drivers/gpio/gpio-sch.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * GPIO interface for Intel Poulsbo SCH
   4  *
   5  *  Copyright (c) 2010 CompuLab Ltd
   6  *  Author: Denis Turischev <denis@compulab.co.il>
   7  */
   8
   9 #include <linux/acpi.h>
  10 #include <linux/errno.h>
  11 #include <linux/gpio/driver.h>
  12 #include <linux/io.h>
  13 #include <linux/kernel.h>
  14 #include <linux/module.h>
  15 #include <linux/pci_ids.h>
  16 #include <linux/platform_device.h>
  17
  18 #define GEN     0x00
  19 #define GIO     0x04
  20 #define GLV     0x08
  21
  22 struct sch_gpio {
  23         struct gpio_chip chip;
  24         spinlock_t lock;
  25         unsigned short iobase;
  26         unsigned short resume_base;
  27 };
  28
  29 static unsigned sch_gpio_offset(struct sch_gpio *sch, unsigned gpio,
  30                                 unsigned reg)
  31 {
  32         unsigned base = 0;
  33
  34         if (gpio >= sch->resume_base) {
  35                 gpio -= sch->resume_base;
  36                 base += 0x20;
  37         }
  38
  39         return base + reg + gpio / 8;
  40 }
  41
  42 static unsigned sch_gpio_bit(struct sch_gpio *sch, unsigned gpio)
  43 {
  44         if (gpio >= sch->resume_base)
  45                 gpio -= sch->resume_base;
  46         return gpio % 8;
  47 }
  48
  49 static int sch_gpio_reg_get(struct sch_gpio *sch, unsigned gpio, unsigned reg)
  50 {
  51         unsigned short offset, bit;
  52         u8 reg_val;
  53
  54         offset = sch_gpio_offset(sch, gpio, reg);
  55         bit = sch_gpio_bit(sch, gpio);
  56
  57         reg_val = !!(inb(sch->iobase + offset) & BIT(bit));
  58
  59         return reg_val;
  60 }
  61
  62 static void sch_gpio_reg_set(struct sch_gpio *sch, unsigned gpio, unsigned reg,
  63                              int val)
  64 {
  65         unsigned short offset, bit;
  66         u8 reg_val;
  67
  68         offset = sch_gpio_offset(sch, gpio, reg);
  69         bit = sch_gpio_bit(sch, gpio);
  70
  71         reg_val = inb(sch->iobase + offset);
  72
  73         if (val)
  74                 outb(reg_val | BIT(bit), sch->iobase + offset);
  75         else
  76                 outb((reg_val & ~BIT(bit)), sch->iobase + offset);
  77 }
  78
  79 static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num)
  80 {
  81         struct sch_gpio *sch = gpiochip_get_data(gc);
  82
  83         spin_lock(&sch->lock);
  84         sch_gpio_reg_set(sch, gpio_num, GIO, 1);
  85         spin_unlock(&sch->lock);
  86         return 0;
  87 }
  88
  89 static int sch_gpio_get(struct gpio_chip *gc, unsigned gpio_num)
  90 {
  91         struct sch_gpio *sch = gpiochip_get_data(gc);
  92         return sch_gpio_reg_get(sch, gpio_num, GLV);
  93 }
  94
  95 static void sch_gpio_set(struct gpio_chip *gc, unsigned gpio_num, int val)
  96 {
  97         struct sch_gpio *sch = gpiochip_get_data(gc);
  98
  99         spin_lock(&sch->lock);
 100         sch_gpio_reg_set(sch, gpio_num, GLV, val);
 101         spin_unlock(&sch->lock);
 102 }
 103
 104 static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num,
 105                                   int val)
 106 {
 107         struct sch_gpio *sch = gpiochip_get_data(gc);
 108
 109         spin_lock(&sch->lock);
 110         sch_gpio_reg_set(sch, gpio_num, GIO, 0);
 111         spin_unlock(&sch->lock);
 112
 113         /*
 114          * according to the datasheet, writing to the level register has no
 115          * effect when GPIO is programmed as input.
