
629 3 Older Version : 00.00.02.01
631 i. Code reorganized to remove code duplication in megasas_build_cmd.
633 "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepaths and merge the reminder of megasas_build_cmd into megasas_queue_command"
635 - Christoph Hellwig <hch@lst.de>
637 ii. Defined MEGASAS_IOC_FIRMWARE32 for code paths that handles 32 bit applications in 64 bit systems.
639 "MEGASAS_IOC_FIRMWARE can't be redefined if CONFIG_COMPAT is set, we need to define a MEGASAS_IOC_FIRMWARE32 define so native binaries continue to work"
641 - Christoph Hellwig <hch@lst.de>