 116          * Actually the the level register is read-only when configured as input.
 117          * Thus presetting the output level before switching to output is _NOT_ possible.
 118          * Hence we set the level after configuring the GPIO as output.
 119          * But we cannot prevent a short low pulse if direction is set to high
 120          * and an external pull-up is connected.
 121          */
 122         sch_gpio_set(gc, gpio_num, val);
 123         return 0;
 124 }
 125
 126 static int sch_gpio_get_direction(struct gpio_chip *gc, unsigned gpio_num)
 127 {
 128         struct sch_gpio *sch = gpiochip_get_data(gc);
 129
 130         return sch_gpio_reg_get(sch, gpio_num, GIO);
 131 }
 132
 133 static const struct gpio_chip sch_gpio_chip = {
 134         .label                  = "sch_gpio",
 135         .owner                  = THIS_MODULE,
 136         .direction_input        = sch_gpio_direction_in,
 137         .get                    = sch_gpio_get,
 138         .direction_output       = sch_gpio_direction_out,
 139         .set                    = sch_gpio_set,
 140         .get_direction          = sch_gpio_get_direction,
 141 };
 142
 143 static int sch_gpio_probe(struct platform_device *pdev)
 144 {
 145         struct sch_gpio *sch;
 146         struct resource *res;
 147
 148         sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL);
 149         if (!sch)
 150                 return -ENOMEM;
 151
 152         res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 153         if (!res)
 154                 return -EBUSY;
 155
 156         if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
 157                                  pdev->name))
 158                 return -EBUSY;
 159
 160         spin_lock_init(&sch->lock);
 161         sch->iobase = res->start;
 162         sch->chip = sch_gpio_chip;
 163         sch->chip.label = dev_name(&pdev->dev);
 164         sch->chip.parent = &pdev->dev;
 165
 166         switch (pdev->id) {
 167         case PCI_DEVICE_ID_INTEL_SCH_LPC:
 168                 sch->resume_base = 10;
 169                 sch->chip.ngpio = 14;
 170
 171                 /*
 172                  * GPIO[6:0] enabled by default
 173                  * GPIO7 is configured by the CMC as SLPIOVR
 174                  * Enable GPIO[9:8] core powered gpios explicitly
 175                  */
 176                 sch_gpio_reg_set(sch, 8, GEN, 1);
 177                 sch_gpio_reg_set(sch, 9, GEN, 1);
 178                 /*
 179                  * SUS_GPIO[2:0] enabled by default
 180                  * Enable SUS_GPIO3 resume powered gpio explicitly
 181                  */
 182                 sch_gpio_reg_set(sch, 13, GEN, 1);
 183                 break;
 184
 185         case PCI_DEVICE_ID_INTEL_ITC_LPC:
 186                 sch->resume_base = 5;
 187                 sch->chip.ngpio = 14;
 188                 break;
 189
 190         case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
 191                 sch->resume_base = 21;
 192                 sch->chip.ngpio = 30;
 193                 break;
 194
 195         case PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB:
 196                 sch->resume_base = 2;
 197                 sch->chip.ngpio = 8;
 198                 break;
 199
 200         default:
 201                 return -ENODEV;
 202         }
 203
 204         platform_set_drvdata(pdev, sch);
 205
 206         return devm_gpiochip_add_data(&pdev->dev, &sch->chip, sch);
 207 }
 208
 209 static struct platform_driver sch_gpio_driver = {
 210         .driver = {
 211                 .name = "sch_gpio",
 212         },
 213         .probe          = sch_gpio_probe,
 214 };
 215
 216 module_platform_driver(sch_gpio_driver);
 217
 218 MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
 219 MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
 220 MODULE_LICENSE("GPL v2");
 221 MODULE_ALIAS("platform:sch_gpio");